Civil, Construction and Environmental Engineering - 1987

Ham, R. K., & Barlaz, M. A. (1987). Measurement and Prediction of Landfill Gas Quality and Quantity. Presented at the International Solid Waste Association Symposium on Process, Technology and Environmental Impact of Sanitary Landfills, Cagliari, Sardinia, Italy.

Maruyama, K., & Rizkalla, S. (1987). Shear Behavior of Pretensioned Prestressed Concrete Beams. Transactions of the Japan Concrete Institute, 9, 411–416.

Ray, A., & Rizkalla, S. (1987). Discussion of “Transverse Stirrup Spacing in R/C Beams” by Wayne Hsiung and Gregory C. Frantz (February, 1985, Vol. 111, No. 2). Structural Engineering Journal, 113(1), 174–175.

Xuan, X., & Rizkalla, S. (1987). Shear Strength of Prestressed Concrete T-beams with Welded Wire Fabric as Shear Reinforcement, Discussion. PCI Journal, 32(6), 142–143.

McCulloch, W. J., Militano, C., & Rizkalla, S. (1987). Behavioral load testing of the Disraeli facility. Canadian Journal of Civil Engineering, 14(1), 103–110. https://doi.org/10.1139/l87-013

Van Oudheusden, D. L., Ranjithan, S., & Singh, K. N. (1987). The design of bus route systems — An interactive location-allocation approach. Transportation, 14(3), 253–270. https://doi.org/10.1007/bf00837532

Tinkler, J., Del Frate, R., & Rizkalla, S. (1987). The prediction of air leakage rates through cracks in pressurized reinforced concrete containment vessels. International Journal of Pressure Vessels and Piping, 29(1), 33–46. https://doi.org/10.1016/0308-0161(87)90037-8

Domaschuk, L., Rizkalla, S., & Kwok, R. (1987). Inadequate shallow foundations. Batiment International, Building Research and Practice, 15(1-6), 224–230. https://doi.org/10.1080/09613218708726821

Barlaz, M., Milke, M., & Ham, R. (1987). Gas production parameters in sanitary landfill simulators. Waste Management & Research, 5(1), 27–39. https://doi.org/10.1016/0734-242x(87)90032-2

Yacout, A. M., Dunn, W. L., Rasdorf, W., & Turinsky, P. J. (1987). An expert system operator aid for nuclear power plant maneuvers. In Technical Report- Not held in TRLN member libraries. Washington, D.C.: U.S. Department of Energy.

Rasdorf, W. J., & Wang, T. E. (1987). Generic design standards processing in a knowledge-based expert system environment. Proceedings of the Workshop on the Design Process, 267–291. Oakland, CA: Design Theory and Methodology Program, National Science Foundation.

Rasdorf, W. J., & High, S. L. (1987). Simplified steel compression member design. Proceedings of the 1987 ASCE Structures Congress. Vol. D, Dynamics of structures, 352–367. Orlando, FL: American Society of Civil Engineers.

Holtz, N. M., & Rasdorf, W. J. (1987). Procedural programming languages for the development of CAD and CAE system software. Computers in engineering, 1987: Proceedings of the 1987 ASME International Computers in Engineering Conference and Exhibition, August 9-13, 1987, New York, New York. Vol. 2, 387–392. New York, NY: American Society of Mechanical Engineers.

Rasdorf, W. J. (1987). Extending database management systems for engineering applications. Computers in Mechanical Engineering, 5(5), 62–69.

Rasdorf, W. J., & Storaasli, O. O. (1987). Educational fundamentals of computer-aided engineering. International Journal of Applied Engineering Education, 3(3), 247–254.

Chao, A. C., Rasdorf, W. J., & Paige, W. (1987). Classifying industrial sludge using a knowledge-based expert system. Proceedings of the 42nd Industrial Waste Conference: May 12, 13, 14, 1987, Purdue University, West Lafayette, Indiana, 399–405. West Lafayette, IN: School of Civil Engineering, Purdue University.

Rasdorf, W. J., & Watson, B. R. (1987). A knowledge-based approach to engineering information retrieval and management. In Expert systems in construction and structural engineering (pp. 267–295). https://doi.org/10.4324/9780203401101_chapter_13

Rasdorf, W. J., & Wang, T. E. (1987). SPIKE: A generic design standards processing expert system. In D. Sriram & R. A. Adey (Eds.), Knowledge based systems in engineering: Planning and design (pp. 241–257). Southampton, UK; Boston, MA: Computational Mechanics.

Rasdorf, W. J., & Parks, L. M. (1987). Natural language prototypes for analyzing design standards. In D. Sriram & R. A. Adey (Eds.), Artificial intelligence in engineering tools and techniques (pp. 147–160). https://doi.org/10.1016/0954-1810(87)90166-x

RASDORF, W. J., ULBERG, K. J., & BAUGH, J. W. (1987). A STRUCTURE-BASED MODEL OF SEMANTIC INTEGRITY CONSTRAINTS FOR RELATIONAL DATABASES. ENGINEERING WITH COMPUTERS, 2(1), 31–39. https://doi.org/10.1007/BF01200175

HAVNER, K. S., & CHIDAMBARRAO, D. (1987). ANALYSIS OF A FAMILY OF UNSTABLE LATTICE ORIENTATIONS IN (110) CHANNEL DIE COMPRESSION. ACTA MECHANICA, 69(1-4), 243–269. https://doi.org/10.1007/BF01175724

Havner, K. S. (1987). On the continuum mechanics of crystal slip. Continuum models of discrete systems: Proceedings of the Fifth International Symposium on Continuum Models of Discrete Systems, Nottingham, 14-20 July, 1985, 47–59. Rotterdam; Boston: A.A. Balkema.