Civil, Construction and Environmental Engineering - 2008 Zhai, H., Frey, H. C., Rouphail, N. M., Gon?alves, G. A., & Farias, T. L. (2008). Impact of alternative vehicle technologies on measured vehicle emissions. Transportation Land Use, Planning, and Air Quality - Proceedings of the 2007 Transportation Land Use, Planning, and Air Quality Conference, 320, 408–414. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-57549103716&partnerID=MN8TOARS The Effect of Environmental Selection Mechanisms on Microbial Ecological Succession During Refuse Decomposition. (2008). Abstracts of the General Meeting of the American Society for Microbiology. Retrieved from https://publons.com/wos-op/publon/15001856/ Optimizing Sampling and Handling of Groundwater and Sediment for Molecular Biological Analysis. (2008). Abstracts of the General Meeting of the American Society for Microbiology. Retrieved from https://publons.com/wos-op/publon/15001857/ Microbial Function and Resilience during Shock Loading of Highly Degradable Substrates into Solid Waste. (2008). Abstracts of the General Meeting of the American Society for Microbiology. Retrieved from https://publons.com/wos-op/publon/15001855/ Benekohal, R. F., Chitturi, M. V., Hajbabaie, A., Wang, M.-H., & Medina, J. C. (2008). Automated Speed Photo Enforcement Effects on Speeds in Work Zones. The 87th Annual Meeting of the Transportation Research Board. Presented at the 87th Annual Meeting of the Transportation Research Board, Washington, DC. Benekohal, R. F., Hajbabaie, A., Chitturi, M. V., Wang, M.-H., & Medina, J. C. (2008). Automated Speed Enforcement Effects on Speeding and Platooning in Work Zones. The 10th International Conference on Applications of Advanced Technologies in Transportation. Presented at the 10th International Conference on Applications of Advanced Technologies in Transportation, Athens, Greece. Knappe, D. R. U., & Yuncu, B. (2008). Use of high-silica zeolites for the targeted removal of taste and odor compounds from drinking water. ACS, Division of Environmental Chemistry - Preprints of Extended Abstracts, 48(1), 65–69. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85025618087&partnerID=MN8TOARS Summers, R. S., Dani, D., Zachman, B., Corwin, C., Blute, N., McGuire, M., & Knappe, D. (2008). MTBE adsorption: Evaluating EBCT, competition and fouling in the microgram/liter range. ACS National Meeting Book of Abstracts, 48(1), 45–49. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-77955619742&partnerID=MN8TOARS Oliveira, F. A., Queiroz, A. R., Lima, J. W. M., Ieee, S. M., & Balestrassi, P. P. (2008). The influence of operational marginal cost simulation methods on electricity contract portfolio strategies in Brazil. 16th Power Systems Computation Conference, PSCC 2008. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84944097160&partnerID=MN8TOARS Gallimore, E., & Ducoste, J. J. (2008). Performance of Grease Interceptors: Evaluating Design Alternatives. Poster presented at the North Carolina American Water Works Association (AWWA) & Water Environment Association (WEA) 88th Annual Conference, Winston Salem, NC. Sobrimisana, A., Reyes, F., & Ducoste, J. (2008). A Numerical Approach for Modeling Carbon and Nitrogen Removal under the Influence of Floc Size Distribution. Poster presented at the North Carolina American Water Works Association (AWWA) & Water Environment Association (WEA) 88th Annual Conference, Winston Salem, NC. Ducoste, J. (2008). Improving our Understanding of Complex Reacting Processes in Water and Wastewater Treatment through Computational Fluid Dynamics. Presented at the National Academy of Engineering Frontiers of Engineering Conference, Kobe, Japan. Ducoste, J., Aziz, T., Buckley, T., Movahed, Z., Card, C., & Gallimore, E. (2008). Design Considerations for Volume Based Grease Interceptors. Presented at the Chesapeake Water Environment Association Conference on Collection Systems, Linthicum, MD. Hyunsuk, H., Williams, J. C., Hsieh, J., Ducoste, J., & de los Reyes, F. L. (2008). Floc Size Control and Microbial Shifts during Aerobic Flocculation in Couette-Taylor Bioreactors. Presented at the International Water Association Leading edge conference, Zurich, Switzerland, Ducoste, J. J., Wood, J., Aziz, T., Groninger, J., Holt, L., & Keener, K. (2008). Rooting out SSOs: Evaluating Popular Root Control Methods in a Pilot Sanitary Sewer. Water Environment Technology, 20(6), 56–60. Ducoste, J. J. (2008). Analysis of Fat, Oil, and Grease Deposits in Sanitary Sewer Systems. Presented at the Borchardt Conference, University of Michigan, Ann Arbor, MI. Ducoste, J. J. (2008). Analysis of Grease Interceptors for the Removal of FAT, Oil, and Grease (FOG): Are they Sufficient to Stop FOG related Sanitary Sewer Overflows. Presented at the Civil and Environmental Engineering Department, Arizona State University, Tempe, AZ. Ducoste, J. J. (2008). Modeling UV reactors in Drinking Water Systems. Presented at the Chemical Engineering Department, Mississippi State University, Starkville, MS. Ducoste, J. J. (2008). Analysis of FAT, Roots, Oil, and Grease (FROG) in Sanitary Sewers. Presented at the Capacity, Management, Operation & Maintenance (CMOM) Conference, Austin, TX. Ducoste, J. J. (2008). Some Thoughts on CFD Modeling for Membrane Bioreactor Processes. Presented at the 2nd Workshop CFD Modeling for MBR Applications, Ghent University, Belgium. Ducoste, J. J. (2008). An Overview of Computational Fluid Dynamics Modeling. Presented at the MBR Training Seminar, Ghent University, Belgium. Ducoste, J. J. (2008). An Introduction to Population Balance Modeling. Presented at the MBR Training Seminar, Ghent University, Belgium. Ducoste, J. J., Keener, K., Groninger, J., & Holt, L. (2008). FOG Interceptor Design and Operation (FOGIDO) Guidance Manual. Alexandria, VA: Water Environment Research Foundation. Ducoste, J. J. (2008). FAT, Roots, Oil, and Grease (FROG) in Sanitary Sewers: Results from a Recent WERF Sponsored Study. Presented at the Water Environment Research Foundation Webinar. Ducoste, J. J., Keener, K., Groninger, J., & Holt, L. (2008). Assessment of Grease Interceptor Performance. Alexandria, VA: Water Environment Research Foundation. Ducoste, J. J. (2008). Analysis and Design of Grease Interceptors. Presented at the Water Environment Technology Conference, Chicago, IL. Ducoste, J. J., Keener, K., Groninger, J., & Holt, L. (2008). Fats, Roots, Oil, and Grease (FROG). Presented at the Centralized and Decentralized Systems: Characterization FOG Deposits and Root Control, Water Environment Research Foundation, Alexandria, VA. Ducoste, J. J. (2008). Analysis of FOG and Roots in Sewer Collection systems. Presented at the Water Environment Research Foundation Forum, Clearwater Beach, FL. DeLa Cruz, F., & Barlaz, M. A. (2008). A Method to Estimate Carbon Sequestration from Excavated Refuse Samples. Presented at the Intercontinental Landfill Research Symposium, Copper Mountain, CO. Barlaz, M. A., Sadri, A., von Pein, R., & Luettich, S. (2008). Refuse Decomposition at Elevated Temperature: An Analysis of Biological Processes at the Waimanalo Gulch Sanitary Landfill. Presented at the Intercontinental Landfill Research Symposium, Copper Mountain, CO. Staley, B. F., de los Reyes, F. L., & Barlaz, M. A. (2008). Evaluation of Factors Affecting the Initiation of Methanogenesis in Solid Waste. Presented at the Global Waste Management Symposium, Copper Mountain, CO. Augenstein, D., Yazdani, R., Imhoff, P., Bentley, H., Barlaz, M. A., & Benemann, J. (2008). Variable Landfill Gas Recovery for Peaking Energy. Presented at the Global Waste Management Symposium, Copper Mountain, CO. Goldsmith, C. D., Green, R., Abichou, T., Barlaz, M. A., & Chanton, J. C. (2008). Comparison of Optical Remote Sensing with Static Chambers for Quantification of Landfill Methane Emission. Presented at the Global Waste Management Symposium, Copper Mountain, CO. Breitmeyer, R. J., Bareither, C. A., Benson, C. H., Edil, T. B., & Barlaz, M. A. (2008). Field-Scale Lysimeter Experiment to Study Hydrologic and Mechanical Properties of Municipal Solid Waste. Presented at the Global Waste Management Symposium, Copper Mountain, CO. Bareither, C. A., Breitmeyer, R. J., Erses, S., Benson, C. H., Edil, T. B., & Barlaz, M. A. (2008). Relative Contributions of Moisture and Biological Activity on Compression of Municipal Solid Waste in Bioreactor Landfills. Presented at the Global Waste Management Symposium, Copper Mountain, CO. Padgett, J. M., Breitmeyer, R. J., Bareither, C. A., Barlaz, M. A., & Benson, C. H. (2008). Biodegradability of Forest Products Under Laboratory and Bioreactor landfill Conditions. Presented at the Global Waste Management Symposium, Copper Mountain, CO. Saquing, J. M., Knappe, D. R. U., & Barlaz, M. A. (2008). Estimating Sorption Equilibrium and Kinetic Parameters for Organic Contaminants in Landfills. Presented at the Global Waste Management Symposium, Copper Mountain, CO. Reale-Levis, J. W., Barlaz, M. A., & Ranjithan, S. R. (2008). A Life-Cycle Inventory of Alternatives for the Management of Commercial Food Waste. Presented at the Global Waste Management Symposium, Copper Mountain, CO. Staley, B. F., de los Reyes, F. L., & Barlaz, M. A. (2008). The Effect of Environmental Selection Mechanisms on Microbial Ecological Succession During Refuse Decomposition. Presented at the American Society for Microbiology 108th General Meeting, Boston, MA. Staley, B. F., So, M. J. S., de los Reyes, F. L., & Barlaz, M. A. (2008). Microbial Function and Resilience During Shock Loading of Highly Degradable Substrates into Solid Waste. Presented at the American Society for Microbiology 108th General Meeting, Boston, MA. Barlaz, M. A. (2008). Methane Production, Collection and Management in Municipal Waste Landfills. Invited lecture presented at the University of Queensland, Brisbane, Australia. Barlaz, M. A. (2008). The Fate of Carbon in Municipal Waste Landfills: Methane, Carbon Dioxide and Carbon Sequestration. Presented at the Lecture tour sponsored by the Waste Management Association of Australia, Perth, Adelaide, Melbourne, and Sydney, Australia. Zechman, E. M. (2008). An Agent-Based Simulation-Optimization Approach to Identify Threat Management Strategies for Water Distribution Systems. World Environmental and Water Resources Congress 2008. Presented at the World Environmental and Water Resources Congress 2008. https://doi.org/10.1061/40976(316)506 Arumugam, S. (2008, January). Role of Climate Forecasts in Meeting NC Future Water Supply Challenges. Presented at the North Carolina Society of Engineers. Li, W., & Arumugam, S. (2008, October). Improving Hydrological Predictions through better representation of Model Uncertainty. Presented at the North Carolina Water Resources Research Institute Annual Conference, Raleigh, NC. Oh, J., & Arumugam, S. (2008, October). Role of Streamflow Seasonality in Influencing Water Quality Variability in the Southeastern US. Presented at the North Carolina Water Resources Research Institute Annual Conference, Raleigh, NC. Devineni, N., & Arumugam, S. (2008, October). Improved Drought Management of Falls Lake Reservoir: Role of Multimodel Streamflow Forecasts in Setting up Restrictions. Presented at the North Carolina Water Resources Research Institute Annual Conference, Raleigh, NC. Arumugam, S., & Li, W. (2008). The Role of Multimodel Combinations in improving Streamflow Prediction. Presented at the American Geophysical Union Fall Meeting, San Francisco, CA. Borlaz, M. (2008). EPA Organics Workshop. Presented at the EPA Organics Workshop, Washington, DC. Kim, Y. R., Lee, Y.-C., & Ranjithan, S. R. (2008). Flexible Pavement Condition Evaluation Using Deflection Basin Parameters and Dynamic Finite Element Analysis Implemented by Artificial Neural Networks. In S. Tayabji & E. Lukanen (Eds.), Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume (pp. 514–530). https://doi.org/10.1520/stp14788s Jaunich, M. K., Raje, S., Mitra, K., Grace, M. S., Fahey, M., & Spooner, G. (2008). Ultra-short pulsed laser tissue ablation using focused laser beam. Progress in Biomedical Optics and Imaging - Proceedings of SPIE, 6854. https://doi.org/10.1117/12.764200 Jaunich, M., Raje, S., Kim, K., Mitra, K., & Guo, Z. (2008). Bio-heat transfer analysis during short pulse laser irradiation of tissues. International Journal of Heat and Mass Transfer, 51(23-24), 5511–5521. https://doi.org/10.1016/j.ijheatmasstransfer.2008.04.033 Kowalsky, M. J., & Sritharan, S. (Eds.). (2008). M.J. Nigel Priestley Symposium: August 4-5, 2008, North Tahoe Conference Center, King's Beach, California. Pavia, Italy: IUSS Press. Jaselskis, E. J., Strong, K. C., Aveiga, F., Canales, A. R., & Jahren, C. (2008). Successful multi-national workforce integration program to improve construction site performance. Safety Science, 46(4), 603–618. https://doi.org/10.1016/j.ssci.2007.06.023 Wang, T., Mao, J., Johnson, J., Reck, B. K., & Graedel, T. E. (2008). Anthropogenic metal cycles in China. Journal of Material Cycles and Waste Management, 10(2), 188–197. https://doi.org/10.1007/s10163-008-0203-7 Johnson, J., & Graedel, T. E. (2008). The “Hidden” Trade of Metals in the United States. Journal of Industrial Ecology, 12(5-6), 739–753. https://doi.org/10.1111/j.1530-9290.2008.00092.x Johnson, J., Reck, B. K., Wang, T., & Graedel, T. E. (2008). The energy benefit of stainless steel recycling. Energy Policy, 36(1), 181–192. https://doi.org/10.1016/j.enpol.2007.08.028 Call, D., & Logan, B. E. (2008). Hydrogen Production in a Single Chamber Microbial Electrolysis Cell Lacking a Membrane. Environmental Science & Technology, 42(9), 3401–3406. https://doi.org/10.1021/es8001822 Logan, B. E., Call, D., Cheng, S., Hamelers, H. V. M., Sleutels, T. H. J. A., Jeremiasse, A. W., & Rozendal René A. (2008). Microbial Electrolysis Cells for High Yield Hydrogen Gas Production from Organic Matter. Environmental Science & Technology, 42(23), 8630–8640. https://doi.org/10.1021/es801553z Kumar, J., Brill, E. D., Ranjithan, S. R., Mahinthakumar, G., & Uber, J. (2008). Source Identification for Contamination Events Involving Reactive Contaminants. World Environmental and Water Resources Congress 2008. Presented at the World Environmental and Water Resources Congress 2008. https://doi.org/10.1061/40976(316)504 Liu, L., Brill, Jr., E. D., Mahinthakumar, G., & Ranjithan, S. (2008). Contaminant Source Characterization Using Logistic Regression and Local Search Methods. World Environmental and Water Resources Congress 2008. Presented at the World Environmental and Water Resources Congress 2008. https://doi.org/10.1061/40976(316)503 Zechman, E. M., Brill, Jr., E. D., Mahinthakumar, G., Ranjithan, S., & Uber, J. (2008). Addressing Non-uniqueness in a Water Distribution Contaminant Source Identification Problem. Water Distribution Systems Analysis Symposium 2006. Presented at the Eighth Annual Water Distribution Systems Analysis Symposium (WDSA). https://doi.org/10.1061/40941(247)126 Liu, L., Zechman, E. M., Brill, Jr., E. D., Mahinthakumar, G., Ranjithan, S., & Uber, J. (2008). Adaptive Contamination Source Identification in Water Distribution Systems Using an Evolutionary Algorithm-based Dynamic Optimization Procedure. Water Distribution Systems Analysis Symposium 2006. Presented at the Eighth Annual Water Distribution Systems Analysis Symposium (WDSA). https://doi.org/10.1061/40941(247)123 Zhao, X., & Ducoste, J. (2008). Analysis of a LPHO UV reactor under multiple upstream elbow configurations using UV sensitive fluorescent microspheres. American Water Works Association - American Water Works Association Association Annual Conference and Exposition, ACE 2008, 179–190. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84871769914&partnerID=MN8TOARS Bowders, J. J., Gabr, M. A., Collazos, O. M., & Quaranta, J. D. (2008). Prefabricated Vertical Drains for Enhanced In Situ Remediation. Geosynthetics Research and Development in Progress. https://doi.org/10.1061/40782(161)34 Benekohal, R. F., Chitturi, M. V., Hajbabaie, A., Wang, M.-H., & Medina, J. C. (2008). Automated speed photo enforcement effects on speeds in work zones. Transportation Research Record, 2055(1), 11–20. https://doi.org/10.3141/2055-02 Frey, H. C. (2008). What is uncertainty analysis and how can it be performed? Toxicology Letters, 180, 3. https://doi.org/10.1016/j.toxlet.2008.06.016 Frey, H. C., Pang, S.-H., & Kim, K. (2008). Vehicle-specific emissions modeling for non-road construction vehicles based upon real-world measurements. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 5, 2743–2749. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-70449336768&partnerID=MN8TOARS Frey, H. C., Kuo, P.-Y., & Villa, C. (2008). Measurement and modeling of fuel use and exhaust emissions from idling Long-haul freight truck and auxiliary power unit engines. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 5, 3060–3064. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-70449497001&partnerID=MN8TOARS Zhai, H., Frey, H. C., Rouphail, N. M., Gonçalves, G. A., & Farias, T. L. (2008). Impact of Alternative Vehicle Technologies on Measured Vehicle Emissions. Transportation Land Use, Planning, and Air Quality, 320. https://doi.org/10.1061/40960(320)38 Frey, H. C., & Choi, H.-W. (2008). Estimating light duty gasoline vehicle emission factors at high transient and constant speeds for short road segments to support near-roadway air quality studies. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 5, 3137–3148. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-70449500370&partnerID=MN8TOARS Zhai, H., Frey, H. C., Rouphail, N. M., Gonçalves, G. A., & Farias, T. L. (2008). Comparison of fuel consumption and tailpipe emissions of ethanol 85 and gasoline for flexible fuel vehicles. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 5, 3262–3276. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-70449498143&partnerID=MN8TOARS Özkaynak, H., Frey, H. C., & Hubbell, B. (2008). Characterizing variability and uncertainty in exposure assessments improves links to environmental decision-making. EM: Air and Waste Management Association's Magazine for Environmental Managers, pp. 18–22. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-47749136225&partnerID=MN8TOARS Dietrich, J. C., Kolar, R. L., Asce, M., & Dresback, K. M. (2008). Mass residuals as a criterion for mesh refinement in continuous Galerkin shallow water models. Journal of Hydraulic Engineering-Asce, 134(5), 520–532. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:5(520) Surfactant-assisted electrospun metal nanoparticle-polysaccharide based polymer blend nanofibers for biomedical applications. (2008). AIChE Annual Meeting, Conference Proceedings. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-79952291675&partnerID=MN8TOARS Reyes, F. L. (2008). Quantifying the In Situ Growth Rate of a Filament and a Floc-former in Activated Sludge. Proc Water Environ Fed, 2008(11), 4660–4671. https://doi.org/10.2175/193864708788804658 Hong, H., Williams, J. C., Hsieh, J., Ducoste, J. J., & Reyes, F. L. de los. (2008). Monitoring Microbial Shifts during Activated Sludge Floc and Aerobic Granule Development. Proceedings of the Water Environment Federation, 2008(11), 4672–4678. https://doi.org/10.2175/193864708788805170 Baek, C., Underwood, B. S., Subramanian, V., Guddati, M. N., Kim, Y. R., & Lee, K. (2008). Viscoelastic continuum damage model based finite element analysis of fatigue cracking. 7th RILEM International Conference on Cracking in Pavements. Underwood, B. S., Krim, Y. R., Seo, Y., & Lee, K. H. (2008). Development of ViscoElastoPlastic Continuum Damage (VEPCD) model for response prediction of HMAs under tensile loading. KSCE Journal of Civil Engineering, 28(1), 45–55. Comparison of automated and manual data collection for pavement distresses. (2008). National Workshop on Highway Asset Inventory and Data Collection. Havner, K. S. (2008). Finite plastic deformation of crystalline solids (paperback re-issue). Cambridge: Cambridge University Press. Gabr, M. A., Borden, R. H., Smith, A. W., Denton, R. L., Eggleston, D. B., & Broome, S. W. (2008). Sustainability In coastal construction: Characterization and ecological impact of jetting-induced disturbance zones. New Horizons in Geotechnical and Geoenvironmental Engineering, Tanta University, Egypt, September 2008. Hossain, S., Gabr, M. A., & Haque, M. A. (2008). Deformation of MSW Bioreactor Landfills: Properties and Analysis Approach. GeoCongress 2008, 177, 216–223. https://doi.org/10.1061/40970(309)27 Sinha, T., & Cherkauer, K. A. (2008). Time Series Analysis of Soil Freeze and Thaw Processes in Indiana. JOURNAL OF HYDROMETEOROLOGY, 9(5), 936–950. https://doi.org/10.1175/2008jhm934.1 Aziz, T. N., Raiford, J. P., & Khan, A. A. (2008). NUMERICAL SIMULATION OF TURBULENT JETS. ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS, 2(2), 234–243. https://doi.org/10.1080/19942060.2008.11015224 Wang, C., Mueller, F., Engelmann, C., & Scott, S. L. (2008). Proactive process-level live migration in HPC environments. International Conference for High Performance Computing, Networking, Storage and Analysis, 126–137. https://doi.org/10.1109/sc.2008.5222634 Azmy, Y. Y., Gupta, A., & Pugh, F. (2008). Computational Modelling of Genome-Side Transcription Assembly Networks Using a Fluidics Analogy. PLOS ONE, 3(8). https://doi.org/10.1371/journal.pone.0003095 Seo, Y., & Kim, Y. R. (2008). Using Acoustic Emission to Monitor Fatigue Damage and Healing in Asphalt Concrete. KSCE JOURNAL OF CIVIL ENGINEERING, 12(4), 237–243. https://doi.org/10.1007/s12205-008-0237-3 Kim, Y. R., Baek, C., Underwood, B. S., Subramanian, V., Guddati, M. N., & Lee, K. (2008). Application of viscoelastic continuum damage model based finite element analysis to predict the fatigue performance of asphalt pavements. KSCE Journal of Civil Engineering, 12(2), 109–120. https://doi.org/10.1007/s12205-008-0109-x Muthadi, N. R., & Kim, Y. R. (2008). Local Calibration of Mechanistic-Empirical Pavement Design Guide for Flexible Pavement Design. TRANSPORTATION RESEARCH RECORD, (2087), 131–141. https://doi.org/10.3141/2087-14 Yang, Y., Sharma, R. R., Burns, J. C., & Cheng, J. J. (2008). Hydrolysis and fermentation of new switchgrass germplasm for bioethanol production. Proceedings of the ASABE Annual International Meeting (Providence, Rhode Island), 083799. Baek, J., & Hummer, J. E. (2008). Collision Models for Multilane Highway Segments to Examine Safety of Curbs. TRANSPORTATION RESEARCH RECORD, (2083), 128–136. https://doi.org/10.3141/2083-15 Keener, K. M., Ducoste, J. J., & Holt, L. M. (2008, December). Properties Influencing Fat, Oil, and Grease Deposit Formation. WATER ENVIRONMENT RESEARCH, Vol. 80, pp. 2241–2246. https://doi.org/10.2175/193864708X267441 Frey, H. C., Kuo, P.-Y., & Villa, C. (2008). Methodology for characterization of long-haul truck idling activity under real-world conditions. TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT, 13(8), 516–523. https://doi.org/10.1016/j.trd.2008.09.010 Khattak, A. J., Pan, X., Williams, B., Rouphail, N., & Fan, Y. (2008). Traveler Information Delivery Mechanisms Impact on Consumer Behavior. Transportation Research Record, (2069), 77–84. https://doi.org/10.3141/2069-10 Dowling, R., Flannery, A., Landis, B., Petritsch, T., Rouphail, N., & Ryus, P. (2008). Multimodal level of service for urban streets. Transportation Research Record, (2071), 1–7. Flannery, A., Rouphail, N., & Reinke, D. (2008). Analysis and modeling of automobile users' perceptions of quality of service on urban streets. Transportation Research Record, (2071), 26–34. Han, Y., & Stone, J. R. (2008). Synthesized through-trip models for small and medium urban areas. Transportation Research Record, (2077), 148–155. Ryu, S.-R., Chen, J., Noormets, A., Bresee, M. K., & Ollinger, S. V. (2008). Comparisons between PnET-Day and eddy covariance based gross ecosystem production in two Northern Wisconsin forests. AGRICULTURAL AND FOREST METEOROLOGY, 148(2), 247–256. https://doi.org/10.1016/j.agrformet.2007.08.005 Cunningham, C. M., Hummer, J. E., & Moon, J.-P. (2008). Analysis of Automated Speed Enforcement Cameras in Charlotte, North Carolina. TRANSPORTATION RESEARCH RECORD, (2078), 127–134. https://doi.org/10.3141/2078-17 Zhai, H., Frey, H. C., & Rouphail, N. M. (2008). A Vehicle-Specific Power Approach to Speed- and Facility-Specific Emissions Estimates for Diesel Transit Buses. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 42(21), 7985–7991. https://doi.org/10.1021/es800208d Hummer, J. E., & Maripalli, U. K. (2008). Laboratory test of driver responses to nine-panel logo signs. Transportation Research Record, (2056), 52–59. Grasso, B., Rasdorf, W., & Bridgers, M. (2008). Nature and extent of domestic construction program outsourcing. Journal of Construction Engineering and Management, 134(12), 1002–1010. https://doi.org/10.1061/(ASCE)0733-9364(2008)134:12(1002) Kruzic, A. P., & Liehr, S. K. (2008). [Review of Natural treatment and onsite systems]. Water Environment Research, 80(10), 1206–1224. Frey, H. C., Rouphail, N. M., & Zhai, H. (2008). Link-based emission factors for heavy-duty diesel trucks based on real-world data. Transportation Research Record, (2058), 23–32. https://doi.org/10.3141/2058-04 Oehlers, D. J., Haskett, M., Wu, C. Q., & Seracino, R. (2008). Embedding NSM FRP plates for improved IC debonding resistance. Journal of Composites for Construction, 12(6), 635–642. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:6(635) Horner, J. W., Stone, J. R., & Huntsinger, L. F. (2008). Data reuse methods for transportation planning in small- and medium-sized towns. Journal of Urban Planning and Development, 134(4), 149–152. https://doi.org/10.1061/(ASCE)0733-9488(2008)134:4(149) Frey, H. C., Rasdorf, W., Kim, K., Pang, G.-hao, & Lewis, P. (2008). Comparison of Real-World Emissions of B20 Biodiesel Versus Petroleum Diesel for Selected Nonroad Vehicles and Engine Tiers. TRANSPORTATION RESEARCH RECORD, (2058), 33–42. https://doi.org/10.3141/2058-05 Lacroix, A., Kim, Y. R., & Ranjithan, S. R. (2008). Backcalculation of Dynamic Modulus from Resilient Modulus of Asphalt Concrete with an Artificial Neural Network. TRANSPORTATION RESEARCH RECORD, (2057), 107–113. https://doi.org/10.3141/2057-13 Lowry, M. I., Bartelt-Hunt, S. L., Beaulieu, S. M., & Barlaz, M. A. (2008). Development of a coupled reactor model for prediction of organic contaminant fate in landfills. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 42(19), 7444–7451. https://doi.org/10.1021/es800907j Lou, I. C., & Reyes, F. L., III. (2008). Clarifying the roles of kinetics and diffusion in activated sludge filamentous bulking. BIOTECHNOLOGY AND BIOENGINEERING, 101(2), 327–336. https://doi.org/10.1002/bit.21886 Choi, W., Rizkalla, S., Zia, P., & Mirmiran, A. (2008). Behavior and design of high-strength prestressed concrete girders. PCI JOURNAL, 53(5), 54–69. https://doi.org/10.15554/pcij.09012008.54.69 Lee, J. S., & Kim, Y. R. (2008). Understanding the effects of aggregate and emulsion application rates on performance of asphalt surface treatments. TRANSPORTATION RESEARCH RECORD, (2044), 71–78. https://doi.org/10.3141/2044-08 Devineni, N., Sankarasubramanian, A., & Ghosh, S. (2008). Multimodel ensembles of streamflow forecasts: Role of predictor state in developing optimal combinations. Water Resources Research, 44(9). https://doi.org/10.1029/2006wr005855 Frey, H. C., Kim, K., Pang, S.-H., Rasdorf, W. J., & Lewis, P. (2008). Characterization of Real-World Activity, Fuel Use, and Emissions for Selected Motor Graders Fueled with Petroleum Diesel and B20 Biodiesel. JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION, 58(10), 1274–1287. https://doi.org/10.3155/1047-3289.58.10.1274 Jia, T., & Duel-Hallen, A. (2008). Performance of improved channel allocation for multicarrier CDMA with adaptive frequency hopping and multiuser detection. 2008 IEEE INTERNATIONAL CONFERENCE ON COMMUNICATIONS, PROCEEDINGS, VOLS 1-13, pp. 4780–4784. https://doi.org/10.1109/icc.2008.896 Hassan, T., Taleb, L., & Krishna, S. (2008). Influence of non-proportional loading on ratcheting responses and simulations by two recent cyclic plasticity models. INTERNATIONAL JOURNAL OF PLASTICITY, 24(10), 1863–1889. https://doi.org/10.1016/j.ijplas.2008.04.008 Rahman, S. M., Hassan, T., & Corona, E. (2008). Evaluation of cyclic plasticity models in ratcheting simulation of straight pipes under cyclic bending and steady internal pressure. INTERNATIONAL JOURNAL OF PLASTICITY, 24(10), 1756–1791. https://doi.org/10.1016/j.ijplas.2008.02.010 Abolhasani, S., Frey, H. C., Kim, K., Rasdorf, W., Lewis, P., & Pang, S.-H. (2008). Real-world in-use activity, fuel use, and emissions for nonroad construction vehicles: A case study for excavators. JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION, 58(8), 1033–1046. https://doi.org/10.3155/1047-3289.58.8.1033 Mast, R. F., Dawood, M., Rizkalla, S. H., & Zia, P. (2008). Flexural strength design of concrete beams reinforced with high-strength steel bars. ACI Structural Journal, 105(5), 570–577. Mertol, H. C., Rizkalla, S., Zia, P., & Mirmiran, A. (2008). Characteristics of compressive stress distribution in high-strength concrete. ACI Structural Journal, 105(5), 626–633. Montejo, L. A., Sloan, J. E., Kowalsky, M. J., & Hassan, T. (2008). Cyclic response of reinforced concrete members at low temperatures. Journal of Cold Regions Engineering, 22(3), 79–102. https://doi.org/10.1061/(ASCE)0887-381X(2008)22:3(79) Kim, Y. R., Lee, S. J., Se, Y., & El-Haggan, O. (2008). Determination of price reduction factors for density-deficient asphalt pavements. Journal of Testing and Evaluation, 36(4), 335–344. https://doi.org/10.1520/jte101460 Schroeder, B. J., Rouphail, N. M., & Hughes, R. G. (2008). Toward roundabout accessibility - Exploring the operational impact of pedestrian signalization options at modern roundabouts. Journal of Transportation Engineering, 134(6), 262–271. https://doi.org/10.1061/(ASCE)0733-947X(2008)134:6(262) Sharmin, N., Kunberger, T., Gabr, M. A., Quaranta, J. D., & Bowders, J. J. (2008). Performance modeling and optimization of contaminant extraction using prefabricated vertical wells (PVWs). GEOSYNTHETICS INTERNATIONAL, 15(3), 205–215. https://doi.org/10.1680/gein.2008.15.3.205 Ali, M. S. M., Oehlers, D. J., Griffith, M. C., & Seracino, R. (2008). Interfacial stress transfer of near surface-mounted FRP-to-concrete joints. ENGINEERING STRUCTURES, 30(7), 1861–1868. https://doi.org/10.1016/j.engstruct.2007.12.006 Oehlers, D. J., Rashid, R., & Seracino, R. (2008). IC debonding resistance of groups of FRP NSM strips in reinforced concrete beams. CONSTRUCTION AND BUILDING MATERIALS, 22(7), 1574–1582. https://doi.org/10.1016/j.conbuildmat.2007.03.021 Kripakaran, P., Gupta, A., & Matzen, V. C. (2008). Computational framework for remotely operable laboratories. ENGINEERING WITH COMPUTERS, 24(4), 405–415. https://doi.org/10.1007/s00366-008-0089-y Richards, B., & Ducoste, J. (2008). Application of non-biological surrogates for analysis of sequential disinfection continuous flow systems. JOURNAL OF WATER SUPPLY RESEARCH AND TECHNOLOGY-AQUA, 57(4), 225–238. https://doi.org/10.2166/aqua.2008.042 Ulker, M. B. C., Rahman, M. S., Zhen, R., & Mirmiran, A. (2008). Traffic barriers under vehicular impact: From computer simulation to design guidelines. COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, 23(6), 465–480. https://doi.org/10.1111/j.1467-8667.2008.00552.x Valdes, J. R., & Evans, T. M. (2008). Sand-rubber mixtures: Experiments and numerical simulations. CANADIAN GEOTECHNICAL JOURNAL, 45(4), 588–595. https://doi.org/10.1139/T08-002 Reis, E. M., & Rizkalla, S. H. (2008). Material characteristics of 3-D FRP sandwich panels. CONSTRUCTION AND BUILDING MATERIALS, 22(6), 1009–1018. https://doi.org/10.1016/j.conbuildmat.2007.03.023 Rossner, A., & Knappe, D. R. U. (2008). MTBE adsorption on alternative adsorbents and packed bed adsorber performance. WATER RESEARCH, 42(8-9), 2287–2299. https://doi.org/10.1016/j.watres.2007.12.009 Havner, K. S. (2008). Further investigation of crystal hardening inequalities in (110) channel die compression. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 464(2096), 1955–1982. https://doi.org/10.1098/rspa.2007.0272 Xu, Q., & Rahman, M. S. (2008). Finite element analyses of layered visco-elastic system under vertical circular loading. INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 32(8), 897–913. https://doi.org/10.1002/nag.650 Kiesel, S., Peters, K., Hassan, T., & Kowalsky, M. (2008). Large deformation in-fiber polymer optical fiber sensor. IEEE PHOTONICS TECHNOLOGY LETTERS, 20(5-8), 416–418. https://doi.org/10.1109/LPT.2008.916929 Montejo, L. A., & Kowalsky, M. J. (2008, May). Estimation of frequency-dependent strong motion duration via wavelets and its influence on nonlinear seismic response. COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, Vol. 23, pp. 253–264. https://doi.org/10.1111/j.1467-8667.2007.00534.x Hassan, T. K., Seliem, H. M., Dwairi, H., Rizkalla, S. H., & Zia, P. (2008). Shear behavior of large concrete beams reinforced with high-strength steel. ACI Structural Journal, 105(2), 173–179. Benaroya, H., & Bemold, L. (2008). [Review of Engineering of lunar bases]. ACTA ASTRONAUTICA, 62(4-5), 277–299. https://doi.org/10.1016/j.actaastro.2007.05.001 Bernold, L. E. (2008). Discussion of "Developing a Resource Supply Chain Planning System for Construction Projects" by H. Ping Tserng, Samuel V. L. Yin, and Sherman Li. Journal of Construction Engineering and Management, 134(5), 382–384. Sankarasubramanian, A., Lall, U., & Espinueva, S. (2008). Role of retrospective forecasts of GCMs forced with persisted SST anomalies in operational streamflow forecasts development. JOURNAL OF HYDROMETEOROLOGY, 9(2), 212–227. https://doi.org/10.1175/2007JHM842.1 Frey, H. C., Rasdorf, W., Kim, K., Pang, S.-H., Lewis, P., & Abolhassani, S. (2008). Real-world duty cycles and utilization for construction equipment in North Carolina. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation. Ma, Y.-S., Chang, C.-N., Chiang, Y.-P., Sung, H.-F., & Chao, A. C. (2008). Photocatalytic degradation of lignin using Pt/TiO2 as the catalyst. CHEMOSPHERE, 71(5), 998–1004. https://doi.org/10.1016/j.chemosphere.2007.10.061 Harris, E., Rasdorf, W., & Hummer, J. E. (2008). New standards, new signs: Determining sign performance under controlled conditions. IMSA Journal, 46(1), 44–55. Rosenboom, O., & Rizkalla, S. (2008). Modeling of IC debonding of FRP-strengthened concrete flexural members. Journal of Composites for Construction, 12(2), 168–179. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:2(168) Rashid, R., Oehlers, D. J., & Seracino, R. (2008). IC debonding of FRP NSM and EB retrofitted concrete: Plate and cover interaction tests. Journal of Composites for Construction, 12(2), 160–167. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:2(160) Frey, H. C., Zhang, K., & Rouphail, N. M. (2008). Fuel use and emissions comparisons for alternative routes, time of day, road grade, and vehicles based on in-use measurements. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 42(7), 2483–2489. https://doi.org/10.1021/es702493v Bernold, L. E. (2008). Applying total-quality-management principles to improving engineering education. Journal of Professional Issues in Engineering Education and Practice, 134(1), 33–40. https://doi.org/10.1061/(ASCE)1052-3928(2008)134:1(33) Lee, J., & Bernold, L. E. (2008). Ubiquitous agent-based communication in construction. Journal of Computing in Civil Engineering, 22(1), 31–39. https://doi.org/10.1061/(ASCE)0887-380](2008)22:1(31) Adeli, H., & Rasdorf, W. (2008). On professional standards of publication in peer-reviewed research journals. Journal of Computing in Civil Engineering, 22(1), 1–2. https://doi.org/10.1061/(asce)0887-3801(2008)22:1(1) Cai, H., & Rasdorf, W. (2008). Modeling road centerlines and predicting lengths in 3-D using LIDAR point cloud and planimetric road centerline data. COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, 23(3), 157–173. https://doi.org/10.1111/j.1467-8667.2008.00518.x Kim, K.-T., & Elernold, L. E. (2008). A comparison of two innovative technologies for safe pipe installation - "Pipeman" and the Stewart-Gough platform-based pipe manipulator. AUTOMATION IN CONSTRUCTION, 17(3), 322–332. https://doi.org/10.1016/j.autcon.2007.04.004 Havner, K. S. (2008). Investigation of basic crystal hardening inequalities in a range of stable lattice orientations in (110) channel die compression. INTERNATIONAL JOURNAL OF PLASTICITY, 24(1), 74–88. https://doi.org/10.1016/j.ijplas.2007.02.002 Zhang, K., & Frey, C. (2008). Evaluation of response time of a portable system for in-use vehicle tailpipe emissions measurement. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 42(1), 221–227. https://doi.org/10.1021/es062999h Dilek, U., & Leming, M. L. (2008). Elastic dynamic young's modulus and permeability of concrete in fire damaged structural members. Journal of Materials in Civil Engineering, 20(2), 102–110. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:2(102) Kiattikomol, V., Chatterjee, A., Hummer, J. E., & Younger, M. S. (2008). Planning level regression models for prediction of crashes on interchange and noninterchange segments of urban freeways. Journal of Transportation Engineering, 134(3), 111–117. https://doi.org/10.1061/(ASCE)0733-947X(2008)134:3(111) Schnerch, D., & Rizkalla, S. (2008). Flexural strengthening of steel bridges with high modulus CFRP strips. Journal of Bridge Engineering (ASCE), 13(2), 192–201. https://doi.org/10.1061/(ASCE)1084-0702(2008)13:2(192) Bartelt-Hunt, S. L., Knappe, D. R. U., & Barlaz, M. A. (2008). A Review of Chemical Warfare Agent Simulants for the Study of Environmental Behavior. Critical Reviews in Environmental Science and Technology, 38(2), 112–136. https://doi.org/10.1080/10643380701643650 Hassan, T. K., Vickery, J. D., & Rizkalla, S. H. (2008). Properties of adhesives and CPVC materials proposed for steel tank lining. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 28(1-2), 77–90. https://doi.org/10.1016/j.ijadhadh.2007.05.002 Rosenboom, O., & Rizkalla, S. (2008). Experimental Study of Intermediate Crack Debonding in Fiber-Reinforced Polymer Strengthened Beams. ACI Structural Journal, 105(1), 41–50. https://doi.org/10.14359/19067 Rizkalla, S., Dawood, M., & Schnerch, D. (2008). Development of a carbon fiber reinforced polymer system for strengthening steel structures. Composites Part A: Applied Science and Manufacturing, 39(2), 388–397. https://doi.org/10.1016/j.compositesa.2007.10.009 Seliem, H. M., Lucier, G., Rizkalla, S. H., & Zia, P. (2008). Behavior of concrete bridge decks reinforced with high-performance steel. ACI Structural Journal, 105(1), 78–86. https://doi.org/10.14359/19071