Civil, Construction and Environmental Engineering - 2016 Delavarrafiee, M., & Frey, H. C. (2016). Procedure for real-world measurement and data analysis of a flex fuel vehicle operated on E85. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 4, 2689–2714. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85014816584&partnerID=MN8TOARS Singh, S., & Frey, H. C. (2016). Gasoline vehicle fuel efficiency and emissions for gas-direct injection versus port-fuel injection. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 4, 2823–2844. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85014864810&partnerID=MN8TOARS Rastogi, N., & Frey, H. C. (2016). Assessing the impact of real-world driving cycles, fuel economy and tailpipe exhaust emissions on eco-rating of passenger cars. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 4, 2758–2783. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85014833745&partnerID=MN8TOARS Rice, J., Wutich, A., White, D. D., & Westerhoff, P. (2016). Comparing actual de facto wastewater reuse and its public acceptability: A three city case study. Sustainable Cities and Society, 27, 467–474. https://doi.org/10.1016/j.scs.2016.06.007 Ahsanuzzaman, M., & Gabr, M. A. (2016). Proposed Anchoring Systems for Gulf Stream (Gs) Renewable Energy Devices Accounting for Potential of GS Meandering. 3rd Marine Energy Technical Symposium, National Hydropower Association. Presented at the 3rd Marine Energy Technical Symposium, National Hydropower Association, Washington, DC. Gabr, M., Butler, C., Rasdorf, W., Findley, D. J., & Bert, S. A. (2016). Highway Retaining Walls are Assets: A Risk-Based Approach for Managing Them. GEOSTRATA Magazine, 20(2), 66–72. https://doi.org/10.1061/geosek.0000320 Mousavi, S. H., Gabr, M. A., & Borden, R. H. (2016). Correlation of dynamic cone penetrometer index to proof roller test to assess subgrade soils stabilization criterion. International Journal of Geotechnical Engineering, 12(3), 284–292. https://doi.org/10.1080/19386362.2016.1272751 Chmielewski, H., Guidotti, R., McAllister, T., & Gardoni, P. (2016). Response of Water Systems under Extreme Events: A Comprehensive Approach to Modeling Water System Resilience. World Environmental and Water Resources Congress 2016. Presented at the World Environmental and Water Resources Congress 2016. https://doi.org/10.1061/9780784479865.050 Guidotti, R., Chmielewski, H., Unnikrishnan, V., Gardoni, P., McAllister, T., & van de Lindt, J. (2016). Modeling the resilience of critical infrastructure: the role of network dependencies. Sustainable and Resilient Infrastructure, 1(3-4), 153–168. https://doi.org/10.1080/23789689.2016.1254999 Collins, M. P., Bentz, E. C., Quach, P. T., & Proestos, G. T. (2016). Predicting the Shear Strength of Thick Slabs. fib International Workshop on Beam Shear, 269–282. Saha, P. K., Khlystov, A., Yahya, K., Zhang, Y., Xu, L., Ng, N. L., & Grieshop, A. P. (2016, August 9). Supplementary material to "Quantifying the volatility of organic aerosol in the southeastern U.S." (Vol. 8). Vol. 8. https://doi.org/10.5194/acp-2016-575-supplement Saha, P. K., Khlystov, A., Yahya, K., Zhang, Y., Xu, L., Ng, N. L., & Grieshop, A. P. (2016, August 9). Quantifying the volatility of organic aerosol in the southeastern U.S. (Vol. 8). Vol. 8. https://doi.org/10.5194/acp-2016-575 Zhi, Y., & Liu, J. (2016). Surface modification of activated carbon for enhanced adsorption of perfluoroalkyl acids from aqueous solutions. Chemosphere, 144, 1224–1232. https://doi.org/10.1016/j.chemosphere.2015.09.097 Karam, A., de los Reyes, F. L., III, Levis, J., Ranjithan, R., & Ducoste, J. (2016, June 26). Photochemical Micro-sensors for Evaluating Light Distribution within Photosyntheitic Biioreactors for Biofuels Production. Presented at the 6th International Conference on Algal Biomass and Bioproducts, San Diego, CA. Matthiadis, A., Koryachko, A., Muhammad, D., Foret, J., Brady, S. M., Ducoste, J., … Long, T. A. (2016, July). Computational prediction of regulatory relationships: New players in the Arabidopsis thaliana iron deficiency response. Presented at the Salt & Minerals Symposium, American Society of Plant Biology (ASPB) Annual Meeting, Austin, TX. Williams, C., Koryachko, A., Matthiadis, A., Muhammad, D., Foret, J., Brady, S. M., … Long, T. A. (2016, March). Clustering and Differential Alignment Algorithm: Identification of Early Stage Regulators in the A. thaliana Iron Deficiency Response. Presented at the Pittcon Conference, Atlanta, GA. Malyala, D., Hao, Z., & Ducoste, J. (2016, November 13). Determining the fate of Long Chain Free Fatty Acids and Fats, Oils and Grease in Sewer Collection Systems using a double waveband FTIR technique. Presented at the North Carolina Section of the American Water Works Association (NCAWWA)-Water Environment Association (WEA), Raleigh, NC. Hao, Z., Sun, M., Ducoste, J., Barlaz, M., Benson, C., Castaldi, M., & Luettich, S. (2016, January). Understanding and Predicting Temperatures in Municipal Solid Waste Landfills. Presented at the Global Waste Management Symposium, Indian Wells, CA. Hao, Z., Malyala, D., & Ducoste, J. (2016, November 13). Determination of Long Chain Free Fatty Acid (LCFFA) in Wastewater Using a Novel Double Wavenumber FTIR Technique for the Protection of Sanitary Sewer Collection Systems. Presented at the North Carolina Section of the American Water Works Association (NCAWWA)-Water Environment Association (WEA), Raleigh, NC. de los Reyes, F. L., III, Wang, L., Shen, P., Yeh, J., Aziz, T., & Ducoste, J. J. (2016, March). Directing microbial community assembly in anaerobic reactors: implications for increasing methane yields and improving start-up. Presented at the Water Resources Research Institute (WRRI) Conference, Raleigh, NC. Weaver, J. E., Ducoste, J. J., & de los Reyes, F. L. (2016, November 13). Inducing Aerobic Granular Sludge Formation Through Unevenly Distributed Hydrodynamic Shear Rates. Presented at the North Carolina Section of the American Water Works Association (NCAWWA)-Water Environment Association (WEA), Raleigh, NC. Ducoste, J. J. (2016). Drinking Water Treatment: What Happens from Source to Tap. Presented at the Durham Technical Community College, Durham, NC. Ducoste, J. J. (2016). Game Changer: A New Technique for Measuring the Performance of Grease Interceptors. Presented at the Water Environment Association of Texas (WEAT) Capacity, Management, Operation & Maintenance (CMOM) Conference, Austin, TX. Ducoste, J. J. (2016). Grease Removal Devices: Challenges in the Removal of FOG Emulsions and the Impact of Food Service Establishment Operations. Presented at the 32nd Annual Onsite Water Protection Conference, Raleigh, NC. Cao, W., Norouzi, A., & Kim, Y. R. (2016). Application of viscoelastic continuum damage approach to predict fatigue performance of Binzhou perpetual pavements. Journal of Traffic and Transportation Engineering (English Edition), 3(2), 104–115. https://doi.org/10.1016/J.JTTE.2016.03.002 Botros, A., Lucier, G., Rizkalla, S., & Gleich, H. (2016). Behavior of Free and Connected Double-Tee Flanges Reinforced with carbon-fiber-reinforced polymer. PCI Journal. Seliem, H., Ding, L., Potter, W., & Rizkalla, S. (2016). Use of carbon-fiber-reinforced polymer grid for precast concrete piles. PCI Journal. Shapack, G., Van Brunt, Z., Seracino, R., Lucier, G., Rizkalla, S., & Pour-Ghaz, M. (2016). Improving the Durability and Coastal Bridges with CFRP Prestressed Cored Slabs. ACI Special Publications. Sciaudone, E. J., Velasquez-Montoya, L., Smyre, E. A., & Overton, M. F. (2016). Spatial and temporal variability in dune field: Pea Island, North Carolina. Shore & Beach, Coastal Observations, 84(2), 49–58. Chowdhury, Z., Porter, K. L., Collins, J., Francis, C., Sriboonlue, S., Cornwell, D., … Knappe, D. R. U. (2016). Survey of Existing VOC Treatment Installations (Executive Summary No. 4453). Denver, Colorado: Water Research Foundation. De la Cruz, F. B., Green, R. B., Hater, G. R., Chanton, J. P., Thoma, E. D., Harvey, T. A., & Barlaz, M. A. (2016). How Much Methane is Emitted from Landfills? A Comparison of Field Measurements to Gas Production Models. Presented at the Global Waste Management Symposium, Indian Wells, CA. Levis, J. W., DeCarolis, J. F., & Barlaz, M. A. (2016). Proactive Development/Evaluation of Solid Waste Management Strategies in Response to Future Electricity, Fuel & Transportation. Presented at the Global Waste Management Symposium, Indian Wells, CA. Yazdani, R., & Barlaz, M. A. (2016). Methane Enhancement by Anaerobic Composting of Food Waste and FOG. Presented at the Global Waste Management Symposium, Indian Wells, CA. Levis, J. W., Hodge, K. L., DeCarolis, J. F., & Barlaz, M. A. (2016). Systematic Evaluation of Industrial, Commercial, and Institutional Food Waste Management Strategies in the U.S. Presented at the Global Waste Management Symposium, Indian Wells, CA. Hao, Z., Sun, M., Ducoste, J., Luettich, S., Castaldi, M., Benson, C. H., & Barlaz, M. A. (2016). Understanding and Predicting Temperatures in Municipal Solid Waste Landfills. Presented at the Global Waste Management Symposium, Indian Wells, CA. Levis, J. W., & Barlaz, M. A. (2016). The Application of Life-Cycle Assessment to Solid Waste Management: Applications, Challenges and Modeling Techniques. Presented at the Life Cycle Assessment and Other Assessment Tools for Waste Management and Resource Optimization, Cetraro, Calabria, Italy. Barlaz, M. (2016). Workshop on The Responsible Disposal of Flame Retarded Foams and Plastics. Presented at the Solid Waste Management in the U.S, University of California-Berkeley. Levis, J. W., DeCArolis, J. D., Ranjithan, S. R., & Barlaz, M. A. (2016). Integrated Solid Waste Management and Its Environmental Sustainability in a Carbon Constrained Environment. Retrieved from Environmental Research and Education Foundation website: https://erefdn.org/integrated-solid-waste-management-and-its-environmental-sustainability-in-a-carbon-constrained-environment/ Sun, W., Wang, X., DeCarolis, J. F., & Barlaz, M. A. (2016). Modernizing Methane Generation Models and Characterizing the Uncertainty from Select U.S. Landfills. Presented at the Global Waste Management Symposium, Indian Wells, CA. Arumugam, S. (2016, February). Climate Variability and its Impacts over the Southeast. Presented at the Columbia University, New York. Arumugam, S. (2016, March). Water and ecological sustainability under near-term climate change. Presented at the Water Sustainability and Climate (WSC) PI meeting, National Science Foundation. Das, P., & Arumugam, S. (2016, May 22). Predictive Classical and Hierarchical Bayesian Modeling for Yearly Irrigation Water Withdrawal over the Coterminous USA. Presented at the World Environmental and Water Resources Congress (EWRI), West Palm Beach, FL. Mazrooei, A., & Arumugam, S. (2016, May 22). Developing Categorical Streamflow Forecasts from Climate Forecasts Using Probabilistic Downscaling Methods. Presented at the World Environmental and Water Resources Congress (EWRI), West Palm Beach, FL. Libera, D., & Arumugam, S. (2016, May 22). Multivariate Bias Correction Procedures for Improving Water Quality Predictions using Mechanistic Models. Presented at the World Environmental and Water Resources Congress (EWRI), West Palm Beach, FL. Arumugam, S., Ruhi, A., Sabo, J., Sinha, T., Seo, S. B., & Bhowmik, R. D. (2016, December 12). Synthesis of US Public Water Supply: Spatio-temporal Patterns and Socio-Economic Controls. Presented at the American Geophysical Union Fall meeting, San Francisco, CA. Seo, S. B., Mahinthakumar, G., Arumugam, S., & Kumar, M. (2016, May 22). Understanding the Effects of Groundwater Pumping on Streamflow: Human-Feedback Analysis on Downstream Impacts and Relevance to Reservoir Management. Presented at the World Environmental & Water Resources Congress (EWRI), West Palm Beach, Florida. Bhowmik, R. D., & Arumugam, S. (2016, May 22). Importance of Preserving Cross-correlation in developing Statistically Downscaled Climate Forcings. Presented at the World Environmental & Water Resources Congress (EWRI), West Palm Beach, FL. Arumugam, S., Quieroz, A., Patskoski, J., Mahinthakumar, G., & DeCarolis, J. (2016, December 12). Utilizing Climate Forecasts for Improving Water and Power Systems Coordination. Presented at the American Geophysical Union Fall meeting, San Francisco, CA. Abbasian-Hosseini, S. A., Howell, G., & Liu, M. (2016, May 24). Relationship between On-Site Planning Efforts and Work Plan Reliability. Presented at the Construction Research Congress 2016, San Juan, Puerto Rico. https://doi.org/10.1061/9780784479827.212 Xu, Z., Jiang, J., Wang, X., Han, K., Ameen, A., Khan, I., … Liu, G. L. (2016). Large-area, uniform and low-cost dual-mode plasmonic naked-eye colorimetry and SERS sensor with handheld Raman spectrometer. Nanoscale, 8(11), 6162–6172. https://doi.org/10.1039/C5NR08357E Islam, M. R., Hadiuzzaman, M., Banik, R., Hasnat, M. M., Musabbir, S. R., & Hossain, S. (2016). Bus service quality prediction and attribute ranking: a neural network approach. Public Transport, 8(2), 295–313. Knappe, D. R. U., Ingham, R. S., Moreno-Barbosa, J., Sun, M., Summers, R. S., & Dougherty, T. (2016). Evaluation of Henry’s Law Constants and Freundlich Adsorption Constants for VOCs (Executive Summary No. 4462). Denver, Colorado: Water Research Foundation. Elwardany, M. D., Yousefi Rad, F., Castorena, C., & Kim, Y. R. (2016). Evaluation of asphalt mixture laboratory long-term ageing methods for performance testing and prediction. Road Materials and Pavement Design, 18(sup1), 28–61. https://doi.org/10.1080/14680629.2016.1266740 Kong, D., List, G. F., Guo, X., & Wu, D. (2016). Modeling vehicle car-following behavior in congested traffic conditions based on different vehicle combinations. Transportation Letters, 10(5), 280–293. https://doi.org/10.1080/19427867.2016.1262979 Hale, D., Hajbabaie, A., Ma, J., Hu, J., Park, H., & Bared, J. (2016). Proposed Data-Driven Performance Measures for Comparing and Ranking Traffic Bottlenecks. Transportation Research Procedia, 15, 483–494. https://doi.org/10.1016/j.trpro.2016.06.041 Ortiz, A. C., & Ashton, A. D. (2016). Exploring shoreface dynamics and a mechanistic explanation for a morphodynamic depth of closure. Journal of Geophysical Research: Earth Surface, 121(2), 442–464. https://doi.org/10.1002/2015JF003699 Siegert, M., Yates, M. D., Call, D. F., Zhu, X., Spormann, A., & Logan, B. E. (2016). Correction to Comparison of Nonprecious Metal Cathode Materials for Methane Production by Electromethanogenesis. ACS Sustainable Chemistry & Engineering, 4(9), 5088–5088. https://doi.org/10.1021/ACSSUSCHEMENG.6B01763 Zamani, A., & Montoya, B. M. (2016). Permeability Reduction Due to Microbial Induced Calcite Precipitation in Sand. Geo-Chicago 2016. Presented at the Geo-Chicago 2016. https://doi.org/10.1061/9780784480120.011 Khoubani, A., Evans, T. M., & Montoya, B. M. (2016). Particulate Simulations of Triaxial Tests on Bio-Cemented Sand Using a New Cementation Model. Geo-Chicago 2016. Presented at the Geo-Chicago 2016. https://doi.org/10.1061/9780784480120.010 Shanahan, C., & Montoya, B. M. (2016). Erosion Reduction of Coastal Sands Using Microbial Induced Calcite Precipitation. Geo-Chicago 2016. Presented at the Geo-Chicago 2016. https://doi.org/10.1061/9780784480120.006 De la Cruz, F. B., Osborne, J., & Barlaz, M. A. (2016). Determination of Sources of Organic Matter in Solid Waste by Analysis of Phenolic Copper Oxide Oxidation Products of Lignin. Journal of Environmental Engineering, 142(2), 04015076. https://doi.org/10.1061/(ASCE)EE.1943-7870.0001038 Sun, M., Sun, W., & Barlaz, M. A. (2016). A batch assay to measure microbial hydrogen sulfide production from sulfur-containing solid wastes. Science of The Total Environment, 551-552, 23–31. https://doi.org/10.1016/J.SCITOTENV.2016.01.161 Lopez, V. M., De la Cruz, F. B., & Barlaz, M. A. (2016). Chemical composition and methane potential of commercial food wastes. Waste Management, 56, 477–490. https://doi.org/10.1016/j.wasman.2016.07.024 Underwood, B. S. (2016). A continuum damage model for asphalt cement and asphalt mastic fatigue. International Journal of Fatigue, 82, 387–401. https://doi.org/10.1016/j.ijfatigue.2015.08.020 Proestos, G., Bae, G.-M., Cho, J.-Y., Bentz, E. C., & Collins, M. P. (2016). Influence of High-Strength Bars on Shear Response of Containment Walls. ACI Structural Journal, 113(5), 917–927. https://doi.org/10.14359/51688750 Proestos, G. T., Bentz, E. C., & Collins, M. P. (2016). The design and analysis of reinforced concrete shell elements subjected to in-plane and out-of-plane shear stresses. Proceedings of the 11th fib International PhD Symposium in Civil Engineering, FIB 2016, 695–702. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84991738344&partnerID=MN8TOARS Brunhaver, S., Matusovich, H. M., Streveler, R. A., Sheppard, S., Carrico, C., & Harris, A. (2016). Understanding engineering students' professional pathways: a longitudinal mixed-methods study. 123rd ASEE Annual Conference and Exposition. Presented at the American Society for Engineering Education. Boehm, A. B., Wang, D., Ercumen, A., Shea, M., Harris, A. R., Shanks, O. C., … others. (2016). Occurrence of host-associated fecal markers on child hands, household soil, and drinking water in rural Bangladeshi households. Environmental Science & Technology Letters, 3(11), 393–398. Harris, A. R., Pickering, A. J., Harris, M., Doza, S., Islam, M. S., Unicomb, L., … Boehm, A. B. (2016). Ruminants contribute fecal contamination to the urban household environment in Dhaka, Bangladesh. Environmental Science & Technology, 50(9), 4642–4649. Carrico, C., Harris, A., Matusovich, H. M., Brunhaver, S., Streveler, R. A., & Sheppard, S. (2016). Helping engineering students get jobs: Views from career services professionals. 123rd ASEE Annual Conference and Exposition. Presented at the American Society for Engineering Education. Thompson, K. A., Shimabuku, K. K., Kearns, J. P., Knappe, D. R. U., & Summers, R. S. (2016). Biochar sorbents for sulfamethoxazole removal from surface water, stormwater, and wastewater effluent. Water Research, 50, 11253–11262. https://doi.org/10.1016/j.watres.2016.03.049 Gundla, A., Medina, J., Gudipudi, P., Stevens, R., Salim, R., Zeiada, W., & Shane Underwood, B. (2016). Investigation of Aging in Hydrated Lime and Portland Cement Modified Asphalt Concrete at Multiple Length Scales. Journal of Materials in Civil Engineering, 28(5), 04015205. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001501 Mogawer, W. S., Austerman, A. J., & Underwood, S. (2016). Effect of Binder Modification on the Performance of an Ultra-Thin Overlay Pavement Preservation Strategy. Transportation Research Record: Journal of the Transportation Research Board, 2550(1), 1–7. https://doi.org/10.3141/2550-01 Zeiada, W. A., Kaloush, K. E., Underwood, B. S., & Mamlouk, M. (2016). Development of a Test Protocol to Measure Uniaxial Fatigue Damage and Healing. Transportation Research Record: Journal of the Transportation Research Board, 2576(1), 10–18. https://doi.org/10.3141/2576-02 Mensching, D. J., Rahbar-Rastegar, R., Underwood, B. S., & Daniel, J. S. (2016). Identifying Indicators for Fatigue Cracking in Hot-Mix Asphalt Pavements Using Viscoelastic Continuum Damage Principles. Transportation Research Record: Journal of the Transportation Research Board, 2576(1), 28–39. https://doi.org/10.3141/2576-04 Yang, S., Braham, A., Underwood, S., Hanz, A., & Reinke, G. (2016). Correlating field performance to laboratory dynamic modulus from indirect tension and torsion bar. Road Materials and Pavement Design, 18(sup1), 104–127. https://doi.org/10.1080/14680629.2016.1267438 Gudipudi, P. P., & Underwood, B. S. (2016). Development of Modulus and Fatigue Test Protocol for Fine Aggregate Matrix for Axial Direction of Loading. Journal of Testing and Evaluation, 45(2), 20150295. https://doi.org/10.1520/JTE20150295 Ham, Y., Han, K. K., Lin, J. J., & Golparvar-Fard, M. (2016). Visual monitoring of civil infrastructure systems via camera-equipped Unmanned Aerial Vehicles (UAVs): a review of related works. Visualization in Engineering, 4(1). https://doi.org/10.1186/s40327-015-0029-z Jaunich, M. K., Levis, J. W., Barlaz, M. A., & DeCarolis, J. F. (2016). Lifecycle Process Model for Municipal Solid Waste Collection. Journal of Environmental Engineering, 142(8), 04016037. https://doi.org/10.1061/(asce)ee.1943-7870.0001065 Ryan, N. A., Johnson, J. X., & Keoleian, G. A. (2016). Comparative Assessment of Models and Methods To Calculate Grid Electricity Emissions. Environmental Science & Technology, 50(17), 8937–8953. https://doi.org/10.1021/acs.est.5b05216 Lin, Y., Johnson, J. X., & Mathieu, J. L. (2016). Emissions impacts of using energy storage for power system reserves. Applied Energy, 168, 444–456. https://doi.org/10.1016/j.apenergy.2016.01.061 Good, J., & Johnson, J. X. (2016). Impact of inverter loading ratio on solar photovoltaic system performance. Applied Energy, 177, 475–486. https://doi.org/10.1016/j.apenergy.2016.05.134 Chiang, A. C., Moore, M. R., Johnson, J. X., & Keoleian, G. A. (2016). Emissions reduction benefits of siting an offshore wind farm: A temporal and spatial analysis of Lake Michigan. Ecological Economics, 130, 263–276. https://doi.org/10.1016/j.ecolecon.2016.07.010 Barker, Z. A., Stillwell, A. S., & Berglund, E. Z. (2016). Scenario Analysis of Energy and Water Trade-Offs in the Expansion of a Dual Water System. Journal of Water Resources Planning and Management, 142(12), 05016012. https://doi.org/10.1061/(asce)wr.1943-5452.0000714 Zeiada, W. A., Underwood, B. S., & Kaloush, K. E. (2016). Impact of asphalt concrete fatigue endurance limit definition on pavement performance prediction. International Journal of Pavement Engineering, 18(11), 945–956. https://doi.org/10.1080/10298436.2015.1127372 Nobakht, M., Sakhaeifar, M. S., Newcomb, D., & Underwood, S. (2016). Mechanistic-empirical methodology for the selection of cost-effective rehabilitation strategy for flexible pavements. International Journal of Pavement Engineering, 19(8), 675–684. https://doi.org/10.1080/10298436.2016.1199878 Harris, A. R., Pickering, A. J., Harris, M., Doza, S., Islam, M. S., Unicomb, L., … Boehm, A. B. (2016). Ruminants Contribute Fecal Contamination to the Urban Household Environment in Dhaka, Bangladesh. Environmental Science & Technology, 50(9), 4642–4649. https://doi.org/10.1021/acs.est.5b06282 Boehm, A. B., Wang, D., Ercumen, A., Shea, M., Harris, A. R., Shanks, O. C., … Pickering, A. J. (2016). Occurrence of Host-Associated Fecal Markers on Child Hands, Household Soil, and Drinking Water in Rural Bangladeshi Households. Environmental Science & Technology Letters, 3(11), 393–398. https://doi.org/10.1021/acs.estlett.6b00382 Weaver, J. E., Ducoste, J. J., & Reyes, F. L. (2016). Fluid shear variation potentially plays a role in aerobic granular sludge formation. WEFTEC 2016 - 89th Water Environment Federation Annual Technical Exhibition and Conference, 3, 5737–5744. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85070715342&partnerID=MN8TOARS Wang, J. P., Tunlaya-Anukit, S., Shi, R., Yeh, T.-F., Chuang, L., Isik, F., … Chiang, V. L. (2016). A Proteomic-Based Quantitative Analysis of the Relationship Between Monolignol Biosynthetic Protein Abundance and Lignin Content Using TransgenicPopulus trichocarpa. In Recent Advances in Polyphenol Research (Vol. 5, pp. 89–107). https://doi.org/10.1002/9781118883303.ch4 Mehlenbacher, B., Kelly, A. R., Kampe, C., & Kittle Autry, M. (2016). Instructional Design for Online Learning Environments and the Problem of Collaboration in the Cloud. Journal of Technical Writing and Communication, 48(2), 199–221. https://doi.org/10.1177/0047281616679112 Gabr, M. (2016). Year in Review. J. Geotech. Geoenviron. Eng., 142(5), 01616001. https://doi.org/10.1061/(asce)gt.1943-5606.0001510 Mousavi, S. H., Gabr, M., & Borden, R. (2016). SUBGRADE RESILIENT MODULUS PREDICTION FROM LIGHT WEIGHT DEFLECTOMETER. Canadian Geotechnical Journal, 10(3), 304–312. https://doi.org/10.1139/cgj-2016-0062 Del Giudice, D. (2016). Health. Science, 354(6308). https://doi.org/10.1126/science.354.6308.46 Giudice, D. D., Albert, C., Rieckermann, J., & Reichert, P. (2016). Describing the catchment-averaged precipitation as a stochastic process improves parameter and input estimation. Water Resour. Res., 3, n/a-n/a. https://doi.org/10.1002/2015wr017871 Graver, B. M., & Frey, H. C. (2016). Highway Vehicle Emissions Avoided by Diesel Passenger Rail Service Based on Real-World Data. Urban Rail Transit, 2(3-4), 153–171. https://doi.org/10.1007/s40864-016-0044-y Gabr, M., Butler, C., Rasdorf, W., Findley, D., & Bert, S. (2016). Highway Retaining Walls are Assets – A Risk-Based Approach for Managing Them. Geostrata, (March/April). Rasdorf, W., Butler, C. J., Findley, D. J., Gabr, M. A., & Bert, S. A. (2016). A Framework for Defining Asset Features to Monitor and Assess Earth Retaining Structures. Proceedings of the Transportation Research Board 94th Annual Meeting, 16–0002. Washington, DC: Transportation Research Board of the National Academies. Findley, D. J. (2016). Traffic Engineering Studies. In Traffic Engineering Handbook (pp. 109–148). https://doi.org/10.1002/9781119174738.ch4 Odman, M. T., Hu, Y., & Garcia-Menendez, F. (2016). Atmospheric Plume Modeling with a Three-Dimensional Refinement Adaptive Grid Method. In Springer Proceedings in Complexity (pp. 409–413). https://doi.org/10.1007/978-3-319-24478-5_67 Horne, D., Findley, D. J., Coble, D. G., Rickabaugh, T. J., & Martin, J. B. (2016). Evaluation of radar vehicle detection at four quadrant gate rail crossings. Journal of Rail Transport Planning & Management, 6(2), 149–162. https://doi.org/10.1016/j.jrtpm.2016.04.001 Khan, T., & Frey, H. C. (2016). Geospatial variation of real-world emissions from a passenger car. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 4, 2799–2822. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85014820615&partnerID=MN8TOARS Le, C., Lehrter, J. C., Hu, C., & Obenour, D. R. (2016). Satellite‐based empirical models linking river plume dynamics with hypoxic area and volume. Geophysical Research Letters, 43(6), 2693–2699. https://doi.org/10.1002/2015GL067521 Han, K. K., Muthukumar, B., & Golparvar-Fard, M. (2016). Enhanced Appearance-Based Material Classification for the Monitoring of Operation-Level Construction Progress through the Removal of Occlusions. Construction Research Congress 2016. https://doi.org/10.1061/9780784479827.089 Hurtado, D. C., Yang, R., Bardaka, E., Gkritza, K., & Fricker, J. (2016). EconWorks tools for assessing the wider economic benefits of transportation implementation assistance. In Technical Report. https://doi.org/10.5703/1288284316553 Vogel, R. M., & Arumugam, S. (2016). Flood forecasting a global perspective foreword. Flood Forecasting: A Global Perspective, XVII-. https://doi.org/10.1016/b978-0-12-801884-2.10000-3 Findley, D. J. (2016). horizontal and vertical alignment. Highway Engineering: Planning, Design, and Operations, 89–166. https://doi.org/10.1016/b978-0-12-801248-2.00003-4 Findley, D. J. (2016). Highway geometric design. Highway Engineering: Planning, Design, and Operations, 167–253. https://doi.org/10.1016/b978-0-12-801248-2.00004-6 Findley, D. J. (2016). Highway engineering planning, design, and operations introduction. Highway Engineering: Planning, Design, and Operations, 1–16. Agbelie, B. R. D. K., Volovski, M., Zhang, Z., Bardaka, E., Labi, S., & Sinha, K. C. (2016). Updating State and Local Highway Cost Allocation and Revenue Attribution: A Case Study for Indiana. TRANSPORTATION RESEARCH RECORD, 2597(2597), 1–10. https://doi.org/10.3141/2597-01 Bardaka, E., Zhang, Z., Labi, S., Sinha, K. C., & Mannering, F. (2016). Statistical Assessment of the Cost Effectiveness of Highway Pavement Warranty Contracts. JOURNAL OF INFRASTRUCTURE SYSTEMS, 22(3). https://doi.org/10.1061/(asce)is.1943-555x.0000299 Palanievelu, P., Zapata, C. E., & Underwood, B. S. (2016). Effect of as-compacted moisture content and density on pavement performance in different climatic regimes. Proceedings of the Joint Geotechnical and Structural Engineering Congress. https://doi.org/10.1061/9780784479742.109 Bardaka, E., Pyrialakou, D., & Gkritza, K. (2016). Assessing the socioeconomic effects of transit rail development: An exploration of displacement and gentrification. 95th Annual Meeting of the Transportation Research Board. Gundla, A., & Underwood, B. S. (2016). Using repeated stress sweep to investigate non-linearity in asphalt binders and mastics by fourier transform analysis. Proceedings International Society on Asphalt Pavements Symposium. Medina, J., & Underwood, B. S. (2016). Use of particulate composite models and crumb rubber swelling to estimate stiffness of rubberized asphalt binders. International Society on Asphalt Pavements Symposium. Noorvand, H., Underwood, B. S., & Sai, G. (2016). The implications of uniform distribution of trucks on flexible pavement performance and design. Arizona ITE-IMSA Annual Spring Conference. Gudipudi, P., & Underwood, B. S. (2016). Reliability analysis of fatigue life prediction from the viscoelastic continuum damage model. 95th Annual Meeting of the Transportation Research Board. Noorvand, H., & Underwood, B. S. (2016). Potential for impacts of autonomous vehicles on pavement infrastructure. 2016 Roads and Streets Conference. Gundla, A., Gudipudi, P., Medina, J., Salim, R., Zeiada, W., & Underwood, B. S. (2016). Investigation of aging in hydrated lime and portland cement modified asphalt concrete at multiple length scales. Journal of Materials in Civil Engineering, 28(5). Nagarajan, S., Khalil, J., & Underwood, B. S. (2016). Impact of forecasted freight trends on highway pavement infrastructure. Arizona ITE-IMSA Annual Spring Conference. Karki, P., Bhasin, A., & Underwood, B. S. (2016). Fatigue performance prediction of asphalt composites subjected to cyclic loading with intermittent rest periods. 95th Annual Meeting of the Transportation Research Board. Gundla, A., Gudipudi, P., & Underwood, B. S. (2016). Evaluation of the sensitivity of asphalt concrete modulus to binder oxidation with a multiple length scale study. 95th Annual Meeting of the Transportation Research Board. Mogawer, W., Austerman, A. A., & Underwood, B. S. (2016). Effect of binder modification on the performance of an ultrathin overlay pavement preservation strategy. 95th Annual Meeting of the Transportation Research Board. Mogawer, W., Austerman, A. A., & Underwood, B. S. (2016). Effect of binder modification on the performance of an ultrathin overlay pavement preservation strategy. Transportation Research Record, 1–7. Stempihar, J., Underwood, B. S., Nazar, S., & Kaloush, K. (2016). Durable fiber reinforced asphalt concrete friction courses for airfield runways. Proceedings International Society on Asphalt Pavements Symposium. Zeiada, W., Kaloush, K., Underwood, B. S., & Mamlouk, M. (2016). Development of test protocol to measure axial fatigue damage and healing. 95th Annual Meeting of the Transportation Research Board. Zeiada, W., Kaloush, K., Underwood, B. S., & M., M. (2016). Development of test protocol to measure axial fatigue damage and healing. Transportation Research Record, 10–18. Mensching, D., Daniel, J. S., & Underwood, B. S. (2016). Developing an indicator for fatigue cracking in hot mix asphalt pavements using viscoelastic continuum damage principles. 8th International RILEM Conference on Mechanisms of Cracking and Debonding in Pavements. Underwood, B. S. (2016). A nonlinear viscoelastic damage model for asphalt binder and mastics. 1st Transportation Research Congress. Medeiros, M., Underwood, B. S., Castorena, C., Rupnow, T., & Rawls, M. (2016). 3D measurement of pavement macrotexture using digital stereoscopic vision. 95th Annual Meeting of the Transportation Research Board. Gudipudi, P. P., & Underwood, B. S. (2016). Reliability Analysis of Fatigue Life Prediction from the Viscoelastic Continuum Damage Model. Transportation Research Record: Journal of the Transportation Research Board, 2576(1), 91–99. https://doi.org/10.3141/2576-10 Mensching, D., Daniel, J., & Underwood, B. S. (2016). Identifying indicators for fatigue cracking in hot mix asphalt pavements using viscoelastic continuum damage principles. Transportation Research Record, 2576, 28–39. Karki, P., Bhasin, A., & Underwood, B. S. (2016). Fatigue Performance Prediction of Asphalt Composites Subjected to Cyclic Loading with Intermittent Rest Periods. Transportation Research Record: Journal of the Transportation Research Board, 2576(1), 72–82. https://doi.org/10.3141/2576-08 Al-Amine, S. (2016). Understanding the role of cost, impact, and equity in point and non-point source nutrient reductions for basin scale stream water quality improvement. World Environmental and Water Resources Congress 2016: Professional Development, Innovative Technology, International Perspectives, and History and Heritage, 193–202. https://doi.org/10.1061/9780784479841.022 Al-Amin, S., Berglund, E. Z., & Mahinthakumar, K. (2016). Coupling agent-based and groundwater modeling to explore demand management strategies for shared resources. World Environmental and Water Resources Congress 2016: Watershed Management, Irrigation and Drainage, and Water Resources Planning and Management, 141–150. https://doi.org/10.1061/9780784479858.016 Li, W., Sankarasubramanian, A., Ranjithan, R. S., & Sinha, T. (2016). Role of multimodel combination and data assimilation in improving streamflow prediction over multiple time scales. Stochastic Environmental Research and Risk Assessment, 30(8), 2255–2269. https://doi.org/10.1007/s00477-015-1158-6 Bertani, I., Obenour, D. R., Steger, C. E., Stow, C. A., Gronewold, A. D., & Scavia, D. (2016). Probabilistically assessing the role of nutrient loading in harmful algal bloom formation in western Lake Erie. JOURNAL OF GREAT LAKES RESEARCH, 42(6), 1184–1192. https://doi.org/10.1016/j.jglr.2016.04.002 Sun, M., Arevalo, E., Strynar, M., Lindstrom, A., Richardson, M., Kearns, B., … Knappe, D. R. U. (2016). Legacy and Emerging Perfluoroalkyl Substances Are Important Drinking Water Contaminants in the Cape Fear River Watershed of North Carolina. ENVIRONMENTAL SCIENCE & TECHNOLOGY LETTERS, 3(12), 415–419. https://doi.org/10.1021/acs.estlett.6b00398 Krull, B., Patrick, J., Hart, K., White, S., & Sottos, N. (2016). Automatic Optical Crack Tracking for Double Cantilever Beam Specimens. EXPERIMENTAL TECHNIQUES, 40(3), 937–945. https://doi.org/10.1007/s40799-016-0094-9 Borden, M. J., Hughes, T. J. R., Landis, C. M., Anvari, A., & Lee, I. J. (2016). A phase-field formulation for fracture in ductile materials: Finite defonnation balance law derivation, plastic degradation, and stress triaxiality effects. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 312, 130–166. https://doi.org/10.1016/j.cma.2016.09.005 Aquila, G., Souza Rocha, L. C., Rotela Junior, P., Pamplona, E. de O., Queiroz, A. R., & Paiva, A. P. (2016). Wind power generation: An impact analysis of incentive strategies for cleaner energy provision in Brazil. JOURNAL OF CLEANER PRODUCTION, 137, 1100–1108. https://doi.org/10.1016/j.jclepro.2016.07.207 Montoya, B. M., Safavizadeh, S., & Meredith, A. (2016). The Use of Microbial Induced Calcite Precipitation to Reduce Trace Element Leaching from Fly Ash. Geo-Chicago 2016, (271), 989–997. https://doi.org/10.1061/9780784480144.098 Krull, B. P., Gergely, R. C. R., Cruz, W. A. S., Fedonina, Y. I., Patrick, J. F., White, S. R., & Sottos, N. R. (2016). Strategies for Volumetric Recovery of Large Scale Damage in Polymers. ADVANCED FUNCTIONAL MATERIALS, 26(25), 4561–4569. https://doi.org/10.1002/adfm.201600486 Hosseini, S. A. A., Howell, G., & Liu, M. (2016). Relationship between On-Site Planning Efforts and Work Plan Reliability. Construction Research Congress 2016: Old and New Construction Technologies Converge in Historic San Juan, 2129–2138. Nguyen, V. L., He, X., & Reyes, F. L. (2016). Quantifying in situ growth rate of a filamentous bacterial species in activated sludge using rrna:rdna ratio. FEMS Microbiology Letters, 363(22), fnw255. https://doi.org/10.1093/femsle/fnw255 Ayub, R., Obenour, D. R., Messier, K. P., Serre, M. L., & Mahinthakumar, K. (2016). Non-point source evaluation of groundwater contamination from agriculture under geologic and hydrologic uncertainty. World Environmental and Water Resources Congress 2016: Environmental, Sustainability, Groundwater, Hydraulic Fracturing, and Water Distribution Systems analysis, 329–336. https://doi.org/10.1061/9780784479865.035 Lunn, D., Lucier, G., Rizkalla, S., Cleland, N., & Gleich, H. (2016). New generation of precast concrete double tees reinforced by carbon-fiber-reinforced polymer grid response. PCI Journal, 87–89. Ben Naceur, I., Sai, K., Hassan, T., & Cailletaud, G. (2016). Micromechanical Modeling of the Ratcheting Behavior of 304 Stainless Steel. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 138(2). https://doi.org/10.1115/1.4032154 Orgut, R. E., Batouli, M., Zhu, J., Mostafavi, A., & Jaselskis, E. J. (2016). Metrics that matter: Evaluation of metrics and indicators for project progress measurement, performance assessment, and performance forecasting during construction. Construction Research Congress 2016: Old and New Construction Technologies Converge in Historic San Juan, 189–198. https://doi.org/10.1061/9780784479827.020 Zuluaga, C. M., Namian, M., & Albert, A. (2016). Impact of training methods on hazard recognition and risk perception in construction. Construction Research Congress 2016: Old and New Construction Technologies Converge in Historic San Juan, 2861–2871. https://doi.org/10.1061/9780784479827.285 Garcia-Cuerva, L., Berglund, E. Z., & Rivers, L. (2016). Exploring strategies for LID implementation in marginalized communities and urbanizing watersheds. Water, Wastewater, and Stormwater and Urban Watershed Symposium, 41–50. https://doi.org/10.1061/9780784479889.005 Namian, M., Zuluaga, C. M., & Albert, A. (2016). Critical factors that impact construction workers' hazard recognition performance. Construction Research Congress 2016: Old and New Construction Technologies Converge in Historic San Juan, 2762–2772. https://doi.org/10.1061/9780784479827.275 Almalki, A., Rasdorf, W., Pilson, C., Arnold, J., & Whitley, M. (2016). An infrastructure maintenance funding framework for a transportation agency. Construction Research Congress 2016: Old and New Construction Technologies Converge in Historic San Juan, 1435–1444. https://doi.org/10.1061/9780784479827.144 Ryu, Y., Gupta, A., Jung, W. Y., & Ju, B. S. (2016, December). A Reconciliation of Experimental and Analytical Results for Piping Systems. INTERNATIONAL JOURNAL OF STEEL STRUCTURES, Vol. 16, pp. 1043–1055. https://doi.org/10.1007/s13296-016-0019-6 Patrick, J. F., Robb, M. J., Sottos, N. R., Moore, J. S., & White, S. R. (2016). [Review of Polymers with autonomous life-cycle control]. NATURE, 540(7633), 363–370. https://doi.org/10.1038/nature21002 Lima, R. M., Osis, R., Queiroz, A. R., & Moreira Santos, A. H. (2016). Least-cost path analysis and multi-criteria assessment for routing electricity transmission lines. IET GENERATION TRANSMISSION & DISTRIBUTION, 10(16), 4222–4230. https://doi.org/10.1049/iet-gtd.2016.1119 Won, J., & Borden, R. C. (2016). Impact of glycerin and lignosulfonate on biodegradation of high explosives in soil. JOURNAL OF CONTAMINANT HYDROLOGY, 194, 1–9. https://doi.org/10.1016/j.jconhyd.2016.08.008 Lu, C.-C., Liu, J., Qu, Y., Peeta, S., Rouphail, N. M., & Zhou, X. (2016). Eco-system optimal time-dependent flow assignment in a congested network. TRANSPORTATION RESEARCH PART B-METHODOLOGICAL, 94, 217–239. https://doi.org/10.1016/j.trb.2016.09.015 Frey, H. C. (2016, September). Dose-Response Models are Conditional on Determination of Causality. RISK ANALYSIS, Vol. 36, pp. 1751–1754. https://doi.org/10.1111/risa.12672 Marciniak, K., Grabowska, K., Stempien, Z., Ciesielska-Wrobel, I., Rutkowska, A., & Taranek, D. (2016). Woven Fabrics Containing Hybrid Yarns for Shielding Electromagnetic Radiation. FIBRES & TEXTILES IN EASTERN EUROPE, 24(6), 109–115. https://doi.org/10.5604/12303666.1221744 Urban, M. W., Astaneh, A. V., Aquino, W., Greenleaf, J. F., & Guddati, M. N. (2016). Measured wave dispersion in tubes excited with acoustic radiation force matches theoretical guided wave dispersion. 2016 ieee international ultrasonics symposium (ius). https://doi.org/10.1109/ultsym.2016.7728821 Smyl, D., Hallaji, M., Seppanen, A., & Pour-Ghaz, M. (2016). Three-Dimensional Electrical Impedance Tomography to Monitor Unsaturated Moisture Ingress in Cement-Based Materials. TRANSPORT IN POROUS MEDIA, 115(1), 101–124. https://doi.org/10.1007/s11242-016-0756-1 Safaei, F., & Castorena, C. (2016). Temperature effects of linear amplitude sweep testing and analysis. Transportation Research Record, (2574), 92–100. Yeom, C., Rouphail, N. M., Rasdorf, W., & Schroeder, B. J. (2016). Simulation guidance for calibration of freeway lane closure capacity. Transportation Research Record, (2553), 82–89. Tanvir, S., Karmakar, N., Rouphail, N. M., & Schroeder, B. J. (2016). Modeling freeway work zones with mesoscopic dynamic traffic simulator validation, gaps, and guidance. Transportation Research Record, (2567), 122–130. Kim, S. K., Song, T.-J., Rouphail, N. M., Aghdashi, S., Amaro, A., & Goncalves, G. (2016). Exploring the association of rear-end crash propensity and micro-scale driver behavior. SAFETY SCIENCE, 89, 45–54. https://doi.org/10.1016/j.ssci.2016.05.016 Jung, W., Kwon, M., & Ju, B. (2016). Evaluation of compressive strength of concrete members laterally confined by various FRP composites and exposed to high temperatures. KSCE Journal of Civil Engineering, 20(6), 2410–2419. Jacques, C., Daniel, J. S., Bennert, T., Reinke, G., Norouzi, A., Ericson, C., … Kim, Y. R. (2016). Effect of Silo Storage Time on the Characteristics of Virgin and Reclaimed Asphalt Pavement Mixtures. TRANSPORTATION RESEARCH RECORD, (2573), 76–85. https://doi.org/10.3141/2573-10 Graver, B. M., Frey, H. C., & Hu, J. (2016). Effect of Biodiesel Fuels on Real-World Emissions of Passenger Locomotives. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 50(21), 12030–12039. https://doi.org/10.1021/acs.est.6b03567 Kim, S., Hajbabaie, A., Williams, B. M., & Rouphail, N. M. (2016). Dynamic Bandwidth Analysis for Coordinated Arterial Streets. JOURNAL OF INTELLIGENT TRANSPORTATION SYSTEMS, 20(3), 294–310. https://doi.org/10.1080/15472450.2015.1074575 Pour-Ghaz, M., Miller, B. L. H., Alla, O. K., & Rizkalla, S. (2016). Do mechanical and environmental loading have a synergistic effect on the degradation of pultruded glass fiber reinforced polymers? COMPOSITES PART B-ENGINEERING, 106, 344–355. https://doi.org/10.1016/j.compositesb.2016.09.007 Ahn, J., Cho, S., & Chung, D. H. (2016). Development of a statistical analysis model to benchmark the energy use intensity of subway stations. APPLIED ENERGY, 179, 488–496. https://doi.org/10.1016/j.apenergy.2016.06.065 Queiroz, A. R., Marangon Lima, L. M., Marangon Lima, J. W., Silva, B. C., & Scianni, L. A. (2016). Climate change impacts in the energy supply of the Brazilian hydro-dominant power system. RENEWABLE ENERGY, 99, 379–389. https://doi.org/10.1016/j.renene.2016.07.022 Jaunich, M. K., Levis, J. W., DeCarolis, J. F., Gaston, E. V., Barlaz, M. A., Bartelt-Hunt, S. L., … Jaikumar, R. (2016). Characterization of municipal solid waste collection operations. Resources, Conservation and Recycling, 114, 92–102. https://doi.org/10.1016/j.resconrec.2016.07.012 Castorena, C., Pape, S., & Mooney, C. (2016). Blending Measurements in Mixtures with Reclaimed Asphalt Use of Scanning Electron Microscopy with X-Ray Analysis. TRANSPORTATION RESEARCH RECORD, (2574), 57–63. https://doi.org/10.3141/2574-06 Cho, S.-H., & Kim, Y. R. (2016). Verification of Time-Temperature Superposition Principle for Shear Bond Failure of Interlayers in Asphalt Pavements. TRANSPORTATION RESEARCH RECORD, (2590), 18–27. https://doi.org/10.3141/2590-03 Wargo, A. D., Safavizadeh, S., & Kim, R. Y. (2016). The use of four-point bending notched beam fatigue tests to rank crack-mitigating interlayers. 8th rilem international symposium on testing and characterization of sustainable and innovative bituminous materials, 11, 359–370. Goodnight, J. C., Kowalsky, M. J., & Nau, J. M. (2016). Strain Limit States for Circular RC Bridge Columns. EARTHQUAKE SPECTRA, 32(3), 1627–1652. https://doi.org/10.1193/030315eqs036m Chatterjee, P., & Gupta, A. (2016). Seismic qualification of equipment: A pra-consistent framework. Proceedings of the 24th International Conference on Nuclear Engineering, 2016, vol 1. https://doi.org/10.1115/icone24-60674 Morrison, M. L., Schweizer, D. Q., & Hassan, T. (2016). Seismic Enhancement of Welded Unreinforced Flange-Bolted Web Steel Moment Connections. JOURNAL OF STRUCTURAL ENGINEERING, 142(11). https://doi.org/10.1061/(asce)st.1943-541x.0001575 Namian, M., Albert, A., Zuluaga, C. M., & Behm, M. (2016). Role of Safety Training: Impact on Hazard Recognition and Safety Risk Perception. JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, 142(12). https://doi.org/10.1061/(asce)co.1943-7862.0001198 Morrison, M. L., & Hassan, T. (2016). Resilient welded steel moment connections by enhanced beam buckling resistance. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 127, 77–91. https://doi.org/10.1016/j.jcsr.2016.07.012 Eshraghi, H., & Maleki, A. (2016). Reshaping energy policy for sustainable development: Curbing Iran's carbon emission monster via renewable energies. ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY, 11(9), 830–840. https://doi.org/10.1080/15567249.2013.810313 Goodnight, J. C., Kowalsky, M. J., & Nau, J. M. (2016). Modified Plastic-Hinge Method for Circular RC Bridge Columns. Journal of Structural Engineering, 142(11), 04016103. https://doi.org/10.1061/(asce)st.1943-541x.0001570 Kim, S. K., Warchol, S., Schroeder, B. J., & Cunningham, C. (2016). Innovative Method for Remotely Fine-Tuning Offsets Along a Diverging Diamond Interchange Corridor. TRANSPORTATION RESEARCH RECORD, (2557), 33–43. https://doi.org/10.3141/2557-04 Warchol, S., Schroeder, B. J., & Cunningham, C. (2016). Impact of exit ramp geometric treatments at diverging diamond interchanges on queue spillback. Transportation Research Record, (2556), 75–85. Cheng, Q., & Call, D. F. (2016). [Review of Hardwiring microbes via direct interspecies electron transfer: mechanisms and applications]. ENVIRONMENTAL SCIENCE-PROCESSES & IMPACTS, 18(8), 968–980. https://doi.org/10.1039/c6em00219f Rasdorf, W., Butler, C. J., Findley, D. J., Gabr, M. A., & Bert, S. A. (2016). Framework for Defining Asset Features to Monitor and Assess Earth-Retaining Structures. TRANSPORTATION RESEARCH RECORD, 2579(2579), 8–16. https://doi.org/10.3141/2579-02 Bodda, S. S., Sandhu, H. K., & Gupta, A. (2016). Fragility of a flood defense structure subjected to multi-hazard scenario. Proceedings of the 24th International Conference on Nuclear Engineering, 2016, vol 4. https://doi.org/10.1115/icone24-60508 Song, T. J., Park, S., & Oh, C. (2016). Field experiment for exploring the effects of in-vehicle warning information on driver's responsive behaviour. Journal of Engineering-JOE. Guddati, M. N., Druskin, V., & Astaneh, A. V. (2016). Exponential convergence through linear finite element discretization of stratified subdomains. JOURNAL OF COMPUTATIONAL PHYSICS, 322, 429–447. https://doi.org/10.1016/j.jcp.2016.06.045 Thompson, K. A., Shimabuku, K. K., Kearns, J. P., Knappe, D. R. U., Summers, R. S., & Cook, S. M. (2016). Environmental Comparison of Biochar and Activated Carbon for Tertiary Wastewater Treatment. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 50(20), 11253–11262. https://doi.org/10.1021/acs.est.6b03239 Sabouri, M., Choi, Y.-T., Wang, Y., Hwang, S., Baek, C., & Kim, R. Y. (2016). Effect of Rejuvenator on Performance Properties of WMA Mixtures with High RAP Content. 8TH RILEM INTERNATIONAL SYMPOSIUM ON TESTING AND CHARACTERIZATION OF SUSTAINABLE AND INNOVATIVE BITUMINOUS MATERIALS, Vol. 11, pp. 473–484. https://doi.org/10.1007/978-94-017-7342-3_38 Wang, Y., Norouzi, A., & Kim, Y. R. (2016). Comparison of Fatigue Cracking Performance of Asphalt Pavements Predicted by Pavement ME and LVECD Programs. TRANSPORTATION RESEARCH RECORD, (2590), 44–55. https://doi.org/10.3141/2590-06 Kwag, S., & Gupta, A. (2016). Bayesian network technique in probabilistic risk assessment for multiple hazards. Proceedings of the 24th International Conference on Nuclear Engineering, 2016, vol 4. Li, L., Ngaile, G., & Hassan, T. (2016). A novel hybrid heating method for elevated temperature mechanical testing of miniature specimens. Proceedings of the ASME 11th International Manufacturing Science and Engineering Conference, 2016, vol 1. https://doi.org/10.1115/msec2016-8852 Hyland, M., Hunter, H., Liu, J., Veety, E., & Vashaee, D. (2016). Wearable thermoelectric generators for human body heat harvesting. APPLIED ENERGY, 182, 518–524. https://doi.org/10.1016/j.apenergy.2016.08.150 Ryu, Y., & Matzen, V. C. (2016). The nonlinear behavior of threaded piping connections: Application using a modified Ramberg-Osgood model. OCEAN ENGINEERING, 127, 1–6. https://doi.org/10.1016/j.oceaneng.2016.09.030 Smyl, D., Hallaji, M., Seppanen, A., & Pour-Ghaz, M. (2016). Quantitative electrical imaging of three-dimensional moisture flow in cement-based materials. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 103, 1348–1358. https://doi.org/10.1016/j.ijheatmasstransfer.2016.08.039 Smyl, D., Ghasemzadeh, F., & Pour-Ghaz, M. (2016). Modeling water absorption in concrete and mortar with distributed damage. Construction & Building Materials, 125, 438–449. https://doi.org/10.1016/j.conbuildmat.2016.08.044 Safaei, F., Castorena, C., & Kim, Y. R. (2016). Linking asphalt binder fatigue to asphalt mixture fatigue performance using viscoelastic continuum damage modeling. MECHANICS OF TIME-DEPENDENT MATERIALS, 20(3), 299–323. https://doi.org/10.1007/s11043-016-9304-1 Khan, T., & Frey, H. C. (2016). Evaluation of Light-Duty Gasoline Vehicle Rated Fuel Economy Based on In-Use Measurements. TRANSPORTATION RESEARCH RECORD, 2570(2570), 21–29. https://doi.org/10.3141/2570-03 Voss, A., Pour-Ghaz, M., Vauhkonen, M., & Seppanen, A. (2016). Electrical capacitance tomography to monitor unsaturated moisture ingress in cement-based materials. CEMENT AND CONCRETE RESEARCH, 89, 158–167. https://doi.org/10.1016/j.cemconres.2016.07.011 Hu, J., Frey, H. C., & Washburn, S. S. (2016). Comparison of Vehicle-Specific Fuel Use and Emissions Models Based on Externally and Internally Observable Activity Data. TRANSPORTATION RESEARCH RECORD, 2570(2570), 30–38. https://doi.org/10.3141/2570-04 Cruz, F. B., Green, R. B., Hater, G. R., Chanton, J. P., Thoma, E. D., Harvey, T. A., & Barlaz, M. A. (2016). Comparison of Field Measurements to Methane Emissions Models at a New Landfill. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 50(17), 9432–9441. https://doi.org/10.1021/acs.est.6b00415 Arroyo, P., Fuenzalida, C., Albert, A., & Hallowell, M. R. (2016). Collaborating in decision making of sustainable building design: An experimental study comparing CBA and WRC methods. ENERGY AND BUILDINGS, 128, 132–142. https://doi.org/10.1016/j.enbuild.2016.05.079 Kandiah, V. K., Berglund, E. Z., & Binder, A. R. (2016). Cellular Automata Modeling Framework for Urban Water Reuse Planning and Management. JOURNAL OF WATER RESOURCES PLANNING AND MANAGEMENT, 142(12). https://doi.org/10.1061/(asce)wr.1943-5452.0000696 Samstag, R. W., Ducoste, J. J., Griborio, A., Nopens, I., Batstone, D. J., Wicks, J. D., … al. (2016). CFD for wastewater treatment: an overview. WATER SCIENCE AND TECHNOLOGY, 74(3), 549–563. https://doi.org/10.2166/wst.2016.249 Cook, T. J., Sarah W. O'Brien, Jackson, K. N., Findley, D. J., & Searcy, S. E. (2016). Behavioral Effects of Completing a Critical Link in the American Tobacco Trail. TRANSPORTATION RESEARCH RECORD, 2598(2598), 19–26. https://doi.org/10.3141/2598-03 Javanmardi, A., Abbasian-Hosseini, S. A., Liu, M., & Hsiang, S. M. (2016). Analysis of Workflow Variability's Impacts on Trade and Project Performance. ICSDEC 2016 - INTEGRATING DATA SCIENCE, CONSTRUCTION AND SUSTAINABILITY, Vol. 145, pp. 281–287. https://doi.org/10.1016/j.proeng.2016.04.075 Keshavarzi, B., & Kim, Y. R. (2016). A viscoelastic-based model for predicting the strength of asphalt. concrete in direct tension. CONSTRUCTION AND BUILDING MATERIALS, 122, 721–727. https://doi.org/10.1016/j.conbuildmat.2016.06.089 Ahmed, R., Barrett, P. R., & Hassan, T. (2016). Unified viscoplasticity modeling for isothermal low-cycle fatigue and fatigue-creep stress-strain responses of Haynes 230. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 88-89, 131–145. https://doi.org/10.1016/j.ijsolstr.2016.03.012 Hodge, K. L., Levis, J. W., DeCarolis, J. F., & Barlaz, M. A. (2016). Systematic Evaluation of Industrial, Commercial, and Institutional Food Waste Management Strategies in the United States. Environmental Science & Technology, 50(16), 8444–8452. https://doi.org/10.1021/acs.est.6b00893 Che, W. W., Frey, H. C., & Lau, A. K. H. (2016). Sequential Measurement of Intermodal Variability in Public Transportation PM2.5 and CO Exposure Concentrations. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 50(16), 8760–8769. https://doi.org/10.1021/acs.est.6b01594 Lang, J. R., Allred, B. M. K., Peaslee, G. F., Field, J. A., & Barlaz, M. A. (2016). Release of Per- and Polyfluoroalkyl Substances (PFASs) from Carpet and Clothing in Model Anaerobic Landfill Reactors. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 50(10), 5024–5032. https://doi.org/10.1021/acs.est.5b06237 Barrett, P. R., Ahmed, R., Menon, M., & Hassan, T. (2016). Isothermal low-cycle fatigue and fatigue-creep of Haynes 230. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 88-89, 146–164. https://doi.org/10.1016/j.ijsolstr.2016.03.011 Namian, M., Albert, A., Zuluaga, C. M., & Jaselskis, E. J. (2016). Improving Hazard-Recognition Performance and Safety Training Outcomes: Integrating Strategies for Training Transfer. JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, 142(10). https://doi.org/10.1061/(asce)co.1943-7862.0001160 Shay, E., Combs, T. S., Findley, D., Kolosna, C., Madeley, M., & Salvesen, D. (2016). Identifying transportation disadvantage: Mixed-methods analysis combining GIS mapping with qualitative data. TRANSPORT POLICY, 48, 129–138. https://doi.org/10.1016/j.tranpol.2016.03.002 Wang, C., Zhang, H., Castorena, C., Zhang, J., & Kim, Y. R. (2016). Identifying fatigue failure in asphalt binder time sweep tests. CONSTRUCTION AND BUILDING MATERIALS, 121, 535–546. https://doi.org/10.1016/j.conbuildmat.2016.06.020 Aung, T. W., Jain, G., Sethuraman, K., Baumgartner, J., Reynolds, C., Grieshop, A. P., … Brauer, M. (2016). Health and Climate-Relevant Pollutant Concentrations from a Carbon-Finance Approved Cookstove Intervention in Rural India. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 50(13), 7228–7238. https://doi.org/10.1021/acs.est.5b06208 Hajifathalian, K., Howell, G., Wambeke, B. W., Hsiang, S. M., & Liu, M. (2016). "Oops" Simulation: Cost-Benefits Trade-Off Analysis of Reliable Planning for Construction Activities. JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, 142(8). https://doi.org/10.1061/(asce)co.1943-7862.0001135 Blaney, L., Kandiah, R., Ducoste, J. J., Perlinger, J. A., & Bartelt-Hunt, S. L. (2016). Trends in Population and Demographics of US Environmental Engineering Students and Faculty from 2005 to 2013. ENVIRONMENTAL ENGINEERING SCIENCE, 33(8), 578–590. https://doi.org/10.1089/ees.2016.0063 Xiong, J., Fu, D., Singh, R. P., & Ducoste, J. J. (2016). Structural characteristics and development of the cake layer in a dynamic membrane bioreactor. SEPARATION AND PURIFICATION TECHNOLOGY, 167, 88–96. https://doi.org/10.1016/j.seppur.2016.04.040 Kazem, H., Guaderrama, L., Selim, H., Rizkalla, S., & Kobayashi, A. (2016). Strengthening of steel plates subjected to uniaxial compression using small-diameter CFRP strands. CONSTRUCTION AND BUILDING MATERIALS, 111, 223–236. https://doi.org/10.1016/j.conbuildmat.2016.02.028 He, X., So, M. J., & de los Reyes, F. L. (2016). Shifts in microbial communities in bioaugmented grease interceptors removing fat, oil, and grease (FOG). Applied Microbiology and Biotechnology, 100(16), 7025–7035. https://doi.org/10.1007/s00253-016-7398-7 DeCarolis, J. F., Babaee, S., Li, B., & Kanungo, S. (2016). Modelling to generate alternatives with an energy system optimization model. ENVIRONMENTAL MODELLING & SOFTWARE, 79, 300–310. https://doi.org/10.1016/j.envsoft.2015.11.019 Cholake, S. T., Moran, G., Joe, B., Bai, Y., Raman, R. K. S., Zhao, X. L., … Bandyopadhyay, S. (2016). Improved Mode I fracture resistance of CFRP composites by reinforcing epoxy matrix with recycled short milled carbon fibre. CONSTRUCTION AND BUILDING MATERIALS, 111, 399–407. https://doi.org/10.1016/j.conbuildmat.2016.02.039 Doll, B., Jennings, G., Spooner, J., Penrose, D., Usset, J., Blackwell, J., & Fernandez, M. (2016). Identifying watershed, landscape, and engineering design factors that influence the biotic condition of restored streams. Water, 8(4). https://doi.org/10.3390/w8040151 Saha, P. K., & Grieshop, A. P. (2016). Exploring Divergent Volatility Properties from Yield and Thermodenuder Measurements of Secondary Organic Aerosol from alpha-Pinene Ozonolysis. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 50(11), 5740–5749. https://doi.org/10.1021/acs.est.6b00303 Vereen, S. C., Rasdorf, W., & Hummer, J. E. (2016). Development and Comparative Analysis of Construction Industry Labor Productivity Metrics. JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, 142(7). https://doi.org/10.1061/(asce)co.1943-7862.0001112 Sun, W., Sun, M., & Barlaz, M. A. (2016). Characterizing the biotransformation of sulfur-containing wastes in simulated landfill reactors. WASTE MANAGEMENT, 53, 82–91. https://doi.org/10.1016/j.wasman.2016.01.028 Doll, B., Jennings, G., Spooner, J., Penrose, D., Usset, J., Blackwell, J., & Fernandez, M. (2016). Can rapid assessments predict the biotic condition of restored streams? Water, 8(4). https://doi.org/10.3390/w8040143 Shafiee, M. E., & Berglund, E. Z. (2016). Agent-based modeling and evolutionary computation for disseminating public advisories about hazardous material emergencies. COMPUTERS ENVIRONMENT AND URBAN SYSTEMS, 57, 12–25. https://doi.org/10.1016/j.compenvurbsys.2016.01.001 Astaneh, A. V., & Guddati, M. N. (2016). A two-level domain decomposition method with accurate interface conditions for the Helmholtz problem. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 107(1), 74–90. https://doi.org/10.1002/nme.5164 Baugh, J., & Liu, S. (2016). A general characterization of the Hardy Cross method as sequential and multiprocess algorithms. STRUCTURES, 6, 170–181. https://doi.org/10.1016/j.istruc.2016.03.004 Cao, W., & Kim, Y. R. (2016). The extended shift model as a mechanistic-empirical approach to simulating confined permanent deformation of asphalt concrete in compression. CONSTRUCTION AND BUILDING MATERIALS, 115, 520–526. https://doi.org/10.1016/j.conbuildmat.2016.04.079 Rawls, M., Im, J. H., & Castorena, C. (2016). Tack Lifter for In Situ Measurement of Effective Emulsion Application Rates. TRANSPORTATION RESEARCH RECORD, (2550), 80–88. https://doi.org/10.3141/2550-11 Shafiee, M. E., Berglund, A., Berglund, E. Z., Brill, E. D., Jr., & Mahinthakumar, G. (2016). Parallel Evolutionary Algorithm for Designing Water Distribution Networks to Minimize Background Leakage. Journal of Water Resources Planning and Management, 142(5). https://doi.org/10.1061/(asce)wr.1943-5452.0000601 Astaneh, A. V., & Guddati, M. N. (2016). Improved inversion algorithms for near-surface characterization. GEOPHYSICAL JOURNAL INTERNATIONAL, 206(2), 1410–1423. https://doi.org/10.1093/gji/ggw192 Wicklein, E., Batstone, D. J., Ducoste, J., Laurent, J., Griborio, A., Wicks, J., … al. (2016). Good modelling practice in applying computational fluid dynamics for WWTP modelling. WATER SCIENCE AND TECHNOLOGY, 73(5), 969–982. https://doi.org/10.2166/wst.2015.565 Jameson, M., White, J. G., Osmond, D. L., & Aziz, T. (2016). Determination of Biosolids Phosphorus Solubility and Its Relationship to Wastewater Treatment. WATER ENVIRONMENT RESEARCH, 88(7), 602–610. https://doi.org/10.2175/106143016x14609975746406 Wang, X., & Barlaz, M. A. (2016). Decomposition and carbon storage of hardwood and softwood branches in laboratory-scale landfills. Science of The Total Environment, 557-558, 355–362. https://doi.org/10.1016/J.SCITOTENV.2016.03.091 Ghasemzadeh, F., Rashetnia, R., Smyl, D., & Pour-Ghaz, M. (2016). A comparison of methods to evaluate mass transport in damaged mortar. CEMENT & CONCRETE COMPOSITES, 70, 119–129. https://doi.org/10.1016/j.cemconcomp.2016.03.007 Li, W., Pour-Ghaz, M., Trtik, P., Wyrzykowski, M., Muench, B., Lura, P., … Weiss, W. J. (2016). Using neutron radiography to assess water absorption in air entrained mortar. CONSTRUCTION AND BUILDING MATERIALS, 110, 98–105. https://doi.org/10.1016/j.conbuildmat.2016.02.001 Fernandes, P., Bandeira, J. M., Fontes, T., Pereira, S. R., Schroeder, B. J., Rouphail, N. M., & Coelho, M. C. (2016). Traffic restriction policies in an urban avenue: A methodological overview for a trade-off analysis of traffic and emission impacts using microsimulation. INTERNATIONAL JOURNAL OF SUSTAINABLE TRANSPORTATION, 10(3), 201–215. https://doi.org/10.1080/15568318.2014.885622 Rashetnia, R., Ghasemzadeh, F., & Pour-Ghaz, M. (2016). The Consequences of Material Nonlinearity on the Axisymmetric Flexural Vibration Measurements for Estimating the Dynamic Elastic Modulus of Damaged Cement Based Materials. JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 14(6), 287–298. https://doi.org/10.3151/jact.14.287 Hartline, R. M., & Call, D. F. (2016). Substrate and electrode potential affect electrotrophic activity of inverted bioanodes. BIOELECTROCHEMISTRY, 110, 13–18. https://doi.org/10.1016/j.bioelechem.2016.02.010 Queiroz, A. R. (2016). [Review of Stochastic hydro-thermal scheduling optimization: An overview]. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 62, 382–395. https://doi.org/10.1016/j.rser.2016.04.065 Butler, C. J., Gabr, M. A., Rasdorf, W., Findley, D. J., Chang, J. C., & Hammit, B. E. (2016). Retaining Wall Field Condition Inspection, Rating Analysis, and Condition Assessment. Journal of Performance of Constructed Facilities, 30(3). https://doi.org/10.1061/(asce)cf.1943-5509.0000785 Garcia-Cuerva, L., Berglund, E. Z., & Binder, A. R. (2016). Public perceptions of water shortages, conservation behaviors, and support for water reuse in the US. RESOURCES CONSERVATION AND RECYCLING, 113, 106–115. https://doi.org/10.1016/j.resconrec.2016.06.006 Russell, M. M., Liu, M., & Hsiang, S. M. (2016). Planning for uncertainty: Use of structural equation modelling to determine the causal structure of time buffer allocation. Construction Management and Economics, 33(10), 783–798. Norouzi, A., Kim, D., & Kim, Y. R. (2016). Numerical evaluation of pavement design parameters for the fatigue cracking and rutting performance of asphalt pavements. MATERIALS AND STRUCTURES, 49(9), 3619–3634. https://doi.org/10.1617/s11527-015-0744-x Veytskin, Y., Bobko, C., & Castorena, C. (2016). Nanoindentation and Atomic Force Microscopy Investigations of Asphalt Binder and Mastic. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 28(6). https://doi.org/10.1061/(asce)mt.1943-5533.0001532 Baugh, J., & Altuntas, A. (2016). Modeling a Discrete Wet-Dry Algorithm for Hurricane Storm Surge in Alloy (M. Butler, K.-D. Schewe, A. Mashkoor, & M. Biro, Eds.). ABSTRACT STATE MACHINES, ALLOY, B, TLA, VDM, AND Z (ABZ 2016), Vol. 9675, pp. 256–261. https://doi.org/10.1007/978-3-319-33600-8_18 Torrao, G., Fontes, T., Coelho, M., & Rouphail, N. (2016). Integrated indicator to evaluate vehicle performance across: Safety, fuel efficiency and green domains. ACCIDENT ANALYSIS AND PREVENTION, 92, 153–167. https://doi.org/10.1016/j.aap.2016.03.008 Feng, K., & Montoya, B. M. (2016). Influence of Confinement and Cementation Level on the Behavior of Microbial-Induced Calcite Precipitated Sands under Monotonic Drained Loading. JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING, 142(1). https://doi.org/10.1061/(asce)gt.1943-5606.0001379 Kong, C., & Kowalsky, M. J. (2016). Impact of Damping Scaling Factors on Direct Displacement-Based Design. Earthquake Spectra, 32(2), 843–859. https://doi.org/10.1193/021815eqs031m Seo, S. B., Sinha, T., Mahinthakumar, G., Sankarasubramanian, A., & Kumar, M. (2016). Identification of dominant source of errors in developing streamflow and groundwater projections under near-term climate change. JOURNAL OF GEOPHYSICAL RESEARCH-ATMOSPHERES, 121(13), 7652–7672. https://doi.org/10.1002/2016jd025138 Iasmin, M., Dean, L. O., & Ducoste, J. J. (2016). Quantifying fat, oil, and grease deposit formation kinetics. WATER RESEARCH, 88, 786–795. https://doi.org/10.1016/j.watres.2015.11.009 Im, J. H., & Kim, Y. R. (2016). Performance Evaluation of Chip Seals for Higher Volume Roads Using Polymer-Modified Emulsions: Laboratory and Field Study in North Carolina. JOURNAL OF TESTING AND EVALUATION, 44(1), 484–497. https://doi.org/10.1520/jte20140544 Vaughan, C., Jagadish, C., Bharadwaj, S., Cunningham, C. M., Schroeder, B. J., Hummer, J. E., … Rouphail, N. M. (2016). Long-term monitoring of wrong-way maneuvers at diverging diamond interchanges. Transportation Research Record, (2484), 129–139. Abdul, J. M., Vigneswaran, S., Kandasamy, J., & Mahinthakumar, G. (2016). Fenton Oxidation of Metsulfuron-Methyl with Application to Permeable Reactive Barriers. ENVIRONMENTAL MODELING & ASSESSMENT, 21(1), 149–158. https://doi.org/10.1007/s10666-015-9475-1 Khan, E., Kowalsky, M. J., & Nau, J. M. (2016). Equivalent Viscous Damping Model for Short-Period Reinforced Concrete Bridges. Journal of Bridge Engineering, 21(2), 04015047. https://doi.org/10.1061/(asce)be.1943-5592.0000803 Abbasian-Hosseini, S. A., Leming, M. L., & Liu, M. (2016). Effects of Idle Time Restrictions on Excess Pollution from Construction Equipment. Journal of Management in Engineering, 32(2), 04015046. https://doi.org/10.1061/(asce)me.1943-5479.0000408 Cao, W., & Kim, Y. R. (2016). A viscoplastic model for the confined permanent deformation of asphalt concrete in compression. MECHANICS OF MATERIALS, 92, 235–247. https://doi.org/10.1016/j.mechmat.2015.10.001 Patanakul, P., Kwak, Y. H., Zwikael, O., & Liu, M. (2016). What impacts the performance of large-scale government projects? INTERNATIONAL JOURNAL OF PROJECT MANAGEMENT, 34(3), 452–466. https://doi.org/10.1016/j.ijproman.2015.12.001 Eslaminia, M., & Guddati, M. N. (2016). Fourier-finite element analysis of pavements under moving vehicular loading. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 17(7), 602–614. https://doi.org/10.1080/10298436.2015.1007237 Astaneh, A. V., & Guddati, M. N. (2016). Efficient computation of dispersion curves for multilayered waveguides and half-spaces. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 300, 27–46. https://doi.org/10.1016/j.cma.2015.11.019 List, G., Mashayekhi, M., Bertini, R. L., & Nevers, B. (2016). Development of a Transportation System Simulation Manual Framework From Theory to Practice. TRANSPORTATION RESEARCH RECORD, (2561), 45–52. https://doi.org/10.3141/2561-06 Cruz, F. B., Osborne, J., & Barlaz, M. A. (2016). Determination of sources of organic matter in solid waste by analysis of phenolic copper oxide oxidation products of lignin. Journal of Environmental Engineering (New York, N.Y.), 142(2). Sun, M., Lopez-Velandia, C., & Knappe, D. R. U. (2016). Determination of 1,4-Dioxane in the Cape Fear River Watershed by Heated Purge-and-Trap Preconcentration and Gas Chromatography-Mass Spectrometry. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 50(5), 2246–2254. https://doi.org/10.1021/acs.est.5b05875 Al Gharably, M., DeCarolis, J. F., & Ranjithan, S. R. (2016). An enhanced linear regression-based building energy model (LRBEM plus ) for early design. JOURNAL OF BUILDING PERFORMANCE SIMULATION, 9(2), 115–133. https://doi.org/10.1080/19401493.2015.1004108 Aghazadeh Ardebili, Z., Gabr, M. A., & Rahman, M. S. (2016). Uplift Capacity of Plate Anchors in Saturated Clays: Analyses with Different Constitutive Models. International Journal of Geomechanics, 16(2). https://doi.org/10.1061/(asce)gm.1943-5622.0000518 Dyer, T., & Baugh, J. (2016). SMT: An interface for localized storm surge modeling. ADVANCES IN ENGINEERING SOFTWARE, 92, 27–39. https://doi.org/10.1016/j.advengsoft.2015.10.003 Sandhu, G. S., Frey, H. C., Bartelt-Hunt, S., & Jones, E. (2016). Real-world activity, fuel use, and emissions of diesel side-loader refuse trucks. ATMOSPHERIC ENVIRONMENT, 129, 98–104. https://doi.org/10.1016/j.atmosenv.2016.01.014 Cunningham, C. M., Findley, D. J., Hovey, K., Foley, P. B., Smith, J., Fowler, T., … Hummer, J. E. (2016). Improved Asset Management and Inventory Development through Sample Analysis and Vendor-Client Communication. JOURNAL OF INFRASTRUCTURE SYSTEMS, 22(1). https://doi.org/10.1061/(asce)is.1943-555x.0000260 Hajbabaie, A., Aghdashi, S., & Rouphail, N. M. (2016). Enhanced Decision-Making Framework Using Reliability Concepts for Freeway Facilities. Journal of Transportation Engineering, 142(4), 04016008. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000797 Fulmer, S. J., Nau, J. M., Kowalsky, M. J., & Marx, E. E. (2016). Development of a ductile steel bridge substructure system. Journal of Constructional Steel Research, 118, 194–206. https://doi.org/10.1016/j.jcsr.2015.11.012 Mei, K., Seracino, R., & Lv, Z. (2016). An experimental study on bond-type anchorages for carbon fiber-reinforced polymer cables. CONSTRUCTION AND BUILDING MATERIALS, 106, 584–591. https://doi.org/10.1016/j.conbuildmat.2015.12.059 Sun, M., Sun, W. J., & Barlaz, M. A. (2016). A batch assay to measure microbial hydrogen sulfide production from sulfur-containing solid wastes. Science of the Total Environment, 551, 23–31. Ryu, Y., Jung, W., & Ju, B. (2016). Vibration effects of nonclassically damped building-piping systems subjected to extreme loads. Shock and Vibration. Veytskin, Y., Bobko, C., & Castorena, C. (2016). Nanoindentation investigation of asphalt binder and mastic viscoelasticity. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 17(4), 363–376. https://doi.org/10.1080/10298436.2014.993393 Dehghan Banadaki, A., Guddati, M. N., & Kim, Y. R. (2016). An algorithm for virtual fabrication of air voids in asphalt concrete. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 17(3), 225–232. https://doi.org/10.1080/10298436.2014.979822 Eslaminia, M., & Guddati, M. N. (2016). A double-sweeping preconditioner for the Helmholtz equation. JOURNAL OF COMPUTATIONAL PHYSICS, 314, 800–823. https://doi.org/10.1016/j.jcp.2016.03.022 List, G. F., & Mashayekhi, M. (2016). A Modular Colored Stochastic Petri Net for Modeling and Analysis of Signalized Intersections. IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS, 17(3), 701–713. https://doi.org/10.1109/tits.2015.2483324