Civil, Construction, and Environmental Engineering - 2009
Baron, R., Lomborg, B., David Montgomery, W., Tuladhar, S., Kandlikar, M., Reynolds, C., … Lomborg, B. (2009). Black Carbon Mitigation. https://doi.org/10.1017/CBO9780511779015.005
Sobremisana, A., de lose Reyes, F. L., III, & Ducoste, J. J. (2009). Simultaneous Modeling Carbon and Nitrogen Removal under the Influence of Floc Size Distribution. Presented at the NC American WaterWorks Association/Water Environment Association Annual Conference, Raleigh, NC.
de los Reyes, F., & Ducoste, J. (2009). Factors Affecting the Formation of FOG Deposits in Sewer Lines. Presented at the Urban Water Consortium Meeting, Burlington, NC.
Alpert, S. M., & Ducoste, J. J. (2009). Validation of CFD Models Simulating the UV/H2O2 Advanced Oxidation Process. Presented at the North Carolina American Water Works Association (AWWA) & Water Environment Association (WEA) Conference, Raleigh, NC.
Ducoste, J. J. (2009). Computational Fluid Dynamics as an Integral Part of Water and Wastewater Treatment Process Design. Influents: Water Environment Association of Ontario, 4, 40–44.
Ducoste, J. J. (2009). Simulating Ultraviolet Advance Oxidation Processes in Continuous Flow UV Reactors. Presented at the University of Michigan, Ann Arbor, MI.
Ducoste, J. J. (2009). CFD Modeling for UV Disinfection and UV-Initiated Advanced Oxidation Processes. Presented at the Disinfection, Atlanta, GA.
Ducoste, J. J. (2009). Analysis of Fat, Oil, and Grease (FOG) in Sanitary Sewer Systems: Challenges to a Sustainable system. Presented at the Villanova University, Villanova, PA.
Nopens, I., Ducoste, J. J., & Briesen, H. (Eds.). (2009). Advances in Population Balance Modeling. In Chemical Engineering Science (Vol. 64).
Ducoste, J. J. (2009). Computational Fluid Dynamics Modeling for Unit Process simulations in Drinking Water Treatment. Presented at the Water Reuse Workshop, Polytechnic University at Bari, Taranto, Italy.
Ducoste, J. J. (2009). Population Balance Modeling in CFD Simulations. Presented at the Water Reuse Workshop, Polytechnic University at Bari, Taranto, Italy.
Ducoste, J. J. (2009). The Intricacies of Analyzing/Designing Ultraviolet UV Disinfection Reactors using CFD. Presented at the Water Reuse Workshop, Polytechnic University at Bari. Taranto, Italy.
Staley, B. F., & Barlaz, M. A. (2009). Estimating Carbon Sequestration and Gas Production in Solid Waste Using Waste Composition. Presented at the Association of Environmental Engineering and Science Professionals (AEESP) Frontiers Conference, Iowa City, Iowa.
De La Cruz, F., & Barlaz, M. A. (2009). A Method to Estimate Carbon Sequestration from Excavated Refuse Samples. Presented at the First International Greenhouse Gas Measurement Symposium, Air and Waste Management Association, San Francisco, CA.
Reale-Levis, J. L., Barlaz, M. A., & Ranjithan, S. R. (2009). Life-Cycle Inventory Model for Commercial and Industrial Food Waste Management [Final report]. Delaware Solid Waste Authority.
Reale-Levis, J. L., Barlaz, M. A., & Ranjithan, S. R. (2009). A Life-Cycle Analysis of Alternatives for the Management of Waste Hot Mix Asphalt [Final report]. Delaware Solid Waste Authority.
Reale-Levis, J. L., Barlaz, M. A., & Ranjithan, S. R. (2009). A Life-Cycle Analysis of Alternatives for the Management of Construction and Demolition Waste [Final report]. Delaware Solid Waste Authority.
Barlaz, M. A. (2009). Criteria to Terminate Post-Closure Monitoring at MSW landfills. Presented at the Vienna University of Technology, Vienna, Austria.
Barlaz, M. A. (2009). A Landfill Carbon Balance: Gas Production and Control, and Carbon Sequestration. Presented at the International Solid Waste Association (ISWA) Annual Meeting, Copenhagen, Denmark.
Barlaz, M. A. (2009). Solid Waste Management Research: from the Test Tube to the Field. Invited lectures presented at the Tonji University, Shanghai, China.
Ducoste, J. J. (2009). Analysis of Field Grease Interceptors. Presented at the Capacity, Management, Operation & Maintenance (CMOM) Conference, Austin, TX.
Ducoste, J. J. (2009). Assessment of Root Control Methods and Root Regrowth in a Pilot Scale Sanitary Sewer. Presented at the Capacity, Management, Operation & Maintenance (CMOM) Conference, Austin, TX.
Mast, R., Dawood, M., Rizkalla, S., & Zia, P. (2009). Flexural Design of Concrete Beams Reinforced with High Strength Steel Reinforcing Bars. ACI Structural Journal, 106(4), 551–552.
Rizkalla, S., Hassan, T., & Lucier, G. (2009). FRP Shear Transfer Mechanism for Precast, Prestressed Concrete Sandwich Load Bearing Panels. ACI Special Publication, 265, 603–626.
Kanta, L., Brumbelow, K., & Zechman, E. (2009). A Multi-Objective Evolutionary Computation Approach to Hazards Mitigation Design for Water Distribution Systems. World Environmental and Water Resources Congress 2009. Presented at the World Environmental and Water Resources Congress 2009. https://doi.org/10.1061/41036(342)43
Khedun, P., Damodaram, C., Giacomoni, M., Ryan, A., Holmes, H., Klein, R., … Stoleru, R. (2009). Improving Hydrologic Sustainability of Texas A&M University Campus. World Environmental and Water Resources Congress 2009. Presented at the World Environmental and Water Resources Congress 2009. https://doi.org/10.1061/41036(342)122
Giacomoni, M. H., & Zechman, E. M. (2009). Hydrologic Footprint Residence: A New Metric to Assess Hydrological Alterations Due to Urbanization. World Environmental and Water Resources Congress 2009. Presented at the World Environmental and Water Resources Congress 2009. https://doi.org/10.1061/41036(342)119
Gupta, A., Aggarwal, R., Gupta, P., Dutta, T., Narayan, R. J., & Narayan, J. (2009). Semiconductor to metal transition characteristics of VO2 thin films grown epitaxially on Si (001). Applied Physics Letters, 95(11), 111915. https://doi.org/10.1063/1.3232241
Pour-Ghaz, M., Burkan Isgor, O., & Ghods, P. (2009). The effect of temperature on the corrosion of steel in concrete. Part 2: Model verification and parametric study. Corrosion Science, 51(2), 426–433. https://doi.org/10.1016/j.corsci.2008.10.036
Pelletier, J., Mitasova, H., Overton, M., & Harmon, R. (2009). The Effects of Interdune Vegetation Changes on Eolian Dune Field Evolution: a numerical modeling case study at Jockey's Ridge, North Carolina, USA. Earth Surface Processes and Landforms, 34(9), 1245–1254. https://doi.org/http://doi.org/10.1002/esp.1809
Ewing, L., Stauble, D., Work, P., Edge, B., Loeffler, M., Kaihatu, J., … Gregory, G. (2009). Field investigation of Hurricane Ike impacts to the upper Texas coast. Shore and Beach, 77(2).
Arumugam, S. (2009, July 19). Climate-informed Uncertainty Analyses for Integrated River Basin Management. Presented at the US-Korea Conference, Raleigh, NC.
Arumugam, S. (2009, December). Role of Climate Variability and Change in Improving River Basin Management. Presented at the Indian Institute of Technology, Madras, Chennai, India.
Sadri, A., Staley, B. F., Reyes, F., & Barlaz, M. A. (2009). Characterization of Biological Activity in Refuse Samples Excavated from the Waimanalo Gulch Sanitary Landfill. Waste Management of Hawaii.
Brown, C., Conrad, E., Sankarasubramanian, A., Someshwar, S., & Elazegui, D. (2009). The use of seasonal climate forecasts within a shared reservoir system: The case of Angat reservoir, the Philippines. In F. Ludwig, P. Kabat, H. van Schaik, & M. van der Valk (Eds.), Climate Change Adaptation in the Water Sector. London: Earthscan.
Kim, Y. R., Underwood, B. S., Chehab, G. R., Daniel, J. S., Lee, H. J., & Yun, T. Y. (2009). VEPCD Modeling of Asphalt Concrete with Growing Damage. In Y. R. Kim (Ed.), Modeling of Asphalt Concrete (pp. 163–203). Reston, VA: ASCE Press/McGraw Hill.
Petersen, R. B., Masia, M. J., & Seracino, R. (2009). Bond Behavior of Near-Surface Mounted FRP Strips Bonded to Modern Clay Brick Masonry Prisms: Influence of Strip Orientation and Compression Perpendicular to the Strip. Journal of Composites for Construction, 13(3), 169–178. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000002
Evans, T. M., Mojarrad, H., Cunningham, C., & Tayebali, A. A. (2009). Grain Size Distribution Effects in 2D Discrete Numerical Experiments. Contemporary Topics in In Situ Testing, Analysis, and Reliability of Foundations. Presented at the International Foundation Congress and Equipment Expo 2009. https://doi.org/10.1061/41022(336)8
Cable, J. K., Jaselskis, E. J., Walters, R. C., Li, L., & Bauer, C. R. (2009). Stringless Portland Cement Concrete Paving. Journal of Construction Engineering and Management, 135(11), 1253–1260. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000083
Yeh, P.-H., Chang, K.-A., Henriksen, J., Edge, B., Chang, P., Silver, A., & Vargas, A. (2009). Large-scale laboratory experiment on erosion of sand beds by moving circular vertical jets. Ocean Engineering, 36(3-4), 248–255. https://doi.org/10.1016/j.oceaneng.2008.11.006
Pour-Ghaz, M., Isgor, O. B., & Ghods, P. (2009). Quantitative Interpretation of Half-Cell Potential Measurements in Concrete Structures. Journal of Materials in Civil Engineering, 21(9), 467–475. https://doi.org/10.1061/(asce)0899-1561(2009)21:9(467)
Pour-Ghaz, M., Isgor, O. B., & Ghods, P. (2009). The effect of temperature on the corrosion of steel in concrete. Part 1: Simulated polarization resistance tests and model development. Corrosion Science, 51(2), 415–425. https://doi.org/10.1016/j.corsci.2008.10.034
Johnson, J., & Chertow, M. (2009). Climate Stabilization Wedges in Action: A Systems Approach to Energy Sustainability for Hawaii Island. Environmental Science & Technology, 43(7), 2234–2240. https://doi.org/10.1021/es801700a
Call, D. F., Merrill, M. D., & Logan, B. E. (2009). High Surface Area Stainless Steel Brushes as Cathodes in Microbial Electrolysis Cells. Environmental Science & Technology, 43(6), 2179–2183. https://doi.org/10.1021/es803074x
Cheng, S., Xing, D., Call, D. F., & Logan, B. E. (2009). Direct Biological Conversion of Electrical Current into Methane by Electromethanogenesis. Environmental Science & Technology, 43(10), 3953–3958. https://doi.org/10.1021/es803531g
Call, D. F., Wagner, R. C., & Logan, B. E. (2009). Hydrogen Production by Geobacter Species and a Mixed Consortium in a Microbial Electrolysis Cell. Applied and Environmental Microbiology, 75(24), 7579–7587. https://doi.org/10.1128/aem.01760-09
Jimenez, J. L., Canagaratna, M. R., Donahue, N. M., Prevot, A. S. H., Zhang, Q., Kroll, J. H., … Worsnop, D. R. (2009). Evolution of Organic Aerosols in the Atmosphere. Science, 326(5959), 1525–1529. https://doi.org/10.1126/science.1180353
Grieshop, A. P., Reynolds, C. C. O., Kandlikar, M., & Dowlatabadi, H. (2009). A black-carbon mitigation wedge. Nature Geoscience, 2(8), 533–534. https://doi.org/10.1038/ngeo595
Grieshop, A. P., Miracolo, M. A., Donahue, N. M., & Robinson, A. L. (2009). Constraining the Volatility Distribution and Gas-Particle Partitioning of Combustion Aerosols Using Isothermal Dilution and Thermodenuder Measurements. Environmental Science & Technology, 43(13), 4750–4756. https://doi.org/10.1021/es8032378
Grieshop, A. P., Logue, J. M., Donahue, N. M., & Robinson, A. L. (2009). Laboratory investigation of photochemical oxidation of organic aerosol from wood fires 1: measurement and simulation of organic aerosol evolution. Atmospheric Chemistry and Physics, 9(4), 1263–1277. https://doi.org/10.5194/acp-9-1263-2009
Grieshop, A. P., Donahue, N. M., & Robinson, A. L. (2009). Laboratory investigation of photochemical oxidation of organic aerosol from wood fires 2: analysis of aerosol mass spectrometer data. Atmospheric Chemistry and Physics, 9(6), 2227–2240. https://doi.org/10.5194/acp-9-2227-2009
Medina, J. C., Benekohal, R. F., Hajbabaie, A., Wang, M.-H., & Chitturi, M. V. (2009). Downstream effects of speed photo-radar enforcement and other speed reduction treatments on work zones. In Transportation Research Record (pp. 24–33). https://doi.org/10.3141/2107-03
Benekohal, R. F., Wang, M.-H., Chitturi, M. V., Hajbabaie, A., & Medina, J. C. (2009). Speed photo-radar enforcement and Its effects on speed in work zones. In Transportation Research Record (pp. 89–97). https://doi.org/10.3141/2096-12
Hajbabaie, A., & Benekohal, R. F. (2009). Evolution strategies compared to genetic algorithms in finding optimal signal timing for oversaturated transportation network. IJCCI 2009 - International Joint Conference on Computational Intelligence, Proceedings, 298–301. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-77955445784&partnerID=MN8TOARS
Kumar, J., Brill, E. D., Mahinthakumar, G., & Ranjithan, R. (2009). Characterizing Reactive Contaminant Sources in a Water Distribution System. World Environmental and Water Resources Congress 2009. Presented at the World Environmental and Water Resources Congress 2009. https://doi.org/10.1061/41036(342)65
Liu, L., Brill, E. D., Mahinthakumar, G. (K., & Ranjithan, S. R. (2009). A Hybrid Heuristic Search Approach for Contaminant Source Characterization. World Environmental and Water Resources Congress 2009. Presented at the World Environmental and Water Resources Congress 2009. https://doi.org/10.1061/41036(342)63
Alpert, S. M., & Ducoste, J. J. (2009). A CFD modeling protocol for simulating the UV/H2O2 advanced oxidation process. Water Quality Technology Conference and Exposition 2009, 1795–1816. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84873492275&partnerID=MN8TOARS
Benekohal, R. F., Wang, M.-H., Chitturi, M. V., Hajbabaie, A., & Medina, J. C. (2009). Speed Photo--Radar Enforcement and Its Effects on Speed in Work Zones. Transportation Research Record, 2096(1), 89–97.
Medina, J. C., Benekohal, R. F., Hajbabaie, A., Wang, M.-H., & Chitturi, M. V. (2009). Downstream Effects of Speed Photo--Radar Enforcement and Other Speed Reduction Treatments on Work Zones. Transportation Research Record, 2107(1), 24–33.
Liu, X., Frey, H. C., Cao, Y., & Deshpande, B. (2009). Modeling of in-vehicle PM2.5 exposure using the stochastic human exposure and dose simulation model. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 2, 1087–1100. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-77952286694&partnerID=MN8TOARS
Frey, H. C., Choi, H.-W., & Kim, K. (2009). Measurement of the energy use and emissions of passenger rail locomotives using a portable emission measurement system. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 2, 1145–1157. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-77952268050&partnerID=MN8TOARS
Pang, S.-H., Frey, H. C., & Rasdorf, W. J. (2009). Life Cycle Inventory Energy Consumption and Emissions for Biodiesel versus Petroleum Diesel Fueled Construction Vehicles. Environmental Science & Technology, 43(16), 6398–6405. https://doi.org/10.1021/es802916u
Frey, H. C., Choi, H.-W., Pritchard, E., & Lawrence, J. (2009). In-use measurement of the activity, energy use, and emissions of a plug-in hybrid electric vehicle. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 2, 1127–1144. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-77952244297&partnerID=MN8TOARS
Graver, B. M., & Frey, H. C. (2009). Estimation of air carrier emissions at Raleigh-Durham international airport. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 4, 2502–2516. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-77952383333&partnerID=MN8TOARS
Frey, H. C., & Hubbell, B. (2009). A risk-based assessment and management framework for multipollutant air quality. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 2, 1068–1080. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-77952278636&partnerID=MN8TOARS
Gulez, G., & Los Reyes, F. L. (2009). Multiple approaches to assess filamentous bacterial growth in activated sludge under different carbon source conditions. J Appl Microbiol, 106(2), 682–691. https://doi.org/JAM4049 [pii]
10.1111/j.1365-2672.2008.04049.x
Kim, Y. R., Underwood, B. S., Chehab, G. R., Daniel, J. S., Lee, H. J., & Yun, Y. R. (2009). Chapter 7. VEPCD Modeling of Asphalt Concrete with Growing Damage. In Modeling of Asphalt Concrete. New York :McGraw-Hill.
Sakhaei Far, M. S., Underwood, B. S., Ranjithan, S. R., Krim, Y. R., & Jackson, N. (2009). The application of artificial neural networks for estimating the dynamic modulus of asphalt concrete. Transportation Research Record, 173–186.
Underwood, B. S., Kim, Y. R., Savadatti, S., Thirunavukkarasu, S., & Guddati, M. N. (2009). Simplified fatigue performance modeling of ALF pavements using VECD+3-D finite element modeling. 7th International RILEM Symposium on Advanced Testing and Characterization of Bituminous Materials.
Underwood. B.S., K., Y.R., S., S. Thirunavukkarasu, S., & M.N., G. (2009). Response and fatigue performance modeling of ALF pavements using 3-D finite element analysis and a simplified viscoelastic continuum damage model. Journal of the Association of Asphalt Paving Technologists, 829–868.
Underwood, B. S., & Kim, Y. R. (2009). Asphalt pavement response and fatigue performance prediction with viscoelastic continuum damage modeling approach. 2009 Pavement Prediction Symposium: Validation of Predictive Models Using Full-Scale and Field Pavement Performance.
Underwood, B. S., Hou, E. T., & Kim, Y. R. (2009). Application of simplified VECD modeling to the fatigue prediction of asphalt concrete mixtures. 7th International RILEM Symposium on Advanced Testing and Characterization of Bituminous Materials.
Underwood, B. S., & Kim, Y. R. (2009). Analytical techniques for determining the endurance limit of hot mix asphalt concrete. 2nd International Conference on Perpetual Pavements.
Bobko, C. P., Ortega, J. A., & Ulm, F.-J. (2009, December). Comment on "Elastic modulus and hardness of muscovite and rectorite determined by nanoindentation" by G. Zhang, Z. Wei and RE Ferrell [Applied Clay Science 43 (2009) 271-281]. APPLIED CLAY SCIENCE, Vol. 46, pp. 425–428. https://doi.org/10.1016/j.clay.2009.08.008
Harris, E. A., Rasdorf, W., & Hummer, J. E. (2009). A Control Sign Facility Design to Meet the New FHWA Minimum Sign Retroreflectivity Standards. PUBLIC WORKS MANAGEMENT & POLICY, 14(2), 174–194. https://doi.org/10.1177/1087724x09350226
Rasdorf, W. J., Zhang, G., & Hummer, J. E. (2009). The Impact of Directionality on Paint Pavement Marking Retroreflectivity. PUBLIC WORKS MANAGEMENT & POLICY, 13(3), 265–277. https://doi.org/10.1177/1087724x08330824
Pradhan, A., & Rasdorf, W. (2009). GIS and LiDAR use for identification of potential road hazard locations. In W. J. O. B. Carlos H. Caldas (Ed.), Computing in civil engineering : proceedings of the 2009 ASCE International Workshop on Computing in Civil Engineering : June 24-27, 2009, Austin, Texas. https://doi.org/10.1061/41052(346)13
Lewis, P., Frey, H. C., & Rasdorf, W. (2009). Development and Use of Emissions Inventories for Construction Vehicles. TRANSPORTATION RESEARCH RECORD, (2123), 46–53. https://doi.org/10.3141/2123-06
Far, M. S. S., Underwood, B. S., Ranjithan, S. R., Kim, Y. R., & Jackson, N. (2009). Application of Artificial Neural Networks for Estimating Dynamic Modulus of Asphalt Concrete. Transportation Research Record: Journal of the Transportation Research Board, 2127(1), 173–186. https://doi.org/10.3141/2127-20
Lee, J. S., & Kim, Y. R. (2009). Performance-Based Uniformity Coefficient of Chip Seal Aggregate. TRANSPORTATION RESEARCH RECORD, (2108), 53–60. https://doi.org/10.3141/2108-06
Choi, H.-W., & Frey, H. C. (2009). Light duty gasoline vehicle emission factors at high transient and constant speeds for short road segments. TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT, 14(8), 610–614. https://doi.org/10.1016/j.trd.2009.09.001
Frey, H. C., & Kim, K. (2009). In-use measurement of the activity, fuel use, and emissions of eight cement mixer trucks operated on each of petroleum diesel and soy-based B20 biodiesel. TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT, 14(8), 585–592. https://doi.org/10.1016/j.trd.2009.08.004
Sankarasubramanian, A., Lall, U., Souza Filho, F. A., & Sharma, A. (2009). Improved water allocation utilizing probabilistic climate forecasts: Short-term water contracts in a risk management framework. Water Resources Research, 45(11). https://doi.org/10.1029/2009wr007821
Eom, J. K., Stone, J. R., & Ghosh, S. K. (2009). Daily Activity Patterns of University Students. JOURNAL OF URBAN PLANNING AND DEVELOPMENT, 135(4), 141–149. https://doi.org/10.1061/(ASCE)UP.1943-5444.0000015
Barlaz, M. A., Chanton, J. P., & Green, R. B. (2009). Controls on Landfill Gas Collection Efficiency: Instantaneous and Lifetime Performance. JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION, 59(12), 1399–1404. https://doi.org/10.3155/1047-3289.59.12.1399
Willis, C. R., Yang, Q., Seracino, R., & Griffith, M. C. (2009). Bond behaviour of FRP-to-clay brick masonry joints. ENGINEERING STRUCTURES, 31(11), 2580–2587. https://doi.org/10.1016/j.engstruct.2009.06.006
Scott, S. L., Engelmann, C., Vallee, G. R., Naughton, T., Tikotekar, A., Ostrouchov, G., … Varma, J. (2009, April). A Tunable Holistic Resiliency Approach for High-Performance Computing Systems. ACM SIGPLAN NOTICES, Vol. 44, pp. 305–306. https://doi.org/10.1145/1594835.1504227
Schroeder, B. J., Rouphail, N. M., & Hughes, R. G. (2009). Working concept of accessibility performance measures for usability of crosswalks by pedestrians with vision impairments. Transportation Research Record, (2140), 103–110.
Guddati, M. N., & Thirunavukkarasu, S. (2009). Phonon absorbing boundary conditions for molecular dynamics. JOURNAL OF COMPUTATIONAL PHYSICS, 228(21), 8112–8134. https://doi.org/10.1016/j.jcp.2009.07.033
Hu, H., Williams, B., Rouphail, N. M., Khattak, A. J., & Zhou, X. (2009). Modeling the Role of Transportation Information in Mitigating Major Capacity Reductions in a Regional Network. Transportation Research Record, (2138), 75–84. https://doi.org/10.3141/2138-11
Rizkalla, S., Zia, P., Mirmiran, A., Russell, H. G., & Mast, R. (2009). Proposal for concrete compressive strength up to 18 ksi (124 Mpa) for bridge design. Transportation Research Record, (2131), 59–67.
Krishna, S., Hassan, T., Ben Naceur, I., Sai, K., & Cailletaud, G. (2009). Macro versus micro-scale constitutive models in simulating proportional and nonproportional cyclic and ratcheting responses of stainless steel 304. INTERNATIONAL JOURNAL OF PLASTICITY, 25(10), 1910–1949. https://doi.org/10.1016/j.ijplas.2008.12.009
Dawood, M., Guddati, M., & Rizkalla, S. (2009). Effective Splices for a Carbon Fiber-Reinforced Polymer Strengthening System for Steel Bridges and Structures. TRANSPORTATION RESEARCH RECORD, (2131), 125–133. https://doi.org/10.3141/2131-12
Rosenfeldt, E. J., Baeza, C., & Knappe, D. R. U. (2009). Effect of Free Chlorine Application on Microbial Quality of Drinking Water in Chloraminated Distribution Systems. Journal AWWA, 101(10), 60–70. https://doi.org/10.1002/j.1551-8833.2009.tb09974.x
Kiesel, S., Peters, K., Hassan, T., & Kowalsky, M. (2009, March). Calibration of a single-mode polymer optical fiber large-strain sensor. MEASUREMENT SCIENCE AND TECHNOLOGY, Vol. 20. https://doi.org/10.1088/0957-0233/20/3/034016
Ahn, J., Biscontin, G., & Roesset, J. M. (2009). Wave propagation velocity under a vertically vibrated surface foundation. INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 33(9), 1153–1167. https://doi.org/10.1002/nag.759
Teuten, E. L., Saquing, J. M., Knappe, D. R. U., Barlaz, M. A., Jonsson, S., Bjorn, A., … Boonyatumanond, R. (2009). [Review of Transport and release of chemicals from plastics to the environment and to wildlife]. Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences, 364(1526), 2027–2045.
Montejo, L. A., Kowalsky, M. J., & Hassan, T. (2009). Seismic behavior of shear-dominated reinforced concrete columns at low temperatures. ACI Structural Journal, 106(4), 445–454. https://doi.org/10.14359/56610
Zhai, H., Frey, H. C., Rouphail, N. M., Goncalves, G. A., & Farias, T. L. (2009). Comparison of Flexible Fuel Vehicle and Life-Cycle Fuel Consumption and Emissions of Selected Pollutants and Greenhouse Gases for Ethanol 85 Versus Gasoline. JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION, 59(8), 912–924. https://doi.org/10.3155/1047-3289.59.8.912
Seliem, H. M., Hosny, A., Rizkalla, S., Zia, P., Briggs, M., Miller, S., … Jirsa, J. O. (2009). Bond characteristics of ASTM A1035 steel reinforcing bars. ACI Structural Journal, 106(4), 530–539.
Cai, H., & Rasdorf, W. (2009). Accuracy Evaluation and Sensitivity Analysis of Estimating 3D Road Centerline Length using Lidar and NED. PHOTOGRAMMETRIC ENGINEERING AND REMOTE SENSING, 75(6), 657–665. https://doi.org/10.14358/PERS.75.6.657
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009). Accumulation and fragmentation of plastic debris in global environments. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES, 364(1526), 1985–1998. https://doi.org/10.1098/rstb.2008.0205
Sankarasubramanian, A., Lall, U., Devineni, N., & Espinueva, S. (2009). The Role of Monthly Updated Climate Forecasts in Improving Intraseasonal Water Allocation. JOURNAL OF APPLIED METEOROLOGY AND CLIMATOLOGY, 48(7), 1464–1482. https://doi.org/10.1175/2009JAMC2122.1
Choudhury, P., & Sankarasubramanian, A. (2009). River Flood Forecasting Using Complementary Muskingum Rating Equations. JOURNAL OF HYDROLOGIC ENGINEERING, 14(7), 745–751. https://doi.org/10.1061/(ASCE)HE.1943-5584.0000046
Lewis, P., Rasdorf, W., Frey, H. C., Pang, S.-H., & Kim, K. (2009). Requirements and Incentives for Reducing Construction Vehicle Emissions and Comparison of Nonroad Diesel Engine Emissions Data Sources. JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT-ASCE, 135(5), 341–351. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000008
Mokhtari, A., & Jaykus, L.-A. (2009). Quantitative exposure model for the transmission of norovirus in retail food preparation. INTERNATIONAL JOURNAL OF FOOD MICROBIOLOGY, 133(1-2), 38–47. https://doi.org/10.1016/j.ijfoodmicro.2009.04.021
Frost, J. D., & Evans, T. M. (2009). Membrane Effects in Biaxial Compression Tests. JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING, 135(7), 986–991. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000011
Barlaz, M. A. (2009, May 1). Landfill gas recovery. https://doi.org/10.1021/es9004174
Vidot-Vega, A. L., Possiel, B., Robinson, B., Kowalsky, M. J., & Gabr, M. A. (2009). Evaluation of Rotational Stiffness of Elastomeric Bearing Pad-Anchor Bolt Connections on Deep Foundation Bents. JOURNAL OF BRIDGE ENGINEERING, 14(6), 487–495. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000010
Ulker, M. B. C., Rahman, M. S., & Jeng, D.-S. (2009). Wave-induced response of seabed: Various formulations and their applicability. APPLIED OCEAN RESEARCH, 31(1), 12–24. https://doi.org/10.1016/j.apor.2009.03.003
Pelletier, J. D., Mitasova, H., Harmon, R. S., & Overton, M. (2009). The effects of interdune vegetation changes on eolian dune field evolution: a numerical-modeling case study at Jockey's Ridge, North Carolina, USA. EARTH SURFACE PROCESSES AND LANDFORMS, 34(9), 1245–1254. https://doi.org/10.1002/esp.1809
Logan, A., Choi, W., Mirmiran, A., Rizkalla, S., & Zia, P. (2009). Short-term mechanical properties of high-strength concrete. ACI Materials Journal, 106(5), 413–418.
Frey, H. C., Zhai, H., & Rouphail, N. M. (2009). Regional On-Road Vehicle Running Emissions Modeling and Evaluation for Conventional and Alternative Vehicle Technologies. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 43(21), 8449–8455. https://doi.org/10.1021/es900535s
Ahn, J., Cote, B. M., Robinson, B., Gabr, M. A., & Borden, R. H. (2009). Inverse Analysis of Plate Load Tests to Assess Subgrade Resilient Modulus. TRANSPORTATION RESEARCH RECORD, 2101(2101), 110–117. https://doi.org/10.3141/2101-13
Underwood, B. S., & Kim, Y. R. (2009). Determination of the appropriate representative elastic modulus for asphalt concrete. International Journal of Pavement Engineering, 10(2), 77–86. https://doi.org/10.1080/10298430701827668
Ling, F. Y. Y., Liu, M., & Woo, Y. C. (2009). Construction fatalities in Singapore. International Journal of Project Management, 27(7), 717–726. https://doi.org/10.1016/j.ijproman.2008.11.002
Mun, S., & Kim, Y. R. (2009). Backcalculation of subgrade stiffness under rubblised PCC slabs using multilevel FWD loads. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 10(1), 9–18. https://doi.org/10.1080/10298430701827650
Rossner, A., Snyder, S. A., & Knappe, D. R. U. (2009). Removal of emerging contaminants of concern by alternative adsorbents. WATER RESEARCH, 43(15), 3787–3796. https://doi.org/10.1016/j.watres.2009.06.009
Bogen, K. T., Cullen, A. C., Frey, H. C., & Price, P. S. (2009). [Review of Probabilistic Exposure Analysis for Chemical Risk Characterization]. TOXICOLOGICAL SCIENCES, 109(1), 4–17. https://doi.org/10.1093/toxsci/kfp036
Bhandari, A., Xu, F., Koch, D. E., & Hunter, R. P. (2009). Peroxidase-Mediated Polymerization of 1-Naphthol: Impact of Solution pH and Ionic Strength. JOURNAL OF ENVIRONMENTAL QUALITY, 38(5), 2034–2040. https://doi.org/10.2134/jeq2008.0426
Sitzabee, W. E., Hummer, J. E., & Rasdorf, W. (2009). Pavement marking degradation modeling and analysis. Journal of Infrastructure Systems, 15(3), 190–199. https://doi.org/10.1061/(ASCE)1076-0342(2009)15:3(190)
Pearson, J. D., Zikry, M. A., & Wahl, K. J. (2009). Microstructural modeling of adaptive nanocomposite coatings for durability and wear. WEAR, 266(9-10), 1003–1012. https://doi.org/10.1016/j.wear.2009.02.004
Gupta, A., Narayan, J., & Kumar, D. (2009). Magnetic Properties of Self-Assembled Ni Nanoparticles in Two Dimensional Structures. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 9(6), 3993–3996. https://doi.org/10.1166/jnn.2009.214
Zechman, E. M., & Ranjithan, S. R. (2009). Evolutionary Computation-Based Methods for Characterizing Contaminant Sources in a Water Distribution System. Journal of Water Resources Planning and Management, 135(5), 334–343. https://doi.org/10.1061/(ASCE)0733-9496(2009)135:5(334)
Vankayala, P., Sankarasubramanian, A., Ranjithan, S. R., & Mahinthakumar, G. (2009). Contaminant Source Identification in Water Distribution Networks Under Conditions of Demand Uncertainty. ENVIRONMENTAL FORENSICS, 10(3), 253–263. https://doi.org/10.1080/15275920903140486
Staley, B. F., & Barlaz, M. A. (2009). Composition of Municipal Solid Waste in the United States and Implications for Carbon Sequestration and Methane Yield. JOURNAL OF ENVIRONMENTAL ENGINEERING, 135(10), 901–909. https://doi.org/10.1061/(asce)ee.1943-7870.0000032
Petersen, R. B., Masia, M. J., & Seracino, R. (2009). Bond behavior of near-surface mounted frp strips bonded to modern clay brick masonry prisms: Influence of strip orientation and compression perpendicular to the strip. Journal of Composites for Construction, 13(3), 169–178. https://doi.org/10.1061/(ASCE)1090-0268(2009)13:3(169)
Lanier, B., Schnerch, D., & Rizkalla, S. (2009, October). Behavior of steel monopoles strengthened with high-modulus CFRP materials. THIN-WALLED STRUCTURES, Vol. 47, pp. 1037–1047. https://doi.org/10.1016/j.tws.2008.10.010
Mirghani, B. Y., Mahinthakumar, K. G., Tryby, M. E., Ranjithan, R. S., & Zechman, E. M. (2009). A parallel evolutionary strategy based simulation–optimization approach for solving groundwater source identification problems. Advances in Water Resources, 32(9), 1373–1385. https://doi.org/10.1016/j.advwatres.2009.06.001
Evans, T. M., Chall, S., Zhao, X. L., & Rhyne, T. M. (2009). Visualization and analysis of microstructure in three-dimensional discrete numerical models. Journal of Computing in Civil Engineering, 23(5), 277–287. https://doi.org/10.1061/(ASCE)0887-3801(2009)23:5(277)
Hossain, M. S., Gabr, M. A., & Asce, F. (2009). The effect of shredding and test apparatus size on compressibility and strength parameters of degraded municipal solid waste. WASTE MANAGEMENT, 29(9), 2417–2424. https://doi.org/10.1016/j.wasman.2009.03.024
Frey, H. C., & Kuo, P.-Y. (2009). Real-World Energy Use and Emission Rates for Idling Long-Haul Trucks and Selected Idle Reduction Technologies. JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION, 59(7), 857–864. https://doi.org/10.3155/1047-3289.59.7.857
Pang, S. H., Frey, H. C., & Rasdorf, W. J. (2009). Life cycle inventory energy consumption and emissions for biodiesel versus petroleum diesel fueled construction vehicles. Environmental Science & Technology, 43(16), 6398–6405. https://doi.org/10.1021/os802916u
Frey, H. C., Kuo, P.-Y., & Villa, C. (2009). Effects of Idle Reduction Technologies on Real World Fuel Use and Exhaust Emissions of Idling Long-Haul Trucks. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 43(17), 6875–6881. https://doi.org/10.1021/es900186e
Sitzabee, W. E., Rasdorf, W., Hummer, J. E., & Devine, H. A. (2009). Data integration of pavement markings: A case in transportation asset management. Journal of Computing in Civil Engineering, 23(5), 288–298. https://doi.org/10.1061/(ASCE)0887-3801(2009)23:5(288)
Pearson, J. D., Zikry, M. A., & Wahl, K. (2009, June 15). Computational design of thin-film nanocomposite coatings for optimized stress and velocity accommodation response. WEAR, Vol. 267, pp. 1137–1145. https://doi.org/10.1016/j.wear.2008.11.027
Coelho, M. C., Farias, T. L., & Rouphail, N. M. (2009). A Numerical Tool for Estimating Pollutant Emissions and Vehicles Performance in Traffic Interruptions on Urban Corridors. INTERNATIONAL JOURNAL OF SUSTAINABLE TRANSPORTATION, 3(4), 246–262. https://doi.org/10.1080/15568310802175641
Ulker, M. B. C., & Rahman, M. S. (2009). Response of saturated and nearly saturated porous media: Different formulations and their applicability. INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 33(5), 633–664. https://doi.org/10.1002/nag.739
Putra, H. D., Ngothai, Y., Ozbakkaloglu, T., & Seracino, R. (2009). Mineral Filler Reinforcement for Commingled Recycled-Plastic Materials. JOURNAL OF APPLIED POLYMER SCIENCE, 112(6), 3470–3481. https://doi.org/10.1002/app.29861
Zhao, Xi, Alpert, S. M., & Ducoste, J. J. (2009). Assessing the Impact of Upstream Hydraulics on the Dose Distribution of Ultraviolet Reactors Using Fluorescence Microspheres and Computational Fluid Dynamics. ENVIRONMENTAL ENGINEERING SCIENCE, 26(5), 947–959. https://doi.org/10.1089/ees.2008.0139
Kaplan, P. O., Ranjithan, S. R., & Barlaz, M. A. (2009). Use of Life-Cycle Analysis To Support Solid Waste Management Planning for Delaware. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 43(5), 1264–1270. https://doi.org/10.1021/es8018447
Rosenboom, O., Walter, C., & Rizkalla, S. (2009). Strengthening of prestressed concrete girders with composites: Installation, design and inspection. CONSTRUCTION AND BUILDING MATERIALS, 23(4), 1495–1507. https://doi.org/10.1016/j.conbuildmat.2007.11.010
Mitasova, H., Overton, M. F., Recalde, J. J., Bernstein, D. J., & Freeman, C. W. (2009). Raster-Based Analysis of Coastal Terrain Dynamics from Multitemporal Lidar Data. JOURNAL OF COASTAL RESEARCH, 25(2), 507–514. https://doi.org/10.2112/07-0976.1
Clayton, M. H., & Borden, R. C. (2009). Numerical Modeling of Emulsified Oil Distribution in Heterogeneous Aquifers. GROUND WATER, 47(2), 246–258. https://doi.org/10.1111/j.1745-6584.2008.00531.x
Vanajakshi, L. D., Williams, B., & Rilett, L. R. (2009). Improved flow-based travel time estimation method from point detector data for freeways. Journal of Transportation Engineering, 135(1), 26–36. https://doi.org/10.1061/(ASCE)0733-947X(2009)135:1(26)
Golembesky, K., Sankarasubramanian, A., & Devineni, N. (2009). Improved drought management of Falls Lake Reservoir: Role of multimodel streamflow forecasts in setting up restrictions. Journal of Water Resources Planning and Management, 135(3), 188–197. https://doi.org/10.1061/(ASCE)0733-9496(2009)135:3(188)
Hatzinger, P. B., Bohlke, J. K., Sturchio, N. C., Gu, B., Heraty, L. J., & Borden, R. C. (2009). Fractionation of stable isotopes in perchlorate and nitrate during in situ biodegradation in a sandy aquifer. ENVIRONMENTAL CHEMISTRY, 6(1), 44–52. https://doi.org/10.1071/EN09008
Willis, C. R., Yang, Q., Seracino, R., & Griffith, M. C. (2009). Damaged masonry walls in two-way bending retrofitted with vertical FRP strips. Construction & Building Materials, 23(4), 1591–1604. https://doi.org/10.1016/j.conbuildmat.2007.09.007
Nopens, I., Briesen, H., & Ducoste, J. (2009, February 16). Celebrating a milestone in Population Balance Modeling. CHEMICAL ENGINEERING SCIENCE, Vol. 64, pp. 627–627. https://doi.org/10.1016/j.ces.2009.01.004
Sumpter, M. S., Rizkalla, S. H., & Zia, P. (2009). Behavior of high-performance steel as shear reinforcement for concrete beams. ACI Structural Journal, 106(2), 171–177.
Ahn, J., Biscontin, G., & Roesset, J. M. (2009). Wave propagation in nonlinear one-dimensional soil model. INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 33(4), 487–509. https://doi.org/10.1002/nag.724
Immaneni, V. P. K., Hummer, J. E., Rasdorf, W. J., Harris, E. A., & Yeom, C. (2009). Synthesis of sign deterioration rates across the United States. Journal of Transportation Engineering, 135(3), 94–103. https://doi.org/10.1061/(ASCE)0733-947X(2009)135:3(94)
Montejo, L. A., Kowalsky, M. J., & Hassan, T. (2009). Seismic behavior of flexural dominated reinforced concrete bridge columns at low temperatures. Journal of Cold Regions Engineering, 23(1), 18–42. https://doi.org/10.1061/(ASCE)0887-381X(2009)23:1(18)
Rasdorf, W., Hummer, J. E., Harris, E. A., & Sitzabee, W. E. (2009). IT Issues for the management of high-quantity, low-cost assets. Journal of Computing in Civil Engineering, 23(2), 91–99. https://doi.org/10.1061/(asce)0887-3801(2009)23:2(91)
Wu, Z., Mirmiran, A., Zhu, Z., & Swanson, J. (2009). Flexural behavior of prestressed FRP tubular bridge deck. COMPOSITES PART B-ENGINEERING, 40(2), 125–133. https://doi.org/10.1016/j.compositesb.2008.11.001
Abdi, O., Wong, K. C., Hassan, T., Peters, K. J., & Kowalsky, M. J. (2009). Cleaving of solid single mode polymer optical fiber for strain sensor applications. OPTICS COMMUNICATIONS, 282(5), 856–861. https://doi.org/10.1016/j.optcom.2008.11.046
Kaplan, P. O., DeCarolis, J., & Thorneloe, S. (2009). Is It Better To Burn or Bury Waste for Clean Electricity Generation? Environmental Science & Technology, 43(6), 1711–1717. https://doi.org/10.1021/es802395e
Coelho, M. C., Frey, H. C., Rouphail, N. M., Zhai, H., & Pelkmans, L. (2009). Assessing methods for comparing emissions from gasoline and diesel light-duty vehicles based on microscale measurements. TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT, 14(2), 91–99. https://doi.org/10.1016/j.trd.2008.11.005
Oezkaynak, H., Frey, H. C., Burke, J., & Pinder, R. W. (2009). Analysis of coupled model uncertainties in source-to-dose modeling of human exposures to ambient air pollution: A PM2.5 case study. ATMOSPHERIC ENVIRONMENT, 43(9), 1641–1649. https://doi.org/10.1016/j.atmosenv.2008.12.008
Jin, X., Mahinthakumar, G. (K., Zechman, E. M., & Ranjithan, R. S. (2009). A genetic algorithm-based procedure for 3D source identification at the Borden emplacement site. Journal of Hydroinformatics, 11(1), 51–64. https://doi.org/10.2166/hydro.2009.002
Rasdorf, W., Hummer, J. E., Zhang, G., & Sitzabee, W. E. (2009). Pavement marking performance analysis. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.
Gulez, G., & Reyes, F. L., III. (2009). Multiple approaches to assess filamentous bacterial growth in activated sludge under different carbon source conditions. JOURNAL OF APPLIED MICROBIOLOGY, 106(2), 682–691. https://doi.org/10.1111/j.1365-2672.2008.04049.x