Civil, Construction and Environmental Engineering - 2017 Singh, S., & Frey, H. C. (2017). Procedure for measuring and comparing fuel use and gaseous emissions for gas-direct injection versus port fuel injection vehicles. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85039147517&partnerID=MN8TOARS Rastogi, N., & Frey, H. C. (2017). Procedure for evaluation of retrofitted scr-based emission control system for a passenger railroad locomotive. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85039160003&partnerID=MN8TOARS Frey, H. C. (2017). Identifying and transcending ideological barriers in the climate change public policy debate. Air and Waste Management Association, A and WMA - Finding Common Ground on Climate Change Mitigation and Adaptation, 2017-October, 8–17. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85052332630&partnerID=MN8TOARS Rice, J., & Westerhoff, P. (2017). High levels of endocrine pollutants in US streams during low flow due to insufficient wastewater dilution. Nature Geoscience, 10(8), 587–591. https://doi.org/10.1038/NGEO2984 Do, J., Montoya, B. M., & Gabr, M. A. (2017). Mechanical Behavior of Sands Treated by Microbially Induced Calcite Precipitation at Low Confining Stress. 19th International Conference on Soil Mechanics and Geotechnical Engineering. Presented at the 19th International Conference on Soil Mechanics and Geotechnical Engineering, Seoul, South Korea. Bennett, V., Nguyen, C., Abdoun, T., Helal, A., Gabr, M., Jones, C., … Dudas, J. (2017). Use of remote-sensing deformation monitoring for the assessment of levee section performance limit state. Proceeding of the 19th International conference on soil mechanics and geotechnical engineering. Presented at the 19th International conference on soil mechanics and geotechnical engineering, Seoul, Korea. Safavizadeh, S., Montoya, B. M., & Gabr, M. A. (2017). Effect of Microbial Induced Calcite Precipitation on Compressibility and Hydraulic Conductivity of Coal Fly Ash. Dam Safety 2017. Presented at the Dam Safety 2017, San Antonio, Texas. Ardebili, Z. A., Gabr, M. A., & Rahman, M. S. (2017). Effect of the Keying Angle on the Pullout Capacity of Suction Embedded Plate Anchor (SEPLA) in Clay. ISOPE-I-17-089, The International Society of Offshore and Polar Engineers. Presented at the ISOPE-I-17-089, The International Society of Offshore and Polar Engineers, San Francisco, California. Mousavi, H., Gabr, M. A., & Borden, R. H. (2017). Assessment of Subgrade Soils Stabilization Criteria. International Conference on Highway Pavements & Airfield Technology. Presented at the International Conference on Highway Pavements & Airfield Technology, Philadelphia, PA. Safavizadeh, S. S., Montoya, B. M., & Gabr, M. (2017). Effect of Bio-Cementation on Performance of Coal Ash Ponds. Proceedings from Dam Safety 2017, Association of State Dam Safety Officials (ASDSO). Presented at the Dam Safety 2017, Association of State Dam Safety Officials (ASDSO), San Antonio, Texas. Helal, A., Bennett, V., Gabr, M., Borden, R. H., & Abdoun, T. (2017). Monitoring and Modeling of Peat Decomposition in Sacramento Delta Levees. Presented at the Geotechnical Frontiers 2017. https://doi.org/10.1061/9780784480458.054 Wu, G., Wu, G., Zhang, Q., & Knappe, D. R. U. (2017). Study on adsorption process and mechanism of p-nitroaniline on bamboo charcoal. Chinese Journal of Environmental Engineering, 11(1), 251–259. https://doi.org/10.12030/j.cjee.201509119 Hafiz, F., De Queiroz, A. R., & Husain, I. (2017). Multi-stage stochastic optimization for a PV-storage hybrid unit in a household. 2017 IEEE Industry Applications Society Annual Meeting, IAS 2017, 2017-January, 1–7. https://doi.org/10.1109/IAS.2017.8101704 Xue, L., Xie, W., Wang, Y., & Wang, C. (2017). Characterizing Fatigue Failure Behavior of Modified Asphalt Binders from Linear Amplitude Sweep Test. DEStech Transactions on Materials Science and Engineering, 5(ictim). https://doi.org/10.12783/dtmse/ictim2017/9900 Song, T.-J., So, J., Lee, J., & Williams, B. M. (2017). Exploring Vehicle–Pedestrian Crash Severity Factors on the Basis of In-Car Black Box Recording Data. In Transportation Research Record (Vol. 2659, pp. 148–154). https://doi.org/10.3141/2659-16 Clark, H., McLaughlin, A. C., Williams, B., & Feng, J. (2017). Performance in takeover and characteristics of non-driving related tasks during highly automated driving in younger and older drivers. Proceedings of the Human Factors and Ergonomics Society, 2017-October, 37–41. https://doi.org/10.1177/1541931213601504 Collins, M. P., Bentz, E. C., Kuan, A., & Proestos, G. T. (2017). Detailing for Torsion Revisited. Denis Mitchell Symposium. Presented at the Denis Mitchell Symposium, Montreal, Quebec, Canada. Saha, P. K., Khlystov, A., & Grieshop, A. P. (2017, August 11). Supplementary material to "Downwind evolution of the volatility and mixing state of near-road aerosols near a US interstate highway" (Vol. 8). Vol. 8. https://doi.org/10.5194/acp-2017-690-supplement Grieshop, A. (2017, November 11). Review of Sato et al. (Vol. 11). Vol. 11. https://doi.org/10.5194/acp-2017-860-RC2 Saha, P. K., Khlystov, A., & Grieshop, A. P. (2017, August 11). Downwind evolution of the volatility and mixing state of near-road aerosols near a US interstate highway (Vol. 8). Vol. 8. https://doi.org/10.5194/acp-2017-690 Karam, A. L., Ducoste, J. J., & de los Reyes, F. L., III. (2017, June). Development of Photochemical Microsensors for Evaluating Light Distribution within Microalgal Photosynthetic Bioreactors. Presented at the Association of Environmental Engineering and Science Professors (AEESP) Conference, Ann Arbor, Michigan. Williams, C., Koryachko, A., Matthiadis, A., Muhammad, D., Brady, S. M., Ducoste, J., … Long, T. A. (2017, June). Integrative Dynamic Modeling Using Diverse Biological Datasets. Presented at the Crops In Silico Symposium and Workshop, University of Oxford, UK. Lai, Y. C., Karam, A., Ranjithan, R., Levis, J., de los Reyes, F. L., III, & Ducoste, J. (2017, June 18). Physiological responses of microalgae, Dunaliella viridis, during nitrogen–limited growth. Presented at the 7th International Conference on Biofuels, Biomass, and Bioproducts, Miami, FL. Karam, A., Lai, Y. C., Liu, J., Ranjithan, R., Levis, J., de los Reyes, F. L., III, & Ducoste, J. (2017, June 18). Quantifying Light Distributions within Microalgal Photosynthetic Bioreactors Using Novel Microsensors. Presented at the 7th International Conference on Biofuels, Biomass, and Bioproducts, Miami, FL. Ducoste, J. J. (2017). Holy Dish Pan Hands Batman, there are Soaps in the Sewers: Fats, Oil, and Grease Issues in Sewer Systems. Seminar presented at the University of South Florida, Tampa, FL. Ducoste, J. J. (2017). Drinking Water Treatment: What Happens from Source to Tap. Seminar presented at the St Augustine University, Raleigh, NC. Ducoste, J. J. (2017). Raising the Value of Water: A strategy for Greater Public Health Protection. Seminar presented at the Shaw University, Raleigh, NC. Sadler, M., Wischer, B., Gordon, J., Wilkerson, C., Tabor, C., Fredericks, D., & Ducoste, J. (2017, August 28). Unintended Consequences of a Local Fats, Oils, and Grease Limits Revisions: One Utilizity’s Experience with FOG. Horizons New Letter. Yuan, W., Frey, H. C., & Sun, Y. (2017). Quantification of transit train activity data for energy consumption estimation. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85039168169&partnerID=MN8TOARS Sardarmehni, M., Tahouni, N., & Panjeshahi, M. H. (2017). Benchmarking of energy saving potential and CO2 reduction in iranian compressor stations. Chemical Engineering Transactions, 61, 1387–1392. https://doi.org/10.3303/CET1761229 Sardarmehni, M., Tahouni, N., & Panjeshahi, M. H. (2017). Benchmarking of olefin plant cold-end for shaft work consumption, using process integration concepts. Energy, 127, 623–633. https://doi.org/10.1016/j.energy.2017.03.066 Saleh, N. F., Zalghout, A., Din, S. S. A., El-Khatib, A., & Saleh, K. (2017). An Experimental and Numerical Study of Hydronic Asphalt Pavements. Presented at the 16th Faculty of Engineering and Architecture Student and Alumni Conference, Beirut, Lebanon. Elwardany, M. D., Yousefi Rad, F., Castorena, C., & Kim, Y. R. (2017). Evaluation of asphalt mixture laboratory long-term ageing methods for performance testing and prediction. Road Materials and Pavement Design, 18(sup1), 28–61. https://doi.org/10.1080/14680629.2016.1266740 Levis, J. W., Weisbrod, A., Van Hoof, G., & Barlaz, M. A. (2017). A Review of the Environmental Releases from Uncontrolled Solid Waste Disposal Sites. Critical Reviews in Environmental Science and Technology, 47(12), 1003–1041. Barlaz, M. A. (2017). The Use of Landfills for the Long-Term Storage of Biogenic Organic Carbon. Presented at the National Academy of Sciences panel on Carbon Dioxide Removal and Reliable Sequestration. Barlaz, M. A. (2017). A Model to Describe Heat Accumulation at Municipal Solid Waste Landfills. Oral speech presented at the University of Toronto. Lang, J. R., Allred, B. M., Field, J. A., Levis, J. W., & Barlaz, M. A. (2017). National Inventory of Per- and Polyfluoroalkyl Substances (PFASs) in U.S. Municipal Landfill Leachate. Environmental Science & Technology, 51(4), 2197–2205. Barlaz, M. A. (2017). A Model to Describe Heat Generation and Accumulation in Municipal Solid Waste Landfills. Presented at the US EPA Workshop on Understanding Heat Generation at Municipal Solid Waste Landfills, Cincinnati, OH. Park, S., Pour-Ghaz, M., Castellano, L., & Barlaz, M. (2017). Why Do Waste Transfer Station Concrete Floors Deteriorate Prematurely? Presented at the Open Topic Paper Session, American Concrete Institute, Fall 2017 Convention, Anaheim, CA. Barlaz, M. A., Levis, J. W., & Roberson, J. (2017). Life Cycle Modeling to Support Waste Management Planning. Presented at the NC Solid Waste Association of North America Annual Meeting, Raleigh, NC. Wang, X., Huang, K., Wei, X., & Barlaz, M. A. (2017). What are the Best Values for Carbon Dissimilation Factors for Landfilled Harvested Wood Products? Presented at the 16th International Waste Management and Landfill Symposium, S. Margherita di Pula (CA), Italy. Lee, E., Reyes, F., & Barlaz, M. A. (2017). Microbial Population Development during the Anaerobic Decomposition of Food Waste. Presented at the Association. of Environmental Science. and Engineering Professors Biannual Research and Education Conference, Ann Arbor, MI. Arumugam, S. (2017, April). Utilizing Climate Information for Improving Water, Energy, & Ecological Management. Presented at the Southeast Climate Science Center, Raleigh, NC. Arumugam, S. (2017, March). Uncertainty Reduction in Climate Forecasts using Multimodel Combination and their Relevance to Water and Energy Management. Presented at the University of South Carolina, Columbia, SC. Arumugam, S. (2017, July). Decomposition of Sources of Errors in Seasonal Streamflow Forecasting over the US Sunbelt. Presented at the University Council for Atmospheric Research, Boulder, Colorado. Mazrooei, A., Arumugam, S., Lakshmi, V., & Wood, A. (2017, December 11). Data Assimilation using observed streamflow and remotely-sensed soil moisture for improving sub-seasonal-to-seasonal forecasting. Presented at the American Geophysical Union Fall meeting, New Orleans, LA. Mukhopadhyaya, S., Quieroz, A., & Arumugam, S. (2017, May 21). Equivalent Reservoir Modeling for Multipurpose and Multi-reservoir Systems over the Southern United States. Presented at the World Environmental & Water Resources Congress (EWRI), Sacramento, CA. Mukhopadhyaya, S., & Arumugam, S. (2017, December 11). Sub-seasonal-to-seasonal Reservoir Inflow Forecast using Bayesian Hierarchical Hidden Markov Model. Presented at the American Geophysical Union Fall meeting, New Orleans, LA. Seo, S. B., Bhowmik, R. D., Mahinthakumar, G., & Arumugam, S. (2017, May 21). Impact of Correlation Between Precipitation and Temperature on Hydrologic Simulations. Presented at the World Environmental & Water Resources Congress (EWRI), Sacramento, CA. Libera, D., & Arumugam, S. (2017, December 11). Multivariate Bias Correction Procedures for Improving Water Quality Predictions from the SWAT Model. Presented at the American Geophysical Union Fall meeting, New Orleans, LA. Patskoski, J. S., Mukhopadhyaya, S., & Arumugam, S. (2017, May 21). A Hybrid Approach Towards Streamflow Reconstruction Using Tree-ring Chronologies and Ssts over the United States. Presented at the World Environmental & Water Resources Congress (EWRI), Sacramento, CA. Arumugam, S., Mazrooei, A., & Cumbie-Ward, R. (2017, December 11). Integrated Drought Monitoring and Forecasts for Decision Making in Water and Agricultural Sectors over the Southeastern US under Changing Climate. Presented at the American Geophysical Union Fall meeting, New Orleans, LA. Mazrooei, A., & Arumugan, S. (2017, May 21). Utilizing Enkf Data Assimilation in Improving ‘abcd’ Lumped Water Balance Model Performance. Presented at the World Environmental & Water Resources Congress (EWRI), Sacramento, CA. Sankarasubramanian, A. (2017). Climate Informed Uncertainty Analyzes for Integrated Water Resources Sustainability [Technical Report]. National Science Foundation. Doshi, K., Roy, T., & Parihar, Y. S. (2017). Reliability based inspection planning using fracture mechanics based fatigue evaluations for ship structural details. Marine Structures, 54, 1–22. https://doi.org/10.1016/j.marstruc.2017.03.003 Goenaga Silvera, B., Fuentes, L. G., & Mora, O. (2017). Effect of Road Roughness and Vehicle Speed on Dynamic Load Prediction and Pavement Performance Reduction. Proceedings of the Transportation Research Board 96th Annual Meeting. Presented at the Transportation Research Board 96th Annual Meeting, Washington, DC. Goenaga, B., Fuentes, L., & Mora, O. (2017). Evaluation of the methodologies used to generate random pavement profiles based on the power spectral density: An approach based on the international roughness index | Análisis de las metodologías utilizadas para generar perfiles aleatorios de pavimento con base en la densidad espectral de potencia (DEP): Un enfoque ajuste basado en el índice de rugosidad internacional. Ingenieria e Investigacion, 37(1), 49–57. https://doi.org/10.15446/ing.investig.v37n1.57277 Hadiuzzman, M., Das, T., Hasnat, M. M., Hossain, S., & Rafee Musabbir, S. (2017). Structural equation modeling of user satisfaction of bus transit service quality based on stated preferences and latent variables. Transportation Planning and Technology, 40(3), 257–277. Chowdhury, I. C., & Cabas, A. (2017). Ground Motions from the August 24, 2016 Rieti Earthquake in Italy. Presented at the Geotechnical Frontiers 2017 Conference, Orlando, Florida. Ryan, N. A., Lin, Y., Mitchell-Ward, N., Mathieu, J. L., & Johnson, J. X. (2017). Life Cycle Environmental Impacts of using Lithium Ion Batteries for Power System Reserves and Strategies for Mitigation. Proceedings of 2017 AEESP Research and Education Conference. Paper presented at the 2017 AEESP Research and Education Conference, Ann Arbor, MI. Cabas, A., & Rodriguez-Marek, A. (2017). Estimation of Site-Specific Kappa (κ0)-Consistent Damping Values at Selected Stations from the KiK-net Database. Presented at the 2017 SSA Annual Meeting, Denver, Colorado. Rodriguez-Marek, A., Dawood, H. M., Upadhyaya, S., & Cabas, A. (2017). An empirical study of the parameterization of site response using the KiKnet array (USGS Report No. G14AP00017). Cabas, A., & Rodriguez-Marek, A. (2017). What Can We Learn from Kappa (k) to Achieve a Better Characterization of Damping in Geotechnical Site Response Models? Geotechnical Frontiers: Seismic Performance and Liquefaction. Presented at the ASCE Geotechnical Frontiers 2017 Conference, Orlando, Florida. https://doi.org/10.1061/9780784480489.001 Gupta, A., & Bose, M. K. (2017). Significance of non-classical damping in seismic qualification of equipment and piping. Nuclear Engineering and Design, 317, 90–99. https://doi.org/10.1016/J.NUCENGDES.2017.03.020 Zamani, A., & Montoya, B. M. (2017). Shearing and Hydraulic Behavior of MICP Treated Silty Sand. Geotechnical Frontiers 2017. Presented at the Geotechnical Frontiers 2017. https://doi.org/10.1061/9780784480489.029 DeCarolis, J., Daly, H., Dodds, P., Keppo, I., Li, F., McDowall, W., … Zeyringer, M. (2017). Formalizing best practice for energy system optimization modelling. Applied Energy, 194, 184–198. https://doi.org/10.1016/J.APENERGY.2017.03.001 Hart, K. R., Lankford, S. M., Freund, I. A., Patrick, J. F., Krull, B. P., Wetzel, E. D., … White, S. R. (2017). Repeated healing of delamination damage in vascular composites by pressurized delivery of reactive agents. Composites Science and Technology, 151, 1–9. https://doi.org/10.1016/J.COMPSCITECH.2017.07.027 Zahabi, M., Machado, P., Lau, M. Y., Deng, Y., Pankok, C., Jr., Hummer, J., … Kaber, D. B. (2017). Driver performance and attention allocation in use of logo signs on freeway exit ramps. Applied Ergonomics, 65, 70–80. https://doi.org/10.1016/J.APERGO.2017.06.001 Zahabi, M., Machado, P., Pankok, C., Jr., Lau, M. Y., Liao, Y.-F., Hummer, J., … Kaber, D. B. (2017). The role of driver age in performance and attention allocation effects of roadway sign count, format and familiarity. Applied Ergonomics, 63, 17–30. https://doi.org/10.1016/J.APERGO.2017.04.001 Bennett, V., Jones, C., Bekaert, D., Bond, J., Helal, A., Dudas, J., … Abdoun, T. (2017). Deformation Monitoring for the Assessment of Sacramento Delta Levee Performance. Geo-Risk 2017. Presented at the Geo-Risk 2017. https://doi.org/10.1061/9780784480717.003 Tang, C.-T., Borden, R. H., & Gabr, M. A. (2017). Approach for Estimating Effective Friction Angle from Cone Penetration Test in Unsaturated Residual Soils. Journal of Geotechnical and Geoenvironmental Engineering, 143(11), 04017087. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001799 Forrester, S. P., Zaman, A., Mathieu, J. L., & Johnson, J. X. (2017). Policy and market barriers to energy storage providing multiple services. The Electricity Journal, 30(9), 50–56. https://doi.org/10.1016/J.TEJ.2017.10.001 Berry, M., Johnson, J., & McDevitt, K. (2017). Effect of cold temperatures on the behavior and ultimate capacity of GFRP-reinforced concrete beams. Cold Regions Science and Technology, 136, 9–16. https://doi.org/10.1016/J.COLDREGIONS.2017.01.003 Schar, M., Gilmartin, S., Harris, A., Rieken, B., & Sheppard, S. (2017). Innovation Self-Efficacy: A Very Brief Measure for Engineering Students. Proceedings for the American Society for Engineering Education Annual Conference, June 25-28. Columbus, OH. Streveler, R. A., Matusovich, H. M., Carrico, C. P. E., Brunhaver, S., Sheppard, S., Chen, H. L., … Sama, M. (2017). Professional Engineering Pathways Study: Using a community of practice model to propagate findings and engage the community. ASEE Annual Conference and Exposition, Conference Proceedings, 2017. Harris, A., Gilmartin, S., Reinders, K., & Sheppard, S. (2017). Understanding Engineering Student Motivating Factors for Job Application and Selection. Proceedings of the American Society for Engineering Education Annual Conference, June 25-28. Columbus, OH. Gilmartin, S. K., Chen, H. L., Schar, M. F., Jin, Q., Toye, G., Harris, A., … Sheppard, S. D. (2017). Designing a longitudinal study of engineering students’ innovation and engineering interests and plans: The Engineering Majors Survey Project. EMS 1.0 and 2.0 Technical Report. Stanford University Designing Education Lab, Stanford, CA, Technical Report. Streveler, R. A., Matusovich, H. M., Cheryl Carrico, P. E., Brunhaver, S. R., Sheppard, S., Chen, H. L., … Sama, M. (2017). Board# 138: Professional Engineering Pathways Study: Using a Community of Practice Model to Propagate Findings and Engage the Community. 2017 ASEE Annual Conference & Exposition. Noorvand, H., Karnati, G., & Underwood, B. S. (2017). Autonomous Vehicles. Transportation Research Record: Journal of the Transportation Research Board, 2640(1), 21–28. https://doi.org/10.3141/2640-03 Abkarian, H., El Asmar, M., & Underwood, S. (2017). Impact of Alternative Project Delivery Systems on the International Roughness Index: Case Studies of Transportation Projects in the Western United States. Transportation Research Record: Journal of the Transportation Research Board, 2630(1), 76–84. https://doi.org/10.3141/2630-10 Medina, J. R., & Underwood, B. S. (2017). Micromechanical shear modulus modeling of activated crumb rubber modified asphalt cements. Construction and Building Materials, 150, 56–65. https://doi.org/10.1016/j.conbuildmat.2017.05.208 Underwood, B. S., Guido, Z., Gudipudi, P., & Feinberg, Y. (2017). Increased costs to US pavement infrastructure from future temperature rise. Nature Climate Change, 7(10), 704–707. https://doi.org/10.1038/nclimate3390 Kim, Y., Eisenberg, D. A., Bondank, E. N., Chester, M. V., Mascaro, G., & Underwood, B. S. (2017). Fail-safe and safe-to-fail adaptation: decision-making for urban flooding under climate change. Climatic Change, 145(3-4), 397–412. https://doi.org/10.1007/s10584-017-2090-1 Patskoski, J., & Sankarasubramanian, A. (2017). Reducing uncertainty in stochastic streamflow generation and reservoir sizing by combining observed, reconstructed and projected streamflow. Stochastic Environmental Research and Risk Assessment, 32(4), 1065–1083. https://doi.org/10.1007/s00477-017-1456-2 Mazrooei, A., & Sankarasubramanian, A. (2017). Utilizing Probabilistic Downscaling Methods to Develop Streamflow Forecasts from Climate Forecasts. Journal of Hydrometeorology, 18(11), 2959–2972. https://doi.org/10.1175/JHM-D-17-0021.1 Bhowmik, R. D., Sharma, A., & Sankarasubramanian, A. (2017). Reducing Model Structural Uncertainty in Climate Model Projections—A Rank-Based Model Combination Approach. Journal of Climate, 30(24), 10139–10154. https://doi.org/10.1175/JCLI-D-17-0225.1 Kominoski, J. S., Ruhí, A., Hagler, M. M., Petersen, K., Sabo, J. L., Sinha, T., … Olden, J. D. (2017). Patterns and drivers of fish extirpations in rivers of the American Southwest and Southeast. Global Change Biology, 24(3), 1175–1185. https://doi.org/10.1111/gcb.13940 Pour-Ghaz, M., Wilson, J., Spragg, R., Nadukuru, S. (S. S., Kim, J., O’Connor, S. M., … Weiss, J. (2017). Performance and damage evolution of plain and fibre-reinforced segmental concrete pipelines subjected to transverse permanent ground displacement. Structure and Infrastructure Engineering, 14(2), 232–246. https://doi.org/10.1080/15732479.2017.1349809 Abbsaian-Hosseini, S. A., Liu, M., & Hsiang, S. M. (2017). Social network analysis for construction crews. International Journal of Construction Management, 19(2), 113–127. https://doi.org/10.1080/15623599.2017.1389642 Alfaro, J. F., Miller, S., Johnson, J. X., & Riolo, R. R. (2017). Improving rural electricity system planning: An agent-based model for stakeholder engagement and decision making. Energy Policy, 101, 317–331. https://doi.org/10.1016/j.enpol.2016.10.020 Novacheck, J., & Johnson, J. X. (2017). Diversifying wind power in real power systems. Renewable Energy, 106, 177–185. https://doi.org/10.1016/j.renene.2016.12.100 Arbabzadeh, M., Johnson, J. X., & Keoleian, G. A. (2017). Parameters driving environmental performance of energy storage systems across grid applications. Journal of Energy Storage, 12, 11–28. https://doi.org/10.1016/j.est.2017.03.011 Johnson, J. X. (2017). Location or insolation: the importance of siting in emissions mitigation from solar photovoltaics. Wiley Interdisciplinary Reviews: Energy and Environment, 6(5), e249. https://doi.org/10.1002/wene.249 Lin, Y., Mathieu, J. L., Johnson, J. X., Hiskens, I. A., & Backhaus, S. (2017). Explaining inefficiencies in commercial buildings providing power system ancillary services. Energy and Buildings, 152, 216–226. https://doi.org/10.1016/j.enbuild.2017.07.042 Shafiee, M. E., & Berglund, E. Z. (2017). Agent-based modelling approach to evaluate the effect of collaboration among scientists in scientific workflows. Journal of Simulation, 13(1), 1–13. https://doi.org/10.1080/17477778.2017.1387333 Ramsey, E., Berglund, E., & Goyal, R. (2017). The Impact of Demographic Factors, Beliefs, and Social Influences on Residential Water Consumption and Implications for Non-Price Policies in Urban India. Water, 9(11), 844. https://doi.org/10.3390/w9110844 Liu, F., Coronell, O., & Call, D. F. (2017). Electricity generation using continuously recirculated flow electrodes in reverse electrodialysis. Journal of Power Sources, 355, 206–210. https://doi.org/10.1016/j.jpowsour.2017.04.061 Zeiada, W., Hamad, K., Omar, M., Underwood, B. S., Khalil, M. A., & Karzad, A. S. (2017). Investigation and modelling of asphalt pavement performance in cold regions. International Journal of Pavement Engineering, 20(8), 986–997. https://doi.org/10.1080/10298436.2017.1373391 Stanisavljevic, N., Levis, J. W., & Barlaz, M. A. (2017). Application of a Life Cycle Model for European Union Policy-Driven Waste Management Decision Making in Emerging Economies. Journal of Industrial Ecology, 22(2), 341–355. https://doi.org/10.1111/jiec.12564 Grieshop, A. P., Jain, G., Sethuraman, K., & Marshall, J. D. (2017). Emission factors of health- and climate-relevant pollutants measured in home during a carbon-finance-approved cookstove intervention in rural India. GeoHealth, 1(5), 222–236. https://doi.org/10.1002/2017gh000066 Cabas, A., & Rodriguez-Marek, A. (2017). Vs-κ0 Correction Factors for Input Ground Motions used in Seismic Site Response Analyses. Earthquake Spectra. https://doi.org/10.1193/122315EQS188M Sadler, M., Wischer, B., Gordon, J., Wilkerson, C., Tabor, C., Fredericks, D., & Ducoste, J. (2017). Unintended consequences of a local limits revision: One utility's experience with fats, oils, and grease. Water Environment Federation Technical Exhibition and Conference 2017, WEFTEC 2017, 8, 5522–5534. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85052083486&partnerID=MN8TOARS Brown-Steiner, B., Selin, N. E., Prinn, R. G., Monier, E., Tilmes, S., Emmons, L., & Garcia-Menendez, F. (2017, November 28). Supplementary material to "Maximizing Ozone Signals Among Chemical, Meteorological, and Climatological Variability" (Vol. 11). Vol. 11. https://doi.org/10.5194/acp-2017-954-supplement Tajalli, M., & Hajbabaie, A. (2017). On the relationships between commuting mode choice and public health. Journal of Transport & Health, 4, 267–277. https://doi.org/10.1016/j.jth.2016.12.007 Hajbabaie, A., Kim, S. K., Schroeder, B. J., Aghdashi, S., Rouphail, N. M., & Tabrizi, K. (2017). Estimation of saturation headway in work zones on urban streets. Transportation Research Record, 2615(1), 26–34. https://doi.org/10.3141/2615-04 Al Islam, S. M. A. B., & Hajbabaie, A. (2017). Distributed coordinated signal timing optimization in connected transportation networks. Transportation Research Part C: Emerging Technologies, 80, 272–285. https://doi.org/10.1016/j.trc.2017.04.017 Mehrabipour, M., & Hajbabaie, A. (2017). A cell-based distributed-coordinated approach for network-level signal timing optimization. Computer-Aided Civil and Infrastructure Engineering, 32(7), 599–616. https://doi.org/10.1111/mice.12272 Del Giudice, D., & Davies, A. B. (2017). Communication: A few words can make a big impact. Nature, 541(7635). https://doi.org/10.1038/541030e Blaney, L., Perlinger, J. A., Bartelt-Hunt, S. L., Kandiah, R., & Ducoste, J. (2017). Another grand challenge: Diversity in environmental engineering. Environmental Engineering Science. https://doi.org/10.1089/ees.2017.0337 Raymond, P., Searcy, S., Findley, D., Miller, S., & Redden, C. (2017). Additional analysis of the National Child Restraint Use Special Study (No. DOT HS 812 462). Washington, DC: National Highway Traffic Safety Administration. Findley, D. J., Anderson, T., Bert, S., Nye, T., & Letchworth, W. (2017). Ferry Terminal Wait Time Study. Proceedings of the Transportation Research Board 96th Annual Meeting, 16–00024. Washington, DC: Transportation Research Board of the National Academies. Brown-Steiner, B., Selin, N. E., Prinn, R. G., Monier, E., Tilmes, S., Emmons, L., & Garcia-Menendez, F. (2017, November 28). Maximizing Ozone Signals Among Chemical, Meteorological, and Climatological Variability. Atmospheric Chemistry and Physics Discussions, Vol. 11, pp. 1–38. https://doi.org/10.5194/acp-2017-954 Khan, T., & Frey, H. C. (2017). Key factors affecting inter-county variability in moves county-level energy inventory. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85039169682&partnerID=MN8TOARS Wei, T., Khan, T., & Frey, H. C. (2017). Development of simplified models of CNG, diesel, and hybrid transit bus energy use. Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85039153359&partnerID=MN8TOARS Han, K., & Golparvar-Fard, M. (2017). Crowdsourcing BIM-guided collection of construction material library from site photologs. Visualization in Engineering, 5(1). https://doi.org/10.1186/s40327-017-0052-3 Altuntas, A., & Baugh, J. (2017). Verifying Concurrency in an Adaptive Ocean Circulation Model. Proceedings of the First International Workshop on Software Correctness for HPC Applications - Correctness'17. https://doi.org/10.1145/3145344.3145346 Daniel, J. S., Kim, Y. R., & Roque, R. (2017). Editorial. ROAD MATERIALS AND PAVEMENT DESIGN, Vol. 18, pp. 1–1. https://doi.org/10.1080/14680629.2017.1389095 Islam, N., Dewees, D. J., Cooch, M., & Hassan, T. (2017). Creep-fatigue damage evaluation of modified grade 91 headers using damage coupled unified viscoplastic model. Proceedings of the ASME Pressure Vessels and Piping Conference, 2017, Vol 3B. https://doi.org/10.1115/pvp2017-65851 Islam, N., Dewees, D. J., & Hassan, T. (2017). Unified viscoplastic model coupled with damage for evaluation of creep-fatigue of grade 91 steel. Proceedings of the ASME pressure vessels and piping conference, 2017, vol 6a. https://doi.org/10.1115/pvp2017-65849 Boroujeni, K. A., & Han, K. (2017). Perspective-Based Image-to-BIM Alignment for Automated Visual Data Collection and Construction Performance Monitoring. Computing in Civil Engineering 2017, 171–178. https://doi.org/10.1061/9780784480830.022 Islam, N., & Hassan, T. (2017). Influence of initial and welding residual stresses on low cycle fatigue and ratcheting response simulations of elbows. Proceedings of the ASME Pressure Vessels and Piping Conference, 2017, vol 8. https://doi.org/10.1115/pvp2017-65847 Yeom, C., Hajbabaie, A., Rouphail, N. M., Rasdorf, W., & Schroeder, B. J. (2017). Freeway work zone free-flow speed model development. ITE Journal (Institute of Transportation Engineers), 87(11), 38–44. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85044119212&partnerID=MN8TOARS Jeelani, I., Han, K., & Albert, A. (2017). Development of Immersive Personalized Training Environment for Construction Workers. Computing in Civil Engineering 2017, 407–415. https://doi.org/10.1061/9780784480830.050 Sun, L. S., Thomas, J., Singh, S., Li, D. X., Baran, M., Lubkeman, D., … Watts, S. (2017). Cost-benefit assessment challenges for a smart distribution system: A case study. 2017 ieee power & energy society general meeting. https://doi.org/10.1109/pesgm.2017.8274167 List, G. F., & Williams, B. (2017). Advances in travel time reliability monitoring and assessment. JOURNAL OF INTELLIGENT TRANSPORTATION SYSTEMS, Vol. 21, pp. 435–438. https://doi.org/10.1080/15472450.2017.1403536 Shahrin, R., & Bobko, C. P. (2017). Characterizing Strength and Failure of Calcium Silicate Hydrate Aggregates in Cement Paste under Micropillar Compression. JOURNAL OF NANOMECHANICS AND MICROMECHANICS, 7(4). https://doi.org/10.1061/(asce)nm.2153-5477.0000137 Albert, A., & Hallowell, M. R. (2017). Modeling the Role of Social Networks on Hazard Recognition and Communication. PRACTICE PERIODICAL ON STRUCTURAL DESIGN AND CONSTRUCTION, 22(4). https://doi.org/10.1061/(asce)sc.1943-5576.0000337 Hao, Z., Sun, M., Ducoste, J. J., Benson, C. H., Luettich, S., Castaldi, M. J., & Barlaz, M. A. (2017). Heat Generation and Accumulation in Municipal Solid Waste Landfills. Environmental Science & Technology, 51(21), 12434–12442. https://doi.org/10.1021/acs.est.7b01844 Chipeta, W. C., Holm, R. H., Kamanula, J. F., Mtonga, W. E., & de los Reyes, F. L., III. (2017). Designing local solutions for emptying pit latrines in low-income urban settlements (Malawi). Physics and Chemistry of the Earth, Parts A/B/C, 100, 336–342. https://doi.org/10.1016/j.pce.2017.02.012 Rowings, J. E., Jahren, C. T., & Jaselskis, E. J. (2017, September). Perspectives of the Journal of Construction Engineering and Management Spanning Three Decades. JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, Vol. 143. https://doi.org/10.1061/(asce)co.1943-7862.0001380 Morrison, M., Quayyum, S., & Hassan, T. (2017). Performance enhancement of eight bolt extended end-plate moment connections under simulated seismic loading. ENGINEERING STRUCTURES, 151, 444–458. https://doi.org/10.1016/j.engstruct.2017.08.040 Gudipudi, P. P., Underwood, B. S., & Zalghout, A. (2017). Impact of climate change on pavement structural performance in the United States. Transportation Research Part D: Transport and Environment, 57, 172–184. https://doi.org/10.1016/j.trd.2017.09.022 Cabas, A., Rodriguez‐Marek, A., & Bonilla, L. F. (2017). Estimation of Site‐Specific Kappa (κ0)‐Consistent Damping Values at KiK‐Net Sites to Assess the Discrepancy between Laboratory‐Based Damping Models and Observed Attenuation (of Seismic Waves) in the Field. Bulletin of the Seismological Society of America, 107(5), 2258–2271. https://doi.org/10.1785/0120160370 Astaneh, A. V., & Guddati, M. N. (2017). Dispersion analysis of composite acousto-elastic waveguides. COMPOSITES PART B-ENGINEERING, 130, 200–216. https://doi.org/10.1016/j.compositesb.2017.07.040 Kim, D., & Kim, Y. R. (2017). Development of Stress Sweep Rutting (SSR) test for permanent deformation characterization of asphalt mixture. CONSTRUCTION AND BUILDING MATERIALS, 154, 373–383. https://doi.org/10.1016/j.conbuildmat.2017.07.172 Kandiah, V., Binder, A. R., & Berglund, E. Z. (2017). An Empirical Agent-Based Model to Simulate the Adoption of Water Reuse Using the Social Amplification of Risk Framework. Risk Analysis, 37(10), 2005–2022. https://doi.org/10.1111/risa.12760 Cho, S.-H., Karshenas, A., Tayebali, A. A., Guddati, M. N., & Kim, Y. R. (2017). A mechanistic approach to evaluate the potential of the debonding distress in asphalt pavements. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 18(12), 1098–1110. https://doi.org/10.1080/10298436.2016.1149837 Xie, W., Castorena, C., Wang, C., & Kim, Y. R. (2017). A framework to characterize the healing potential of asphalt binder using the linear amplitude sweep test. CONSTRUCTION AND BUILDING MATERIALS, 154, 771–779. https://doi.org/10.1016/j.conbuildmat.2017.08.021 He, X., de los Reyes, F. L., III, & Ducoste, J. J. (2017). A critical review of fat, oil, and grease (FOG) in sewer collection systems: Challenges and control. Critical Reviews in Environmental Science and Technology, 47(13), 1191–1217. https://doi.org/10.1080/10643389.2017.1382282 Ahmed, R., Barrett, P. R., Menon, M., & Hassan, T. (2017). Thermo-mechanical low-cycle fatigue-creep of Haynes 230. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 126, 90–104. https://doi.org/10.1016/j.ijsolstr.2017.07.033 Bradham, K. D., Nelson, C. M., Kelly, J., Pomales, A., Scruton, K., Dignam, T., … Thomas, D. J. (2017). Relationship Between Total and Bioaccessible Lead on Children's Blood Lead Levels in Urban Residential Philadelphia Soils. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 51(17), 10005–10011. https://doi.org/10.1021/acs.est.7b02058 Borden, R. C., Won, J., & Yuncu, B. (2017). Natural and enhanced attenuation of explosives on a hand grenade range. Journal of Environmental Quality, 46(5), 961–967. Safaei, F., & Castorena, C. (2017). Material nonlinearity in asphalt binder fatigue testing and analysis. MATERIALS & DESIGN, 133, 376–389. https://doi.org/10.1016/j.matdes.2017.08.010 Won, J., & Borden, R. C. (2017). Laboratory column evaluation of high explosives attenuation in grenade range soils. Journal of Environmental Quality, 46(5), 968–974. Rasdorf, W., Machado, P., Hummer, J. E., Kaber, D., Zahabi, M., Lau, M., & Pankok, C. (2017). Driver Accuracy in Identifying Food and Attraction Targets on Business Logo Signs Impacts of Driver Age, Number of Panels, Logo Familiarity, and Logo Format. TRANSPORTATION RESEARCH RECORD, (2624), 9–17. https://doi.org/10.3141/2624-02 Rashetnia, R., Hallaji, M., Smyl, D., Seppanen, A., & Pour-Ghaz, M. (2017). Detection and localization of changes in two-dimensional temperature distributions by electrical resistance tomography. SMART MATERIALS AND STRUCTURES, 26(11). https://doi.org/10.1088/1361-665x/aa8f75 Ahmed, R., & Hassan, T. (2017). Constitutive modeling for thermo-mechanical low-cycle fatigue-creep stress-strain responses of Haynes 230. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 126, 122–139. https://doi.org/10.1016/j.ijsolstr.2017.07.031 Wargo, A., Safavizadeh, S. A., & Kim, Y. R. (2017). Comparing the performance of fiberglass grid with composite interlayer systems in asphalt concrete. Transportation Research Record, (2631), 123–132. Smyl, D., Ghasemzadeh, F., & Pour-Ghaz, M. (2017). Can the dual-permeability model be used to simulate unsaturated moisture flow in damaged mortar and concrete? International Journal of Advances in Engineering Sciences and Applied Mathematics, 9(2), 54–66. https://doi.org/10.1007/s12572-017-0180-y Yu, L., Yuan, W., Liu, X., Xu, X., & Ruan, S. (2017). Asymmetry of the free-standing polyelectrolyte multilayers. APPLIED SURFACE SCIENCE, 422, 46–55. https://doi.org/10.1016/j.apsusc.2017.05.085 Cabas, A., & Rodriguez-Marek, A. (2017). V-S-kappa(0) Correction Factors for Input Ground Motions Used in Seismic Site Response Analyses. EARTHQUAKE SPECTRA, 33(3), 917–941. https://doi.org/10.1193/22315eqs188m Warchol, S., Chase, T., & Cunningham, C. (2017). Use of Microsimulation to Evaluate Signal-Phasing Schemes at Diverging Diamond Interchanges. TRANSPORTATION RESEARCH RECORD, (2620), 10–19. https://doi.org/10.3141/2620-02 Fernandes, P., Rouphail, N. M., & Coelho, M. C. (2017). Turboroundabouts along corridors analysis of operational and environmental impacts. Transportation Research Record, (2627), 46–56. Frey, H. C., Delavarrafiee, M., & Singh, S. (2017). Real-World Freeway and Ramp Activity and Emissions for Light-Duty Gasoline Vehicles. TRANSPORTATION RESEARCH RECORD, 2627(2627), 17–25. https://doi.org/10.3141/2627-03 Zahabi, M., Pankok, C., Jr., Kaber, D. B., Machado, P., Lau, M. Y., Hummer, J. E., & Rasdorf, W. (2017). On-Road Visual Sign Salience, Driver Attention Allocation, and Target Detection Accuracy. TRANSPORTATION RESEARCH RECORD, (2663), 40–47. https://doi.org/10.3141/2663-06 Yeom, C., Schroeder, B. J., Cunningham, C., Salamati, K., & Rouphail, N. M. (2017). Lane utilization model development for diverging diamond interchanges. Transportation Research Record, (2618), 27–37. Lee, K., Pape, S., Castorena, C., & Kim, Y. R. (2017). Evaluation of Small Specimen Geometries for Asphalt Mixture Performance Testing and Pavement Performance Prediction. TRANSPORTATION RESEARCH RECORD, (2631), 74–82. https://doi.org/10.3141/2631-09 Galik, C. S., DeCarolis, J. F., & Fell, H. (2017). Evaluating the US Mid-Century Strategy for Deep Decarbonization amidst early century uncertainty. CLIMATE POLICY, 17(8), 1046–1056. https://doi.org/10.1080/14693062.2017.1340257 Goodnight, J. C., Kowalsky, M. J., & Nau, J. M. (2017, September). Closure to "Modified Plastic-Hinge Method for Circular RC Bridge Columns" by Jason C. Goodnight, Mervyn J. Kowalsky, and James M. Nau. JOURNAL OF STRUCTURAL ENGINEERING, Vol. 143. https://doi.org/10.1061/(asce)st.1943-541x.0001867 Kim, D., & Kim, Y. R. (2017). Characterization of Permanent Deformation of Asphalt Mixtures with Minimum Strain Rate, LVECD Program, and Triaxial Stress Sweep Test. TRANSPORTATION RESEARCH RECORD, (2631), 96–104. https://doi.org/10.3141/2631-11 Rouphail, N. M., Kim, S., & Aghdashi, S. (2017). Application of high-resolution vehicle data for free-flow speed estimation. Transportation Research Record, (2615), 105–112. Adams, J., Castorena, C., Im, J. H., Ilias, M., & Kim, Y. R. (2017). Addressing Raveling Resistance in Chip Seal Specifications. TRANSPORTATION RESEARCH RECORD, (2612), 39–46. https://doi.org/10.3141/2612-05 Levis, J. W., Weisbrod, A., Van Hoof, G., & Barlaz, M. A. (2017). A review of the airborne and waterborne emissions from uncontrolled solid waste disposal sites. Critical Reviews in Environmental Science and Technology, 47(12), 1003–1041. https://doi.org/10.1080/10643389.2017.1342513 Chacon-Hurtado, D., Bardaka, E., Yang, R., Gkritza, K., & Fricker, J. D. (2017). Tools for the Wider Economic Impact Assessment of Corridor Improvements: Lessons Learned from the FHWA Implementation Assistance Program in Indiana. JOURNAL OF TRANSPORTATION ENGINEERING PART A-SYSTEMS, 143(5). https://doi.org/10.1061/jtepbs.0000051 Li, B., Queiroz, A. R., DeCarolis, J. F., Bane, J., He, R., Keeler, A. G., & Neary, V. S. (2017). The economics of electricity generation from Gulf Stream currents. ENERGY, 134, 649–658. https://doi.org/10.1016/j.energy.2017.06.048 Sankarasubramanian, A., Sabo, J. L., Larson, K. L., Seo, S. B., Sinha, T., Bhowmik, R., … Kominoski, J. (2017). Synthesis of public water supply use in the United States: Spatio‐temporal patterns and socio‐economic controls. Earth's Future, 5(7), 771–788. https://doi.org/10.1002/2016ef000511 Reece, S. M., Sinha, A., & Grieshop, A. P. (2017). Primary and Photochemically Aged Aerosol Emissions from Biomass Cookstoves: Chemical and Physical Characterization. Environmental Science & Technology, 51(16), 9379–9390. https://doi.org/10.1021/acs.est.7b01881 Kingsbury, R. S., Liu, F., Zhu, S., Boggs, C., Armstrong, M. D., Call, D. F., & Coronell, O. (2017). Impact of natural organic matter and inorganic solutes on energy recovery from five real salinity gradients using reverse electrodialysis. JOURNAL OF MEMBRANE SCIENCE, 541, 621–632. https://doi.org/10.1016/j.memsci.2017.07.038 Lee, J., & Do, J. N. (2017). Experimental investigation of the horizontal resistance of group suction piles with different pile spacing. Geotechnical frontiers 2017: foundations, (279), 154–163. https://doi.org/10.1061/9780784480465.016 Liu, Y., Zhang, Y., Ou-Yang, W., Sales, B. B., Sun, Z., Liu, F., & Zhao, R. (2017). Capacitive Neutralization Dialysis for Direct Energy Generation. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 51(16), 9363–9370. https://doi.org/10.1021/acs.est.7b01426 Borden, M. J., Hughes, T. J. R., Landis, C. M., Anvari, A., & Lee, I. J. (2017, September 1). A phase-field formulation for fracture in ductile materials: Finite deformation balance law derivation, plastic degradation, and stress triaxiality effects (vol 312, pg 130, 2016). COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, Vol. 324, pp. 712–713. https://doi.org/10.1016/j.cma.2017.06.023 Yeom, C., Searcy, S. E., Findley, D. J., & Schroeder, B. J. (2017). A new method to account for seasonal peak traffic volumes in project prioritization. ITE Journal (Institute of Transportation Engineers), 87(8), 37–43. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85044237554&partnerID=MN8TOARS Gudipudi, P. P., & Underwood, B. S. (2017). Use of Fine Aggregate Matrix Experimental Data in Improving Reliability of Fatigue Life Prediction of Asphalt Concrete: Sensitivity of This Approach to Variation in Input Parameters. Transportation Research Record: Journal of the Transportation Research Board, 2631(1), 65–73. https://doi.org/10.3141/2631-07 Medina, J., Underwood, B. S., & Kaloush, K. E. (2017). Micromechanical shear modulus modeling of activated crumb rubber modified asphalt cements. Construction and Building Materials, 56–65. Markolf, S., Hoehne, C., Fraser, A., Underwood, B. S., & Chester, M. (2017). Maintaining reliability of transportation systems and interdependent infrastructure under climate change. International Society of Industrial Ecology and International Symposium on Sustainable Systems and Technology Conference. Levis, J. W., & Barlaz, M. (2017). Life-cycle modeling of municipal solid waste landfills. Geotechnical frontiers 2017: waste containment, barriers, remediation, and sustainable geoengineering, (276), 355–368. https://doi.org/10.1061/9780784480434.038 Bagal, A., Zhang, X. A., Shahrin, R., Dandley, E. C., Zhao, J. J., Poblete, F. R., … Chang, C. H. (2017). Large-area nanolattice film with enhanced modulus, hardness, and energy dissipation. Scientific Reports, 7. Rad, F. Y., Elwardany, M. D., Castorena, C., & Kim, Y. R. (2017). Investigation of proper long-term laboratory aging temperature for performance testing of asphalt concrete. CONSTRUCTION AND BUILDING MATERIALS, 147, 616–629. https://doi.org/10.1016/j.conbuildmat.2017.04.197 Gudipudi, P., & Underwood, B. S. (2017). Improvement in reliability of fatigue life prediction of asphalt concrete using fine aggregate matrix (FAM) experimental data and its sensitivity to input parameters. 96th Annual Meeting of the Transportation Research Board. Noorvand, H., Sai, G., & Underwood, B. S. (2017). Implications of autonomous truck use on flexible pavement performance and design. 96th Annual Meeting of the Transportation Research Board. Gudipudi, P., Underwood, B. S., & Zalghout, A. (2017). Impact of climate change on the pavement performance and its sensitivity to various climate prediction models. 96th Annual Meeting of the Transportation Research Board. Abkarian, H., Asmar, M., & Underwood, B. S. (2017). Impact of alternative project deliver systems on the International Roughness Index (IRI) ? Case studies of transportation projects in the Western U.S. 96th Annual Meeting of the Transportation Research Board. Gundla, A., Gudipudi, P., & Underwood, B. S. (2017). Evaluation of the sensitivity of asphalt concrete modulus to binder oxidation with a multiple length scale study. Construction and Building Materials, 152, 954–963. https://doi.org/10.1016/j.conbuildmat.2017.07.067 Gundla, A., & Underwood, S. (2017). Evaluation of in situ RAP binder interaction in asphalt mastics using micromechanical models. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 18(9), 798–810. https://doi.org/10.1080/10298436.2015.1066003 Scavia, D., Bertani, I., Obenour, D. R., Turner, R. E., Forrest, D. R., & Katin, A. (2017). Ensemble modeling informs hypoxia management in the northern Gulf of Mexico. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 114(33), 8823–8828. https://doi.org/10.1073/pnas.1705293114 Gudipudi, P., & Underwood, B. S. (2017). Development of modulus and fatigue test protocol for fine aggregate matrix for axial direction of loading. Journal of Testing and Evaluation, 45(2), 497–508. Yang, S., Braham, A., Underwood, S., Hanz, A., & Reinke, G. (2017). Correlating field performance to laboratory dynamic modulus from indirect tension and torsion bar. ROAD MATERIALS AND PAVEMENT DESIGN, Vol. 18, pp. 104–127. https://doi.org/10.1080/14680629.2016.1267438 Karam, A. L., McMillan, C. C., Lai, Y.-C., de los Reyes, F. L., III, Sederoff, H. W., Grunden, A. M., … Ducoste, J. J. (2017). Construction and Setup of a Bench-scale Algal Photosynthetic Bioreactor with Temperature, Light, and pH Monitoring for Kinetic Growth Tests. Journal of Visualized Experiments, 6(124). https://doi.org/10.3791/55545 Noorvand, H., Sai, G., & Underwood, B. S. (2017). Autonomous vehicles: Assessment of the implications of truck positioning on flexible pavement performance and design. Transportation Research Record, 21–28. Fernandes, P., Coelho, M. C., & Rouphail, N. M. (2017). Assessing the impact of closely-spaced intersections on traffic operations and pollutant emissions on a corridor level. TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT, 54, 304–320. https://doi.org/10.1016/j.trd.2017.05.016 Stempihar, J., Gundla, A., & Underwood, B. S. (2017). Alternate interpretation of stress sensitivity in AASHTO T350. 96th Annual Meeting of the Transportation Research Board. Hao, Z., Sun, M., Ducoste, J., & Barlaz, M. (2017). A Model to Describe Heat Generation and Accumulation at Municipal Solid Waste Landfills. Geotechnical Frontiers 2017, (276), 281–288. https://doi.org/10.1061/9780784480434.030 Aquila, G., Rotela Junior, P., Pamplona, E. de O., & Queiroz, A. R. (2017). Wind power feasibility analysis under uncertainty in the Brazilian electricity market. ENERGY ECONOMICS, 65, 127–136. https://doi.org/10.1016/j.eneco.2017.04.027 Song, L., Li, Q., List, G. F., Deng, Y., & Lu, P. (2017). Using an AHP-ISM Based Method to Study the Vulnerability Factors of Urban Rail Transit System. SUSTAINABILITY, 9(6). https://doi.org/10.3390/su9061065 Arocho, I., Rasdorf, W., Hummer, J., & Lewis, P. (2017). Time and cost characterisation of emissions from non-road diesel equipment for infrastructure projects. INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING, 10(2), 123–134. https://doi.org/10.1080/19397038.2016.1218569 Mousavi, S. H., Gabr, M. A., & Borden, R. H. (2017). Optimum location of geogrid reinforcement in unpaved road. Canadian Geotechnical Journal, 54(7), 1047–1054. https://doi.org/10.1139/cgj-2016-0562 Al-Amin, S., & Berglund, E. Z. (2017). Optimization framework to identify demand reduction strategies for shared groundwater resources. World Environmental and Water Resources Congress 2017: Watershed Management, Irrigation and Drainage, and Water Resources Planning and Management, 669–676. https://doi.org/10.1061/9780784480601.056 Bhowmik, R. D., Sankarasubramanian, A., Sinha, T., Patskoski, J., Mahinthakumar, G., & Kunkel, K. E. (2017). Multivariate Downscaling Approach Preserving Cross Correlations across Climate Variables for Projecting Hydrologic Fluxes. Journal of Hydrometeorology, 18(8), 2187–2205. https://doi.org/10.1175/jhm-d-16-0160.1 Abkarian, H., Asmar, M., & Underwood, B. S. (2017). Impact of alternative project deliver systems on the International Roughness Index (IRI) ? case studies of transportation projects in the Western U.S. Transportation Research Record, 2630, 76–84. Astaneh, A. V., Urban, M. W., Aquino, W., Greenleaf, J. F., & Guddati, M. N. (2017). Arterial waveguide model for shear wave elastography: implementation and in vitro validation. PHYSICS IN MEDICINE AND BIOLOGY, 62(13), 5473–5494. https://doi.org/10.1088/1361-6560/aa6ee3 Altuntas, A., & Baugh, J. (2017). Adaptive subdomain modeling: A multi-analysis technique for ocean circulation models. OCEAN MODELLING, 115, 86–104. https://doi.org/10.1016/j.ocemod.2017.05.009 Sisco, T., Rogers, T., Beckwith, W., Chipeta, W., Holm, R., Buckley, C. A., & de los Reyes, F. L., III. (2017). Trash removal methods for improved mechanical emptying of pit latrines using a screw auger. Journal of Water Sanitation and Hygiene for Development, 7(1), 85–91. https://doi.org/10.2166/washdev.2017.106 Morrison, M., Ahmed, R., & Hassan, T. (2017). Thermomechanical fatigue response and constitutive modeling for Haynes 230. Proceedings of the ASME Pressure Vessels and piping conference, 2016, vol 5. https://doi.org/10.1115/pvp2016-63283 Berglund, A., Areti, V. S., Brill, D., & Mahinthakumar, G. (2017). Successive linear approximation methods for leak detection in water distribution systems. Journal of Water Resources Planning and Management, 143(8). https://doi.org/10.1061/(asce)wr.1943-5452.0000784 Abbasian-Hosseini, S. A., Liu, M., & Hsiang, S. M. (2017). Social network conformity and construction work plan reliability. AUTOMATION IN CONSTRUCTION, 78, 1–12. https://doi.org/10.1016/j.autcon.2017.01.004 Kwag, S., & Gupta, A. (2017). Probabilistic risk assessment framework for structural systems under multiple hazards using Bayesian statistics. NUCLEAR ENGINEERING AND DESIGN, 315, 20–34. https://doi.org/10.1016/j.nucengdes.2017.02.009 Kennedy, A. M., Reinert, A. M., Knappe, D. R. U., & Summers, R. S. (2017). Prediction of Full-Scale GAC Adsorption of Organic Micropollutants. ENVIRONMENTAL ENGINEERING SCIENCE, 34(7), 496–507. https://doi.org/10.1089/ees.2016.0525 Kusam, A., Malladi, H., Tayebali, A. A., & Khosla, N. P. (2017). Laboratory Evaluation of Workability and Moisture Susceptibility of Warm-Mix Asphalt Mixtures Containing Recycled Asphalt Pavements. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 29(5). https://doi.org/10.1061/(asce)mt.1943-5533.0001825 Moghadas Nejad, F., Habibi, M., Hosseini, P., & Jahanbakhsh, H. (2017). Investigating the mechanical and fatigue properties of sustainable cement emulsified asphalt mortar. JOURNAL OF CLEANER PRODUCTION, 156, 717–728. https://doi.org/10.1016/j.jclepro.2017.04.105 Islam, N., & Hassan, T. (2017). Improving simulations for low cycle fatigue and ratcheting responses of elbows. Proceedings of the ASME Pressure Vessels and piping conference, 2016, vol 5. Lee, J., Do, J., Kim, H., & Park, B. (2017). Evaluation of durability and waterproofing characteristic of cast-in-place piles using surfactant grout at the field tests. Grouting 2017: grouting, drilling, and verification, (288), 124–132. https://doi.org/10.1061/9780784480793.012 Martinez-Sanchez, V., Levis, J. W., Damgaard, A., DeCarolis, J. F., Barlaz, M. A., & Astrup, T. F. (2017). Evaluation of Externality Costs in Life-Cycle Optimization of Municipal Solid Waste Management Systems. Environmental Science & Technology, 51(6), 3119–3127. https://doi.org/10.1021/acs.est.6b06125 Norouzi, A., Kim, Y. R., Kim, S. S., & Yang, J. (2017). Effect of Reclaimed Asphalt Pavement Content and Binder Grade on Fatigue-Resisting Performance of Asphalt Mixtures in Georgia. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 29(9). https://doi.org/10.1061/(asce)mt.1943-5533.0001960 Chiposa, R., Holm, R. H., Munthali, C., Chidya, R. C. G., & de los Reyes, F. L., III. (2017). Characterization of pit latrines to support the design and selection of emptying tools in peri-urban Mzuzu, Malawi. Journal of Water Sanitation and Hygiene for Development, 7(1), 151–155. https://doi.org/10.2166/washdev.2017.096 Li, Z., Che, W., Frey, H. C., Lau, A. K. H., & Lin, C. (2017). Characterization of PM2.5 exposure concentration in transport microenvironments using portable monitors. ENVIRONMENTAL POLLUTION, 228, 433–442. https://doi.org/10.1016/j.envpol.2017.05.039 Aquila, G., Pamplona, E. de O., Queiroz, A. R., Rotela Junior, P., & Fonseca, M. N. (2017). [Review of An overview of incentive policies for the expansion of renewable energy generation in electricity power systems and the Brazilian experience]. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 70, 1090–1098. https://doi.org/10.1016/j.rser.2016.12.013 Gabr, M. (2017, May). 2016: A Year in Review. JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING, Vol. 143. https://doi.org/10.1061/(asce)gt.1943-5606.0001730 Mousavi, S. H., Gabr, M. A., & Borden, R. H. (2017). Subgrade resilient modulus prediction using light-weight deflectometer data. Canadian Geotechnical Journal, 54(3), 304–312. https://doi.org/10.1139/cgj-2016-0062 Overby, D., Kowalsky, M., & Seracino, R. (2017). Stress-strain response of A706 grade 80 reinforcing steel. Construction and Building Materials, 145, 292–302. https://doi.org/10.1016/j.conbuildmat.2017.03.200 Cubbage, L. E., Pitt, P. A., Stone, A. L., He, X., & L. de los Reyes III, F. (2017). Steam Application to Destroy Foam-Forming Bacteria in Activated Sludge Systems. Journal of Environmental Engineering, 143(5), 06017001. https://doi.org/10.1061/(asce)ee.1943-7870.0001183 Norouzi, A., & Kim, Y. R. (2017). Ruggedness Study of Dynamic Modulus Testing of Asphalt Concrete in Indirect Tension Mode. JOURNAL OF TESTING AND EVALUATION, 45(2), 601–612. https://doi.org/10.1520/jte20150118 Bareither, C. A., Barlaz, M. A., Doran, M., & Benson, C. H. (2017). Retrospective Analysis of Wisconsin's Landfill Organic Stability Rule. JOURNAL OF ENVIRONMENTAL ENGINEERING, 143(5). https://doi.org/10.1061/(asce)ee.1943-7870.0001192 Sakhaeifar, M. S., Kim, Y. R., & Montano, B. E. G. (2017). Individual temperature based models for nondestructive evaluation of complex moduli in asphalt concrete. CONSTRUCTION AND BUILDING MATERIALS, 137, 117–127. https://doi.org/10.1016/j.conbuildmat.2016.12.145 Lewis, P., & Rasdorf, W. (2017). Fuel Use and Pollutant Emissions Taxonomy for Heavy Duty Diesel Construction Equipment. JOURNAL OF MANAGEMENT IN ENGINEERING, 33(2). https://doi.org/10.1061/(asce)me.1943-5479.0000484 Do, J., Heo, S.-B., Yoon, Y.-W., & Chang, I. (2017). Evaluating the liquefaction potential of gravel soils with static experiments and steady state approaches. KSCE JOURNAL OF CIVIL ENGINEERING, 21(3), 642–651. https://doi.org/10.1007/s12205-016-1365-9 Lee, J.-S., Norouzi, A., & Kim, Y. R. (2017). Determining Specimen Geometry of Cylindrical Specimens for Direct Tension Fatigue Testing of Asphalt Concrete. JOURNAL OF TESTING AND EVALUATION, 45(2), 613–623. https://doi.org/10.1520/jte20140357 Kim, D., & Kim, Y. R. (2017). Determination of Dynamic Modulus Values of Asphalt Mixtures Using Impact Resonance Testing of Thin Disk Specimens. JOURNAL OF TESTING AND EVALUATION, 45(2), 509–520. https://doi.org/10.1520/jte20150076 Shafiee, M. E., & Berglund, E. Z. (2017). Complex Adaptive Systems Framework to Simulate the Performance of Hydrant Flushing Rules and Broadcasts during a Water Distribution System Contamination Event. Journal of Water Resources Planning and Management, 143(4), 04017001. https://doi.org/10.1061/(asce)wr.1943-5452.0000744 Goel, A., Wathore, R., Chakraborty, T., & Agrawal, M. (2017, February). Characteristics of Exposure to Particles due to Incense Burning inside Temples in Kanpur, India. AEROSOL AND AIR QUALITY RESEARCH, Vol. 17, pp. 608–615. https://doi.org/10.4209/aaqr.2016.04.0146 Hummer, J. E., Arocho, I., & Rasdorf, W. (2017). Approach to Assessing Tradeoffs between Construction Equipment Fleet Emissions and Cost. JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, 143(5). https://doi.org/10.1061/(asce)co.1943-7862.0001255 Seppanen, A., Hallaji, M., & Pour-Ghaz, M. (2017). A functionally layered sensing skin for the detection of corrosive elements and cracking. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 16(2), 215–224. https://doi.org/10.1177/1475921716670574 Islam, N., Dewees, D., & Hassan, T. (2017). Unified viscoplasticity modeling features needed for simulation of grade 91 creep and fatigue responses. Proceedings of the ASME Pressure Vessels and Piping Conference, 2016, Vol 6a. https://doi.org/10.1115/pvp2016-63578 Tadinada, S. K., & Gupta, A. (2017). Structural fragility of T-joint connections in large-scale piping systems using equivalent elastic time-history simulations. STRUCTURAL SAFETY, 65, 49–59. https://doi.org/10.1016/j.strusafe.2016.12.003 Davis, J., Cunningham, C., Findley, D., Searcy, S., Martin, J., & Watkins, L. (2017). Relating Public Opinions of Roadway Assets to Field Data with Survey and Focus Groups. TRANSPORTATION RESEARCH RECORD, 2613(2613), 16–28. https://doi.org/10.3141/2613-03 Li, M., Rouphail, N. M., Mahmoudi, M., Liu, J., & Zhou, X. (2017). Multi-scenario optimization approach for assessing the impacts of advanced traffic information under realistic stochastic capacity distributions. TRANSPORTATION RESEARCH PART C-EMERGING TECHNOLOGIES, 77, 113–133. https://doi.org/10.1016/j.trc.2017.01.019 Veytskin, Y. B., Tammina, V. K., Bobko, C. P., Hartley, P. G., Clennell, M. B., Dewhurst, D. N., & Dagastine, R. R. (2017). Micromechanical characterization of shales through nanoindentation and energy dispersive x-ray spectrometry. GEOMECHANICS FOR ENERGY AND THE ENVIRONMENT, 9, 21–35. https://doi.org/10.1016/j.gete.2016.10.004 Ortiz, A. C., Roy, S., & Edmonds, D. A. (2017). Land loss by pond expansion on the Mississippi River Delta Plain. GEOPHYSICAL RESEARCH LETTERS, 44(8), 3635–3642. https://doi.org/10.1002/2017gl073079 Zheng, G., Liu, J., Lei, H., Rahman, M. S., & Tan, Z. (2017). Improvement of very soft ground by a high-efficiency vacuum preloading method: A case study. MARINE GEORESOURCES & GEOTECHNOLOGY, 35(5), 631–642. https://doi.org/10.1080/1064119x.2016.1215363 Huang, S.-Y., Sodano, D., Leonard, T., Luiso, S., & Fedkiw, P. S. (2017). Cobalt-Doped Iron Sulfide as an Electrocatalyst for Hydrogen Evolution. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 164(4), F276–F282. https://doi.org/10.1149/2.0761704jes Kidwell, D. M., Dietrich, J. C., Hagen, S. C., & Medeiros, S. C. (2017). An Earth's Future Special Collection: Impacts of the coastal dynamics of sea level rise on low-gradient coastal landscapes. Earth's Future, 5(1), 2–9. https://doi.org/10.1002/2016ef000493 Cho, S. H., Safavizadeh, S. A., & Kim, Y. R. (2017). Verification of the applicability of the time-temperature superposition principle to interface shear stiffness and strength of GlasGrid-reinforced asphalt mixtures. ROAD MATERIALS AND PAVEMENT DESIGN, 18(4), 766–784. https://doi.org/10.1080/14680629.2016.1189350 Patrick, J. F., Krull, B. P., Garg, M., Mangun, C. L., Moore, J. S., Sottos, N. R., & White, S. R. (2017). Robust sacrificial polymer templates for 3D interconnected microvasculature in fiber-reinforced composites. Composites Part A: Applied Science and Manufacturing, 100, 361–370. https://doi.org/10.1016/j.compositesa.2017.05.022 Oehlers, D. J., Visintin, P., Chen, J.-F., Seracino, R., Wu, Y., & Lucas, W. (2017). Reinforced Concrete Behavior, Research, Development, and Design through Partial-Interaction Mechanics. Journal of Structural Engineering, 143(7), 02517002. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001764 Li, M., Zhou, X., & Rouphail, N. M. (2017). Quantifying travel time variability at a single bottleneck based on stochastic capacity and demand distributions. JOURNAL OF INTELLIGENT TRANSPORTATION SYSTEMS, 21(2), 79–93. https://doi.org/10.1080/15472450.2016.1163639 Feng, K., & Montoya, B. M. (2017). Quantifying Level of Microbial-Induced Cementation for Cyclically Loaded Sand. JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING, 143(6). https://doi.org/10.1061/(asce)gt.1943-5606.0001682 Ju, B. S., Gupta, A., & Ryu, Y. H. (2017). Piping Fragility Evaluation: Interaction With High-Rise Building Performance. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 139(3). https://doi.org/10.1115/1.4034406 Gupta, A., Saigal, R. K., & Ryu, Y. (2017). Performance-Based Reliability of ASME Piping Design Equations. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 139(3). https://doi.org/10.1115/1.4034584 Kelly Herrick, C., & Kowalsky, M. J. (2017). Out-of-Plane Buckling of Ductile Reinforced Structural Walls due to In-Plane Loads. Journal of Structural Engineering, 143(3), 04016182. https://doi.org/10.1061/(asce)st.1943-541x.0001660 Yousefelahiyeh, R., Dominic, C. C. S., & Ducoste, J. (2017). Modeling fats, oil and grease deposit formation and accumulation in sewer collection systems. JOURNAL OF HYDROINFORMATICS, 19(3), 443–455. https://doi.org/10.2166/hydro.2017.016 Kim, D., Norouzi, A., Kass, S., Liske, T., & Kim, Y. R. (2017). Mechanistic performance evaluation of pavement sections containing RAP and WMA additives in Manitoba. CONSTRUCTION AND BUILDING MATERIALS, 133, 39–50. https://doi.org/10.1016/j.conbuildmat.2016.12.035 Norouzi, A., & Kim, Y. R. (2017). Mechanistic evaluation of fatigue cracking in asphalt pavements. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 18(6), 530–546. https://doi.org/10.1080/10298436.2015.1095909 Quayyum, S., & Hassan, T. (2017). Initial Residual Stresses in Hot-Rolled Wide-Flange Shapes: A Computational Technique and Influence on Structural Performances. JOURNAL OF STRUCTURAL ENGINEERING, 143(5). https://doi.org/10.1061/(asce)st.1943-541x.0001739 Robert, A., Morrison, M. L., & Hassan, T. (2017). Influence of notch geometry on the notch vicinity stress and strain responses. Proceedings of the ASME Pressure Vessels and Piping Conference, 2016, Vol 1A. https://doi.org/10.1115/pvp2016-63287 Li, K., He, Y., Campbell, S. K., Colborn, A. S., Jackson, E. L., Martin, A., … Perfecto, I. (2017). From endogenous to exogenous pattern formation: Invasive plant species changes the spatial distribution of a native ant. GLOBAL CHANGE BIOLOGY, 23(6), 2250–2261. https://doi.org/10.1111/gcb.13671 Feng, K., Montoya, B. M., & Evans, T. M. (2017). Discrete element method simulations of bio-cemented sands. COMPUTERS AND GEOTECHNICS, 85, 139–150. https://doi.org/10.1016/j.compgeo.2016.12.028 Safavizadeh, S. A., & Kim, Y. R. (2017). DIC Technique to Investigate Crack Propagation in Grid-Reinforced Asphalt Specimens. Journal of Materials in Civil Engineering, 29(6), 04017011. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001839 Luo, L., He, Q., Jaselskis, E. J., & Xie, J. (2017). Construction Project Complexity: Research Trends and Implications. JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, 143(7). https://doi.org/10.1061/(asce)co.1943-7862.0001306 Li, L., Ngaile, G., & Hassan, T. (2017). A Novel Hybrid Heating Method for Mechanical Testing of Miniature Specimens at Elevated Temperature. JOURNAL OF MICRO AND NANO-MANUFACTURING, 5(2). https://doi.org/10.1115/1.4035954 Bertani, I., Steger, C. E., Obenour, D. R., Fahnenstiel, G. L., Bridgeman, T. B., Johengen, T. H., … Scavia, D. (2017). Tracking cyanobacteria blooms: Do different monitoring approaches tell the same story? SCIENCE OF THE TOTAL ENVIRONMENT, 575, 294–308. https://doi.org/10.1016/j.scitotenv.2016.10.023 Garcia-Menendez, F., Monier, E., & Selin, N. E. (2017). The role of natural variability in projections of climate change impacts on U.S. ozone pollution. Geophysical Research Letters, 44(6), 2911–2921. https://doi.org/10.1002/2016gl071565 Haroglu, D., Powell, N., & Seyam, A.-F. M. (2017). The response of polymer optical fiber (POF) to cyclic loading for the application of a POF sensor for automotive seat occupancy sensing. JOURNAL OF THE TEXTILE INSTITUTE, 108(1), 42–48. https://doi.org/10.1080/00405000.2015.1133755 Haroglu, D., Powell, N., & Seyam, A.-F. M. (2017). The response of polymer optical fiber (POF) to bending and axial tension for the application of a POF sensor for automotive seat occupancy sensing. JOURNAL OF THE TEXTILE INSTITUTE, 108(1), 132–139. https://doi.org/10.1080/00405000.2016.1160755 Pfenninger, S., DeCarolis, J., Hirth, L., Quoilin, S., & Staffell, I. (2017). The importance of open data and software: Is energy research lagging behind? ENERGY POLICY, 101, 211–215. https://doi.org/10.1016/j.enpol.2016.11.046 Tasdighi, A., Arabi, M., & Osmond, D. L. (2017). The Relationship between Land Use and Vulnerability to Nitrogen and Phosphorus Pollution in an Urban Watershed. JOURNAL OF ENVIRONMENTAL QUALITY, 46(1), 113–122. https://doi.org/10.2134/jeq2016.06.0239 Perez-Diaz, I. M., Hayes, J., Medina, E., Anekella, K., Daughtry, K., Dieck, S., … Azcarate-Peril, M. A. (2017). Reassessment of the succession of lactic acid bacteria in commercial cucumber fermentations and physiological and genomic features associated with their dominance. FOOD MICROBIOLOGY, 63, 217–227. https://doi.org/10.1016/j.fm.2016.11.025 Lang, J. R., Allred, B. M. K., Field, J. A., Levis, J. W., & Barlaz, M. A. (2017). National Estimate of Per- and Polyfluoroalkyl Substance (PFAS) Release to U.S. Municipal Landfill Leachate. Environmental Science & Technology, 51(4), 2197–2205. https://doi.org/10.1021/acs.est.6b05005 Wathore, R., Mortimer, K., & Grieshop, A. P. (2017). In-Use Emissions and Estimated Impacts of Traditional, Natural- and Forced-Draft Cookstoves in Rural Malawi. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 51(3), 1929–1938. https://doi.org/10.1021/acs.est.6b05557 Safavizadeh, S. A., & Kim, Y. R. (2017). Fatigue and fracture characterization of fiberglass grid-reinforced beam specimens using four-point bending notched beam fatigue test and digital image correlation technique. MATERIALS AND STRUCTURES, 50(2). https://doi.org/10.1617/s11527-016-0980-8 Wang, C., Castrorena, C., Zhang, J., & Kim, Y. R. (2017). Application of Time-Temperature Superposition Principle on Fatigue Failure Analysis of Asphalt Binder. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 29(1). https://doi.org/10.1061/(asce)mt.1943-5533.0001730 Ali, A. M., Shafiee, M. E., & Berglund, E. Z. (2017). Agent-based modeling to simulate the dynamics of urban water supply: Climate, population growth, and water shortages. Sustainable Cities and Society, 28, 420–434. https://doi.org/10.1016/j.scs.2016.10.001 Jeelani, I., Albert, A., & Gambatese, J. A. (2017). Why Do Construction Hazards Remain Unrecognized at the Work Interface? JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, 143(5). https://doi.org/10.1061/(asce)co.1943-7862.0001274 Albert, A., Hallowell, M. R., Skaggs, M., & Kleiner, B. (2017). Empirical measurement and improvement of hazard recognition skill. SAFETY SCIENCE, 93, 1–8. https://doi.org/10.1016/j.ssci.2016.11.007 Jeelani, I., Albert, A., Azevedo, R., & Jaselskis, E. J. (2017). Development and Testing of a Personalized Hazard-Recognition Training Intervention. JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, 143(5). https://doi.org/10.1061/(asce)co.1943-7862.0001256 Yu, Y., Chen, Z., & Liu, H. (2017). Advanced approaches to calculate recovery length and force redistribution in semi-parallel wire cables with broken wires. ENGINEERING STRUCTURES, 131, 44–56. https://doi.org/10.1016/j.engstruct.2016.10.017 Li, Q., Song, L., List, G. F., Deng, Y., Zhou, Z., & Liu, P. (2017). A new approach to understand metro operation safety by exploring metro operation hazard network (MOHN). SAFETY SCIENCE, 93, 50–61. https://doi.org/10.1016/j.ssci.2016.10.010 Han, K. K., & Golparvar-Fard, M. (2017). Potential of big visual data and building information modeling for construction performance analytics: An exploratory study. AUTOMATION IN CONSTRUCTION, 73, 184–198. https://doi.org/10.1016/j.autcon.2016.11.004 Smyl, D., Rashetnia, R., Seppanen, A., & Pour-Ghaz, M. (2017). Can Electrical Resistance Tomography be used for imaging unsaturated moisture flow in cement-based materials with discrete cracks? CEMENT AND CONCRETE RESEARCH, 91, 61–72. https://doi.org/10.1016/j.cemconres.2016.10.009 Hao, Z., Malyala, D., Dean, L., & Ducoste, J. (2017). Attenuated Total Reflectance Fourier transform infrared spectroscopy for determination of Long Chain Free Fatty Acid concentration in oily wastewater using the double wavenumber extrapolation technique. TALANTA, 165, 526–532. https://doi.org/10.1016/j.talanta.2017.01.006 Fernandes, P., Salamati, K., Rouphail, N. M., & Coelho, M. C. (2017). The effect of a roundabout corridor's design on selecting the optimal crosswalk location: A multi-objective impact analysis. INTERNATIONAL JOURNAL OF SUSTAINABLE TRANSPORTATION, 11(3), 206–220. https://doi.org/10.1080/15568318.2016.1237689 Saha, P. K., Khlystov, A., Yahya, K., Zhang, Y., Xu, L., Ng, N. L., & Grieshop, A. P. (2017). Quantifying the volatility of organic aerosol in the southeastern US. Atmospheric Chemistry and Physics, 17(1), 501–520. https://doi.org/10.5194/acp-17-501-2017 Lunn, D., Lucier, G., Rizkalla, S., Cleland, N., & Gleich, H. (2017). New generation of precast concrete double tees reinforced with carbon-fiber-reinforced polymer grid response. PCI Journal, 90–91. Salomons, E., Skulovich, O., & Ostfeld, A. (2017). Battle of Water Networks DMAs: Multistage Design Approach. JOURNAL OF WATER RESOURCES PLANNING AND MANAGEMENT, 143(10). https://doi.org/10.1061/(asce)wr.1943-5452.0000830