Textile Engineering, Chemistry and Science - 2013 Cui, Y. Z., Zhang, Y., Zhou, L. L., & Yu, F. (2013). Two-Photon Absorption Properties of s-Triazine Derivatives With Near Octupolar Symmetry. AMR, 652-654, 542–545. https://doi.org/10.4028/www.scientific.net/amr.652-654.542 Havenith, G., Bröde, P., den Hartog, E. den, Kuklane, K., Holmer, I., Rossi, R. M., … Wang, X. (2013). Evaporative cooling: effective latent heat of evaporation in relation to evaporation distance from the skin. Journal of Applied Physiology, 114(6), 778–785. https://doi.org/10.1152/japplphysiol.01271.2012 Pourdeyhimi, B., Fedorova, N. V., & Sharp, S. R. (2013). Micro and nanofiber nonwoven spunbonded fabric (Patent No. US8349232B2). Pourdeyhimi, B., Fedorova, N. V., & Sharp, S. R. (2013). High strength, durable micro and nano-fiber fabrics produced by fibrillating bicomponent islands in the sea fibers (Patent No. US8420556B2). Pourdeyhimi, B. (2013). Latest Developments in Nonwovens for Filtration, Keynote address. Keynote address presented at the American Filtration Society, Minnesota. Pourdeyhimi, B. (2013, June). Nonwovens with Stretch and Recovery. Presented at the TechTextil, Frankfurt, Germany. Williams, J., Mohiti-Asli, M., Tuin, S. A., Morgan, D., Kannan, A., Hluck, B., & Loboa, E. G. (2013). Osteochondral Tissue Engineering Using Human Adipose Derived Stem Cells. Proceeding of the 59th Annual Orthopaedic Research Society Conference. Presented at the 59th Annual Orthopaedic Research Society Conference, San Antonio, Texas. Tuin, S. A., Miller, S. M., Ganesh, V., Cunningham, D. J., Pfeiler, W. T., Bernacki, S. H., … Loboa, E. G. (2013). Novel High Surface Area Poly(L-lactic Acid Nonwoven Scaffolds Exposed to Pulsatile Fluid Flow Increase RUNX2 Expression in Human Adipose Derived Stem Cells. Proceedings of the triennial International Engineered Fabrics Conference and Expo. Presented at the Triennial International Engineered Fabrics Conference and Expo, Miami Beach, Florida. Tuin, S. A., Miller, S. M., Cunningham, D. J., Pfeiler, W. T., Bernacki, S. H., Pourdeyhimi, B., & Loboa, E. G. (2013). Winged Fiber Scaffolds Enhance hASC Proliferation, Osteogenesis, and Mechanosensitivity. Proceedings of the Annual Biomedical Engineering Society Conference. Presented at the Annual Biomedical Engineering Society Conference, Seattle, WA. Tuin, S. A., Cunningham, D. J., Pfeiler, W. T., Bernacki, S. H., Pourdeyhimi, B., & Loboa, E. G. (2013). 3-D Computational Modeling of Fluid Flow Over Winged Fibers: Winged Fibers Enhance Shear Stress and RUNX2 Expression in hASC. Proceedings of the 15th Annual North Carolina Tissue Engineering and Regenerative Medicine Society Conference. Presented at the 15th Annual North Carolina Tissue Engineering and Regenerative Medicine Society Conference, Winston-Salem, NC. Tuin, S. A., Cunningham, D. J., Pfeiler, W. T., Bernacki, S. H., Pourdeyhimi, B., & Loboa, E. G. (2013). 3-D Computational Modeling of Fluid Flow Over Winged Fibers: Winged Fibers Enhance Shear Stress and RUNX2 Expression in hASC. Proceedings of the Annual Joint Meeting of the Materials Research Society and the Materials Information Society. Presented at the Annual Joint Meeting of the Materials Research Society and the Materials Information Society, Raleigh, NC. Pourdeyhimi, B., Tafreshi, H., & Maze, B. (2013, May). Micro and Macro Modeling Filtration in Nonwovens. Presented at the Filtrex 2013, Seoul, Korea. Pourdeyhimi, B., Lommel, S. A., Honarbakhsh, S., Carbonell, R., & Guenther, R. H. (2013). Biodegradable non-woven fabric having plant virus encapsulated actives for drug delivery (U.S. Patent No. 8535727). Pourdeyhimi, B. (2013). Lightweight High-Tensile, High-Tear Strength Bicomponent Nonwoven Fabrics (Japan Patent No. 5339896). Pourdeyhimi, B., & Sharp, S. R. (2013). Durable Fabrics Produced by Fibrillating Multilobal Fibers (Europe Patent No. 2,165,010). Pourdeyhimi, B. (2013). High Strength Durable Micro and Nano-Fiber Fabrics Produced by Fibrillating Islands in the Sea Fibers (Korea Patent No. 10-1280398). Pourdeyhimi, B. (2013). High Strength Durable Micro and Nano-Fiber Fabrics Produced by Fibrillating Islands in the Sea Fibers (Japan Patent No. 5266050). Pourdeyhimi, B., Sharp, S. R., & Fedorova, N. (2013). High Strength Durable Micro and Nano-Fiber Fabrics Produced by Fibrillating Islands in the Sea Fibers (Germany Patent No. EP1907201). Pourdeyhimi, B., & Chappas, W. (2013). Composite Filter Media with High Surface Area Fibers (U.S. Patent No. 8,410,006). Tian, D., Li, D. Y., Wang, F. F., Xiao, N., Liu, R. Q., Li, N., … Wu, G. (2013). A Pd-free activation method for electroless nickel deposition on copper. Surface and Coatings Technology, 228, 27–33. https://doi.org/10.1016/J.SURFCOAT.2013.03.048 Song, L., Khoerunnisa, F., Gao, W., Dou, W., Hayashi, T., Kaneko, K., … Ajayan, P. M. (2013). Effect of high-temperature thermal treatment on the structure and adsorption properties of reduced graphene oxide. Carbon, 52, 608–612. https://doi.org/10.1016/j.carbon.2012.09.060 Ford, E. N. J., & Gilbert, Y. V. (2013). Displacement between Orders of Magnitude Method for SI Unit Conversion. Journal of Chemical Education, 90(1), 134–136. https://doi.org/10.1021/ed300006e Tuin, S. A., Pourdeyhimi, B., & Loboa, E. G. (2013). Interconnected, microporous hollow fibers for tissue engineering: Commercially relevant, industry standard scale-up manufacturing. Journal of Biomedical Materials Research Part A, 102(9), 3311–3323. https://doi.org/10.1002/JBMA.35002 Ambesi, D., Kleijn, C. R., den Hartog, E. A., Bouma, R. H. B., & Brasser, P. (2013). Forced convection mass deposition and heat transfer onto a cylinder sheathed by protective garments. AIChE Journal, 60(1), 353–361. https://doi.org/10.1002/AIC.14246 Ambesi, D., Bouma, R., den Hartog, E., & Kleijn, C. R. (2013). Predicting the Chemical Protection Factor of CBRN Protective Garments. Journal of Occupational and Environmental Hygiene, 10(5), 270–276. https://doi.org/10.1080/15459624.2013.769842 Zhu, Y., Douglass, E., Theyson, T., Hogan, R., & Kotek, R. (2013). Cellulose and Soy Proteins Based Membrane Networks. Macromolecular Symposia, 329(1), 70–86. https://doi.org/10.1002/MASY.201300032 Hollowell, K. B., Anantharamaiah, N., & Pourdeyhimi, B. (2013). Hybrid mixed media nonwovens composed of macrofibers and microfibers. Part I: three-layer segmented pie configuration. Journal of the Textile Institute, 104(9), 972–979. https://doi.org/10.1080/00405000.2013.767430 Arambakam, R., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2013). A simple simulation method for designing fibrous insulation materials. Materials & Design, 44, 99–106. https://doi.org/10.1016/j.matdes.2012.07.058 Saleh, A. M., Hosseini, S. A., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2013). 3-D microscale simulation of dust-loading in thin flat-sheet filters: A comparison with 1-D macroscale simulations. Chemical Engineering Science, 99, 284–291. https://doi.org/10.1016/J.CES.2013.06.007 Suragani Venu, L. B., Shim, E., Anantharamaiah, N., & Pourdeyhimi, B. (2013). Impacts of high-speed waterjets on web structures. The Journal of The Textile Institute, 105(4), 430–443. https://doi.org/10.1080/00405000.2013.819613 Amirnasr, E., Shim, E., Yeom, B.-Y., & Pourdeyhimi, B. (2013). Basis weight uniformity analysis in nonwovens. The Journal of The Textile Institute, 105(4), 444–453. https://doi.org/10.1080/00405000.2013.820017 Kilic, A., Shim, E., Pourdeyhimi, B., & Yeom, B.-Y. (2013). Aerosol filtration properties of nucleating agent containing electret filters. Polym Eng Sci, 54(7), 1533–1539. https://doi.org/10.1002/pen.23693 Hyaluronan-Based Three-Dimensional Microenvironment Potently Induces Cardiovascular Progenitor Cell Populations. (2013). ISRN Tissue Engineering. https://doi.org/10.1155/2013/752620 Xue, L. G., Xia, X., Tucker, T., Fu, K., Zhang, S., Li, S. L., & Zhang, X. W. (2013). simple method to encapsulate SnSb nanoparticles into hollow carbon nanofibers with superior lithium-ion storage capability. Journal of Materials Chemistry A, 1. Toprakci, O., Toprakci, H. A. K., Li, Y., Ji, L. W., Xue, L. G., Lee, H., … Zhang, X. W. (2013). Synthesis and characterization of xLi(2)MnO(3) center dot (1-x)LiMn1/3Ni1/3Co1/3O2 composite cathode materials for rechargeable lithium-ion batteries. Journal of Power Sources, 241. Xue, L. G., Fu, K., Li, Y., Xu, G. J., Lu, Y., Zhang, S., … Zhang, X. W. (2013). Si/C composite nanofibers with stable electric conductive network for use as durable lithium-ion battery anode. Nano Energy, 2. Vinueza, N. R., Gallardo, V. A., Klimek, J. F., Carpita, N. C., & Kenttämaa, H. I. (2013). Analysis of carbohydrates by atmospheric pressure chloride anion attachment tandem mass spectrometry. Fuel, 105, 235–246. https://doi.org/10.1016/j.fuel.2012.08.012 Vinueza, N. R., Gallardo, V. A., Klimek, J. F., Carpita, N. C., & Kenttämaa, H. I. (2013). Analysis of xyloglucans by ambient chloride attachment ionization tandem mass spectrometry. Carbohydrate Polymers, 98(1), 1203–1213. https://doi.org/10.1016/j.carbpol.2013.06.070 Hurt, M. R., Degenstein, J. C., Gawecki, P., Borton II, D. J., Vinueza, N. R., Yang, L., … Kenttämaa, H. I. (2013). On-Line Mass Spectrometric Methods for the Determination of the Primary Products of Fast Pyrolysis of Carbohydrates and for Their Gas-Phase Manipulation. Analytical Chemistry, 85(22), 10927–10934. https://doi.org/10.1021/ac402380h Jankiewicz, B. J., Vinueza, N. R., Kirkpatrick, L. M., Gallardo, V. A., Li, G., Nash, J. J., & Kenttämaa, H. I. (2013). Does the 2,6-didehydropyridinium cation exist? Journal of Physical Organic Chemistry, 26(9), 707–714. https://doi.org/10.1002/poc.3120 Kirkpatrick, L. M., Vinueza, N. R., Jankiewicz, B. J., Gallardo, V. A., Archibold, E. F., Nash, J. J., & Kenttämaa, H. I. (2013). Experimental and Computational Studies on the Formation of Threepara-Benzyne Analogues in the Gas Phase. Chemistry - A European Journal, 19(27), 9022–9033. https://doi.org/10.1002/chem.201203264 Gajjar, C. R., McCord, M. G., & King, M. W. (2013). Hemostatic wound dressings. In Biotextiles as Medical Implants (pp. 563–589). https://doi.org/10.1533/9780857095602.2.563 Spontak, R. J., Tallury, S. S., Ghosh, T. K., Pasquinelli, M. A., & Pourdeyhimi, B. (2013). Thermoplastic elastomer systems for stimulated shape change: From electrical actuation to thermal recovery. International Symposium on Fibers Interfacing the World. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84969786883&partnerID=MN8TOARS Gurarslan, A., Pasquinelli, M. A., & Tonelli, A. E. (2013). Combined experimental and simulation approach to tailor the microstructures of polymer materials through inclusion complex formation and subsequent release. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 245. Nawalakhe, R., Shi, Q., Vitchuli, N., Noar, J., Caldwell, J. M., Breidt, F., … McCord, M. G. (2013). Novel atmospheric plasma enhanced chitosan nanofiber/gauze composite wound dressings. Journal of Applied Polymer Science, 129. https://doi.org/https://doi.org/10.1002/app.38804 Shi, Q., Vitchuli, N., Nowak, J., Jiang, S., Caldwell, J. M., Breidt, F., … McCord, M. (2013). Multifunctional and durable nanofiber-fabric-layered composite for protective application. Journal of Applied Polymer Science, 128. https://doi.org/https://doi.org/10.1002/app.38465 Li, S., Fu, K., Xue, L., Toprakci, O., Li, Y., Zhang, S., … Qiao, S. (2013). Co3O4/Carbon Composite Nanofibers for Use as Anode Material in Advanced Lithium-Ion Batteries. Nanotechnology For Sustainable Energy, 1140, 55–66. Novel Nanofibers for Biomedical Textiles. (2013). Joint US EPA-NCSU Interactive Collaboration Forum and Poster Session. Hybrid PEMs Incorporated with Solid Superacidic Nanofibers. (2013). 2013 MRS Spring Meeting & Exhibit. Flexible and Binder-Free Design: Nonwoven Structure Based Si Materials as Anodes for Lithium-Ion Batteries. (2013). The 8th Annual NC State University Graduate Student Research Symposium. Nano in Lithium-Ion Battery. (2013). FREEDM Systems Center Student Research Workshop. High-Power and High-Energy Electrochemical Electrodes and Supercapacitors. (2013). Center for Dielectric Studies 2013 Fall Meeting. Liang, Y., Cheng, S., Zhao, J., Zhang, C., Sun, S., Zhou, N., … Zhang, X. (2013). Heat treatment of electrospun Polyvinylidene fluoride fibrous membrane separators for rechargeable lithium-ion batteries. Journal of Power Sources, 240, 204–211. https://doi.org/10.1016/j.jpowsour.2012.04.011 Fast and Low-Cost Production of Nanofibers by Centrifugal Spinning. (2013). College of Textiles’ Composites Symposium. Aligned Carbon Nanotube-Silicon f Sheets: A Novel Nano-Architecture for Flexible Lithium-ion Battery Electrodes. (2013). North Carolina American Chemical Society’s 127th Sectional Conference. Aligned Carbon Nanotube-Silicon Sheets: A Novel Nano-Architecture for Flexible Lithium-ion Battery Electrodes. (2013). MRS/ASM/AVS/AReMS Meeting. Aligned Carbon Nanotube-Silicon Sheets: A Novel Nano-Architecture for Flexible Lithium-ion Battery Electrodes. (2013). 2013 MRS Fall Meeting & Exhibit. Rasipuram, S. C., Wu, M., Kuznetsov, I. A., Kuznetsov, A. V., Levine, J. F., Jasper, W. J., & Saveliev, A. V. (2013). Submicrometre particle filtration with a dc activated plasma textile. Journal of Physics D: Applied Physics, 47(2), 025201. https://doi.org/10.1088/0022-3727/47/2/025201 Joines, J. A., & Roberts, S. D. (2013). Simulation Modeling with SIMIO: A Workbook (3rd ed.). Simio LLC Sewickley, PA. Viswanath, V., Maity, S., Bochinski, J. R., Clarke, L. I., & Gorga, R. E. (2013). Thermal Annealing of Polymer Nanocomposites via Photothermal Heating: Effects on Crystallinity and Spherulite Morphology. MACROMOLECULES, 46(21), 8596–8607. https://doi.org/10.1021/ma401855v Haslup, J. R. C., Shamey, R., & Hinks, D. (2013). The Effect of Hue on the Perception of Blackness Using Munsell Samples. COLOR RESEARCH AND APPLICATION, 38(6), 423–428. https://doi.org/10.1002/col.21744 Carvelli, V., Pazmino, J., Lomov, S. V., Bogdanovich, A. E., Mungalov, D. D., & Verpoest, I. (2013). Quasi-static and fatigue tensile behavior of a 3D rotary braided carbon/epoxy composite. JOURNAL OF COMPOSITE MATERIALS, 47(25), 3195–3210. https://doi.org/10.1177/0021998312463407 Jasper, S. M., & Jasper, W. J. (2013). Methods and impact of reducing salt in dyeing cellulose: a case study with CI Direct Blue 90. COLORATION TECHNOLOGY, 129(5), 385–388. https://doi.org/10.1111/cote.12042 Fu, S., Hinks, D., Hauser, P., & Ankeny, M. (2013). High efficiency ultra-deep dyeing of cotton via mercerization and cationization. Cellulose, 20(6), 3101–3110. https://doi.org/10.1007/s10570-013-0081-6 Stano, K. L., Chapla, R., Carroll, M., Nowak, J., McCord, M., & Bradford, P. D. (2013). Copper-Encapsulated Vertically Aligned Carbon Nanotube Arrays. ACS Applied Materials & Interfaces, 5(21), 10774–10781. https://doi.org/10.1021/am402964e Wang, Y., Michielsen, S., & Lee, H. J. (2013). Symmetric and Asymmetric Capillary Bridges between a Rough Surface and a Parallel Surface. LANGMUIR, 29(35), 11028–11037. https://doi.org/10.1021/la401324f Avci, H., Monticello, R., & Kotek, R. (2013). Preparation of antibacterial PVA and PEO nanofibers containing Lawsonia Inermis (henna) leaf extracts. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION, 24(16), 1815–1830. https://doi.org/10.1080/09205063.2013.804758 Honarbakhsh, S., Guenther, R. H., Willoughby, J. A., Lommel, S. A., & Pourdeyhimi, B. (2013). Polymeric Systems Incorporating Plant Viral Nanoparticles for Tailored Release of Therapeutics. ADVANCED HEALTHCARE MATERIALS, 2(7), 1001–1007. https://doi.org/10.1002/adhm.201200434 Parsons, G. N., Atanasov, S. E., Dandley, E. C., Devine, C. K., Gong, B., Jur, J. S., … Williams, P. S. (2013). [Review of Mechanisms and reactions during atomic layer deposition on polymers]. COORDINATION CHEMISTRY REVIEWS, 257(23-24), 3323–3331. https://doi.org/10.1016/j.ccr.2013.07.001 El-Shafei, A., Hussain, M., Islam, A., & Han, L. (2013). Influence of cyclic versus acyclic oxygen-containing electron donor ancillary ligands on the photocurrent, photovoltage and photostability for high efficiency dye-sensitized solar cells. Journal of Materials Chemistry A, 1(43), 13679–13686. https://doi.org/10.1039/c3ta12748f Joijode, A. S., Hawkins, K. D., & Tonelli, A. E. (2013). Improving Poly(ethylene terephthalate) Through Self-nucleation. MACROMOLECULAR MATERIALS AND ENGINEERING, 298(11), 1190–1200. https://doi.org/10.1002/mame.201200398 Khansari, S., Duzyer, S., Sinha-Ray, S., Hockenberger, A. S., Yarin, A. L., & Pourdeyhimi, B. (2013). Two-Stage Desorption-Controlled Release of Fluorescent Dye and Vitamin from Solution-Blown and Electrospun Nanofiber Mats Containing Porogens. MOLECULAR PHARMACEUTICS, 10(12), 4509–4526. https://doi.org/10.1021/mp4003442 El-Shafei, A., Islam, A., & Akhtaruzzaman, M. (2013). Functional Dyes. JOURNAL OF CHEMISTRY, Vol. 2013. https://doi.org/10.1155/2013/828910 Fu, K., Yildiz, O., Bhanushali, H., Wang, Y., Stano, K., Xue, L., … Bradford, P. D. (2013). Aligned Carbon Nanotube-Silicon Sheets: A Novel Nano-architecture for Flexible Lithium Ion Battery Electrodes. ADVANCED MATERIALS, 25(36), 5109–5114. https://doi.org/10.1002/adma.201301920 Xue, L., Xia, X., Tucker, T., Fu, K., Zhang, S., Li, S., & Zhang, X. (2013). A simple method to encapsulate SnSb nanoparticles into hollow carbon nanofibers with superior lithium-ion storage capability. JOURNAL OF MATERIALS CHEMISTRY A, 1(44), 13807–13813. https://doi.org/10.1039/c3ta12921g Canbolat, M. F., Gera, N., Tang, C., Monian, B., Rao, B. M., Pourdeyhimi, B., & Khan, S. A. (2013). Preservation of Cell Viability and Protein Conformation on Immobilization within Nanofibers via Electrospinning Functionalized Yeast. ACS APPLIED MATERIALS & INTERFACES, 5(19), 9349–9354. https://doi.org/10.1021/am4022768 Toprakci, H. A. K., Kalanadhabhatla, S. K., Spontak, R. J., & Ghosh, T. K. (2013). Polymer Nanocomposites Containing Carbon Nanofibers as Soft Printable Sensors Exhibiting Strain-Reversible Piezoresistivity. ADVANCED FUNCTIONAL MATERIALS, 23(44), 5536–5542. https://doi.org/10.1002/adfm.201300034 Lu, Y., Li, Y., Zhang, S., Xu, G., Fu, K., Lee, H., & Zhang, X. (2013). Parameter study and characterization for polyacrylonitrile nanofibers fabricated via centrifugal spinning process. EUROPEAN POLYMER JOURNAL, 49(12), 3834–3845. https://doi.org/10.1016/j.eurpolymj.2013.09.017 Grewal, R., & Willoughby, J. A. (2013). Organic surface modifications on silicone elastomers: Impact on moisture vapor permeability and surface energy dynamics. Progress in silicones and silicone-modified materials, 1154, 113–132. https://doi.org/10.1021/bk-2013-1154.ch009 Roman, M. P., Thoppey, N. M., Gorga, R. E., Bochinski, J. R., & Clarke, L. I. (2013). Maximizing Spontaneous Jet Density and Nanofiber Quality in Unconfined Electrospinning: The Role of Interjet Interactions. MACROMOLECULES, 46(18), 7352–7362. https://doi.org/10.1021/ma4013253 Yanilmaz, M., Chen, C., & Zhang, X. (2013). Fabrication and Characterization of SiO2/PVDF Composite Nanofiber-Coated PP Nonwoven Separators for Lithium-Ion Batteries. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 51(23), 1719–1726. https://doi.org/10.1002/polb.23387 Fu, K., Xue, L. G., Yildiz, O., Li, S. L., Lee, H., Li, Y., … al. (2013). Effect of CVD carbon coatings on Si@CNF composite as anode for lithium-ion batteries. NANO ENERGY, 2(5), 976–986. https://doi.org/10.1016/j.nanoen.2013.03.019 Liu, L., Oxenham, W., & Seyam, A. F. M. (2013). Contact electrification of polymeric surfaces. Indian Journal of Fibre & Textile Research, 38(3), 265–269. Farrell, M. J., & Hauser, P. J. (2013). Cationic cotton, reservations to reality (vol 13, pg 56, 2013). AATCC Review, Vol. 13, pp. 19–19. Khansari, S., Sinha-Ray, S., Yarin, A. L., & Pourdeyhimi, B. (2013). Biopolymer-Based Nanofiber Mats and Their Mechanical Characterization. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 52(43), 15104–15113. https://doi.org/10.1021/ie402246x Bradham, A., Thompson, D., Barker, R., Morton-Aslanis, J., & Deaton, A. S. (2013). A method for determining off-gassing of protective fabrics exposed to simulated flash fire conditions. AATCC Review, 13(6), 57–65. Toprakci, O., Toprakci, H. A. K., Li, Y., Ji, L., Xue, L., Lee, H., … Zhang, X. (2013). Synthesis and characterization of xLi(2)MnO(3) center dot (1-x)LiMn1/3Ni1/3Co1/3O2 composite cathode materials for rechargeable lithium-ion batteries. JOURNAL OF POWER SOURCES, 241, 522–528. https://doi.org/10.1016/j.jpowsour.2013.04.155 Wu, Z., Ma, L., Liu, P., Zhou, C., Ning, S., El-Shafei, A., … Hou, X. (2013). Structure-Property Relationship of Amplified Spontaneous Emission in Organic Semiconductor Materials: TPD, DPABP, and NPB. JOURNAL OF PHYSICAL CHEMISTRY A, 117(42), 10903–10911. https://doi.org/10.1021/jp405692c Gurarslan, A., Shen, J., & Tonelli, A. E. (2013). Single-component poly(epsilon-caprolactone) composites. POLYMER, 54(21), 5747–5753. https://doi.org/10.1016/j.polymer.2013.08.017 Sun, Y., Padbury, R. P., Akyildiz, H. I., Goertz, M. P., Palmer, J. A., & Jur, J. S. (2013). Influence of Subsurface Hybrid Material Growth on the Mechanical Properties of Atomic Layer Deposited Thin Films on Polymers. CHEMICAL VAPOR DEPOSITION, 19(4-6), 134–141. https://doi.org/10.1002/cvde.201207042 Halbur, J. C., Padbury, R. P., & Jur, J. S. (2013). Induced wetting of polytetrafluoroethylene by atomic layer deposition for application of aqueous-based nanoparticle inks. MATERIALS LETTERS, 101, 25–28. https://doi.org/10.1016/j.matlet.2013.03.063 Li, Y., Xu, G., Yao, Y., Xue, L., Zhang, S., Lu, Y., … Zhang, X. (2013). Improvement of cyclability of silicon-containing carbon nanofiber anodes for lithium-ion batteries by employing succinic anhydride as an electrolyte additive. JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 17(5), 1393–1399. https://doi.org/10.1007/s10008-013-2005-7 Li, S., Xue, L., Fu, K., Xia, X., Zhao, C., & Zhang, X. (2013). High-performance Sn/Carbon Composite Anodes Derived from Sn(II) Acetate/Polyacrylonitrile Precursors by Electrospinning Technology. CURRENT ORGANIC CHEMISTRY, 17(13), 1448–1454. https://doi.org/10.2174/1385272811317130011 Cao, R., Trussell, H. J., & Shamey, R. (2013). Comparison of the performance of inverse transformation methods from OSA-UCS to CIEXYZ. JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION, 30(8), 1508–1515. https://doi.org/10.1364/josaa.30.001508 Sahu, R. P., Sinha-Ray, S., Yarin, A. L., & Pourdeyhimi, B. (2013). Blowing drops off a filament. Soft Matter, 9(26), 6053. https://doi.org/10.1039/c3sm50618e Stevie, F. A., Maheshwari, P., Pierce, J. M., Adekore, B. T., & Griffis, D. P. (2013, January). SIMS analysis of zinc oxide LED structures: quantification and analysis issues. SURFACE AND INTERFACE ANALYSIS, Vol. 45, pp. 352–355. https://doi.org/10.1002/sia.4919 Bogdanovich, A. E., Karahan, M., Lomov, S. V., & Verpoest, I. (2013). Quasi-static tensile behavior and damage of carbon/epoxy composite reinforced with 3D non-crimp orthogonal woven fabric. MECHANICS OF MATERIALS, 62, 14–31. https://doi.org/10.1016/j.mechmat.2013.03.005 Shim, W. S., & Lee, D. W. (2013). Quality variables of meltblown submicron filter materials. Indian Journal of Fibre & Textile Research, 38(2), 132–137. Varan, N. Y., Gursoy, N. C., King, M. W., & Hauser, P. J. (2013). Novel elastomeric fabrics for burn pressure garments using silver antimicrobial agents. Tekstil Ve Konfeksiyon, 23(1), 38–42. Yilmaz, N. D., Powell, N. B., Banks-Lee, P., & Michielsen, S. (2013). Multi-fiber needle-punched nonwoven composites: Effects of heat treatment on sound absorption performance. JOURNAL OF INDUSTRIAL TEXTILES, 43(2), 231–246. https://doi.org/10.1177/1528083712452899 Mankiewicz, J. L., Godwin, J., Holler, B. L., Turner, P. M., Murashige, R., Shamey, R., … Borski, R. J. (2013). Masculinizing Effect of Background Color and Cortisol in a Flatfish with Environmental Sex-Determination. INTEGRATIVE AND COMPARATIVE BIOLOGY, 53(4), 755–765. https://doi.org/10.1093/icb/ict093 Joijode, A. S., Antony, G. J., & Tonelli, A. E. (2013). Glass-transition temperatures of nanostructured amorphous bulk polymers and their blends. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 51(13), 1041–1050. https://doi.org/10.1002/polb.23306 Mazloumpour, M., Malshe, P., El-Shafei, A., & Hauser, P. (2013). Conferring durable antimicrobial properties on nonwoven polypropylene via plasma-assisted graft polymerization of DADMAC. SURFACE & COATINGS TECHNOLOGY, 224, 1–7. https://doi.org/10.1016/j.surfcoat.2013.02.022 Sweet, W. J., III, Jur, J. S., & Parsons, G. N. (2013). Bi-layer Al2O3/ZnO atomic layer deposition for controllable conductive coatings on polypropylene nonwoven fiber mats. JOURNAL OF APPLIED PHYSICS, 113(19). https://doi.org/10.1063/1.4804960 Yildiz, O., & Bradford, P. D. (2013). Aligned carbon nanotube sheet high efficiency particulate air filters. CARBON, 64, 295–304. https://doi.org/10.1016/j.carbon.2013.07.066 Xue, L., Zhang, S., Li, S., Lu, Y., Toprakci, O., Xia, X., … Zhang, X. (2013). Synthesis and properties of Li2MnO3-based cathode materials for lithium-ion batteries. JOURNAL OF ALLOYS AND COMPOUNDS, 577, 560–563. https://doi.org/10.1016/j.jallcom.2013.07.029 Zhang, M., Gao, B., Li, Y., Zhang, X., & Hardin, I. R. (2013). Graphene-coated pyrogenic carbon as an anode material for lithium battery. CHEMICAL ENGINEERING JOURNAL, 229, 399–403. https://doi.org/10.1016/j.cej.2013.06.025 Aykut, Y., Pourdeyhimi, B., & Khan, S. A. (2013). Effects of surfactants on the microstructures of electrospun polyacrylonitrile nanofibers and their carbonized analogs. JOURNAL OF APPLIED POLYMER SCIENCE, 130(5), 3726–3735. https://doi.org/10.1002/app.39637 Kilic, A., Shim, E., Yeom, B. Y., & Pourdeyhimi, B. (2013). Effect of DMDBS (3: 2, 4-bis(3,4-dimethyldibenzylidene) sorbitol) and NA11 (sodium 2,2-methylene-bis(4,6-di-tertbutylphenyl)-phosphate) on electret properties of polypropylene filaments. JOURNAL OF APPLIED POLYMER SCIENCE, 130(3), 2068–2075. https://doi.org/10.1002/app.39392 Freeman, H. S., Jeong, E., & Claxton, L. D. (2013). Characterization of metabolites of genotoxic 4,4 '-aminoalkoxyazobenzene dyes. DYES AND PIGMENTS, 99(2), 496–501. https://doi.org/10.1016/j.dyepig.2013.06.001 Farrell, M. J., & Hauser, P. J. (2013). Cationic cotton, reservations to reality. AATCC Review, 13(5), 56–63. Freeman, H. S. (2013). Aromatic amines: use in azo dye chemistry. FRONTIERS IN BIOSCIENCE-LANDMARK, 18, 145–164. https://doi.org/10.2741/4093 Abdou, L. A. W., El-Molla, M. M., Hakeim, O. A., El-Gammal, M. S., & Shamey, R. (2013). Synthesis of Nanoscale Binders through Mini Emulsion Polymerization for Textile Pigment Applications. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 52(6), 2195–2200. https://doi.org/10.1021/ie301705u Aykut, Y., Pourdeyhimi, B., & Khan, S. A. (2013). Synthesis and characterization of silver/lithium cobalt oxide (Ag/LiCoO2) nanofibers via sol-gel electrospinning. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 74(11), 1538–1545. https://doi.org/10.1016/j.jpcs.2013.05.021 Fu, K., Xue, L., Yildiz, O., Li, S., Lee, H., Li, Y., … al. (2013). Si/C composite nanofibers with stable electric conductive network for use as durable lithium-ion battery anode. NANO ENERGY, 2(3), 361–367. https://doi.org/10.1016/j.nanoen.2012.11.001 Ramirez, A. L. B., Kean, Z. S., Orlicki, J. A., Champhekar, M., Elsakr, S. M., Krause, W. E., & Craig, S. L. (2013). Mechanochemical strengthening of a synthetic polymer in response to typically destructive shear forces. NATURE CHEMISTRY, 5(9), 757–761. https://doi.org/10.1038/nchem.1720 Liang, Y., Cheng, S., Zhao, J., Zhang, C., Sun, S., Zhou, N., … Zhang, X. (2013). Heat treatment of electrospun Polyvinylidene fluoride fibrous membrane separators for rechargeable lithium-ion batteries. JOURNAL OF POWER SOURCES, 240, 204–211. https://doi.org/10.1016/j.jpowsour.2013.04.019 Avci, H., Kotek, R., & Yoon, J. (2013, November). Developing an ecologically friendly isothermal bath to obtain a new class high-tenacity and high-modulus polypropylene fibers. JOURNAL OF MATERIALS SCIENCE, Vol. 48, pp. 7791–7804. https://doi.org/10.1007/s10853-013-7427-1 Li, S. L., Fu, K., Xue, L. G., Toprakci, O., Li, Y., Zhang, S., … Zhang, X. (2013). Co3O4/carbon composite nanofibers for use as anode material in advanced lithium-ion batteries. Nanotechnology for sustainable energy, 1140, 55–66. https://doi.org/10.1021/bk-2013-1140.ch003 Hubbe, M. A., Rojas, O. J., Fingas, M., & Gupta, B. S. (2013). [Review of Cellulosic substrates for removal of pollutants from aqueous systems: A review. 3. spilled oil and emulsified organic liquids]. BioResources, 8(2), 3038–1179. https://doi.org/10.15376/biores.8.2.3038-3097 Aykut, Y., Pourdeyhimi, B., & Khan, S. A. (2013, November). Catalytic graphitization and formation of macroporous-activated carbon nanofibers from salt-induced and H2S-treated polyacrylonitrile. JOURNAL OF MATERIALS SCIENCE, Vol. 48, pp. 7783–7790. https://doi.org/10.1007/s10853-013-7463-x Wu, M., Jasper, W. J., Kuznetsov, A. V., Johnson, N., & Rasipurarn, S. C. (2013). Submicron particle filtration in monolith filters - A modeling and experimental study. JOURNAL OF AEROSOL SCIENCE, 57, 96–113. https://doi.org/10.1016/j.jaerosci.2012.09.002 Ramamoorthy, A., El-Shafei, A., & Hauser, P. (2013). Plasma Induced Graft Polymerization of C6 Fluorocarbons on Cotton Fabrics for Sustainable Finishing Applications. PLASMA PROCESSES AND POLYMERS, 10(5), 430–443. https://doi.org/10.1002/ppap.201200111 Shi, Q., Vitchuli, N., Nowak, J., Jiang, S., Caldwell, J. M., Breidt, F., … McCord, M. (2013). Multifunctional and Durable Nanofiber-Fabric-Layered Composite for Protective Application. JOURNAL OF APPLIED POLYMER SCIENCE, 128(2), 1219–1226. https://doi.org/10.1002/app.38465 Malshe, P., Mazloumpour, M., El-Shafei, A., & Hauser, P. (2013). Multi-functional military textile: Plasma-induced graft polymerization of a C6 fluorocarbon for repellent treatment on nylon-cotton blend fabric. SURFACE & COATINGS TECHNOLOGY, 217, 112–118. https://doi.org/10.1016/j.surfcoat.2012.11.081 Das, D., Ishtiaque, S. M., Rao, S. V. A., & Pourdeyhimi, B. (2013). Modelling and experimental studies of air permeability of nonuniform nonwoven fibrous porous media. FIBERS AND POLYMERS, 14(3), 494–499. https://doi.org/10.1007/s12221-013-0494-8 Kilic, A., Shim, E., Yeom, B. Y., & Pourdeyhimi, B. (2013). Improving electret properties of PP filaments with barium titanate. JOURNAL OF ELECTROSTATICS, 71(1), 41–47. https://doi.org/10.1016/j.elstat.2012.11.005 Li, Y., Xu, G., Xue, L., Zhang, S., Yao, Y., Lu, Y., … Zhang, X. (2013). Enhanced Rate Capability by Employing Carbon Nanotube-Loaded Electrospun Si/C Composite Nanofibers As Binder-Free Anodes. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 160(3), A528–A534. https://doi.org/10.1149/2.031304jes Vacchi, F. I., Albuquerque, A. F., Vendemiatti, J. A., Morales, D. A., Ormond, A. B., Freeman, H. S., … Umbuzeiro, G. (2013). Chlorine disinfection of dye wastewater: Implications for a commercial azo dye mixture. SCIENCE OF THE TOTAL ENVIRONMENT, 442, 302–309. https://doi.org/10.1016/j.scitotenv.2012.10.019 Xue, L., Xu, G., Li, Y., Li, S., Fu, K., Shi, Q., & Zhang, X. (2013). Carbon-Coated Si Nanoparticles Dispersed in Carbon Nanotube Networks As Anode Material for Lithium-Ion Batteries. ACS APPLIED MATERIALS & INTERFACES, 5(1), 21–25. https://doi.org/10.1021/am3027597 Suvari, F., Ulcay, Y., Maze, B., & Pourdeyhimi, B. (2013). Acoustical absorptive properties of spunbonded nonwovens made from islands-in-the-sea bicomponent filaments. JOURNAL OF THE TEXTILE INSTITUTE, 104(4), 438–445. https://doi.org/10.1080/00405000.2012.740330 Aykut, Y., Parsons, G. N., Pourdeyhimi, B., & Khan, S. A. (2013). Synthesis of Mixed Ceramic MgxZn1-xO Nanofibers via Mg2+ Doping Using Sol-Gel Electrospinning. LANGMUIR, 29(12), 4159–4166. https://doi.org/10.1021/la400281c Fadda, A. A., El-Mekawy, R. E., El-Shafei, A. I., & Freeman, H. (2013). Synthesis and Pharmacological Screening of Novel meso-Substituted Porphyrin Analogs. ARCHIV DER PHARMAZIE, 346(1), 53–61. https://doi.org/10.1002/ardp.201200313 Akhtaruzzaman, M., Menggenbateer, Islam, A., El-Shafei, A., Asao, N., Jin, T., … Yamamoto, Y. (2013). Structure-property relationship of different electron donors: novel organic sensitizers based on fused dithienothiophene pi-conjugated linker for high efficiency dye-sensitized solar cells. TETRAHEDRON, 69(16), 3444–3450. https://doi.org/10.1016/j.tet.2013.02.058 Sinha-Ray, S., Yarin, A. L., & Pourdeyhimi, B. (2013). Prediction of angular and mass distribution in meltblown polymer lay-down. POLYMER, 54(2), 860–872. https://doi.org/10.1016/j.polymer.2012.11.061 Gangadharan, S., Sanghavi, R. S., Kuznetsov, A. V., & Jasper, W. J. (2013). Modeling of Flow Through a Sandwiched Monolith Filter. PARTICULATE SCIENCE AND TECHNOLOGY, 31(3), 226–233. https://doi.org/10.1080/02726351.2012.715614 Lee, H., Alcoutlabi, M., Watson, J. V., & Zhang, X. (2013). Electrospun nanofiber-coated separator membranes for lithium-ion rechargeable batteries. JOURNAL OF APPLIED POLYMER SCIENCE, 129(4), 1939–1951. https://doi.org/10.1002/app.38894 Suh, M., Carroll, K. E., Grant, E., & Oxenham, W. (2013). Effect of fabric substrate and coating material on the quality of conductive printing. JOURNAL OF THE TEXTILE INSTITUTE, 104(2), 213–222. https://doi.org/10.1080/00405000.2012.714107 Cochran, K. H., Barry, J. A., Muddiman, D. C., & Hinks, D. (2013). Direct Analysis of Textile Fabrics and Dyes Using Infrared Matrix-Assisted Laser Desorption Electrospray Ionization Mass Spectrometry. ANALYTICAL CHEMISTRY, 85(2), 831–836. https://doi.org/10.1021/ac302519n Hardrict, S. N., Gurarslan, R., Galvin, C. J., Gracz, H., Roy, D., Sumerlin, B. S., … Tonelli, A. E. (2013). Characterizing polymer macrostructures by identifying and locating microstructures along their chains with the kerr effect. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 51(9), 735–741. https://doi.org/10.1002/polb.23248 Sharp, K., Bogdanovich, A., Boyle, R., Brown, J., & Mungalov, D. (2013). Wind blade joints based on non-crimp 3D orthogonal woven Pi shaped preforms. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 49, 9–17. https://doi.org/10.1016/j.compositesa.2013.01.012 Zhu, S., So, J.-H., Mays, R., Desai, S., Barnes, W. R., Pourdeyhimi, B., & Dickey, M. D. (2013). Ultrastretchable Fibers with Metallic Conductivity Using a Liquid Metal Alloy Core. ADVANCED FUNCTIONAL MATERIALS, 23(18), 2308–2314. https://doi.org/10.1002/adfm.201202405 Xia, X., Li, S., Wang, X., Liu, J., Wei, Q., & Zhang, X. (2013). Structures and properties of SnO2 nanofibers derived from two different polymer intermediates. JOURNAL OF MATERIALS SCIENCE, 48(9), 3378–3385. https://doi.org/10.1007/s10853-012-7122-7 Yildiz, O., Cerkez, I., Kocer, H. B., Worley, S. D., Broughton, R. M., & Huang, T. S. (2013). N-(hydroxymethyl) acrylamide as a multifunctional finish to cotton and a tether for grafting methacrylamide for biocidal coatings. JOURNAL OF APPLIED POLYMER SCIENCE, 128(6), 4405–4410. https://doi.org/10.1002/app.38692 Vargantwar, P. H., Brannock, M. C., Tauer, K., & Spontak, R. J. (2013). Midblock-sulfonated triblock ionomers derived from a long-chain poly[styrene-b-butadiene-b-styrene] triblock copolymer. JOURNAL OF MATERIALS CHEMISTRY A, 1(10), 3430–3439. https://doi.org/10.1039/c2ta00022a Akyildiz, H. I., & Michielsen, S. (2013). Improving water solubility of poly(acrylic acid-co-styrene) copolymers by adding styrene sulfonic acid as a termonomer. JOURNAL OF APPLIED POLYMER SCIENCE, 129(4), 2208–2215. https://doi.org/10.1002/app.38933 Liu, L., Seyam, A. M., & Oxenham, W. (2013). Frictional electrification on polymeric flat surfaces. Journal of Engineered Fibers and Fabrics, 8(1), 126–136. Wang, C., Xu, C., Tian, A., Fu, S., & Wang, C. (2013). Extraction of natural dyes from Alpinia blepharocalyx K. Schum. for dyeing of silk fabric. COLORATION TECHNOLOGY, 129(1), 32–38. https://doi.org/10.1111/j.1478-4408.2012.00407.x Ormond, A. B., & Freeman, H. S. (2013). [Review of Dye Sensitizers for Photodynamic Therapy]. MATERIALS, 6(3), 817–840. https://doi.org/10.3390/ma6030817 Cheema, H. A., El-Shafei, A., & Hauser, P. J. (2013). Conferring flame retardancy on cotton using novel halogen-free flame retardant bifunctional monomers: synthesis, characterizations and applications. Carbohydrate Polymers, 92(1), 885–893. https://doi.org/10.1016/j.carbpol.2012.09.081 Farukh, F., Demirci, E., Sabuncuoglu, B., Acar, M., Pourdeyhimi, B., & Silberschmidt, V. V. (2013, April). Characterisation and numerical modelling of complex deformation behaviour in thermally bonded nonwovens. COMPUTATIONAL MATERIALS SCIENCE, Vol. 71, pp. 165–171. https://doi.org/10.1016/j.commatsci.2013.01.007 Vitchuli, N., Shi, Q., Nowak, J., Nawalakhe, R., Sieber, M., Bourham, M., … McCord, M. (2013). Atmospheric plasma application to improve adhesion of electrospun nanofibers onto protective fabric. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 27(8), 924–938. https://doi.org/10.1080/01694243.2012.727164 Zhang, Y., Lee, M. W., An, S., Sinha-Ray, S., Khansari, S., Joshi, B., … Yarin, A. L. (2013). Antibacterial activity of photocatalytic electrospun titania nanofiber mats and solution-blown soy protein nanofiber mats decorated with silver nanoparticles. CATALYSIS COMMUNICATIONS, 34, 35–40. https://doi.org/10.1016/j.catcom.2013.01.002 Sinha-Ray, S., Lee, M. W., Sinha-Ray, S., An, S., Pourdeyhimi, B., Yoon, S. S., & Yarin, A. L. (2013). Supersonic nanoblowing: a new ultra-stiff phase of nylon 6 in 20-50 nm confinement. JOURNAL OF MATERIALS CHEMISTRY C, 1(21), 3491–3498. https://doi.org/10.1039/c3tc30248b Hussain, M., El-Shafei, A., Islam, A., & Han, L. (2013). Structure-property relationship of extended pi-conjugation of ancillary ligands with and without an electron donor of heteroleptic Ru(II) bipyridyl complexes for high efficiency dye-sensitized solar cells. PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 15(21), 8401–8408. https://doi.org/10.1039/c3cp51260f Lee, H., Alcoutlabi, M., Watson, J. V., & Zhang, X. (2013). Polyvinylidene fluoride-co-chlorotrifluoroethylene and polyvinylidene fluoride-co-hexafluoropropylene nanofiber-coated polypropylene microporous battery separator membranes. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 51(5), 349–357. https://doi.org/10.1002/polb.23216 Nawalakhe, R., Shi, Q., Vitchuli, N., Noar, J., Caldwell, J. M., Breidt, F., … McCord, M. G. (2013). Novel atmospheric plasma enhanced chitosan nanofiber/gauze composite wound dressings. Journal of Applied Polymer Science, 129(2), 916–923. https://doi.org/10.1002/app.38804 Kim, B. H., & Freeman, H. S. (2013). New N-methyl pyrrole and thiophene based D-pi-A systems for dye-sensitized solar cells. DYES AND PIGMENTS, 96(2), 313–318. https://doi.org/10.1016/j.dyepig.2012.09.001 Ormond, A. B., & Freeman, H. S. (2013). Effects of substituents on the photophysical properties of symmetrical porphyrins. DYES AND PIGMENTS, 96(2), 440–448. https://doi.org/10.1016/j.dyepig.2012.09.011 Kim, B. H., & Freeman, H. S. (2013). Effects of bis-carbazole based D-pi-A sensitizers on solar energy capture in DSSCs. PHOTOCHEMICAL & PHOTOBIOLOGICAL SCIENCES, 12(3), 421–431. https://doi.org/10.1039/c2pp25262g Fadda, A. A., El-Mekawy, R. E., El-Shafei, A., Freeman, H. S., Hinks, D., & El-Fedawy, A. (2013). Design, Synthesis, and Pharmacological Screening of Novel Porphyrin Derivatives. JOURNAL OF CHEMISTRY, 2013. https://doi.org/10.1155/2013/340230 Li, Y., Guo, B., Ji, L., Lin, Z., Xu, G., Liang, Y., … Zhang, X. (2013). Structure control and performance improvement of carbon nanofibers containing a dispersion of silicon nanoparticles for energy storage. CARBON, 51, 185–194. https://doi.org/10.1016/j.carbon.2012.08.027 Alcoutlabi, M., Lee, H., Watson, J. V., & Zhang, X. (2013). Preparation and properties of nanofiber-coated composite membranes as battery separators via electrospinning. JOURNAL OF MATERIALS SCIENCE, 48(6), 2690–2700. https://doi.org/10.1007/s10853-012-7064-0 Farukh, F., Demirci, E., Acar, M., Pourdeyhimi, B., & Silberschmidt, V. V. (2013). Meso-scale deformation and damage in thermally bonded nonwovens. JOURNAL OF MATERIALS SCIENCE, 48(6), 2334–2345. https://doi.org/10.1007/s10853-012-7013-y Aykut, Y. (2013). Electrospun MgO-loaded carbon nanofibers: Enhanced field electron emission from the fibers in vacuum. Journal of Physics and Chemistry of Solids, 74(2), 328–337. Hassan, M. A., Yeom, B. Y., Wilkie, A., Pourdeyhimi, B., & Khan, S. A. (2013). Fabrication of nanofiber meltblown membranes and their filtration properties. JOURNAL OF MEMBRANE SCIENCE, 427, 336–344. https://doi.org/10.1016/j.memsci.2012.09.050