Textile Engineering, Chemistry and Science - 2002 Grady, P. L., Jasper, W. J., & Hodge, G. L. (2002). Communications/network standards in the textile industry. Presented at the 1995 IEEE Annual Textile, Fiber and Film Industry Technical Conference. https://doi.org/10.1109/texcon.1995.471074 Jasper, W. J., & Reddy, M. Y. (2002). Real-time system for data acquisition and control of batch dyeing. Presented at the 1994 IEEE/IAS Annual Textile, Fiber and Film Industry Technical Conference. https://doi.org/10.1109/texcon.1994.320732 DenHartog, E. A., & Reffeltrath, P. A. (2002). Ademen met overdruk tijdens inspanning = Positive pressure breathing during exercise (No. TNO-TM - 02 - A061). DenHartog, E. A., & Brandsma, M. G. (2002). Presteren in de warmte - Literatuurstudie = Performance in the heat – Literature Survey (No. TNO-TM - 02 - C049). Kistemaker, J. A., Tan, T. K., & DenHartog, E. A. (2002). Thermische aspecten van twee modulaire slaapzakken en een enkele slaapzak in extreme kou = Thermal aspects of two modular sleeping bags and a single sleeping bag in extreme cold (No. TNO-TM - 02 - A060). Reffeltrath, P. A., Daanen, H. A. M., & DenHartog, E. A. (2002). Effecten van over de torso geblazen lucht op de warmtebalans en prestatie van helikoptervliegers = Effects of air blown over the torso on heat balance and performance of helicopter flyers (No. TNO-TM - 02 - A026). Malchaire, J., Geng, Q., Den Hartog, E., Havenith, G., Holmer, I., Piette, A., … Rissanen, S. (2002). Temperature limit values for gripping cold surfaces. Annals of Occupational Hygiene, 46(2), 157–163. https://doi.org/10.1093/annhyg/mef032 Pourdeyhimi, B. (2002, October). New Directions in Nonwovens Technology, American Fiber Manufacturers. Presented at the American Fiber Manufacturers’ Association, Greenville, SC. Tafreshi, H., & Pourdeyhimi, B. (2002). Numerical Simulation of Hydroentangling Orifice Flow. Presented at the Fiber Society, Natick, MA. Pasquinelli, M. A. (2002). An Effective Particle Approach to the Photophysics of Conjugated Polymers. Ph. D. Thesis, Carnegie Mellon University. Wang, C., Zhang, X., Appleby, A. J., Chen, X., & Little, F. E. (2002). Self-discharge of secondary lithium-ion graphite anodes. Journal of Power Sources, 112. https://doi.org/https://doi.org/10.1016/s0378-7753(02)00359-2 Zhang, X., Pan, Y., Zheng, Q., & Yi, X. S. (2002). Polystyrene/Sn-Pb alloy blends. II: Effect of alloy particle surface treatment on dynamic rheological behavior. Journal of Applied Polymer Science, 86. https://doi.org/https://doi.org/10.1002/app.11352 Zheng, Q., Zhang, X., Pan, Y., & Yi, X. S. (2002). Polystyrene/Sn-Pb alloy blends. I: Dynamic rheological behavior. Journal of Applied Polymer Science, 86. https://doi.org/https://doi.org/10.1002/app.11353 Liu, J., Pan, Y., & Zhang, X.-W. (2002). PTC Characteristic of Sn-Pb Alloy-Loaded Polymer Composites. Acta Mater. Comp. Sinica, 19, 116–119. Zhang, X., Wang, C., Appleby, A. J., & Little, F. E. (2002). Influence of ionic conductive ceramic fillers on the electrochemical performance of nano-tin anodes in lithium-ion batteries. Zhang, X., Wang, C., Appleby, A. J., & Little, F. E. (2002). Improvement in electrochemical properties of nano-tin-polyaniline lithium-ion composite anodes by control of electrode microstructure. Journal of Power Sources, 109. https://doi.org/https://doi.org/10.1016/s0378-7753(02)00091-5 Zhang, X., Wang, C., Appleby, A. J., & Little, F. E. (2002). Composite doped emeraldine-polyethylene oxide-bonded lithium-ion nano-tin anodes with electronic-ionic mixed conduction. Solid State Ionics, 150. https://doi.org/https://doi.org/10.1016/s0167-2738(02)00522-2 Zhang, X., Wang, C., Appleby, A. J., & Little, F. E. (2002). Characteristics of lithium-ion conducting composite polymer-glass secondary cell electrolytes. Journal of Power Sources, 112. https://doi.org/https://doi.org/10.1016/s0378-7753(02)00365-8 Lertworasirikul, S., Fang, S. C., Nuttle, H. L. W., & Joines, J. A. (2002). Fuzzy data envelopment analysis. Proceedings of the 9th Bellman Continuum, Beijing, 342. Melton, R., Culbreth, C. T., J.A., J., & Roberts, S. D. (2002). Design and Analysis of Furniture Finishing Systems. Forest Products Journal, 52(7-8), 27–33. Lertworasirikul, S., Fang, S.-C., Joines, J. A., & Nuttle, H. L. (2002). A Possibility Approach to Fuzzy Data Envelopment Analysis. 8th International Conference on Fuzzy Theory and Technology. Durham, N.C. Batra, S. K., & Brookstien, D. (2002). Rethinking the US "textile industry". 2nd AUTEX Conference: Textile engineering at the dawn of a new millenium: an exciting challenge, Crowne Plaza Hotel, Bruges, Belgium, 1-3 July 2002. Barker, R. L., & Guerth-Schacher, C. (2002). Moisture absorption in advanced heat resistant clothing systems. 2nd AUTEX Conference: Textile engineering at the dawn of a new millenium: an exciting challenge, Crowne Plaza Hotel, Bruges, Belgium, 1-3 July 2002, 439–450. Zhang, X., Wang, C., Appleby, A. J., & Little, F. E. (2002). Influence of ionic conductive ceramic fillers on the electrochemical performance of nano-tin anodes in lithium-ion batteries. Selected papers presented at the 11th Internaional Meeting on Lithium Batteries, Monterey, CA, USA, 22-28 June 2002. Amsterdam : Elsevier. Bauer-Kurz I., & Schiffler, D. A. (2002). Characterization of single fiber crimp using fiber load-extension behavior. Conference proceedings: Joint INDA-TAPPI Conference, INTC 2002, International Nonwovens Technical Conference, September 24-26, 2002, Renaissance Waverly Hotel, Atlanta, Georgia., 1–10. Atlanta, Ga. : TAPPI. King, M. W., Jones, A. D., Wall, M., Zhanel, G. G., Gonzales, J., Perreault, H., & Shalaby, S. W. (2002). The performance of resorbable antibiotic coatings on braided surgical sutures. 2nd AUTEX Conference: Textile engineering at the dawn of a new millenium: an exciting challenge, Crowne Plaza Hotel, Bruges, Belgium, 1-3 July 2002. Pourdeyhimi, B., & Kim, H. S. (2002). Modeling in-plane fluid transport in nonwovens. Conference proceedings: Joint INDA-TAPPI Conference, INTC 2002, International Nonwovens Technical Conference, September 24-26, 2002, Renaissance Waverly Hotel, Atlanta, Georgia. Atlanta, Ga. : TAPPI. Zhang, X. W., Wang, C. S., Appleby, A. J., & Little, F. E. (2002). Composite doped emeraldine-polyethylene oxide-bonded lithium-ion nano-tin anodes with electronic-ionic mixed conduction. SOLID STATE IONICS, 150(3-4), 383–389. https://doi.org/10.1016/s0167-2738(02)00522-2 McCord, M. G., Hwang, Y. J., & Qiu, Y. (2002). Atmospheric pressure plasma modification of textile surfaces: Nylon 66, polypropylene, and ultra high modulus polyethylene. 2nd AUTEX Conference: Textile engineering at the dawn of a new millenium: an exciting challenge, Crowne Plaza Hotel, Bruges, Belgium, 1-3 July 2002. Ghosh, T. K., & LePechoux, B. (2002). Apparel sizing and fit. Textile Progress, 32(1). Tafreshi, H., & Pourdeyhimi, B. (2002). Numerical investigation of the waterjets issued by hydroentangling orifice nozzles. Conference proceedings : Joint INDA-TAPPI Conference, INTC 2002, International Nonwovens Technical Conference, September 24-26, 2002, Renaissance Waverly Hotel, Atlanta, Georgia. Cary, N.C. : INDA, Association of the Nonwoven Fabrics Industry. Lu, J., Mirau, P. A., & Nojima, S. (2002). NMR studies of the dynamics of homo- and block-co-polymer poly(epsilon-caprolactone) chains in their inclusion compounds with alpha- and gamma-CDs. ACS Symposium Series, 834. https://doi.org/10.1021/bk-2003-0834.ch004 Guidoin, R., Douville, Y., Marois, Y., Dionne, G., Guillemot, F., Zhang, Z., … al. (2002). La chirurgie vasculaire avec effraction tissulaire minimale pour l'exclusion d'anevrisme: Interets et limites des essais chez l'animal. ITBM RBM (Online), 23, 212–234. https://doi.org/10.1016/s1297-9562(02)80028-6 Pourdeyhimi, B. (2002). Bicomponent Fibers and Their Applications. 3rd International Conference on Safety & Protective Fabrics conference proceedings : innovative textile and material developments for safety and protection. Presented at the Industrial Fabrics Association, Charlotte, NC. Dattilo, P. P., King, M. W., Leung, J. C., & Ruff, G. L. (2002). Barbed bi-directional surgical sutures. Advanced materials for biomedical applications = Mate?riaux de pointe pour applications biome?dicales : proceedings of the International Symposium on Advanced Materials for Biomedical Applications (SAMBA), August 11-14, 2002, Montre?al, Que?bec, Canada. Montreal : Canadian Institute of Mining, Metallurgy and Petroleum. Wang, D., Mousavi, P., Grant, S. C., Hauser, P. J., & Oxenham, W. (2002). Monitoring thermal stability of textile processing aids using a quartz crystal microbalance. In C.C. Liu & H. B. Martin (Eds.), Proceedings of the Topical Conference on Sensor Technology : 2002 AICHE Annual Meeting, Indianapolis, Nov. 3 - 8 (pp. 74–79). New York, NY: AIChE. King, M., & Pourdeyhimi, B. (2002). Functional textile materials I - medical materials. Journal of Applied Polymer Science, 83(3). Wang, D., Mousavi, P., Grant, S. C., Hauser, P. J., Oxenham, W., Martin, T., & Davis, R. (2002). Evaluating thermal degradation of textile finishing aids using GC and QCM. Proceedings of the 2002 National Conference on Environmental Science and Technology : Greensboro, North Carolina, September 8-10, 2002, 243–251. Columbus, Ohio: Battelle Press. Oxenham, W. (2002). Current and future trends in yarn production. Through the eye of a needle, advances in fibre, fashion and fabric : Textile Institute 82nd World Conference : 23 to 27th March, 2002, Cairo International Conference Centre, 1–8. Manchester, England: Textile Institute. Joines, J., & Kay, M. G. (2002). 2002 hybrid genetic algorithms and random linkage. CEC'02 : proceedings of the 2002 Congress on Evolutionary Computation : May 12-17, 2002, Hilton Hawaiian Village Hotel, Honolulu, Hawaii. https://doi.org/10.1109/cec.2002.1004504 Thoney, K. A., Hodgson, T. J., Joines, J. A., & Maninagarajan, P. (2002). Rolling horizon scheduling of large job shops. Proceedings of the 2002 Winter Simulation Conference: Manchester Grand Hyatt San Diego, San Diego, CA, U.S.A., December 8-11, 2002. https://doi.org/10.1109/wsc.2002.1166485 Barker, R. L., Guerth-Schacher, C., Hamouda, H., & Grimes, R. (2002). Moisture effects on the thermal protective performance of firefighter turnout suits. Textile Technology Forum: October 23, 2002, proceedings 2002, IFAI Expo 2002, October 24-26, 2002, Charlotte, N.C. USA. Roseville, MN: Industrial Fabrics Association International. Mock, G. (2002). Finishing roundup. Textile World (New York, N.Y.), 152(3). Deaton, A. S., Barker, R., & Thompson, D. (2002). An advanced sweating manikin for measuring the heat stress of protective clothing. Textile Technology Forum: October 23, 2002, proceedings 2002, IFAI Expo 2002, October 24-26, 2002, Charlotte, N.C. USA. Roseville, MN: Industrial Fabrics Association International. Mahmoudi, M. R. (2002). A new electro-mechanical method for measuring yarn thickness. AUTEX Research Journal, 2/1. Berkalp, O., Seyam, A. M., & Pourdeyhimi, B. (2002). Texture evolution in hydroentangled nonwovens. INTC 2002: International Nonwovens Technical Conference: conference proceedings: September 24-26, 2002, Renaissance Waverly Hotel, Atlanta, Georgia. Atlanta, Ga.: Tappi Press. Gupta, B. S., & Smith, K. K. (2002). Nonwovens in absorbent materials. In P.K. Chatterjee & B. S. Gupta (Eds.), Absorbent technology (pp. 349–388). https://doi.org/10.1016/s0920-4083(02)80013-5 Gupta, B. S., & Chatterjee, P. K. (2002). Measurement techniques for absorbent materials and products. In P.K. Chatterjee & B. S. Gupta (Eds.), Absorbent technology (pp. 389–446). https://doi.org/10.1016/s0920-4083(02)80014-7 Gupta, B. S. (2002). Fluid absorption in high bulk nonwovens. In P.K. Chatterjee & B. S. Gupta (Eds.), Absorbent technology (pp. 93–128). https://doi.org/10.1016/s0920-4083(02)80006-8 Chatterjee, P. K., & Gupta, B. S. (2002). Absorbent technology. Amsterdam: Elsevier Science. Mock, G. N. (2002). The textile dye industry in United States. Review of Progress in Coloration and Related Topics, 32, 80–87. https://doi.org/10.1111/j.1478-4408.2002.tb00252.x Begenir, A., Tafreshi, H. V., & Pourdeyhimi, B. (2002). The role of orifice design in hydroentanglement. Conference proceedings: Joint INDA-TAPPI Conference, INTC 2002, International Nonwovens Technical Conference, September 24-26, 2002, Renaissance Waverly Hotel, Atlanta, Georgia. Cary, N.C.: INDA. Mock, G. N. (2002). Quality advances. Textile World (New York, N.Y.), 152(10), 46–49. Mock, G. N. (2002). Out of control? Textile World (New York, N.Y.), 152(4), 44–47. Mock, G. N. (2002). Getting it right the first time. Textile World (New York, N.Y.), 152(6), 58–60. Barker, R. L. (2002). From fabric hand to thermal comfort: The evolving role of objective measurement in explaining human comfort response to textiles. International Journal of Clothing Science and Technology, 4, 181–200. https://doi.org/10.1108/09556220210437158 Melton, R., Culbreth, C. T., Joines, J. A., & Roberts, S. D. (2002). Design and analysis of furniture finishing systems. Forest Products Journal, 52(7-8), 27–33. Michielsen, S. (2002). The fracture toughness of single nylon 6,6 fibres. Journal of Materials Science Letters, 11, 982–984. Michielsen, S., & Wang, X. (2002). Rapid morphology (property) changes at bond edge in thermal point bonded nonwovens. International Nonwovens Journal, 11(2), 35–38. Dodd, E. L. (2002). Outlook for the U.S. short staple yarn industry. Journal of Textile and Apparel Technology and Management, 2(3), 1–8. Wang, X., & Michielsen, S. (2002). Morphology gradients in thermally point-bonded poly(ethylene terephthalate) nonwovens. Textile Research Journal, 72(5), 394–398. https://doi.org/10.1177/004051750207200504 Tobiesen, F. A., & Michielsen, S. (2002). Method for grafting poly(acrylic acid) onto nylon 6,6 using amine end groups on nylon surface. JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 40(5), 719–728. https://doi.org/10.1002/pola.10149 Konopka, A., Kim, H. S., & Pourdeyhimi, B. (2002). In-plane liquid distribution of nonwoven fabrics: part 1. International Nonwovens Journal, 11(4). McFarland, E. G., Carr, W. W., & Michielsen, S. (2002). Determining diffusion and convective mass transfer coefficients in dyeing a thin flat film. TEXTILE RESEARCH JOURNAL, 72(9), 756–763. https://doi.org/10.1177/004051750207200902 Yang, S. Y., & Michielsen, S. (2002). Determination of the orientation parameters and the Raman tensor of the 998 cm(-1) band of poly(ethylene terephthalate). Macromolecules, 35(27), 10108–10113. https://doi.org/10.1021/ma0206568 Bordi, F., Cametti, C., Tan, J. S., Boris, D. C., Krause, W. E., Plucktaveesak, N., & Colby, R. H. (2002). Determination of polyelectrolyte charge and interaction with water using dielectric spectroscopy. MACROMOLECULES, 35(18), 7031–7038. https://doi.org/10.1021/ma020116a Oxenham, W. (2002). Current and future trend in yarn production. Journal of Textile and Apparel Technology and Management, 2(2), 1–10. Kim, H. S., & Pourdeyhimi, B. (2002). Automatic characterization of refractive index profile of fibers by interferometry. International Nonwovens Journal, 11(1). McCord, M., Hwang, Y. J., Qiu, Y., Canup, L. K., & Bourham, M. A. (2002). Surface analysis of cotton fabrics fluorinated in atmospheric plasma. Journal of Applied Polymer Science, 86. Yang, Y. Q., Brown, H., & Li, S. Q. (2002). Some sorption characteristics of poly(trimethylene terephthalate) with disperse dyes. JOURNAL OF APPLIED POLYMER SCIENCE, 86(1), 223–229. https://doi.org/10.1002/app.10953 Gorga, R. E., & Narasimhan, B. (2002). Relating fracture energy to entanglements at partially miscible polymer interfaces. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 40(19), 2292–2302. https://doi.org/10.1002/polb.10285 Gorga, R. E., Jablonski, E. L., Thiyagarajan, P., Seifert, S., & Narasimhan, B. (2002). Quantifying phase behavior in partially miscible polystyrene/poly (styrene-co-4-bromostyrene) blends. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 40(3), 255–271. https://doi.org/10.1002/polb.10090 Hauser, P. (2002). Plasma treatment of textiles: Changing fiber surfaces. Journal of Textile and Apparel Technology and Management, 2(2). Yang, Y., Li, S., Brown, H., & Casey, P. (2002). Dyeing of PTT/PET blends. AATCC Review, 2(8), 54–59. Hauser, P., & Tabba, A. H. (2002). Dyeing cotton with fiber reactive dyes: Effect of reactive chemistries. AATCC Review, 2(5), 53–56. Park, J. O., Rene, C. R., Srinivasarao, M., Doucet, G., & Russo, P. (2002). Study of dye diffusion in nylon 66 fibers: Fluorescence recovery after photobleaching. Macromolecules, 35. Wei, M., & Shuai, X. (2002). Large-scale ordered spherulitic morphology of poly(e-caprolactone)-b-poly(l-lactide) diblock copolymers. Macromolecular Rapid Communications, 23. Wei, M., & Shuai, X. (2002). Biodegradable polymers enzymatically coalesced from their cyclodextrin inclusion complexes. II. Non-isothermal crystallization. Macromolecules, 35. Wei, M., & Shuai, X. (2002). Biodegradable polymers enzymatically coalesced from their cyclodextrin inclusion complexes, I. Melting behavior and isothermal crystallizatioin. Macromolecules, 35. Tonelli, A. E. (2002). A professor's duty. Chemical & Engineering News, 80(44). Wang, C. S., Zhang, X. W., Appleby, A. J., Chen, X. L., & Little, F. E. (2002). Self-discharge of secondary lithium-ion graphite anodes. JOURNAL OF POWER SOURCES, 112(1), 98–104. https://doi.org/10.1016/S0378-7753(02)00359-2 Zhang, X. W., Pan, Y., Zheng, Q., & Yi, X. S. (2002). Polystyrene/Sn-Pb alloy blends. II. Effect of alloy particle surface treatment on dynamic rheological behavior. JOURNAL OF APPLIED POLYMER SCIENCE, 86(12), 3173–3179. https://doi.org/10.1002/app.11352 Zheng, Q., Zhang, X. W., Pan, Y., & Yi, X. S. (2002). Polystyrene/Sn-Pb alloy blends. I. Dynamic rheological behavior. JOURNAL OF APPLIED POLYMER SCIENCE, 86(12), 3166–3172. https://doi.org/10.1002/app.11353 Zhang, X. W., Wang, C. S., Appleby, A. J., & Little, F. E. (2002). Improvement in electrochemical properties of nano-tin-polyaniline lithium-ion composite anodes by control of electrode microstructure. JOURNAL OF POWER SOURCES, 109(1), 136–141. https://doi.org/10.1016/S0378-7753(02)00091-5 Godfrey, A. B., & Clapp, T. (2002). Design for Six Sigma versus traditional new product development: Just hype or fundamentally different? Journal of Textile and Apparel Technology and Management, 2(2). Zhang, X. W., Wang, C. S., Appleby, A. J., & Little, F. E. (2002). Characteristics of lithium-ion-conducting composite polymer-glass secondary cell electrolytes. JOURNAL OF POWER SOURCES, 112(1), 209–215. https://doi.org/10.1016/S0378-7753(02)00365-8 Mohammadi, M., Banks-Lee, P., & Ghadimi, P. (2002). Air permeability of multi-layered nonwoven fabrics: Theoritical method. Journal of Industrial Textiles, 32(1), 45–57. https://doi.org/10.1106/152808302031065 Mohhammadi, M., Banks-Lee, P., & Ghadimi, P. (2002). Air permeability of multi-layered nonwoven fabrics: Experimental method. Journal of Industrial Textiles, 32(2), 139–150. https://doi.org/10.1106/152808302031161 Dattilo, P. P., King, M. W., Cassill, N. L., & Leung, J. C. (2002). Medical textiles: Application of an absorbable barbed bi-directional surgical suture. Journal of Textile and Apparel Technology and Management, 2(2), 1–5. Smith, B. (2002). A comparison of vapor pressure measurement of quinizarin and leuco-quinizarin via transportation and thermo-gravimetric methods. Coloration Technology, 119. https://doi.org/10.1111/j.1478-4408.2003.tb00155.x Uncu, S., Hodge, G. L., Jones, M. R., & Oxenham, W. (2002). Analysis of the current approaches to international plan location selection. Proceedings of the IFFTI International Conference, Hong Kong, November 2002. [Hong Kong: Institute of Textiles and Clothing, the Hong Kong Polytechnic University]. Hodge, G. L. (2002). Enterprise resource planning in textiles. Journal of Textile and Apparel, Technology and Management, 2(3). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33846189624&partnerID=MN8TOARS Hodge, G. L. (2002). Book review: Decision analysis & decision making with Excel. Engineering Economist, 46(3), 243–244. Huang, W. S., & Ghosh, T. K. (2002). Online characterization of fabric compressional behavior. TEXTILE RESEARCH JOURNAL, 72(2), 103–112. https://doi.org/10.1177/004051750207200203 Bae, J. S., & Freeman, H. S. (2002). Synthesis and evaluation of non-genotoxic direct dyes. FIBERS AND POLYMERS, 3(4), 140–146. https://doi.org/10.1007/BF02912658 Rusa, C. C., Bullions, T. A., Fox, J., Porbeni, F. E., Wang, X. W., & Tonelli, A. E. (2002). Inclusion compound formation with a new columnar cyclodextrin host. LANGMUIR, 18(25), 10016–10023. https://doi.org/10.1021/la0262452 Gonzalez, J. C., Silva, M. I. N., Griffis, D. P., & Russell, P. E. (2002). Improvements in focused ion beam micromachining of interconnect materials. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, Vol. 20, pp. 2700–2704. https://doi.org/10.1116/1.1515310 Bae, J. S., & Freeman, H. S. (2002). Copper salts in the post-metallization of non-genotoxic direct dyes. FIBERS AND POLYMERS, 3(4), 147–152. https://doi.org/10.1007/BF02912659 Ghosh, T. K. (2002). Apparatus and method for biaxial tensile testing of membrane materials. Washington, DC: U.S. Patent and Trademark Office. Cai, Z. S., Hwang, Y. J., Park, Y. C., Zhang, C. Y., McCord, M., & Qiu, Y. P. (2002). Preliminary investigation of atmospheric pressure plasma-aided desizing for cotton fabrics. AATCC Review, 2(12), 18–21. Pourdeyhimi, B., & Kim, H. S. (2002). Measuring fiber orientation in nonwovens: The Hough transform. TEXTILE RESEARCH JOURNAL, 72(9), 803–809. https://doi.org/10.1177/004051750207200909 Kim, H. S., Pourdeyhimi, B., Abhiraman, A. S., & Desai, P. (2002). Effect of bonding temperature on load-deformation structural changes in point-bonded nonwoven fabrics. TEXTILE RESEARCH JOURNAL, 72(7), 645–653. https://doi.org/10.1177/004051750207200713 Qiu, Y., Wang, Y., Laton, M., & Mi, J. Z. (2002). Analysis of energy dissipation in twisted fiber bundles under cyclic tensile loading. Textile Research Journal, 72(7), 585–593. https://doi.org/10.1177/004051750207200705 Mohammadi, M., & Banks-Lee, P. (2002). Air permeability of multilayered nonwoven fabrics: Comparison of experimental and theoretical results. TEXTILE RESEARCH JOURNAL, 72(7), 613–617. https://doi.org/10.1177/004051750207200708 Gong, G. L., Gao, X., Wang, J. L., Zhao, D. F., & Freeman, H. S. (2002). Trisazo direct black dyes based on nonmutagenic 3,3 '-disubstituted benzidines. DYES AND PIGMENTS, 53(2), 109–117. https://doi.org/10.1016/S0143-7208(02)00010-4 Hooker, J., Hinks, D., Montero, G., & Conlee, C. (2002). Synthesis of N,N-diethyl-N-{4-[(E)-(4- nitrophenyl)diazenyl]phenyl}amine via in situ diazotisation and coupling in supercritical carbon dioxide. Coloration Technology, 118(6), 273–276. https://doi.org/10.1111/j.1478-4408.2002.tb00110.x Tonelli, A. E. (2002). Conformational characteristics of poly(ethylene phthalate)s. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 40(12), 1254–1260. https://doi.org/10.1002/polb.10189 Qiu, Y., Hwang, Y. J., Zhang, C., Bures, B. L., & McCord, M. (2002). Atmospheric pressure helium plus oxygen plasma treatment of ultrahigh modulus polyethylene fibers. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 16(4), 449–457. https://doi.org/10.1163/156856102760067217 Smith, B. (2002). Using rubber-elastic material-ideal gas analogies to teach introductory thermodynamics Part II: The laws of thermodynamics. JOURNAL OF CHEMICAL EDUCATION, 79(12), 1453–1461. https://doi.org/10.1021/ed079p1453 Smith, B. (2002). Using rubber-elastic material-ideal gas analogies to teach introductory thermodynamics Part I: Equations of state. JOURNAL OF CHEMICAL EDUCATION, 79(12), 1444–1452. https://doi.org/10.1021/ed079p1444 Farer, R., Seyam, A. M., Ghosh, T. K., Grant, E., & Batra, S. K. (2002). Meltblown structures formed by a robotic and meltblowing integrated system: Impact of process parameters on fiber orientation and diameter distribution. TEXTILE RESEARCH JOURNAL, 72(12), 1033–1040. https://doi.org/10.1177/004051750207201201 Wei, M., Davis, W., Urban, B., Song, Y. Q., Porbeni, F. E., Wang, X. W., … Tonelli, A. E. (2002). Manipulation of nylon-6 crystal structures with its alpha-cyclodextrin inclusion complex. MACROMOLECULES, 35(21), 8039–8044. https://doi.org/10.1021/ma020765m Shuai, X. T., Porbeni, F. E., Wei, M., Bullions, T., & Tonelli, A. E. (2002). Inclusion complex formation between alpha,gamma-cyclodextrins and a triblock copolymer and the cyclodextrin-type-dependent microphase structures of their coalesced samples. MACROMOLECULES, 35(6), 2401–2405. https://doi.org/10.1021/ma012085+ Ramanath, A. R., Snyder, B. W., & Hinks, C. D. (2002). Image comparison measure for digital still color cameras. In 2002 International Conference on Image Processing: proceedings: ICIP: 22-25 September, 2002, Rochester Riverside Convention Center, Rochester, New York, USA: Vol. 1 (Vol. 1, pp. 629–632). Piscataway, NJ: IEEE. Draper, S. L., Beck, K. R., Smith, C. B., & Hauser, P. J. (2002). Characterization of the dyeing behavior of cationic cotton with direct dyes. AATCC Review, 2(10), 24–27. Pourdeyhimi, B., & Kohel, L. (2002). Area-based strategy for determining web uniformity. TEXTILE RESEARCH JOURNAL, 72(12), 1065–1072. https://doi.org/10.1177/004051750207201205 Shuai, X. T., Wei, M., Porbeni, F. E., Bullions, T. A., & Tonelli, A. E. (2002). Formation of and coalescence from the inclusion complex of a biodegradable block copolymer and alpha-cyclodextrin. 2: A novel way to regulate the biodegradation behavior of biodegradable block copolymers. BIOMACROMOLECULES, 3(1), 201–207. https://doi.org/10.1021/bm015609m Melton, R. H., Culbreth, C. T., Roberts, S. D., & Joines, J. A. (2002). Design and evaluation of furniture finishing systems. Forest Products Journal, 52(7/8), 27. Rusa, C. C., Luca, C., Tonelli, A. E., & Rusa, M. (2002). Structural investigations of the poly(epsilon-caprolactam)-urea inclusion compound. POLYMER, 43(14), 3969–3972. https://doi.org/10.1016/S0032-3861(02)00225-2 Huh, Y., Kim, Y. R., & Oxenham, W. (2002). Analyzing structural and physical properties of ring, rotor, and friction spun yarns. TEXTILE RESEARCH JOURNAL, 72(2), 156–163. https://doi.org/10.1177/004051750207200212 McCord, M. G., Hwang, Y. J., Hauser, P. J., Qiu, Y., Cuomo, J. J., Hankins, O. E., … Canup, L. K. (2002). Modifying nylon and polypropylene fabrics with atmospheric pressure plasmas. TEXTILE RESEARCH JOURNAL, 72(6), 491–498. https://doi.org/10.1177/004051750207200605 Shuai, X. T., Porbeni, F. E., Wei, M., Bullions, T., & Tonelli, A. E. (2002). Formation of inclusion complexes of poly(3-hydroxybutyrate)s with cyclodextrins. 1. Immobilization of atactic poly(R,S-3-hydroxybutyrate) and miscibility enhancement between poly(R,S-3-hydroxybutyrate) and poly(epsilon-caprolactone). MACROMOLECULES, 35(8), 3126–3132. https://doi.org/10.1021/ma011954s Afshari, M., Kotek, R., Kish, M. H., Dast, H. N., & Gupta, B. S. (2002). Effect of blend ratio on bulk properties and matrix-fibril morphology of polypropylene/nylon 6 polyblend fibers. POLYMER, 43(4), 1331–1341. https://doi.org/10.1016/S0032-3861(01)00689-9 Lu, J., Mirau, P. A., & Tonelli, A. E. (2002). [Review of Chain conformations and dynamics of crystalline polymers as observed in their inclusion compounds by solid-state NMR]. PROGRESS IN POLYMER SCIENCE, 27(2), 357–401. https://doi.org/10.1016/S0079-6700(01)00045-4 Wei, M., Ivey, D. T., & Tonelli, A. E. (2002). What is the source of the microstructural dependence of resonance frequencies observed in the solution NMR of polymers whose local structures and conformations appear to be independent of their longer range microstructures? MACROMOLECULES, 35(5), 1976–1979. https://doi.org/10.1021/ma011616r Shuai, X. T., Probeni, F. E., Wei, M., Bullions, T., & Tonelli, A. E. (2002). Stereoselectivity in the formation of crystalline inclusion complexes of poly(3-hydroxybutyrate)s with cyclodextrins. MACROMOLECULES, 35(9), 3778–3780. https://doi.org/10.1021/ma012038h Bullions, T. A., Wei, M., Porbeni, F. E., Gerber, M. J., Peet, J., Balik, M., … Tonelli, A. E. (2002). Reorganization of the structures, morphologies, and conformations of bulk polymers via coalescence from polymer-cyclodextrin inclusion compounds. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 40(10), 992–1012. https://doi.org/10.1002/polb.10152 Hattori, K., Cuculo, J. A., & Hudson, S. M. (2002). New solvents for cellulose: Hydrazine/thiocyanate salt system. JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 40(4), 601–611. https://doi.org/10.1002/pola.10135 Lu, J., Mirau, P. A., Shin, I. D., Nojima, S., & Tonelli, A. E. (2002). Molecular motions in the supramolecular complexes between poly(epsilon-caprolactone)-poly(ethylene oxide)-poly(epsilon-caprolactone) and alpha- and gamma-cyclodextrins. MACROMOLECULAR CHEMISTRY AND PHYSICS, 203(1), 71–79. https://doi.org/10.1002/1521-3935(20020101)203:1<71::AID-MACP71>3.0.CO;2-D Jenkins, D. W., & Hudson, S. M. (2002). Heterogeneous graft copolymerization of chitosan powder with methyl acrylate using trichloroacetyl-manganese carbonyl co-initiation. MACROMOLECULES, 35(9), 3413–3419. https://doi.org/10.1021/ma011336b Pai, V., Srinivasarao, M., & Khan, S. A. (2002). Evolution of microstructure and rheology in mixed polysaccharide systems. MACROMOLECULES, 35(5), 1699–1707. https://doi.org/10.1021/ma0115545 Loesing, R., Guryanov, G. M., Phillips, M. S., & Griffis, D. P. (2002). Comparison of secondary ion mass spectroscopy analysis of ultrashallow phosphorus using Cs+, O-2(+), and CsC6- primary ion beams. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, Vol. 20, pp. 507–511. https://doi.org/10.1116/1.1450588 Qiu, Y., Zhang, C., Hwang, Y. J., Bures, B. L., & McCord, M. (2002). The effect of atmospheric pressure helium plasma treatment on the surface and mechanical properties of ultrahigh-modulus polyethylene fibers. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 16(1), 99–107. https://doi.org/10.1163/15685610252771185 Kuehni, R. G. (2002). A brief history of calico printing. AATCC Review, 2(7), 7–11. Tonelli, A. E. (2002). The conformations of poly(butylene-terephthalate) and poly(butylene-2,6-naphthalate) chains in their alpha and beta crystalline polymorphs. POLYMER, 43(22), 6069–6072. https://doi.org/10.1016/S0032-3861(02)00506-2 Wu, G., Li, H. W., Wu, Y. Q., & Cuculo, J. A. (2002). Structure and property studies of poly(trimethylene terephthalate) high-speed melt spun fibers. POLYMER, 43(18), 4915–4922. https://doi.org/10.1016/S0032-3861(02)00306-3 Kanik, M., & Hauser, P. J. (2002). Printing of cationised cotton with reactive dyes. Coloration Technology, 118(6), 300–306. https://doi.org/10.1111/j.1478-4408.2002.tb00114.x Mock, G. N. (2002). Finishing touch. Textile World (New York, N.Y.), 152(3), 44–45. Hauser, P. J., & Tabba, A. H. (2002). Dyeing cationic cotton with fiber reactive dyes: Effect of reactive chemistries. AATCC Review, 2(5), 36–39. Clapp, T. G., & Martin, B. R. (2002). Development of a felled seam monitoring device. TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, 24(1), 51–64. https://doi.org/10.1191/0142331202tm045oa Tonelli, A. E. (2002). PET versus PEN: what difference can a ring make? POLYMER, 43(2), 637–642. https://doi.org/10.1016/S1089-3156(00)00028-3