Textile Engineering, Chemistry and Science - 2003 Suh, M. W., Jasper, W., Cherkassky, A., Gunay, M., & Han, D. (2003). 3-D electronic imaging of fabric qualities by on-line yarn data. In National Textile Center Annual Report. van Son- de Waard, E. N., Kamstra, M., & DenHartog, E. A. (2003). The bi-lateral US-NL collaboration on dismounted combatant operations : summer of 2003 (Report No. TNO-PML 2003 - A93). TNO. DenHartog, E. A. (2003). Presteren in de warmte - Reportage stage heren hockeyteam 2003 [Performance in the heat - Report on the field hockey trip] (Report No. TNO-TM - 03 - C041). TNO. Holmér, I., Geng, Q., Havenith, G., DenHartog, E., Rintamäki, H., Malchaire, J., & Piette, A. (2003). Temperature limit values for cold touchable surfaces: Final report on the project: SMT4-CT97-2149 (Report No. NR 2003:7). Stockholm, Sweden: Arbetslivsinstitutet. Michielsen, S., & Yang, S. Y. (2003). Orientation distribution function for PET chains via Raman microspectroscopy. Abstracts of Papers of the American Chemical Society, 226, U524. Retrieved from http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000187062502757&KeyUID=WOS:000187062502757 Michielsen, S. (2003). Effect of surface charge on acid dye uptake by nylon-6,6. Abstracts of Papers of the American Chemical Society, 225, U558. Retrieved from http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000187918002875&KeyUID=WOS:000187918002875 Cable, D. R. M., & DenHartog, E. A. (2003). Human factors in IUSS 3.1 - an initial evaluation = Human factors in IUSS 3.1 - een eerste evaluatie (No. TNO-TM - 03 - B007). Den Hartog, E. A., & Heus, R. (2003). Positive pressure breathing during rest and exercise. Applied Ergonomics, 34(2), 185–194. https://doi.org/10.1016/S0003-6870(02)00084-4 Tafreshi, H., Begenir, A., & Pourdeyhimi, B. (2003, May). The Role of Nozzle Design in Characteristics of the Hydroentangling Waterjets. Presented at the Institute for Liquid Atomization and Spray Systems (ILASS) Americas, 16th Annual Conference on Liquid Atomization and Spray Systems, Monterey, CA. Tafreshi, H., & Pourdeyhimi, B. (2003). Gas-particle Decoupling by Nozzle-induced Aerodynamic Effects. Presented at the American Filtration and Separation Society 16th Annual Technical Conference, Reno, Nevada. Shamey, R., Zhao, X. M., Guerri, J. C., Pajares, A., & Palau, C. (2003). Simulation and control of package dyeing process based on a mathematical description of dye transfer through the package. 1st International Industrial Simulation Conference 2003, 451–456. An expert system for yarn dyeing. (2003). Modelling and Simulation 2003, 199–202. Cai, Z., Qiu, Y., Hwang, Y. J., Zhang, C., & McCord, M. (2003). The Use of Atmospheric Pressure Plasma Treatment in Desizing PVA on Viscose Fabrics. Journal of Industrial Textiles, 32(3), 223–232. https://doi.org/10.1177/1528083703032003005 Pasquinelli, M. A., & Beratan, D. N. (2003). Theoretical studies of the effects of phosphorylation on protein electron transfer chains. BIOPHYSICAL JOURNAL, 84(2), 149A–150A. Yaron, D., Pasquinelli, M., & Liu, L. A. (2003). Modeling the consequences of disorder on the photophysics of conjugated polymers: Do excitons and charges see the same disorder? ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 226, U290–U291. Zhang, X., Wang, C., & Appleby, A. J. (2003). Improving low-temperature performance of li-alloy anodes by optimization of the electrolyte-electrode interface. Journal of Power Sources, 114. https://doi.org/https://doi.org/10.1016/s0378-7753(02)00544-x Lertworasirikul, S., Fang, S.-C., Joines, J. A., & Nuttle, H. L. W. (2003). Fuzzy Data Envelopment Analysis: A Credibility Approach. Fuzzy Sets Based Heuristics for Optimization, pp. 141–158. https://doi.org/10.1007/978-3-540-36461-0_10 Joines, J. A., Sutton, A. B., Thoney, K., King, R. E., & Hodgson, T. J. (2003). Factory scheduling: implementing a simulation-based scheduling system for a two-plant operation. Proceedings of the 35th conference on Winter simulation: driving innovation, 1440–1448. Brenzovich, J. A. (2003). Fabric defect detection using a GA tuned wavelet filter. Jasper, W., Joines, J. A., & Brenzovich, J. (2003). Fabric Defect Detection Using a GA Tuned Wavelet Filter. Computers and Their Applications, 345–350. A Genetic Algorithm for Function Optimization: A Matlab Implementation. (2003). Research Journal of Microbiology, 1(6), 979–985. W., J., Joines, J. A., & Brezenvich, J. (2003). Fabric defect detection using a GA tuned wavelet filter. Computers and their applications, 345–349. Honolulu, Hawaii, USA. Barnhardt, R., Hinestroza, J., & Joines, J. A. (2003). Control Systems at ITMA 2003. Journal of Textile and Apparel, Technology and Management, 3(3). W., J., Joines, J. A., & Brenzovich, J. (2003). Fabric Defect Detection Using a GA Tuned Wavelet Filter. Proceedings of the ISCA Conference on Computers and Applications, 345–349. ghosh, & Phillips, K. (2003). The technology of polypropylene tape yarn processing and applications. Textile Progress, 33(1). https://doi.org/10.1080/00405160308688957 Kotek, R., Jung, D. W., Kim, J. H., Smith, B., Guzman, P., & Schmidt, B. (2003). Surface hydrolysis of filaments based on poly(trimethylene terephthalate). 3rd AUTEX Conference: 25-27 June 2003, Gdan?sk-Poland: World Textile Conference. Lo?dz? Jasper W., J., J. A., & Brenzovich, J. (2003). Fabric defect detection using a GA tuned wavelet filter. Computers and their applications : proceedings of the ISCA 18th international conference, Honolulu, Hawaii, USA March 26-28, 2003, 345–349. Cary, NC: International Society for Computers and Their Applications. King, M. W., York, R. K., & Zhang, Q. (2003). Olfactory properties of fabrics: Assessment by sensory panel vs. electronic nose. 3rd AUTEX Conference: 25-27 June 2003, Gdan?sk-Poland: World Textile Conference. Lo?dz? McCord, M. G., & Blanchard, S. M. (2003). Use of a single team-based written project to address multiple objectives and outcomes for a biomedical engineering program. 2003 ASEE annual conference and exposition. Washington, DC : ASEE. Pourdeyhimi, B. (2003). Structure-process-property relationship in hydroentangled nonwovens. INTC 2003 : International Nonwovens Technical Conference : conference proceedings : September 15-18, 2003, Renaissance Harborplace Hotel, Baltimore, Maryland. Cary, N.C. : INDA, Association of the Nonwoven Fabrics Industry. Smith, B. (2003). Flow injection analysis of disperse dyeing. Proceedings of the Annual International Conference & Exhibition of the American Association of Textile Chemists and Colorists, 30(5), 14. Oxenham, W. (2003). Developments in spinning. Textile World (New York, N.Y.), 34–37. McCord, M. G., & Nerz, H. M. (2003). Using information literacy standards to meet ABET accreditation outcomes. 2003 ASEE annual conference and exposition: June 22-25, 2003, Nashville, TN. Washington, DC: ASEE. Shamey, R., & Hussain, T. (2003). Towards intelligent diagnosis in yarn dyeing. INTEDEC 2003: fibrous assemblies at the design and engineering interface. [Edinburgh]: RIFleX, Heriot-Watt University. Shamey, R., Iqbal, S. A., & Mather, R. R. (2003). The effect of pigmentation on tenacity of polypropylene fibres. INTEDEC 2003: fibrous assemblies at the design and engineering interface. [Edinburgh]: RIFleX, Heriot-Watt University. Parrish, E. D., & Oxenham, W. (2003). The effect of NAFTA on US spinning industry. AUTEX Research Journal, 3(3), 148–152. Joines, J. A., Sutton, A. W., Thoney, K. A., King, R. E., & Hodgson, T. J. (2003). Implementing a simulation-based scheduling system for a two-plant operation. Proceedings of the 2003 Winter Simulation Conference: Fairmont Hotel, New Orleans, LA, U.S.A., December 7-10, 2003. https://doi.org/10.1109/wsc.2003.1261587 Freeman, H. S., & Mock, G. N. (2003). Dye application, manufacture of dye intermediates and dyes. In Riegel's handbook of industrial chemistry (10th ed.). New York: Kluwer Academic/Plenum Publishers. Basal, G., & Oxenham, W. (2003). Vortex spun yarns vs. air-jet spun yarn. AUTEX Research Journal, 3(3), 96–101. King, M. W., & Jones, A. D. (2003). The potential for localised delivery of antibiotics from braided surgical sutures. Medical textiles and biomaterials for healthcare: incorporating proceedings of MEDTEX03 International Conference and Exhibition on Healthcare and Medical Textiles. Cambridge: Woodhead. Oxenham, W. (2003). Italian textile technology - machines Italia: Spinning. Textile World (New York, N.Y.), 153(6). Pourdeyhimi, B. (2003). Italian textile technology - machines Italia: Nonwovens. Textile World (New York, N.Y.), 153(6). Jablonski, E. L., Gorga, R. E., & Narasimhan, B. (2003). Interdiffusion and phase behavior at homopolymer/random copolymer interfaces. POLYMER, 44(3), 729–741. https://doi.org/10.1016/S0032-3861(02)00826-1 Schindler, W. D., & Hauser, P. J. (2003). Chemical finishing of textiles: Soft handle finish. International Textile Bulletin, 49(4), 72–79. Schindler, W. D., & Hauser, P. J. (2003). Chemical finishing of textiles: Hand builders. International Textile Bulletin, 49(2), 68–71. King, M. W., Leung, J. C., Dattilo, P. P., & Ruff, G. L. (2003). A novel knotless surgical suture for wound closure. Medical textiles and biomaterials for healthcare: incorporating proceedings of MEDTEX03 International Conference and Exhibition on Healthcare and Medical Textiles. Cambridge: Woodhead. Gupta, B. S. (2003). Porosity and its characterization in nonwovens. Beltwide Cotton Conferences. Proceedings, 2392–2398. Gupta, B. S., & Sehgal, K. C. (2003). Fundamental and practical aspects of adhesion in binder and coating applications. INTC 2003: International Nonwovens Technical Conference: conference proceedings: September 15-18, 2003, Renaissance Harborplace Hotel, Baltimore, Maryland, 1–14. Atlanta, Ga.: Tappi Press. Grant, E., Luthy, K., Muth, J., Mattos, L. S., Braly, J. C., Dhawan, A., … Seyam, A. M. (2003). Developing portable acoustic arrays on a large-scale e-textile substrate. INTEDEC 2003: fibrous assemblies at the design and engineering interface. [Edinburgh]: RIFleX, Heriot-Watt University. Tafreshi, H., Begenir, A., & Pourdeyhimi, B. (2003). The role of orifice geometry on hydroentangling: Experimental observations. INTC 2003: International Nonwovens Technical Conference: conference proceedings: September 15-18, 2003, Renaissance Harborplace Hotel, Baltimore, Maryland. Atlanta, Ga.: Tappi Press. Pourdeyhimi, B. (2003). Scratch and mar brought about by wipes. INTC 2003: International Nonwovens Technical Conference: conference proceedings: September 15-18, 2003, Renaissance Harborplace Hotel, Baltimore, Maryland. Atlanta, Ga.: Tappi Press. Michielsen, S., Pourdeyhimi, B., & Desai, P. (2003). Review of thermally point bonded nonwovens: Materials, processes and properties. INTC 2003: International Nonwovens Technical Conference: conference proceedings: September 15-18, 2003, Renaissance Harborplace Hotel, Baltimore, Maryland. Atlanta, Ga.: Tappi Press. Tafreshi, H., & Pourdeyhimi, B. (2003). Cavitation in hydroentangling orifices. INTC 2003: International Nonwovens Technical Conference: conference proceedings: September 15-18, 2003, Renaissance Harborplace Hotel, Baltimore, Maryland. Atlanta, Ga.: Tappi Press. Lertworasirikul, S., Fang, S.-C., Joines, J. A., & Nuttle, H. L. (2003). Fuzzy BCC model for data envelopment analysis. Fuzzy Optimization and Decision Making, 2(4), 337–358. https://doi.org/10.1023/b:fodm.0000003953.39947.b4 Freeman, H. S., Pielesz, A., Wysocki, M., Weselucha-Birczynska, A., & Wlochowicz, A. (2003). Characterisation of direct dye interactions with cotton via IR and Raman spectroscopies. Advances in Colour Science and Technology, 6(4), 111–115. Pourdeyhimi, B., Vaidya, N., Shiffler, D., & Acar, M. (2003). The manufacturing of wet-laid hydroentangled glass fiber composites: Preliminary results. International Nonwovens Journal, 12(4), 55–59. Michielsen, S. (2003). Surface modification of fibers via graft-site amplifying polymers. International Nonwovens Journal, 12(3), 41–44. Oxenham, W. (2003). Spinning machinery at ITMA. Journal of Textile and Apparel Technology and Management, 3(3), 1–6. Bozja, J., Sherrill, J., Michielsen, S., & Stojiljkovic, I. (2003). Porphyrin-based, light-activated antimicrobial materials. Journal of Polymer Science Part a-Polymer Chemistry, 41(15), 2297–2303. https://doi.org/10.1002/pola.10773 Yang, S. Y., & Michielsen, S. (2003). Orientation distribution functions obtained via polarized Raman spectroscopy of poly(ethylene terephthalate) fibers. MACROMOLECULES, 36(17), 6484–6492. https://doi.org/10.1021/ma034486q Mock, G. N., Oxenham, W., Seyam, A., Powell, N., Poudeyhimi, B., & Borneman, J. M. (2003). Machines Italia. Textile World (New York, N.Y.), 153(6), 34–45. Kim, H. S., & Pourdeyhimi, B. (2003). In-plane liquid distribution in nonwoven fabrics part II: Simulation. International Nonwovens Journal, 12(2). Sherrill, J., Michielsen, S., & Stojiljkovic, I. (2003). Grafting of light-activated antimicrobial materials to nylon films. JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 41(1), 41–47. https://doi.org/10.1002/pola.10556 Farer, R., Ghosh, T. K., Seyam, A. M., Grant, E., & Batra, S. K. (2003). Study of meltblown structures formed by robotic and meltblowing integrated system: Impact of process parameters on fiber diameter distribution. International Nonwovens Journal, 12(1), 36–42. Pasquinelli, M. A., & Yaron, D. (2003). Quantum chemical investigation of biexcitons in conjugated polymers. JOURNAL OF CHEMICAL PHYSICS, 118(17), 8082–8092. https://doi.org/10.1063/1.1565100 Hauser, P., & Kanik, M. (2003). Printing of cationised cotton with acid dyes. AATCC Review, 3(3), 25–28. Yang, Y., Li, S., & Stewart, N. (2003). One-step inkjet printing and durable press finishing. AATCC Review, 3(3), 29–31. Hauser, P. (2003). ITMA 2003: Preparation. Journal of Textile and Apparel Technology and Management, 3(3). Hauser, P. (2003). ITMA 2003: Chemical finishing. Journal of Textile and Apparel Technology and Management, 3(3). Yang, Y., & Li, S. (2003). Cotton fabric inkjet printing with acid dyes. Textile Research Journal, 73(9), 809–814. https://doi.org/10.1177/004051750307300910 Tonelli, A. E. (2003). The potential for improving medical textiles with cyclodextrin inclusion compounds. Journal of Textile and Apparel Technology and Management, 3(2), 1. Hauser, P. J., Hashem, M., & Smith, C. B. (2003). Ionic crosslinking of cotton. Research Journal of Textile & Apparel, 7(1), 1–7. https://doi.org/10.1108/rjta-07-01-2003-b001 Hodge, G. (2003). ITT Fellows program at North Carolina State University. Journal of Textile and Apparel Technology and Management, 3(1). Hodge, G. (2003). IFAI and APICS 2003 conferences. Journal of Textile and Apparel Technology and Management, 3(3). Beck, K. R., Draper, S. L., Smith, C. B., & Hauser, P. J. (2003). Characterization of the dyeing behavior of cationic cotton using direct dyes. AATCC Review, 3(8), 51–55. Tonelli, A. E. (2003). Balancing teaching and research. Chemical & Engineering News, 81(6). Zhang, X. W., Wang, C. S., & Appleby, A. J. (2003). Improving low-temperature performance of Li-alloy anodes by optimization of the electrolyte-electrode interface. JOURNAL OF POWER SOURCES, 114(1), 121–126. https://doi.org/10.1016/S0378-7753(02)00544-X Smith, B. (2003). Affinities and rate constants of disperse dyes in supercritical fluid carbon dioxide. Journal of Supercritical Fluids. Smith, B. (2003). A supplementary system for introducing the laws of thermodynamics part II: The laws of thermodynamics. Journal of Chemical Education, 80. Smith, B. (2003). A supplementary system for introducing the laws of thermodynamics part I: Equations of state. Journal of Chemical Education, 80. Berkalp, O., Pourdeyhimi, B., & Seyam, A. M. (2003). Texture evolution in hydroentangled nonwovens. International Nonwovens Journal, 12(1), 28–35. Sumanasinghe, R. D., & King, M. W. (2003). New trends in Biotextiles: The challenge of tissue engineering. Journal of Textile and Apparel Technology and Management, 3(2), 1–13. Chowdhury, A. I., Tollesfson, E. L., & Ghosh, T. K. (2003). Process for elimination of low concentrations of hydrogen sulfide in gas mixtures by catalytic oxidation. Washington, DC: U.S. Patent and Trademark Office. Loyalka, S., Ghosh, T., Tompson, R. V., Vosnidis, G. H., G. A., O., H., & Endo, T. (2003). Adsorbent for HC in exhaust gas, and process for producing the same. Washington, DC: U.S. Patent and Trademark Office. McCord, M. G., Blanchard, S. M., Mente, P. L., Nagle, H. T., & Spurlin, J. E. (2003). Outcomes based curriculum development in a new and emerging biomedical engineering program. American Society for Engineering Education. Anson, C. M., Carter, M., Dannels, D., & Rust, J. (2003). Mutual support: CAC programs and institutional improvement in undergraduate education. Language and Learning Across the Disciplines, 6, 25–37. Karpe, Y., Hodge, G. L., & Oxenham, W. (2003). Applying information engineering methodology for decision making in textiles. 7th Asian Textile Conference, New Delhi, India, December 2003. Hodge, G. L. (2003). Directory of manufacturing planning and control software for the textile and apparel industry. Falls Church, VA: APICS. Shamey, R., Zhao, X., & Vosoughi, M. (2003). Simulation and control of the flow rate and dosing profiles in package dyeing process based on a new mathematical model. International Textile Design and Engineering (INTEDEC), Edinburgh, UK. Edinburgh: INTEDEC. Shamey, R., Zhao, X., & Vosoughi, M. (2003). Simulation and control of package dyeing process based on a mathematical description of dye transfer through the package. Industrial Simulation Conference, Valencia, Spain, 451–457. Shamey, R., & Hussain, T. (2003). An expert system for yarn dyeing. European Simulation & Modeling International Conference, Naples, Italy, Oct. 27-29, 2003, 199. Shamey, R., & Hussain, T. (2003). An expert system for diagnosing dyeing problems. Computational Engineering in Systems Applications, Lille, France. Beck, K. R. (2003). Dyebath monitoring. AATCC Review, 3(8), 13-. Hwang, Y. J., An, J. S., McCord, M. G., Park, S. W., & Kang, B. C. (2003). The effect of etching on low-stress mechanical properties of polypropylene fabrics under helium/oxygen atmospheric pressure plasma. FIBERS AND POLYMERS, 4(4), 145–150. https://doi.org/10.1007/BF02908270 Kuehni, R. G. (2003). Color space and its divisions: Color order from antiquity to the present. https://doi.org/10.1063/1.1650231 Berkalp, O. B., Pourdeyhimi, B., Seyam, A., & Holmes, R. (2003). Texture retention after fabric-to-fabric abrasion. TEXTILE RESEARCH JOURNAL, 73(4), 316–321. https://doi.org/10.1177/004051750307300407 Ghosh, T. K., & Zhou, N. Y. (2003). Characterization of fabric bending behavior: A review of measurement principles. Indian Journal of Fibre & Textile Research, 28(4), 471–476. Shamey, R., & Sinha, K. (2003). A review of degradation of nylon 6.6 as a results of exposure to environmental conditions. Review of Progress in Coloration and Related Topics, 33, 93–107. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0346403107&partnerID=MN8TOARS Zamfir, M., McCulloch, J., & Pourdeyhimi, B. (2003). Recent developments in spunbonding and meltblowing. Nonwovens Industry, 34(6), 48–52. Hashem, M., Hauser, P., & Smith, B. (2003). Reaction efficiency for cellulose cationization using 3-chloro-2-hydroxypropyl trimethyl ammonium chloride. TEXTILE RESEARCH JOURNAL, 73(11), 1017–1023. https://doi.org/10.1177/004051750307301113 Wei, M., Shuai, X. T., & Tonelli, A. E. (2003). Melting and crystallization behaviors of biodegradable polymers enzymatically coalesced from their cyclodextrin inclusion complexes. BIOMACROMOLECULES, 4(3), 783–792. https://doi.org/10.1021/bm034078u Cannon, K. M., & Hauser, P. J. (2003). Color assessment of cationic cotton dyed with fiber reactive dyes. AATCC Review, 3(5), 21–23. Lim, S. H., & Hudson, S. M. (2003). [Review of Review of chitosan and its derivatives as antimicrobial agents and their uses as textile chemicals]. JOURNAL OF MACROMOLECULAR SCIENCE-POLYMER REVIEWS, C43(2), 223–269. https://doi.org/10.1081/MC-120020161 Qiu, Y.-P., Mohamed, M. H., & Xu, W. (2003). Method of making a three-dimensionally reinforced cellular matrix composite. Washington, DC: U.S. Patent and Trademark Office. Hendrix, W. A., Montero, G. A., Smith, C. B., & Butcher, D. L. (2003). Method for introducing dyes and other chemicals into a textile treatment system. Washington, DC: U.S. Patent and Trademark Office. Velu, Y. K., Ghosh, T. K., & Seyam, A. M. (2003). Meltblown structures formed by a robotic and meltblowing integrated system: Impact of process parameters on pore size. TEXTILE RESEARCH JOURNAL, 73(11), 971–979. https://doi.org/10.1177/004051750307301107 Kuehni, R. G. (2003). Colour difference formulas: accurate enough for objective colour quality control of textiles? Coloration Technology, 119(3), 164–169. https://doi.org/10.1111/j.1478-4408.2003.tb00167.x Russell, P. E., Griffis, D. P., & Gonzales Perez, J. C. (2003). Chemically enhanced focused ion beam micro-machining of copper. Washington, DC: U.S. Patent and Trademark Office. Zhang, C. Y., & Qiu, Y. P. (2003). Modified shear lag model for fibers and fillers with irregular cross-sectional shapes. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 17(3), 397–408. https://doi.org/10.1163/156856103762864697 Xu, W., Qiu, Y., Wang, Y., & Mohamed, M. H. (2003). Experimental and numerical analyses on the stiffness of three-dimensional woven carbon preform reinforced cellular matrix composites. COMPOSITES SCIENCE AND TECHNOLOGY, 63(10), 1387–1392. https://doi.org/10.1016/S0266-3538(03)00081-2 Tafreshi, H. V., & Pourdeyhimi, B. (2003). The effects of nozzle geometry on waterjet breakup at high Reynolds numbers. EXPERIMENTS IN FLUIDS, 35(4), 364–371. https://doi.org/10.1007/s00348-003-0685-y Tafreshi, H. V., & Pourdeyhimi, B. (2003). Simulating the flow dynamics in hydroentangling nozzles: Effect of cone angle and nozzle aspect ratio. TEXTILE RESEARCH JOURNAL, 73(8), 700–704. https://doi.org/10.1177/004051750307300807 Seyam, A. M., Turner, L. C., & Banks-Lee, P. (2003). Protective system from medical needle-sticks. Part II: Evaluation of woven structures and bifid needles. FIBERS AND POLYMERS, 4(3), 129–134. https://doi.org/10.1007/BF02875460 El-Shafei, A., Boyle, P. D., Hinks, D., & Freeman, H. S. (2003). Non-mutagenic organic pigment intermediates. I. 3,3 '-Dipropoxybenzidine. ACTA CRYSTALLOGRAPHICA SECTION C-CRYSTAL STRUCTURE COMMUNICATIONS, 59(2), O71–O73. https://doi.org/10.1107/S0108270102021303 Lu, J., Mirau, P. A., Nojima, S., & Tonelli, A. E. (2003). NMR studies of the dynamics of homo- and block-copolymer poly(epsilon-caprolactone) chains in their inclusion compounds with alpha- and gamma-CDs. NMR Spectroscopy of Polymers in Solution and in the Solid State, 834, 43–57. https://doi.org/10.1021/bk-2003-0834.ch004 Cai, Z. S., Qiu, Y. P., Zhang, C. Y., Hwang, Y. J., & McCord, M. (2003). Effect of atmospheric plasma treatment on desizing of PVA on cotton. Textile Research Journal, 73(8), 670–674. https://doi.org/10.1177/004051750307300803 Draper, S. L., Beck, K. R., Smith, C. B., & Hauser, P. J. (2003). Characterization of the dyeing behavior of cationic cotton with acid dyes. AATCC Review, 3(8), 51–55. Sikkema, D. J., Northolt, M. G., & Pourdeyhimi, B. (2003). Assessment of new high-performance fibers for advanced applications. MRS BULLETIN, 28(8), 579–584. https://doi.org/10.1557/mrs2003.169 Lee, F., POURDEYHIMI, B. E. H. N. A. M., Hazzard, C., & Summerville, J. (2003). Analysis of coatings appearance and durability testing induced surface defects using image capture/processing/analysis. Revista De Metalurgia, (2003), 206–212. https://doi.org/10.3989/revmetalm.2003.v39.iextra.1121 Jensen, C., Zhang, C., & Qiu, Y. (2003). The aging of atmospheric plasma-treated ultrahigh-modulus polyethylene fibers. COMPOSITE INTERFACES, 10(2-3), 277–285. https://doi.org/10.1163/156855403765826919 McCord, M. G., Hwang, Y. J., Qiu, Y., Hughes, L. K., & Bourham, M. A. (2003). Surface analysis of cotton fabrics fluorinated in radio-frequency plasma. JOURNAL OF APPLIED POLYMER SCIENCE, 88(8), 2038–2047. https://doi.org/10.1002/app.11896 Ha, S. W., Park, Y. H., & Hudson, S. M. (2003). Dissolution of Bombyx mori silk fibroin in the calcium nitrate tetrahydrate-methanol system and aspects of wet spinning of fibroin solution. BIOMACROMOLECULES, 4(3), 488–496. https://doi.org/10.1021/bm0255948 Hinks, D., Rafiq, M. I., Price, D. M., Montero, G. A., & Smith, B. (2003). A comparison of vapour pressure measurements of quinizarin and leucoquinizarin via transpiration and thermogravimetry. Coloration Technology, 119(2), 84–90. https://doi.org/10.1111/j.1478-4408.2003.tb00155.x Hashem, A., Hauser, P., & Smith, B. (2003). Wrinkle recovery for cellulosic fabric via ionic crosslinking. Textile Research Journal, 73(9), 762–766. https://doi.org/10.1177/004051750307300903 El Tahlawy, K., & Hudson, S. M. (2003). Synthesis of a well-defined chitosan graft poly(methoxy polyethyleneglycol methacrylate) by atom transfer radical polymerization. JOURNAL OF APPLIED POLYMER SCIENCE, 89(4), 901–912. https://doi.org/10.1002/app.12001 Tonelli, A. E. (2003, October). Reorganization of the structures, morphologies, and conformations of polymers by coalescence from their crystalline inclusion compounds formed with cyclodextrins. MACROMOLECULAR SYMPOSIA, Vol. 203, pp. 71–87. https://doi.org/10.1002/masy.200351306 Lertworasirikul, S., Fang, S. C., Joines, J. A., & Nuttle, H. L. W. (2003). Fuzzy data envelopment analysis (DEA): a possibility approach. Fuzzy Sets and Systems, 139(2), 379–394. https://doi.org/10.1016/S0165-0114(02)00484-0 Mohammadi, M., Banks-Lee, P., & Ghadimi, P. (2003). Determining radiative heat transfer through heterogeneous multilayer nonwoven materials. TEXTILE RESEARCH JOURNAL, 73(10), 896–900. https://doi.org/10.1177/004051750307301008 Pielesz, A., Freeman, H. S., Weselucha-Birczynska, A., Wysocki, M., & Wlochowicz, A. (2003, June 1). Assessing secondary structure of a dyed wool fibre by means of FTIR and FTR spectroscopies. JOURNAL OF MOLECULAR STRUCTURE, Vol. 651, pp. 405–418. https://doi.org/10.1016/s0022-2860(03)00210-2 Cai, Z. S., & Qiu, Y. P. (2003). Using an aqueous epoxide in Bombyx mori silk fabric finishing. Textile Research Journal, 73(1), 42–46. https://doi.org/10.1177/004051750307300108 Yin, Z. G., Jin, K., Zhao, D. F., Peng, Q. J., & Freeman, H. S. (2003). Studies on the synthesis and mutagenicity of 2,8-diamino-10- hydroxy-5-methyl-5,10-dihydrophenophosphazine-10-oxide. Chemical Journal of Chinese Universities, 24(7), 1210–1215. Tafreshi, H. V., & POURDEYHIMI, B. E. H. N. A. M. (2003). Role of baffles on flow fields inside wet-lay mixing tanks and their potential influence on fiber dispersion. Textile Research Journal, 73(7), 575–582. https://doi.org/10.1177/004051750307300703 Turner, L. C., Seyam, A. M., & Banks-Lee, P. (2003). Protective system from medical needle-sticks. Part I: Background and system development. FIBERS AND POLYMERS, 4(2), 54–58. https://doi.org/10.1007/BF02875437 Abdala, A. A., Tonelli, A. E., & Khan, S. A. (2003). Modulation of hydrophobic interactions in associative polymers using inclusion compounds and surfactants. MACROMOLECULES, 36(20), 7833–7841. https://doi.org/10.1021/ma034173v Bae, J. S., Freeman, H. S., & El-Shafei, A. (2003). Metallization of non-genotoxic direct dyes. DYES AND PIGMENTS, 57(2), 121–129. https://doi.org/10.1016/S0143-7208(02)00120-1 Farer, R., Seyam, A. M., Ghosh, T. K., Batra, S. K., Grant, E., & Lee, G. (2003). Forming shaped/molded structures by integrating meltblowing and robotic technologies. TEXTILE RESEARCH JOURNAL, 73(1), 15–21. https://doi.org/10.1177/004051750307300103 Wang, J. H., Griffis, D. P., Garcia, R., & Russell, P. E. (2003). Etching characteristics of chromium thin films by an electron beam induced surface reaction. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 18(4), 199–205. https://doi.org/10.1088/0268-1242/18/4/302 Hwang, Y. J., Qiu, Y., Zhang, C., Jarrard, B., Stedeford, R., Tsai, J., … McCord, M. (2003). Effects of atmospheric pressure helium/air plasma treatment on adhesion and mechanical properties of aramid fibers. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 17(6), 847–860. https://doi.org/10.1163/156856103321645194 Rusa, C. C., Fox, J., & Tonelli, A. E. (2003). Competitive formation of polymer-cyclodextrin inclusion compounds. MACROMOLECULES, 36(8), 2742–2747. https://doi.org/10.1021/ma021755o Hooker, J., Hinks, D., & Freeman, H. (2003). Synthesis, properties and application of four new 1: 2 aluminium-complexed azo dyes. Coloration Technology, 119(1), 41–47. https://doi.org/10.1111/j.1478-4408.2003.tb00150.x Bullions, T. A., Edeki, E. M., Porbeni, F. E., Wei, M., Shuai, X., Rusa, C. C., & Tonelli, A. E. (2003). Intimate blend of poly(ethylene terephthalate) and poly(ethylene 2,6-naphthalate) via formation with and coalescence from their common inclusion compound with gamma-cyclodextrin. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 41(2), 139–148. https://doi.org/10.1002/polb.10366 Kyles, R. E., & Tonelli, A. E. (2003). Conformational characteristics of poly(D-beta-hydroxybutyrate). MACROMOLECULES, 36(4), 1125–1131. https://doi.org/10.1021/ma0200827 Morris, H., & Hauser, P. (2003). The effects of a cationic reagent on typical finishes. AATCC Review, 3(11), 17–19. Pivovarov, A. L., Stevie, F. A., Griffis, D. P., & Guryanov, G. M. (2003). Optimization of secondary ion mass spectrometry detection limit for N in SiC. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 21(5), 1649–1654. https://doi.org/10.1116/1.1595108 Kanik, M., & Hauser, P. J. (2003). Ink-jet printing of cationised cotton using reactive inks. Coloration Technology, 119(4), 230–234. https://doi.org/10.1111/j.1478-4408.2003.tb00177.x Mohammadi, M., Banks-Lee, P., & Ghadimi, P. (2003). Determining effective thermal conductivity of multilayered nonwoven fabrics. TEXTILE RESEARCH JOURNAL, 73(9), 802–808. https://doi.org/10.1177/004051750307300909 Shamey, R., & Hussain, T. (2003). Artificial intelligence in the colour and textile industry. Review of Progress in Coloration and Related Topics, 33(2003), 33–45. https://doi.org/10.1111/j.1478-4408.2003.tb00142.x Hinks, D., Rashad, M., & El-Shafei, A. (2003). Towards a universal dye class for printing on multiple substrates. Coloration Technology, 119(2), 70–75. https://doi.org/10.1111/j.1478-4408.2003.tb00153.x Chaudhary, A. N., & Smith, B. (2003). Synthesis and properties of cationized wool. AATCC Review, 3(1), 27–29. Tafreshi, H. V., Pourdeyhimi, B., Holmes, R., & Shiffler, D. (2003). Simulating and characterizing water flows inside hydroentangling orifices. TEXTILE RESEARCH JOURNAL, 73(3), 256–262. https://doi.org/10.1177/004051750307300310 Montero, G., Hinks, D., & Hooker, J. (2003, May). Reducing problems of cyclic trimer deposits in supercritical carbon dioxide polyester dyeing machinery. JOURNAL OF SUPERCRITICAL FLUIDS, Vol. 26, pp. 47–54. https://doi.org/10.1016/S0896-8446(02)00187-0 Hauser, P. J., & Kanik, M. (2003). Printing of cationized cotton with acid dyes. AATCC Review, 3(3), 25–28. Handbook of yarn production. (2003). Boca Raton: CRC Press. Hooker, J., Hinks, D., Montero, G., & Icherenska, M. (2003). Enzyme-catalyzed hydrolysis of poly(ethylene terephthalate) cyclic trimer. JOURNAL OF APPLIED POLYMER SCIENCE, 89(9), 2545–2552. https://doi.org/10.1002/app.11963