Textile Engineering, Chemistry & Science - 2017

Bogerd, C. P., Langenberg, J. P., & DenHartog, E. A. (2017). A Novel Adjustable Concept for Permeable Gas/Vapor Protective Clothing: Balancing Protection and Thermal Strain. Annals of Work Exposures and Health, 62(2), 232–242. https://doi.org/10.1093/annweh/wxx101

Heus, R., & Denhartog, E. A. (2017). Maximum allowable exposure to different heat radiation levels in three types of heat protective clothing. Industrial Health, 55(6), 529–536. https://doi.org/10.2486/indhealth.2017-0137

Pourdeyhimi, B., Corino, A., Fry, J., Fortner, A., & Lambert, B. (2017). Methods of forming an artificial leather substrate from leather waste and products therefrom (U.S. Patent No. 9822481).

Pickett, T. E., & Ormond, R. B. (2017). Analytical quantification of key odor compounds found in footwear. AATCC 2017 - 2017 AATCC International Conference Proceedings, 87–96. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85021822319&partnerID=MN8TOARS

Maness, C., & Ormond, R. B. (2017). Outward Leakage smoke simulation for evaluating susceptibility of firefighter turnout ensembles and materials to particulate infiltration. AATCC 2017 - 2017 AATCC International Conference Proceedings, 77–86. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85021831835&partnerID=MN8TOARS

Wang, G., Umbuzeiro, G. de A., Vendemiatti, J. A., de Oliveira, A. C., Vacchi, F. I., Hussain, M., … Hinks, D. (2017). Synthesis, Characterization, and Toxicological Properties of New Cationic Bleach Activators. Journal of Surfactants and Detergents, 20(1), 277–285. https://doi.org/10.1007/S11743-016-1899-3

Jena, P. V., Roxbury, D., Galassi, T. V., Akkari, L., Horoszko, C. P., Iaea, D. B., … Heller, D. A. (2017, May 6). A carbon nanotube optical reporter maps endolysosomal lipid flux (Vol. 5). Vol. 5. https://doi.org/10.1101/134999

Fang, X. (2017). Anisotropic D-EAP Electrodes and their Application in Spring Roll Actuators (Ph.D. thesis). North Carolina State University, Raleigh, NC.

Kapoor, A., McKnight, M., Chatterjee, K., Agcayazi, T., Kausche, H., ghosh, & Bozkurt, A. (2017). Soft, flexible 3D printed fibers for capacitive tactile sensing. IEEE Sensors, 1–3. https://doi.org/10.1109/ICSENS.2016.7808918

Leimbrink, M., Tlatlik, S., Salmon, S., Kunze, A.-K., Limberg, T., Spitzer, R., … Skiborowski, M. (2017). Pilot scale testing and modeling of enzymatic reactive absorption in packed columns for CO2 capture. International Journal of Greenhouse Gas Control, 62, 100–112. https://doi.org/10.1016/J.IJGGC.2017.04.010

Li, G., Nandgaonkar, A. G., Wang, Q., Zhang, J., Krause, W. E., Wei, Q., & Lucia, L. A. (2017). Laccase-immobilized bacterial cellulose/TiO2 functionalized composite membranes: Evaluation for photo- and bio-catalytic dye degradation. Journal of Membrane Science, 525, 89–98. https://doi.org/10.1016/J.MEMSCI.2016.10.033

Li, S., Shen, J., Nichol, J. L., & Tonelli, A. E. (2017). Attempted Determination of the Structures of Complex Aliphatic Copolyesters. Macromolecular Chemistry and Physics, 218(22), 1700258. https://doi.org/10.1002/MACP.201700258

West, A., Istook, C., Porterfield, A., & Ghosh, T. (2017). A Service Learning Collaborative to Build a Sustainable Enterprise for Underprivileged Women (SEuW). Journal of Textile Design Research and Practice, 5(1), 3–16. https://doi.org/10.1080/20511787.2017.1362144

Budhathoki-Uprety, J. (2017). A Carbon Nanotube Optical Sensor Reports Nuclear Entry via a Noncanonical Pathway. ACS Nano. https://doi.org/10.1021/acsnano.7b00176

Budhathoki-Uprety, J. (2017). Polymer cloaking modulates the carbon nanotube protein corona and delivery into cancer cells. J. Mater. Chem. B. https://doi.org/10.1039/c7tb00695k

Budhathoki-Uprety, J. (2017). Control of Carbon Nanotube Solvatochromic Response to Chemotherapeutic Agents. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.7b12015

Budhathoki-Uprety, J. (2017). A Carbon Nanotube Optical Reporter Maps Endolysosomal Lipid Flux. ACS Nano. https://doi.org/10.1021/acsnano.7b04743

Zhu, P., Zhu, J. D., Zang, J., Chen, C., Lu, Y., Jiang, M. J., … Zhang, X. W. (2017). novel bi-functional double-layer rGO-PVDF/PVDF composite nanofiber membrane separator with enhanced thermal stability and effective polysulfide inhibition for high-performance lithium-sulfur batteries. Journal of Materials Chemistry A, 5.

Xia, X., Li, Z. Y., Xue, L. G., Qiu, Y. P., Zhang, C. Y., & Zhang, X. W. (2017). electrochemical performance of SnSb/C nanofibers with different morphologies and underlying mechanism. Journal of Materials Research, 32.

Shen, Z., Hu, Y., Chen, R. Z., He, X., Chen, Y. L., Shao, H. F., … Wu, K. S. (2017). Split Sn-Cu alloys on carbon nanofibers by one-step heat treatment for long-lifespan lithium-ion batteries. Electrochimica Acta, 225.

Chen, Y. L., Hu, Y., Shen, Z., Chen, R. Z., He, X., Zhang, X. W., … Wu, K. S. (2017). Hollow core-shell structured silicon@carbon nanoparticles embed in carbon nanofibers as binder-free anodes for lithium-ion batteries. Journal of Power Sources, 342.

Umbuzeiro, G. A., Szymczyk, M., Li, M., Chen, Y., Vendemiatti, J. A. S., de Albuquerque, A. F., … Freeman, H. S. (2017). Purification and characterization of three commercial phenylazoaniline disperse dyes. Coloration Technology, 133(6), 513–518. https://doi.org/10.1111/cote.12307

Myers, A. C., & Jur, J. S. (2017). Effects of thermal energy harvesting on the human - Clothing - environment microsystem. IOP Conference Series: Materials Science and Engineering, 254(7). https://doi.org/10.1088/1757-899X/254/7/072015

Yao, S., Myers, A., Malhotra, A., Lin, F., Bozkurt, A., Muth, J. F., & Zhu, Y. (2017). A Wearable Hydration Sensor with Conformal Nanowire Electrodes. Advanced Healthcare Materials, 6(6). https://doi.org/10.1002/adhm.201601159

Cornelius, C., Saquing, C., Venditti, R., McCord, M. G., & Bourham, M. A. (2017). Effect of Atmospheric Pressure Plasma on Handsheets and Pulps. BioResources, 12(4), 8199–8216. Retrieved from https://bioresources.cnr.ncsu.edu/resources/the-effect-of-atmospheric-pressure-plasma-on-paper-and-pulps/

Cornelius, C., McCord, M., Bourham, M., & Hauser, P. (2017). Desizing of PVA sized pet/cotton fabrics with atmospheric pressure plasma. Cellulose, 25(1), 869–881. https://doi.org/10.1007/s10570-017-1586-1

Sozumert, E., Farukh, F., Sabuncuoglu, B., Demirci, E., Acar, M., POURDEYHIMI, B. E. H. N. A. M., & Silberschmidt, V. V. (2017). Notches in fibrous materials: micro-mechanisms of deformation and damage. XXVII INTERNATIONAL CONFERENCE: MATHEMATICAL AND COMPUTER SIMULATION IN MECHANICS OF SOLIDS AND STRUCTURES - FUNDAMENTALS OF STATIC AND DYNAMIC FRACTURE (MCM 2017), 6, 168–173. https://doi.org/10.1016/j.prostr.2017.11.026

Vaid, R., Pasquinelli, M. A., & King, M. W. (2017). Integrating Experiments and MD Simulations to Determine Degradation of Poly-4-Hydroxybutyrate (P4HB) For Surgical Suture Applications. Proceedings of the Technical Medical Textiles Conference. Presented at the Stuggart, Germany. Stuggart, Germany.

Luo, L., Qiao, H., Xu, W. Z., Li, D. W., Zhu, J. D., Chen, C., … Wei, Q. F. (2017). Tin nanoparticles embedded in ordered mesoporous carbon as high-performance anode for sodium-ion batteries. Journal of Solid State Electrochemistry, 21.

Adikorley, R. D., Thoney-Barletta, K., Joines, J., & Rothenberg, L. (2017). Apparel sourcing in Sub-Saharan Africa. Research Journal of Textile and Apparel, 21(3), 203–218. https://doi.org/10.1108/rjta-05-2017-0022

Chapman, D. D., & Joines, J. A. (2017). Strategies for Increasing Response Rates for Online End-of-Course Evaluations. International Journal of Teaching and Learning in Higher Education, 29(1), 47–60.

Kilic, A., Russell, S., Shim, E., & Pourdeyhimi, B. (2017). The charging and stability of electret filters. Fibrous Filter Media, 95–121.

Kotek, R., Afshari, M., Avci, H., & Najafi, M. (2017). Production of polyolefins. Polyolefin Fibres: Structure, Properties and Industrial Applications, 2nd Edition, 189–264. https://doi.org/10.1016/b978-0-08-101132-4.00007-2

Jasper, W. J., & Rasipuram, S. C. (2017). Plasma textiles as fibrous filter media. Fibrous Filter Media, pp. 191–210. https://doi.org/10.1016/b978-0-08-100573-6.00011-3

Shamey, R. (2017). Improving the coloration/dyeability of polyolefin fibres. Polyolefin Fibres: Structure, Properties and Industrial Applications, 2nd Edition, 359–388. https://doi.org/10.1016/b978-0-08-101132-4.00012-6

Barton, R. R., Joines, J. A., & Morrice, D. J. (2017). History of the winter simulation conference: Period of growth, consolidation, and innovation (1993–2007). 2017 Winter Simulation Conference (WSC), 87–99. https://doi.org/10.1109/wsc.2017.8247784

Alexopoulos, C., Joines, J. A., & Kuhl, M. E. (2017). History of the winter simulation conference: Modern period (2008–2017). 2017 Winter Simulation Conference (WSC), 100–114. https://doi.org/10.1109/wsc.2017.8247785

Caydamli, Y., Yildirim, E., Shen, J., Fang, X., Pasquinelli, M. A., Spontak, R. J., & Tonelli, A. E. (2017). Nanoscale considerations responsible for diverse macroscopic phase behavior in monosubstituted isobutyl-POSS/poly(ethylene oxide) blends. Soft Matter, 13(46), 8672–8677. https://doi.org/10.1039/c7sm01788j

Li, G. Q., Lee, H. J., & Michielsen, S. (2017). Design of abrasion resistant super-antiwetting nylon surfaces. New Journal of Chemistry, 41(22), 13593–13599. https://doi.org/10.1039/c7nj02807e

Shen, J. L., & Tonelli, A. E. (2017). Demonstrating unique behaviors of polymers. Journal of Chemical Education, 94(11), 1738–1745. https://doi.org/10.1021/acs.jchemed.7b00008

Mohiti-Asli, M., Risselada, M., Jacob, M., POURDEYHIMI, B. E. H. N. A. M., & Loboa, E. G. (2017). Creation and evaluation of new porcine model for investigation of treatments of surgical site infection. Tissue Engineering. Part C, Methods, 23(11), 795–803. https://doi.org/10.1089/ten.tec.2017.0024

Elsherbiny, D., Yildirim, E., El-Essawy, F., Abdel-Megied, A., & El-Shafei, A. (2017). Structure-property relationships: Influence of number of anchoring groups in triphenylamine-carbazole motifs on light harvesting and photovoltaic performance for dye-sensitized solar cells. Dyes and Pigments, 147, 491–504. https://doi.org/10.1016/j.dyepig.2017.08.022

Gurarslan, A., Joijode, A., Shen, J. L., Narayanan, G., Antony, G. J., Li, S. S., … Tonelli, A. E. (2017). [Review of Reorganizing polymer chains with cyclodextrins]. Polymers, 9(12).

Iezzi, B., Ankireddy, K., Twiddy, J., Losego, M. D., & Jur, J. S. (2017). Printed, metallic thermoelectric generators integrated with pipe insulation for powering wireless sensors. Applied Energy, 208, 758–765. https://doi.org/10.1016/j.apenergy.2017.09.073

Zhu, J., Ge, Y., Jasper, S., & Zhang, X. (2017). Physical characterization of electrospun nanofibers. Electrospun Nanofibers, Vol. 186, pp. 207–238. https://doi.org/10.1016/b978-0-08-100907-9.00009-x

Ding, Y., Freeman, H. S., & Parrillo-Chapman, L. (2017). Color gamut analysis and color fastness evaluation for textile inkjet printing application on polyester. Journal of Imaging Science and Technology, 61(5). https://doi.org/10.2352/j.imagingsci.technol.2017.61.5.050503

Zhu, J., Jasper, S., & Zhang, X. (2017). Chemical characterization of electrospun nanofibers. Electrospun Nanofibers, Vol. 186, pp. 181–206. https://doi.org/10.1016/b978-0-08-100907-9.00008-8

Zidan, Y., El-Shafei, A., Noshy, W., & Salim, E. (2017). A comparative study to evaluate conventional and nonconventional cleaning treatments of cellulosic paper supports. Mediterranean Archaeology and Archaeometry, 17(3), 337–353. https://doi.org/10.5281/zenodo.1005538

Wang, G. X., Babaahmadi, V., He, N. F., Liu, Y., Pan, Q., Montazer, M., & Gao, W. (2017). Wearable supercapacitors on polyethylene terephthalate fabrics with good wash fastness and high flexibility. Journal of Power Sources, 367, 34–41. https://doi.org/10.1016/j.jpowsour.2017.09.047

Jasper, W. J., & Rasipuram, S. (2017). Relationship between contact angle and contact line radius for micro to atto [10−6 to 10−18] liter size oil droplets. Journal of Molecular Liquids, 248, 920–926. https://doi.org/10.1016/j.molliq.2017.10.134

Gigax, J. G., Bradford, P. D., & Shao, L. (2017). Radiation-induced mechanical property changes of CNT yarn. Nuclear Instruments & Methods in Physics Research. Section B, Beam Interactions With Materials and Atoms, 409, 268–271. https://doi.org/10.1016/j.nimb.2017.04.050

Naik, P., Elmorsy, M. R., Su, R., Babu, D. D., El-Shafei, A., & Adhikari, A. V. (2017). New carbazole based metal-free organic dyes with D-Π-A-Π-A architecture for DSSCs: Synthesis, theoretical and cell performance studies. Solar Energy, 153, 600–610. https://doi.org/10.1016/j.solener.2017.05.088

Ding, Y., & Freeman, H. S. (2017). Mordant dye application on cotton: Optimisation and combination with natural dyes. Coloration Technology, 133(5), 369–375. https://doi.org/10.1111/cote.12288

Jenkins, T. L., Meehan, S., POURDEYHIMI, B. E. H. N. A. M., & Little, D. (2017). Meltblown polymer fabrics as candidate scaffolds for rotator cuff tendon tissue engineering. Tissue Engineering. Part A, 23(17-18), 958–967. https://doi.org/10.1089/ten.tea.2016.0470

Yu, Y. Y., Zhang, L. W., Yildiz, O., Deng, H. T., Zhao, C. H., Bradford, P. D., … Zhu, Y. Y. (2017). Investigation of microcombing parameters in enhancing the properties of carbon nanotube yarns. Materials & Design, 134, 181–187. https://doi.org/10.1016/j.matdes.2017.08.035

Uluskan, M., Godfrey, A. B., & Joines, J. A. (2017). Integration of Six Sigma to traditional quality management theory: An empirical study on organisational performance. Total Quality Management & Business Excellence, 28(13-14), 1526–1543. https://doi.org/10.1080/14783363.2016.1150173

McQuerry, M., DenHartog, E., & Barker, R. (2017). Effect of Self-Contained Breathing Apparatus (SCBA) on Heat Loss in Structural Firefighter Turnout Suits. AATCC Journal of Research, 4(5), 1–5. https://doi.org/10.14504/ajr.4.5.1

Narayanan, G., Boy, R., Gupta, B. S., & Tonelli, A. E. (2017). Analytical techniques for characterizing cyclodextrins and their inclusion complexes with large and small molecular weight guest molecules. Polymer Testing, 62, 402–439. https://doi.org/10.1016/j.polymertesting.2017.07.023

DenHartog, E. (2017). Variability in human responses when working in chemical protective impermeable suits. Medicine and Science in Sports and Exercise, 49(5), 510–510. https://doi.org/10.1249/01.mss.0000518304.79717.f8

Pratchayanan, D., Yang, J. C., Lewis, C. L., Thoppey, N., & Anthamatten, M. (2017). Thermomechanical insight into the reconfiguration of Diels-Alder networks. Journal of Rheology (New York, N.Y.), 61(6), 1359–1367. https://doi.org/10.1122/1.4997580

Naik, P., Su, R., Babu, D. D., El-Shafei, A., & Adhikari, A. V. (2017). Structurally simple D–A-type organic sensitizers for dye-sensitized solar cells: effect of anchoring moieties on the cell performance. Journal of the Iranian Chemical Society, 14(11), 2457–2466. https://doi.org/10.1007/s13738-017-1180-3

Wee, J., Hackney, D., Bradford, P., & Peters, K. (2017). Mechanisms of signal coupling to optical fiber for FBG sensor detection of Lamb waves. 2017 25th international conference on optical fiber sensors (ofs), 10323. https://doi.org/10.1117/12.2263278

Naik, P., Su, R., El-Shafei, A., & Adhikari, A. V. (2017). Improved photovoltaic performances of Ru (II) complex sensitized DSSCs by co-sensitization of carbazole based chromophores. Inorganic Chemistry Communications, 86, 241–245. https://doi.org/10.1016/j.inoche.2017.10.030

Chen, R., Hu, Y., Shen, Z., He, X., Cheng, Z., Pan, P., … Tang, Z. (2017). Highly mesoporous C nanofibers with graphitized pore walls fabricated via ZnCo2O4-induced activating-catalyzed-graphitization for long-lifespan lithium-ion batteries. J. Mater. Chem. A, 5(41), 21679–21687. https://doi.org/10.1039/c7ta05445a

Wells, B., Kumar, R., Reynolds, C. L., Peters, K., & Bradford, P. D. (2017). Highly anisotropic magneto-transport and field orientation dependent oscillations in aligned carbon nanotube/epoxy composites. Applied Physics Letters, 111(26). https://doi.org/10.1063/1.4999503

Najafi, M., Nasri, L., & Kotek, R. (2017). High-performance nylon fibers. Structure and Properties of High-Performance Fibers, 187, 199–244. https://doi.org/10.1016/b978-0-08-100550-7.00009-7

Cornelius, C., McCord, M., Bourham, M., & Hauser, P. (2017). Desizing of starch sized cotton fabrics with atmospheric pressure plasma. Cellulose, 24(12), 5685–5695. https://doi.org/10.1007/s10570-017-1509-1

Woloszczuk, S., Tuhin, M. O., Gade, S. R., Pasquinelli, M., Banaszak, M., & Spontak, R. (2017). Complex phase behavior and network characteristics of midblock-solvated triblock copolymers as physically cross-linked soft materials. ACS Applied Materials & Interfaces, 9(46), 39940–39944. https://doi.org/10.1021/acsami.7b14298

Chen, Z., Xiong, N., Ge, M., & Shamey, R. (2017). Characterization of color including temporal hue shift of a range of long-lasting phosphorescent/fluorescent (SiO_2/REC@SAOED) composites. Optical Materials Express, 7(11), 3909–3918. https://doi.org/10.1364/ome.7.003909

He, X., Hu, Y., Shen, Z., Chen, R., Wu, K., Cheng, Z., … Pan, P. (2017). Channelized carbon nanofiber with uniform-dispersed GeO2 as anode for long-lifespan lithium-ion batteries. Journal of Alloys and Compounds, 729, 313–322. https://doi.org/10.1016/j.jallcom.2017.09.038

Heo, J. S., Kim, T., Ban, S. G., Kim, D., Lee, J. H., Jur, J. S., … Park, S. K. (2017). Thread-like CMOS logic circuits enabled by reel-processed single-walled carbon nanotube transistors via selective doping. Advanced Materials, 29(31). https://doi.org/10.1002/adma.201701822

Patil, S. V., & Argyropoulos, D. S. (2017). [Review of Stable organic radicals in lignin: A review]. Chemsuschem, 10(17), 3284–3303. https://doi.org/10.1002/cssc.201700869

Park, Y., Rawat, P., & Ford, E. (2017). Role of Polymerized Micelles on the Calcium Carbonate Mineralization of Nanofibers. Industrial & Engineering Chemistry Research, 56(29), 8241–8250. https://doi.org/10.1021/ACS.IECR.7B00902

Gigax, J. G., Bradford, P. D., & Shao, L. (2017). Ion beam modification of carbon nanotube yarn in air and vacuum. Materials, 10(8). https://doi.org/10.3390/ma10080860

Leary, J. D., Maze, B., & POURDEYHIMI, B. E. H. N. A. M. (2017). Investigating activation of carbon fiber nonwovens for use as supercapacitor electrodes. Journal of the Textile Institute, 108(9), 1528–1536. https://doi.org/10.1080/00405000.2016.1260424

Oxenham, W., & Chen, X. G. (2017). Introduction to the late Professor John W. S. Hearle's publication list. Journal of the Textile Institute, 108(9), 1477–1488. https://doi.org/10.1080/00405000.2017.1337635

Helmy, H. M., Hauser, P., & El-Shafei, A. (2017). Influence of atmospheric plasma-induced graft polymerization of DADMAC into cotton on dyeing with acid dyes. Journal of the Textile Institute, 108(11), 1871–1878. https://doi.org/10.1080/00405000.2017.1298206

Pan, Q., Shim, E., POURDEYHIMI, B. E. H. N. A. M., & Gao, W. (2017). Highly conductive polypropylene-graphene nonwoven composite via interface engineering. Langmuir, 33(30), 7452–7458. https://doi.org/10.1021/acs.langmuir.7b01508

He, N. F., Pan, Q., Liu, Y. X., & Gao, W. (2017). Graphene-fiber-based supercapacitors favor N-methyl-2-pyrrolidone/ethyl acetate as the spinning solvent/coagulant combination. ACS Applied Materials & Interfaces, 9(29), 24568–24576. https://doi.org/10.1021/acsami.7b05982

He, X., Hu, Y., Shen, Z., Chen, R., Wu, K., Cheng, Z., … Pan, P. (2017). GeO x ultra-dispersed in microporous carbon nanofibers: a binder-free anode for high performance lithium-ion battery. Electrochimica Acta, 246, 981–989. https://doi.org/10.1016/j.electacta.2017.06.122

Zhu, P., Zhu, J., Zang, J., Chen, C., Lu, Y., Jiang, M., … al. (2017). A novel bi-functional double-layer rGO–PVDF/PVDF composite nanofiber membrane separator with enhanced thermal stability and effective polysulfide inhibition for high-performance lithium–sulfur batteries. Journal of Materials Chemistry A, 5(29), 15096–15104. https://doi.org/10.1039/c7ta03301j

Libraries, N. C. S. U. (2017). A Comparative Study on Two Ru<sup>II</sup> Complexes with Thiophene-Based Ancillary Ligands for High-Efficiency Dye-Sensitized Solar Cells. European Journal of Inorganic Chemistry, 2017(31), 3690–3697. https://doi.org/10.1002/ejic.201700468

Majikes, J. M., Ferraz, L. C. C., & LaBean, T. H. (2017). pH-driven actuation of DNA origami via parallel I-motif sequences in solution and on surfaces. Bioconjugate Chemistry, 28(7), 1821–1825. https://doi.org/10.1021/acs.bioconjchem.7b00288

DenHartog, E. A., Rubenstein, C. D., Deaton, A. S., & Bogerd, C. P. (2017). Variability in heat strain in fully encapsulated impermeable suits in different climates and at different work loads (vol 61, pg 248, 2017). Annals of Work Exposures and Health, Vol. 61, pp. 267–267.

DenHartog, E., Rubenstein, C. D., Deaton, A. S., & Bogerd, C. P. (2017). Variability in Heat Strain in Fully Encapsulated Impermeable Suits in Different Climates and at Different Work Loads. Annals of Work Exposures and Health, 61(2), 248–259. https://doi.org/10.1093/annweh/wxw019

Shen, J. L., Caydamli, Y., Gurarslan, A., Li, S. S., & Tonelli, A. E. (2017). The glass transition temperatures of amorphous linear aliphatic polyesters. Polymer, 124, 235–245. https://doi.org/10.1016/j.polymer.2017.07.054

Zheng, H. D., Zhang, J., & Zheng, L. J. (2017). Optimization of an ecofriendly dyeing process in an industrialized supercritical carbon dioxide unit for acrylic fibers. Textile Research Journal, 87(15), 1818–1827. https://doi.org/10.1177/0040517516659379

Li, X. Y., Li, J. Y., & Michielsen, S. (2017). Effect of yarn structure on wicking and its impact on bloodstain pattern analysis (BPA) on woven cotton fabrics. Forensic Science International, 276, 41–50. https://doi.org/10.1016/j.forsciint.2017.04.011

Ormond, R. B., & DenHartog, E. A. (2017). Effect of clothing layers on mass transfer of methyl salicylate vapor through CBRN materials in a cylinder test. Journal of Testing and Evaluation, 45(4), 1378–1387. https://doi.org/10.1520/jte20150491

Narayanan, G., Tekbudak, M. Y., Caydamli, Y., Dong, J., & Krause, W. E. (2017). Accuracy of electrospun fiber diameters: The importance of sampling and person-to-person variation. Polymer Testing, 61, 240–248. https://doi.org/10.1016/j.polymertesting.2017.04.017

Ashraf, S., Yildirim, E., Akhtar, J., Siddiqi, H. M., & El-Shafei, A. (2017). A comparative study of the influence of N,N′-dialkyl vs. N,N′-diaryl-based electron donor ancillary ligands on photocurrent and photovoltage in dye-sensitized solar cells (DSSCs). Physical Chemistry Chemical Physics, 19(31), 20847–20860. https://doi.org/10.1039/c7cp02530k

Ashraf, S., Akhtar, J., Siddiqi, H. M., & El-Shafei, A. (2017). Thiocyanate-free ruthenium(II) sensitizers with a bi-imidazole ligand in dye-sensitized solar cells (DSSCs). New Journal of Chemistry, 41(14), 6272–6277. https://doi.org/10.1039/c7nj01363a

Dincmen, M. G., Hauser, P. J., & Gursoy, N. C. (2017). Plasma induced graft polymerization of a fluorocarbon monomer on polyamide 6,6 fabrics. Tekstil Ve Konfeksiyon, 27(1), 38–45.

Naik, P., Su, R., Elmorsy, M. R., Babu, D. D., El-Shafei, A., & Adhikari, A. V. (2017). Molecular design and theoretical investigation of new metal-free heteroaromatic dyes with D-π-A architecture as photosensitizers for DSSC application. Journal of Photochemistry and Photobiology A: Chemistry, 345, 63–73. https://doi.org/10.1016/j.jphotochem.2017.05.033

Chen, C., Li, G., Zhu, J., Lu, Y., Jiang, M., Hu, Y., … Zhang, X. (2017). In-situ formation of tin-antimony sulfide in nitrogen-sulfur Co-doped carbon nanofibers as high performance anode materials for sodium-ion batteries. Carbon, 120, 380–391. https://doi.org/10.1016/j.carbon.2017.05.072

Cai, S. B., POURDEYHIMI, B. E. H. N. A. M., & Loboa, E. G. (2017). High-throughput fabrication method for producing a silver-nanoparticles-doped nanoclay polymer composite with novel synergistic antibacterial effects at the material interface. ACS Applied Materials & Interfaces, 9(25), 21105–21115. https://doi.org/10.1021/acsami.7b03793

Chen, R., Hu, Y., Shen, Z., Pan, P., He, X., Wu, K., … Cheng, Z. (2017). Facile fabrication of foldable electrospun polyacrylonitrile-based carbon nanofibers for flexible lithium-ion batteries. Journal of Materials Chemistry A, 5(25), 12914–12921. https://doi.org/10.1039/c7ta02528a

Shahariar, H., Soewardiman, H., & Jur, J. S. (2017). Fabrication and packaging of flexible and breathable patch antennas on textiles. Southeastcon 2017. https://doi.org/10.1109/secon.2017.7925306

Fang, X., Li, A., Yildiz, O., Shao, H. Q., Bradford, P. D., & ghosh. (2017). Enhanced anisotropic response of dielectric elastomer actuators with microcombed and etched carbon nanotube sheet electrodes. Carbon, 120, 366–373. https://doi.org/10.1016/j.carbon.2017.05.067

He, N. F., Yoo, S., Meng, J. J., Yildiz, O., Bradford, P. D., Park, S., & Gao, W. (2017). Engineering biorefinery residues from loblolly pine for supercapacitor applications. Carbon, 120, 304–312. https://doi.org/10.1016/j.carbon.2017.05.056

Luo, L., Li, D. W., Zang, J., Chen, C., Zhu, J. D., Qiao, H., … al. (2017). Carbon-coated magnesium ferrite nanofibers for lithium-ion battery anodes with enhanced cycling performance. Energy Technology, 5(8), 1364–1372. https://doi.org/10.1002/ente.201600686

Wee, J., Hackney, D., Bradford, P., & Peters, K. (2017). Bi-directional ultrasonic wave coupling to FBGs in continuously bonded optical fiber sensing. Applied Optics, 56(25), 7262–7268. https://doi.org/10.1364/ao.56.007262

Kolbasov, A., Sinha-Ray, S., Yarin, A. L., & POURDEYHIMI, B. E. H. N. A. M. (2017). Heavy metal adsorption on solution-blown biopolymer nanofiber membranes. Journal of Membrane Science, 530, 250–263. https://doi.org/10.1016/j.memsci.2017.02.019

Lu, C. H., Blackwell, C., Ren, Q. Y., & Ford, E. (2017). Effect of the coagulation bath on the structure and mechanical properties of gel-spun lignin/poly(vinyl alcohol) fibers. ACS Sustainable Chemistry & Engineering, 5(4), 2949–2959. https://doi.org/10.1021/acssuschemeng.6b02423

Farahbakhsh, N., Shahbeigi-Roodposhti, P., Sadeghifar, H., Venditti, R. A., & Jur, J. S. (2017). Effect of isolation method on reinforcing capability of recycled cotton nanomaterials in thermoplastic polymers. Journal of Materials Science, 52(9), 4997–5013. https://doi.org/10.1007/s10853-016-0738-2

Kuenemann, M. A., Szymczyk, M., Chen, Y. F., Sultana, N., Hinks, D., Freeman, H. S., … Vinueza, N. R. (2017). Weaver's historic accessible collection of synthetic dyes: A cheminformatics analysis. Chemical Science, 8(6), 4334–4339. https://doi.org/10.1039/c7sc00567a

Xia, X., Li, Z., Xue, L., Qiu, Y., Zhang, C., & Zhang, X. (2017). The electrochemical performance of SnSb/C nanofibers with different morphologies and underlying mechanism. Journal of Materials Research, 32(06), 1184–1193. https://doi.org/10.1557/jmr.2016.508

Fu, S., Farrell, M. J., & Hauser, P. J. (2017). Optimising the anionisation of cotton with 3-chloro-2-hydroxy-1-propanesulphonic acid sodium salt for dyeing with basic dyes. Coloration Technology, 133(3), 194–199. https://doi.org/10.1111/cote.12267

Pan, Q., Shim, E., POURDEYHIMI, B. E. H. N. A. M., & Gao, W. (2017). Nylon-graphene composite nonwovens as monolithic conductive or capacitive fabrics. ACS Applied Materials & Interfaces, 9(9), 8308–8316. https://doi.org/10.1021/acsami.7b00471

Yanilmaz, M., Zhu, J., Lu, Y., Ge, Y., & Zhang, X. (2017). High-strength, thermally stable nylon 6,6 composite nanofiber separators for lithium-ion batteries. Journal of Materials Science, 1(9), 5232–5241. https://doi.org/10.1007/s10853-017-0764-8

Yoon, J. H., Avci, H., Najafi, M., Nasri, L., Hudson, S. M., & Kotek, R. (2017). Development of high-tenacity, high-modulus poly(ethylene terephthalate) filaments via a next generation wet-melt-spinning process. Polymer Engineering and Science, 57(2), 224–230. https://doi.org/10.1002/pen.24406

Li, G. H., Nandgaonkar, A. G., Habibi, Y., Krause, W. E., Wei, Q. F., & Lucia, L. A. (2017). An environmentally benign approach to achieving vectorial alignment and high microporosity in bacterial cellulose/chitosan scaffolds (vol 7, pg 13678, 2017). RSC Advances, Vol. 7, pp. 16737–16737. https://doi.org/10.1039/c7ra90040f

Stano, K. L., Faraji, S., Yildiz, O., Akyildiz, H., Bradford, P. D., & Jur, J. S. (2017). Strong and resilient alumina nanotube and CNT/alumina hybrid foams with tuneable elastic properties. RSC Advances, 7(45), 27923–27931. https://doi.org/10.1039/c7ra02452e

Wee, J., Hackney, D. A., Bradford, P. D., & Peters, K. J. (2017). Simulating increased Lamb wave detection sensitivity of surface bonded fiber Bragg grating. Smart Materials & Structures, 26(4). https://doi.org/10.1088/1361-665x/aa646b

Fu, S., Farrell, M. J., Hauser, P. J., Hinks, D., Jasper, W. J., & Ankeny, M. A. (2017). Real-time dyebath monitoring of reactive dyeing on cationized cotton for levelness control: part 2—effects of leveling agents and dye dosing. Cellulose, 24(7), 3061–3071. https://doi.org/10.1007/s10570-017-1291-0

Yu, J., Shao, D. Y., Sun, C., Xu, C. H., & Hinks, D. (2017). Pilot-plant investigation on low-temperature bleaching of cotton fabric with TBCC-activated peroxide system. Cellulose, 24(6), 2647–2655. https://doi.org/10.1007/s10570-017-1276-z

Babaahmadi, V., Montazer, M., & Gao, W. (2017). Low temperature welding of graphene on PET with silver nanoparticles producing higher durable electro-conductive fabric. Carbon, 118, 443–451. https://doi.org/10.1016/j.carbon.2017.03.066

Mills, A., Hodges, R., & Jur, J. S. (2017). Human and environmental analysis of wearable thermal energy harvesting. Energy Conversion and Management, 143, 218–226. https://doi.org/10.1016/j.enconman.2017.04.002

Chen, Y., Hu, Y., Shen, Z., Chen, R., He, X., Zhang, X., … Wu, K. (2017). Hollow core–shell structured silicon@carbon nanoparticles embed in carbon nanofibers as binder-free anodes for lithium-ion batteries. Journal of Power Sources, 342, 467–475. https://doi.org/10.1016/j.jpowsour.2016.12.089

Rubenstein, C. D., DenHartog, E. A., Deaton, A. S., Bogerd, C. P., & DeKant, S. (2017). Fluid replacement advice during work in fully encapsulated impermeable chemical protective suits. Journal of Occupational and Environmental Hygiene, 14(6), 448–455. https://doi.org/10.1080/15459624.2017.1296230

McQuerry, M., DenHartog, E., & Barker, R. (2017). Evaluating turnout composite layering strategies for reducing thermal burden in structural firefighter protective clothing systems. Textile Research Journal, 87(10), 1217–1225. https://doi.org/10.1177/0040517516651101

Lu, Y., Lin, Y. L., Chen, Z. W., Hu, Q. Y., Liu, Y., Yu, S. J., … Gu, Z. (2017). Enhanced endosomal escape by light-fueled liquid-metal transformer. Nano Letters, 17(4), 2138–2145. https://doi.org/10.1021/acs.nanolett.6b04346

Amid, H., Maze, B., Flickinger, M. C., & POURDEYHIMI, B. E. H. N. A. M. (2017). Dynamic adsorption of ammonia: Apparatus, testing conditions, and adsorption capacities. Measurement Science & Technology, 28(5). https://doi.org/10.1088/1361-6501/aa6236

Aly, K., Li, A., & Bradford, P. D. (2017). Compressive piezoresistive behavior of carbon nanotube sheets embedded in woven glass fiber reinforced composites. Composites Part B: Engineering, 116, 459–470. https://doi.org/10.1016/j.compositesb.2016.11.002

Luo, L., Qiao, H., Xu, W. Z., Li, D. W., Zhu, J. D., Chen, C., … al. (2017). Tin nanoparticles embedded in ordered mesoporous carbon as high-performance anode for sodium-ion batteries. Journal of Solid State Electrochemistry, 21(5), 1385–1395. https://doi.org/10.1007/s10008-016-3501-3

Babu, D. D., Su, R., Naik, P., El-Shafei, A., & Adhikari, A. V. (2017). Synthesis and photovoltaic performance of a novel asymmetric dual-channel co-sensitizer for dye-sensitized solar cell beyond 10% efficiency. Dyes and Pigments, 141, 112–120. https://doi.org/10.1016/j.dyepig.2017.02.010

He, N., Yildiz, O., Pan, Q., Zhu, J., Zhang, X., Bradford, P. D., & Gao, W. (2017). Pyrolytic-carbon coating in carbon nanotube foams for better performance in supercapacitors. Journal of Power Sources, 343, 492–501. https://doi.org/10.1016/j.jpowsour.2017.01.091

Yoon, J. W., Park, Y., Kim, J., & Park, C. H. (2017). Multi-jet electrospinning of polystyrene/polyamide 6 blend: thermal and mechanical properties. Fashion and Textiles, 4. https://doi.org/10.1186/s40691-017-0090-4

Ciesielska-Wróbel, I., DenHartog, E., & Barker, R. (2017). Measuring the effects of structural turnout suits on firefighter range of motion and comfort. Ergonomics, 60(7), 997–1007. https://doi.org/10.1080/00140139.2016.1229044

Hossain, M. M., Son, S. B., & Hahn, J. R. (2017). In situ solution process for fabricating thermally and mechanically stable highly conductive ZnO-CNT fiber composites. Acta Physica Polonica. A, 131(1), 124–132. https://doi.org/10.12693/aphyspola.131.124

Hossain, M. M., Shima, H., Lee, I., & Hahn, J. R. (2017). In situ preparation of graphene-ZnO composites for enhanced graphite exfoliation and graphene-nylon-6 composite films. Journal of Applied Polymer Science, 134(27). https://doi.org/10.1002/app.45034

Uluskan, M., Godfrey, A. B., & Joines, J. A. (2017). Impact of competitive strategy and cost-focus on global supplier switching (reshore and relocation) decisions. Journal of the Textile Institute, 108(8), 1308–1318. https://doi.org/10.1080/00405000.2016.1245596

Lim, J., Powell, N., Lee, H., & Michielsen, S. (2017). Geometric impact of void space in woven fabrics on oil resistance or repellency. Journal of Materials Science, 52(13), 8149–8158. https://doi.org/10.1007/s10853-017-1022-9

Staszel, C., Sinha-Ray, S., Yarin, A. L., & POURDEYHIMI, B. E. H. N. A. M. (2017). Adhesion of blended polymer films. Polymer, 112, 92–101. https://doi.org/10.1016/j.polymer.2017.01.066

Yao, S. S., Mills, A., Malhotra, A., Lin, F. Y., Bozkurt, A., Muth, J. F., & Zhu, Y. (2017). A wearable hydration sensor with conformal nanowire electrodes. Advanced Healthcare Materials, 6(6). https://doi.org/10.1002/adhm.201770031

Rossi, T., Silva, P. M. S., De Moura, L. F., Araujo, M. C., Brito, J. O., & Freeman, H. S. (2017). Waste from eucalyptus wood steaming as a natural dye source for textile fibers. Journal of Cleaner Production, 143, 303–310. https://doi.org/10.1016/j.jclepro.2016.12.109

Rezaei, F., Dickey, M., Bourham, M., & Hauser, P. (2017). Surface Modification of PET Film via a Large Area Atmospheric Pressure Plasma: An Optical Analysis of the Plasma and Surface Characterization of the Polymer Film. Surface and Coatings Technology, 309, 371–381. https://doi.org/10.1016/j.surfcoat.2016.11.072

Shen, Z., Hu, Y., Chen, R., He, X., Chen, Y., Shao, H., … Wu, K. (2017). Split Sn-Cu Alloys on Carbon Nanofibers by One-step Heat Treatment for Long-Lifespan Lithium-Ion Batteries. Electrochimica Acta, 225, 350–357. https://doi.org/10.1016/j.electacta.2016.12.143

DenHartog, E., & Koerhuis, C. L. (2017). Mutual interaction effects between discomfort and cognitive task performance in clothing systems. Journal of the Textile Institute, 108(5), 664–673. https://doi.org/10.1080/00405000.2016.1179089

Kang, X. Y., Shetty, S., Garten, L., Ihlefeld, J. F., Trolier-McKinstry, S., & Maria, J. P. (2017). Enhanced dielectric and piezoelectric responses in zn1-xmgxo thin films near the phase separation boundary. Applied Physics Letters, 110(4). https://doi.org/10.1063/1.4973756

Kilic, A., Shim, E., & POURDEYHIMI, B. E. H. N. A. M. (2017). Effect of annealing on charging properties of electret fibers. Journal of the Textile Institute, 108(6), 987–991. https://doi.org/10.1080/00405000.2016.1207269

Lee, I., Son, S., Shin, T., & Hahn, J. R. (2017). Direct observation of the conformational transitions of single pyridine molecules on a Ag(110) surface induced by long-range repulsive intermolecular interactions. Journal of Chemical Physics, 146(1). https://doi.org/10.1063/1.4973379

Sadeghifar, H., Venditti, R., Jur, J., Gorga, R. E., & Pawlak, J. J. (2017). Cellulose-lignin biodegradable and flexible UV protection film. ACS Sustainable Chemistry & Engineering, 5(1), 625–631. https://doi.org/10.1021/acssuschemeng.6b02003

Lee, D., & Krim, H. (2017). 3d face recognition in the fourier domain using deformed circular curves. Multidimensional Systems and Signal Processing, 28(1), 105–127. https://doi.org/10.1007/s11045-015-0334-7

Venu, L. B. S., Shim, E., Anantharamaiah, N., & POURDEYHIMI, B. E. H. N. A. M. (2017). Structures and properties of hydroentangled nonwovens: effect of number of manifolds. Journal of the Textile Institute, 108(3), 301–313. https://doi.org/10.1080/00405000.2016.1165400

Faraji, S., Yildiz, O., Rost, C., Stano, K., Farahbakhsh, N., Zhu, Y. T., & Bradford, P. D. (2017). Radial growth of multi-walled carbon nanotubes in aligned sheets through cyclic carbon deposition and graphitization. Carbon, 111, 411–418. https://doi.org/10.1016/j.carbon.2016.10.012

Mohiti-Asli, M., Saha, S., Murphy, S. V., Gracz, H., POURDEYHIMI, B. E. H. N. A. M., Atala, A., & Loboa, E. G. (2017). Ibuprofen loaded pla nanofibrous scaffolds increase proliferation of human skin cells in vitro and promote healing of full thickness incision wounds in vivo. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 105(2), 327–339. https://doi.org/10.1002/jbm.b.33520

Ge, Y., Zhu, J., Dirican, M., Jia, H., Yanilmaz, M., Lu, Y., … Zhang, X. (2017). Fabrication and electrochemical behavior study of nano-fibrous sodium titanate composite. Materials Letters, 188, 176–179. https://doi.org/10.1016/j.matlet.2016.11.025

Abdelgawad, A. M., El-Naggar, M. E., Hudson, S. M., & Rojas, O. J. (2017). Fabrication and characterization of bactericidal thiol-chitosan and chitosan iodoacetamide nanofibres. International Journal of Biological Macromolecules, 94, 96–105. https://doi.org/10.1016/j.ijbiomac.2016.07.061

Lamba, N. M., Herson, D. S., Jindani, R., & KING, M. W. (2017). Evaluation of antimicrobial-treated fabric properties. AATCC Journal of Research, 4(1), 14–21. https://doi.org/10.14504/ajr.4.1.2

Shima, H., Hossain, M. M., Lee, I., Son, S., & Hahn, J. R. (2017). Carbon-ZnO core-shell nanospheres: Facile fabrication and application in the visible-light photocatalytic decomposition of organic pollutant dyes. Materials Chemistry and Physics, 185, 73–82. https://doi.org/10.1016/j.matchemphys.2016.10.007

Majikes, J. M., Nash, J. A., & LaBean, T. H. (2017). Search for effective chemical quenching to arrest molecular assembly and directly monitor dna nanostructure formation. Nanoscale, 9(4), 1637–1644. https://doi.org/10.1039/c6nr08433h

Li, Y., Zou, C., Shao, J., Zhang, X., & Li, Y. (2017). Preparation of SiO2/PS superhydrophobic fibers with bionic controllable micro–nano structure via centrifugal spinning. RSC Advances, 7(18), 11041–11048. https://doi.org/10.1039/c6ra25813a

Gurarslan, R., & Tonelli, A. E. (2017). [Review of Do we need to know and can we determine the complete macrostructures of synthetic polymers?]. Progress in Polymer Science, 65, 42–52. https://doi.org/10.1016/j.progpolymsci.2016.09.001

Barker, R. L., Ross, K. A., Andrews, J., & Deaton, A. S. (2017). Comparative studies on standard and new test methods for evaluating the effects of structural firefighting gloves on hand dexterity. Textile Research Journal, 87(3), 270–284. https://doi.org/10.1177/0040517516629143

Boes, K. S., Narron, R. H., Chen, Y. F., Park, S., & Vinueza, N. R. (2017). Characterization of biofuel refinery byproduct via selective electrospray ionization tandem mass spectrometry. Fuel, 188, 190–196. https://doi.org/10.1016/j.fuel.2016.10.016

Li, G. H., Nandgaonkar, A. G., Habibi, Y., Krause, W. E., Wei, Q. F., & Lucia, L. A. (2017). An Environmentally benign approach to achieving vectorial alignment and high microporosity in bacterial cellulose/chitosan scaffolds. RSC Advances, 7(23), 13678–13688. https://doi.org/10.1039/c6ra26049g