Textile Engineering, Chemistry & Science - 2020

Abbasi, M., Mojtahedi, M. R. M., & Kotek, R. (2020). Experimental study on texturability of filament yarns produced from recycled PET. TEXTILE RESEARCH JOURNAL. https://doi.org/10.1177/0040517520925859

Abdellah, I. M., & El-Shafei, A. (2020). Synthesis and characterization of novel tetra anchoring A(2)-D-D-D-A(2) architecture sensitizers for efficient dye-sensitized solar cells. SOLAR ENERGY, 198, 25–35. https://doi.org/10.1016/j.solener.2020.01.040

Agcayazi, T., Tabor, J., McKnight, M., Martin, I., Ghosh, T. K., & Bozkurt, A. (2020). Fully‐Textile Seam‐Line Sensors for Facile Textile Integration and Tunable Multi‐Modal Sensing of Pressure, Humidity, and Wetness. Advanced Materials Technologies. https://doi.org/10.1002/admt.202000155

Ahmad, Y. H., Mohamed, A. T., Alashraf, A., Matalqeh, M., El-Shafei, A., Al-Qaradawi, S. Y., & Aljaber, A. S. (2020). Highly porous PtPd nanoclusters synthesized via selective chemical etching as efficient catalyst for ethanol electro-oxidation. APPLIED SURFACE SCIENCE, 508. https://doi.org/10.1016/j.apsusc.2019.145222

Armstrong, D. P., Chatterjee, K., ghosh, & Spontak, R. (2020). Form-stable phase-change elastomer gels derived from thermoplastic elastomer copolyesters swollen with fatty acids. THERMOCHIMICA ACTA, 686. https://doi.org/10.1016/j.tca.2020.178566

Barnes, B. E., Jenkins, T. A., Stein, L. M., Mathers, R. T., Wicaksana, M., Pasquinelli, M. A., & Savin, D. A. (2020). Synthesis and Characterization of a Leucine-Based Block Co-Polypeptide: The Effect of the Leucine Zipper on Self-Assembly. Biomacromolecules, 5. https://doi.org/10.1021/acs.biomac.0c00420

Bioresorbable Polymers for Surgical Suture Applications. (2020). In Encyclopedia of Renewable and Sustainable Materials. https://doi.org/10.1016/b978-0-12-803581-8.11667-4

Chatterjee, K., Negi, A., Kim, K., Liu, J., & Ghosh, T. K. (2020). In-Plane Thermoelectric Properties of Flexible and Room-Temperature-Doped Carbon Nanotube Films. ACS Applied Energy Materials, 7. https://doi.org/10.1021/acsaem.0c00995

Chen, L., Yu, H., Li, W., Dirican, M., Liu, Y., & Zhang, X. (2020). Interlayer design based on carbon materials for lithium-sulfur batteries: a review. JOURNAL OF MATERIALS CHEMISTRY A, Vol. 8, pp. 10709–10735. https://doi.org/10.1039/d0ta03028g

Cheng, Z., Hu, Y., Wu, K., Xing, Y., Pan, P., Jiang, L., … Zhang, X. (2020). Si/TiO2/Ti2O3 composite carbon nanofiber by one-step heat treatment with highly enhanced ion/electron diffusion rates for next-generation lithium-ion batteries. ELECTROCHIMICA ACTA, 337. https://doi.org/10.1016/j.electacta.2020.135789

Ding, Y., Szymczyk, M., Mehraban, N., Lim, J., Parrillo-Chapman, L., El-Shafei, A., & Freeman, H. S. (2020). Molecular and excited state properties of photostable yellow disperse dyes. JOURNAL OF MOLECULAR STRUCTURE, 1207. https://doi.org/10.1016/j.molstruc.2020.127815

Elmorsy, M. R., Lyu, L., Su, R., Abdel-Latif, E., Badawy, S. A., El-Shafei, A., & Fadda, A. A. (2020). Co-sensitization of the HD-2 complex with low-cost cyanoacetanilides for highly efficient DSSCs. PHOTOCHEMICAL & PHOTOBIOLOGICAL SCIENCES, 19(2), 281–288. https://doi.org/10.1039/c9pp00381a

Elmorsy, M. R., Su, R., Abdel-Latif, E., Badawy, S. A., El-Shafei, A., & Fadda, A. A. (2020). New cyanoacetanilides based dyes as effective co-sensitizers for DSSCs sensitized with ruthenium (II) complex (HD-2). JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS. https://doi.org/10.1007/s10854-020-03337-3

Huang, B., Wang, M., Zhang, X., Xu, G., & Gu, Y. (2020). Optimized preparation of LiNi0.6Mn0.2Co0.2O2 with single crystal morphology cathode material for lithium-ion batteries. IONICS, 26(6), 2689–2698. https://doi.org/10.1007/s11581-020-03445-4

Interfacial characteristics of carbon nanotube-polyimide nanocomposite by molecular dynamics simulation. (2020). Nanotechnology Reviews. https://doi.org/10.1515/ntrev-2020-0012

Lavoie, J. H., Rojas, O. J., Khan, S. A., & Shim, E. (2020). Migration Effects of Fluorochemical Melt Additives for Alcohol Repellency in Polypropylene Nonwoven Materials. ACS Applied Materials & Interfaces, 7. https://doi.org/10.1021/acsami.0c10144

Sapkota, K. P., Lee, I., Hanif, M. A., Islam, M. A., Akter, J., & Hahn, J. R. (2020). Enhanced Visible-Light Photocatalysis of Nanocomposites of Copper Oxide and Single-Walled Carbon Nanotubes for the Degradation of Methylene Blue. CATALYSTS, 10(3). https://doi.org/10.3390/catal10030297

Sayem, A. S. M., Teay, S. H., Shahariar, H., Fink, P. L., & Albarbar, A. (2020). [Review of Review on Smart Electro-Clothing Systems (SeCSs)]. SENSORS, 20(3). https://doi.org/10.3390/s20030587

Tonelli, A. E., & Edwards, J. F. (2020). Are poly(p-phenylene terephthalamide) (Kevlar (R)) and other liquid crystalline polymers conformationally rigid? POLYMER, 193. https://doi.org/10.1016/j.polymer.2020.122342

Xu, N., Ning, L., Chen, S., Hao, Z., Xiao, C., Zhang, X., & Feng, Y. (2020). Melt-spun modified poly (styrene-co-butyl acrylate) fiber as a carrier to support manganese oxide and its application in dye wastewater decolorization. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH. https://doi.org/10.1007/s11356-020-09105-4