Nuclear Engineering - 2006 Bourham, M. (2006). Atmospheric Pressure Plasmas: New Trends in Plasma Applications. AVS 2006 meeting. Presented at the AVS 2006 meeting, San Francisco, CA. Bourham, M., & Gawish, S. (2006). Production and Application of Novel Insecticidal and Antimicrobial Textiles Using Atmospheric Pressure Plasmas [Final technical Report]. NSF and US State Department on Joint USA-Egypt collaborative research. Harp, J. M., Martin, E. H., Hawari, A. I., & Bourham, M. A. (2006). Studying TRISO Fuel Failure Using Passive Gamma-Ray Spectrometry. ANS Transactions, 94, 672–673. Wang, J., Zhou, Y., Lin, Z., Liao, T., & He, L. F. (2006). First-principles prediction of the mechanical properties and electronic structure of ternary aluminum carbide Zr3 Al3 C5. Physical Review B - Condensed Matter and Materials Physics, 73(13). https://doi.org/10.1103/PhysRevB.73.134107 Lin, Z. J., Zhuo, M. J., He, L. F., Zhou, Y. C., Li, M. S., & Wang, J. Y. (2006). Atomic-scale microstructures of Zr2Al3C4 and Zr3Al3C5 ceramics. Acta Materialia, 54(14), 3843–3851. https://doi.org/10.1016/j.actamat.2006.02.052 Ivanov, K. N. (2006). Introduction to the special issue on the OECD/DOE/CEA V1000CT-1 benchmark. Progress in Nuclear Energy, 48(8), 727. https://doi.org/10.1016/j.pnucene.2006.07.002 Ivanov, B. D., Aniel, S., Siltanen, P., Royer, E., & Ivanov, K. N. (2006). Impact of cross-section generation procedures on the simulation of the VVER-1000 pump startup experiment in the OECD/DOE/CEA V1000CT benchmark by coupled 3D thermal-hydraulics/neutron kinetics models. Progress in Nuclear Energy, 48(8), 746–763. https://doi.org/10.1016/j.pnucene.2006.06.003 Yang, G., Jie, W. Q., Jhang, Q. Y., Wang, T., Li, Q., & Hua, H. (2006). Effects of two-step annealing on properties of Cd1-xZnxTe single crystals. Transactions of Nonferrous Metals Society of China, 16, s174–s177. https://doi.org/10.1016/S1003-6326(06)60169-6 Li, Q., Jie, W. Q., Fu, L., Yang, G., Zha, G. Q., Wang, T., & Bai, X. X. (2006). Electrical properties and electrical field in depletion layer for CZT crystals. Transactions of Nonferrous Metals Society of China, 16, s75–s78. https://doi.org/10.1016/S1003-6326(06)60146-5 Li, Q., Jie, W., Fu, L., Wang, T., Yang, G., Bai, X., & Zha, G. (2006). Optical and electrical properties of indium-doped Cd0.9Zn0.1Te crystal. Journal of Crystal Growth, 295(2), 124–128. https://doi.org/10.1016/j.jcrysgro.2006.07.030 Yang, G., & Jie, W. (2006). Photoluminescence analysis of Cd1−xZnxTe single crystals annealed by a two-step method. Journal of Crystal Growth, 294(2), 250–253. https://doi.org/10.1016/j.jcrysgro.2006.06.016 Zha, G., Jie, W., Li, Q., Zeng, D., Yang, G., Bai, X., … Xu, F. (2006). The study on the surface state of CdZnTe (110) surface. Applied Surface Science, 252(24), 8421–8423. https://doi.org/10.1016/j.apsusc.2005.11.061 Kaoumi, D., Motta, A. T., & Birtcher, R. C. (2006). Grain growth in Zr–Fe thin films during in situ ion irradiation in a TEM. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 242(1-2), 490–493. https://doi.org/10.1016/j.nimb.2005.08.158 Kolev, N., Petrov, N., Ivanov, B., & Ivanov, K. (2006). Simulation of the VVER-1000 pump start-up experiment of the OECD V1000CT benchmark with CATHARE and TRAC-PF1. Progress in Nuclear Energy, 48(8), 922–936. https://doi.org/10.1016/j.pnucene.2006.07.003 Bousbia Salah, A., Vedovi, J., D'Auria, F., Galassi, G., & Ivanov, K. (2006). Analysis of the VVER1000 coolant trip benchmark using the coupled RELAP5/PARCS code. Progress in Nuclear Energy, 48(8), 806–819. https://doi.org/10.1016/j.pnucene.2006.06.005 Ivanov, B. D., Ivanov, K. N., Royer, E., Aniel, S., Bieder, U., Kolev, N., & Groudev, P. (2006). OECD/DOE/CEA VVER-1000 coolant transient (V1000CT) benchmark – A consistent approach for assessing coupled codes for RIA analysis. Progress in Nuclear Energy, 48(8), 728–745. https://doi.org/10.1016/j.pnucene.2006.06.002 Shkarupa, A., Kadenko, I., Malanich, A., Kovtonyuk, A., & Ivanov, K. (2006). Comparative RELAP5-3D analysis in support of the NPP DBA analysis in Ukraine. Progress in Nuclear Energy, 48(8), 891–911. https://doi.org/10.1016/j.pnucene.2006.06.001 Reitsma, F., Strydom, G., de Haas, J. B. M., Ivanov, K., Tyobeka, B., Mphahlele, R., … Sikik, U. E. (2006). The PBMR steady-state and coupled kinetics core thermal-hydraulics benchmark test problems. Nuclear Engineering and Design, 236(5-6), 657–668. https://doi.org/10.1016/j.nucengdes.2005.12.007 Gozalvez, J. M., Yilmaz, S., Alim, F., Ivanov, K., & Levine, S. H. (2006). Sensitivity study on determining an efficient set of fuel assembly parameters in training data for designing of neural networks in hybrid genetic algorithms. Annals of Nuclear Energy, 33(5), 457–465. https://doi.org/10.1016/j.anucene.2005.12.006 Yilmaz, S., Ivanov, K., Levine, S., & Mahgerefteh, M. (2006). Application of genetic algorithms to optimize burnable poison placement in pressurized water reactors. Annals of Nuclear Energy, 33(5), 446–456. https://doi.org/10.1016/j.anucene.2005.11.012 Yilmaz, S., Ivanov, K., Levine, S., & Mahgerefteh, M. (2006). Development of enriched Gd-155 and Gd-157 burnable poison designs for a PWR core. Annals of Nuclear Energy, 33(5), 439–445. https://doi.org/10.1016/j.anucene.2005.11.011 Cuervo, D., Avramova, M., Ivanov, K., & Miró, R. (2006). Evaluation and enhancement of COBRA-TF efficiency for LWR calculations. Annals of Nuclear Energy, 33(9), 837–847. https://doi.org/10.1016/j.anucene.2006.03.011 Klingensmith, J. J., Azmy, Y. Y., Gehin, J. C., & Orsi, R. (2006). Tort solutions to the three-dimensional MOX benchmark, 3-D Extension C5G7MOX. Progress in Nuclear Energy, 48(5), 445–455. https://doi.org/10.1016/j.pnucene.2006.01.011 Alim, F., Bekar, K., Ivanov, K., Unlu, K., Brenizer, J., & Azmy, Y. (2006). Modeling and optimization of existing beam port facility of PSBR. Annals of Nuclear Energy, 33(17-18), 1391–1395. https://doi.org/10.1016/j.anucene.2006.10.007 Dinh, N., Bürger, M., & Lohnert, G. (2006). Introduction to the Festschrift honoring the 70th Birthday of Professor Bal Raj Sehgal. Nuclear Engineering and Design, 236(19-21), 1939–1940. https://doi.org/10.1016/j.nucengdes.2006.04.029 Cadinu, F., Kozlowski, T., & Dinh, T.-N. (2006). RELAP5 performance in predicting critical power in a BWR fuel bundle. Transactions of the American Nuclear Society, 95, 650–651. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33845532848&partnerID=MN8TOARS Dinh, T. N., Nourgaliev, R. R., & Theofanous, T. G. (2006). On the numerical simulation of acceleration-driven multi-fluid mixing. Multiphase Science and Technology, 18(3), 199–230. https://doi.org/10.1615/MultScienTechn.v18.i3.10 Nourgaliev, R., Dinh, N., Nguyen, L., & Theofanous, T. (2006). Treatment of particle collisions in direct numerical simulations of high speed compressible flows. In Fluid Mechanics and its Applications (Vol. 81, pp. 247–259). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84859934549&partnerID=MN8TOARS Theofanous, T., Nourgaliev, R., Li, G., & Dinh, N. (2006). Compressible multi-hydrodynamics (CMH): Breakup, mixing and dispersal of liquids/solids in high speed flows. In Fluid Mechanics and its Applications (Vol. 81, pp. 353–369). https://doi.org/10.1007/1-4020-4977-3_35 Nourgaliev, R., Dinh, N., & Theofanous, T. (2006). Adaptive characteristics-based matching (aCBM): A method for interfacial dynamics in compressible multiphase flows. In Fluid Mechanics and its Applications (Vol. 81, pp. 341–352). https://doi.org/10.1007/1-4020-4977-3_34 Theofanous, T. G., & Dinh, T. N. (2006). High heat flux boiling and burnout as microphysical phenomena: Mounting evidence and opportunities. Multiphase Science and Technology, 18(3), 251–276. https://doi.org/10.1615/MultScienTechn.v18.i3.30 Tran, C. T., & Dinh, T. N. (2006). Analysis of melt pool heat transfer in a BWR lower head. Transactions of the American Nuclear Society, 95, 629–631. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33845527584&partnerID=MN8TOARS Nourgaliev, R. R., Dinh, T. N., & Theofanous, T. G. (2006). Adaptive characteristics-based matching for compressible multifluid dynamics. Journal of Computational Physics, 213(2), 500–529. https://doi.org/10.1016/j.jcp.2005.08.028 C, S. S., Alexander, P., Theodoros, P., P, H. J., S, G. D., & J, H. D. (2006). Plasma Generation And Control Using Dual Frequency Rf Signals. Retrieved from https://www.lens.org/093-426-771-044-119 Dean, S. W., & Hayes, R. (2006). A Light-Water-Cooled Nuclear Reactor of Natural Uranium and Beryllium. Journal of ASTM International, 3(8), 100274. https://doi.org/10.1520/jai100274 Mishra, K. K., Hawari, A. I., & Gillette, V. H. (2006). Design and performance of a thermal neutron imaging facility at the North Carolina State University PULSTAR reactor. IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 53(6), 3904–3911. https://doi.org/10.1109/tns.2006.884323 Han, X. G., Gardner, R. P., & Metwally, W. A. (2006). CEARCPG: A Monte Carlo simulation code for normal and coincidence prompt-gamma-ray neutron activation analysis. Nuclear Science and Engineering, 155(1), 143–153. https://doi.org/10.13182/nse07-a2652 Guduru, R. K., Darling, K. A., Scattergood, R. O., Koch, C. C., Murty, K. L., Bakkal, M., & Shih, A. J. (2006). Shear punch tests for a bulk metallic glass. INTERMETALLICS, 14(12), 1411–1416. https://doi.org/10.1016/j.intermet.2006.01.052 Su, B., Zhao, Z., Chen, J., & Hawari, A. I. (2006). Assessment of on-line burnup monitoring of pebble bed reactor fuel by passive neutron counting. PROGRESS IN NUCLEAR ENERGY, 48(7), 686–702. https://doi.org/10.1016/j.pnucene.2006.06.013 Kim, C. H., Bourham, M. A., & Doster, J. M. (2006). A wide-beam X-ray source suitable for diffraction enhanced imaging applications. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 566(2), 713–721. https://doi.org/10.1016/j.nima.2006.07.041 Lu, W., Wechsler, M. S., & Dai, Y. (2006, September 15). The NCSU radiation damage database; proton-induced damage energy and application to radiation damage at SINQ. JOURNAL OF NUCLEAR MATERIALS, Vol. 356, pp. 280–286. https://doi.org/10.1016/j.jnucmat.2006.05.011 Scheffing, C. C., Jagannadham, K., Yim, M.-S., Bourham, M. A., Farmer, J. C., Haslam, J. J., … Yang, N. Y. (2006). Properties of titanium-nitride for high-level waste packaging enhancement. NUCLEAR TECHNOLOGY, 156(2), 213–221. https://doi.org/10.13182/NT156-213 Hiruta, H., & Anistratov, D. Y. (2006). Homogenization method for the two-dimensional low-order quasi-diffusion equations for reactor core calculations. NUCLEAR SCIENCE AND ENGINEERING, 154(3), 328–352. https://doi.org/10.13182/NSE06-A2637 Youssef, K. M., Scattergood, R. O., Murty, K. L., & Koch, C. C. (2006). Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility. SCRIPTA MATERIALIA, 54(2), 251–256. https://doi.org/10.1016/j.scriptamat.2005.09.028 Bures, B. L., Donohue, K. V., Roe, R. M., & Bourham, M. A. (2006). Nonchemical dielectric barrier discharge treatment as a method of insect control. IEEE TRANSACTIONS ON PLASMA SCIENCE, 34(1), 55–62. https://doi.org/10.1109/TPS.2005.863595 Yim, M.-S. (2006). Nuclear nonproliferation and the future expansion of nuclear power. PROGRESS IN NUCLEAR ENERGY, 48(6), 504–524. https://doi.org/10.1016/j.pnucene.2005.10.003 Donohue, K. V., Bures, B. L., Bourham, M. A., & Roe, R. M. (2006). Mode of action of a novel nonchemical method of insect control: Atmospheric pressure plasma discharge. JOURNAL OF ECONOMIC ENTOMOLOGY, 99(1), 38–47. https://doi.org/10.1603/0022-0493(2006)099[0038:MOAOAN]2.0.CO;2 Yim, M. S., & Caron, F. (2006). [Review of Life cycle and management of carbon-14 from nuclear power generation]. PROGRESS IN NUCLEAR ENERGY, 48(1), 2–36. https://doi.org/10.1016/j.pnucene.2005.04.002 Blunden, A., Dyson, S., Murray, R., & Schramme, M. (2006). Histopathology in horses with chronic palmar foot pain and age-matched controls. Part 2: The deep digital flexor tendon. EQUINE VETERINARY JOURNAL, 38(1), 23–27. https://doi.org/10.2746/042516406775374342 Blunden, A., Dyson, S., Murray, R., & Schramme, M. (2006). Histopathology in horses with chronic palmar foot pain and age-matched controls. Part 1: Navicular bone and related structures. Equine Veterinary Journal, 38(1), 15–22. https://doi.org/10.2746/042516406775374298 Seok, C. S., Bae, B. K., Koo, J. M., & Murty, K. L. (2006, April). The properties of the ring and burst creep of ZIRLO cladding. ENGINEERING FAILURE ANALYSIS, Vol. 13, pp. 389–397. https://doi.org/10.1016/j.engfailanal.2005.02.009 Guduru, R. K., Nagasekhar, A. V., Scattergood, R. O., Koch, C. C., & Murty, K. L. (2006). Finite element analysis of a shear punch test. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 37A(5), 1477–1483. https://doi.org/10.1007/s11661-006-0092-0 Guduru, R. K., Scattergood, R. O., Koch, C. C., Murty, K. L., Guruswamy, S., & McCarter, M. K. (2006). Mechanical properties of nanocrystalline Fe-Pb and Fe-Al2O3. SCRIPTA MATERIALIA, 54(11), 1879–1883. https://doi.org/10.1016/j.scriptamat.2006.02.014 Rajulapati, K. V., Scattergood, R. O., Murty, K. L., Duscher, G., & Koch, C. C. (2006). Effect of Pb on the mechanical properties of nanocrystalline Al. SCRIPTA MATERIALIA, 55(2), 155–158. https://doi.org/10.1016/j.scriptamat.2006.03.051 Murty, K. L., & Charit, I. (2006). [Review of Texture development and anisotropic deformation of zircaloys]. PROGRESS IN NUCLEAR ENERGY, 48(4), 325–359. https://doi.org/10.1016/j.pnucene.2005.09.011