Textile and Apparel, Technology and Management - 2022 Hamouda, T., & Aly, N. M. (2022). Manufacturing and design of coir fiber composites. In Coir Fiber and its Composites. https://doi.org/10.1016/b978-0-443-15186-6.00077-1 Hamouda, T., & Aly, N. M. (2022). Circular Economy of Composite Materials Using Waste Jute Fibers and Recycled Polyester Fibers as a Reinforcement for Packaging Applications. Egyptian Journal of Chemistry. https://doi.org/10.21608/ejchem.2022.159418.6881 Hamouda, T., Aly, N. M., & Elshakankery, M. H. (2022). An experimental study on the interaction between braiding structural parameters and their effects on ropes mechanical properties. Journal of Industrial Textiles. https://doi.org/10.1177/1528083720960732 Modeling tensile behavior of 3D orthogonal woven green composites considering variability of natural fibers. (2022). Journal of the Textile Institute. https://doi.org/10.1080/00405000.2021.1927938 Shaker, K., & Nawab, Y. (2022). Preface. In SpringerBriefs in Materials (p. vii). https://doi.org/10.1016/B978-0-08-012822-1.50004-8 Thermo-physiological Comfort of Woven Fabrics Made from Different Cellulosic Yarns. (2022). Journal of Natural Fibers. https://doi.org/10.1080/15440478.2020.1852997 Influence of inlay yarn type and stacking sequence on mechanical performance of knitted uni-directional thermoplastic composite prepregs. (2022). Journal of Industrial Textiles. https://doi.org/10.1177/1528083720947727 Optimizing the Auxetic Geometry Parameters in Few Yarns Based Auxetic Woven Fabrics for Enhanced Mechanical Properties Using Grey Relational Analysis. (2022). Journal of Natural Fibers. https://doi.org/10.1080/15440478.2020.1870611 Mechanical performance of 3D woven jute/green epoxy composites with novel weaving patterns. (2022). Journal of Industrial Textiles. https://doi.org/10.1177/1528083720948025 Cellulosic Fillers Extracted from Argyreia Speciose Waste: A Potential Reinforcement for Composites to Enhance Properties. (2022). Journal of Natural Fibers. https://doi.org/10.1080/15440478.2020.1856271 Three-dimensional printable metamaterial intramedullary nails with tunable strain for the treatment of long bone fractures. (2022). Materials & Design. https://doi.org/10.1016/J.MATDES.2022.110942 The Role and Applications of Aerogels in Textiles. (2022). Advances in Materials Science and Engineering. https://doi.org/10.1155/2022/2407769 Recent trends in water purification using electrospun nanofibrous membranes. (2022). International Journal of Environmental Science and Technology. https://doi.org/10.1007/S13762-021-03603-9 Optimization of Flame Retardancy & Mechanical Performance of Jute-glass/Epoxy Hybrid Composites. (2022). Fibers and Polymers. https://doi.org/10.1007/S12221-022-4049-8 Numerical modeling of suspension impregnation through a fibrous medium: Application to the CRTM process. (2022). Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/07316844221142017 Mode I Fatigue of Fibre Reinforced Polymeric Composites: A Review. (2022). Polymers. https://doi.org/10.3390/POLYM14214558 Investigating the Thermo-Physiological Comfort Properties of Weft-Knitted Smart Structures Having a Negative Poisson's Ratio. (2022). Advances in Materials Science and Engineering. https://doi.org/10.1155/2022/1896634 Effect of surface treatment on the performance of composite-composite and composite-metal adhesive joints. (2022). Polymer Composites. https://doi.org/10.1002/PC.26940 Effect of shear thickening fluid on mechanical properties of para-aramid fabrics. (2022). Journal of the Textile Institute. https://doi.org/10.1080/00405000.2022.2149680 An economical and environmentally benign approach to extract banana fibres from agricultural waste for fibre reinforced composites. (2022). Journal of the Textile Institute. https://doi.org/10.1080/00405000.2021.1957293 Shaker, K., & Nawab, Y. (2022). Wood and Agriculture Waste Fibers. In SpringerBriefs in Materials (pp. 45–55). https://doi.org/10.1007/978-3-030-97413-8_5 Umair, M., Javaid, M. U., Nawab, Y., Jabbar, M., Riaz, S., Abid, H. A., & Shaker, K. (2022). Thermal properties of woven fabric as a function of its structural parameters: experimentation and modeling. Research Journal of Textile and Apparel. https://doi.org/10.1108/RJTA-10-2021-0123 Shaker, K., & Nawab, Y. (2022). Performance of Green Composites. In SpringerBriefs in Materials (pp. 57–65). https://doi.org/10.1007/978-3-030-97413-8_6 Arif, S., Nawab, Y., Shaker, K., & Umair, M. (2022). Mechanical performance of flame retardant and antibacterial glass-carbon/epoxy hybrid composites for furniture applications. Journal of Industrial Textiles. https://doi.org/10.1177/15280837221080185 Shaker, K., & Nawab, Y. (2022). Lignocellulosic Fiber Structure. In SpringerBriefs in Materials (pp. 11–19). https://doi.org/10.1007/978-3-030-97413-8_2 Umair, M., Hussain, M., Shaker, K., & Nawab, Y. (2022). Impact Performance of Three-dimensional Woven Composites with Novel Binding Yarn Patterns. Journal of Natural Fibers. https://doi.org/10.1080/15440478.2022.2064399 Shaker, K., & Nawab, Y. (2022). Green Composite Solutions. In SpringerBriefs in Materials (pp. 1–9). https://doi.org/10.1007/978-3-030-97413-8_1 Shaker, K., & Nawab, Y. (2022). Fruit, Seed and Leaf Fibers. In SpringerBriefs in Materials (pp. 21–32). https://doi.org/10.1007/978-3-030-97413-8_3 Umair, M., Shaker, K., Javaid, M. U., Hussain, M., Kashif, M., & Nawab, Y. (2022). Effect of weaving patterns on damage resistance of 3D woven jointless T and H shaped reinforcements. Mechanics of Advanced Materials and Structures, 29(1), 104–117. https://doi.org/10.1080/15376494.2020.1751356 Ahmad, H. S., Hussain, T., Nawab, Y., & Salamat, S. (2022). Effect of various dielectric and magnetic nanofillers on microwave absorption properties of carbon fiber reinforced composites structures. Ceramics International, 48(14), 19882–19890. https://doi.org/10.1016/j.ceramint.2022.03.263 Rehman, M. M., Shaker, K., & Nawab, Y. (2022). Effect of poly ether ether ketone particles on v-notched shear and drop weight impact behavior of carbon/epoxy composite. Polymer Composites, 43(5), 3219–3227. https://doi.org/10.1002/pc.26612 Damage-Tolerant Woven Glass Fiber Composites Developed Using Polyvinyl Butyral (PVB) Unsaturated Polyester (UP) Blends. (2022). Advances in Materials Science and Engineering. https://doi.org/10.1155/2022/9077788 A Review of the Fabrication Methods, Testing, and Performance of Face Masks. (2022). International Journal of Polymer Science. https://doi.org/10.1155/2022/2161869 Shah, A. A., Shahid, M., Hardy, J. G., Siddiqui, N. A., Kennedy, A. R., Gul, I. H., … YNawab. (2022). Effects of Braid Angle and Material Modulus on the Negative Poisson’s Ratio of Braided Auxetic Yarns. Crystals, 12(6). https://doi.org/10.3390/cryst12060781 Nazir, M. U., Javaid, M. U., Shaker, K., Nawab, Y., Hussain, T., & Umair, M. (2022). Effect of picking sequence on thermo-physiological comfort of bilayer woven fabrics. Research Journal of Textile and Apparel. https://doi.org/10.1108/RJTA-10-2021-0120 Hussain, M., Imad, A., Nawab, Y., Saouab, A., Herbelot, C., & Kanit, T. (2022). Effect of matrix and hybrid reinforcement on fibre metal laminates under low–velocity impact loading. Composite Structures, 288. https://doi.org/10.1016/j.compstruct.2022.115371 Ahmad, H. S., Hussain, T., Nawab, Y., & Salamat, S. (2022). Effect of dielectric and magnetic nanofillers on electromagnetic interference shielding effectiveness of carbon/epoxy composites. Journal of Composite Materials, 56(1), 69–82. https://doi.org/10.1177/00219983211052615 Rehman, M. M., Shaker, K., & Nawab, Y. (2022). Effect of PEEK Particles on Physiomechanical Behavior of Carbon/Epoxy Composite. International Journal of Polymer Science, 2022. https://doi.org/10.1155/2022/8161684 Shah, A. A., Shahid, M., Siddiqui, N. A., YNawab, & Iqbal, M. (2022). Effect of Geometric Arrangement on Mechanical Properties of 2D Woven Auxetic Fabrics. Textiles. https://doi.org/10.3390/textiles2040035 Ahmad, H. S., Hussain, T., Nawab, Y., & Salamat, S. (2022). Effect of Different Dielectric and Magnetic Nanoparticles on the Electrical, Mechanical, and Thermal Properties of Unidirectional Carbon Fiber-Reinforced Composites. International Journal of Polymer Science, 2022. https://doi.org/10.1155/2022/5952450 Hameed, M. N., Nawab, Y., Zubair, M., Umair, M., Ahmad, Z., & Shaker, K. (2022). Double face fabrics: a tailorable solution for puncture resistant applications. Journal of the Textile Institute, 113(6), 1197–1205. https://doi.org/10.1080/00405000.2021.1918882 Hussain, M., Arif, S., Nawab, Y., Shaker, K., & Umair, M. (2022). Development of functional (flame-retardant and anti-bacterial) and hybrid (carbon-glass/epoxy) composites with improved low velocity impact response. Polymer Composites, 43(2), 889–905. https://doi.org/10.1002/pc.26418 Ahrari, M., Karahan, M., Hussain, M., Nawab, Y., Khan, A., & Shirazi, A. A. (2022). Development of Anti-Bacterial and Anti-Viral Nonwoven Surgical Masks for Medical Applications,Razvoj protibakterijskih in protivirusnih netkanih kirurških mask za medicinske namene. Tekstilec, Vol. 65, pp. 135–146. https://doi.org/10.14502/tekstilec.65.2022020 Jamal, H., Ahmad, F., Azam, F., Umair, M., Ahmad, S., Nawab, Y., … Ullah, T. (2022). Development and characterization of impact resistant fabric with better comfort for motorbike riders. Journal of the Textile Institute. https://doi.org/10.1080/00405000.2022.2093080 Uz Zaman, S., Shahid, S., Shaker, K., Nawab, Y., Ahmad, S., Umair, M., … Azam, F. (2022). Development and characterization of chemical and fire resistant jute/unsaturated polyester composites. Journal of the Textile Institute, 113(3), 484–493. https://doi.org/10.1080/00405000.2021.1889131 Shaker, K., & Nawab, Y. (2022). Bast and Grass Fibers. In SpringerBriefs in Materials (pp. 33–44). https://doi.org/10.1007/978-3-030-97413-8_4 Siddique, A., Iqbal, Z., Nawab, Y., & Shaker, K. (2022). A review of joining techniques for thermoplastic composite materials. Journal of Thermoplastic Composite Materials. https://doi.org/10.1177/08927057221096662 Ilyas, R. A., Yusoff, M. Z. M., Alias, A. H., Rizal, M. A. M., Hassan, S. A., Zainudin, E. S., … Sari, N. H. (2022). Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications. Polymers, 14(1). https://doi.org/10.3390/polym14010202 Ahmad, A., Moeed, A., Tariq, A., Nawab, Y., Farooq, M. U., & Umair, M. (2022). Effect of Hybridization Approach on Mechanical Performance of Jute-hemp/epoxy Hybrid Composite Laminates. Journal of Natural Fibers. https://doi.org/10.1080/15440478.2022.2064398 Hamouda, T., Kafafy, H., Mashaly, H. M., & Aly, N. M. (2022). Breathability performance of antiviral cloth masks treated with silver nanoparticles for protection against COVID-19. Journal of Industrial Textiles. https://doi.org/10.1177/15280837211051100 Chakraborty, S., Moore, M., & Parrillo-Chapman, L. (2022). Automatic defect detection for fabric printing using a deep convolutional neural network. INTERNATIONAL JOURNAL OF FASHION DESIGN TECHNOLOGY AND EDUCATION, 15(2), 142–157. https://doi.org/10.1080/17543266.2021.1925355 Chakraborty, S., Saha, K., & Parillo-Chapman, L. (2022). Comparison of Digital Printed Fabrics’ Colorimetric Attributes Based on Pretreatment Methods. Breaking Boundaries. https://doi.org/10.31274/itaa.13536 Hwang, C., Lee, Y., Ghalachyan, A., & Karpova, E. (2022). Student learning about social responsibility in the global textile and apparel industry: the use of video as an instructional tool. INTERNATIONAL JOURNAL OF FASHION DESIGN TECHNOLOGY AND EDUCATION, 15(1), 67–76. https://doi.org/10.1080/17543266.2021.2004242 Johnson, O., Matthews, D., Patwary, S., & Diallo, M. D. D. (2022, December 26). Wearing Is Caring: An Investigation of the Adoption of Black Lives Matter Apparel and Accessories by Non-Blacks. CLOTHING AND TEXTILES RESEARCH JOURNAL, Vol. 12. https://doi.org/10.1177/0887302X221147828 Extraction of cellulosic fibers from date palm by-products. (2022). In Extraction of Natural Products from Agro-industrial Wastes. https://doi.org/10.1016/B978-0-12-823349-8.00009-5 Darwish, E. A., & Midani, M. (2022). The potential of date palm midribs-based fabric acoustic panels for sustainable interior design. Ain Shams Engineering Journal, 12, 102100. https://doi.org/10.1016/j.asej.2022.102100 Elseify, L. A., Midani, M., El-Badawy, A. A., Awad, S., & Jawaid, M. (2022, December 17). Comparative study of long date palm (Phoenix dactylifera L.) midrib and spadix fibers with other commercial leaf fibers. CELLULOSE, Vol. 12. https://doi.org/10.1007/s10570-022-04972-1 Ling, Y., Henson, C., West, A., & Yin, R. (2022, November 23). Systematic investigation and evaluation of modified ring yarns by feeding three-roving strands. TEXTILE RESEARCH JOURNAL. https://doi.org/10.1177/00405175221139323 Awad, S., Hamouda, T., Midani, M., Katsou, E., & Fan, M. (2022, November 17). Polylactic Acid (PLA) Reinforced with Date Palm Sheath Fiber Bio-Composites: Evaluation of Fiber Density, Geometry, and Content on the Physical and Mechanical Properties. JOURNAL OF NATURAL FIBERS, Vol. 11. https://doi.org/10.1080/15440478.2022.2143979 Wang, Z., Amanah, A. Y., Ali, K. M., Payne, L. C., Kisthardt, S., Scholle, F., … Gluck, J. M. (2022, November 2). A standardized procedure for quantitative evaluation of residual viral activity on antiviral treated textiles. TEXTILE RESEARCH JOURNAL, Vol. 11. https://doi.org/10.1177/00405175221126532 Song, Y., & Shim, E. (2022). 3D X-ray tomographic microstructure analysis of dust-clogging inside nonwoven fibrous filter media. JOURNAL OF MEMBRANE SCIENCE, 664. https://doi.org/10.1016/j.memsci.2022.121067 Cho, B., & Moore, M. (2022, September 13). The effect of technology driven mergers and acquisitions on firm performance in the US textile industry. JOURNAL OF THE TEXTILE INSTITUTE. https://doi.org/10.1080/00405000.2022.2124654 Midani, M., Elseify, L. A., Hamouda, T., & Hassanin, A. H. (2022). Comparison of coconut coir and date palm coir (sheath fiber) and their composites. In Coir Fiber and its Composites. https://doi.org/10.1016/b978-0-443-15186-6.00070-9 Chen, J.-A., Sung, H.-H., Shen, X., Tallent, N., Barker, K., & Li, A. (2022). Bit-GraphBLAS: Bit-Level Optimizations of Matrix-Centric Graph Processing on GPU. 2022 IEEE 36TH INTERNATIONAL PARALLEL AND DISTRIBUTED PROCESSING SYMPOSIUM (IPDPS 2022), pp. 515–525. https://doi.org/10.1109/IPDPS53621.2022.00056 Mondal, B. V., Kabir, S. M. F., Ali, A., & Hannan, M. A. (2022). Sustainable Natural Printing of Cotton Fabric Without Metal-Based Mordant. Journal of Natural Fibers. https://doi.org/10.1080/15440478.2022.2124215 Suh, M., & Park, J. H. (2022). Breast Geometry Characterization of Young American Females Using 3D Image Analysis. APPLIED SCIENCES-BASEL, 12(17). https://doi.org/10.3390/app12178578 Nartker, K., Annett-Hitchcock, K., & Hoque, S. M. A. (2022, August 31). Consumer perceptions and concerns regarding aesthetic attributes of textile-based assistive devices: a qualitative analysis of online retail product reviews. RESEARCH JOURNAL OF TEXTILE AND APPAREL, Vol. 8. https://doi.org/10.1108/RJTA-01-2022-0005 Luan, K., Kirkwood, E., Newman, Z., West, A., & DenHartog, E. (2022, August 1). New insight into the flexural rigidity of multi-filament yarn. TEXTILE RESEARCH JOURNAL. https://doi.org/10.1177/00405175221114655 DeBois, I. J., Agarwal, E., Kapoor, A., & Mathur, K. (2022). Tribology of the sock-skin Interface - the influence of different fabric parameters on sock friction. JOURNAL OF FOOT AND ANKLE RESEARCH, 15(1). https://doi.org/10.1186/s13047-022-00560-5 Xia, S., Li, J., Istook, C. L., & West, A. J. (2022, August 15). A 2D image body measurement system developed with neural networks and a color-coded measurement garment. INTERNATIONAL JOURNAL OF CLOTHING SCIENCE AND TECHNOLOGY, Vol. 8. https://doi.org/10.1108/IJCST-08-2021-0114 Cao, F., Wu, X., Li, M., Chen, S., Chen, B., Duan, G., … Li, G. (2022). Ni3Fe nanoparticles encapsulated by N-doped carbon derived from MOFs for oxygen evolution reaction. JOURNAL OF ALLOYS AND COMPOUNDS, 919. https://doi.org/10.1016/j.jallcom.2021.165799 Chandrasekar, M., Senthilkumar, K., Jawaid, M., Alamery, S., Fouad, H., & Midani, M. (2022, July 15). Tensile, Thermal and Physical Properties of Washightonia Trunk Fibres/Pineapple Fibre Biophenolic Hybrid Composites. JOURNAL OF POLYMERS AND THE ENVIRONMENT, Vol. 7. https://doi.org/10.1007/s10924-022-02524-z Ruan, Y., Xu, Y., & Lee, H. (2022). Consumer Motivations for Luxury Fashion Rental: A Second-Order Factor Analysis Approach. SUSTAINABILITY, 14(12). https://doi.org/10.3390/su14127475 Mukai, Y., & Suh, M. (2022, June 3). Design and characterization of a cotton fabric antenna for on-body thermotherapy. JOURNAL OF INDUSTRIAL TEXTILES, Vol. 6. https://doi.org/10.1177/15280837221107160 Lequeux, A., Maze, B., Laroche, G., & Heim, F. (2022, May 25). Non-woven textiles for medical implants: mechanical performances improvement. BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK. https://doi.org/10.1515/bmt-2022-0017 Awad, S., Ghaffar, S. H., Hamouda, T., Midani, M., Katsou, E., & Mizi. (2022). Critical evaluation of date palm sheath fibre characteristics as a reinforcement for developing sustainable cementitious composites from waste materials. Biomass Conversion and Biorefinery, 5. https://doi.org/10.1007/s13399-022-02759-9 Cave, G. L., West, A. J., McCord, M. G., Koene, B., Beck, J. B., Deguenon, J. M., … Roe, R. M. (2022). Novel 3-D Spacer Textiles to Protect Crops from Insect Infestation and That Enhance Plant Growth. AGRICULTURE-BASEL, 12(4). https://doi.org/10.3390/agriculture12040498 Ruckdashel, R., & Shim, E. (2022, April 11). Hollowness Variation with Die Wall Thickness in Melt-Spinning of Polypropylene Hollow Fibers. FIBERS AND POLYMERS, Vol. 4. https://doi.org/10.1007/s12221-022-4498-0 Li, J., Xia, S., West, A. J., & Istook, C. L. (2022, March 14). Fashionable sportswear working as a body measurement collecting tool. INTERNATIONAL JOURNAL OF CLOTHING SCIENCE AND TECHNOLOGY, Vol. 3. https://doi.org/10.1108/IJCST-07-2021-0090 Nartker, K. (2022). Crafting in COVID: Engagement With Textile Arts and Crafts Among Senior Living Residents Throughout the COVID-19 Pandemic. GERONTOLOGY AND GERIATRIC MEDICINE, 8. https://doi.org/10.1177/23337214221079164 Lee, H., Xu, Y., & Porterfield, A. (2022, February 8). Virtual Fitting Rooms for Online Apparel Shopping: An Exploration of Consumer Perceptions. FAMILY & CONSUMER SCIENCES RESEARCH JOURNAL, Vol. 2. https://doi.org/10.1111/fcsr.12428 Lee, H., & Xu, Y. (2022). Influence of motivational orientations on consumers' adoption of virtual fitting rooms (VFRs): moderating effects of fashion leadership and technology visibility. INTERNATIONAL JOURNAL OF FASHION DESIGN TECHNOLOGY AND EDUCATION, 15(3), 297–307. https://doi.org/10.1080/17543266.2022.2048423 Szoke, M., Devenport, W. J., Borgoltz, A., Alexander, W. N., Hari, N., Glegg, S. A. L., … Seyam, A.-F. M. (2022, January 31). Investigating the Aeroacoustic Properties of Porous Fabrics. AIAA JOURNAL, Vol. 1. https://doi.org/10.2514/1.J061385 Li, A., Vallabh, R., Bradford, P. D., Kim, D., & Seyam, A.-F. M. (2022, January 7). Development of hull material for high-altitude airship: A parametric study. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, Vol. 1. https://doi.org/10.1177/07316844211054852 Wei, W., Shim, E., Song, Y., & Pourdeyhimi, B. (2022, January 10). Synthesizing heat transfer factors on thermal bonding structure of mineral added polypropylene spun-bond. JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 139. https://doi.org/10.1002/app.52138 Wang, L., Xu, Y., Lee, H., & Li, A. (2022). Preferred product attributes for sustainable outdoor apparel: A conjoint analysis approach. SUSTAINABLE PRODUCTION AND CONSUMPTION, 29, 657–671. https://doi.org/10.1016/j.spc.2021.11.011 Kim, G., Jin, B., & Shin, D. C. (2022). Virtual reality as a promotion tool for small independent stores. JOURNAL OF RETAILING AND CONSUMER SERVICES, 64. https://doi.org/10.1016/j.jretconser.2021.102822 Jin, B. E., & Kim, G. (2022). Assessing Malaysia and Indonesia as emerging retail markets: an institution-based view. International Journal of Retail & Distribution Management, 11. https://doi.org/10.1108/IJRDM-05-2020-0187 Lee, H., Xu, Y., & Porterfield, A. (2022). Antecedents and moderators of consumer adoption toward AR‐enhanced virtual try‐on technology: A stimulus‐organism‐response approach. International Journal of Consumer Studies, 11. https://doi.org/10.1111/ijcs.12760 Wang, Y., Shim, E., He, N., Pourdeyhimi, B., & Gao, W. (2022). Modeling the Triboelectric Behaviors of Elastomeric Nonwoven Fabrics. Advanced Materials, 11, 2106429. https://doi.org/10.1002/adma.202106429 Ding, Y., Szymczyk, M., Mehraban, N., Lim, J., Parrillo-Chapman, L., El-Shafei, A., & Freeman, H. S. (2022). Molecular and excited state properties of photostable anthraquinone red and violet dyes for hydrophobic fibers. JOURNAL OF MOLECULAR STRUCTURE, 1248. https://doi.org/10.1016/j.molstruc.2021.131349 Kabir, S. M. F., & Haque, S. (2022). A Mini Review on the Innovations in Sizing of Cotton. Journal of Natural Fibers. https://doi.org/10.1080/15440478.2021.1941486 Li, J., & Leonas, K. K. (2022). Sustainability topic trends in the textile and apparel industry: a text mining-based magazine article analysis. JOURNAL OF FASHION MARKETING AND MANAGEMENT, 26(1), 67–87. https://doi.org/10.1108/JFMM-07-2020-0139 Mathur, K., Kabir, S. M. F., & Seyam, A.-F. M. (2022). Tensile properties of 3D printed continuous fiberglass reinforced cellular composites. The Journal of The Textile Institute, 12, 1–10. https://doi.org/10.1080/00405000.2020.1863567