Displaying works 1 - 20 of 116 in total
Sorted by most recent date added to the index first, which may not be the same as publication date order.
2017 journal article
Hybrid composites from coir fibers reinforced with woven glass fabrics: Physical and mechanical evaluation
Polymer Composites.
2017 journal article
Fabrication of PAN-TCF-hydrazone nanofibers by solution blowing spinning technique: Naked-eye colorimetric sensor
Journal of Environmental Chemical Engineering.
2017 journal article
Complex three- dimensional-shaped knitting preforms for composite application
Journal of Industrial Textiles.
2017 journal article
Biological Performance of Novel Hybrid Green Composites Produced from Glass Fibers and Jute Fabric Skin by the VARTM Process
BioResources.
2017 journal article
Simultaneous Optimization of Woven Fabric Properties Using Principal Component Analysis
Journal of Natural Fibers, 14(6), 846–857.
Contributors: M. Umair *, K. Shaker *, N. Ahmad *, M. Hussain *, M. Jabbar * & Y. Nawab
2017 journal article
Optimizing the performance of woven protective gloves using grey relational analysis
Journal of the Textile Institute, 108(10), 1715–1719.
Contributors: M. Jabbar *, K. Shaker *, M. Umair * & Y. Nawab*
2017 journal article
Multi-response optimization of mechanical and comfort properties of bi-stretch woven fabrics using grey relational analysis in Taguchi method
Journal of the Textile Institute, 108(5), 794–802.
Contributors: M. Maqsood*, T. Hussain *, N. Ahmad * & Y. Nawab*
2017 journal article
Investigation of multi-layered woven car seatbelts with optimum performance
Industria Textila, 68(2), 77–82. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020037207&partnerID=MN8TOARS
Contributors: A. Zulifqar, K. Shaker, Y. Nawab , M. Umair, D. Baitab & M. Maqsood
2017 journal article
The development of novel auxetic woven structure for impact applications
Journal of the Textile Institute, 108(7), 1264–1270.
Contributors: M. Liaqat*, H. Samad*, S. Hamdani * & Y. Nawab*
2017 journal article
Study of dynamic compressive behaviour of aramid and ultrahigh molecular weight polyethylene composites using Split Hopkinson Pressure Bar
Journal of Composite Materials, 51(1), 81–94.
Contributors: K. Shaker *, A. Jabbar *, M. Karahan *, N. Karahan * & Y. Nawab*
2017 journal article
Simulation of air bubble’s creation, compression, and transport phenomena in resin transfer moulding
Journal of Composite Materials, 51(29), 4115–4127.
Contributors: B. Aaboud*, A. Saouab * & Y. Nawab*
2017 journal article
Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials
Journal of the Textile Institute, 108(1), 84–88.
Contributors: M. Maqsood*, M. Khan *, K. Shaker *, M. Umair * & Y. Nawab
2017 journal article
Preparation of conductive polyethylene terephthalate yarns by deposition of silver & copper nanoparticles
Fibres and Textiles in Eastern Europe, 25(5), 25–30.
Contributors: S. Ahmad *, M. Ashraf *, A. Ali *, K. Shaker *, M. Umair *, A. Afzal *, Y. Nawab , A. Rasheed *
2017 journal article
Investigation of multi-layered woven car seatbelts with optimum performance
Industria Textila. https://publons.com/wos-op/publon/990646/
Contributors: A. Zulifqar, K. Shaker, Y. Nawab , M. Umair, D. Baitab & M. Maqsood
2017 journal article
Investigation of mechanical behavior of woven/knitted hybrid composites
Journal of the Textile Institute, 108(9), 1510–1517.
Contributors: W. Ashraf*, Y. Nawab* , M. Umair, K. Shaker * & M. Karahan *
2017 journal article
Investigating the mechanical behavior of composites made from textile industry waste
Journal of the Textile Institute, 108(5), 835–839.
Contributors: M. Umar *, K. Shaker *, S. Ahmad *, Y. Nawab* & M. Maqsood*
2017 journal article
Investigating the effect of material and weave design on comfort properties of bilayer-woven fabrics
Journal of the Textile Institute, 108(8), 1319–1326.
Contributors: M. Nazir *, K. Shaker *, Y. Nawab* , M. Fazal*, M. Khan * & M. Umair
2017 journal article
Interdependence of moisture, mechanical properties, and hydrophobic treatment of jute fibre-reinforced composite materials
Journal of the Textile Institute, 108(10), 1768–1776.
Contributors: M. Ameer*, K. Shaker *, M. Ashraf *, M. Karahan *, Y. Nawab* , S. Ahmad *, M. Nasir *
2017 journal article
CHARACTERIZATION AND STATISTICAL MODELLING OF THERMAL RESISTANCE OF COTTON/POLYESTER BLENDED DOUBLE LAYER INTERLOCK KNITTED FABRICS
Thermal Science, 21(6), 2393–2403.
Contributors: A. Afzal *, S. Ahmad *, A. Rasheed *, M. Mohsin, F. Ahmad * & Y. Nawab*
2017 journal article
INFLUENCE OF FABRIC PARAMETERS ON THERMAL COMFORT PERFORMANCE OF DOUBLE LAYER KNITTED INTERLOCK FABRICS
Autex Research Journal, 17(1), 20–26.
Contributors: A. Afzal *, S. Ahmad *, A. Rasheed *, F. Ahmad *, F. Iftikhar * & Y. Nawab*
Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.
Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.