Forest Biomaterials - 2000

Peszlen, I., Szojakné Török, K., Nemeth, R., & Paukó, A. (2000). Wood properties in Picea abies clones. Forest Products Society 54th Annual Meeting. Technical Forum presented at the Forest Products Society 54th Annual Meeting, South Lake Tahoe, Nevada, USA.

Peszlen, I., Marosvölgyi, B., & Tamás, R. (2000). Wood quality and utilization perspectives of selected poplar clones for biomass energy in Hungary. 21st Session of the International Poplar Commission (IPC 2000). Presented at the 21st Session of the International Poplar Commission (IPC 2000), Portland, Oregon, USA.

Peszlen, I., Rédei, K., & Molnár, S. (2000). Distribution and Importance of black locust in Hungary. Technology for High Quality Products from Black Locust Conference. Presented at the Technology for High Quality Products from Black Locust Conference, Bugac, Hungary.

Peszlen, I., & Molnár, S. (2000). Wood structure and properties that affect production from black locust. Technology for High Quality Products from Black Locust Conference. Presented at the Technology for High Quality Products from Black Locust Conference, Bugac, Hungary.

Peszlen, I., Varga, F., & Molnár, S. (2000). Resistance of untreated and steamed black locust to fungal decay. Technology for High Quality Products from Black Locust Conference. Presented at the Technology for High Quality Products from Black Locust Conference, Bugac, Hungary.

Peszlen, I. (2000). Wood Structure and Properties - The living tree. In S. Molnár (Ed.), Faipari Kézikönyv (Wood Handbook) (pp. 29–32). Sopron: Faipari Tudományos Alapítvány.

Peszlen, I. (2000). Cell wall. In S. Molnár (Ed.), Faipari Kézikönyv (Wood Handbook) (pp. 37–40). Sopron: Faipari Tudományos Alapítvány.

Peszlen, I. (2000). Microscopic structure. In S. Molnár (Ed.), Faipari Kézikönyv (Wood Handbook) (pp. 40–46). Sopron: Faipari Tudományos Alapítvány.

Peszlen, I. (2000). Macroscopic characteristics. In S. Molnár (Ed.), Faipari Kézikönyv (Wood Handbook) (pp. 46–50). Sopron: Faipari Tudományos Alapítvány.

Peszlen, I. (2000). Bark. In S. Molnár (Ed.), Faipari Kézikönyv (Wood Handbook (pp. 50–51). Sopron: Faipari Tudományos Alapítvány.

Marosvölgyi, B., Peszlen, I., & Tamás, R. (2000). Wood for Energy and its Impact on the Environment. Forest Products Society 54th Annual Meeting. Presented at the Forest Products Society 54th Annual Meeting, South Lake Tahoe, Nevada, USA.

Jager, M. J., McClintic, D. P., & Tilotta, D. C. (2000). Measurement of Petroleum Fuel Contamination in Water by Solid-Phase Microextraction with Direct Raman Spectroscopic Detection. Applied Spectroscopy, 54(11), 1617–1623. https://doi.org/10.1366/0003702001948637

Welf, E., & Venditti, R. A. (2000). The Effect of Surfactant Structure on Toner Agglomeration. The Ninth Annual North Carolina State University Undergraduate Research Symposium, Book of Abstracts, 81. Raleigh, North Carolina: North Carolina State University.

Lucas, B., Venditti, R. A., & Jameel, H. (2000). The Breakage of Adhesive Contaminants in Pulp Suspensions. 2000 TAPPI Pulping/Process & Product Quality Conference : Sheraton Boston, Boston, MA USA, November 5-8, 2000. Presented at the 2000 TAPPI Pulping/Process & Product Quality Conference, Boston, MA.

Venditti, R. A., Zhang, C., Gilbert, R. D., & Abubakr, S. (2000). The effect of release liner materials on adhesive contaminants, paper recycling and recycled paper properties. Proceedings of the TAPPI Paper Recycling Conference, 579–592. Atlanta, Georgia: TAPPI Press.

Chang, H. M., Venditti, R. A., & Hietmann, J. A. (2000, April 25). Agglomeration Deinking. Presented at the International Symposium on Environmentally Friendly and Emerging Technologies for a Sustainable Pulp and Paper Industry, Taiwan.

Huo, X., Venditti, R. A., & Chang, H. M. (2000). Effect of Salts and Cationic Polymers on the Stability of Micro-Adhesive Particles. International Symposium on Environmentally Friendly and Emerging Technologies for a Sustainable Pulp and Paper Industry. Presented at the International Symposium on Environmentally Friendly and Emerging Technologies for a Sustainable Pulp and Paper Industry, Tappi, Taipai, Taiwan.

Kadla, J. F., Venditti, R. A., & Gilbert, R. D. (2000). Melt Spun Fibers of Lignin/Synthetic Polymer Blends. American Chemical Society, Pan-Pacific Regional Meeting. Presented at the American Chemical Society, Pan-Pacific Regional Meeting, Hawaii.

Shaffer, J. T., Leitten, C. F., Griffith, W. L., Compere, A. L., Gilbert, R. D., & Venditti, R. A. (2000). Low Cost Carbon Fiber from Renewable Resources. SAMPE-DOE Midwest Advanced Materials and Processing Conference. Presented at the SAMPE-DOE Midwest Advanced Materials and Processing Conference, Dearborn, Michigan.

Lee, S. Y., Lee, H. L., & Park, S. (2000). Evaluation of the nip pressure profile and analysis of heat transfer in soft nip calender. Journal of Korea Technical Association of the Pulp and Paper Industry, 32(2), 85–88.

George, B., Hudson, S., & McCord, M. G. (2000). Production and Characterization of Mineral Filled Polypropylene Filaments. Proceedings of ASME Fall Congress 2000, Textile Engineering Division Session.

McCord, M. G. (2000). Testing of biological barrier fabrics. Second international conference on safety & protective fabrics: a technical focus on textile and material development for personal protection. Roseville (MN) : Industrial Fabrics Association International.

Shalev, I., Barker, R. L., McCord, M., Tucker, P. A., & Lisk, B. R. (2000). Protective textile particle penetration. In R. L. Barker & G. C. Coletta (Eds.), Performance of protective clothing :  issues and priorities for the 21st century (Vol. 7). https://doi.org/10.1520/stp14442s

McCord, M., Rajagopalan, K. L., & Barker, R. L. (2000). The relationship between porosity and barrier effectiveness of some shell fabrics used in protective apparel. In C.N. Nelson & N. W. Henry (Eds.), Performance of protective clothing: issues and priorities for the 21st century. Seventh volume (Vol. 7). https://doi.org/10.1520/stp14453s

Barker, R. L., McCord, M., & Deaton, A. S. (2000). Liquid penetration pressures for fabrics tested in compression. In C.N. Nelson & N. W. Henry (Eds.), Performance of protective clothing: issues and priorities for the 21st century. Seventh volume. https://doi.org/10.1520/stp14462s

McCord, M. G., Deaton, A. S., & Barker, R. L. (2000). Effects of fabric compression on the results of liquid penetration testing. In C.N. Nelson & N. W. Henry (Eds.), Performance of protective clothing: issues and priorities for the 21st century. Seventh volume (Vol. 7). West Conshohocken, PA: ASTM.

Barker, R. L., McCord, M., Brown, J. Z., & Deaton, A. S. (2000). Comfort and barrier effectiveness of microporous films and laminates. In C.N. Nelson & N. W. Henry (Eds.), Performance of protective clothing: issues and priorities for the 21st century. Seventh volume. https://doi.org/10.1520/stp14437s

George, B., Hudson, S. M., & McCord, M. (2000). Surface features of mineral filled polypropylene filaments. In C. M. Pastore & P. Kiekens (Eds.), Surface characteristics of fibers and textiles (pp. 139–160). New York: M. Dekker.

Alma, M. H., Kelley, S. S., & Bektas, I. (2000). The tensile properties of molding products obtained by the condensation of various tree barks and phenol by using sulfuric acid as a catalyst. JOURNAL OF MATERIALS SCIENCE LETTERS, 19(17), 1517–1520. https://doi.org/10.1023/A:1006704501712

Fadeev, A. G., Meagher, M. M., Kelley, S. S., & Volkov, VV. (2000). Fouling of poly[-1-(trimethylsilyl)-1-propyne] membranes in pervaporative recovery of butanol from aqueous solutions and ABE fermentation broth. JOURNAL OF MEMBRANE SCIENCE, 173(1), 133–144. https://doi.org/10.1016/S0376-7388(00)00359-8

Reinsch, V. E., Greenberg, A. G., & Kelley, S. (2000). A new technique for the simultaneous, real-time measurement of membrane compaction and performance during exposure to high-pressure gas. Journal of Membrane Science, 171(2), 217–228. https://doi.org/10.1016/S0376-7388(00)00307-0

Ahvazi, B., & Argyropoulos, D. (2000). Proton spin-lattice relaxation time measurements of solid wood and its constituents as a function of pH, Part I. Wood Science and Technology, 34, 45–53. https://doi.org/10.1007/s002260050007

Argyropoulos, D., Halevy, P., & Peng, P. (2000). Photoyellowing inhibition of bleached high yield pulps using novel water-soluble UV screens. Photochemistry and Photobiology, 7(2), 141–148. https://doi.org/10.1562/0031-8655(2000)0710141piobhy2.0.co2

Alma, M. H., & Kelley, S. (2000). The thermal stability of novolac-type thermosets made by the condensation of bark and phenol. Polymer Degradation and Stability, 68, 413. https://doi.org/10.1016/s0141-3910(00)00029-x

Denig, J., Wengert, E. M., & Simpson, W. T. (2000). Drying Hardwood Lumber. General Technical Report - Forest Products Laboratory, USDA Forest Service, (-).

Zhang, M., Hubbe, M. A., Venditti, R. A., & Heitmann, J. A. (2000). Loss of Bonding Strength Due to Drying and Repulping of Kraft Fibers: Effects of Chemical Additives. In Y.-C. Su & E. I. C. WangEditors (Eds.), Proceedings of International Symposium on Environmentally Friendly and Emerging Technologies for a Sustainable Pulp and Paper Industry (pp. 61–67). Taipei, Taiwan: Taiwan Forestry Research Institute; Taiwan Technical Association of Pulp and Paper Industry.

Alves, V. L., Drumond, M. G., Stefani, G. M., Chen, C. L., & Pilo-Veloso, D. (2000). Synthesis of new trimeric lignin model compounds containing 5-5 ' and beta-O-4 ' substructures, and their characterization by 1D and 2D NMR techniques. Journal of the Brazilian Chemical Society, 11(5), 467–473.

Lemaster, R. L., Lu, L. Y., & Jackson, S. (2000). The use of process monitoring techniques on a CNC wood router. Part 1. Sensor selection. Forest Products Journal, 50(7-8), 31–38.

Hubbe, M. A. (2000). Reversibility of polymer-induced fiber flocculation by shear. 1. Experimental methods. NORDIC PULP & PAPER RESEARCH JOURNAL, Vol. 15, pp. 545–553. https://doi.org/10.3183/npprj-2000-15-05-p545-553

Cui, Y., Puthson, P., Chen, C. L., Gratzl, J. S., & Kirkman, A. G. (2000). Kinetic study on delignification of kraft-AQ pine pulp with hydrogen peroxide catalyzed by Mn(IV)-Me4DTNE. HOLZFORSCHUNG, 54(4), 413–419. https://doi.org/10.1515/HF.2000.069

Wang, F., Tanaka, H., Kitaoka, T., & Hubbe, M. A. (2000). Distribution characteristics of rosin size and their effect on the internal sizing of paper. Nordic Pulp & Paper Research Journal, 15(5), 416–421. https://doi.org/10.3183/npprj-2000-15-05-p416-421

Baas, P., Wheeler, E., & Chase, M. (2000). Dicotyledonous wood anatomy and the APG system of angiosperm classification. BOTANICAL JOURNAL OF THE LINNEAN SOCIETY, Vol. 134, pp. 3–17. https://doi.org/10.1111/j.1095-8339.2000.tb02343.x

Balakskin, M., Chen, C. L., Gratzl, J. S., Kirkman, A. G., & Jakob, H. (2000). Biobleaching of pulp with dioxygen in the laccase-mediator system. Part 1. Kinetics of delignification. HOLZFORSCHUNG, 54(4), 390–396. https://doi.org/10.1515/HF.2000.066

Lemaster, R. L., Lu, L. Y., & Jackson, S. (2000). The use of process monitoring techniques on a CNC wood router. Part 2. Use of a vibration accelerometer to monitor tool wear and workpiece quality. Forest Products Journal, 50(9), 59–64.

Shiba, T., Xiao, L., Miyakoshi, T., & Chen, C. L. (2000). Oxidation of isoeugenol and coniferyl alcohol catalyzed by laccases isolated from Rhus vernicifera Stokes and Pycnoporus coccineus. JOURNAL OF MOLECULAR CATALYSIS B-ENZYMATIC, 10(6), 605–615. https://doi.org/10.1016/S1381-1177(00)00184-3

Chen, C. L., Potthast, A., Rosenau, T., Gratzl, J. S., Kirkman, A. G., Nagai, D., & Miyakoshi, T. (2000). Laccase-catalyzed oxidation of 1-(3,4-dimethoxyphenyl)-1-propene using ABTS as mediator. JOURNAL OF MOLECULAR CATALYSIS B-ENZYMATIC, 8(4-6), 213–219. https://doi.org/10.1016/S1381-1177(99)00059-4

Baas, P., & Wheeler, E. A. (2000). Wood structure of Southeast-Asian timbers: the PROSEA woods reviewed. In New horizons in wood anatomy (pp. 1–9). Korea: Chonnam National University Press.

Qiu, Y. P., Batchelor, S. D., Jack, P. R., & McCord, M. G. (2000). Estimation of the axial tensile modulus of a particle-reinforced composite fiber with variable radius. COMPOSITES SCIENCE AND TECHNOLOGY, 60(14), 2731–2737. https://doi.org/10.1016/S0266-3538(00)00145-7

Jacobs-Young, C. J., Gustafson, R. R., & Heitmann, J. A. (2000). Conventional kraft pulping using enzyme pretreatment technology: role of diffusivity in enhancing pulp uniformity. Paperi Ja Puu = Paper and Timber, 82(2), 114–119.

Gratzl, J. S., & Chen, C. L. (2000). Chemistry of pulping: Lignin reactions. Lignin: Historical, Biological, and Materials Perspectives, 742, 392–421.

Buehlmann, U., Ragsdale, C. T., & Gfeller, B. (2000). A spreadsheet-based decision support system for wood panel manufacturing. DECISION SUPPORT SYSTEMS, 29(3), 207–227. https://doi.org/10.1016/S0167-9236(00)00072-5

Balakshin, M. Y., Chen, C. L., Gratzl, J. S., Kirkman, A. G., & Jakob, H. (2000). Kinetic studies on oxidation of veratryl alcohol by laccase-mediator system. Part 2. The kinetics of dioxygen uptake. HOLZFORSCHUNG, 54(2), 171–175. https://doi.org/10.1515/HF.2000.029

Balakshin, M. Y., Chen, C. L., Gratzl, J. S., Kirkman, A. G., & Jakob, H. (2000). Kinetic studies on oxidation of veratryl alcohol by laccase-mediator system - Part 1. Effects of mediator concentration. HOLZFORSCHUNG, 54(2), 165–170. https://doi.org/10.1515/HF.2000.028

Gilbert, R. D., Venditti, R., Zhang, C. S., & Koelling, K. W. (2000). Melt spinning of thermotropic cellulose derivatives. Journal of Applied Polymer Science, 77(2), 418–423. https://doi.org/10.1002/(SICI)1097-4628(20000711)77:2<418::AID-APP19>3.3.CO;2-9

Potthast, A., Rosenau, T., Kosma, P., Chen, C. L., & Gratzl, J. S. (2000). Confirmation of the presence of formaldehyde and N-(methylene)morpholinium cations as reactive species in the cellulose/NMMO/water system by trapping reactions. HOLZFORSCHUNG, 54(1), 101–103. https://doi.org/10.1515/HF.2000.016

Kadla, J. F., & Gilbert, R. D. (2000). Cellulose structure: A review. Cellulose Chemistry and Technology, 34(3-4), 197–216.

Wheeler, E. A., & Lehman, T. M. (2000). Late Cretaceous woody dicots from the Aguja and Javelina Formations, Big Bend National Park, Texas, USA. IAWA JOURNAL, 21(1), 83–120. https://doi.org/10.1163/22941932-90000239

Kaya, F., Heitmann, J. A., & Joyce, T. W. (2000). Influence of lignin and its degradation products on enzymatic hydrolysis of xylan. JOURNAL OF BIOTECHNOLOGY, 80(3), 241–247. https://doi.org/10.1016/S0168-1656(00)00265-0

Peralta, P. N., & Bangi, A. P. (2000). Grid-based tactile sensor system for shrinkage pressure measurement. Wood and Fiber Science, 32(1), 52–60.