Forest Biomaterials - 2002

Venditti, R. A., Lucas, B. E., & Jameel, H. (2002). Adhesive Contaminants and Screening Operations: Advanced Recycling Short Course. TAPPI.

Molnar, S., Peszlen, I., Nemeth, R., Feher, S., & Varga, M. (2002). Modeling the Wood Chain for Red Heart Beech. Technical Forum Presentation, Forest Products Society, 56th Annual Meeting. Presented at the Technical Forum Presentation, Forest Products Society, 56th Annual Meeting, Madison, Wisconsin, USA.

Molnar, S., Varga, M., Peszlen, I., & Feher, S. (2002). Investigation of Respirable Range of Hardwood Dust. Technical Forum Presentation, Forest Products Society 56th Annual Meeting. Presented at the Technical Forum Presentation, Forest Products Society 56th Annual Meeting, Madison, Wisconsin, USA.

Peszlen, I., & Paukó, A. (2002). Development and properties of reaction wood - Compression wood II. Magyar Asztalos És Faipar, 12, 152–153.

Peszlen, I., & Pauko, A. (2002). Development and properties of reaction wood - Tension wood. Magyar Asztalos És Faipar, 2002(1), 140–143.

Saloni, D., Carrano, A., & Lemaster, R. (2002). Traditional versus engineered abrasives on material removal and surface quality. Presented at the Industrial Engineering Research Conference, Orlando, FL.

Venditti, R. A., Lucas, B. E., & Jameel, H. (2002). Adhesive Contaminants and Screening Operations: Advanced Recycling Short Course. Peachtree Corners, GA: TAPPI.

Kadla, J. F., Kubo, S., Gilbert, R. D., & Venditti, R. A. (2002). Lignin-based Carbon Fibers. In T. Q. Hu (Ed.), Chemical Modification, Properties, and Usage of Lignin (pp. 121–137). https://doi.org/10.1007/978-1-4615-0643-0_7

Braun, J., Kadia, J. F., Venditti, R. A., & Gilbert, R. D. (2002). Oxidative stabilization of Kraft lignin: Effect of temperature on Tg and lignin structure. Abstracts of papers, 223rd ACS national meeting : Orlando, FL, April 7-11, 2002. Presented at the 223rd ACS National Meeting, Orlando, FL, United States.

Byrd, M., Pawlak, J., Jameel, H., Venditti, R. A., Chang, H. M., & Park, S. (2002). The Effect of Operating Variables on the Fractionating Characteristics of a Hydrocyclone. TAPPI Pulping Conference Proceedings, 1398–1413. Atlanta, Georgia: TAPPI Press.

Huo, X., Venditti, R. A., & Chang, H. M. (2002). The Adsorption of Starches on Pressure-sensitive Adhesive Material and Its Impact on Agglomeration. TAPPI Pulping Conference. Presented at the Tappi Pulping Conference, San Diego CA.

Lucas, B., Venditti, R. A., & Jameel, H. (2002). Extrusion of Pressure Sensitive Adhesives through a Single Slot. TAPPI Pulping Conference. Presented at the Tappi Pulping Conference, San Diego CA.

Huo, X., Venditti, R. A., & Chang, H. M. (2002). Interactions of Adhesive Contaminants (Stickies) with Papermaking Additives in Paper Recycling. In Y.-C. Su & E. I. C. Wang (Eds.), 2002 Pan Pacific Conference of the Technical Associations of the Pulp and Paper Industry : recycling and cleaner production in the paper industry : proceedings (pp. 103–111). Taipei, Taiwan: Taiwan Forestry Research Institute.

Bastidas, J., Kadla, J. F., & Venditti, R. A. (2002). AFM Measurements on Cellulose Fibers after Drying. American Chemical Society Meeting, Division of Cellulose and Renewable Materials. Presented at the American Chemical Society Meeting, Division of Cellulose and Renewable Materials.

Venditti, R. A., Lucas, B. E., Huo, X., Jameel, H., & Chang, H. M. (2002). Paper Recycling Factors Affecting the Screening of Pressure Sensitive Adhesives. In M. R. Doshi & J. Dyer (Eds.), Recent Advances in Paper Recycling–Stickies. Appleton, WI: Doshi & Associates.

Flanagan, J., Venditti, R. A., Jameel, H., Wilson, N., Weaver, N., & Lucas, B. (2002). Passage of pressure sensitive adhesives through a slot. Progress in Paper Recycling, 11(3), 17–23.

Venditti, R. A., Chang, H. M., & Copeland, K. L. (2002). Evaluation of Various Adhesive Contaminant (Stickies) Analysis Methods for the Use in Old Corrugated Container Recycling Plants. Progress in Paper Recycling, 11(2), 38–46.

Wheeler, E. A., & Manchester, S. R. (2002). Woods of the Middle Eocene nut beds flora, Clarno Formation, Oregon, USA. In (IAWA Journal, Supplement, 3). Leiden: Nationaal Herbarium Nederland.

McCord, M. G., Hwang, Y. J., & Qiu, Y. (2002). Atmospheric pressure plasma modification of textile surfaces: Nylon 66, polypropylene, and ultra high modulus polyethylene. 2nd AUTEX Conference: Textile engineering at the dawn of a new millenium: an exciting challenge, Crowne Plaza Hotel, Bruges, Belgium, 1-3 July 2002.

Singh, J., Ragauskas, A. R., & Lucia, L. A. (2002). Green liquor chip pretreatment as a feasible method for the enhancement of softwood pulp chemical properties. Cellulose Chemistry and Technology, 1/2, 173–181.

Chen, S.-L., & Lucia, L. A. (2002). Fundamental insight into the mechanism of oxygen delignification of Kraft pulps: Influence of a novel carbohydrate protective system. Cellulose Chemistry and Technology, 36, 339–351.

Chen, S.-L., & Lucia, L. A. (2002). Fundamental insight into the mechanism of oxygen delignification of Kraft pulps. Part II. Application of surfactants. Cellulose Chemistry and Technology, 36, 495–505.

Lucia, L. A., Ragauskas, A. J., & Chakar, F. S. (2002). Comparative evaluation of oxygen delignification processes for low- and high-lignin-content softwood kraft pulps. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 41(21), 5171–5180. https://doi.org/10.1021/ie011026h

Meglen, R. R., & Kelley, S. S. (2002). Use of a region of the visible and near infrared spectrum to predict mechanical properties of wet wood and standing trees. Geneva: World Intellectual Property Organization (WIPO).

Kelley, S. S., Davis, M. F., & Looker, M. J. (2002). Rapid analysis tools for measuring the chemical composition of biomass. Proceedings of The Sixth Pacific Rim Bio-Based Composites Symposium.

Rials, T. G., Kelley, S. S., & So, C.-L. (2002). Use of advanced spectroscopic techniques for predicting the mechanical properties of wood composites. Wood and Fiber Science, 34(3), 398–407.

Kelley, S. S., Jellison, J., & Goodell, B. (2002). Use of NIR and pyrolysis-MBMS coupled with multivariate analysis for detecting the chemical changes associated with brown-rot biodegradation of spruce wood. FEMS MICROBIOLOGY LETTERS, 209(1), 107–111. https://doi.org/10.1111/j.1574-6968.2002.tb11117.x

So, C.-L., Groom, L. H., Rials, T. G., Snell, R., Kelley, S. S., & Meglen, R. R. (2002). Rapid assessment of the fundamental property variation of wood. Proceedings of the 11th Biennial Southern Silvicultural Research Conference, 11, 176–180. Ashville, NC: USDA Forest Serivice Southern Research Station.

Rials, T. G., Kelley, S. S., Groom, L. H. S., R., & So, C.-L. (2002). Rapid assessment of softwood properties with near infrared spectroscopy. Proceedings of The Sixth Pacific Rim Bio-Based Composites Symposium.

Kelley, S. S., Filley, J., Greenberg, A. R., Peterson, R., & Krantz, W. B. (2002). Chemical modification of cellulose acetate with titanium isopropoxide. INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION, 7(1-2), 162–180. https://doi.org/10.1080/10236660214595

McCord, M., Hwang, Y. J., Qiu, Y., Canup, L. K., & Bourham, M. A. (2002). Surface analysis of cotton fabrics fluorinated in atmospheric plasma. Journal of Applied Polymer Science, 86.

Chiang, V. L., Tsai, C.-J., & Hu, W.-J. (2002). Methods of modifying lignin in plants by transformation with a 4-coumarate coenzyme a ligase nucleic acid. Washington, DC: U.S. Patent and Trademark Office.

Alma, M. H., & Kelley, S. (2002). The application of pyrolysis molecular beam mass spectrometry for characterization of bark phenolysis products. Biomass and Bioenergy, 22, 411–419. https://doi.org/10.1016/s0961-9534(02)00018-1

Harding, S. A., Leshkevich, J., Chiang, V. L., & Tsai, C. J. (2002). Differential substrate inhibition couples kinetically distinct 4-coumarate: Coenzyme A ligases with spatially distinct metabolic roles in quaking aspen. Plant Physiology, 128(2002), 428–438. https://doi.org/10.1104/pp.010603

Dimmel, D. R., MacKay, J. J., Courchene, C. E., Kadla, J. F., Scott, J. T., DM O'Malley, & McKeand, S. E. (2002). Pulping and bleaching of partially CAD-deficient wood. JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY, 22(4), 235–248. https://doi.org/10.1081/WCT-120016260

Cai, Z. S., Hwang, Y. J., Park, Y. C., Zhang, C. Y., McCord, M., & Qiu, Y. P. (2002). Preliminary investigation of atmospheric pressure plasma-aided desizing for cotton fabrics. AATCC Review, 2(12), 18–21.

Raghuveer, M. S., Yoganand, S. N., Jagannadham, K., Lemaster, R. L., & Bailey, J. (2002). Improved CVD diamond coatings on WC-Co tool substrates. WEAR, 253(11-12), 1194–1206. https://doi.org/10.1016/S0043-1648(02)00244-2

Svenson, D. R., Kadla, J. F., Chang, H. M., & Jameel, H. (2002). Effect of pH on the inorganic species involved in a chlorine dioxide reaction system. Industrial & Engineering Chemistry Research, 41(24), 5927–5933. https://doi.org/10.1021/ie020191

Yokoyama, T., Matsumoto, Y., & Meshitsuka, G. (2002). Enhancement of the reaction between pulp components and hydroxyl radical produced by the decomposition of hydrogen peroxide under alkaline conditions. JOURNAL OF WOOD SCIENCE, Vol. 48, pp. 191–196. https://doi.org/10.1007/BF00771366

Svenson, D., Kadla, J. F., Chang, H. M., & Jameel, H. (2002). Effect of pH on the mechanism of OClO center dot oxidation of aromatic compounds. CANADIAN JOURNAL OF CHEMISTRY-REVUE CANADIENNE DE CHIMIE, 80(7), 761–766. https://doi.org/10.1139/V02-089

Stauffer, T. C., Venditti, R. A., Gilbert, R. D., & Kadla, J. F. (2002). Removing paraffin-based wax coatings from old corrugated containers using supercritical carbon dioxide. Journal of Applied Polymer Science, 83(12), 2699–2704. https://doi.org/10.1002/app.10248

Kadla, J. F., Kubo, S., Venditti, R. A., & Gilbert, R. D. (2002). Novel hollow core fibers prepared from lignin polypropylene blends. JOURNAL OF APPLIED POLYMER SCIENCE, 85(6), 1353–1355. https://doi.org/10.1002/app.10640

Qiu, Y., Hwang, Y. J., Zhang, C., Bures, B. L., & McCord, M. (2002). Atmospheric pressure helium plus oxygen plasma treatment of ultrahigh modulus polyethylene fibers. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 16(4), 449–457. https://doi.org/10.1163/156856102760067217

Ikeda, T., Holtman, K., Kadla, J. F., Chang, H. M., & Jameel, H. (2002). Studies on the effect of ball milling on lignin structure using a modified DFRC method. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, 50(1), 129–135. https://doi.org/10.1021/jf010870f

Zhang, M., Hubbe, M. A., Venditti, R. A., & Heitmann, J. A. (2002). Can recycled kraft fibres benefit from chemical addition before they are first dried? Appita Journal, 55(2), 135–144.

Capanema, E. A., Balakshin, M. Y., Chen, C. L., Gratzl, J. S., & Kirkman, A. G. (2002). Oxidative ammonolysis of technical lignins - Part 3. Effect of temperature on the reaction rate. HOLZFORSCHUNG, 56(4), 402–415. https://doi.org/10.1515/HF.2002.063

McCord, M. G., Hwang, Y. J., Hauser, P. J., Qiu, Y., Cuomo, J. J., Hankins, O. E., … Canup, L. K. (2002). Modifying nylon and polypropylene fabrics with atmospheric pressure plasmas. TEXTILE RESEARCH JOURNAL, 72(6), 491–498. https://doi.org/10.1177/004051750207200605

Mitchell, P. H., & Lemaster, R. L. (2002). Investigation of machine parameters on the surface quality in routing soft maple. Forest Products Journal, 52(6), 85–90.

Thomas, E. R., & Buehlmann, U. (2002). Validation of the ROMI-RIP rough mill simulator. Forest Products Journal, 52(2), 23–29.

Qiu, Y., Zhang, C., Hwang, Y. J., Bures, B. L., & McCord, M. (2002). The effect of atmospheric pressure helium plasma treatment on the surface and mechanical properties of ultrahigh-modulus polyethylene fibers. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 16(1), 99–107. https://doi.org/10.1163/15685610252771185

Kadla, J. F., & Chang, H. M. (2002). Reactions of lignin with cyanamide activated hydrogen peroxide Part 3. The degradation of pine kraft lignin. HOLZFORSCHUNG, 56(1), 76–84. https://doi.org/10.1515/HF.2002.013

Yokoyama, T., Kadla, J. F., & Chang, H. M. (2002). Microanalytical method for the characterization of fiber components and morphology of woody plants. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, 50(5), 1040–1044. https://doi.org/10.1021/jf011173q

Yang, R., Lucia, L., Ragauskas, A., & Jameel, H. (2002). Oxygen Degradation and Spectroscopic Characterization of Hardwood Kraft Lignin. Industrial & Engineering Chemistry Research, 41(24), 5941–5948. https://doi.org/10.1021/ie020007k

Kadla, J. F., Kubo, S., Venditti, R. A., Gilbert, R. D., Compere, A. L., & Griffith, W. (2002). Lignin-based carbon fibers for composite fiber applications. Carbon, 40(15), 2913–2920. https://doi.org/10.1016/S0008-6223(02)00248-8

Buehlmann, U., & Thomas, R. E. (2002). Impact of human error on lumber yield in rough mills. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, Vol. 18, pp. 197–203. https://doi.org/10.1016/S0736-5845(02)00010-8

Chiang, V. L. (2002). From rags to riches. NATURE BIOTECHNOLOGY, 20(6), 557–558. https://doi.org/10.1038/nbt0602-557

Carrano, A. L., Taylor, J. B., & Lemaster, R. (2002). Parametric characterization of peripheral sanding. Forest Products Journal, 52(9), 44–50.