Forest Biomaterials - 2003 Ayoub, A., Gruyer, S., & Bliard, C. (2003). Enzymatic degradation of hydroxypropyltrimethylammonium wheat starches. International Journal of Biological Macromolecules, 32(3-5), 209–216. https://doi.org/10.1016/s0141-8130(03)00057-6 Ayoub, A., & Bliard, C. (2003). Cationisation of Glycerol Plasticised Wheat Starch under Microhydric Molten Conditions. Starch - Stärke, 55(7), 297–303. https://doi.org/10.1002/star.200390064 Doshi, M. R., Blanco, A., Negro, C., Monte, C., Dorris, G. M., Castro, C. C., … al. (2003). Comparison of Micro Stickies Measurement Methods Part II: Results and Discussion. Progress in Paper Recycling, 13(1), 44–53. Doshi, M. R., Moore, W., Copeland, K., Venditti, R., Chang, H. M., Putz, H., … al. (2003). Comparison of Macro Stickies Measurement Methods Part I: Sample Preparation and Measurement Methods. Progress in Paper Recycling, 12(3), 34–43. Karunakaran, M., Ramasubramanian, M. K., & Venditti, R. A. (2003). Mechatronic Design and Control of a Waste Paper Sorting System for Efficient Recycling: Development of a Lignin Sensor to Distinguish Recovered Paper Grades at High Speed. TAPPI Technical Conference. Presented at the TAPPI Technical Conference. Molnár, S., Peszlen, I., Führer, E., & Fehér, S. (2003). Wood Quality of Poplars in Hungary. IUFRO All Division 5 Conference. Presented at the IUFRO All Division 5 Conference, Rotorua, New Zealand. Determination of total petroleum hydrocarbons in soil by dynamic on-line supercritical fluid extraction with infrared photometric detection. (2003). Journal of Chromatography. A. https://doi.org/10.1016/s0021-9673(02)01917-9 Saloni, D., Buehlmann, U., & Lemaster, R. (2003). Woodfiber-Plastic Composites Machining Characteristics. Presented at the 14th The International Conference on Composite Materials, Society of Manufacturing Engineers, San Diego, CA. Saloni, D., Carrano, A., & Lemaster, R. (2003). Comparison between different geometric shapes of engineered abrasives on material removal and surface quality. Presented at the Industrial Engineering Research Conference, Portland, OR. Bashashati, A., Ward, R. K., Birch, G. E., Hashemi, M. R., & Khalilzadeh, M. A. (2003). Fractal Dimension-Based EEG Biofeedback System. Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings, 3, 2220–2223. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-1542330981&partnerID=MN8TOARS Nasrabadi, A. M., Golpayegani, M. H., Khalilzadeh, M., & Sharifi, A. (2003). Comparison between linear and nonlinear EEC signal processing during different mental activities. Amirkabir (Journal of Science and Technology), 14(55 A), 592–600. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-3042686975&partnerID=MN8TOARS Tavakolian, K., Nasrabadi, A. M., Setarehdan, S. K., Khalilzadeh, M. A., Miri, R., & Falaknaz, M. (2003). Effects of different feature vectors and neural network topology on EEG mental tasks classification. Proceedings of the IASTED International Conference on Biomedical Engineering, 39–43. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-2642576046&partnerID=MN8TOARS Park, S., Venditti, R. A., Jameel, H., Pawlak, J., & Byrd, M. (2003). The Effect of Operating Variables on the Mass Balance of Fiber Fractionation Using a Hydrocyclone. TAPPI Technical Conference. Presented at the TAPPI Technical Conference, Chicago Hyatt Hotel. Doshi, M. R., Blanco, A., Negro, C., Monte, C., Dorris, G. M., Castro, C. C., … Chang, H. M. (2003). Comparison of Micro Stickies Measurement Methods Part II: Results and Discussion. Progress in Paper Recycling, 13(1), 44–53. Doshi, M. R., Moore, W., Copeland, K., Venditti, R., Chang, H. M., Putz, H., … Robinson, D. (2003). Comparison of Macro Stickies Measurement Methods Part I: Sample Preparation and Measurement Methods. Progress in Paper Recycling, 12(3), 34–43. Welf, E. S., Venditti, R. A., Jameel, H., & Renard, J. J. (2003). Pulping Wax Containing Old Corrugated Containers with Hardwood Chips in a Kraft Pulping Operation. Progress in Paper Recycling, 12(2), 13–18. Ernest, R. A., Venditti, R. A., Argyropolous, D. S., & Gilbert, R. D. (2003). Fractionation of Paper Recycling Deinking Sludge for Potential Utilization in the Production of Ethanol. Abstracts of the Second Annual NC State University Undergraduate Summer Research Program Symposium, 28. Raleigh, NC: North Carolina State University. Ashcraft, D. K., Lake, K. M., Wallace, J. T., & Venditti, R. A. (2003). Improving Strength Potential of Recycled OCC using High Consistency Mechanical Pretreatment. 12th Annual North Carolina State University Undergraduate Research Symposium. Presented at the The 12th Annual North Carolina State University Undergraduate Research Symposium. Doshi, M. R., Moore, B., Copeland, K., Venditti, R., Delagoutte, T., Houtman, C., … Sauve, G. (2003). Comparison of Macro Stickies Measurement Methods. TAPPI Technical Conference. Presented at the TAPPI Technical Conference, Chicago, Illinois. Ban, W., Song, J., & Lucia, L. (2003). Insight into the chemical behavior of softwood carbohydrates during high sulfidity green liquor pretreatment. Industrial & Engineering Chemistry Research, 43, 1366–1372. https://doi.org/10.1021/ie034030x Cai, Z., Qiu, Y., Hwang, Y. J., Zhang, C., & McCord, M. (2003). The Use of Atmospheric Pressure Plasma Treatment in Desizing PVA on Viscose Fabrics. Journal of Industrial Textiles, 32(3), 223–232. https://doi.org/10.1177/1528083703032003005 Wheeler, E. A., & Michalski, T. M. (2003). Paleocene and Eocene woods of the Denver Basin, Colorado. Rocky Mountain Geology, 38, 29–43. https://doi.org/10.2113/gsrocky.38.1.29 McCord, M. G., & Blanchard, S. M. (2003). Use of a single team-based written project to address multiple objectives and outcomes for a biomedical engineering program. 2003 ASEE annual conference and exposition. Washington, DC : ASEE. McCord, M. G., & Nerz, H. M. (2003). Using information literacy standards to meet ABET accreditation outcomes. 2003 ASEE annual conference and exposition: June 22-25, 2003, Nashville, TN. Washington, DC: ASEE. Mancosky, D., & Lucia, L. A. (2003). The brightness response of lignocellulosic and cellulosic fibers to hydrogen peroxide. Cellulose Chemistry and Technology, 37, 117–129. Ban, W. P., & Lucia, L. A. (2003). Relationship between the kraft green liquor sulfide chemical form and the physical and chemical behavior of softwood chips during pretreatment. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 42(16), 3831–3837. https://doi.org/10.1021/ie030018t Ban, W., & Lucia, L. A. (2003). Melhorando A polpacao Kraft mediante licores de pre-tratamento nao convencionais, com maior teor de sulfeto--uma revisao. O Papel, 64, 21–31. Ban, W., Singh, J., A., & Lucia, L. (2003). Kraft green liquor pretreatment of softwood chips. Part III: Lignin chemical modifications. HOLZFORSCHUNG, 57(3), 275–281. https://doi.org/10.1515/HF.2003.041 Ban, W., Singh, J., Wang, S., & Lucia, L. A. (2003). Kraft green liquor pretreatment of softwood chips. Part II: Chemical effect on pulp carbohydrates. Journal of Pulp and Paper Science, 4, 114–119. Ban, W. P., & Lucia, L. A. (2003). Kraft green liquor pretreatment of softwood chips. 1. Chemical sorption profiles. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 42(3), 646–652. https://doi.org/10.1021/ie020491r Fu, S. Y., & Lucia, L. A. (2003). Investigation of the chemical basis for inefficient lignin removal in softwood kraft pulp during oxygen delignification. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 42(19), 4269–4276. https://doi.org/10.1021/ie030231p Chen, S. L., & Lucia, L. A. (2003). Improved method for evaluation of cellulose degradation. JOURNAL OF WOOD SCIENCE, 49(3), 285–288. https://doi.org/10.1007/s10086-002-0483-9 Pu, Y., Anderson, S., Lucia, L., & Ragauskas, A. J. (2003). Fundamentals of photobleaching lignin. Part I: Photobehaviours of acetylated softwood BCTMP lignin. Journal of Pulp and Paper Science, 29(12), 401–406. Ban, W., & Lucia, L. A. (2003). Enhancing Kraft pulping through unconventional, higher sulfide-containing pretreatment liquors: a review. TAPPI Journal, 2. Lucia, L. A., Yui, T., Sasai, R., Takagi, S., Takagi, K., Yoshida, H., … Inoue, H. (2003). Enhanced aggregation behavior of antimony(V) porphyrins in polyfluorinated surfactant/clay hybrid microenvironment. JOURNAL OF PHYSICAL CHEMISTRY B, 107(16), 3789–3797. https://doi.org/10.1021/jp026648a Chai, X.-S., Hou, Q.-X., Zhu, J. Y., Chen, S.-L., Wang, S. F., & Lucia, L. (2003). Determination of content of carboxyl groups in pulps by headspace gas chromatography. Industrial & Engineering Chemistry Research, 42, 5440–5444. https://doi.org/10.1021/ie020972a Wang, S., Lucia, L. A., & Yang, Q. (2003). Application of steam explosion deinking technology to wastepaper. Cellulose Chemistry and Technology, 37, 453–461. Schulte, L., Mancosky, D., Lucia, L. A., & El-Sayed, M. (2003). A novel FT-IR spectral characterization method to establish the relationship between lignin and kappa number for oxygen delignified Kraft pulps. Cellulose Chemistry and Technology, 37, 201–208. Meglen, R. R., & Kelley, S. S. (2003). Use of a region of the visible and near infrared spectrum to predict mechanical properties of wet wood and standing trees. Washington, DC: U.S. Patent and Trademark Office. Kelley, S. S. (2003). Method of predicting mechanical properties of decayed wood. Washington, DC: U.S. Patent and Trademark Office. Meglen, R. R., & Kelley, S. S. (2003). Method for predicting dry mechanical properties from wet wood and standing trees. Washington, DC: U.S. Patent and Trademark Office. Sykes, R., Isik, F., Li, B., Kadla, J., & Chang, H.-M. (2003). Genetic variation of juvenile wood properties in loblolly pine diallel test. Proc. 27th Biennial Southern Forest Tree Improvement Conference, Vol. 27, p. 27. Fadeev, A. G., Kelley, S. S., McMillan, J. D., Selinskaya, Y. A., Khotimsky, V. S., & Volkov, VV. (2003). Effect of yeast fermentation by-products on poly[1-(trimethylsilyl)-1-propyne] pervaporative performance. JOURNAL OF MEMBRANE SCIENCE, 214(2), 229–238. https://doi.org/10.1016/S0376-7388(02)00550-1 McCord, M. G., Blanchard, S. M., Mente, P. L., Nagle, H. T., & Spurlin, J. E. (2003). Outcomes based curriculum development in a new and emerging biomedical engineering program. American Society for Engineering Education. Hubbe, M. A., Venditti, R. A., Barbour, R. L., & Zhang, M. (2003). Changes to unbleached kraft fibers due to drying and recycling. Progress in Paper Recycling, 12(3), 11–20. Hwang, Y. J., An, J. S., McCord, M. G., Park, S. W., & Kang, B. C. (2003). The effect of etching on low-stress mechanical properties of polypropylene fabrics under helium/oxygen atmospheric pressure plasma. FIBERS AND POLYMERS, 4(4), 145–150. https://doi.org/10.1007/BF02908270 Lavin, M., Wojciechowski, M. F., Gasson, P., Hughes, C., & Wheeler, E. (2003). Phylogeny of robinioid legumes (Fabaceae) revisited: Coursetia and Gliricidia recircumscribed, and a biogeographical appraisal of the Caribbean endemics. Systematic Botany, 28(2), 387–409. Chen, J. H., Heitmann, J. A., & Hubbe, M. A. (2003). Dependency of polyelectrolyte complex stoichiometry on the order of addition. 1. Effect of salt concentration during streaming current titrations with strong poly-acid and polybase. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 223(1-3), 215–230. https://doi.org/10.1016/S0927-7757(03)00222-X Holtman, K. M., Chang, H. M., Jameel, H., & Kadla, J. F. (2003). Elucidation of lignin structure through degradative methods: Comparison of modified DFRC and thioacidolysis. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, 51(12), 3535–3540. https://doi.org/10.1021/jf0340411 Li, L., Zhou, Y. H., Cheng, X. F., Sun, J. Y., Marita, J. M., Ralph, J., & Chiang, V. L. (2003). Combinatorial modification of multiple lignin traits in trees through multigene cotransformation. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 100(8), 4939–4944. https://doi.org/10.1073/pnas.0831166100 Stasolla, C., Scott, J., Egertsdotter, U., Kadla, J., D O'Malley, Sederoff, R., & Zyl, L. (2003). Analysis of lignin produced by cinnamyl alcohol dehydrogenase-deficient Pinus taeda cultured cells. PLANT PHYSIOLOGY AND BIOCHEMISTRY, 41(5), 439–445. https://doi.org/10.1016/S0981-9428(03)00051-2 Jaaskelainen, A. S., Sun, Y., Argyropoulos, D. S., Tamminen, T., & Hortling, B. (2003). The effect of isolation method on the chemical structure of residual lignin. WOOD SCIENCE AND TECHNOLOGY, 37(2), 91–102. https://doi.org/10.1007/s00226-003-0163-y Chen, C. L., Capanema, E. A., & Gracz, H. S. (2003). Reaction mechanisms in delignification of pine Kraft-AQ pulp with hydrogen peroxide using Mn(IV)-Me4DTNE as catalyst. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, 51(7), 1932–1941. https://doi.org/10.1021/jf020992n Yang, R. M., Lucia, L., Ragauskas, A. J., & Jameel, H. (2003). Oxygen delignification chemistry and its impact on pulp fibers. JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY, 23(1), 13–29. https://doi.org/10.1081/WCT-120018613 Sheikh-Ahmad, J. Y., Stewart, J. S., & Feld, H. (2003). Failure characteristics of diamond-coated carbides in machining wood-based composites. WEAR, Vol. 255, pp. 1433–1437. https://doi.org/10.1016/S0043-1648(03)00179-0 Buehlmann, U., Wiedenbeck, J. K., & Kline, D. E. (2003). Effect of cutting bill requirements on lumber yield in a rip-first rough mill. Wood and Fiber Science, 35(2), 187–200. Cai, Z. S., Qiu, Y. P., Zhang, C. Y., Hwang, Y. J., & McCord, M. (2003). Effect of atmospheric plasma treatment on desizing of PVA on cotton. Textile Research Journal, 73(8), 670–674. https://doi.org/10.1177/004051750307300803 Heiduschke, A., & Kasal, B. (2003). Composite cross sections with high performance fiber reinforced concrete and timber. Forest Products Journal, 53(10), 74–78. Kubo, S., & Kadla, J. F. (2003). The formation of strong intermolecular interactions in immiscible blends of poly(vinyl alcohol) (PVA) and lignin. BIOMACROMOLECULES, 4(3), 561–567. https://doi.org/10.1021/bm025727p McCord, M. G., Hwang, Y. J., Qiu, Y., Hughes, L. K., & Bourham, M. A. (2003). Surface analysis of cotton fabrics fluorinated in radio-frequency plasma. JOURNAL OF APPLIED POLYMER SCIENCE, 88(8), 2038–2047. https://doi.org/10.1002/app.11896 Kasal, B. (2003). Semi-destructive method for in-situ evaluation of compressive strength of wood structural members. Forest Products Journal, 53(12-Nov), 55–58. Crestini, C., Jurasek, L., & Argyropoulos, D. S. (2003). On the mechanism of the laccase-mediator system in the oxidation of lignin. CHEMISTRY-A EUROPEAN JOURNAL, 9(21), 5371–5378. https://doi.org/10.1002/chem.200304818 Sykes, R., Isik, F., Li, B. L., Kadla, J., & Chang, H. M. (2003). Genetic variation of juvenile wood properties in a loblolly pine progeny test. TAPPI Journal, 2(12), 08-. Pawlak, J. J., & Keller, D. S. (2003). Measurement of the local compressive characteristics of polymeric film and web structures using micro-indentation. POLYMER TESTING, 22(5), 515–528. https://doi.org/10.1016/S0142-9418(02)00146-0 Alves, V., Capanema, E., Chen, C. L., & Gratzl, J. (2003). Comparative studies on oxidation of lignin model compounds with hydrogen peroxide using Mn(IV)-Me(3)TACN and Mn(IV)-Me4DTNE as catalyst. JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL, 206(1-2), 37–51. https://doi.org/10.1016/S1381-1169(03)00448-5 Kadla, J. F., & Kubo, S. (2003). Miscibility and hydrogen bonding in blends of poly(ethylene oxide) and kraft lignin. Macromolecules, 36(20), 7803–7811. https://doi.org/10.1021/ma0348371d Balakshin, M. Y., Capanema, E. A., Chen, C. L., & Gracz, H. S. (2003). Elucidation of the structures of residual and dissolved pine kraft lignins using an HMQC NMR technique. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, 51(21), 6116–6127. https://doi.org/10.1021/jf034372d Hwang, Y. J., Qiu, Y., Zhang, C., Jarrard, B., Stedeford, R., Tsai, J., … McCord, M. (2003). Effects of atmospheric pressure helium/air plasma treatment on adhesion and mechanical properties of aramid fibers. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 17(6), 847–860. https://doi.org/10.1163/156856103321645194 Chen, C. L., Capanema, E. A., & Gracz, H. S. (2003). Comparative studies on the delignification of pine kraft-anthraquinone pulp with hydrogen peroxide by binucleus Mn(IV) complex catalysis. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, 51(21), 6223–6232. https://doi.org/10.1021/jf034507f Peralta, P. N., & Bangi, A. P. (2003). A nonlinear regression technique for calculating the average diffusion coefficient of wood during drying. Wood and Fiber Science, 35(3), 401–408. Kishimoto, T., Kadla, J. F., Chang, H. M., & Jameel, H. (2003). The reactions of lignin model compounds with hydrogen peroxide at low pH. HOLZFORSCHUNG, 57(1), 52–58. https://doi.org/10.1515/HF.2003.008 Zhu, T., Kadla, J. F., Chang, H. M., & Jameel, H. (2003). Reactions of lignin with peroxymonophosphoric acid: The degradation of lignin model compounds. HOLZFORSCHUNG, 57(1), 44–51. https://doi.org/10.1515/HF.2003.007 Clark, W. I., Shih, A. J., Lemaster, R. L., & McSpadden, S. B. (2003). Fixed abrasive diamond wire machining - part II: experiment design and results. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 43(5), 533–542. https://doi.org/10.1016/S0890-6955(02)00216-X Clark, W. I., Shih, A. J., Hardin, C. W., Lemaster, R. L., & McSpadden, S. B. (2003). Fixed abrasive diamond wire machining - part I: process monitoring and wire tension force. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 43(5), 523–532. https://doi.org/10.1016/S0890-6955(02)00215-8 Zhu, T., Chang, H. M., & Kadla, J. F. (2003). A new method for the preparation of peroxymonophosphoric acid. CANADIAN JOURNAL OF CHEMISTRY, 81(2), 156–160. https://doi.org/10.1139/V03-010 Paevere, P. J., Foliente, G. C., & KasaL, B. (2003). Load-sharing and redistribution in a one-story woodframe building. Journal of Structural Engineering (New York, N.Y.), 129(9), 1275–1284. https://doi.org/10.1061/(asce)0733-9445(2003)129:9(1275) Hubbe, M. A., Jackson, T. L., & Zhang, M. (2003). Fiber surface saturation as a strategy to optimize dual-polymer dry strength treatment. TAPPI Journal, 2(11), 12-. Sheikh-Ahmad, J. Y., Lewandowski, C. M., Bailey, J. A., & Stewart, J. S. (2003). Experimental and numerical method for determining temperature distribution in a wood cutting tool. EXPERIMENTAL HEAT TRANSFER, 16(4), 255–271. https://doi.org/10.1080/08916150390223092 Thomas, E., & Buehlmann, U. (2003). Performance review of the ROMI-RIP rough mill simulator. Forest Products Journal, 53(3), 80–85.