Forest Biomaterials - 2018

Farhat, W., Hasan, A., Lucia, L., Becquart, F., Ayoub, A., & Kobeissy, F. (2018). Hydrogels for Advanced Stem Cell Therapies: A Biomimetic Materials Approach for Enhancing Natural Tissue Function. IEEE Reviews in Biomedical Engineering, 12, 333–351. https://doi.org/10.1109/RBME.2018.2824335

Lucia, L., & Ayoub, A. (Eds.). (2018). Polysaccharide-based Fibers and Composites. https://doi.org/10.1007/978-3-319-56596-5

Li, T., Lyu, G., Saeed, H. A. M., Liu, Y., Wu, Y., Yang, G., & Lucia, L. A. (2018). Analytical Pyrolysis Characteristics of Enzymatic/Mild Acidolysis Lignin (EMAL). BioResources, 13(2). https://doi.org/10.15376/biores.13.2.4484-4496

Wang, G., Peralta, P., Mitchell, P., & Peszlen, I. (2018). Fire Performance of Southern Yellow Pine Cross-Laminated Timber. Society of Wood Science and Technology 2018 International Convention. Presented at the Society of Wood Science and Technology 2018 International Convention, Nagoya, Japan.

Peszlen, I., Miller, Z. D., Edmunds, C. W., & Peralta, P. (2018). Morphological and Mechanical Properties of Transgenic Poplars and Pines with Modified Cell Wall Components. Society of Wood Science and Technology 2018 International Convention. Presented at the Society of Wood Science and Technology 2018 International Convention, Nagoya, Japan.

Wang, G., Peralta, P., Mitchell, P., & Peszlen, I. (2018). Moisture Transport in Southern Yellow Pine Cross-Laminated Timber. Society of Wood Science and Technology 2018 International Convention. Presented at the Society of Wood Science and Technology 2018 International Convention, Nagoya, Japan.

Jorge, J., Pereira, J. C., Rodriguez, M., Barrios, N., Oliva, D., & Antonio, J. (2018). Impedance spectroscopy in water/oil emulsions in a range of intermediate frequencies. Ingenieŕıa UC, 25(3), 388–395.

Ayoub, A., & Lucia, L. A. (2018). Biomass extrusion and reaction technologies : principles to practices and future potential. Washington, D.C.: American Chemical Society.

Saloni, D., Mervine, N., & Verdi, C. (2018). Design and Development of Biopolymers for Additive Manufacturing. Peer-Reviewed Proceedings of the 2018 Industrial and Systems Engineering, 330–335.

Zareyee, D., Rad, A. S., Ataei, Z., Javadi, S. H., & Khalilzadeh, M. A. (2018). Three-component solventless Strecker synthesis of α-aminonitriles catalysed by a renewable sulfonated nanoporous carbon catalyst (CMK-5-SO<inf>3</inf>H). Applied Organometallic Chemistry, 32(8). https://doi.org/10.1002/aoc.4422

Mirosanloo, A., Zareyee, D., & Khalilzadeh, M. A. (2018). Recyclable cellulose nanocrystal supported Palladium nanoparticles as an efficient heterogeneous catalyst for the solvent-free synthesis of coumarin derivatives via von Pechmann condensation. Applied Organometallic Chemistry, 32(12). https://doi.org/10.1002/aoc.4546

Ayoub, A., & Lucia, L. (Eds.). (2018). Biomass extrusion and reaction technologies : principles to practices and future potential. https://doi.org/10.1021/bk-2018-1304

Lubna, M. M., Salem, K. S., Sarker, M., & Khan, M. A. (2018). Modification of Thermo-Mechanical Properties of Recycled PET by Vinyl Acetate (VAc) Monomer Grafting Using Gamma Irradiation. Journal of Polymers and the Environment, 26(1), 83–90. https://doi.org/10.1007/s10924-016-0922-0

Sharmeen, S., Rahman, A. F. M. M., Lubna, M. M., Salem, K. S., Islam, R., & Khan, M. A. (2018). Polyethylene glycol functionalized carbon nanotubes/gelatin-chitosan nanocomposite: An approach for significant drug release. Bioactive Materials, 3(3), 236–244. https://doi.org/10.1016/j.bioactmat.2018.03.001

Agate, S., Tyagi, P., Pal, L., & Lucia, L. (2018). Novel approaches to paper surface treatment for high-speed inkjet production printing. Paper Conference and Trade Show, PaperCon 2018, 3, 1598–1610. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85060391507&partnerID=MN8TOARS

Determinação de formaldeído pelo método dessecador utilizando reagente analítico acetilacetona: modificação da norma ASTM D 5582. (2018, December). Embrapa Florestas.

De Assis, T., Reisinger, L. W., Dasmohapatra, S., Pawlak, P., Jameel, H., Pal, L., … Gonzalez, R. W. (2018). Performance and Sustainability vs. the shelf price of tissue paper kitchen towels. BioResources, 13(3), 6868–6892. Retrieved from https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_13_3_6868_De_Assis_Sustainability_Tissue_Paper_Kitchen/6279

Geng, W., Venditti, R. A., Pawlak, J. J., & Chang, H.-min. (2018). Effect of delignification on hemicellulose extraction from switchgrass, poplar, and pine and its effect on enzymatic convertibility of cellulose-rich residues. BioResources, 13(3), 4946–4963. https://doi.org/10.15376/biores.13.3.4946-4963

Rice, M., Pal, L., Gonzalez, R., & Hubbe, M. (2018). Wet-end addition of nanofibrillated cellulose pretreated with cationic starch to achieve paper strength with less refining and higher bulk. July 2018, 17(07), 395–403. https://doi.org/10.32964/tj17.07.395

Joyce, M., Pal, L., & Tran, T. (2018). Production of polyhydroxyalkanoates (PHA)-based renewable packaging materials using photonic energy: A bench and pilot-scale study. Octobr 2018, 17(10), 557–565. https://doi.org/10.32964/tj17.10.557

Tyagi, P., Mathew, R., Opperman, C., Jameel, H., Gonzalez, R., Lucia, L., … Pal, L. (2018). High-Strength Antibacterial Chitosan–Cellulose Nanocrystal Composite Tissue Paper. Langmuir, 35(1), 104–112. https://doi.org/10.1021/acs.langmuir.8b02655

Cran, M. J., Bigger, S. W., Venditti, R. A., Pawlak, J. J., Livi, S., & Ayoub, A. (2018). Melt Stability of Starch-Filled LDPE during Multi-Pass Extrusion Determined by Melt-Flow and Non-Isothermal Thermogravimetric Investigations. In ACS Symposium Series (pp. 115–136). https://doi.org/10.1021/bk-2018-1304.ch006

Milotskyi, R., Bliard, C., Venditti, R., & Ayoub, A. (2018). Starch Extrudates as Sustainable Ingredients in Food and Non-Food Applications. In ACS Symposium Series (Vol. 1304, pp. 89–113). https://doi.org/10.1021/bk-2018-1304.ch005

Rice, M. C., Pal, L., Gonzalez, R., & Hubbe, M. A. (2018). Wet-end addition of nanofibrillated cellulose pretreated with cationic starch to achieve paper strength with less refining and higher bulk. Tappi Journal, Vol. 17, pp. 395–403. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85060351840&partnerID=MN8TOARS

Zambrano, F., De Assis, T., Abbati, C., Gonzalez, R., Venditti, R., Pawlak, J., … Phillips, R. (2018). Understanding the effect of nanocellulose on hygiene tissue properties. Tissue World Miami 2018. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85062667219&partnerID=MN8TOARS

Naithani, V., Tyagi, P., Lucia, L., Pal, L., Jameel, H., & Gonzalez, R. (2018). Highly green and favorable energetics for generating non-wood fibers for tissue production. Tissue Conference and Expo 2018: In the Heart of the North American Tissue Industry, 11–26. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85071086740&partnerID=MN8TOARS

De Assis, C. A., Ago, M., Greca, L., Jameel, H., Gonzalez, R. W., & Rojas, O. J. (2018). Bio-nanomaterials development: Linking R&D activities and industrialization of lignin micro-and nanoparticles. International Conference on Nanotechnology for Renewable Materials 2018, 1, 34–47. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85060479015&partnerID=MN8TOARS

Marquez, R., Forgiarini, A. M., Fernández, J., Langevin, D., & Salager, J.-L. (2018). New Interfacial Rheology Characteristics Measured using a Spinning-Drop Rheometer at the Optimum Formulation of a Simple Surfactant-Oil-Water System. Journal of Surfactants and Detergents, 21(5), 611–623. https://doi.org/10.1002/jsde.12163

Zamora, J. M., Marquez, R., Forgiarini, A. M., Langevin, D., & Salager, J.-L. (2018). Interfacial rheology of low interfacial tension systems using a new oscillating spinning drop method. Journal of Colloid and Interface Science, 519, 27–37. https://doi.org/10.1016/j.jcis.2018.02.015

Tolosa, L., Marquez, R., Rennola, L., Sandia, B., & Bullon, J. (2018). An overview of today's project-based learning and how it has been implemented in the Chemical Engineering School at Universidad de Los Andes. Educación Química. https://doi.org/10.22201/fq.18708404e.2018.4.64701

Marquez, R., Forgiarini, A. M., Langevin, D., & Salager, J.-L. (2018). Instability of Emulsions Made with Surfactant–Oil–Water Systems at Optimum Formulation with Ultralow Interfacial Tension. Langmuir, 34(31), 9252–9263. https://doi.org/10.1021/acs.langmuir.8b01376

Wang, Y., de Assis, T., Zambrano, F., Pal, L., Venditti, R., Dasmohapatra, S., … Gonzalez, R. (2018). Relationship between human perception of softness and instrument measurements. BioResources, 14(1), 780–795. https://doi.org/10.15376/biores.14.1.780-795

Ming, C., Yang, T., Luan, K., Chen, L., Wang, L., Zeng, J., … Chen, L.-Q. (2018). Microstructural effects on effective piezoelectric responses of textured PMN-PT ceramics. Acta Materialia, 145, 62–70. https://doi.org/10.1016/j.actamat.2017.11.043

Luan, K., Liu, J., Sun, B., Zhang, W., Hu, J., Fang, X., … Song, E. (2018). High strain rate compressive response of the C<inf>f</inf>/SiC composite. Ceramics International. https://doi.org/10.1016/j.ceramint.2018.12.174

McFarland, D. C., Poppo, M. N., McCain, E. M., & Saul, K. R. (2018). Spatial dependency of shoulder muscle demand during dynamic unimanual and bimanual pushing and pulling. Applied Ergonomics, 73, 199–205. https://doi.org/10.1016/J.APERGO.2018.07.011

Hennen, K., Crouch, D. L., Hutchinson, I. D., Li, Z., & Saul, K. (2018). Relationship between glenoid deformity and gait characteristics in a rat model of neonatal brachial plexus injury. Journal of Orthopaedic Research®, 36(7), 1991–1997. https://doi.org/10.1002/JOR.23836

de Assis, C. A., Iglesias, M. C., Bilodeau, M., Johnson, D., Phillips, R., Peresin, M. S., … Gonzalez, R. (2018). Cover Image, Volume 12, Issue 2. Biofuels, Bioproducts and Biorefining, 12(2), i-i. https://doi.org/10.1002/BBB.1874

Rudi, H., Ghorbannazhad, P., & Hubbe, M. A. (2018). Optimizing the mechanical properties of papers reinforced with refining and layer-by-layer treated recycled fibers using response surface methodology. Carbohydrate Polymers, 200, 391–399. https://doi.org/10.1016/J.CARBPOL.2018.08.006

Pupier, M., Nuzillard, J.-M., Wist, J., Schlörer, N. E., Kuhn, S., Erdelyi, M., … Jeannerat, D. (2018). NMReDATA, a standard to report the NMR assignment and parameters of organic compounds. Magnetic Resonance in Chemistry, 56(8), 703–715. https://doi.org/10.1002/MRC.4737

Boes, K. S., Narron, R. H., Park, S., & Vinueza, N. R. (2018). Mass Spectrometry Exposes Undocumented Lignin-Carbohydrate Complexes in Biorefinery Pretreatment Stream. ACS Sustainable Chemistry & Engineering, 6(8), 10654–10659. https://doi.org/10.1021/ACSSUSCHEMENG.8B01986

Barton, R. R., Carrier, M., Segura, C., Fierro, J. L. G., Park, S., Lamb, H. H., … Peretti, S. W. (2018). Ni/HZSM-5 catalyst preparation by deposition-precipitation. Part 2. Catalytic hydrodeoxygenation reactions of lignin model compounds in organic and aqueous systems. Applied Catalysis A: General, 562, 294–309. https://doi.org/10.1016/J.APCATA.2018.06.012

Liu, L., Chang, H.-min, Jameel, H., & Park, S. (2018). Furfural production from biomass pretreatment hydrolysate using vapor-releasing reactor system. Bioresource Technology, 252, 165–171. https://doi.org/10.1016/J.BIORTECH.2018.01.006

Jiang, W., Chu, J., Wu, S., & Lucia, L. A. (2018). Modeling the pyrolytic behavior of lignin through two representative monomers: Vanillin and acetovanillone. Journal of Analytical and Applied Pyrolysis, 130, 241–248. https://doi.org/10.1016/J.JAAP.2018.01.001

Jiang, W., Chu, J., Wu, S., & Lucia, L. A. (2018). Modeling pyrolytic behavior of pre-oxidized lignin using four representative β-ether-type lignin-like model polymers. Fuel Processing Technology, 176, 221–229. https://doi.org/10.1016/J.FUPROC.2018.03.041

Ou, L., Luo, G., Ray, A., Li, C., Hu, H., Kelley, S., & Park, S. (2018). Understanding the Impacts of Biomass Blending on the Uncertainty of Hydrolyzed Sugar Yield from a Stochastic Perspective. ACS Sustainable Chemistry & Engineering, 6(8), 10851–10860. https://doi.org/10.1021/ACSSUSCHEMENG.8B02150

Kim, H., Vinueza, N. R., Kelley, S. S., & Park, S. (2018). Correlation between solubility parameters and recovery of phenolic compounds from fast pyrolysis bio-oil by diesel extraction. Carbon Resources Conversion, 1(3), 238–244. https://doi.org/10.1016/J.CRCON.2018.08.004

Lan, K., Sun, H., & Bernitsas, M. M. (2018). Two Tandem Cylinders With Passive Turbulence Control in Flow-Induced Vibration: Relation of Oscillation Patterns to Frequency Response. Journal of Offshore Mechanics and Arctic Engineering, 140(3). https://doi.org/10.1115/1.4038935

Cornelius, C., McCord, M., Bourham, M., & Hauser, P. (2018). Atmospheric Pressure Plasma Grafting of a Vinyl-Quaternary Compound to Nonwoven Polypropylene and Cotton. Journal of Engineered Fibers and Fabrics, 13(3), 155892501801300. https://doi.org/10.1177/155892501801300306

Shi, Q., Jolly, M., McCord, M. G., & Joy, M. S. (2018). Surface-Engineered Blood Adsorption Device for Hyperphosphatemia Treatment. ASAIO Journal, 64(3), 389–394. https://doi.org/10.1097/MAT.0000000000000639

Jardim, J. M., Jardim, C. M., & Colodette, J. L. (2018). Understanding the pulping and bleaching performances of eucalyptus woods affected by physiological disturbance. TAPPI JOURNAL, 17(11), 633–642. https://doi.org/10.32964/TJ17.11.633

Brogdon, B. N., & Lucia, L. A. (2018). Using multistage models to evaluate how pulp washing after the first extraction stage impacts elemental chlorine-free bleach demand. TAPPI JOURNAL, 17(11), 621–630. https://doi.org/10.32964/TJ17.11.621

Mohtat, B., Siadati, S. A., Khalilzadeh, M. A., & Zareyee, D. (2018). The concern of emergence of multi-station reaction pathways that might make stepwise the mechanism of the 1,3-dipolar cycloadditions of azides and alkynes. Journal of Molecular Structure, 1155, 58–64. https://doi.org/10.1016/j.molstruc.2017.10.034

Alavi-Tabari, S. A. R., Khalilzadeh, M. A., & Karimi-Maleh, H. (2018). Simultaneous determination of doxorubicin and dasatinib as two breast anticancer drugs uses an amplified sensor with ionic liquid and ZnO nanoparticle. Journal of Electroanalytical Chemistry, 811, 84–88. https://doi.org/10.1016/j.jelechem.2018.01.034

Teymoori, N., Raoof, J. B., Khalilzadeh, M. A., & Ojani, R. (2018). An electrochemical sensor based on CuO nanoparticle for simultaneous determination of hydrazine and bisphenol A. Journal of the Iranian Chemical Society, 15(10), 2271–2279. https://doi.org/10.1007/s13738-018-1416-x

Alavi-Tabari, S. A. R., Khalilzadeh, M. A., Karimi-Maleh, H., & Zareyee, D. (2018). An amplified platform nanostructure sensor for the analysis of epirubicin in the presence of topotecan as two important chemotherapy drugs for breast cancer therapy. New Journal of Chemistry, 42(5), 3828–3832. https://doi.org/10.1039/c7nj04430e

Tripathi, A., Ago, M., Khan, S. A., & Rojas, O. J. (2018). Heterogeneous Acetylation of Plant Fibers into Micro- and Nanocelluloses for the Synthesis of Highly Stretchable, Tough, and Water-Resistant Co-continuous Filaments via Wet-Spinning. ACS APPLIED MATERIALS & INTERFACES, 10(51), 44776–44786. https://doi.org/10.1021/acsami.8b17790

Wu, Y., Saeed, H. A. M., Li, T., Lyu, G., Wang, Z., Liu, Y., … Lucia, L. A. (2018). Organic Solvent Isolation and Structural Characterization of Willow Lignin. BIORESOURCES, 13(4), 7957–7968. https://doi.org/10.15376/biores.13.4.7957-7968

Edwards, K., Campbell, L., Lemaster, R., & Velarde, G. (2018). The Use of Acoustic Emission to Detect Fines for Wood Based Composites, Part Two: Use on Flakes. BIORESOURCES, 13(4), 8751–8760. https://doi.org/10.15376/biores.13.4.8751-8760

Miller, Z. D., Peralta, P. N., Mitchell, P., Chiang, V. L., Edmunds, C. W., & Peszlen, I. M. (2018). Altered Lignin Content and Composition in Transgenic Populus trichocarpa Results in a Decrease of Modulus of Elasticity. BIORESOURCES, 13(4), 7698–7708. https://doi.org/10.15376/biores.13.4.7698-7708

Campbell, L., Edwards, K., Lemaster, R., & Velarde, G. (2018). The Use of Acoustic Emission to Detect Fines for Wood-Based Composites, Part One: Experimental Setup for Use on Particleboard. BIORESOURCES, 13(4), 8738–8750. https://doi.org/10.15376/biores.13.4.8738-8750

Londono-Zuluaga, C., Du, J., Chang, H.-M., Jameel, H., & Gonzalez, R. (2018). [Review of Lignin Modifications and Perspectives towards Applications of Phenolic Foams: A Review]. BIORESOURCES, 13(4), 9158–9179. https://doi.org/10.15376/biores.13.4.Londono-Zuluaga

Bunds, K. S., Kanters, M. A., Venditti, R. A., Rajagopalan, N., Casper, J. M., & Carlton, T. A. (2018). Organized youth sports and commuting behavior: The environmental impact of decentralized community sport facilities. Transportation Research Part D: Transport and Environment, 65, 387–395. https://doi.org/10.1016/j.trd.2018.08.017

Vidt, M. E., Santago, A. C., II, Marsh, A. P., Hegedus, E. J., Tuohy, C. J., Poehling, G. G., … Saul, K. R. (2018). Modeling a rotator cuff tear: Individualized shoulder muscle forces influence glenohumeral joint contact force predictions. CLINICAL BIOMECHANICS, 60, 20–29. https://doi.org/10.1016/j.clinbiomech.2018.10.004

Alzagameem, A., El Khaldi-Hansen, B., Buechner, D., Larkins, M., Kamm, B., Witzleben, S., & Schulze, M. (2018). Lignocellulosic Biomass as Source for Lignin-Based Environmentally Benign Antioxidants. MOLECULES, 23(10). https://doi.org/10.3390/molecules23102664

Gordeyeva, K., Voisin, H., Hedin, N., Bergström, L., & Lavoine, N. (2018). Lightweight foams of amine-rich organosilica and cellulose nanofibrils by foaming and controlled condensation of aminosilane. Materials Chemistry Frontiers, 2(12), 2220–2229. https://doi.org/10.1039/c8qm00360b

Xie, W., Khan, S., Rojas, O. J., & Parsons, G. N. (2018). Control of Micro- and Mesopores in Carbon Nanofibers and Hollow Carbon Nanofibers Derived from Cellulose Diacetate via Vapor Phase Infiltration of Diethyl Zinc. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 6(11), 13844–13853. https://doi.org/10.1021/acssuschemeng.8b02014

Turgut, A., Tuhin, M. O., Toprakci, O., Pasquinelli, M. A., Spontak, R. J., & Toprakci, H. A. K. (2018). Thermoplastic Elastomer Systems Containing Carbon Nanofibers as Soft Piezoresistive Sensors. ACS OMEGA, 3(10), 12648–12657. https://doi.org/10.1021/acsomega.8b01740

Corbett, D. B., Venditti, R., Jameel, H., & Park, S. (2018). Effect of Mechanical Refining Energy on the Enzymatic Digestibility of Lignocellulosic Biomass. Industrial & Engineering Chemistry Research, 57(43), 14648–14655. https://doi.org/10.1021/acs.iecr.8b02932

Assis, T., Huang, S., Driemeier, C. E., Donohoe, B. S., Kim, C., Kim, S. H., … Park, S. (2018). Toward an understanding of the increase in enzymatic hydrolysis by mechanical refining. BIOTECHNOLOGY FOR BIOFUELS, 11(1). https://doi.org/10.1186/s13068-018-1289-3

Yin, Y., Lou, C., Hubbe, M. A., Tian, X., Jiang, X., Wang, H., & Gao, W. (2018). Synergy of Silane and Polyacrylate Treatments to Prepare Thermally Stable and Hydrophobic Cellulose Nanocrystals. CHEMISTRY LETTERS, 47(10), 1272–1275. https://doi.org/10.1246/cl.180559

Edmunds, C. W., Molina, E. A. R., Andre, N., Hamilton, C., Park, S., Fasina, O., … Labbe, N. (2018). Blended Feedstocks for Thermochemical Conversion: Biomass Characterization and Bio-Oil Production From Switchgrass-Pine Residues Blends. FRONTIERS IN ENERGY RESEARCH, 6. https://doi.org/10.3389/fenrg.2018.00079

Agate, S., Joyce, M., Lucia, L., & Pal, L. (2018). Cellulose and nanocellulose-based flexible-hybrid printed electronics and conductive composites – A review. Carbohydrate Polymers, 198, 249–260. https://doi.org/10.1016/j.carbpol.2018.06.045

Heitman, A. J., Castillo, M. S., Smyth, T. J., & Crozier, C. R. (2018). Stem, Leaf, and Panicle Yield and Nutrient Content of Biomass and Sweet Sorghum. AGRONOMY JOURNAL, 110(5), 1659–1665. https://doi.org/10.2134/agronj2018.03.0178

Lv, P., Zhou, H., Mensah, A., Feng, Q., Wang, D., Hu, X., … al. (2018). A highly flexible self-powered biosensor for glucose detection by epitaxial deposition of gold nanoparticles on conductive bacterial cellulose. CHEMICAL ENGINEERING JOURNAL, 351, 177–188. https://doi.org/10.1016/j.cej.2018.06.098

Li, W., Dou, X., Zhu, C., Wang, J., Chang, H.-min, Jameel, H., & Li, X. (2018). Production of liquefied fuel from depolymerization of kraft lignin over a novel modified nickel/H-beta catalyst. BIORESOURCE TECHNOLOGY, 269, 346–354. https://doi.org/10.1016/j.biortech.2018.08.125

Park, S.-Y., Hong, C.-Y., Kim, S.-H., Choi, J.-H., Kwon, O., Lee, H.-J., & Choi, I.-G. (2018). PHOTODEGRADATION OF NATURAL WOOD VENEER AND STUDIES ON ITS COLOR STABILIZATION FOR AUTOMOTIVE INTERIOR MATERIALS. JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY, 38(4), 301–312. https://doi.org/10.1080/02773813.2018.1488872

Lyu, G., Li, T., Ji, X., Yang, G., Liu, Y., Lucia, L. A., & Chen, J. (2018). Characterization of Lignin Extracted from Willow by Deep Eutectic Solvent Treatments. POLYMERS, 10(8). https://doi.org/10.3390/polym10080869

Kriechbaum, K., Munier, P., Apostolopoulou-Kalkavoura, V., & Lavoine, N. (2018). Analysis of the Porous Architecture and Properties of Anisotropic Nanocellulose Foams: A Novel Approach to Assess the Quality of Cellulose Nanofibrils (CNFs). ACS Sustainable Chemistry & Engineering, 6(9), 11959–11967. https://doi.org/10.1021/acssuschemeng.8b02278

Assis, C. A., Greca, L. G., Ago, M., Balakshin, M. Y., Jameel, H., Gonzalez, R., & Rojas, O. J. (2018). Techno-Economic Assessment, Scalability, and Applications of Aerosol Lignin Micro- and Nanoparticles. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 6(9), 11853–11868. https://doi.org/10.1021/acssuschemeng.8b02151

Ma, Q., Cao, L., Liang, T., Li, J., Lucia, L. A., & Wang, L. (2018). Active Tara Gum/PVA Blend Films with Curcumin-Loaded CTAC Brush-TEMPO-Oxidized Cellulose Nanocrystals. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 6(7), 8926–8934. https://doi.org/10.1021/acssuschemeng.8b01281

Yoo, S., Chung, C.-C., Kelley, S. S., & Park, S. (2018). Graphitization Behavior of Loblolly Pine Wood Investigated by in Situ High Temperature X-ray Diffraction. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 6(7), 9113–9119. https://doi.org/10.1021/acssuschemeng.8b01446

Khakalo, A., Filpponen, I., & Rojas, O. J. (2018). Protein-mediated interfacial adhesion in composites of cellulose nanofibrils and polylactide: Enhanced toughness towards material development. COMPOSITES SCIENCE AND TECHNOLOGY, 160, 145–151. https://doi.org/10.1016/j.compscitech.2018.03.013

Sun, X., DenHartog, E., Zhang, X., & McCord, M. (2018). Study of poly(N-isopropylacrylamide) grafted cotton fabrics initiated by atmospheric pressure plasma. APPLIED SURFACE SCIENCE, 453, 182–191. https://doi.org/10.1016/j.apsusc.2018.05.056

Farhat, W., Venditti, R., Ayoub, A., Prochazka, F., Fernández-de-Alba, C., Mignard, N., … Becquart, F. (2018). Towards thermoplastic hemicellulose: Chemistry and characteristics of poly-(ε-caprolactone) grafting onto hemicellulose backbones. Materials & Design, 153, 298–307. https://doi.org/10.1016/j.matdes.2018.05.013

Sabbaghan, M., & Argyropoulos, D. S. (2018). Synthesis and characterization of nano fibrillated cellulose/Cu2O films; micro and nano particle nucleation effects. CARBOHYDRATE POLYMERS, 197, 614–622. https://doi.org/10.1016/j.carbpol.2018.06.011

Salam, A., Lucia, L., & Jameel, H. (2018). Starch Derivatives that Contribute Significantly to the Bonding and Antibacterial Character of Recycled Fibers. ACS OMEGA, 3(5), 5260–5265. https://doi.org/10.1021/acsomega.8b00307

Yao, Y., Marano, J., Morrow, W. R., III, & Masanet, E. (2018). Quantifying carbon capture potential and cost of carbon capture technology application in the US refining industry. INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL, 74, 87–98. https://doi.org/10.1016/j.ijggc.2018.04.020

Wang, J. P., Matthews, M., Williams, C. M., Shi, R., Yang, C., TunlayaAnukit, S., … Chiang, V. L. (2018). Improving wood properties for wood utilization through multi-omics integration in lignin biosynthesis. Nature Communications, 9(1), 1579. https://doi.org/10.1038/s41467-018-03863-z

Klockars, K. W., Tardy, B. L., Borghei, M., Tripathi, A., Greca, L. G., & Rojas, O. J. (2018). Effect of Anisotropy of Cellulose Nanocrystal Suspensions on Stratification, Domain Structure Formation, and Structural Colors. BIOMACROMOLECULES, 19(7), 2931–2943. https://doi.org/10.1021/acs.biomac.8b00497

Reeb, C., Phillips, R., Venditti, R., Treasure, T., Daystar, J., Gonzalez, R., … Kelley, S. (2018). Techno‐economic analysis of various biochemical conversion platforms for biosugar production: Trade‐offs of co‐producing biopower versus pellets for either a greenfield, repurpose, or co‐location siting context. Biofuels, Bioproducts and Biorefining, 12(3), 390–411. https://doi.org/10.1002/bbb.1847

Saeed, H. A. M., Liu, Y., Lucia, L. A., & Chen, H. (2018). Sudanese Dicots as Alternative Fiber Sources for Pulp and Papermaking. DRVNA INDUSTRIJA, 69(2), 175–182. https://doi.org/10.5552/drind.2018.1748

Zielinski, J., Andreucci, R., Rajagopalan, N., & Aktas, C. B. (2018). Prospects for meeting the corporate average fuel economy standards in the US. RESOURCES CONSERVATION AND RECYCLING, 136, 466–472. https://doi.org/10.1016/j.resconrec.2018.03.026

Lucia, L. (2018). Key elements of green chemistry (2nd ed.). Raleigh: Lucian Lucia.

Ou, L., Kim, H., Kelley, S., & Park, S. (2018). Impacts of feedstock properties on the process economics of fast-pyrolysis biorefineries. BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR, 12(3), 442–452. https://doi.org/10.1002/bbb.1860

Xin, Y., Sun, B., Zhu, X., Yan, Z., Zhao, X., & Sun, X. (2018). Hydrogen production from ethanol solution by pulsed discharge with TiO2 catalysts. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 43(20), 9503–9513. https://doi.org/10.1016/j.ijhydene.2018.04.062

Lv, P. F., Zhou, H. M., Zhao, M., Li, D. W., Lu, K. Y., Wang, D., … al. (2018). Highly flexible, transparent, and conductive silver nanowire-attached bacterial cellulose conductors. CELLULOSE, 25(6), 3189–3196. https://doi.org/10.1007/s10570-018-1773-8

Tyagi, P., Hubbe, M. A., Lucia, L., & Pal, L. (2018). High performance nanocellulose-based composite coatings for oil and grease resistance. Cellulose, 25(6), 3377–3391. https://doi.org/10.1007/s10570-018-1810-7

Joyce, M., Pal, L., Hicks, R., Agate, S., Williams, T. S., Ray, G., & Fleming, P. D. (2018). Custom tailoring of conductive ink/substrate properties for increased thin film deposition of poly(dimethylsiloxane) films. Journal of Materials Science: Materials in Electronics, 29(12), 10461–10470. https://doi.org/10.1007/s10854-018-9108-y

de Assis, C. A., Iglesias, M. C., Bilodeau, M., Johnson, D., Phillips, R., Peresin, M. S., … Gonzalez, R. (2018). Cellulose micro- and nanofibrils (CMNF) manufacturing - financial and risk assessment. Biofuels, Bioproducts and Biorefining, 12(2), 251–264. https://doi.org/10.1002/bbb.1835

Scouse, A., McConnell, E., Kelley, S. S., & Venditti, R. (2018). Analysis of North Carolina Forest Industry Earnings: Adapting Household-Level Data from the American Community Survey to a Social Accounting Matrix. JOURNAL OF FORESTRY, 116(2), 101–108. https://doi.org/10.5849/jof-2017-032

Laleicke, P. F., & Kamke, F. A. (2018). A capacitive multi-wavelength sensor for moisture content gradient sensing in wood. WOOD SCIENCE AND TECHNOLOGY, 52(3), 717–732. https://doi.org/10.1007/s00226-018-0988-z

Lou, R., Lyu, G., Wu, S., Zhang, B., Zhao, H., & Lucia, L. A. (2018). Mechanistic Investigation of Rice Straw Lignin Subunit Bond Cleavages and Subsequent Formation of Monophenols. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 6(1), 430–437. https://doi.org/10.1021/acssuschemeng.7b02688

Yu, C. H., Wang, F., Fu, S. Y., & Lucia, L. (2018). Controlling porosity and density of nanocellulose aerogels for superhydrophobic light materials. TAPPI Journal, 17(3), 145–153. https://doi.org/10.32964/tj17.03.145

Xin, Y., Sun, B., Zhu, X., Yan, Z., Zhao, X., & Sun, X. (2018). Carbon nanoparticles production by pulsed discharge in liquid alcohols. VACUUM, 151, 90–95. https://doi.org/10.1016/j.vacuum.2018.02.006

Laleicke, P. F. (2018). Wood waste, the challenges of communication and innovation. BioResources, 13(2), 2182–2183.

De Assis, T., Reisinger, L. W., Pal, L., Pawlak, J., Jameel, H., & Gonzalez, R. W. (2018). [Review of Understanding the effect of machine technology and cellulosic fibers on tissue properties - a review]. BioResources, 13(2).

Nelson, L., Park, S., & Hubbe, M. A. (2018). [Review of Thermal Depolymerization of Biomass with Emphasis on Gasifier Design and Best Method for Catalytic Hot Gas Conditioning]. BIORESOURCES, 13(2). https://doi.org/10.15376/biores.13.2.nelson

Wang, Q., Yuan, T., Liu, S., Fu, X., Yang, G., Chen, J., … Lucia, L. A. (2018). Synthesizing Magnetic Support for Laccase Immobilization for the Purification of Pre-hydrolysis Liquor. BIORESOURCES, 13(1), 1885–1894. https://doi.org/10.15376/biores.13.1.1885-1894

Kong, F., Guo, Y., Liu, Z., Wang, S., & Lucia, L. A. (2018). Synthesis of Cationic Xylan Derivatives and Application as Strengthening Agents in Papermaking. BIORESOURCES, 13(2), 2960–2976. https://doi.org/10.15376/biores.13.2.2960-2976

Amirsoleimani, M., Khalilzadeh, M. A., Sadeghifar, F., & Sadeghifar, H. (2018). Surface modification of nanosatrch using nano silver: a potential antibacterial for food package coating. JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 55(3), 899–904. https://doi.org/10.1007/s13197-017-2996-7

Jiang, X., Liu, J., Du, X., Hu, Z., Chang, H.-min, & Jameel, H. (2018). Phenolation to Improve Lignin Reactivity toward Thermosets Application. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 6(4), 5504–5512. https://doi.org/10.1021/acssuschemeng.8b00369

Cornelius, C., McCord, M., Bourham, M., & Hauser, P. (2018). Desizing of PVA sized pet/cotton fabrics with atmospheric pressure plasma. CELLULOSE, 25(1), 869–881. https://doi.org/10.1007/s10570-017-1586-1

Hubbe, M. A., Pizzi, A., Zhang, H., & Halis, R. (2018). [Review of Critical Links Governing Performance of Self-binding and Natural Binders for Hot-pressed Reconstituted Lignocellulosic Board without Added Formaldehyde: A Review]. BIORESOURCES, 13(1), 2049–2115. https://doi.org/10.15376/biores.13.1.hubbe

He, L., Han, Q., Jameel, H., Chang, H.-min, Phillips, R., & Wang, Z. (2018). Comparison of One-Stage Batch and Fed-Batch Enzymatic Hydrolysis of Pretreated Hardwood for the Production of Biosugar. APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY, 184(4), 1441–1452. https://doi.org/10.1007/s12010-017-2633-y

Jung, W., Savithri, D., Sharma-Shivappa, R., & Kolar, P. (2018). Changes in Lignin Chemistry of Switchgrass due to Delignification by Sodium Hydroxide Pretreatment. ENERGIES, 11(2). https://doi.org/10.3390/en11020376

Mitchell, P. H. (2018). Calculating the equilibrium moisture content for wood based on humidity measurements. BioResources, 13(1), 171–175.

Xiong, K., Pang, Z., Wang, B., Ji, X., Liu, Y., Yang, G., … Lucia, L. (2018). Biomechanical Pulping of Poplar with Crude Enzyme Secreted from Trametes sp lg-9. BIORESOURCES, 13(2), 3420–3428. https://doi.org/10.15376/biores.13.2.3420-3428

Jang, H. M., Yoo, S., Choi, Y.-K., Park, S., & Kan, E. (2018). Adsorption isotherm, kinetic modeling and mechanism of tetracycline on Pinus taeda-derived activated biochar. BIORESOURCE TECHNOLOGY, 259, 24–31. https://doi.org/10.1016/j.biortech.2018.03.013

Wang, Z., Smyth, T. J., Crozier, C. R., Gehl, R. J., & Heitman, A. J. (2018). Yield and Nitrogen Removal of Bioenergy Grasses as Influenced by Nitrogen Rate and Harvest Management in the Coastal Plain Region of North Carolina. BIOENERGY RESEARCH, 11(1), 44–53. https://doi.org/10.1007/s12155-017-9876-x

Li, S., Xie, W., Wilt, M., Willoughby, J. A., & Rojas, O. J. (2018). Thermally Stable and Tough Coatings and Films Using Vinyl Silylated Lignin. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 6(2), 1988–1998. https://doi.org/10.1021/acssuschemeng.7b03387

Tripathi, A., Parsons, G. N., Khan, S. A., & Rojas, O. J. (2018). Synthesis of organic aerogels with tailorable morphology and strength by controlled solvent swelling following Hansen solubility. SCIENTIFIC REPORTS, 8. https://doi.org/10.1038/s41598-018-19720-4

Yoo, S., Kelley, S. S., Tilotta, D. C., & Park, S. (2018). Structural Characterization of Loblolly Pine Derived Biochar by X-ray Diffraction and Electron Energy Loss Spectroscopy. ACS Sustainable Chemistry & Engineering, 6(2), 2621–2629. https://doi.org/10.1021/ACSSUSCHEMENG.7B04119

Eisa, W. H., Abdelgawad, A. M., & Rojas, O. J. (2018). Solid-State Synthesis of Metal Nanoparticles Supported on Cellulose Nanocrystals and Their Catalytic Activity. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 6(3), 3974–3983. https://doi.org/10.1021/acssuschemeng.7b04333

Naik, P., Wang, J. P., Sederoff, R., Chiang, V., Williams, C., & Ducoste, J. J. (2018). Assessing the impact of the 4CL enzyme complex on the robustness of monolignol biosynthesis using metabolic pathway analysis. PLOS ONE, 13(3). https://doi.org/10.1371/journal.pone.0193896

Sanaeishoar, H., Sabbaghan, M., & Argyropoulos, D. S. (2018). Ultrasound assisted polyacrylamide grafting on nano-fibrillated cellulose. Carbohydrate Polymers, 181, 1071–1077. https://doi.org/10.1016/J.CARBPOL.2017.11.042

Rahmaninia, M., Rohi, M., Hubbe, M. A., Zabihzadeh, S. M., & Ramezani, O. (2018). The performance of chitosan with bentonite microparticles as wet-end additive system for paper reinforcement. CARBOHYDRATE POLYMERS, 179, 328–332. https://doi.org/10.1016/j.carbpol.2017.09.036

Portugal, R. S. E., Lawrence, B., Laleicke, P. F., & Sinha, A. (2018). Technical note: A preliminary study to quantify the environmental impacts of concrete and cork flooring. Wood and Fiber Science, 50(1), 104–112. https://doi.org/10.22382/wfs-2018-011

Estrada-Ruiz, E., Wheeler, E. A., Upchurch, G. R., Jr., & Mack, G. H. (2018). LATE CRETACEOUS ANGIOSPERM WOODS FROM THE MCRAE FORMATION, SOUTH-CENTRAL NEW MEXICO, USA: PART 2. INTERNATIONAL JOURNAL OF PLANT SCIENCES, 179(2), 136–150. https://doi.org/10.1086/695503

Zhang, K., Hong, Y., Wang, N., & Wang, Y. (2018). Flame retardant polyurethane foam prepared from compatible blends of soybean oil-based polyol and phosphorus containing polyol. JOURNAL OF APPLIED POLYMER SCIENCE, 135(5). https://doi.org/10.1002/app.45779

Lopez, J. L., Abt, R. C., Dvorak, W. S., Hodge, G. R., & Phillips, R. (2018). Tree breeding model to assess financial performance of pine hybrids and pure species: deterministic and stochastic approaches for South Africa. NEW FORESTS, 49(1), 123–142. https://doi.org/10.1007/s11056-017-9609-1

Yao, Y., & Masanet, E. (2018). Life-cycle modeling framework for generating energy and greenhouse gas emissions inventory of emerging technologies in the chemical industry. JOURNAL OF CLEANER PRODUCTION, 172, 768–777. https://doi.org/10.1016/j.jclepro.2017.10.125

Yao, Y., Chang, Y., Huang, R., Zhang, L., & Masanet, E. (2018). Environmental implications of the methanol economy in China: well-to-wheel comparison of energy and environmental emissions for different methanol fuel production pathways. JOURNAL OF CLEANER PRODUCTION, 172, 1381–1390. https://doi.org/10.1016/j.jclepro.2017.10.232