Forest Biomaterials

Evaluation of the nip pressure profile and analysis of heat transfer in soft nip calender

Journal of Korea Technical Association of the Pulp and Paper Industry, 32(2), 85–88.

Production and Characterization of Mineral Filled Polypropylene Filaments

Proceedings of ASME Fall Congress 2000, Textile Engineering Division Session.

Testing of biological barrier fabrics

Second international conference on safety & protective fabrics: a technical focus on textile and material development for personal protection. Roseville (MN) : Industrial Fabrics Association International.

Protective textile particle penetration

In R. L. Barker & G. C. Coletta (Eds.), Performance of protective clothing : issues and priorities for the 21st century (Vol. 7).

The relationship between porosity and barrier effectiveness of some shell fabrics used in protective apparel

In C.N. Nelson & N. W. Henry (Eds.), Performance of protective clothing: issues and priorities for the 21st century. Seventh volume (Vol. 7).

Liquid penetration pressures for fabrics tested in compression

In C.N. Nelson & N. W. Henry (Eds.), Performance of protective clothing: issues and priorities for the 21st century. Seventh volume.

Effects of fabric compression on the results of liquid penetration testing

In C.N. Nelson & N. W. Henry (Eds.), Performance of protective clothing: issues and priorities for the 21st century. Seventh volume (Vol. 7). West Conshohocken, PA: ASTM.

Comfort and barrier effectiveness of microporous films and laminates

In C.N. Nelson & N. W. Henry (Eds.), Performance of protective clothing: issues and priorities for the 21st century. Seventh volume.

Surface features of mineral filled polypropylene filaments

In C. M. Pastore & P. Kiekens (Eds.), Surface characteristics of fibers and textiles (pp. 139–160). New York: M. Dekker.

The tensile properties of molding products obtained by the condensation of various tree barks and phenol by using sulfuric acid as a catalyst

Journal of Materials Science Letters, 19(17), 1517–1520.

Fouling of poly[1-(trimethylsilyl)-1-propyne] membranes in pervaporative recovery of butanol from aqueous solutions and ABE fermentation broth

Journal of Membrane Science, 173, 133.

A new technique for the simultaneous, real-time measurement of membrane compaction and performance during exposure to high-pressure gas

Journal of Membrane Science, 171(2), 217–228.

Proton spin-lattice relaxation time measurements of solid wood and its constituents as a function of pH, Part I

Wood Science and Technology, 34, 45–53.

Photoyellowing inhibition of bleached high yield pulps using novel water-soluble UV screens

Photochemistry and Photobiology, 7(2), 141–148.

The thermal stability of novolac-type thermosets made by the condensation of bark and phenol

Polymer Degradation and Stability, 68, 413.

Drying Hardwood Lumber

General Technical Report - Forest Products Laboratory, USDA Forest Service, (-).

Loss of bonding strength dye to drying and repulping of Kraft fibers: Effects of chemical additives

In Y.-C. Su & E. I. C. Wang (Eds.), Proceedings, International Symposium on Environmentally Friendly and Emerging Technologies for a Sustainable Pulp and Paper Industry, Taipei, Taiwan, April 25-27, 2000. Taipei, Taiwan: Taiwan Forestry Research Institute; Taiwan Technical Association of Pulp and Paper Industry.

Synthesis of new trimeric lignin model compounds containing 5-5 ' and beta-O-4 ' substructures, and their characterization by 1D and 2D NMR techniques

Journal of the Brazilian Chemical Society, 11(5), 467–473.

The use of process monitoring techniques on a CNC wood router. Part 1. Sensor selection

Forest Products Journal, 50(7-8), 31–38.

Reversibility of polymer-induced fiber flocculation by shear. 1. Experimental methods

Nordic Pulp & Paper Research Journal, 15(5), 545–553.