Works Published in 2005

search works

copy embed code
Copy Embed Code Experiment

You can embed this resource into your own website. To do so, either use the code generated by us, or use the link and tweak the rest to your preferences. Copy the respective code or link below.

Displaying works 1 - 20 of 83 in total

Sorted by most recent date added to the index first, which may not be the same as publication date order.

2005 conference paper

New Insights into the Similarities between Juvenile Wood and Compression Wood in Loblolly Pine

59th Appita Annual Conference and Exhibition: Incorporating the 13th ISWFPC (International Symposium on Wood, Fibre and Pulping Chemistry). Presented at the 59th Appita Annual Conference and Exhibition: Incorporating the 13th ISWFPC (International Symposium on Wood, Fibre and Pulping Chemistry), Auckland, New Zealand.

By: T. Yeh, B. Goldfarb, H. Chang, I. Peszlen & J. Kadla

Event: 59th Appita Annual Conference and Exhibition: Incorporating the 13th ISWFPC (International Symposium on Wood, Fibre and Pulping Chemistry) at Auckland, New Zealand on May 16-19, 2005

Source: NC State University Libraries
Added: September 2, 2022

2005 conference paper

Methodology Development for Testing the Properties of Wood From Genetically Engineered Aspen

Forest Products Society, 59th International Convention. Presented at the Forest Products Society, 59th International Convention, Quebec City, Canada.

By: X. Xiaoqiang, B. Kasal, P. Peralta & I. Peszlen

Event: Forest Products Society, 59th International Convention at Quebec City, Canada on June 19-22, 2005

Source: NC State University Libraries
Added: September 2, 2022

2005 conference paper

Anatomical Properties of Genetically Engineered Wood from Aspen with Down-regulated Lignin

NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting. Presented at the NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting, Raleigh, NC.

By: I. Peszlen

Event: NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting at Raleigh, NC on October 24-25, 2005

Source: NC State University Libraries
Added: September 2, 2022

2005 conference paper

Relationship between genetic markers and mechanical properties of genetically improved solid wood – testing methodology and preliminary data generation

NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting. Presented at the NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting, Raleigh, NC.

By: B. Kasal, I. Peszlen & P. Peralta

Event: NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting at Raleigh, NC on October 25, 2004

Source: NC State University Libraries
Added: September 2, 2022

2005 conference paper

Preliminary research on Caribbean pine subjected to secondary machining process

Poster presented at the Forest Products Society. FPS 59th International Convention, Quebec City, Quebec, CA.

By: D. Saloni, T. Horn & R. Lemaster

Event: Forest Products Society. FPS 59th International Convention at Quebec City, Quebec, CA

Source: NC State University Libraries
Added: May 27, 2022

2005 conference paper

Lean manufacturing system and implementation analysis in the North Carolina wood industry

Presented at the Forest Products Society. FPS 59th International Convention, Quebec City, Quebec, CA.

By: D. Saloni, U. Buehlmann, A. Cardenas, R. Lemaster & W. Meier

Event: Forest Products Society. FPS 59th International Convention at Quebec City, Quebec, CA

Source: NC State University Libraries
Added: May 27, 2022

2005 conference paper

Lean Manufacturing potential in the American Wood Industry

Presented at the 5th Annual Lean Management Solutions. Institute of Industrial Engineers, Orlando, FL.

By: D. Saloni, R. Lemaster, A. Cardenas., U. Buehlmann & W. Meier

Event: 5th Annual Lean Management Solutions. Institute of Industrial Engineers at Orlando, FL

Source: NC State University Libraries
Added: May 27, 2022

2005 conference paper

Process monitoring applications on abrasive belt loading

Presented at the Forest Products Society. FPS 59th International Convention, Quebec City, CA.

By: D. Saloni & R. Lemaster

Event: Forest Products Society. FPS 59th International Convention at Quebec City, CA

Source: NC State University Libraries
Added: May 27, 2022

2005 conference paper

Machining and abrasion performance of woodfiber plastic composites

Presented at the Forest Products Society. FPS 59th International Convention, Quebec City, Quebec, CA.

By: U. Buehlmann, O. Ndiapi, D. Saloni, R. Lemaster & M. Wolcott

Event: Forest Products Society. FPS 59th International Convention at Quebec City, Quebec, CA

Source: NC State University Libraries
Added: May 27, 2022

2005 conference paper

Influence of woodfiber-plastic material composition on machining and abrasion performance

Presented at the Sixth International Conference on wood-fiber plastic composites, Madison, WI.

By: U. Buehlmann, O. Ndiapi, D. Saloni, R. Lemaster & M. Wolcott

Event: Sixth International Conference on wood-fiber plastic composites at Madison, WI

Source: NC State University Libraries
Added: May 27, 2022

2005 conference paper

Preliminary research on cleaning characterization on abrasive machining process when wood is used

Presented at the Industrial Engineering Research Conference, Atlanta, GA.

By: D. Saloni, R. Lemaster, T. Horn & A. Cardenas

Event: Industrial Engineering Research Conference at Atlanta, GA

Source: NC State University Libraries
Added: May 27, 2022

2005 journal article

The Effects of Heating Without Water Removal and Drying on the Swelling as Measured by Water Retention Value and Degradation as Measured by Intrinsic Viscosity of Cellulose Papermaking Fibers

Progress in Paper Recycling, 14(3), 5–13.

By: E. Welf, R. Venditti, M. Hubbe & J. Pawlak

Sources: NC State University Libraries, ORCID
Added: February 27, 2021

2005 journal article

Evaluation of Various Adhesive Contaminant (Stickies) Analysis Methods: Tracking Stickies Concentrations across Unit Operations of an Old Corrugated Container Recycling Plant

Progress in Paper Recycling, 14(2), 9–19.

By: R. Venditti, H. Chang & K. Copeland

Sources: NC State University Libraries, ORCID
Added: February 27, 2021

2005 conference paper

Dynamic Measurement of Drying Behavior of Cellulose Fibers Using Thermogravimetric Analysis

Proceedings of the 2004 Meeting of the International Association for the Properties of Water and Steam. Japan: IAWPS.

By: H. Jameel, S. Park, R. Venditti & J. Pawlak

Sources: NC State University Libraries, ORCID
Added: February 27, 2021

2005 conference paper

Gypsum-cellulose Interactions-a Colloidal Probe Microscopy Study

59th Appita Annual Conference and Exhibition: Incorporating the 13th ISWFPC (International Symposium on Wood, Fibre and Pulping Chemistry), Auckland, New Zealand: Proceedings, 221–228. Carlton, Victoria, Australia: Appita Inc.

By: J. Bastidas, J. Pawlak, R. Venditti, J. Heitmann, M. Hubbe & J. Kadla

Sources: NC State University Libraries, ORCID
Added: February 27, 2021

2005 conference paper

Measurement of Fiber Hornification using High Resolution Thermogravimetric Analysis

Engineering, Pulping, and Environmental Conference. Presented at the Engineering, Pulping, and Environmental Conference, Philadelphia, PA.

By: S. Park, R. Venditti, H. Jameel & J. Pawlak

Contributors: R. Venditti

Event: Engineering, Pulping, and Environmental Conference at Philadelphia, PA

Sources: NC State University Libraries, ORCID
Added: February 20, 2021

2005 conference paper

Development of a bending stiffness sensor for the automated sorting of recovered paper

Engineering, Pulping, and Environmental Conference. Presented at the Engineering, Pulping, and Environmental Conference, Philadelphia, PA.

By: R. Venditti, M. Ramasubramanian & K. Katuri

Contributors: R. Venditti

Event: Engineering, Pulping, and Environmental Conference at Philadelphia, PA

Sources: NC State University Libraries, ORCID
Added: February 20, 2021

2005 conference paper

Thermogravimetric Analysis of Water Associated with Cellulose Fibers

ANTEC-Conference Proceedings, 8, 330.

By: H. Jameel, S. Park, J. Pawlak & R. Venditti

Sources: NC State University Libraries, ORCID
Added: February 20, 2021

2005 journal article

A Model of the Upper Extremity for Simulating Musculoskeletal Surgery and Analyzing Neuromuscular Control

Annals of Biomedical Engineering, 33(6), 829–840.

By: K. Holzbaur*, W. Murray* & S. Delp*

co-author countries: United States of America 🇺🇸
author keywords: computer simulation; upper limb; muscle; shoulder; elbow; wrist
MeSH headings : Biomechanical Phenomena / methods; Computer Simulation; Humans; Isometric Contraction; Joints / physiology; Models, Anatomic; Muscle Contraction / physiology; Muscle, Skeletal / physiology; Range of Motion, Articular / physiology; Upper Extremity / physiology; Upper Extremity / surgery
Source: Crossref
Added: November 2, 2020

2005 journal article

Probe to the mechanism of desizing of PVA by atmospheric pressure plasma

Journal of Textile Research, 26(6), 5–8.

By: Z. Cai, Y. Qiu & M. McMord

Source: NC State University Libraries
Added: April 11, 2019

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.