Edward P. Fitts Department of Industrial & Systems Engineering - 2004

Palmer, J. A., Jokiel, B., Nordquist, C. D., Kast, B. A., Atwood, C. J., Wicker, R. B., … Livingston, F. J. (2004). Miniature RF components enabled by mesoscale rapid manufacturing. Sandia National Lab.(SNL-NM), Albuquerque, NM (United States).

Dong, J., & Stori, J. A. (2004). A generalized time-optimal Bi-directional scan algorithm for constrained feedrate optimization. American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 15, 725–739. https://doi.org/10.1115/IMECE2004-61365

Dong, J., Yuan, C., Stori, J. A., & Ferreira, P. M. (2004). Development of a high-speed 3-axis machine tool using a novel parallel-kinematics X-Y table. International Journal of Machine Tools  Manufacture, 44(12-13), 1355–1371. https://doi.org/10.1016/j.ijmachtools.2004.04.009

Uzsoy, R. (2004, March). Modelling Capacity in Production and Supply Chain Planning. Presented at the Department of Industrial and Manufacturing Systems Engineering, Pennsylvania State University.

Uzsoy, R. (2004, April). Modelling Capacity in Production and Supply Chain Planning. Presented at the Department of Industrial Engineering and Management Science, Northwestern University, Evanston, Illinois.

Uzsoy, R. (2004, July). Modelling Capacity in Production and Supply Chain Planning. Presented at the Department of Industrial Engineering and Engineering Management, Hong Kong University of Science and Technology.

Uzsoy, R. (2004, April). Transportation, Distribution and Logistics in Indiana. Presented at the Indianapolis Chamber of Commerce.

Uzsoy, R. (2004, May). Center of Excellence in Competitive Global Logistics. Presented at the Advanced Manufacturing Summit, Purdue University.

Uzsoy, R. (2004, September). Supply Chain Survival Strategies: Eat or Be Eaten. Presented at the Lafayette Business Growth Network, Lafayette, IN.

Uzsoy, R. (2004, September). Transportation, Distribution and Logistics in Indiana. Presented at the 2nd Annual Indiana 21st Century Logistics Summit, Indianapolis, IN.

Ren, Y., & Lee, Y.-S. (2004). Explicit Free-form Curve Interpolation and Error Analysis for NC Machining of Complex Surface Models. Computer-Aided Design and Applications, 1(1-4), 243–250. https://doi.org/10.1080/16864360.2004.10738264

Wu, S., & Fang, S. (Eds.). (2004). Optimization and Optimal Control (ICOOC). In Journal of Global Optimization (Vol. 30).

Fang, S., & Lavery, J. E. (2004). Heavy-tailed Non-Gaussian Nature of Terrain and Its Implications for Terrain Modeling by L1 Splines, with J. Proceedings of the 24th Army Science Conference CP-1. Presented at the 24th Army Science Conference.

Birbil, S. I., Fang, S.-C., Frenk, J. B. G., & Zhang, S. (2004). Recursive approximation of the high dimensional max function. Operations Research Letters, 33(5), 450–458. https://doi.org/10.1016/j.orl.2004.11.004

Swann, J. (2004). The Right Price Consultants. Revenue Management and Pricing: Case Studies and Applications, 32–45.

Kulvatunyou, B., Wysk, R. A., Cho, H., & Jones, A. (2004). Integration framework of process planning based on resource independent operation summary to support collaborative manufacturing. International Journal of Computer Integrated Manufacturing, 17(5), 377–393. https://doi.org/10.1080/09511920310001607104

Frank, M. C., Wysk, R. A., & Joshi, S. B. (2004). Rapid planning for CNC milling—A new approach for rapid prototyping. Journal of Manufacturing Systems, 23(3), 242–255. https://doi.org/10.1016/S0278-6125(04)80037-2

Ramakrishnan, S., Wysk, R. A., & Prabhu, V. V. (2004). Prediction of process parameters for intelligent control of tunnel freezers using simulation. Journal of Food Engineering, 65(1), 23–31. https://doi.org/10.1016/j.jfoodeng.2003.05.001

Kay, M. G., & Jain, A. (2004). Pricing a public logistics network. IIE Annual Conference and Exhibition 2004, 439. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-30044432006&partnerID=MN8TOARS

Hodgson, T. J., Melendez, B., Thoney, K. A., & Trainor, T. (2004). The deployment scheduling analysis tool (DSAT). Mathematical and Computer Modelling, 39(6-8), 905–924. https://doi.org/10.1016/s0895-7177(04)90561-4

Wilson, A. D., King, R. E., & Hodgson, T. J. (2004). Scheduling non-similar groups on a flow line: multiple group setups. Robotics and Computer-Integrated Manufacturing, 20(6), 505–515. https://doi.org/10.1016/j.rcim.2004.07.002

Petrie, C., Genesereth, M., Bjornsson, H., Chirkova, R., Ekstrom, M., Gomi, H., … Mohsin, W. (2004). Adding AI to Web Services. In Agent-Mediated Knowledge Management (pp. 322–338). https://doi.org/10.1007/978-3-540-24612-1_23

Kaber, D. B., & Endsley, M. R. (2004). The effects of level of automation and adaptive automation on human performance, situation awareness and workload in a dynamic control task. Theoretical Issues in Ergonomics Science, 5(2), 113–153. https://doi.org/10.1080/1463922021000054335

Stanfield, P. M., Wilson, J. R., & King, R. E. (2004). Flexible modelling of correlated operation times with application in product-reuse facilities. International Journal of Production Research, 42(11), 2179–2196. https://doi.org/10.1080/0020754042000203903

Sun, W., Starly, B., Darling, A., & Gomez, C. (2004). Computer-aided tissue engineering: application to biomimetic modelling and design of tissue scaffolds. Biotechnology and Applied Biochemistry, 39(1), 49. https://doi.org/10.1042/ba20030109

Nam, J., Starly, B., Darling, A., & Sun, W. (2004). Computer Aided Tissue Engineering for Modeling and Design of Novel Tissue Scaffolds. Computer-Aided Design and Applications, 1(1-4), 633–640. https://doi.org/10.1080/16864360.2004.10738308

Sun, W., Darling, A., Starly, B., & Nam, J. (2004). Computer-aided tissue engineering: overview, scope and challenges. Biotechnology and Applied Biochemistry, 39(1), 29. https://doi.org/10.1042/ba20030108

Griffin, S. O., Griffin, P. M., Swann, J. L., & Zlobin, N. (2004). Estimating Rates of New Root Caries in Older Adults. Journal of Dental Research, 83(8), 634–638. https://doi.org/10.1177/154405910408300810

Chan, L. M. A., Shen, Z. J. M., Simchi-Levi, D., & Swann, J. L. (2004). Coordination of Pricing and Inventory Decisions: A Survey and Classification (pp. 335–392). pp. 335–392. https://doi.org/10.1007/978-1-4020-7953-5_9

Cho, E. G. (2004). Scheduling supply chains with batchwise fabric dyeing operations.

Martin, B., Clapp, T. G., & Joines, J. A. (2004). Integrating Ideality with the System Operator Part 1: A Tutorial--Applied to the Bullwhip Effect. TRIZ Journal.

Martin, B. E., Clapp, T. G., & Joines, J. A. (2004). Solving a Real World Inventory Management Problem Using a Technique for Integrating Ideality with the System Operator. Proceedings of the 2004 Triz Conference. Italy.

Donald G. Newnan, T. G. E., & Lavelle, J. P. (2004). Engineering economic analysis. New York: Oxford University Press.

Martin, B., Clapp, T., & Joines, J. A. (2004). Applying Systems Approach and Ideality to the Supply Chain Bullwhip Effect. The TRIZ Journal.

Lada, E. K., J.R.Wilson, N. M. S., & Joines, J. A. (2004). Steady-state simulation analysis using Asap3. Proceedings of the 2004 Winter Simulation Conference: Washington Hilton and Towers, Washington, D.C., U.S.A., December 5-8, 20043, 672–680. New York, N.Y.: Association for Computing Machinery.

Joines, J. A., Thoney, K., King, R. E., & Hodgson, T. (2004). A Simulation-Based Scheduling System and Its Implementation in a Textile Operation. In J. Marin & V. Koncar (Eds.), Proceedings of the 2nd International Industrial Simulation Conference. Malaga, Spain: Ghent, Belgium: EUROSIS-ETI.

Wu, S. Y., & Fang, S. C. (2004). Special issue on the International Conference on Optimization and Optimal Control (ICOOC), June 1-4, 2001 - Foreword. Journal of Global Optimization, 30(03-Feb), 119–120.

Bilgin, A. S., Chirkova, R. Y., Salo, T. J., & Singh, M. P. (2004). Deriving efficient SQL sequences via read-aheads. In Data warehousing and knowledge discovery: 6th international conference, DaWaK 2004, Zaragoza, Spain, September 1-3, 2004 (Vol. 3181, pp. 299–308). https://doi.org/10.1007/978-3-540-30076-2_30

Cheng, H., Fang, S. C., & Lavery, J. E. (2004). An efficient algorithm for generating univariate cubic L-1 splines. COMPUTATIONAL OPTIMIZATION AND APPLICATIONS, 29(2), 219–253. https://doi.org/10.1023/B:COAP.0000042031.03626.1b

Chen, C. L., Kaber, D. B., & Dempsey, P. G. (2004). Using feedforward neural networks and forward selection of input variables for an ergonomics data classification problem. HUMAN FACTORS AND ERGONOMICS IN MANUFACTURING, 14(1), 31–49. https://doi.org/10.1002/hfm.10052

Riley, J. M., Kaber, D. B., & Draper, J. V. (2004). Situation awareness and attention allocation measures for quantifying telepresence experiences in teleoperation. HUMAN FACTORS AND ERGONOMICS IN MANUFACTURING, 14(1), 51–67. https://doi.org/10.1002/hfm.10050

Carrano, A. L., Taylor, J. B., & Lemaster, R. L. (2004). Machining-induced subsurface damage of wood. Forest Products Journal, 54(1), 85–91.

Zhu, W. H., & Lee, Y. S. (2004). Five-axis pencil-cut planning and virtual prototyping with 5-DOF haptic interface. COMPUTER-AIDED DESIGN, 36(13), 1295–1307. https://doi.org/10.1016/j.cad.2004.01.013

Chen, Y., Knappe, D. R. U., & Barlaz, N. A. (2004). Effect of cellulose/hemicellulose and lignin on the bioavailability of toluene sorbed to waste paper. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 38(13), 3731–3736. https://doi.org/10.1021/es035286x

Zhu, W. H., & Lee, Y. S. (2004). Dexel-based force-torque rendering and volume updating for 5-DOF haptic product prototyping and virtual sculpting. COMPUTERS IN INDUSTRY, 55(2), 125–145. https://doi.org/10.1016/j.compind.2004.07.003

Leyman, E. L. C., Mirka, G. A., Kaber, D. B., & Sommerich, C. M. (2004). Cervicobrachial muscle response to cognitive load in a dual-task scenario. ERGONOMICS, 47(6), 625–645. https://doi.org/10.1080/00140130310001629766

Shin, G., & Mirka, G. (2004). The effects of a sloped ground surface on trunk kinematics and L5/S1 moment during lifting. ERGONOMICS, 47(6), 646–659. https://doi.org/10.1080/00140130310001653066

Wilson, A. D., King, R. E., & Hodgson, T. (2004). Scheduling non-similar groups on a flow line: multiple group setups. Robotics and Computer-Integrated Manufacturing, 20(6), 505–515. https://doi.org/10.1016/j.reim.2004.07.002

Schultz, SR, Hodgson, T. J., King, R. E., & Taner, M. R. (2004). Minimizing L-max for the single machine scheduling problem with family set-ups. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 42(20), 4315–4330. https://doi.org/10.1080/00207540410001716561

Tereso, A. P., Araujo, M. M. T., & ElMaghraby, S. E. (2004). Adaptive resource allocation in multimodal activity networks. International Journal of Production Economics, 92(1), 10-.

Zouaoui, F., & Wilson, JR. (2004). Accounting for input-model and input-parameter uncertainties in simulation. IIE TRANSACTIONS, 36(11), 1135–1151. https://doi.org/10.1080/07408170490500708

Chao, X. L., & Luh, H. P. (2004). A stochastic directional convexity result and its application in comparison of queues. QUEUEING SYSTEMS, 48(3-4), 399–419. https://doi.org/10.1023/B:QUES.0000046583.57857.f1

Shin, G., Shu, Y., Li, Z., Jiang, Z. L., & Mirka, G. (2004). Influence of knee angle and individual flexibility on the flexion-relaxation response of the low back musculature. JOURNAL OF ELECTROMYOGRAPHY AND KINESIOLOGY, 14(4), 485–494. https://doi.org/10.1016/j.jelekin.2003.12.001

Harrysson, O. L. A., Robertsson, O., & Nayfeh, J. F. (2004). Higher cumulative revision rate of knee arthroplasties in younger patients with osteoarthritis. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH, (421), 162–168. https://doi.org/10.1097/01.blo.0000127115.05754.ce

Clamann, M., & Kaber, D. B. (2004). Applicability of usability evaluation techniques to aviation systems. INTERNATIONAL JOURNAL OF AVIATION PSYCHOLOGY, 14(4), 395–420. https://doi.org/10.1207/s15327108ijap1404_4

Liao, Y., Fang, S.-C., & L.W. Nuttle, H. (2004). A neural network model with bounded-weights for pattern classification. Computers & Operations Research, 31(9), 1411–1426. https://doi.org/10.1016/S0305-0548(03)00097-2

Govett, P. D., Olby, N. J., Marcellin-Little, D. J., Rotstein, D. S., Reynolds, I. L., & Lewbart, G. A. (2004). Stabilisation of scoliosis in two koi (Cyprinus carpio). VETERINARY RECORD, 155(4), 115–119. https://doi.org/10.1136/vr.155.4.115

Schultz, SR, Hodgson, T. J., King, R. E., & Thoney, K. A. (2004). Minimizing L-max for large-scale, job-shop scheduling problems. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 42(23), 4893–4907. https://doi.org/10.1080/00207540410001721754

Ren, Y. F., Yau, H. T., & Lee, Y. S. (2004). Clean-up tool path generation by contraction tool method for machining complex polyhedral models. COMPUTERS IN INDUSTRY, 54(1), 17–33. https://doi.org/10.1016/j.compind.2003.09.003

Duke, K., Mirka, G. A., & Sommerich, C. M. (2004). Productivity and ergonomic investigation of bent-handle pliers. HUMAN FACTORS, 46(2), 234–243. https://doi.org/10.1518/hfes.46.2.234.37341

Carrano, A. L., Taylor, J. B., Young, R. E., Lemaster, R. L., & Saloni, D. E. (2004). Fuzzy knowledge-based modeling and statistical regression in abrasive wood machining. Forest Products Journal, 54(5), 66–72.

Agrawal, V., Chao, X. L., & Seshadri, S. (2004). Dynamic balancing of inventory in supply chains. European Journal of Operational Research, 159(2), 296–317. https://doi.org/10.1016/j.rjor.2003.08.017

Hodgson, T. J., Jackson, S. D., Qu, P., & Cannon, R. E. (2004). A material allocation scheme for optical fibre cable manufacturing: a case study. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 42(16), 3271–3279. https://doi.org/10.1080/00207540410001688400

Yau, H. T., Chuang, C. M., & Lee, Y. S. (2004). Numerical control machining of triangulated sculptured surfaces in a stereo lithography format with a generalized cutter. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 42(13), 2573–2598. https://doi.org/10.1080/00207540410001671651

Wilson, A. D., King, R. E., & Wilson, J. R. (2004). Case study on statistically estimating minimum makespan for flow line scheduling problems. European Journal of Operational Research, 155(2), 439–454. https://doi.org/10.1016/S0377-2217(02)00910-4

Wardono, B., & Fathi, Y. (2004). A tabu search algorithm for the multi-stage parallel machine problem with limited buffer capacities. EUROPEAN JOURNAL OF OPERATIONAL RESEARCH, 155(2), 380–401. https://doi.org/10.1016/S0377-2217(02)00873-1

Li, W., & Chao, X. L. (2004). Modeling and performance evaluation of a cellular mobile network. IEEE-ACM TRANSACTIONS ON NETWORKING, 12(1), 131–145. https://doi.org/10.1109/TNET.2003.822641

Fang, S. C., Nuttle, H. W. L., & Wang, D. W. (2004). Fuzzy formulation of auctions and optimal sequencing for multiple auctions. FUZZY SETS AND SYSTEMS, 142(3), 421–441. https://doi.org/10.1016/S0165-0114(03)00127-1

Birbil, S. I., Fang, S. C., & Han, J. Y. (2004). An entropic regularization approach for mathematical programs with equilibrium constraints. COMPUTERS & OPERATIONS RESEARCH, 31(13), 2249–2262. https://doi.org/10.1016/S0305-0548(03)00176-X

Fang, S. C., Wu, S. Y., & Sun, J. (2004, February). An analytic center cutting plane method for solving semi-infinite variational inequality problems. JOURNAL OF GLOBAL OPTIMIZATION, Vol. 28, pp. 141–152. https://doi.org/10.1023/B:JOGO.0000015308.49676.ea

Birbil, S. I., Fang, S. C., & Sheu, R. L. (2004, November). On the convergence of a population-based global optimization algorithm. JOURNAL OF GLOBAL OPTIMIZATION, Vol. 30, pp. 301–318. https://doi.org/10.1007/s10898-004-8270-3

Artiba, A., & Elmaghraby, S. E. (2004). IEPM: Focus on scheduling. European Journal of Operational Research, 161(1), 02-.

Hodgson, T., Melendez, B., & Trainor, T. (2004). The  deployment scheduling analysis tool (DSAT). Mathematical and Computer Modelling, 39(08-Jun), 905–924. https://doi.org/10.1016/j.mcm.2004.02.021

Han, J., Huang, Z. H., & Fang, S. C. (2004). Solvability of variational inequality problems. JOURNAL OF OPTIMIZATION THEORY AND APPLICATIONS, 122(3), 501–520. https://doi.org/10.1023/B:JOTA.0000042593.74934.b7

Cormier, D., Harrysson, A., & West, H. (2004). Characterization of H13 steel produced via electron beam melting. RAPID PROTOTYPING JOURNAL, Vol. 10, pp. 35–41. https://doi.org/10.1108/13552540410512516

Morgan, S. D., Fathi, Y., & Taheri, J. (2004). Algorithms for the model configuration problem. IIE TRANSACTIONS, 36(2), 169–180. https://doi.org/10.1080/07408170490245469

Fathi, Y., & Aksakalli, V. (2004). Heuristic methods for gang-rip saw arbor design. EUROPEAN JOURNAL OF OPERATIONAL RESEARCH, 154(3), 626–640. https://doi.org/10.1016/S0377-2217(02)00796-8