Edward P. Fitts Department of Industrial & Systems Engineering - 2006

Livingston, F. J. (2006). Development of an Internet Addressable Pneumatically Controlled Instrument for Applying Stain the Cells In-Vitro (Dissertation). North Carolina State University, Raleigh, NC.

Livingston, F. J. (2006). Development of an Internet Addressable Pneumatically Controlled Instrument for Applying Strain to Cells In-Vitro.

Dong, J., & Stori, J. A. (2006). A generalized time-optimal bidirectional scan algorithm for constrained feed-rate optimization. Journal of Dynamic Systems, Measurement, and Control, 128(2), 379–390. https://doi.org/10.1115/1.2194078

Uzsoy, R., & Ravindran, A. (2006, November). Integrating Production Planning and Safety Stock Determination. Presented at the INFORMS National Meeting, Pittsburgh, PA.

Upasani, A., & Uzsoy, R. (2006, November). Integrated Production Planning and Pricing with Congestion-Prone Production Resources. Presented at the INFORMS National Meeting, Pittsburgh, PA.

Hwang, S., & Uzsoy, R. (2006, November). Multiproduct Dynamic Lot Sizing with Work in Process and Congestion. Presented at the INFORMS National Meeting, Pittsburgh, PA.

Kalafatas, G., Peeta, S., & Uzsoy, R. (2006, November). A Common Modeling Framework for Transportation and Production Planning Problems with Congestion Phenomena. Presented at the INFORMS National Meeting, Pittsburgh, PA.

Sourirajan, K., Ozsen, L., & Uzsoy, R. (2006, November). A Genetic Algorithm for a Single Product Network Design Model with Lead Time and Safety Stock Considerations. Presented at the INFORMS National Meeting, Pittsburgh, PA.

Sourirajan, K., Ozsen, L., & Uzsoy, R. (2006, November). A Multi-Product Break-Bulk Network Design Model with Lead Time and Safety Stock Considerations. Presented at the INFORMS National Meeting, Pittsburgh, PA.

Deshmukh, A., & Uzsoy, R. (2006, February). From Engineering the System to Engineering Information. Presented at the Committee on the Next Decade in Industrial Engineering Workshop, Ann Arbor, MI.

Uzsoy, R., & Velasquez, J. D. (2006, November). Heuristics for Scheduling a Single Machine with Family Dependent Setup Times. Presented at the INFORMS National Meeting, Pittsburgh, PA.

Crist, K., & Uzsoy, R. (2006, November). Scheduling Engineering and Production Lots in Wafer Fabrication. Presented at the INFORMS National Meeting, Pittsburgh, PA.

Mendez, L. I., & Uzsoy, R. (2006, November). Juggling Tasks: Mine, Yours and Ours... Presented at the INFORMS National Meeting, Pittsburgh, PA.

Orcun, S., Uzsoy, R., & Kempf, K. (2006). Using System Dynamics Simulations to Compare Capacity Models for Production Planning. Presented at the 2006 Winter Simulation Conference. https://doi.org/10.1109/wsc.2006.322966

Upasani, A. A., Uzsoy, R., & Sourirajan, K. (2006). A Problem Reduction Approach for Scheduling Semiconductor Wafer Fabrication Facilities. IEEE Transactions on Semiconductor Manufacturing, 19(2), 216–225. https://doi.org/10.1109/tsm.2006.873510

Asmundsson, J., Rardin, R. L., & Uzsoy, R. (2006). Tractable Nonlinear Production Planning Models for Semiconductor Wafer Fabrication Facilities. IEEE Transactions on Semiconductor Manufacturing, 19(1), 95–111. https://doi.org/10.1109/tsm.2005.863214

Ren, Y., Lai-Yuen, S. K., & Lee, Y.-S. (2006). Virtual prototyping and manufacturing planning by using tri-dexel models and haptic force feedback. Virtual and Physical Prototyping, 1(1), 3–18. https://doi.org/10.1080/17452750500283590

Lee, Y.-S., & Chiou, J. C. J. (2006). Swept Tool Envelope and Machining Potential Field for 5-Axis Sculptured Surface Machining. Computer-Aided Design and Applications, 3(6), 751–760. https://doi.org/10.1080/16864360.2006.10738428

Lai-Yuen, S. K., & Lee, Y.-S. (2006). Interactive Computer-Aided Design for Molecular Docking and Assembly. Computer-Aided Design and Applications, 3(6), 701–709. https://doi.org/10.1080/16864360.2006.10738423

Fang, S., Lin, Y.-M., Zhang, Y., & Lavery, J. E. (2006). Computationally Efficient Models of Urban and Natural Terrain by Non-iterative Domain Decomposition for L1 Smoothing Splines. Proceedings of the 25th Army Science Conference. Presented at the 25th Army Science Conference.

Zhang, W., Fang, S., Wang, Y., & Lavery, J. E. (2006). Cubic L1 Splines on Triangulated Irregular Networks. Pacific Journal of Optimization, 2(2), 289–317.

Dai, Y., Chao, X., Fang, S. C., & Nuttle, H. L. W. (2006). Capacity Allocation and Inventory Policy in a Distribution System. Asia-Pacific Journal of Operational Research, 23(04), 543–571. https://doi.org/10.1142/s0217595906001054

Mayorga, M. E., Ahn, H.-S., & Shanthikumar, J. G. (2006). Optimal control of a make-to-stock system with adjustable service rate. Probability in the Engineering and Informational Sciences, 20(4), 609–634. https://doi.org/10.1017/s0269964806060384

Drake, M., Griffin, P., & Swann, J. (2006). Revenue Management for Sports Ticket Packages. Presented at the Manufacturing and Service Operations Management (MSOM) conference, Atlanta, GA.

Nam, C. S., & Thomas, K. (2006). Effects of Cultural Difference and Task Complexity on Team Interaction Process. Journal of the Ergonomics Society of Korea, 25(3), 7–16. https://doi.org/10.5143/jesk.2006.25.3.007

Warsing, D. P., Helmer, E. A., & Blackhurst, J. V. (2006). Strategic safety stock placement in production networks with supply risk. 2006 IIE Annual Conference and Exhibition. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-36448975542&partnerID=MN8TOARS

Shin, D., Wysk, R. A., & Rothrock, L. (2006). A formal control-theoretic model of a human–automation interactive manufacturing system control. International Journal of Production Research, 44(20), 4273–4295. https://doi.org/10.1080/00207540500497074

Patel, D. A., Xu, X., Thomason, A. D., Ransom, S. B., Ivy, J. S., & DeLancey, J. O. L. (2006). Childbirth and pelvic floor dysfunction: An epidemiologic approach to the assessment of prevention opportunities at delivery. American Journal of Obstetrics and Gynecology, 195(1), 23–28. https://doi.org/10.1016/j.ajog.2006.01.042

Kaber, D. B., Wright, M. C., & Sheik-Nainar, M. A. (2006). Investigation of multi-modal interface features for adaptive automation of a human–robot system. International Journal of Human-Computer Studies, 64(6), 527–540. https://doi.org/10.1016/j.ijhcs.2005.11.003

Bucci, M. J., & Kay, M. G. (2006). A modified ALA procedure for logistic network designs with scale economies. 2006 IIE Annual Conference and Exhibition. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84858473880&partnerID=MN8TOARS

Joines, J. A., Thoney, K. A., King, R. E., & Kay, M. G. (2006). Supply chain multi-objective simulation optimization. 4th International Industrial Simulation Conference 2006, ISC 2006, 377–383. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84898422528&partnerID=MN8TOARS

Geiger, C. D., Uzsoy, R., & Aytuğ, H. (2006). Rapid Modeling and Discovery of Priority Dispatching Rules: An Autonomous Learning Approach. Journal of Scheduling, 9(1), 7–34. https://doi.org/10.1007/s10951-006-5591-8

Kaber, D. B., Segall, N., Green, R. S., Entzian, K., & Junginger, S. (2006). Using multiple cognitive task analysis methods for supervisory control interface design in high-throughput biological screening processes. Cognition, Technology & Work, 8(4), 237–252. https://doi.org/10.1007/s10111-006-0029-9

Starly, B., Lau, W., Bradbury, T., & Sun, W. (2006). Internal architecture design and freeform fabrication of tissue replacement structures. Computer-Aided Design, 38(2), 115–124. https://doi.org/10.1016/j.cad.2005.08.001

Piatt, J. H., Jr., Starly, B., Sun, W., & Faerber, E. (2006). Application of computer-assisted design in craniofacial reconstructive surgery using a commercial image guidance system. Journal of Neurosurgery: Pediatrics, 104(1), 64–67. https://doi.org/10.3171/ped.2006.104.1.64

Evans, P. J., Starly, B., & Sun, W. (2006). Computer Aided Tissue Engineering for the Design and Evaluation of Lumbar-Spine Arthroplasty. Computer-Aided Design and Applications, 3(6), 771–778. https://doi.org/10.1080/16864360.2006.10738430

Biller, S., & Swann, J. (2006). Pricing for Environmental Compliance in the Auto Industry. Interfaces, 36(2), 118–125. https://doi.org/10.1287/inte.1050.0174

Garrow, L., Ferguson, M., Keskinocak, P., & Swann, J. (2006). Expert opinions: Current pricing and revenue management practice across U.S. industries. Journal of Revenue and Pricing Management, 5(3), 237–247. https://doi.org/10.1057/palgrave.rpm.5160042

Shirwaiker, R. A., & Okudan, G. E. (2006). TRIZ and axiomatic design: A review of manufacturing case-studies & their compatibility. Portland International Conference on Management of Engineering and Technology, 6, 2510–2520. https://doi.org/10.1109/PICMET.2006.296848

Okudan, G. E., & Shirwaiker, R. A. (2006). A multi-stage problem formulation for concept selection for improved product design. Portland International Conference on Management of Engineering and Technology, 6, 2528–2538. https://doi.org/10.1109/PICMET.2006.296850

Okudan, G. E., Ogot, M., & Shirwaiker, R. (2006). An investigation on the effectiveness of design ideation using TRIZ. Proceedings of the ASME Design Engineering Technical Conference, 2006. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33751337036&partnerID=MN8TOARS

Chan, L. M. A., Simchi-Levi, D., & Swann, J. (2006). Pricing, Production, and Inventory Policies for Manufacturing with Stochastic Demand and Discretionary Sales. Manufacturing & Service Operations Management, 8(2), 149–168. https://doi.org/10.1287/msom.1060.0100

Seastrunk, C. S. (2006). Algorithm to Systematically Reduce Human Errors in Healthcare.

Joines, J. A., Thoney, K., & Kay, M. G. (2006). Supply Chain Multi-Objective Simulation Optimization. Proceedings of the 4th International Industrial Simulation Conference, 125-132, 125–132. Palermo, Italy: Ostend:  EUROSIS-ETI.

Dai, Y., Chao, X., Fang, S.-C., & Nuttle, H. L. W. (2006). Capacity allocation with traditional and Internet channels. NAVAL RESEARCH LOGISTICS, 53(8), 772–787. https://doi.org/10.1002/nav.20168

Thomas, T. M., Marcellin-Little, D. J., Roe, S. C., Lascelles, B. D. X., & Brosey, B. P. (2006). Comparison of measurements obtained by use of an electrogoniometer and a universal plastic goniometer for the assessment of joint motion in dogs. AMERICAN JOURNAL OF VETERINARY RESEARCH, 67(12), 1974–1979. https://doi.org/10.2460/ajvr.67.12.1974

Laoboonlur, P., Hodgson, T., & Thoney, K. A. (2006). Production scheduling in a knitted fabric dyeing and finishing process. Journal of the Textile Institute, 97(5), 391–399. https://doi.org/10.1533/joti.2005.0145

Jiang, Z., Shu, Y., Drum, J., Reid, S., & Mirka, G. A. (2006). Effects of age on muscle activity and upper body kinematics during a repetitive forearm supination task. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 36(11), 951–957. https://doi.org/10.1016/j.ergon.2006.07.008

Chirkova, R., Li, C., & Li, J. (2006). Answering queries using materialized views with minimum size. VLDB JOURNAL, 15(3), 191–210. https://doi.org/10.1007/s00778-005-0162-8

Ji, X., Zhao, X., & Chao, X. (2006). A novel method for multistage scenario generation based on cluster analysis. INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY & DECISION MAKING, 5(3), 513–530. https://doi.org/10.1142/S0219622006002106

Lada, E. K., & Wilson, J. R. (2006). A wavelet-based spectral procedure for steady-state simulation analysis. EUROPEAN JOURNAL OF OPERATIONAL RESEARCH, 174(3), 1769–1801. https://doi.org/10.1016/j.ejor.2005.04.025

Lada, E. K., Steiger, N. M., & Wilson, J. R. (2006). Performance evaluation of recent procedures for steady-state simulation analysis. IIE TRANSACTIONS, 38(9), 711–727. https://doi.org/10.1080/07408170600735520

Palmer, J. A., Jokiel, B., Nordquist, C. D., Kast, B. A., Atwood, C. J., Grant, E., … Wicker, R. B. (2006). Mesoscale RF relay enabled by integrated rapid manufacturing. RAPID PROTOTYPING JOURNAL, 12(3), 148–155. https://doi.org/10.1108/13552540610670726

Joines, S. M. B., Sommerich, C. M., Mirka, G. A., Wilson, J. R., & Moon, S. D. (2006). Low-level exertions of the neck musculature: A study of research methods. Journal of Electromyography and Kinesiology, 16(5), 485–497. https://doi.org/10.1016/j.jelekin.2005.09.007

Chao, X. L., & Zhou, S. X. (2006). [Review of Joint inventory-and-pricing strategy for a stochastic continuous-review system]. IIE TRANSACTIONS, 38(5), 401–408. https://doi.org/10.1080/07408170500371848

Bajaj, K., Mirka, G. A., Sommerich, C. M., & Khachatoorian, H. (2006). Evaluation of a redesigned self-checkout station for wheelchair users. ASSISTIVE TECHNOLOGY, 18(1), 15–24. https://doi.org/10.1080/10400435.2006.10131903

Zhao, Y.-B., Fang, S.-C., & Li, D. (2006). Constructing generalized mean functions using convex functions with regularity conditions. SIAM JOURNAL ON OPTIMIZATION, 17(1), 37–51. https://doi.org/10.1137/040603838

Osmond, C. S., Marcellin-Little, D. J., Harrysson, O. L. A., & Kidd, L. B. (2006). Morphometric assessment of the proximal portion of the tibia in dogs with and without cranial cruciate ligament rupture. VETERINARY RADIOLOGY & ULTRASOUND, 47(2), 136–141. https://doi.org/10.1111/j.1740-8261.2006.00119.x

Walsh, R. A., & Cormier, D. R. (2006). McGraw-Hill machining and metalworking handbook (3rd ed.). New York: McGraw-Hill.

Shin, G., Nance, M. L., & Mirka, G. A. (2006). Differences in trunk kinematics and ground reaction forces between older and younger adults during lifting. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 36(9), 767–772. https://doi.org/10.1016/j.ergon.2006.05.008

Shu, Y., & Mirka, G. A. (2006). A laboratory study of the effects of wrist splint orthoses on forearm muscle activity and upper extremity posture. HUMAN FACTORS, 48(3), 499–510. https://doi.org/10.1518/001872006778606859

Ramachandra, G., & Elmaghraby, S. E. (2006). Sequencing precedence-related jobs on two machines to minimize the weighted completion time. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, 100(1), 44–58. https://doi.org/10.1016/j.ijpe.2004.10.014

Kuhl, M. E., Sumant, S. G., & Wilson, JR. (2006). An automated multiresolution procedure for modeling complex arrival processes. INFORMS JOURNAL ON COMPUTING, 18(1), 3–18. https://doi.org/10.1287/ijoc.1040.0113

Allaoui, H., Artiba, A., Elmaghraby, S. E., & Riane, F. (2006). Scheduling of a two-machine flowshop with availability constraints on the first machine. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, Vol. 99, pp. 16–27. https://doi.org/10.1016/j.ijpe.2004.12.003

Stepnik, M. W., Olby, N., Thompson, R. R., & Marcellin-Little, D. J. (2006). Femoral neuropathy in a dog with iliopsoas muscle injury. VETERINARY SURGERY, 35(2), 186–190. https://doi.org/10.1111/j.1532-950X.2006.00130.X

Lascelles, B. D. X., Roe, S. C., Smith, E., Reynolds, L., Markham, J., Marcellin-Little, D., … Budsberg, S. C. (2006, February). Evaluation of a pressure walkway system for measurement of vertical limb forces in clinically normal dogs. AMERICAN JOURNAL OF VETERINARY RESEARCH, Vol. 67, pp. 277–282. https://doi.org/10.2460/ajvr.67.2.277

Lawrence, B. M., Buckner, G. D., & Mirka, G. A. (2006). An adaptive system identification model of the biomechanical response of the human trunk during sudden loading. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 128(2), 235–241. https://doi.org/10.1115/1.2165696

Afrati, F., Chirkova, R., Gergatsoulis, M., & Pavlaki, V. (2006). Finding equivalent rewritings in the presence of arithmetic comparisons. In Advances in database technology :
EDBT 2006 : 10th International Conference on Extending Database Technology, Munich, Germany, March 26-31, 2006: Proceedings (Lecture notes in computer science; 3896) (Vol. 3896, pp. 942–960). https://doi.org/10.1007/11687238_55

Hildreth, B. E., Marcellin-Little, D. J., Roe, S. C., & Harrysson, O. L. A. (2006, April). In vitro evaluation of five canine tibial plateau leveling methods. AMERICAN JOURNAL OF VETERINARY RESEARCH, Vol. 67, pp. 693–700. https://doi.org/10.2460/ajvr.67.4.693

Ma, R. Q., & Kaber, D. B. (2006). Presence, workload and performance effects of synthetic environment design factors. INTERNATIONAL JOURNAL OF HUMAN-COMPUTER STUDIES, 64(6), 541–552. https://doi.org/10.1016/j.ijhcs.2005.12.003

Kaber, D. B., Perry, C. M., Segall, N., McClernon, C. K., & Prinzel, L. J., III. (2006). Situation awareness implications of adaptive automation for information processing in an air traffic control-related task. International Journal of Industrial Ergonomics, 36(5), 447–462. https://doi.org/10.1016/j.ergon.2006.01.008

Stanfield, P. M., King, R. E., & Hodgson, T. J. (2006). Determining sequence and ready times in a remanufacturing system. IIE TRANSACTIONS, 38(7), 597–607. https://doi.org/10.1080/07408170500371830