Edward P. Fitts Department of Industrial & Systems Engineering - 2008 Subramanian, P., Narendran, T. S., & Karthick, C. (2008). Selection of Third party logistics service provider in inbound logistics of SCM using AHP. 4th International conference on Logistics and Supply Chain Management, PSG college of Technology, Coimbatore. Dong, J., & Ferreira, P. M. (2008). Simultaneous actuation and displacement sensing for electrostatic drives. Journal of Micromechanics and Microengineering, 18(3). https://doi.org/10.1088/0960-1317/18/3/035011 Jeong, Y. H., Dong, J., & Ferreira, P. M. (2008). Self-calibration of dual-actuated single-axis nanopositioners. Measurement Science Technology, 19(4). https://doi.org/10.1088/0957-0233/19/4/045203 Dong, J., Mukhopadhyay, D., Pengwang, E., & Ferreira, P. M. (2008). Parallel-kinematics mems stages for high precision nanopositioning and manipulation. Proceedings of the 23rd Annual Meeting of the American Society for Precision Engineering, ASPE 2008 and the 12th ICPE. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84884962392&partnerID=MN8TOARS Dong, J., Salapaka, S. M., & Ferreira, P. M. (2008). MIMO H control of a parallel kinematic XYZ nano-positioner. ASME International Mechanical Engineering Congress and Exposition, Proceedings, 11 PART A, 145–153. https://doi.org/10.1115/IMECE2007-41868 Jeong, Y. H., Dong, J., & Ferreira, P. P. (2008). Self-calibration of a dual-actuated single-axis nanopositioner using measurement transitivity with extensions to calibration of two-axis systems. In M. T. Postek & J. A. Allgair (Eds.), Instrumentation, Metrology, and Standards for Nanomanufacturing Ii (Vol. 7042). https://doi.org/10.1117/12.796101 Dong, J., Salapaka, S. M., & Ferreira, P. M. (2008). Robust control of a parallel-kinematic nanopositioner. Journal of Dynamic Systems, Measurement, and Control, 130(4), 0410071–04100715. https://doi.org/10.1115/1.2936861 Mukhopadhyay, D., Dong, J., Ferreira, P. M., Maher, M. A., Chiao, J. C., & Resnick, P. J. (2008). Parallel kinematic mechanism based monolithic XY micro-positioning stage with rotary comb drive actuators - art. no. 688209. In Micromachining and Microfabrication Process Technology Xiii (Vol. 6882, p. 88209). https://doi.org/10.1117/12.762358 Dong, J., Salapaka, S. M., Ferreira, P. M., & ASME. (2008). MIMO H-infinity control of a parallel kinematic XYZ nano-positioner. International Mechanical Engineering Congress and Exposition 2007, Vol 11 Pt a and Pt B: Micro and Nano Systems, 145–153. Bristow, D. A., Dong, J., Alleyne, A. G., Ferreira, P., & Salapaka, S. (2008). High bandwidth control of precision motion instrumentation. Review of Scientific Instruments, 79(10). https://doi.org/10.1063/1.2980377 Helfrich, B. E., Lee, C., Bristow, D. A., Xiao, X. H., Dong, J., Alleyne, A. G., … IEEE. (2008). Combined H-infinity-feedback and Iterative Learning Control design with application to nanopositioning systems. In 2008 American Control Conference, Vols 1-12 (pp. 3893–3900). https://doi.org/10.1109/ACC.2008.4587101 Yao, Q., Dong, J., & Ferreira, P. M. (2008). A novel parallel-kinematics mechanisms for integrated, multi-axis nanopositioning - Part 1. Kinematics and design for fabrication. Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology, 32(1), 7–19. https://doi.org/10.1016/j.precisioneng.2007.03.001 Dong, J., Yao, Q., & Ferreira, P. M. (2008). A novel parallel-kinematics mechanism for integrated, multi-axis nanopositioning - Part 2: Dynamics, control and performance analysis. Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology, 32(1), 20–33. https://doi.org/10.1016/j.precisioneng.2007.03.002 Mukhopadhyay, D., Dong, J., Pengwang, E., & Ferreira, P. (2008). A SOI-MEMS-based 3-DOF planar parallel-kinematics nanopositioning stage. Sensors and Actuators a-Physical, 147(1), 340–351. https://doi.org/10.1016/j.sna.2008.04.018 Orcun, S., Kempf, K. G., & Uzsoy, R. (2008, June). An Integrated Production Planning Model with Load-Dependent Lead Times and Safety Stocks. Presented at the Foundations of Computer-Aided Process Operations, Cambridge, MA. Kefeli, A., Uzsoy, R., Fathi, Y., & Kay, M. (2008, March 3). Using a Mathematical Programming Model to Examine the Marginal Prices of Capacitated Resources. Presented at the 13th International Working Seminar on Production Economics, Innsbruck, Austria. Uzsoy, R. (2008, October). New Directions in Production Planning: A Tutorial. Presented at the XIV International Conference on Industrial Engineering and Operations Management, Rio de Janeiro, Brazil. Godinho Filho, M., & Uzsoy, R. (2008, May). Combining System Dynamics and Factory Physics to Study the Effects of Continuous Improvement on the Operating Curve. Presented at the Industrial Engineering Research Conference, Vancouver, BC. Li, P., Zhang, X., & Fang, S. (2008). Nonlinear Optimization Subject to A System of Fuzzy Relational Equations with Max-min Composition. Proceedings of 7th International Symposium on Operations Research and Its Applications (ISORA), 1–9. Lada, E. K., Steiger, N. M., & Wilson, J. R. (2008). SBatch: A spaced batch means procedure for steady-state simulation analysis. Journal of Simulation, 2(3), 170–185. https://doi.org/10.1057/jos.2008.11 Fang, S.-C., Y. Gao, D., Sheu, R.-L., & Wu, S.-Y. (2008). Canonical dual approach to solving 0-1 quadratic programming problems. Journal of Industrial & Management Optimization, 4(1), 125–142. https://doi.org/10.3934/jimo.2008.4.125 Caliskan Demirag, O., Keskinocak, P., & Swann, J. (2008). Customer Rebates and Retailer Incentives in the Presence of Competition. Presented at the MSOM conference, College Park, MD. Duran, S., Phumchusri, N., & Swann, J. (2008). Analysis of Coordinated Stochastic Systems Based on Operational Policies of Animal Shelters. Presented at the MSOM conference, College Park, MD. Borenstein, J., Drake, M., Griffin, P., & Swann, J. (2008). The Test of Ethical Sensitivity in Science and Engineering (TESSE): A Discipline-Specific Assessment Tool for Awareness of Ethical Issues. Presented at the ASEE conference, Pittsburgh, PA. Drake, M., Griffin, P., & Swann, J. (2008). Keeping Logistics Under Wraps: A Case Study. Presented at the Supply Chain Management Educators’ Conference by CSCMP, Denver, CO. Arumugam, R., Mayorga, M. E., & Taaffe, K. M. (2008). Inventory based allocation policies for flexible servers in serial systems. Annals of Operations Research, 172(1), 1–23. https://doi.org/10.1007/s10479-008-0465-4 Kaber, D. B. (2008). Book review. Theoretical Issues in Ergonomics Science, 9(3), 269–271. https://doi.org/10.1080/14639220600956464 Steele, J. W., Wysk, R. A., & Ferreira, J. C. E. (2008). A resource-oriented tolerance representation scheme for the planning of robotic machine tending operations in automated manufacturing systems. The International Journal of Advanced Manufacturing Technology, 38(7-8), 741–756. https://doi.org/10.1007/S00170-007-1118-5 Warsing, D. P. (2008). Supply chain management. In Operations Research Applications (pp. 8–1-8–64). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85056984750&partnerID=MN8TOARS Sorenson, G. E., & Lavelle, J. P. (2008). A Comparison of Fuzzy Set and Probabilistic Paradigms for Ranking Vague Economic Investment Information Using a Present Worth Criterion. The Engineering Economist, 53(1), 42–67. https://doi.org/10.1080/00137910701854594 Nam, C. S., Shu, J., & Chung, D. (2008). The roles of sensory modalities in collaborative virtual environments (CVEs). Computers in Human Behavior, 24(4), 1404–1417. https://doi.org/10.1016/j.chb.2007.07.014 Seong, Y., & Nam, C. S. (2008). Capturing judgment policy on customers’ creditworthiness: A lens model and SDT approach. International Journal of Industrial Ergonomics, 38(7-8), 593–600. https://doi.org/10.1016/j.ergon.2008.01.018 Ling, X., Kay, M. G., & Telford, J. (2008). Waiting time approximation in public logistics network. IIE Annual Conference and Expo 2008, 543–548. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-63849088736&partnerID=MN8TOARS Upasani, A., & Uzsoy, R. (2008). Integrating a decomposition procedure with problem reduction for factory scheduling with disruptions: a simulation study. International Journal of Production Research, 46(21), 5883–5905. https://doi.org/10.1080/00207540601156215 Geiger, C. D., & Uzsoy, R. (2008). Learning effective dispatching rules for batch processor scheduling. International Journal of Production Research, 46(6), 1431–1454. https://doi.org/10.1080/00207540600993360 Uzsoy, R., & Velásquez, J. D. (2008). Heuristics for minimizing maximum lateness on a single machine with family-dependent set-up times. Computers & Operations Research, 35(6), 2018–2033. https://doi.org/10.1016/j.cor.2006.10.003 Ekici, A., Keskinocak, P., & Swann, J. L. (2008). Pandemic influenza response. 2008 Winter Simulation Conference. Presented at the 2008 Winter Simulation Conference (WSC). https://doi.org/10.1109/wsc.2008.4736242 Shirwaiker, R. A., & Okudan, G. E. (2008). Triz and axiomatic design: A review of case-studies and a proposed synergistic use. Journal of Intelligent Manufacturing, 19(1), 33–47. https://doi.org/10.1007/s10845-007-0044-6 Faissol, D. M., Griffin, P. M., & Swann, J. L. (2008). A Response. JAIDS Journal of Acquired Immune Deficiency Syndromes, 47(2), 266. https://doi.org/10.1097/qai.0b013e31815e92ac Drake, M. J., Duran, S., Griffin, P. M., & Swann, J. L. (2008). Optimal timing of switches between product sales for sports and entertainment tickets. Naval Research Logistics, 55(1), 59–75. https://doi.org/10.1002/nav.20266 Griffin, P. M., Scherrer, C. R., & Swann, J. L. (2008). Optimization of community health center locations and service offerings with statistical need estimation. IIE Transactions, 40(9), 880–892. https://doi.org/10.1080/07408170802165864 Duran, S., Liu, T., Simchi-Levi, D., & Swann, J. L. (2008). Policies utilizing tactical inventory for service-differentiated customers. Operations Research Letters, 36(2), 259–264. https://doi.org/10.1016/j.orl.2007.05.013 Wagoner, A. G., & others. (2008). Plant floor scheduling systems in A lean environment. Rouskas, G. N., Boullard, L., Craig, A. E., Joines, J., Miller, C., Miller, T. K., … Wiebe, E. (2008). Computing Across Curricula. ASEE Annual Conference & Exposition. Presented at the Citeseer. Daley, C. M. (2008). Application of data mining tools for exploring data: Yarn quality case study. Craig, A. (2008). AC 2008-740: COMPUTING ACROSS CURRICULA. age, 13, 1. Raubenheimer, D. (2008). AC 2008-1062: INTEGRATION OF COMPUTER BASED PROBLEM SOLVING INTO ENGINEERING CURRICULA. age, 13, 1. Cusher, A. A., & others. (2008). A design and analysis approach for drag reduction on aircraft with adaptive lifting surfaces. Joines, J. A. (2008, December 5). Simulation and Lean Six Sigma: Part 2 Defining the Role of Simulation, Success in Simulation. Retrieved from simio.biz website: http://simio.biz/blog/2008/12/ Joines, J. A. (2008, November 30). Simulation and Lean Six Sigma: Part 1 Defining Six Sigma, Success in Simulation. Retrieved from simio.biz website: http://www.simio.biz/blog/2008/11/30/ Purser, M., Cormier, D., Buckner, G., Cook, R., & Bolotin, G. (2008). Annuloplasty band with shape memory alloy stiffener. Medical Device Materials IV, 231–236. Tafazzoli, A., Wilson, J. R., Lada, E. K., & Steiger, N. M. (2008). SKART: A SKEWNESS- AND AUTOREGRESSION-ADJUSTED BATCH-MEANS PROCEDURE FOR SIMULATION ANALYSIS. 2008 WINTER SIMULATION CONFERENCE, VOLS 1-5, pp. 387-+. https://doi.org/10.1109/wsc.2008.4736092 Yaesoubi, R., & Roberts, S. D. (2008). HOW MUCH IS A HEALTH INSURER WILLING TO PAY FOR COLORECTAL CANCER SCREENING TESTS? 2008 WINTER SIMULATION CONFERENCE, VOLS 1-5, pp. 1624–1631. https://doi.org/10.1109/wsc.2008.4736246 Iser, J. H., Denton, B. T., & King, R. E. (2008). HEURISTICS FOR BALANCING OPERATING ROOM AND POST-ANESTHESIA RESOURCES UNDER UNCERTAINTY. 2008 WINTER SIMULATION CONFERENCE, VOLS 1-5, pp. 1601–1608. https://doi.org/10.1109/wsc.2008.4736243 Irdem, D. F., Kacar, N. B., & Uzsoy, R. (2008). An Experimental study of an iterative simulation-optimization algorithm for production planning. 2008 Winter Simulation Conference, vols 1-5, 2176–2184. Vila-Parrish, A. R., Ivy, J. S., & King, R. E. (2008). A SIMULATION-BASED APPROACH FOR INVENTORY MODELING OF PERISHABLE PHARMACEUTICALS. 2008 WINTER SIMULATION CONFERENCE, VOLS 1-5, pp. 1532–1538. https://doi.org/10.1109/wsc.2008.4736234 Joines, J. A., Gupta, D., Gocke, A., King, R. E., & Kay, M. G. (2008). Supply chain multi-objective simulation optimization. Proceedings of the 2002 Winter Simulation Conference: Manchester Grand Hyatt San Diego, San Diego, CA, U.S.A., December 8-11, 2002, 1306–1314. https://doi.org/10.1109/wsc.2002.1166395 Lada, E. K., Wilson, J. R., Steiger, N. M., & A., J. J. (2008). Performance evaluation of a wavelet-based spectral method for steady-state simulation analysis. Proceedings of the 2004 Winter Simulation Conference: Washington Hilton and Towers, Washington, D.C., U.S.A., December 5-8, 20043, 694–702. New York, N.Y.: Association for Computing Machinery. Brent, R., Craig, A., Joines, J. A., & Raubenheimer, D. (2008). Integration of Computer Based Problem Solving Into Engineering Curricula. Proceedings of the ASEE International Conference. Retrieved from http://papers.asee.org/conferences/paper-view.cfm?id=7743 Craig, A., Joines, J. A., Miller, C., & Rouskas, R. (2008). Computing across curricula. 2008 ASEE annual conference & exposition: June 22-25, 2008. Washington, DC: American Society for Engineering Education. Joines, J. A., Roberts, S., & Raubenheimer, D. (2008). Computer-based modeling for engineers using Excel and VBA. 2008 ASEE annual conference & exposition: June 22-25, 2008. Washington, DC: American Society for Engineering Education. Maillart, L. M., Ivy, J. S., Ransom, S., & Diehl, K. (2008). Assessing Dynamic Breast Cancer Screening Policies. OPERATIONS RESEARCH, 56(6), 1411–1427. https://doi.org/10.1287/opre.1080.0614 Zhang, T., Zhu, B., Lee, L., & Kaber, D. (2008). Service Robot Anthropomorphism and Interface Design for Emotion in Human-Robot Interaction. 2008 IEEE INTERNATIONAL CONFERENCE ON AUTOMATION SCIENCE AND ENGINEERING, VOLS 1 AND 2, pp. 674–679. https://doi.org/10.1109/coase.2008.4626532 Kaber, D. B., Alexander, A. L., Stelzer, E. M., Kim, S.-H., Kaufmann, K., & Hsiang, S. (2008). Perceived Clutter in Advanced Cockpit Displays: Measurement and Modeling with Experienced Pilots. AVIATION SPACE AND ENVIRONMENTAL MEDICINE, 79(11), 1007–1018. https://doi.org/10.3357/ASEM.2319.2008 Samayoa, M. J., Haque, M. A., & Cohen, P. H. (2008). Focused ion beam irradiation effects on nanoscale freestanding thin films. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 18(9). https://doi.org/10.1088/0960-1317/18/9/095005 Sawaya, S. G., Combet, D., Chanoit, G., Thiebault, J. J., Levine, D., & Marcellin-Little, D. J. (2008). Assessment of impulse duration thresholds for electrical stimulation of muscles (chronaxy) in dogs. American Journal of Veterinary Research, 69(10), 1305–1309. https://doi.org/10.2460/ajvr.69.10.1305 Li, P., & Fang, S.-C. (2008). [Review of On the resolution and optimization of a system of fuzzy relational equations with sup-T composition]. FUZZY OPTIMIZATION AND DECISION MAKING, 7(2), 169–214. https://doi.org/10.1007/s10700-008-9029-y Kucera, K. L., Mirka, G. A., Loomis, D., Marshall, S. W., Lipscomb, H. J., & Daniels, J. (2008). Evaluating ergonomic stresses in North Carolina commercial crab pot and gill net fishermen. JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE, 5(3), 182–196. https://doi.org/10.1080/15459620701873514 Kim, S., & Uzsoy, R. (2008). Exact and heuristic procedures for capacity expansion problems with congestion. IIE TRANSACTIONS, 40(12), 1185–1197. https://doi.org/10.1080/07408170802322978 Zhang, L. S., Fang, S. C., & Wang, Y. (2008). A new tunnel function method for global optimization. Pacific Journal of Optimization, 4(1), 125–138. Cansizoglu, O., Harrysson, O., Cormier, D., West, H., & Mahale, T. (2008). Properties of Ti-6Al-4V non-stochastic lattice structures fabricated via electron beam melting. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 492(1-2), 468–474. https://doi.org/10.1016/j.msea.2008.04.002 Kim, S., & Uzsoy, R. M. (2008). Integrated planning of production and engineering process improvement. IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 21(3), 390–398. https://doi.org/10.1109/TSM.2008.2001215 McCormack, K., Ladeira, M. B., & De Oliveira, M. P. V. (2008). Supply chain maturity and performance in Brazil. Supply Chain Management, 13(4), 272–282. https://doi.org/10.1108/13598540810882161 Dai, Y., Fang, S.-C., Ling, X., & Nuttle, H. L. W. (2008, June). Risk pooling strategy in a multi-echelon supply chain with price-sensitive demand. MATHEMATICAL METHODS OF OPERATIONS RESEARCH, Vol. 67, pp. 391–421. https://doi.org/10.1007/s00186-007-0203-8 Marcellin-Little, D. J., Harrysson, O. L. A., & Cansizoglu, O. (2008). In vitro evaluation of a custom cutting jig and custom plate for canine tibial plateau leveling. AMERICAN JOURNAL OF VETERINARY RESEARCH, 69(7), 961–966. https://doi.org/10.2460/ajvr.69.7.961 Lipscomb, H. J., Nolan, J., Patterson, D., Makrozahopoulos, D., Kucera, K. L., & Dement, J. M. (2008). How much time is safety worth? A comparison of trigger configurations on pneumatic nail guns in residential framing. PUBLIC HEALTH REPORTS, 123(4), 481–486. https://doi.org/10.1177/003335490812300409 Yoder, J. A., Cannon, J. P., Litman, R. T., Murphy, C., Freeman, J. L., & Litman, G. W. (2008). Evidence for a transposition event in a second NITR gene cluster in zebrafish. IMMUNOGENETICS, 60(5), 257–265. https://doi.org/10.1007/s00251-008-0285-3 Harrysson, O. L. A., CansiZoglu, O., Marcellin-Little, D. J., Cormier, D. R., & West, H. A., II. (2008, April 1). Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology. MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, Vol. 28, pp. 366–373. https://doi.org/10.1016/j.msec.2007.04.022 Gupta, D., & Denton, B. (2008). Appointment scheduling in health care: Challenges and opportunities. IIE TRANSACTIONS, 40(9), 800–819. https://doi.org/10.1080/07408170802165880 Denton, B., & Sodhi, M. M. S. (2008). Introduction: 2007 Franz Edelman Award for Achievement in Operations Research and the Management Sciences. INTERFACES, Vol. 38, pp. 2–4. https://doi.org/10.1287/inte.1070.0338 Fang, S. C., Gao, D. Y., Sheu, R. L., & Wu, S. Y. (2008). Canonical dual approach to solving 0-1 quadratic programming problems. Journal of Industrial and Management Optimization, 4(1), 124–142. Aman, R. L., West, H. A., & Cormier, D. R. (2008). An evaluation of loose tenon joint strength. Forest Products Journal, 58(3), 61–64. Denton, B. T. (2008). Simulation of a virtual campus at the Open University of Catalonia. INTERFACES, Vol. 38, pp. 147–149. https://doi.org/10.1287/inte.1070.0321 Upasani, A., & Uzsoy, R. (2008). [Review of Incorporating manufacturing lead times in joint production-marketing models: A review and some future directions]. Annals of Operations Research, 161(1), 171–188. Designing better engineering education through assessment: A practical resource for faculty and department chairs on using assessment and ABET criteria to improve student learning. (2008). Sterling, VA: Stylus Pub. Morgan, S. D., & Fathi, Y. (2008, September 16). Algorithms for the q-model clustering problem with application in switching cabinet manufacturing. EUROPEAN JOURNAL OF OPERATIONAL RESEARCH, Vol. 189, pp. 939–951. https://doi.org/10.1016/j.ejor.2007.02.060 Sourirajan, K., Ozsen, L., & Uzsoy, R. (2008). A single product network design model with lead time and safety stock considerations (vol 39, pg 411, 2007). IIE Transactions, Vol. 40, pp. 795–797. Wang, Z. B., Fang, S. C., Gao, D. Y., & Xing, W. X. (2008). Global extremal conditions for multi-integer quadratic programming. Journal of Industrial and Management Optimization, 4(2), 213–225. Cansizoglu, O., Harrysson, O. L. A., West, H. A., II, Cormier, D. R., & Mahale, T. (2008). Applications of structural optimization in direct metal fabrication. RAPID PROTOTYPING JOURNAL, 14(2), 114–122. https://doi.org/10.1108/13552540810862082 Xu, X., Mirka, G. A., & Hsiang, S. M. (2008). The effects of obesity on lifting performance. APPLIED ERGONOMICS, 39(1), 93–98. https://doi.org/10.1016/j.apergo.2007.02.001 Alexopoulos, C., Goldsman, D., Fontanesi, J., Kopald, D., & Wilson, J. R. (2008, February). Modeling patient arrivals in community clinics. OMEGA-INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE, Vol. 36, pp. 33–43. https://doi.org/10.1016/j.omega.2005.07.013 Karabelchtchikova, O., Riuero, I. V., & Hsiang, S. M. (2008). Modeling of residual stress distribution in D2 steel via grinding dynamics using a second-order damping system. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 198(1-3), 313–322. https://doi.org/10.1016/j.jmatprotec.2007.07.006 Spurlin, J., Rajala, S., & Lavelle, J. (2008). Assessing student learning: ensuring undergraduate students are learning what we want them to learn. In Designing better engineering education through assessment: A practical resource for faculty and department chairs on using assessment and ABET criteria to improve student learning. Sterling, Va: Stylus Publishing. Chiu, N.-C., Fang, S.-C., Lavery, J. E., Lin, J.-Y., & Wang, Y. (2008). Approximating term structure of interest rates using cubic L-1 splines. EUROPEAN JOURNAL OF OPERATIONAL RESEARCH, 184(3), 990–1004. https://doi.org/10.1016/j.ejor.2006.12.008 Zhao, Y. B., Fang, S.-C., & Lavery, J. E. (2008, April). Geometric dual formulation for first-derivative-based univariate cubic L-1 splines. JOURNAL OF GLOBAL OPTIMIZATION, Vol. 40, pp. 589–621. https://doi.org/10.1007/s10898-006-9124-y Roberts, S., Wang, L., Klein, R., Ness, R., & Dittus, R. (2008). Development of a simulation model of colorectal cancer. ACM TRANSACTIONS ON MODELING AND COMPUTER SIMULATION, 18(1). https://doi.org/10.1145/1315575.1315579 Li, P., & Liu, B. (2008). Entropy of credibility distributions for fuzzy variables. IEEE TRANSACTIONS ON FUZZY SYSTEMS, 16(1), 123–129. https://doi.org/10.1109/TFUZZ.2007.894975 Lascelles, B. D. X., Gaynor, J. S., Smith, E. S., Roe, S. C., Marcellin-Little, D. J., Davidson, G., … Carr, J. (2008). Amantadine in a multimodal analgesic regimen for alleviation of refractory osteoarthritis pain in dogs. JOURNAL OF VETERINARY INTERNAL MEDICINE, 22(1), 53–59. https://doi.org/10.1111/j.1939-1676.2007.0014.x Xu, X., Hsiang, S. M., & Mirka, G. A. (2008). Coordination indices between lifting kinematics and kinetics. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 38(11-12), 1062–1066. https://doi.org/10.1016/j.ergon.2008.02.008