Edward P. Fitts Department of Industrial & Systems Engineering - 2001

Asmundsson, J., Orcun, S., Rardin, R. L., & Uzsoy, R. (2001, February). Compact Nonlinear Capacity Models for Supply Chains. Presented at the Research Conference on Management in the Information Economy, Anderson School of Business, University of California-Los Angeles.

Uzsoy, R. (2001, December). From Finite Capacity to Supply Chain Management. Presented at the School of Industrial and Operations Engineering, University of Michigan.

Aytug, H., Lawley, M. A., Mohan, S., & Uzsoy, R. (2001). Executing Production Schedules In The Face Of Uncertainties: A Brief Review And Some Future Directions. Proceedings of the Conference on Industrial Engineering and Production Management. Presented at the Conference on Industrial Engineering and Production Management, Quebec City, Quebec, Canada.

Musselman, K., & Uzsoy, R. (2001). Advanced Planning and Scheduling for Manufacturing. In G. Salvendy (Ed.), Handbook of Industrial Engineering. John Wiley.

Rardin, R. L., & Uzsoy, R. (2001). Experimental Evaluation of Heuristic Optimization Algorithms: A Tutorial. Journal of Heuristics, 7(3), 261–304. https://doi.org/10.1023/a:1011319115230

Akcalt, E., Davis, M., Hamlin, R. D., McCullough, T., Teyner, T., & Uzsoy, R. (2001). A decision support system for spare parts management in a wafer fabrication facility. IEEE Transactions on Semiconductor Manufacturing, 14(1), 76–78. https://doi.org/10.1109/66.909657

Akcalt, E., Nemoto, K., & Uzsoy, R. (2001). Cycle-time improvements for photolithography process in semiconductor manufacturing. IEEE Transactions on Semiconductor Manufacturing, 14(1), 48–56. https://doi.org/10.1109/66.909654

Horiguchi, K., Raghavan, N., Uzsoy, R., & Venkateswaran, S. (2001). Finite-capacity production planning algorithms for a semiconductor wafer fabrication facility. International Journal of Production Research, 39(5), 825–842. https://doi.org/10.1080/00207540010010253

Fang, S. (2001). On Fuzzy Sets, Habitual Domains, Variational Inequalities, and Optimization [R.J. Reynolds Lecture Notes, Engineering Publications]. Raleigh, NC: NC State University.

Fang, S. C., Lee, Y.-S., & Chiu, N. (2001). Optimal Planning and Sequencing of Parallel Machining Operations. In Handbook of Computational Intelligence in Design and Manufacturing (pp. 8–1-8–13). Boca Raton, FL: CRC Press.

Fang, S., & Tsao, H.-S. J. (2001). Maximum Entropy Principle: Image Reconstruction. In Encyclopedia of Optimization (Vol. 3, pp. 245–249). https://doi.org/10.1007/0-306-48332-7_274

Fang, S., & Tsao, H.-S. J. (2001). Entropy Optimization: Shannon Measure of entropy and its properties. In Encyclopedia of Optimization (Vol. 2, pp. 12–18). https://doi.org/10.1007/0-306-48332-7_119

Fang, S., & Scott, C. (Eds.). (2001). Geometric Programming. In Annals of Operations Research (Vol. 105).

Wu, S.-Y., Fang, S.-C., & Lin, C.-J. (2001). Analytic Center Based Cutting Plane Method for Linear Semi-Infinite Programming. In M. A. Goberna & M. A. Lopez (Eds.), Semi-Infinite Programming. Nonconvex Optimization and Its Applications (pp. 221–233). https://doi.org/10.1007/978-1-4757-3403-4_10

Warsing, D. P., Souza, G. C., & Greis, N. P. (2001). Determining the value of dedicated multimodal cargo facilities in a multi-region distribution network. European Journal of Operational Research, 133(1), 81–93. https://doi.org/10.1016/S0377-2217(00)00185-5

Pan, R., Wysk, R. A., & Chandra, M. J. (2001). A Statistical Approach to Process Planning. Journal of Design and Manufacturing Automation, 4(1), 37–46. https://doi.org/10.1080/15320370108500215

Nelson, B. L., Swann, J., Goldsman, D., & Song, W. (2001). Simple Procedures for Selecting the Best Simulated System When the Number of Alternatives is Large. Operations Research, 49(6), 950–963. https://doi.org/10.1287/opre.49.6.950.10019

YAGHUBIAN, A. R. M. A. N. R., HODGSON, T. H. O. M. J., & JOINES, J. E. F. F. R. E. Y. A. (2001). Dry-or-buy decision support for dry kiln scheduling in furniture production. IIE Transactions, 33(2), 131–136. https://doi.org/10.1080/07408170108936814

Kishimori, J., Lewbart, G. A., Marcellin-Little, D. J., Roe, S., Trogdon, M., Henson, H., & Stoskopf, M. K. (2001). Chelonian shell-fracture repair techniques. Exotic DVM, 3(5), 35–41.

Soewandi, H., & Elmaghraby, S. E. (2001). Sequencing three-stage flexible flowshops with identical machines to minimize makespan. IIE TRANSACTIONS, 33(11), 985–993. https://doi.org/10.1023/A:1010934318497

Wu, S. Y., Fang, S. C., & Lin, C. J. (2001). Solving general capacity problem by relaxed cutting plane approach. ANNALS OF OPERATIONS RESEARCH, Vol. 103, pp. 193–211. https://doi.org/10.1023/A:1012907206299

Elmaghraby, S. E. (2001, December 1). On the optimal release time of jobs with random processing times, with extensions to other criteria. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, Vol. 74, pp. 103–113. https://doi.org/10.1016/S0925-5273(01)00111-6

ElDessouki, W. M., Fathi, Y., & Rouphail, N. (2001). Meta-optimization using cellular automata with application to the combined trip distribution and assignment system optimal problem. COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, 16(6), 384–398. https://doi.org/10.1111/0885-9507.00241

Sommerich, C. M., Joines, S. M. B., & Psihogios, J. P. (2001). Effects of computer monitor viewing angle and related factors on strain, performance, and preference outcomes. HUMAN FACTORS, 43(1), 39–55. https://doi.org/10.1518/001872001775992480

Cormier, D. R., Taylor, J. B., & West, H. A., II. (2001). Methods and apparatus for rapidly prototyping three-dimensional objects from a plurality of layers. Washington, DC: U.S. Patent and Trademark Office.

Fang, S. C., Lin, C. J., & Wu, S. Y. (2001, April 1). Solving quadratic semi-infinite programming problems by using relaxed cutting-plane scheme. JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS, Vol. 129, pp. 89–104. https://doi.org/10.1016/S0377-0427(00)00544-6

Joines, S. M. B., & Sommerich, C. M. (2001). Comparison of self-assessment and partnered-assessment as cost-effective alternative methods for office workstation evaluation. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 28(6), 327–340. https://doi.org/10.1016/S0169-8141(01)00039-7

Lutz, T. J., Starr, H., Smith, C. A., Stewart, A. M., Monroe, M. J., Joines, S. M. B., & Mirka, G. A. (2001). The use of mirrors during an assembly task: a study of ergonomics and productivity. Ergonomics, 44(2), 215–228. https://doi.org/10.1080/001401301750048222

Steiger, N. M., & Wilson, JR. (2001). Convergence properties of the batch means method for simulation output analysis. INFORMS JOURNAL ON COMPUTING, 13(4), 277–293. https://doi.org/10.1287/ijoc.13.4.277.9737

Zukin, M., & Young, R. E. (2001). Applying fuzzy logic and constraint networks to a problem of manufacturing flexibility. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 39(14), 3253–3273. https://doi.org/10.1080/00207540110053570

Fathi, Y., & Palko, D. (2001). A mathematical model and a heuristic procedure for the robust design problem with high-low tolerances. IIE Transactions, 33(12), 1121–1127. https://doi.org/10.1080/07408170108936901

Yao, M. J., & Elmaghraby, S. E. (2001). The economic lot scheduling problem under power-of-two policy. COMPUTERS & MATHEMATICS WITH APPLICATIONS, 41(10-11), 1379–1393. https://doi.org/10.1016/S0898-1221(01)00103-1

Lu, J. J., & Fang, S. C. (2001). Solving nonlinear optimization problems with fuzzy relation equation constraints. FUZZY SETS AND SYSTEMS, 119(1), 1–20. https://doi.org/10.1016/S0165-0114(98)00471-0

Robin, D., & Marcellin-Little, D. J. (2001). Incomplete ossification of the humeral condyle in two Labrador retrievers. JOURNAL OF SMALL ANIMAL PRACTICE, 42(5), 231–234. https://doi.org/10.1111/j.1748-5827.2001.tb02026.x

Irizarry, M. D. A., Wilson, JR, & Trevino, J. (2001). A flexible simulation tool for manufacturing-cell design, II: response surface analysis and case study. IIE TRANSACTIONS, 33(10), 837–846. https://doi.org/10.1023/A:1010970504862

Irizarry, M. D. A., Wilson, JR, & Trevino, J. (2001). A flexible simulation tool for manufacturing-cell design, I: model structure, operation, and case study. IIE TRANSACTIONS, 33(10), 827–836. https://doi.org/10.1023/A:1010966420792

Taylor, J. B., Cormier, D. R., Joshi, S., & Venkataraman, V. (2001). Contoured edge slice generation in rapid prototyping via 5-axis machining. Robotics and Computer-Integrated Manufacturing, 17(1-2), 13–18.

Elmaghraby, S. E., Soewandi, H., & Yao, M. J. (2001). Chance-constrained programming in activity networks: A critical evaluation. EUROPEAN JOURNAL OF OPERATIONAL RESEARCH, 131(2), 440–458. https://doi.org/10.1016/S0377-2217(00)00086-2

Loetamonphong, J., & Fang, S. C. (2001). Optimization of fuzzy relation equations with max-product composition. FUZZY SETS AND SYSTEMS, 118(3), 509–517. https://doi.org/10.1016/S0165-0114(98)00417-5

Wilson, J. R., & Goldsman, D. (2001). Alan Pritsker's multifaceted career: theory, practice,education, entrepreneurship, and service. IIE Transactions, 33(3), 139–147. https://doi.org/10.1080/07408170108936818

Fang, S. C., & Tsao, H. S. (2001). Minimum entropy principle: Image reconstruction. In Encyclopedia of optimization / [editors, C.A. Floudas and P.M. Pardalos]. Dordrecht: London: Kluwer Academic, c2001. Dordrecht: London: Kluwer Academic.

Fang, S. C., & Tsao, H. S. J. (2001). Entropy optimization: Measures and properties. In Encyclopedia of optimization / [editors, C.A. Floudas and P.M. Pardalos]. Dordrecht: London: Kluwer Academic.

Fang, S.-C., & Tsao, H. S. J. (2001). Entropy optimization: Interior-point methods. In Encyclopedia of optimization / [editors, C.A. Floudas and P.M. Pardalos]. Dordrecht: London: Kluwer Academic, c2001. https://doi.org/10.1007/978-0-387-74759-0_159

Scott, C., & Fang, S. C. (2001). Untitled - Foreword. Annals of Operations Research, 105(2001), 13–14.

Chao, X. L., Henderson, W., & Taylor, P. G. (2001). State-dependent coupling in general networks. QUEUEING SYSTEMS, 39(4), 337–348. https://doi.org/10.1023/A:1013905526759

Agrawal, M. K., & Elmaghraby, S. E. (2001). On computing the distribution function of the sum of independent random variables. Computers & Operations Research, 28(5), 473–483.

Yaghubian, A. R., Hodgson, T. J., & Joines, J. A. (2001). Dry-or-buy decision support for dry kiln scheduling in furniture production. IIE Transactions, 33(2), 131–136. https://doi.org/10.1023/A:1007603002606

Kelaher, D., Nay, T., Lawrence, B., Lamar, S., & Sommerich, C. M. (2001). An investigation of the effects of touchpad location within a notebook computer. APPLIED ERGONOMICS, 32(1), 101–110. https://doi.org/10.1016/S0003-6870(00)00020-X

Wilson, JR. (2001). A multiplicative decomposition property of the screening-and-selection procedures of Nelson et al. OPERATIONS RESEARCH, 49(6), 964–966. https://doi.org/10.1287/opre.49.6.964.10013

Kuhl, M. E., & Wilson, JR. (2001). Modeling and simulating Poisson processes having trends or nontrigonometric cyclic effects. EUROPEAN JOURNAL OF OPERATIONAL RESEARCH, 133(3), 566–582. https://doi.org/10.1016/S0377-2217(00)00203-4

Cormier, D., & Taylor, J. (2001). A process for solvent welded rapid prototype tooling. Robotics and Computer-Integrated Manufacturing, 17(1-2), 151–157.

Psihogios, J. P., Sommerich, C. M., Mirka, G. A., & Moon, S. D. (2001). A field evaluation of monitor placement effects in VDT users. APPLIED ERGONOMICS, 32(4), 313–325. https://doi.org/10.1016/S0003-6870(01)00014-X