Edward P. Fitts Department of Industrial & Systems Engineering - 2002

Aytug, H., Lawley, M. A., McKay, K. N., Mohan, S., & Uzsoy, R. (2002, November). Executing Production Schedules in the Face of Uncertainties. Presented at the INFORMS National Meeting, San Jose, CA.

Uzsoy, R. (2002, November). Supply Chain Management: History and Trends. Presented at the Lafeyette New Economy Network, Ivy Tech Community College, Lafayette, IN.

Asmundsson, J., Rardin, R. L., & Uzsoy, R. (2002, December). Modeling Capacity in Production and Supply Chain Planning. Presented at the General Motors Research Laboratories, Warren, MI.

Uzsoy, R. (2002, February). Capacity and Congestion in Modelling Supply Chains. Presented at the NSF Workshop on Supply Chain Management and E-Commerce, University of Florida, Gainesville, FL.

Asmundsson, J., Rardin, R. L., & Uzsoy, R. (2002, July). Compact Nonlinear Capacity Models for Supply Chain Planning. Presented at the United Technologies Research Center.

Orcun, S., Pekny, J., Asmundsson, J., & Uzsoy, R. (2002, September). SCOPE for Rapid Prototyping of Complex Supply Chains. Presented at the American Institute of Chemical Engineers, Indianapolis, IN.

Asmundsson, J. M., & Uzsoy, R. (2002, November). Modeling Cpacity in Production and Supply Chain Planning. Presented at the INFORMS National Meeting, San Jose, CA.

Wang, C.-S., & Uzsoy, R. (2002). A genetic algorithm to minimize maximum lateness on a batch processing machine. Computers & Operations Research, 29(12), 1621–1640. https://doi.org/10.1016/s0305-0548(01)00031-4

Akcali, E., Uzsoy, R., Hiscock, D. G., Moser, A. L., & Teyner, T. J. (2002). Alternative loading and dispatching policies for furnace operations in semiconductor manufacturing: a comparison by simulation. Presented at the WSC 2000, Winter Simulation Conference. https://doi.org/10.1109/wsc.2000.899121

King, R. E., Brain, L. A. C., & Thoney, K. A. (2002). Control of yarn inventory for a cotton spinning plant: part 2: Correlated demand and seasonality. Journal of Textile and Apparel Management, 2(2).

King, R. E., Brain, L. A. C., & Thoney, K. A. (2002). Control of yarn inventory for a cotton spinning plant: part 1: Uncorrelated demand. Journal of Textile and Apparel Management, 2(2).

Fang, S., & Elmaghraby, S. E. (2002). Operations Research. In R. A. Meyers (Ed.), Encyclopedia of Physical Science and Technology (3rd ed., Vol. 11, pp. 193–218). San Diego, CA: Academic Press, Inc.

Fang, S., & Nuttle, H. L. W. (2002). Message from the Editors. Fuzzy Optimization and Decision Making, 1, 5–9. https://doi.org/10.1023/A:1013741321827

Birbil, I., & Fang, S. (2002). On the Multipoint Stochastic Search Method for Global Optimization. Proceedings of ISORA02. Presented at the ISORA02.

Fang, S., Wang, S., & Nuttle, H. L. W. (2002). Tolerable Solution Sets on Interval-Valued Fuzzy Relation Equations, with S. Wang and H.L.W. Proceedings of the 6th Joint Conference on Information Science, 74–77.

Fang, S. C., Lee, D. N., & Tsao, H.-S. J. (2002). A Bayesian analysis of entropy optimization for uncertainty modeling. 1993 (2nd) International Symposium on Uncertainty Modeling and Analysis. Presented at the 1993 (2nd) International Symposium on Uncertainty Modeling and Analysis, College Park, MD. https://doi.org/10.1109/isuma.1993.366737

Wu, P., Fang, S.-C., Nuttle, H. L. W., King, R. E., & Wilson, J. R. (2002). Decision surface modeling of textile spinning operations using neural network technology. Proceedings of 1994 IEEE/IAS Annual Textile, Fiber and Film Industry Technical Conference. Presented at the 1994 IEEE/IAS Annual Textile, Fiber and Film Industry Technical Conference, Greenville, SC. https://doi.org/10.1109/texcon.1994.320735

Fang, S.-C., & Hu, C.-F. (2002). Solving Fuzzy Variational Inequalities. Fuzzy Optimization and Decision Making, 1(1), 113–133. https://doi.org/10.1023/a:1013736011349

Joines, J. A., Gupta, D., Gokce, M. A., King, R. E., & Kay, M. G. (2002). Supply chain multi-objective simulation optimization. Winter Simulation Conference Proceedings, 2, 1306–1314. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0036923655&partnerID=MN8TOARS

Mattila, H., King, R., & Ojala, N. (2002). Retail performance measures for seasonal fashion. Journal of Fashion Marketing and Management: An International Journal, 6(4), 340–351. https://doi.org/10.1108/13612020210448637

Lertworasirikul, S., Fang, S., Nuttle, H. L. W., & Joines, J. A. (2002). Fuzzy Data Envelopment Analysis. Proceedings of the 9th Bellman Continuum, 342, 342–353.

Melton, R., Culbreth, C. T., J.A., J., & Roberts, S. D. (2002). Design and Analysis of Furniture Finishing Systems. Forest Products Journal, 52(7-8), 27–33.

Lertworasirikul, S., Fang, S.-C., Joines, J. A., & Nuttle, H. L. (2002). A Possibility Approach to Fuzzy Data Envelopment Analysis. 8th International Conference on Fuzzy Theory and Technology. Durham, N.C.

Joines, J., & Kay, M. G. (2002). 2002 hybrid genetic algorithms and random linkage. CEC'02 :  proceedings of the 2002 Congress on Evolutionary Computation : May 12-17, 2002, Hilton Hawaiian Village Hotel, Honolulu, Hawaii, 2, 1733–1738. https://doi.org/10.1109/CEC.2002.1004504

Thoney, K. A., Hodgson, T. J., Joines, J. A., & Maninagarajan, P. (2002). Rolling horizon scheduling of large job shops. Proceedings of the 2002 Winter Simulation Conference: Manchester Grand Hyatt San Diego, San Diego, CA, U.S.A., December 8-11, 2002. https://doi.org/10.1109/wsc.2002.1166485

Melton, R., Culbreth, C. T., Joines, J. A., & Roberts, S. D. (2002). Design and analysis of furniture finishing systems. Forest Products Journal, 52(7-8), 27–33.

King, R. E., Moon, W. K., Nuttle, H. L. W., & Thoney, K. A. (2002). Case Study Analysis of Inventory Stocking Policies to Support Replenishment: A Supply-chain Perspective. Journal of the Textile Institute, 93(3), 25–35. https://doi.org/10.1080/00405000208658356

Newnan, D. G., Lavelle, J. P., & Eschenbach, T. G. (2002). Essentials of engineering economic analysis (2nd ed.). New York: Oxford University Press.

Spurlin, J. E., Rajala, S. A., Lavelle, J. P., & Hoskins, O. J. (2002). Outcomes assessment:  developing an electronic assessment database as a model for collection and analysis of data. American Society for Engineering Education.

Marcellin-Little, D. J., Roe, S. C., Rovesti, G. L., Bosio, A., & Ferretti, A. (2002). Are circular external Fixators weakened by the use of hemispheric washers? VETERINARY SURGERY, 31(4), 367–374. https://doi.org/10.1053/jvet.2002.33604

Riane, F., Artiba, A., & Elmaghraby, S. E. (2002, November 20). Sequencing a hybrid two-stage flowshop with dedicated machines. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 40, pp. 4353–4380. https://doi.org/10.1080/00207540210159536

Steiger, N. M., & Wilson, JR. (2002). An improved batch means procedure for simulation output analysis. MANAGEMENT SCIENCE, 48(12), 1569–1586. https://doi.org/10.1287/mnsc.48.12.1569.438

Cheng, H., Fang, S. C., & Lavery, J. E. (2002). Univariate cubic L-1 splines - A geometric programming approach. MATHEMATICAL METHODS OF OPERATIONS RESEARCH, 56(2), 197–229. https://doi.org/10.1007/s001860200216

Chiou, C. J., & Lee, Y.-S. (2002). Swept surface determination for five-axis numerical control machining. International Journal of Machine Tools & Manufacture, 42(14), 1497–1507. https://doi.org/10.1016/S0890-6955(02)00110-4

Haudiquet, P. R., Marcellin-Little, D. J., & Stebbins, M. E. (2002). Use of the distomedial-proximolateral oblique radiographic view of the elbow joint for examination of the medial coronoid process in dogs. AMERICAN JOURNAL OF VETERINARY RESEARCH, 63(7), 1000–1005. https://doi.org/10.2460/ajvr.2002.63.1000

Kaber, D. B., Riley, J. M., & Tan, K. W. (2002). Improved usability of aviation automation through direct manipulation and graphical user interface design. INTERNATIONAL JOURNAL OF AVIATION PSYCHOLOGY, 12(2), 153–178. https://doi.org/10.1207/S15327108IJAP1202_4

Fathi, Y., & Barnette, K. W. (2002). Heuristic procedures for the parallel machine problem with tool switches. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 40(1), 151–164. https://doi.org/10.1080/00207540110076115

Wu, P. S., Fang, S. C., & Nuttle, H. L. W. (2002). Efficient neural network learning using second order information with fuzzy control. NEUROCOMPUTING, 43(2002 Mar), 197–217. https://doi.org/10.1016/S0925-2312(01)00336-8

Rovesti, G. L., Bascucci, M., Schmidt, K., & Marcellin-Little, D. J. (2002). Limb sparing using a double bone-transport technique for treatment of a distal tibial osteosarcoma in a dog. VETERINARY SURGERY, Vol. 31, pp. 70–77. https://doi.org/10.1053/jvet.2002.29987

Boyle, K. L., Marcellin-Little, D. J., & Levine, D. (2002). An interdisciplinary animal physical rehabilitation course for physical therapy and veterinary students. JOURNAL OF VETERINARY MEDICAL EDUCATION, 29(3), 183–185. https://doi.org/10.3138/jvme.29.3.183

Chiou, C. J., & Lee, Y. S. (2002). A machining potential field approach to tool path generation for multi-axis sculptured surface machining. COMPUTER-AIDED DESIGN, 34(5), 357–371. https://doi.org/10.1016/S0010-4485(01)00102-6

Koc, B., & Lee, Y. S. (2002). Non-uniform offsetting and hollowing objects by using biarcs fitting for rapid prototyping processes. COMPUTERS IN INDUSTRY, 47(1), 1–23. https://doi.org/10.1016/S0166-3615(01)00141-5

Kloypayan, J., & Lee, Y. S. (2002). Material engagement analysis of different endmills for adaptive feedrate control in milling processes. COMPUTERS IN INDUSTRY, 47(1), 55–76. https://doi.org/10.1016/S0166-3615(01)00136-1

Wosar, M. A., Marcellin-Little, D. J., & Roe, S. C. (2002). Influence of bolt tightening torque, wire size, and component reuse on wire fixation in circular external fixation. VETERINARY SURGERY, Vol. 31, pp. 571–576. https://doi.org/10.1053/jvet.2002.34672

Mirka, G. A., Shivers, C., Smith, C., & Taylor, J. (2002). Ergonomic interventions for the furniture manufacturing industry. Part II - Handtools. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 29(5), 275–287. https://doi.org/10.1016/S0169-8141(01)00068-3

Mirka, G. A., Smith, C., Shivers, C., & Taylor, J. (2002). Ergonomic interventions for the furniture manufacturing industry. Part I - lift assist devices. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 29(5), 263–273. https://doi.org/10.1016/S0169-8141(01)00067-1

Melton, R. H., Culbreth, C. T., Roberts, S. D., & Joines, J. A. (2002). Design and evaluation of furniture finishing systems. Forest Products Journal, 52(7/8), 27.

Koc, B., & Lee, Y. S. (2002). Adaptive ruled layers approximation of STL models and multiaxis machining applications for rapid prototyping. JOURNAL OF MANUFACTURING SYSTEMS, 21(3), 153–166. https://doi.org/10.1016/S0278-6125(02)80159-5

Wilson, JR. (2002). Responsible authorship and peer review. SCIENCE AND ENGINEERING ETHICS, 8(2), 155–174. https://doi.org/10.1007/s11948-002-0016-3

Loetamonphong, H., Fang, S. C., & Young, R. E. (2002). Multi-objective optimization problems with fuzzy relation equation constraints. FUZZY SETS AND SYSTEMS, 127(2), 141–164. https://doi.org/10.1016/S0165-0114(01)00052-5

Sommerich, C. M., Starr, H., Smith, C. A., & Shivers, C. (2002). Effects of notebook computer configuration and task on user biomechanics, productivity, and comfort. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 30(1), 7–31. https://doi.org/10.1016/S0169-8141(02)00075-6

Lada, E. K., Lu, J. C., & Wilson, JR. (2002). A wavelet-based procedure for process fault detection. IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 15(1), 79–90. https://doi.org/10.1109/66.983447

Medaglia, A. L., Fang, S. C., Nuttle, H. L. W., & Wilson, JR. (2002). An efficient and flexible mechanism for constructing membership functions. EUROPEAN JOURNAL OF OPERATIONAL RESEARCH, 139(1), 84–95. https://doi.org/10.1016/S0377-2217(01)00157-6

Smith, C. A., Sommerich, C. M., Mirka, G. A., & George, M. C. (2002). An investigation of ergonomic interventions in dental hygiene work. Applied Ergonomics, 33(2), 175–184.

Economic evaluation of advanced technologies: Techniques and case studies. (2002). New York: Taylor & Francis.

Jin, Z. H., Ohno, K., Ito, T., & Elmaghraby, S. E. (2002). Scheduling hybrid flowshops in printed circuit board assembly lines. Production and Operations Management, 11(2), 216–230.

Thoney, K. A., Hodgson, T. J., King, R. E., Taner, M. R., & Wilson, A. D. (2002). Satisfying due-dates in large multi-factory supply chains. IIE TRANSACTIONS, 34(9), 803–811. https://doi.org/10.1080/07408170208928913

Jaegger, G., Marcellin-Little, D. J., & Levine, D. (2002). Reliability of goniometry in Labrador Retrievers. AMERICAN JOURNAL OF VETERINARY RESEARCH, 63(7), 979–986. https://doi.org/10.2460/ajvr.2002.63.979

Medaglia, A. L., Fang, S. C., & Nuttle, H. L. W. (2002, April 1). Fuzzy controlled simulation optimization. FUZZY SETS AND SYSTEMS, Vol. 127, pp. 65–84. https://doi.org/10.1016/S0165-0114(01)00153-1

Chen, S.-H., Fang, S.-C., & Tsao, H.-S. J. (2002). Entropic perturbation method for solving a system of linear inequalities. Journal of Computational and Applied Mathematics, 145(1), 133–149. https://doi.org/10.1016/S0377-0427(01)00540-4

Shivers, C. L., Mirka, G. A., & Kaber, D. B. (2002). Effect of grip span on lateral pinch grip strength. HUMAN FACTORS, 44(4), 569–577. https://doi.org/10.1518/0018720024496999