Works Published in 1998
Displaying works 41 - 56 of 56 in total
Sorted by most recent date added to the index first, which may not be the same as publication date order.
1998 article
Hinged ilizarov external fixation for correction of antebrachial deformities
VETERINARY SURGERY, Vol. 27, pp. 231–245.
MeSH headings : Animals; Bone Lengthening / veterinary; Bone Wires / veterinary; Carpus, Animal / physiology; Dogs / abnormalities; Dogs / surgery; External Fixators / veterinary; Female; Follow-Up Studies; Forelimb / abnormalities; Forelimb / diagnostic imaging; Forelimb / surgery; Male; Osteogenesis; Osteotomy / veterinary; Postoperative Care / veterinary; Postoperative Complications / veterinary; Radiography; Radius / surgery; Range of Motion, Articular; Reoperation / veterinary; Ulna / surgery
TL;DR:
Although complications were present in six of seven dogs, the outcome of hinged Ilizarov external fixation was successful in all dogs treated for deformities of the antebrachium, and allows precise correction of complex antebrACHial deformities with minimal tissue trauma.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
1. No Poverty
(OpenAlex)
3. Good Health and Well-being
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
1998 journal article
Evaluation of AGV routeing strategies using hierarchical simulation
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 36(7), 1961–1976.
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Sources: Web Of Science, ORCID
Added: August 6, 2018
1998 journal article
Detection of loops and singularities of surface intersections
COMPUTER-AIDED DESIGN, 30(14), 1059–1067.
author keywords: surface intersection; singularities; loop detection; vector fields; critical points
TL;DR:
A topological method to detect the existence of closed loops or singularities when two flat surface patches intersect each other is presented, based on an oriented distance function defined between two intersecting surfaces.
(via Semantic Scholar)
Sources: Web Of Science, ORCID
Added: August 6, 2018
1998 journal article
A method for developing biomechanical profiles of hand-intensive tasks
Clinical Biomechanics (Bristol, Avon), 13(4-5), 261–271.
Source: NC State University Libraries
Added: August 6, 2018
1998 journal article
A constraint-based genetic algorithm for concurrent engineering
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 36(6), 1679–1697.
TL;DR:
An approach to concurrent engineering problems is presented that extends the conventional genetic algorithm approach to handle the complex variety of variables and constraints that are inherent in a typical concurrent engineering problem.
(via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018
1998 journal article
A case study in off-line quality control: characterization and optimization of batch dyeing process design
INTERNATIONAL JOURNAL OF TECHNOLOGY MANAGEMENT, 16(4-6), 358–382.
author keywords: off-line quality control; quality engineering; parameter design; robust design; design optimization; textiles dyeing; colour control
TL;DR:
This method is used to identify optimal batch dyeing process parameter settings, which produce target colour with the least colour variation within and among dyed fabric pieces, which are formulated and solved as a nonlinear programming problem.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
2. Zero Hunger
(Web of Science)
Sources: Web Of Science, ORCID
Added: August 6, 2018
1998 journal article
An unconstrained convex programming approach to linear semi-infinite programming
SIAM JOURNAL ON OPTIMIZATION, 8(2), 443–456.
author keywords: semi-infinite programming; linear programming; convex programming; entropy optimization
TL;DR:
An unconstrained convex programming dual approach for solving a class of linear semi-infinite programming problems is proposed and primal and dual convergence results are established under some basic assumptions.
(via Semantic Scholar)
citeseerx.ist.psu.edu (repository)
Sources: Web Of Science, ORCID
Added: August 6, 2018
1998 journal article
Fragmented coronoid process and incomplete ossification of the humeral condyle in a Rottweiler
Veterinary Surgery, 27(4), 354–357.
MeSH headings : Animals; Bone Diseases, Developmental / diagnostic imaging; Bone Diseases, Developmental / surgery; Bone Diseases, Developmental / veterinary; Dog Diseases / diagnostic imaging; Dog Diseases / surgery; Dogs; Humerus / diagnostic imaging; Humerus / pathology; Humerus / surgery; Male; Tomography, X-Ray Computed / veterinary; Ulna / diagnostic imaging; Ulna / pathology
TL;DR:
Incomplete ossification of the humeral condyle is present in Rottweilers and may coexist with fragmentation of the medial coronoid process in that breed and the radiographic diagnosis may be difficult.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: NC State University Libraries
Added: August 6, 2018
1998 personal communication
Solving interval-valued fuzzy relation equations
Li, G. Z., & Fang, S. C. (1998, May).
author keywords: composite interval-valued fuzzy relation equations; fuzzy relation equations; max-min composition
TL;DR:
This paper converts the composite interval-valued fuzzy relation equations into a fuzzy relation inequality system and proposes an efficient computational procedure to generate the whole solution set.
(via Semantic Scholar)
Sources: Web Of Science, ORCID
Added: August 6, 2018
1998 journal article
Non-isoparametric tool path planning by machining strip evaluation for 5-axis sculptured surface machining
COMPUTER-AIDED DESIGN, 30(7), 559–570.
author keywords: 5-axis NC machining; non-isoparametric tool path generation; sculptured surface machining; machining strip evaluation; CAD/CAM; CNC machining
TL;DR:
The techniques presented in this paper can be used to improve 5-axis machined surface quality and to automate the non-isoparametric cutter path generation for CAD/CAM systems.
(via Semantic Scholar)
Sources: Web Of Science, ORCID
Added: August 6, 2018
1998 journal article
Mathematical modelling using different endmills and tool placement problems for 4- and 5-axis NC complex surface machining
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 36(3), 785–814.
Sources: Web Of Science, ORCID
Added: August 6, 2018
1998 journal article
Solving fuzzy inequalities with concave membership functions
FUZZY SETS AND SYSTEMS, 99(2), 233–240.
author keywords: fuzzy mathematical programming; fuzzy membership functions; systems of fuzzy inequalities
TL;DR:
It is shown that a system of fuzzy inequalities with concave membership functions can be converted to a regular convex programming problem and a “method of centres” with “entropic regularization” techniques is proposed for solving such a problem.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
10. Reduced Inequalities
(Web of Science; OpenAlex)
Sources: Web Of Science, ORCID
Added: August 6, 2018
1998 journal article
Note. Satisfying due dates in large job shops
MANAGEMENT SCIENCE, 44(10), 1442–1446.
author keywords: job shop scheduling; maximum lateness; simulation
UN Sustainable Development Goal Categories
8. Decent Work and Economic Growth
(OpenAlex)
12. Responsible Consumption and Production
(Web of Science)
Sources: Web Of Science, ORCID
Added: August 6, 2018
1998 journal article
Decision support system for lumber procurement and dry kiln scheduling
Forest Products Journal, 48(9), 51–59.
Sources: NC State University Libraries, ORCID
Added: August 6, 2018
1998 journal article
Fuzzy resolution on the infeasibility of variational inequality
EUROPEAN JOURNAL OF OPERATIONAL RESEARCH, 106(1), 198–203.
author keywords: variational inequality; generalized complementarity problems; single objective programming problems; fuzzy relation; infeasibility
TL;DR:
By applying fuzzy set theory, this study “soften” the original problem with fuzzy relation and denote it by VI and the solutions which satisfy the variation inequality to some degree μ, 0⩽ μ ⩽ 1 are searched with minimum relaxation.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
10. Reduced Inequalities
(OpenAlex)
Source: Web Of Science
Added: August 6, 2018
1998 journal article
A fuzzy due-date bargainer for the make-to-order manufacturing systems
IEEE TRANSACTIONS ON SYSTEMS MAN AND CYBERNETICS PART C-APPLICATIONS AND REVIEWS, 28(3), 492–497.
author keywords: branch-and-bound; due-date assignment; fuzzy optimization; just-in-time (JIT); MRP-II; production planning
TL;DR:
A combined due-date assignment and production planning methodology for the make-to-order manufacturing systems is developed using manufacturing resource planning data from a furniture manufacturing company, and experimental results indicate its potential as a useful tool for real applications.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Sources: Web Of Science, ORCID
Added: August 6, 2018
Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.
Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.
