Edward P. Fitts Department of Industrial & Systems Engineering

Works Published in 1998

search works

Displaying works 1 - 20 of 56 in total

Sorted by most recent date added to the index first, which may not be the same as publication date order.

1998 journal article

Electro-Discharge of Nanocrystalline Nb-Al Powders Produced by Mechanical Alloying

Journal of Materials Science, 33(1), 241–246.

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Crossref, NC State University Libraries
Added: February 22, 2023

1998 conference paper

Predictable Scheduling of a Single Machine with Breakdowns and Sensitive Jobs

O’Donovan, R., McKay, K. N., & Uzsoy, R. (1998, April). Presented at the INFORMS National Meeting, Montreal, Canada.

By: R. O’Donovan, K. McKay & R. Uzsoy

Event: INFORMS National Meeting at Montreal, Canada

Source: NC State University Libraries
Added: May 1, 2022

1998 conference paper

Empirical Evaluation of Heuristics: A Tutorial

Rardin, R. L., & Uzsoy, R. (1998, April). Presented at the INFORMS National Meeting, Montreal, Canada.

By: R. Rardin & R. Uzsoy

Event: INFORMS National Meeting at Montreal, Canada

Source: NC State University Libraries
Added: May 1, 2022

1998 conference paper

Decomposition Procedures for Scheduling Complex Job Shops

Proceedings of the Sixth International Workshop on Project Management and Scheduling. Presented at the Sixth International Workshop on Project Management and Scheduling.

By: E. Demirkol, R. Uzsoy & C. Wang

Event: Sixth International Workshop on Project Management and Scheduling

Source: NC State University Libraries
Added: May 1, 2022

1998 journal article

Supply Chain Management for Companies with Product Recovery and Remanufacturing Capability

International Journal of Environmentally Conscious Design and Manufacturing, 7, 59–72.

By: R. Uzsoy & G. Venkatachalam

Source: NC State University Libraries
Added: May 1, 2022

1998 speech

Predictable Scheduling of Job Shops Subject To Machine Breakdowns

Uzsoy, R., & Mehta, S. V. (1998, March). Presented at the School of Chemical Engineering, Purdue University.

By: R. Uzsoy & S. Mehta

Event: School of Chemical Engineering, Purdue University

Source: NC State University Libraries
Added: May 1, 2022

1998 speech

A Senior Design Course with Industrial Experience

Uzsoy, R. (1998, April). Presented at the Central Indiana Chapter, Institute of Industrial Engineers.

By: R. Uzsoy

Event: Central Indiana Chapter, Institute of Industrial Engineers

Source: NC State University Libraries
Added: May 1, 2022

1998 speech

Management of Spare Parts Inventories in a Wafer Fabrication Facility

Teyner, T., & Uzsoy, R. (1998, May). Presented at the Harris Semiconductor, Melbourne, FL.

By: T. Teyner & R. Uzsoy

Event: Harris Semiconductor at Melbourne, FL

Source: NC State University Libraries
Added: May 1, 2022

1998 speech

Maintenance Management Problems in a Semiconductor Wafer Fabrication Facility

Uzsoy, R. (1998, November). Presented at the Department of Industrial Engineering, Texas A&M University.

By: R. Uzsoy

Event: Department of Industrial Engineering, Texas A&M University

Source: NC State University Libraries
Added: May 1, 2022

1998 conference paper

Effects of epitaxial silicon technology on the manufacturing performance of wafer fabrication lines

Twenty Third IEEE/CPMT International Electronics Manufacturing Technology Symposium (Cat. No.98CH36205). Presented at the Twenty Third IEEE/CPMT International Electronics Manufacturing Technology Symposium. 1998 IEMT Symposium.

By: J. Hughes*, G. Neudeck* & R. Uzsoy*

Event: Twenty Third IEEE/CPMT International Electronics Manufacturing Technology Symposium. 1998 IEMT Symposium on October 19-21, 1998

Sources: Crossref, NC State University Libraries
Added: March 26, 2022

1998 journal article

Control of a batch-processing machine: A computational approach

International Journal of Production Research, 36(11), 3167–3181.

By: A. Avramidis, K. Healy & R. Uzsoy*

TL;DR: A batch-processing machine subject to uncertain (Poisson) job arrivals is considered and computational procedures to minimize the expected long-run-average number of jobs in the system under a particular family of control policies are developed. (via Semantic Scholar)
Sources: Crossref, NC State University Libraries
Added: March 6, 2022

1998 journal article

Benchmarks for shop scheduling problems

European Journal of Operational Research, 109(1), 137–141.

By: E. Demirkol*, S. Mehta* & R. Uzsoy*

author keywords: combinatorial optimization; scheduling; benchmarks
TL;DR: This paper presents extensive sets of randomly generated test problems for the problems of minimizing makespan (Cmax) and maximum lateness (Lmax) in flow shops and job shops. (via Semantic Scholar)
Sources: Crossref, NC State University Libraries
Added: March 6, 2022

1998 journal article

Predictable scheduling of a job shop subject to breakdowns

IEEE Transactions on Robotics and Automation, 14(3), 365–378.

By: S. Mehta* & R. Uzsoy*

author keywords: job shop; predictable scheduling; rescheduling; scheduling; uncertainties
TL;DR: The approach to minimizing maximum lateness in a job shop environment with random machine breakdowns is applied, and it provides high predictability with minor sacrifices in shop performance. (via Semantic Scholar)
UN Sustainable Development Goal Categories
8. Decent Work and Economic Growth (OpenAlex)
Sources: Crossref, NC State University Libraries
Added: March 6, 2022

1998 journal article

Maintenance scheduling and staffing policies in a wafer fabrication facility

IEEE Transactions on Semiconductor Manufacturing, 11(2), 316–323.

By: S. Mosley*, T. Teyner & R. Uzsoy*

author keywords: maintenance management; scheduling; staffing; wafer fabrication
TL;DR: Results indicate that the choice of maintenance scheduling policy can significantly affect system performance under restrictive staffing-levels, and factory performance is shown to be sensitive to small changes in staffing level. (via Semantic Scholar)
Sources: Crossref, NC State University Libraries
Added: March 6, 2022

1998 journal article

Minimizing total tardiness on a batch processing machine with incompatible job families

IIE Transactions, 30(2), 165–178.

By: S. Mehta* & R. Uzsoy*

TL;DR: A dynamic programming algorithm is presented which has polynomial time complexity when the number of job families and the batch machine capacity are fixed and which can provide near optimal solutions in a reasonable amount of computation time. (via Semantic Scholar)
UN Sustainable Development Goal Categories
8. Decent Work and Economic Growth (OpenAlex)
Sources: Crossref, NC State University Libraries
Added: March 6, 2022

1998 journal article

Scheduling a single batch processing machine with secondary resource constraints

Journal of Manufacturing Systems, 17(1), 37–51.

author keywords: scheduling; semiconductor manufacturing; batch processing machines; heuristics
TL;DR: This paper studies the problems of minimizing total completion time and makespan on a single batch processing machine with job families and secondary resource constraints, and shows that the heuristics are capable of consistently obtaining good solutions in modest CPU times. (via Semantic Scholar)
UN Sustainable Development Goal Categories
8. Decent Work and Economic Growth (OpenAlex)
Sources: Crossref, NC State University Libraries
Added: March 6, 2022

1998 journal article

A capacity allocation problem with integer side constraints

European Journal of Operational Research, 109(1), 170–182.

author keywords: scheduling; network flows; semiconductor manufacturing
TL;DR: Focusing on the objectives of maximizing throughput and minimizing deviation from predetermined production goals, the problem is formulated as a maximum flow problem on a bipartite network with integer side constraints and efficient heuristics which obtain near-optimal solutions in negligible computation time are developed. (via Semantic Scholar)
Sources: Crossref, NC State University Libraries
Added: March 5, 2022

1998 report

Multicustomer Due-Date Bargainer

[Software]. Raleigh, NC: North Carolina State University.

By: H. Nuttle, S. Fang, D. Wang & M. Donovan

Source: NC State University Libraries
Added: March 22, 2021

1998 journal article

Cellular manufacturing & the concept of total quality

Computers and Industrial Engineering, 35(1-2), 89–92.

By: K. Reynolds*

Contributors: K. Reynolds*

author keywords: cellular; task; group technology; just in time; exchange zones
Source: ORCID
Added: August 20, 2020

1998 conference paper

Fusing a hyper-ellipsoid clustering Kohonen network with the Julier-Uhlmann-Kalman filter for autonomous mobile robot map building and tracking

Proceedings - IEEE International Conference on Robotics and Automation, 2, 1405–1410.

By: J. Janet n, M. White n, M. Kay n, J. Sutton n & J. Brickley n

Contributors: J. Janet n, M. White n, M. Kay n, J. Sutton n & J. Brickley n

TL;DR: A self-organizing hyperellipsoid clustering Kohonen neural network is fused with the Julier-Uhlmann-Kalman filter to perform map building and low-level position estimation and the inclusion of stochastic information inherent to the HEC map renders the JUKF an excellent tool for low- level tracking. (via Semantic Scholar)
UN Sustainable Development Goal Categories
11. Sustainable Cities and Communities (OpenAlex)
Source: ORCID
Added: April 29, 2020

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.