Works Published in 2015
Displaying works 1 - 20 of 143 in total
Sorted by most recent date added to the index first, which may not be the same as publication date order.
2015 conference paper
Vulnerability assessment in supply chain network design
The Proceedings of the 16th Asia Pacific Industrial Engineering and Management Systems Conference. Presented at the 16th Asia Pacific Industrial Engineering and Management Systems Conference, Vietnam.
Event: 16th Asia Pacific Industrial Engineering and Management Systems Conference at Vietnam
Source: NC State University Libraries
Added: December 17, 2023
2015 conference paper
A Supply Chain Network Design Considering Network Density
The Proceedings of the 10th International Congress on Logistics and SCM Systems. Presented at the 10th International Congress on Logistics and SCM Systems, Chiangmai, Thailand.
Event: 10th International Congress on Logistics and SCM Systems at Chiangmai, Thailand
Source: NC State University Libraries
Added: December 17, 2023
2015 journal article
Axiomatic aggregation of incomplete rankings
IIE Transactions, 12, 1–14.
figshare.com (repository)
UN Sustainable Development Goal Categories
16. Peace, Justice and Strong Institutions
(OpenAlex)
Source: ORCID
Added: December 9, 2023
2015 journal article
Roundoff-error-free algorithms for solving linear systems via cholesky and LU factorizations
INFORMS Journal on Computing, 27(4), 677–689.
Contributors: A. Escobedo* & E. Moreno-Centeno *
TL;DR:
This work introduces two roundoff-error-free factorizations that require storing the same number of individual elements and performing a similar number of operations as the traditional LU and Cholesky factorizations, thereby providing a complete tool set for solving systems of linear systems.
(via Semantic Scholar)
Source: ORCID
Added: December 9, 2023
2015 journal article
Finding optimal dwell points for automated guided vehicles in general guide-path layouts
International Journal of Production Economics, 170, 850–861.
TL;DR:
This paper develops a generic genetic algorithm (GA) that can be applied to all three versions of the problem of optimally locating dwell points for a given number of AGVs in a general guide-path layout and shows that the proposed GA procedure can yield optimal or near optimal solutions in reasonable time.
(via Semantic Scholar)
Sources: ORCID, Crossref, NC State University Libraries
Added: November 30, 2023
2015 article
Multiple Criteria Decision Making in Supply Chain Management
CRC Press.
Source: ORCID
Added: November 30, 2023
2015 chapter
A Supply Chain Network Design Considering Network Density
In Toward Sustainable Operations of Supply Chain and Logistics Systems (pp. 3–20). Springer International Publishing.
Source: ORCID
Added: November 30, 2023
2015 journal article
MACHINING FORCE MODELING OF VIBRATION-ASSISTED NANO-MACHINING PROCESS
Proceedings of the Asme 10th International Manufacturing Science and Engineering Conference, 2015, Vol 2, 2.
Contributors: X. Kong, L. Zhang, J. Dong , P. Cohen & Asme
Source: ORCID
Added: July 11, 2022
2015 conference paper
Electrohydrodynamic jet printing of silver seeds: Micro scale patterning by electroless copper deposition
ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015, 1.
Contributors: H. Qin, J. Dong & Y. Lee
Source: ORCID
Added: July 11, 2022
2015 journal article
ELECTROHYDRODYNAMIC JET PRINTING OF SILVER SEEDS: MICRO SCALE PATTERNING BY ELECTROLESS COPPER DEPOSITION
Proceedings of the Asme 10th International Manufacturing Science and Engineering Conference, 2015, Vol 1. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000365146800073&KeyUID=WOS:000365146800073
Contributors: H. Qin, J. Dong , Y. Lee & Asme
Source: ORCID
Added: July 11, 2022
2015 conference paper
AIMS- a metal additive-hybrid manufacturing system: System architecture and attributes
43rd North American Manufacturing Research Conference, NAMRC, 43, 273–286.
Source: NC State University Libraries
Added: June 3, 2022
2015 conference paper
A Column Generation Approach for MultipleProduct Dynamic Lot Sizing with Congestion
Kang, Y., Albey, E., & Uzsoy, R. (2015, August). Presented at the International Workshop on Lot Sizing, Haute Etudes Commercial, Montreal, Canada.
Event: International Workshop on Lot Sizing, Haute Etudes Commercial at Montreal, Canada
Source: NC State University Libraries
Added: May 1, 2022
2015 article proceedings
Lead time modeling in production planning
Presented at the 2015 Winter Simulation Conference (WSC).
Event: 2015 Winter Simulation Conference (WSC)
TL;DR:
This work uses a gradient based simulation optimization procedure (SOP) to determine the lead times that, when used in the FLT model, yield the best performance, suggesting that FLT and CF models are limited in representing the lead time dynamics.
(via Semantic Scholar)
Sources: Crossref, NC State University Libraries
Added: March 6, 2022
2015 article proceedings
Simulation-based performance assessment of production planning formulations for semiconductor wafer fabrication
Presented at the 2015 Winter Simulation Conference (WSC).
Event: 2015 Winter Simulation Conference (WSC)
TL;DR:
This paper examines the impact of the planning window and period length on the performance of the production planning formulations, and finds that the performance advantage of clearing functions that is observed in a static setting can be also observe in a rolling horizon setting.
(via Semantic Scholar)
Sources: Crossref, NC State University Libraries
Added: March 5, 2022
2015 journal article
A random keys genetic algorithm for a bicriterion project selection and scheduling problem
International Journal of Planning and Scheduling, 2(2), 110.
TL;DR:
A genetic algorithm incorporating random keys and an efficient decoding procedure into the well-known NSGA-II procedure is proposed and the performance of this algorithm is evaluated in extensive computational experiments comparing the approximations of the Pareto-optimal set it obtains to those from NS GA-II.
(via Semantic Scholar)
Sources: Crossref, NC State University Libraries
Added: February 26, 2022
2015 journal article
Transportation System and Trade Flows in Port Cities of China: A Random Coefficient Model
Journal of Systems Science and Information, 3(4), 289–300.
Sources: Crossref, NC State University Libraries
Added: June 13, 2021
2015 journal article
Trends in BMI and obesity in U.S. women of childbearing age during the period of 1980–2010
Health Systems, 4(3), 176–186.
author keywords: obesity; body mass index; health disparities; simulation
TL;DR:
There are differences in weight gain in black and white women, the racial disparity has worsened over time and that changes in theracial disparity were not because of changes inThe age structure of the population.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science; OpenAlex)
Sources: Crossref, NC State University Libraries
Added: May 17, 2021
2015 chapter
Analysis of a Downward Substitution Strategy in a Manufacturing/Remanufacturing System
In E. Pinson, F. Valente, & B. Vitoriano (Eds.), Operations Research and Enterprise Systems (pp. 186–198).
Ed(s): E. Pinson, F. Valente & B. Vitoriano
author keywords: Product substitution; Remanufacturing; Manufacturing; Inventory control; Markov decision process
TL;DR:
This work models this control problem as an infinite-horizon hybrid manufacturing/remanufacturing system with product substitution under stochastic demand and returns as a Markov Decision Process to determine the optimal manufacturing and remanufacturing decisions under product substitution.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Source: Crossref
Added: March 7, 2021
2015 journal article
Arts and Brain-Computer Interfaces (BCIs)
Brain-Computer Interfaces, 2(2-3), 57–59.
TL;DR:
The papers in the special issue present empirical and survey studies that explore contemporary research challenges involved in designing, developing and evaluating BCI applications related to the creation and experience of art.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Crossref, NC State University Libraries
Added: January 30, 2021
2015 journal article
Development of a high-resolution micro-torsion tester for measuring the shear modulus of metallic glass fibers
Measurement Science and Technology, 26(2), 025902.
author keywords: micro-scale; torsion; metallic glass fiber; shear modulus
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Sources: Crossref, NC State University Libraries
Added: September 4, 2020
Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.
Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.
