College of Textiles Administration - 2012 Pourdeyhimi, B., & Chappas, W. (2012). High surface area fiber and textiles made from the same (Patent No. US8129019B2). Anantharamaiah, N., & Pourdeyhimi, B. (2012). Staple fiber durable nonwoven fabrics (Patent No. US8148279B2). Deaett, M. A., Weedon, W. H., III, & Pourdeyhimi, B. (2012). Non-woven textile microwave patch antennas and components (Patent No. US8174449B2). Batra, S. K., & Pourdeyhimi, B. (2012). Introduction to Nonwovens Technology. Lancaster, Pennsylvania: Destech Publishing. Khansari, S., Sinha-Ray, S., Yarin, A., & Pourdeyhimi, B. (2012). Green Materials: Strength of Soy Protein Nanofiber Mats. Presented at the National Science Foundation, Division of Civil, Mechanical and Manufacturing Innovation (NSF CMMI) Engineering Research and Innovation Conference, Northeastern University, Boston, MA. Kilic, A., Shim, E., & Pourdeyhimi, B. (2012, October). Use of Additives to Enhance Electrostatic Charge in Filters. Presented at the Filtrex, Cologne, Germany. Pourdeyhimi, B. (2012, April). Stretch and Recovery, Stretch Nonwovens. Presented at the TechTextil, Atlanta, Georgia. Tuin, S. A., Miller, S. M., Ganesh, V., Cunningham, D. J., Pfeiler, W. T., Bernacki, S. H., … Loboa, E. G. (2012). Pulsatile Fluid Flow Increases RUNX2 Expression in Human Adipose Derived Stem Cells Cultured on Novel Three-Dimensional High Surface Area Poly(L-Lactic Acid) Scaffolds. Proceedings of the 14th Annual North Carolina Tissue Engineering and Regenerative Medicine Society Conference. Presented at the 14th Annual North Carolina Tissue Engineering and Regenerative Medicine Society Conference, Raleigh, NC. Loboa, E. G., Bodle, J., Charoenpanich, A., Mathieu, P., Mohiti-Asli, M., Tuin, S. A., & Williams, J. (2012). Biomimetic Forces and Scaffolds to Control Human Stem Cell Fate. Proceedings of the 11th Annual Meeting of the New Jersey Symposium on Biomaterials Science. Presented at the 11th Annual Meeting of the New Jersey Symposium on Biomaterials Science, New Brunswick, NJ. Tuin, S. A., Miller, S. M., Ganesh, V., Cunningham, D. J., Pfeiler, W. T., Bernacki, S. H., … Loboa, E. G. (2012). Novel High Surface Area Poly(L-Lactic Acid) Winged Fiber Scaffolds Increase RUNX2 Expression of Human Adipose Derive Stem Cells Exposed to Shear Stress. Proceedings of the Annual Joint Meeting of the Materials Research Society and the Materials Information Society. Presented at the Annual Joint Meeting of the Materials Research Society and the Materials Information Society, Raleigh, NC. Pourdeyhimi, B. (2012, September). Durable Nonwovens with Stretch and Recovery. Presented at the Man Made Fiber Conference, Dornbirn, Austria. Pourdeyhimi, B. (2012, September). Stretch and Recovery, Stretch Nonwovens. Presented at the Man Made Fiber Conference, Dornbirn, Austria. Pourdeyhimi, B. (2012, April). A New Generation of Micro-Nano Fiber Nonwovens. Presented at the Nonwovens Research Academy, Gothenburg, Sweden. Pourdeyhimi, B. (2012). Mixed Fiber and Nonwoven Fabrics Made from the Same (China Patent No. 101939469). Pourdeyhimi, B. (2012). High Strength Durable Micro and Nano-Fiber Fabrics Produced by Fibrillating Islands in the Sea Fibers (China Patent No. 101641469). Pourdeyhimi, B. (2012). Mixed Fiber and Nonwoven Fabrics Made from the Same (Germany Patent No. 2179081). Pourdeyhimi, B. (2012). Mixed Fiber and Nonwoven Fabrics Made from the Same (Korea Patent No. 10-1210973). Pourdeyhimi, B. (2012). An Improved Composite Filter Media with High Surface Area Fibers (China Patent No. 101617072). Sinha-Ray, S., Khansari, S., Yarin, A. L., & Pourdeyhimi, B. (2012). Effect of Chemical and Physical Cross-Linking on Tensile Characteristics of Solution-Blown Soy Protein Nanofiber Mats. Industrial & Engineering Chemistry Research, 51(46), 15109–15121. https://doi.org/10.1021/ie302359x Fotovati, S., Tafreshi, H. V., & Pourdeyhimi, B. (2012). A macroscale model for simulating pressure drop and collection efficiency of pleated filters over time. Separation and Purification Technology, 98, 344–355. https://doi.org/10.1016/j.seppur.2012.07.009 Demirci, E., Acar, M., Pourdeyhimi, B., & Silberschmidt, V. V. (2012). Computation of mechanical anisotropy in thermally bonded bicomponent fibre nonwovens. Computational Materials Science, 52(1), 157–163. https://doi.org/10.1016/j.commatsci.2011.01.033 Nanofiber-based energy-storage materials. (2012). Abstracts of Papers of the American Chemical Society. Retrieved from https://publons.com/publon/7178358/ Ji, L. W., Toprakci, O., Alcoutlabi, M., Yao, Y. F., Li, Y., Zhang, S., … Zhang, X. W. (2012). alpha-Fe2O3 nanoparticle-loaded carbon nanofibers as stable and high-capacity anodes for rechargeable lithium-ion batteries. ACS Applied Materials & Interfaces, 4. Toprakci, O., Toprakci, H. A. K., Ji, L. W., Xu, G. J., Lin, Z., & Zhang, X. W. (2012). Carbon nanotube-loaded electrospun LiFePO4/carbon composite nanofibers as stable and binder-free cathodes for rechargeable lithium-ion batteries. ACS Applied Materials & Interfaces, 4. Zhang, X. (2012). Nanofiber-based energy-storage materials. Abstracts of Papers of the American Chemical Society, 243. Zhang, S., Li, Y., Xu, G., Li, S., Lu, Y., Topracki, O., & Zhang, X. (2012). Li₂MnSiO₄ Carbon Composite Nanofibers as a High-Capacity Cathode Material for Li-Ion Batteries. Soft Nanoscience Letters, 02(03), 54–57. https://doi.org/10.4236/snl.2012.23010 Yin, Y. H., Gao, M. X., Pan, H. G., Shen, L. K., Ye, X., Liu, Y. F., … Zhang, X. W. (2012). High-rate capability of LiFePO(4) cathode materials containing Fe(2)P and trace carbon. Journal of Power Sources, 199. https://doi.org/https://doi.org/10.1016/j.jpowsour.2011.10.042 Zhang, S., Li, Y., Xu, G. J., Li, S. L., Lu, Y., Toprakci, O., & Zhang, X. W. (2012). High-capacity Li2Mn0.8Fe0.2SiO4/carbon composite nanofiber cathodes for lithium-ion batteries. Journal of Power Sources, 213. https://doi.org/https://doi.org/10.1016/j.jpowsour.2012.04.011 Zhang, S., Lin, Z., Ji, L., Li, Y., Xu, G., Xue, L., … Zhang, X. (2012). Cr-doped Li2MnSiO4/carbon composite nanofibers as high-energy cathodes for Li-ion batteries. Journal of Materials Chemistry, 22(29), 14661–14666. https://doi.org/10.1039/c2jm32213g Lee, H., Alcoutlabi, M., Watson, J. V., & Zhang, X. (2012). Polyvinylidene fluoride-co-chlorotrifluoroethylene and polyvinylidene fluoride-co-hexafluoropropylene nanofiber-coated polypropylene microporous battery separator membranes. Journal of Polymer Science Part B: Polymer Physics, 51(5), 349–357. https://doi.org/10.1002/polb.23216 Nawalakhe, R., Shi, Q., Vitchuli, N., Bourham, M. A., Zhang, X., & McCord, M. G. (2012). Novel Atmospheric Plasma Enhanced Silk Fibroin Nanofiber Gauze Composite Wound Dressings. Journal of Fiber Bioengineering and Informatics, 5(3), 227–242. https://doi.org/10.3993/jfbi09201201 Shi, Q., Vitchuli, N., Nowak, J., Jiang, S., Caldwell, J. M., Breidt, F., … McCord, M. (2012). Multifunctional and durable nanofiber-fabric-layered composite for protective application. Journal of Applied Polymer Science, 128(2), 1219–1226. https://doi.org/10.1002/app.11352 Lithium-Ion Batteries: Amorphous Carbon Coating of Silicon-Carbon Nanofibers as Anode Materials. (2012). 11th Annual NC State Summer Undergraduate Research Symposium. Hartman, L., Joines, J. A., Thoney, K. A., & King, R. E. (2012). The effect speed and replenishment flexibility has on overall costs of sourcing apparel products. Journal of the Textile Institute, 103(6), 604–621. https://doi.org/10.1080/00405000.2011.595106 Sas, I., Gorga, R. E., Joines, J. A., & Thoney, K. A. (2012). [Review of Literature review on superhydrophobic self-cleaning surfaces produced by electrospinning]. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 50(12), 824–845. https://doi.org/10.1002/polb.23070 Joines, J. A., & Roberts, S. D. (2012). Simulation Modeling with SIMIO: A Workbook (2nd ed.). Simio LLC: Sewickley, PA: SIMIO LLC. Venu, L. B. S., Shim, E., Anantharamaiah, N., & Pourdeyhimi, B. (2012). Three-Dimensional Structural Characterization of Nonwoven Fabrics. MICROSCOPY AND MICROANALYSIS, 18(6), 1368–1379. https://doi.org/10.1017/s143192761201375x Xu, C. H., Shamey, R., Hinks, D., & El-Shafei, A. (2012). Cotton bleaching optimization using a butyrolactam-based cationic bleach activator. AATCC Review, 12(1), 66–70. Li, Y., Lin, Z., Xu, G., Yao, Y., Zhang, S., Toprakci, O., … Zhang, X. (2012). Electrochemical Performance of Carbon Nanofibers Containing an Enhanced Dispersion of Silicon Nanoparticles for Lithium-Ion Batteries by Employing Surfactants. ECS ELECTROCHEMISTRY LETTERS, 1(2), A31–A33. https://doi.org/10.1149/2.002202eel Datla, V., Shim, E., & Pourdeyhimi, B. (2012). Surface modifications of polypropylene with nonylphenol ethoxylates melt additives. POLYMER ENGINEERING AND SCIENCE, 52(9), 1920–1927. https://doi.org/10.1002/pen.23153 Asli, M. M., Pourdeyhimi, B., & Loboa, E. G. (2012). Release Profiles of Tricalcium Phosphate Nanoparticles from Poly(L-lactic acid) Electrospun Scaffolds with Single Component, Core-Sheath, or Porous Fiber Morphologies: Effects on hASC Viability and Osteogenic Differentiation. MACROMOLECULAR BIOSCIENCE, 12(7), 893–900. https://doi.org/10.1002/mabi.201100470 Zhang, S., Li, Y., Xu, G., Li, S., Lu, Y., Toprakci, O., & Zhang, X. (2012). High-capacity Li2Mn0.8Fe0.2SiO4/carbon composite nanofiber cathodes for lithium-ion batteries. JOURNAL OF POWER SOURCES, 213, 10–15. https://doi.org/10.1016/j.jpowsour.2012.04.011 Das, D., Pradhan, A. K., & Pourdeyhimi, B. (2012). Dependence of the liquid absorption behavior of nonwovens on their material and structural characteristics: Modeling and experiments. JOURNAL OF APPLIED POLYMER SCIENCE, 126(3), 1053–1060. https://doi.org/10.1002/app.36635 Allen, R., Parrish, E., Cassill, N. L., & Oxenham, W. (2012). Assessing the validity of a niche strategy model in predicting the potential and success of niche markets and products. JOURNAL OF THE TEXTILE INSTITUTE, 103(8), 900–911. https://doi.org/10.1080/00405000.2011.627156 Aykut, Y., Saquing, C. D., Pourdeyhimi, B., Parsons, G. N., & Khan, S. A. (2012). Templating Quantum Dot to Phase-Transformed Electrospun TiO2 Nanofibers for Enhanced Photo-Excited Electron Injection. ACS APPLIED MATERIALS & INTERFACES, 4(8), 3837–3845. https://doi.org/10.1021/am300524a Farukh, F., Demirci, E., Sabuncuoglu, B., Acar, M., Pourdeyhimi, B., & Silberschmidt, V. V. (2012, November). Numerical modelling of damage initiation in low-density thermally bonded nonwovens. COMPUTATIONAL MATERIALS SCIENCE, Vol. 64, pp. 112–115. https://doi.org/10.1016/j.commatsci.2012.05.038 Lin, J., Shamey, R., & Hinks, D. (2012). Factors affecting the whiteness of optically brightened material. JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION, 29(11), 2289–2299. https://doi.org/10.1364/josaa.29.002289 Zhang, X., Ji, L., Lin, Z., Li, Y., Shao, J. H., & Fan, Q. G. (2012). Designing Energy-Storage Devices from Textile Materials. ECO-DYEING, FINISHING AND GREEN CHEMISTRY, Vol. 441, pp. 231–234. https://doi.org/10.4028/www.scientific.net/amr.441.231 Zhang, S., Lu, Y., Xu, G., Li, Y., & Zhang, X. (2012). LiF/Fe/C nanofibres as a high-capacity cathode material for Li-ion batteries. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 45(39). https://doi.org/10.1088/0022-3727/45/39/395301 Zhou, C., Li, M., Garcia, R., Crawford, A., Beck, K., Hinks, D., & Griffis, D. P. (2012). Time-of-Flight-Secondary Ion Mass Spectrometry Method Development for High-Sensitivity Analysis of Acid Dyes in Nylon Fibers. ANALYTICAL CHEMISTRY, 84(22), 10085–10090. https://doi.org/10.1021/ac3025569 Gu, M., Li, Y., Li, X., Hu, S., Zhang, X., Xu, W., … Wang, C. (2012). In Situ TEM Study of Lithiation Behavior of Silicon Nanoparticles Attached to and Embedded in a Carbon Matrix. ACS NANO, 6(9), 8439–8447. https://doi.org/10.1021/nn303312m Hubbe, M. A., Beck, K. R., O'Neal, W. G., & Sharma, Y. C. (2012). [Review of Cellulosic substrates for removal of pollutants from aqueous systems: A review. 2. dyes]. BioResources, 7(2), 2592-. https://doi.org/10.15376/biores.7.2.2592-2687 Vitchuli, N., Shi, Q., Nowak, J., Nawalakhe, R., Sieber, M., Bourham, M., … Zhang, X. (2012). Plasma-Electrospinning Hybrid Process and Plasma Pretreatment to Improve Adhesive Properties of Nanofibers on Fabric Surface. PLASMA CHEMISTRY AND PLASMA PROCESSING, 32(2), 275–291. https://doi.org/10.1007/s11090-011-9341-0 Toprakci, O., Toprakci, H. A. K., Ji, L., Lin, Z., Gu, R., & Zhang, X. (2012, January 1). LiFePO4 nanoparticles encapsulated in graphene-containing carbon nanofibers for use as energy storage materials. JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, Vol. 4. https://doi.org/10.1063/1.3690936 Sahu, R. P., Sinha-Ray, S., Yarin, A. L., & Pourdeyhimi, B. (2012). Drop impacts on electrospun nanofiber membranes. SOFT MATTER, 8(14), 3957–3970. https://doi.org/10.1039/c2sm06744g Toprakci, O., Toprakci, H. A. K., Ji, L., Xu, G., Lin, Z., & Zhang, X. (2012). Carbon Nanotube-Loaded Electrospun LiFePO4/Carbon Composite Nanofibers As Stable and Binder-Free Cathodes for Rechargeable Lithium-Ion Batteries. ACS APPLIED MATERIALS & INTERFACES, 4(3), 1273–1280. https://doi.org/10.1021/am201527r Roe, B., Kotek, R., & Zhang, X. (2012). Durable hydrophobic cotton surfaces prepared using silica nanoparticles and multifunctional silanes. JOURNAL OF THE TEXTILE INSTITUTE, 103(4), 385–393. https://doi.org/10.1080/00405000.2011.580540 Ji, L., Toprakci, O., Alcoutlabi, M., Yao, Y., Li, Y., Zhang, S., … Zhang, X. (2012). alpha-Fe2O3 Nanoparticle-Loaded Carbon Nanofibers as Stable and High-Capacity Anodes for Rechargeable Lithium-Ion Batteries. ACS APPLIED MATERIALS & INTERFACES, 4(5), 2672–2679. https://doi.org/10.1021/am300333s Khansari, S., Sinha-Ray, S., Yarin, A. L., & Pourdeyhimi, B. (2012). Stress-strain dependence for soy-protein nanofiber mats. JOURNAL OF APPLIED PHYSICS, 111(4). https://doi.org/10.1063/1.3682757 Dasdemir, M., Maze, B., Anantharamaiah, N., & Pourdeyhimi, B. (2012). Influence of polymer type, composition, and interface on the structural and mechanical properties of core/sheath type bicomponent nonwoven fibers. JOURNAL OF MATERIALS SCIENCE, 47(16), 5955–5969. https://doi.org/10.1007/s10853-012-6499-7 Ji, L., Lin, Z., Alcoutlabi, M., Toprakci, O., Yao, Y., Xu, G., … Zhang, X. (2012). Electrospun carbon nanofibers decorated with various amounts of electrochemically-inert nickel nanoparticles for use as high-performance energy storage materials. RSC ADVANCES, 2(1), 192–198. https://doi.org/10.1039/c1ra00676b Hussain, M., Shamey, R., Hinks, D., El-Shafei, A., & Ali, S. I. (2012). Synthesis of novel stilbene-alkoxysilane fluorescent brighteners, and their performance on cotton fiber as fluorescent brightening and ultraviolet absorbing agents. DYES AND PIGMENTS, 92(3), 1231–1240. https://doi.org/10.1016/j.dyepig.2011.06.034 Yin, Y., Gao, M., Pan, H., Shen, L., Ye, X., Liu, Y., … Zhang, X. (2012). High-rate capability of LiFePO4 cathode materials containing Fe2P and trace carbon. JOURNAL OF POWER SOURCES, 199, 256–262. https://doi.org/10.1016/j.jpowsour.2011.10.042 Jung, K.-H., Pourdeyhimi, B., & Zhang, X. (2012). Selective Permeation of Cross-Linked Polyelectrolyte and Polyelectrolyte-Filled Nonwoven Membranes. JOURNAL OF APPLIED POLYMER SCIENCE, 123(1), 227–233. https://doi.org/10.1002/app.34453