TY - CHAP
TI - On the design of optimal TDM schedules for broadcast WDM networks with arbitrary transceiver tuning latencies
AU - Rouskas, GN
AU - Sivaraman, V
AU - IEEE
T2 - Ieee Infocom '96 - Fifteenth Annual Joint Conference of the Ieee Computer and Communications Societies: Networking the Next Generation, Proceedings Vols 1-3
PY - 1996///
SP - 1217-1224
PB -
SE -
ER -
TY - CHAP
TI - Multicast routing with end-to-end delay and delay variation constraints
AU - Rouskas, GN
AU - Baldine, I
AU - IEEE
T2 - Ieee Infocom '96 - Fifteenth Annual Joint Conference of the Ieee Computer and Communications Societies: Networking the Next Generation, Proceedings Vols 1-3
PY - 1996///
SP - 353-360
PB -
SE -
ER -
TY - JOUR
TI - Minimizing delay and packet loss in single-hop lightwave WDM networks using TDMA schedules
AU - Rouskas, GN
AU - Ammar, MH
T2 - Journal of High Speed Networks
DA - 1996///
PY - 1996///
VL - 5
IS - 4
SP - 309-327
ER -
TY - SOUND
TI - Schedule of Entry by analysis Area for the Nantahala/Pisgah National Forests, National Forests in North Carolina
AU - Hayden, L.
AU - Roise, J.P.
DA - 1996///
PY - 1996///
ER -
TY - CONF
TI - Production Planning with Product Recovery and Remanufacturing
AU - Uzsoy, R.
AU - Venkatachalam, G.
T2 - INFORMS National Meeting
C2 - 1996/10//
CY - Atlanta, GA
DA - 1996/10//
PY - 1996/10//
ER -
TY - CONF
TI - Scheduling Semiconductor Burn-In Operations in the Presence of Resource Constraints
AU - Uzsoy, R.
AU - Wang, C.S.
T2 - INFORMS National Meeting
C2 - 1996/10//
CY - Atlanta, GA
DA - 1996/10//
PY - 1996/10//
ER -
TY - SOUND
TI - Shop Floor Control for Semiconductor Manufacturing Facilities
AU - Uzsoy, R.
DA - 1996/1//
PY - 1996/1//
ER -
TY - SOUND
TI - Shop Floor Control for Semiconductor Manufacturing Facilities
AU - Uzsoy, R.
DA - 1996/3//
PY - 1996/3//
ER -
TY - SOUND
TI - Shop Floor Control for Semiconductor Manufacturing Facilities
AU - Uzsoy, R.
DA - 1996/4//
PY - 1996/4//
ER -
TY - SOUND
TI - Global Scheduling Procedures for Semiconductor Manufacturing Facilities
AU - Uzsoy, R.
DA - 1996/7//
PY - 1996/7//
ER -
TY - SOUND
TI - Shop Floor Control for Semiconductor Manufacturing Facilities
AU - Uzsoy, R.
DA - 1996/10//
PY - 1996/10//
ER -
TY - SOUND
TI - Decomposition Methods for Scheduling Complex Job Shops
AU - Uzsoy, R.
DA - 1996/10//
PY - 1996/10//
ER -
TY - CONF
TI - Supply Chain Coordination in the Presence of Remanufacturing
AU - Uzsoy, R.
AU - Clegg, A.
AU - Williams, D.J.
AU - Venkatadri, U.
AU - Venkatachalam, G.
T2 - INFORMS National Meeting
C2 - 1996/5//
CY - Washington DC
DA - 1996/5//
PY - 1996/5//
ER -
TY - CONF
TI - Determining Disassembly Configurations in Remanufacturing
AU - Uzsoy, R.
AU - Venkatadri, U.
T2 - INFORMS National Meeting
C2 - 1996/5//
CY - Washington DC
DA - 1996/5//
PY - 1996/5//
ER -
TY - CONF
TI - Minimizing Makespan for Scheduling Semiconductor Burn-In Operations with Different Arrival Times
AU - Lee, C.Y.
AU - Uzsoy, R.
T2 - INFORMS National Meeting
C2 - 1996/5//
CY - Washington DC
DA - 1996/5//
PY - 1996/5//
ER -
TY - CONF
TI - Integrating Optimum Estimation with Simulated Annealing for a Single Machine Scheduling Problem
AU - Uzsoy, R.
AU - Rajagopalan, S.
AU - Ovacik, I.M.
T2 - INFORMS National Meeting
C2 - 1996/5//
CY - Washington DC
DA - 1996/5//
PY - 1996/5//
ER -
TY - JOUR
TI - Genetic analysis of a morphological shape difference in the male genitalia of Drosophila simulans and D. mauritiana
AU - Liu, J.
AU - Mercer, J.M.
AU - Stam, L.F.
AU - Gibson, G.C.
AU - Zeng, Z.-B.
AU - Laurie, C.C.
T2 - Genetics
AB - Abstract Two closely related species of Drosophila, D. simulans and D. mauritiana, differ markedly in morphology of the posterior lobe of the male genital arch. Both size and shape aspects of lobe variation can be quantified by a morphometric descriptor based on elliptical Fourier and principal components analyses. The genetic architecture of this quantitative trait (PC1) was investigated by hybridizing inbred lines to produce two backcross populations of ~200 individuals each, which were analyzed jointly by a composite interval mapping procedure with the aid of 18 marker loci. The parental lines show a large difference in PC1 (30.4 environmental standard deviations), and the markers account for >80% of the phenotypic variation in backcross populations. Eight of 15 intervals analyzed show convincing evidence of quantitative trait loci (QTL), and the range of estimated QTL effects is 5.7–15.9% of the parental difference (1.7–4.8 environmental standard deviations). These estimates may represent the joint effects of multiple QTL within a single interval (which averaged 23 cM in length). Although there is some evidence of partial dominance of mauritiana alleles and for epistasis, the pattern of inheritance is largely additive.
DA - 1996/4//
PY - 1996/4//
DO - 10.1093/genetics/142.4.1129
VL - 142
IS - 4
SP - 1129–1145
ER -
TY - JOUR
TI - Design III with marker loci
AU - Cockerham, C.C.
AU - Zeng, Z.-B.
T2 - Genetics
AB - Abstract Design III is an experimental design originally proposed by R. E. Comstock and H. F. Robinson for estimating genetic variances and the average degree of dominance for quantitative trait loci (QTL) and has recently been extended for mapping QTL. In this paper, we first extend Comstock and Robinson's analysis of variance to include linkage, two-locus epistasis and the use of F 3 parents. Then we develop the theory and statistical analysis of orthogonal contrasts and contrast × environment interaction for a single marker locus to characterize the effects of QTL. The methods are applied to the maize data of C. W. Stuber. The analyses strongly suggest that there are multiple linked QTL in many chromosomes for several traits examined. QTL effects are largely environment-independent for grain yield, ear height, plant height and ear leaf area and largely environment dependent for days to tassel, grain moisture and ear number. There is significant QTL epistasis. The results are generally in favor of the hypothesis of dominance of favorable genes to explain the observed heterosis in grain yield and other traits, although epistasis could also play an important role and overdominance at individual QTL level can not be ruled out.
DA - 1996/7/1/
PY - 1996/7/1/
DO - 10.1093/genetics/143.3.1437
VL - 143
IS - 3
SP - 1437–1456
ER -
TY - JOUR
TI - Statistical methods for mapping quantitative trait loci
AU - Zeng, Z.-B.
AU - Weir, B.S.
T2 - Acta Agronomica Sinica
DA - 1996///
PY - 1996///
VL - 22
SP - 535–549
ER -
TY - CONF
TI - Yield of silicon selective epitaxial growth and its role in the production planning and control of three-dimensional semiconductor devices
AU - Chen, S.
AU - Takoudis, C.
AU - Uzsoy, R.
T2 - Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium
AB - We focus on the yield (Y) and growth rate (G) of silicon selective epitaxial growth (SEG) at 820 to 970/spl deg/C, and pressures between 40 and 150 Torr. Since the yield of silicon SEG is a potential bottleneck in the manufacture of three-dimensional integrated circuits, e.g., 3-D CMOS, basic knowledge of Y and its dependence on operating conditions, substrate surface parameters, and processing time is of key importance. The conditions investigated include deposition temperature, deposition pressure, SEG thickness, processing time, seed window area, distance between seed windows (local seed window density), and feed composition. The yield is found to improve with higher deposition temperatures, higher HCl feed flows, shorter processing times, higher Cl/H feed ratios, and lower Si/Cl feed ratios. The seed window area and distance between seed windows do not appear to affect the yield at the conditions studied. Growth rate uniformity is observed to improve with lower pressure and temperature, longer processing times, lower HCl feed concentrations, higher Si/Cl feed ratios, and lower Cl/H feed ratios. The implications of these observations for production planning and control of such facilities are discussed.
C2 - 1996///
C3 - Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium
DA - 1996///
PY - 1996/10//
DO - 10.1109/iemt.1996.559732
PB - IEEE
UR - http://dx.doi.org/10.1109/iemt.1996.559732
ER -
TY - CONF
TI - Quantifying the benefits of cycle time reduction in semiconductor wafer fabrication
AU - Nemoto, K.
AU - Akcali, E.
AU - Uzsoy, R.
T2 - Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium
AB - In recent years, semiconductor manufacturing has become extremely complex due to device size reduction. Hence the manufacturing cycle time, also called turn around time (TAT), which is defined as the time required from wafer input through probing test, becomes longer year by year. This renders the delay between process defect occurrence and detection a significant problem. On the other hand, customer demands for faster delivery are increasing because their product life cycles are getting shorter. Therefore, TAT reduction is important for semiconductor manufacturers not only to satisfy customer requirements, but also to remain competitive in their market. This paper examines the financial benefits of TAT reduction using stochastic simulation.
C2 - 1996///
C3 - Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium
DA - 1996///
PY - 1996/10//
DO - 10.1109/iemt.1996.559705
SP - 130–136
PB - IEEE
UR - http://dx.doi.org/10.1109/iemt.1996.559705
ER -
TY - CONF
TI - Effects of dispatching and down time on the performance of wafer fabs operating under theory of constraints
AU - Kayton, D.
AU - Teyner, T.
AU - Schwartz, C.
AU - Uzsoy, R.
T2 - Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium
AB - A number of companies have reported significant improvements in manufacturing performance through implementing the concepts of the Theory of Constraints suggested by Goldratt (1986). However, the implementation of these concepts in wafer fabs is not straightforward due to the presence of reentrant product flows. In this paper we examine the effects of downtime at non-bottleneck machines and different dispatching rules on the performance of a wafer fab operating under the Drum-Buffer-Rope release policy (Goldratt and Fox 1986). Our results show that downtime at non-bottleneck machines has significant detrimental effects on fab performance, and that the Critical Ratio dispatching rule performs well in terms of the tradeoff between cycle time and throughput.
C2 - 1996///
C3 - Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium
DA - 1996///
PY - 1996/10//
DO - 10.1109/iemt.1996.559681
PB - IEEE
UR - http://dx.doi.org/10.1109/iemt.1996.559681
ER -
TY - JOUR
TI - Decomposition methods for scheduling semiconductor testing facilities
AU - Ovacik, IrfanM.
AU - Uzsoy, Reha
T2 - International Journal of Flexible Manufacturing Systems
DA - 1996/10//
PY - 1996/10//
DO - 10.1007/bf00170018
VL - 8
IS - 4
J2 - Int J Flex Manuf Syst
LA - en
OP -
SN - 0920-6299 1572-9370
UR - http://dx.doi.org/10.1007/bf00170018
DB - Crossref
ER -
TY - JOUR
TI - Single-machine scheduling with dynamic arrivals: Decomposition results and an improved algorithm
AU - Chand, Suresh
AU - Traub, Rodney
AU - Uzsoy, Reha
T2 - Naval Research Logistics
AB - This article considers the single-machine dynamic scheduling problem where the jobs have different arrival times and the objective is to minimize the sum of completion times. This problem is known to be strongly NP-hard. We develop decomposition results for this problem such that a large problem can be solved by combining optimal solutions for several smaller problems. The decomposition results can be used with any implicit enumeration method to develop an optimal algorithm. Our computational experiment indicates that the computational efficiency of the currently best available branch-and-bound algorithm can be improved with the use of our decomposition results. © 1996 John Wiley & Sons, Inc.
DA - 1996/8//
PY - 1996/8//
DO - 10.1002/(sici)1520-6750(199608)43:5<709::aid-nav7>3.0.co;2-9
VL - 43
IS - 5
SP - 709-719
J2 - Naval Research Logistics
LA - en
OP -
SN - 0894-069X 1520-6750
UR - http://dx.doi.org/10.1002/(sici)1520-6750(199608)43:5<709::aid-nav7>3.0.co;2-9
DB - Crossref
ER -
TY - JOUR
TI - An iterative heuristic for the single machine dynamic total completion time scheduling problem
AU - Chand, Suresh
AU - Traub, Rodney
AU - Uzsoy, Reha
T2 - Computers & Operations Research
AB - We address the problem of scheduling a single machine to minimize the total completion time in the face of dynamic job arrivals. Since the problem is strongly NP-hard, considerable research has been devoted to examining one-pass heuristic procedures for this problem. In this paper we present an iterative improvement heuristic which operates by modifying the problem data in a manner that allows one-pass heuristics to generate improved solutions. Computational experiments show that the procedure obtains significant improvements over a variety of one-pass heuristics in modest CPU times.
DA - 1996/7//
PY - 1996/7//
DO - 10.1016/0305-0548(95)00071-2
VL - 23
IS - 7
SP - 641-651
J2 - Computers & Operations Research
LA - en
OP -
SN - 0305-0548
UR - http://dx.doi.org/10.1016/0305-0548(95)00071-2
DB - Crossref
ER -
TY - JOUR
TI - Machine Criticality Measures and Subproblem Solution Procedures in Shifting Bottleneck Methods: A Computational Study
AU - Holtsclaw, Harry H.
AU - Uzsoy, Reha
T2 - The Journal of the Operational Research Society
DA - 1996/5//
PY - 1996/5//
DO - 10.2307/3010017
VL - 47
IS - 5
SP - 666
J2 - The Journal of the Operational Research Society
OP -
SN - 0160-5682
UR - http://dx.doi.org/10.2307/3010017
DB - Crossref
ER -
TY - JOUR
TI - Neural network scheduling of a flexible manufacturing cell using dynamic process plans
AU - Houck, C.R.
AU - Culbreth, C.T.
AU - King, R.E.
T2 - International Journal of Flexible Automation and Integrated Manufacturing
DA - 1996///
PY - 1996///
VL - 4
IS - 3-4
SP - 213–229
ER -
TY - JOUR
TI - Constraint Preserving Integrators for Unstructured Higher Index DAEs
AU - Campbell, Stephen L.
AU - Moore, E.
AU - Zhong, Y.
T2 - Zeitschrift fuer Angewandte Mathematik und Mechanik (ZAMM)
DA - 1996///
PY - 1996///
SP - 83–86
ER -
TY - CONF
TI - Pencil algorithms and observer design
AU - Campbell, Stephen L.
AU - Delebecque, F.
AU - Nikoukhah, R.
T2 - IEEE Symposium on Computer-Aided Control System Design
C2 - 1996///
C3 - Proceedings of the 1996 IEEE International Symposium on Computer-Aided Control System Design (CACSD)
CY - Dearborn, Michigan
DA - 1996///
PY - 1996/9/15/
SP - 83–88
PB - Institute of Electrical and Electronics Engineers
SN - 9780780330320 9780780330337
ER -
TY - CONF
TI - Descriptor predictive control: tracking controllers for a riderless bicycle
AU - Campbell, Stephen L.
AU - von Wissel, D.
AU - Nikoukhah, R.
AU - Delebecque, F.
C2 - 1996///
C3 - Proceedings of Computational Engineering in Systems Applications
DA - 1996///
SP - 292–297
ER -
TY - CONF
TI - Nonlinear observer design using implicit system descriptions
AU - Campbell, Stephen L.
AU - von Wissel, D.
AU - Nikoukhah, R.
AU - Delebecque, F.
A2 - Wissel, Stephen L.Campbell
A2 - Nikoukhah, R.
A2 - Delebecque, F.
C2 - 1996///
C3 - Proceedings of Computational Engineering in Systems Applications
DA - 1996///
SP - 404–409
ER -
TY - BOOK
TI - COW Users Manual
AU - Roise, J.P.
AU - Jerger, E.
DA - 1996///
PY - 1996///
PB - Winrock International
ER -
TY - RPRT
TI - COW - Cost of Wood Products, A software program for use in Secondary Wood Products Manufacturing
AU - Roise, J.P.
AU - Jerger, E.
A3 - Winrock International
DA - 1996///
PY - 1996///
M3 - Software
PB - Winrock International
ER -
TY - CONF
TI - Spatially explicit multi-objecitve analysis for timber and wildlife
AU - Hughell, D.A.
AU - Roise, J.P.
T2 - 1996 Society of American Foresters Convention
C2 - 1996///
CY - Albuquerque, NM
DA - 1996///
PY - 1996///
ER -
TY - RPRT
TI - Soil Recovery and Regeneration of a Wetland Site One-Year After Harvest
AU - Hassan, A.E.
AU - Roise, J.P.
A3 - ASAE
DA - 1996///
PY - 1996///
M1 - 965002
M3 - American Society of Agricultural Engineers Paper
PB - ASAE
SN - 965002
ER -
TY - JOUR
TI - Just-in-Time Production Planning with Semi-Infinite Programming and Genetic Algorithms
AU - Fang, S.
AU - Wang, D.W.
T2 - Journal of Control and Decision
DA - 1996///
PY - 1996///
VL - 11
SP - 446 –451
ER -
TY - JOUR
TI - An efficient computational procedure for solving entropy optimization problems with infinitely many linear constraints
AU - Fang, Shu-Cherng
AU - Tsao, H.-S. Jacob
T2 - Journal of Computational and Applied Mathematics
AB - A cutting-plane type algorithm for solving entropy optimization problems with a finite number of variables but an infinite number of linear constraints is proposed in this paper. In each iteration, we solve a finite entropy optimization problem and add one more constraint. The iterative process ends when an optimal solution is identified. A convergence proof, under some mild conditions, is given. An efficient implementation based on a dual approach is also included. Our preliminary computational experience confirms the efficiency of the proposed method and shows its potential for solving large-scale problems.
DA - 1996/7//
PY - 1996/7//
DO - 10.1016/0377-0427(95)00266-9
VL - 72
IS - 1
SP - 127–139
SN - 0377-0427
UR - http://dx.doi.org/10.1016/0377-0427(95)00266-9
KW - linearly-constrained entropy optimization
KW - infinite constraint set
KW - cutting-plane method
KW - duality
ER -
TY - JOUR
TI - Parametric linear semi-infinite programming
AU - Lin, C.-J.
AU - Fang, S.-C.
AU - Wu, Soon-Yi
T2 - Applied Mathematics Letters
AB - By using the theory of parametric semi-infinite programming, we show that the solution of a linear semi-infinite programming problem can be obtained by solving a sequence of optimization problems with a single constraint.
DA - 1996/5//
PY - 1996/5//
DO - 10.1016/0893-9659(96)00038-9
VL - 9
IS - 3
SP - 89-96
J2 - Applied Mathematics Letters
LA - en
OP -
SN - 0893-9659
UR - http://dx.doi.org/10.1016/0893-9659(96)00038-9
DB - Crossref
KW - semi-infinite programming
KW - linear programming
KW - convex programming
ER -
TY - JOUR
TI - A dual perturbation view of linear programming
AU - Fang, Shu-Cherng
AU - Tsao, H. -S. Jacob
T2 - Mathematical Methods of Operations Research
DA - 1996/2//
PY - 1996/2//
DO - 10.1007/bf01246326
VL - 44
IS - 1
SP - 1-9
J2 - Mathematical Methods of Operations Research
LA - en
OP -
SN - 1432-2994 1432-5217
UR - http://dx.doi.org/10.1007/bf01246326
DB - Crossref
ER -
TY - JOUR
TI - Solving min-max problems and linear semi-infinite programs
AU - Fang, S.-C.
AU - Wu, Soon-Yi
T2 - Computers & Mathematics with Applications
AB - For a min-max problem in the form of minx∈X maxt∈T {ft(x)}, the nondifferentiability of the max function F(x) ≡ maxt∈T {ft(x)} presents special difficulty in finding optimal solutions. We show that an entropic regularization procedure can provide a smooth approximation Fp(x) that uniformly converges to F(x) over X, as p tends to infinity. In this way, with p being sufficiently large, minimizing the smooth function Fp(x) over X provides a very accurate approximate solution to the min-max problem. When this approach is applied to solve linear semi-infinite programming problems, the previously proposed “unconstrained convex programming approach” is shown to be a special case.
DA - 1996/9//
PY - 1996/9//
DO - 10.1016/0898-1221(96)00145-9
VL - 32
IS - 6
SP - 87-93
J2 - Computers & Mathematics with Applications
LA - en
OP -
SN - 0898-1221
UR - http://dx.doi.org/10.1016/0898-1221(96)00145-9
DB - Crossref
KW - min-max problem
KW - linear semi-infinite programming
KW - convex programming
KW - entropy optimization
ER -
TY - JOUR
TI - Solving Linear Programs With Inequality Constraints Via Perturbation of Feasible Region
AU - Fang, Shu-Cherng.
AU - Tsao, H.S. Jacob
T2 - Optimization
AB - Solving a linear programming problem by perturbing its primal objective functiun with a barrier or penalty function for the development of interior-point methods has attracted much attention recently. However, the idea of perturbing the feasible region has not been fully explored. In this paper , we propose such an approach. Given a linear program with inequality constraints, aperturbed feasible region based on a measure of “constraint violation” in l p-norm is defined . Th e optimal so lution to the perturbed program is shown to converge to an optimal solution of the given linear program as the l p-norm tends to the l ∞, -norm. A simple formula which converts the optimal solution of a perturbed program to a dual feasible solution, which in turn converges to a dual optimal solution, of the given linear program is provided . In addition, an e-optimality theory that specifies the perturbation parameter in terms of required accuracy level e and other program parameters is studied
DA - 1996/1//
PY - 1996/1//
DO - 10.1080/02331939608844214
VL - 37
IS - 3
SP - 213–223
SN - 0233-1934 1029-4945
UR - http://dx.doi.org/10.1080/02331939608844214
ER -
TY - JOUR
TI - On the entropic perturbation and exponential penalty methods for linear programming
AU - Fang, S. C.
AU - Tsao, H. S. J.
T2 - Journal of Optimization Theory and Applications
DA - 1996/5//
PY - 1996/5//
DO - 10.1007/bf02192539
VL - 89
IS - 2
SP - 461-466
J2 - J Optim Theory Appl
LA - en
OP -
SN - 0022-3239 1573-2878
UR - http://dx.doi.org/10.1007/bf02192539
DB - Crossref
KW - linear programming
KW - penalty function method
KW - barrier function method
KW - path-following method
ER -
TY - JOUR
TI - A relaxed primal-dual path-following algorithm for linear programming
AU - Hwang, Tsung-Min
AU - Lin, Chih-Hung
AU - Lin, Wen-Wei
AU - Fang, Shu-Cherng
T2 - Annals of Operations Research
DA - 1996/12//
PY - 1996/12//
DO - 10.1007/bf02206816
VL - 62
IS - 1
SP - 173-196
J2 - Ann Oper Res
LA - en
OP -
SN - 0254-5330 1572-9338
UR - http://dx.doi.org/10.1007/bf02206816
DB - Crossref
KW - linear programming
KW - primal-dual method
KW - interior path-following algorithm
KW - relaxation method
ER -
TY - JOUR
TI - A semi-infinite programming model for earliness/tardiness production planning with a genetic algorithm
AU - Wang, Dingwei
AU - Fang, S.-C.
T2 - Computers & Mathematics with Applications
AB - To closely describe the earliness/tardiness production planning problems in the JIT environment, a nonlinear semi-infinite programming model is proposed. Due to the issues of non-convexivity and having infinitely many constraints, instead of applying traditional optimization approaches, a specially designed genetic algorithm with mutation along the negative gradient direction is developed. The proposed algorithm is a combination of the steepest descent method with the stochastic sampling algorithm. Some numerical results are included to show its potential for industrial applications.
DA - 1996/4//
PY - 1996/4//
DO - 10.1016/0898-1221(96)00034-x
VL - 31
IS - 8
SP - 95-106
J2 - Computers & Mathematics with Applications
LA - en
OP -
SN - 0898-1221
UR - http://dx.doi.org/10.1016/0898-1221(96)00034-x
DB - Crossref
KW - production planning
KW - earliness/tardiness schedule
KW - genetic algorithm
KW - semi-infinite programming
ER -
TY - JOUR
TI - Linear programming with inequality constraints via entropic perturbation
AU - Tsao, H.-S. Jacob
AU - Fang, Shu-Cherng
T2 - International Journal of Mathematics and Mathematical Sciences
AB - A dual convex programming approach to solving linear programs with inequality constraints through entropic perturbation is derived. The amount of perturbation required depends on the desired accuracy of the optimum. The dual program contains only non-positivity constraints. Anϵ-optimal solution to the linear program can be obtained effortlessly from the optimal solution of the dual program. Since cross-entropy minimization subject to linear inequality constraints is a special case of the perturbed linear program, the duality result becomes readily applicable. Many standard constrained optimization techniques can be specialized to solve the dual program. Such specializations, made possible by the simplicity of the constraints, significantly reduce the computational effort usually incurred by these methods. Immediate applications of the theory developed include an entropic path-following approach to solving linear semi-infinite programs with an infinite number of inequality constraints and the widely used entropy optimization models with linear inequality and/or equality constraints.
DA - 1996///
PY - 1996///
DO - 10.1155/s0161171296000257
VL - 19
IS - 1
SP - 177-184
J2 - International Journal of Mathematics and Mathematical Sciences
LA - en
OP -
SN - 0161-1712 1687-0425
UR - http://dx.doi.org/10.1155/s0161171296000257
DB - Crossref
ER -
TY - CHAP
TI - A history of inverse iteration
AU - Ipsen, I.C.F.
T2 - Mathematische Werke. Vol. 2, Linear algebra and analysis : Mathematical works
A2 - Wielandt, H.
A2 - Huppert, B.
A2 - Schneider, H.
PY - 1996///
SP - 464–472
PB - Walter de Gruyter
SN - 9783110124538
ER -
TY - CONF
TI - `Green' supply chain: Best practices from the furniture industry
AU - Handfield, Robert B.
AU - Walton, Steve V.
AU - Goizueta, Roberto C.
AU - Seegers, Lisa K.
AU - Melnyk, Steven A.
C2 - 1996///
C3 - Proceedings - Annual Meeting of the Decision Sciences Institute
DA - 1996///
VL - 3
SP - 1295-1297
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0030363766&partnerID=MN8TOARS
ER -
TY - CONF
TI - Success factors for integrating suppliers into new product development
AU - Ragatz, Gary L.
AU - Handfield, Robert B.
AU - Scannell, Thomas V.
C2 - 1996///
C3 - Proceedings - Annual Meeting of the Decision Sciences Institute
DA - 1996///
VL - 3
SP - 1442-1444
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0030349915&partnerID=MN8TOARS
ER -
TY - CONF
TI - Recent trends in operations management research
AU - Walton, Steve V.
AU - Handfield, Robert B.
C2 - 1996///
C3 - Proceedings - Annual Meeting of the Decision Sciences Institute
DA - 1996///
VL - 3
SP - 1290
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0030359176&partnerID=MN8TOARS
ER -
TY - CONF
TI - Integrating environmental concerns into the design process
AU - Melnyk, Steven A.
AU - Handfield, Robert
AU - Calantone, Roger J.
AU - Curkovic, Sime
C2 - 1996///
C3 - Proceedings - Annual Meeting of the Decision Sciences Institute
DA - 1996///
VL - 3
SP - 1301-1303
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0030354561&partnerID=MN8TOARS
ER -
TY - CONF
TI - Importance of unions to operations strategy
AU - Pagell, Mark
AU - Handfield, Robert
C2 - 1996///
C3 - Proceedings - Annual Meeting of the Decision Sciences Institute
DA - 1996///
VL - 3
SP - 1359-1361
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0030366014&partnerID=MN8TOARS
ER -
TY - CONF
TI - Environmentally responsible manufacturing: Research issues and opportunities
AU - Melnyk, Steven A.
AU - Handfield, Robert B.
C2 - 1996///
C3 - Proceedings - Annual Meeting of the Decision Sciences Institute
DA - 1996///
VL - 3
SP - 1331
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0030372360&partnerID=MN8TOARS
ER -
TY - CONF
TI - Empirical study of the impact of quality tools and techniques on quality attributes and quality strategies
AU - Jayaram, Jayanth
AU - Handfield, Robert
AU - Ghosh, Soumen
C2 - 1996///
C3 - Proceedings - Annual Meeting of the Decision Sciences Institute
DA - 1996///
VL - 3
SP - 1664
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0030374262&partnerID=MN8TOARS
ER -
TY - CONF
TI - Does the parallel approach make sense in the development of discontinuous innovations?
AU - McDermott, Christopher
AU - Handfield, Robert
C2 - 1996///
C3 - IEEE International Engineering Management Conference
DA - 1996///
SP - 370-374
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0029767091&partnerID=MN8TOARS
ER -
TY - CONF
TI - Scientific Workflows: Scientific Computing Meets Transactional Workflows
AU - Singh, Munindar P.
AU - Vouk, Mladen A.
T2 - NSF Workshop on Workflow and Process Automation in Information Systems
C2 - 1996/5//
C3 - Proceedings of the National Science Foundation Workshop on Workflow and Process Automation in Information Systems: State-of-the-Art and Future Directions
CY - Athens, GA
DA - 1996/5//
PY - 1996/5//
UR - http://www.csc.ncsu.edu/faculty/mpsingh/workflows/sciworkflows.html
ER -
TY - CONF
TI - Multiagent Systems as Spheres of Commitment
AU - Singh, Munindar P.
C2 - 1996/12//
C3 - Proceedings of the International Conference on Multiagent Systems (ICMAS) Workshop on Norms, Obligations, and Conventions
DA - 1996/12//
SP - 1–13
ER -
TY - CHAP
TI - Carnot Prototype
AU - Woelk, Darrell
AU - Cannata, Philip
AU - Huhns, Michael N.
AU - Jacobs, Nigel
AU - Ksiezyk, Tomasz
AU - Lavender, Greg
AU - Meredith, Greg
AU - Ong, Kayliang
AU - Shen, Wei-Min
AU - Singh, Munindar
AU - Tomlinson, Christine
T2 - Object-Oriented Multidatabase Systems: A Solution for Advanced Applications
A2 - Bukhres, Omran A.
A2 - Elmagarmid, Ahmed K.
PY - 1996///
SP - 621-648
PB - Prentice-Hall
ER -
TY - BOOK
TI - Book review: ARCHON: An Architecture for Multi-agent Systems. Edited by Wittig, Thies (Ellis Horwood Limited (distributed by Prentice Hall), 1992)
AU - Singh, Munindar P.
AU - Wittig, Thies
AB - No abstract available.
DA - 1996/1/1/
PY - 1996/1/1/
DO - 10.1145/230062.1066045
VL - 7
PB - Association for Computing Machinery (ACM)
SE - 9–10
UR - http://dx.doi.org/10.1145/230062.1066045
ER -
TY - CONF
TI - A mixed symbolic-numeric software environment
AU - Campbell, S.L.
AU - Delebecque, F.
AU - von Wissel, D.
T2 - Joint Conference on Control Applications Intelligent Control and Computer Aided Control System Design
AB - This paper presents two nonlinear examples of mechanical systems. The first example is a simple inverted pendulum, the second example is a simplified bicycle model. In Maple, using the Euler Lagrange equations, we compute the equations of motion. We have shown how to use the interface to transfer the equations to Scilab for simulation or control. We have shown that for dealing with complex models, we need the full power of Maple to perform change of variables which cannot be automatized since they require a deep a priori knowledge of the model.
C2 - 1996///
C3 - Proceedings of Joint Conference on Control Applications Intelligent Control and Computer Aided Control System Design
DA - 1996///
DO - 10.1109/cacsd.1996.555331
PB - IEEE
SN - 0780330323
UR - http://dx.doi.org/10.1109/cacsd.1996.555331
ER -
TY - JOUR
TI - A note on immersed interface method for three-dimensional elliptic equations
AU - Li, Z.
T2 - Computers & Mathematics with Applications
AB - The Immersed Interface Method proposed by LeVeque and Li [1] is extended to three-dimensional elliptic equations of the form: ∇·(β(x)∇u(x))+κ(x)u(x)=f(x). We study the situation in which there is an irregular interface (surface) S contained in the solution domain across which β, κ and f may be discontinuous or even singular. As a result, the solution u will usually be nonsmooth or even discontinuous. A finite difference approach with a uniform Cartesian grid is used in the discretization. Local truncation error analysis is performed to estimate the accuracy of the numerical solution.
DA - 1996/2//
PY - 1996/2//
DO - 10.1016/0898-1221(95)00202-2
VL - 31
IS - 3
SP - 9-17
J2 - Computers & Mathematics with Applications
LA - en
OP -
SN - 0898-1221
UR - http://dx.doi.org/10.1016/0898-1221(95)00202-2
DB - Crossref
KW - 3D elliptic equation
KW - finite difference methods
KW - irregular interface
KW - discontinuous coefficients
KW - singular source term
KW - delta functions
KW - Cartesian grid
KW - immersed interface method
ER -
TY - JOUR
TI - Agents misunderstood
AU - Singh, M.P.
T2 - IEEE Spectrum
DA - 1996/2//
PY - 1996/2//
DO - 10.1109/mspec.1996.482270
VL - 33
IS - 2
SP - 10-64
J2 - IEEE Spectr.
OP -
SN - 0018-9235
UR - http://dx.doi.org/10.1109/mspec.1996.482270
DB - Crossref
ER -
TY - CHAP
TI - Semantical considerations on some primitives for agent specification
AU - Singh, Munindar P.
T2 - Intelligent Agents II Agent Theories, Architectures, and Languages
AB - Intelligent agents, invented in artificial intelligence (AI), are finding application in a number of traditional areas. Classical AI notions such as knowledge and intentions can serve as natural primitives for the specification of agents. However, in order for them to live up to their promise, these notions must be given rigorous definitions. We propose formal definitions for intentions, knowledge, and know-how in a general model of actions and time. Our definitions are conceptually simple and are designed to be modular, in the sense of being orthogonal to one another. Using these definitions, we are able to prove a success result for agents that is akin to the notion of liveness in traditional computing. Others have been able to prove similar results only with the support of rather strong additional assumptions.
PY - 1996///
DO - 10.1007/3540608052_58
SP - 49-64
OP -
PB - Springer Berlin Heidelberg
SN - 9783540608059 9783540495949
UR - http://dx.doi.org/10.1007/3540608052_58
DB - Crossref
ER -
TY - JOUR
TI - Multilayered fuzzy behavior fusion for real-time reactive control of systems with multiple sensors
AU - Goodridge, S.G.
AU - Kay, M.G.
AU - Luo, R.C.
T2 - IEEE Transactions on Industrial Electronics
AB - Fuzzy linguistic rules provide an intuitive and powerful means for defining control behavior. Most applications that use fuzzy control feature a single layer of fuzzy inference, mapping a function from one or two inputs to equally few outputs. Highly complex systems, with large numbers of inputs, may also benefit from the use of qualitative linguistic rules if the control task is properly partitioned. This paper presents a modular fuzzy control architecture and inference engine that can be used to control complex systems. The control function is broken down into multiple local agents, each of which samples a subset of a large sensor input space. Additional fuzzy agents are employed to fuse the recommendations of the local agents. Real-time implementation without special hardware is possible by using singleton output values during fuzzy rule evaluation. A development tool is used to translate a fuzzy programming language offline for fast execution at run time. Using this system, a multilayered fuzzy behavior fusion based reactive control system has been implemented on an autonomous mobile robot, MARGE, with great success. MARGE won first place in Event III of the 1993 Robot Competition sponsored by the American Association for Artificial Intelligence.
DA - 1996///
PY - 1996///
DO - 10.1109/41.499811
VL - 43
IS - 3
SP - 387-394
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0030172088&partnerID=MN8TOARS
ER -
TY - CONF
TI - Multimedia sensor fusion for intelligent camera control
AU - Goodridge, Steven G.
AU - Kay, Michael G.
C2 - 1996///
C3 - IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems
DA - 1996///
SP - 655-662
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0030411519&partnerID=MN8TOARS
ER -
TY - JOUR
TI - Demand Re-estimation and Inventory Replenishment of Basic Apparel in a Specialty Retail Chain
AU - King, R. E.
AU - Hunter, N. A.
T2 - Journal of the Textile Institute
AB - Store replenishment and distribution center reorder systems for year-round (Basic) apparel sold through a multi-store specialty chain are described. A stochastic computer simulation model is developed which allows investigation of the effects of a wide variety of system policies on DC and store inventories, sales performance and customer service levels.
DA - 1996/1//
PY - 1996/1//
DO - 10.1080/00405009608659100
VL - 87
IS - 1
SP - 31-41
J2 - Journal of the Textile Institute
LA - en
OP -
SN - 0040-5000 1754-2340
UR - http://dx.doi.org/10.1080/00405009608659100
DB - Crossref
ER -
TY - JOUR
TI - Evaluation of Traditional and Quick-response Retailing Procedures by Using a Stochastic Simulation Model
AU - Hunter, N. A.
AU - King, R. E.
AU - Nuttle, H. L.W.
T2 - Journal of the Textile Institute
AB - A stochastic computer-simulation model is used to quantify the retail-performance characteristics of traditional and quick-response (QR) procedures for seasonal and fashion apparel. The model allows exploration of the underlying differences between the two systems, including patterns of stockout, the impact of markdowns, and buyer-forecast error, as well as the limitations on QR effectiveness imposed by season length and the number of items offered per stock-keeping unit (SKU).
DA - 1996/1//
PY - 1996/1//
DO - 10.1080/00405009608659101
VL - 87
IS - 1
SP - 42-55
J2 - Journal of the Textile Institute
LA - en
OP -
SN - 0040-5000 1754-2340
UR - http://dx.doi.org/10.1080/00405009608659101
DB - Crossref
ER -
TY - JOUR
TI - Robustness studies for H∞ feedback control in a structural acoustic model with periodic excitation
AU - Banks, H. T.
AU - Demetriou, M. A.
AU - Smith, R. C.
T2 - International Journal of Robust and Nonlinear Control
AB - Results from an extensive study on the robustness of an H∞ compensator for a 2-D structural acoustic model are presented. The effects of frequency uncertainties in an exogenous signal are studied for both the case where the signal is contained in the controller formulation and the case where it is excluded. Delays are inserted in the input and/or output signals and their effect on the controller performance is recorded. A comparison between the standard LQG/Kalman filter and the H∞/Min-Max compensator reveals no significant differences in the overall controller performance. Modifications in the controller structure are studied to see whether loss of information (the tracking variable) that must be calculated a priori would result in performance degradation. This study provides valuable insight into the computational and implementational issues that arise when dealing with the control of large and complex systems that are governed by partial differential equations.
DA - 1996/6//
PY - 1996/6//
DO - 10.1002/(sici)1099-1239(199606)6:5<453::aid-rnc222>3.0.co;2-5
VL - 6
IS - 5
SP - 453-478
SN - 1049-8923 1099-1239
UR - http://dx.doi.org/10.1002/(sici)1099-1239(199606)6:5<453::aid-rnc222>3.0.co;2-5
KW - structural/acoustics
KW - H-infinity robust control
KW - computational studies
ER -
TY - JOUR
TI - Synthesizing distributed constrained events from transactional workflow specifications
T2 - Proceedings of the Twelfth International Conference on Data Engineering
AB - Workflows are the semantically appropriate composite activities in heterogeneous computing environments. Such environments typically comprise a great diversity of locally autonomous databases, applications and interfaces. Much good research has focused on the semantics of workflows and how to capture them in different extended transaction models. We address the complementary issues pertaining to how workflows may be declaratively specified and how distributed constraints may be derived from those specifications to enable local control, thus obviating a centralized scheduler. Previous approaches to this problem were limited and often lacked a formal semantics.
DA - 1996///
PY - 1996///
DO - 10.1109/ICDE.1996.492212
UR - https://publons.com/publon/21294553/
ER -
TY - CONF
TI - Synthesizing distributed constrained events from transactional workflow specifications
AU - Singh, Munindar P.
C2 - 1996///
C3 - Proceedings - International Conference on Data Engineering
DA - 1996///
SP - 616-623
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0029753889&partnerID=MN8TOARS
ER -
TY - JOUR
TI - Scheduling workflows by enforcing intertask dependencies
AU - Attie, P.C.
AU - Singh, M.P.
AU - Emerson, E.A.
AU - Sheth, A.
AU - Rusinkiewicz, M.
T2 - Distributed Systems Engineering
AB - Workflows are composite activities that can be used to support and automate multisystem applications involving humans, heterogeneous databases and legacy systems. The traditional atomic transaction model, successful for centralized and homogeneous applications, is not suitable for supporting such workflows. Intertask dependencies, which are conditions involving events and dependencies among workflow tasks, are used to specify the coordination requirements among the workflow tasks and are a central component of most workflow models. They form a basis for developing a uniform formal framework for workflows, which is a key contribution of this work. In this paper, we formalize intertask dependencies using temporal logic. This involves event attributes, which are needed to determine whether a dependency is enforceable and to properly schedule events. Each dependency is represented internally as a finite state automaton that captures the computations that satisfy the given dependency. Sets of automata are combined into a scheduler that produces global computations satisfying all relevant dependencies, thus enacting the given workflow. This algorithm is rigorously proved correct; it has been implemented.
DA - 1996///
PY - 1996///
DO - 10.1088/0967-1846/3/4/003
VL - 3
IS - 4
SP - 222-238
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0006965228&partnerID=MN8TOARS
ER -
TY - RPRT
TI - Some approximation results in multicasting
AU - Manyem, Prabhu
AU - Stallmann, M
A3 - Citeseer
DA - 1996///
PY - 1996///
PB - Citeseer
ER -
TY - JOUR
TI - Use of an Implicit Filtering Algorithm for Mechanical System Parameter Identification
AU - David, J W
AU - Kelley, C T
AU - Cheng, C Y
T2 - 1996 SAE International Congress and Exposition Conference Proceedings, Modeling of CI and SI Engines
DA - 1996///
PY - 1996///
SP - 189-194
ER -
TY - CONF
TI - Consistent initial conditions for unstructured higher index DAEs: A computational study
AU - Campbell, Stephen L.
AU - Kelley, C.T.
AU - Yeomans, K.D.
C2 - 1996///
C3 - Proceedings of Computational Engineering in Systems Applications
DA - 1996///
SP - 416–421
ER -
TY - JOUR
TI - An H∞/MinMax Periodic Control in a 2-D Structural Acoustic Model with Piezoceramic Actuators
AU - Banks, H.T.
AU - Demitriou, M.A.
AU - Smith, R.C.
T2 - IEEE Transactions on Automatic Control
AB - A feedback control computational methodology for reducing acoustic sound pressure levels in a two-dimensional cavity with a flexible boundary (a beam) is investigated. The control is implemented in this model through voltages to piezoceramic patches on the beam which are excited in a manner (out-of-phase) so as to produce pure bending moments. The incorporation of the output feedback control in this system leads to a problem with unbounded input and output terms. By writing the resulting system as an abstract Cauchy equation, the problem of reducing interior pressure levels can be posed in the context of an H/sub /spl infin///MinMax time-domain state-space formulation. A summary of extensive computational efforts comparing output feedback to full state feedback and investigating the effect of the number and location of sensors on performance of the control is presented.
DA - 1996/7//
PY - 1996/7//
DO - 10.1109/9.508899
VL - 41
IS - 7
SP - 943-959
SN - 0018-9286
UR - http://dx.doi.org/10.1109/9.508899
ER -
TY - BOOK
TI - Smart Material Structures: Modeling, Estimation and Control
AU - Banks, H.T.
AU - Smith, R.C.
AU - Wang, Y.
DA - 1996///
PY - 1996///
PB - Masson/John Wiley
ER -
TY - JOUR
TI - GMRES and the minimal polynomial
AU - Campbell, Stephen L.
AU - Ipsen, I.C.F.
AU - Kelley, C.T.
AU - Meyer, C.D.
T2 - BIT Numerical Mathematics
AB - We present a qualitative model for the convergence behaviour of the Generalised Minimal Residual (GMRES) method for solving nonsingular systems of linear equationsAx =b in finite and infinite dimensional spaces. One application of our methods is the solution of discretised infinite dimensional problems, such as integral equations, where the constants in the asymptotic bounds are independent of the mesh size. Our model provides simple, general bounds that explain the convergence of GMRES as follows: If the eigenvalues ofA consist of a single cluster plus outliers then the convergence factor is bounded by the cluster radius, while the asymptotic error constant reflects the non-normality ofA and the distance of the outliers from the cluster. If the eigenvalues ofA consist of several close clusters, then GMRES treats the clusters as a single big cluster, and the convergence factor is the radius of this big cluster. We exhibit matrices for which these bounds are tight. Our bounds also lead to a simpler proof of existing r-superlinear convergence results in Hilbert space.
DA - 1996///
PY - 1996///
DO - 10.1007/BF01733786
VL - 36
IS - 4
SP - 664–675
J2 - Bit Numer Math
LA - en
OP -
SN - 0006-3835 1572-9125
UR - http://dx.doi.org/10.1007/bf01733786
DB - Crossref
KW - GMRES
KW - superlinear convergence
KW - minimal polynomial
KW - eigenvalue index
ER -
TY - JOUR
TI - Existence and uniqueness of solutions of nonlinear systems of conductive-radiative heat transfer equations
AU - Kelley, C. T.
T2 - Transport Theory and Statistical Physics
AB - Abstract We prove an existence and uniqueness results for a system of nonlinear integro-differential equations that model steady-state combined radiative-conductive heat transfer. Our approach uses two different formulations of the system as a compact fixed-point problem. One formulation, which has been used in numerical work, is used for uniqueness and a new one is used for the existence proof.
DA - 1996/3//
PY - 1996/3//
DO - 10.1080/00411459608204839
VL - 25
IS - 2
SP - 249-260
J2 - Transport Theory and Statistical Physics
LA - en
OP -
SN - 0041-1450 1532-2424
UR - http://dx.doi.org/10.1080/00411459608204839
DB - Crossref
ER -
TY - JOUR
TI - Convergence Estimates for Solution of Integral Equations with GMRES
AU - Campbell, S.L.
AU - Ipsen, I.C.F.
AU - Kelley, C.T.
AU - Meyer, C.D.
AU - Xue, Z.Q.
T2 - Journal of Integral Equations and Applications
DA - 1996/3//
PY - 1996/3//
DO - 10.1216/jiea/1181075914
VL - 8
IS - 1
SP - 19-34
J2 - J. Integral Equations Appl.
LA - en
OP -
SN - 0897-3962
UR - http://dx.doi.org/10.1216/jiea/1181075914
DB - Crossref
ER -
TY - JOUR
TI - GMRES and Integral Operators
AU - Kelley, C. T.
AU - Xue, Z. Q.
T2 - SIAM Journal on Scientific Computing
AB - In this paper we show how the properties of integral operators and their approximations are reflected in the performance of the GMRES iteration and how these properties can be used to smooth the GMRES iterates by an implicit application of Nyström interpolation, thereby strengthening the norm in which convergence takes place. The smoothed iteration has very similar properties to Broyden’s method. We present an example to illustrate the ideas.
DA - 1996/1//
PY - 1996/1//
DO - 10.1137/0917015
VL - 17
IS - 1
SP - 217-226
J2 - SIAM J. Sci. Comput.
LA - en
OP -
SN - 1064-8275 1095-7197
UR - http://dx.doi.org/10.1137/0917015
DB - Crossref
KW - integral equations
KW - GMRES iteration
KW - Broyden's method
ER -
TY - JOUR
TI - ODE/DAE Integrators and MOL Problems
AU - Campbell, Stephen L.
AU - Marszalek, W.
T2 - Zeitschrift fuer Angewandte Mathematik und Mechanik (ZAMM)
DA - 1996///
PY - 1996///
SP - 251–254
ER -
TY - CHAP
TI - Helmut Wielandt’s contributions to the numerical solution of complex eigenvalue problems
AU - Ipsen, I.C.F.
T2 - Helmut Wielandt, Mathematische Werke, Mathematical Works, volume 2: Linear Algebra and Analysis
A2 - Huppert, B.
A2 - Schneider, H.
PY - 1996///
SP - 453–463
PB - Walter de Gruyter
ER -
TY - JOUR
TI - Inverse problems in smart material structures
AU - Banks, H. T.
AU - Smith, R. C.
AU - Wang, Y.
T2 - Journal of Inverse and Ill-Posed Problems
DA - 1996///
PY - 1996///
DO - 10.1515/jiip.1996.4.5.371
VL - 4
IS - 5
OP -
SN - 0928-0219 1569-3945
UR - http://dx.doi.org/10.1515/jiip.1996.4.5.371
DB - Crossref
ER -
TY - JOUR
TI - Parameter estimation in a structural acoustic system with fully nonlinear coupling conditions
AU - Banks, H.T.
AU - Smith, R.C.
T2 - Mathematical and Computer Modelling
AB - A methodology for estimating physical parameters in a class of structural acoustic systems is presented. The general model under consideration consists of an interior cavity which is separated from an exterior disturbance by an enclosing elastic structure. Piezoceramic patches are bonded to or embedded in the structure; these can be used both as actuators and sensors in applications ranging from the control of interior noise levels to the determination of structural flaws through nondestructive evaluation techniques. The presence and excitation of the patches, however, changes the geometry and material properties of the structure as well as involves unknown patch parameters, thus necessitating the development of parameter estimation techniques which are applicable in this coupled setting. In developing a framework for approximation, parameter estimation and implementation, strong consideration is given to the fact that the input operator is unbonded due to the discrete nature of the patches. Moreover, the model is weakly nonlinear as a result of the coupling mechanism between the structural vibrations and the interior acoustic dynamics. Within this context, an illustrating model is given, well-posedness and approximation results are discussed and an applicable parameter estimation methodology is presented. The scheme is then illustrated through several numerical examples with simulations modeling a variety of commonly used structural acoustic techniques for system excitation and data collection.
DA - 1996/2//
PY - 1996/2//
DO - 10.1016/0895-7177(96)00002-7
VL - 23
IS - 4
SP - 17-50
J2 - Mathematical and Computer Modelling
LA - en
OP -
SN - 0895-7177
UR - http://dx.doi.org/10.1016/0895-7177(96)00002-7
DB - Crossref
KW - parameter identification
KW - structural acoustics
KW - nonlinear partial differential equations
ER -
TY - JOUR
TI - Utilizing Lamarckian evolution and the Baldwin effect in hybrid genetic algorithms
AU - Houck, Christopher R
AU - Joines, Jeffrey A
AU - Kay, Michael G
DA - 1996///
PY - 1996///
ER -
TY - JOUR
TI - Moving beyond the parts incidence matrix: Alternative routings and operations for the cell formation problem
AU - Joines, Jeffrey A
AU - King, Russell E
AU - Culbreth, C Thomas
T2 - International Journal of Engineering Design and Automation
DA - 1996///
PY - 1996///
ER -
TY - CONF
TI - Design of object-oriented simulations in C++
AU - Joines, Jeffrey A.
AU - Roberts, Stephen D.
AB - An object-oriented simulation (OOS) consisting of a set of object classes written in C++ can be used to create simulation models and packages. The simulations built with these tools possess the benefits of an object-oriented design, including the use of encapsulation, inheritance, polymorphism, run-time binding, and parameterized typing. These concepts are illustrated by creating a set of object frames which encapsulate simulation requirements. Simulation modeling is contained within a set of modeling frameworks. A network queuing simulation language is developed which has several notable features not available in other non-OOS languages. OOS provides full accessibility to the base language, faster executions, portable models and executables, a multi-vendor programming language, and a growing variety of complementary development tools.
C2 - 1996///
C3 - Proceedings of the 28th conference on Winter simulation - WSC '96
DA - 1996///
DO - 10.1145/256562.256574
PB - ACM Press
ER -
TY - JOUR
TI - Scheduling arrivals to a production system in a fuzzy environment
AU - Stanfield, Paul M.
AU - King, Russell E.
AU - Joines, Jeff A.
T2 - European Journal of Operational Research
AB - Abstract A frequently encountered scheduling problem is to determine a material and job ready time while simultaneously finding a production sequence given customer-specified due dates. Often the production times and due dates are vague. This paper presents an investigation of scheduling ready times for a set of jobs with fuzzy service times and due dates. The ready time is constrained in that the possibility that a job is late must not exceed a predefined value. The objective in such an instance is to maximize the ready time without violating these constraints. The steps necessary to determine the maximum ready time and cases in which this effort may be significantly reduced are presented for single machine and flow shop production systems. Finally, a branch and bound technique is developed for cases in which the optimal job sequence cannot be determined a priori.
DA - 1996/8//
PY - 1996/8//
DO - 10.1016/0377-2217(95)00117-4
VL - 93
IS - 1
SP - 75-87
J2 - European Journal of Operational Research
LA - en
OP -
SN - 0377-2217
UR - http://dx.doi.org/10.1016/0377-2217(95)00117-4
DB - Crossref
KW - scheduling theory
KW - fuzzy sets
ER -
TY - CONF
TI - Verifying the timing requirements of multiprocessor control systems
C2 - 1996///
C3 - Proceedings of the Conference on Analysis and Computation
DA - 1996///
SP - 278-285
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0029736047&partnerID=MN8TOARS
ER -
TY - JOUR
TI - Verification of an active control system using temporal process Algebra
T2 - Engineering with Computers
DA - 1996///
PY - 1996///
VL - 12
IS - 1
SP - 46-61
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0029753271&partnerID=MN8TOARS
ER -
TY - JOUR
TI - Network-distributed finite element analysis
T2 - Advances in Engineering Software
DA - 1996///
PY - 1996///
VL - 25
IS - 2-3
SP - 267-280
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0030102588&partnerID=MN8TOARS
ER -
TY - CONF
TI - Formal specification of concurrent finite element systems
C2 - 1996///
C3 - Proceedings of the Conference on Analysis and Computation
DA - 1996///
SP - 166-176
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0029735025&partnerID=MN8TOARS
ER -
TY - CONF
TI - A controlled comparison of traditional classroom instruction with computer based instruction in an engineering class
C2 - 1996///
C3 - ASEE Annual Conference Proceedings
DA - 1996///
SP - 31-35
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-8744254801&partnerID=MN8TOARS
ER -
TY - JOUR
TI - Comprehensive review of production-oriented cell formation techniques
AU - Joines, J.A.
AU - King, R.E.
AU - Culbreth, C.T.
T2 - International Journal of Flexible Automation and Integrated Manufacturing
DA - 1996///
PY - 1996///
VL - 3
IS - 3&4
SP - 161–200
ER -
TY - JOUR
TI - Manufacturing cell design: An integer programming model employing genetic algorithms
AU - Joines, J.
AU - Culbreth, C. T.
AU - King, R. E.
T2 - IIE Transactions
AB - The design of a cellular manufacturing system requires that a part population, at least minimally described by its use of process technology (part/machine incidence matrix), be partitioned into part families and that the associated plant equipment be partitioned into machine cells. At the highest level, the objective is to form a set of completely autonomous units such that inter-cell movement of parts is minimized. We present an integer program that is solved using a genetic algorithm (GA) to assist in the design of cellular manufacturing systems. The formulation uses a unique representation scheme for individuals (part/machine partitions) that reduces the size of the cell formation problem and increases the scale of problems that can be solved. This approach offers improved design flexibility by allowing a variety of evaluation functions to be employed and by incorporating design constraints during cell formation. The effectiveness of the GA approach is demonstrated on several problems from the literature.
DA - 1996///
PY - 1996///
DO - 10.1080/07408179608966253
VL - 28
IS - 1
SP - 69–85
J2 - IIE Transactions
LA - en
OP -
SN - 0740-817X 1545-8830
UR - http://dx.doi.org/10.1080/07408179608966253
DB - Crossref
ER -
TY - JOUR
TI - Comparison of genetic algorithms, random restart, and two-opt switching for solving large location-allocation problems
AU - Houck, C. R.
AU - Joines, J. A.
AU - Kay, M. G.
T2 - Computers & Operations Research
AB - This paper examines the application of a genetic algorithm used in conjunction with a local improvement procedure for solving the location-allocation problem, a traditional multifacility location problem. This problem is difficult to solve using traditional optimization techniques because of its multimodal, nonconvex nature. The alternate location-allocation (ALA) method has been shown to be an effective local improvement procedure for the location-allocation problem. Using the ALA method, an empirical analysis was done to determine the number and size of the local minima of the location-allocation problem to demonstrate the reduction of the size of the search space that can be achieved through the use of the ALA method as an evaluator. A genetic algorithm that evaluates a series of ALA solutions was developed and compared to two traditional heuristic procedures for the problem: random restart and H4, a two-opt procedure. Like the genetic algorithm, both procedures evaluate a series of ALA solutions. A statistical analysis of the quality of the solutions provided by the three procedures for several problems of varying size demonstrated that the genetic algorithm provides the best solutions. An examination of the number of ALA evaluations performed by each procedure showed that the genetic algorithm also found solutions to the larger size problems much quicker than either the random restart or the H4 procedures.
DA - 1996///
PY - 1996///
DO - 10.1016/0305-0548(95)00063-1
VL - 23
IS - 6
SP - 587–596
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-0030168535&partnerID=MN8TOARS
ER -
TY - JOUR
TI - The technological and economic impact of high volume instrument (HVI) systems on the cotton and cotton textile industries
AU - Suh, MW
AU - Sasser, PE
T2 - JOURNAL OF THE TEXTILE INSTITUTE
AB - The development and use of HVI systems have resulted in significant technological and economic changes in the production and mill consumption of cotton. This paper explains how the testing systems are used and examines and discusses the impact of changes on the cotton and cotton textile industries. The paper also examines the trends and future development capabilities of such HVI systems and concludes that such changes may he only a small portion of what is forthcoming in the continuous improvement of cotton textile quality.
DA - 1996///
PY - 1996///
DO - 10.1080/00405009608659117
VL - 87
SP - 43-59
SN - 1754-2340
ER -
TY - CHAP
TI - Automatic differentiation and implicit differential equations
AU - Campbell, S. L.
AU - Hollenbeck, R.
T2 - Computational differentiation: Techniques, applications, and tools
A2 - B. Berz, C. Bischof
A2 - G. Corliss,
A2 - Griewank, A.
PY - 1996///
PB - Philadelphia: SIAM
ER -