Operations Research - 1996

Rouskas, G. N., Sivaraman, V., & IEEE. (1996). On the design of optimal TDM schedules for broadcast WDM networks with arbitrary transceiver tuning latencies. In Ieee Infocom '96 - Fifteenth Annual Joint Conference of the Ieee Computer and Communications Societies: Networking the Next Generation, Proceedings Vols 1-3 (pp. 1217–1224).

Rouskas, G. N., Baldine, I., & IEEE. (1996). Multicast routing with end-to-end delay and delay variation constraints. In Ieee Infocom '96 - Fifteenth Annual Joint Conference of the Ieee Computer and Communications Societies: Networking the Next Generation, Proceedings Vols 1-3 (pp. 353–360).

Rouskas, G. N., & Ammar, M. H. (1996). Minimizing delay and packet loss in single-hop lightwave WDM networks using TDMA schedules. Journal of High Speed Networks, 5(4), 309–327.

Hayden, L., & Roise, J. P. (1996). Schedule of Entry by analysis Area for the Nantahala/Pisgah National Forests, National Forests in North Carolina. Presented at the U.S.D.A. Forest Service, Asheville N.C.

Uzsoy, R., & Venkatachalam, G. (1996, October). Production Planning with Product Recovery and Remanufacturing. Presented at the INFORMS National Meeting, Atlanta, GA.

Uzsoy, R., & Wang, C. S. (1996, October). Scheduling Semiconductor Burn-In Operations in the Presence of Resource Constraints. Presented at the INFORMS National Meeting, Atlanta, GA.

Uzsoy, R. (1996, January). Shop Floor Control for Semiconductor Manufacturing Facilities. Presented at the Intel Corporation, Rio Rancho, NM.

Uzsoy, R. (1996, March). Shop Floor Control for Semiconductor Manufacturing Facilities. Presented at the Hitachi Semiconductor U.S., Irving, TX.

Uzsoy, R. (1996, April). Shop Floor Control for Semiconductor Manufacturing Facilities. Presented at the Department of Industrial and Management Systems Engineering, Arizona State University, Tempe, AZ.

Uzsoy, R. (1996, July). Global Scheduling Procedures for Semiconductor Manufacturing Facilities. Presented at the Advanced Micro Devices, Austin, TX.

Uzsoy, R. (1996, October). Shop Floor Control for Semiconductor Manufacturing Facilities. Presented at the Delco Electronics, Kokomo, IN.

Uzsoy, R. (1996, October). Decomposition Methods for Scheduling Complex Job Shops. Presented at the College of Business Administration, University of Texas at Austin, Austin, TX.

Uzsoy, R., Clegg, A., Williams, D. J., Venkatadri, U., & Venkatachalam, G. (1996, May). Supply Chain Coordination in the Presence of Remanufacturing. Presented at the INFORMS National Meeting, Washington DC.

Uzsoy, R., & Venkatadri, U. (1996, May). Determining Disassembly Configurations in Remanufacturing. Presented at the INFORMS National Meeting, Washington DC.

Lee, C. Y., & Uzsoy, R. (1996, May). Minimizing Makespan for Scheduling Semiconductor Burn-In Operations with Different Arrival Times. Presented at the INFORMS National Meeting, Washington DC.

Uzsoy, R., Rajagopalan, S., & Ovacik, I. M. (1996, May). Integrating Optimum Estimation with Simulated Annealing for a Single Machine Scheduling Problem. Presented at the INFORMS National Meeting, Washington DC.

Liu, J., Mercer, J. M., Stam, L. F., Gibson, G. C., Zeng, Z.-B., & Laurie, C. C. (1996). Genetic analysis of a morphological shape difference in the male genitalia of Drosophila simulans and D. mauritiana. Genetics, 142(4), 1129–1145. https://doi.org/10.1093/genetics/142.4.1129

Cockerham, C. C., & Zeng, Z.-B. (1996). Design III with marker loci. Genetics, 143(3), 1437–1456. https://doi.org/10.1093/genetics/143.3.1437

Zeng, Z.-B., & Weir, B. S. (1996). Statistical methods for mapping quantitative trait loci. Acta Agronomica Sinica, 22, 535–549.

Chen, S., Takoudis, C., & Uzsoy, R. (1996). Yield of silicon selective epitaxial growth and its role in the production planning and control of three-dimensional semiconductor devices. Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium. Presented at the Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium. https://doi.org/10.1109/iemt.1996.559732

Nemoto, K., Akcali, E., & Uzsoy, R. (1996). Quantifying the benefits of cycle time reduction in semiconductor wafer fabrication. Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium, 130–136. https://doi.org/10.1109/iemt.1996.559705

Kayton, D., Teyner, T., Schwartz, C., & Uzsoy, R. (1996). Effects of dispatching and down time on the performance of wafer fabs operating under theory of constraints. Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium. Presented at the Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium. https://doi.org/10.1109/iemt.1996.559681

Ovacik, I. M., & Uzsoy, R. (1996). Decomposition methods for scheduling semiconductor testing facilities. International Journal of Flexible Manufacturing Systems, 8(4). https://doi.org/10.1007/bf00170018

Chand, S., Traub, R., & Uzsoy, R. (1996). Single-machine scheduling with dynamic arrivals: Decomposition results and an improved algorithm. Naval Research Logistics, 43(5), 709–719. https://doi.org/10.1002/(sici)1520-6750(199608)43:5<709::aid-nav7>3.0.co;2-9

Chand, S., Traub, R., & Uzsoy, R. (1996). An iterative heuristic for the single machine dynamic total completion time scheduling problem. Computers & Operations Research, 23(7), 641–651. https://doi.org/10.1016/0305-0548(95)00071-2

Holtsclaw, H. H., & Uzsoy, R. (1996). Machine Criticality Measures and Subproblem Solution Procedures in Shifting Bottleneck Methods: A Computational Study. The Journal of the Operational Research Society, 47(5), 666. https://doi.org/10.2307/3010017

Houck, C. R., Culbreth, C. T., & King, R. E. (1996). Neural network scheduling of a flexible manufacturing cell using dynamic process plans. International Journal of Flexible Automation and Integrated Manufacturing, 4(3-4), 213–229.

Campbell, S. L., Moore, E., & Zhong, Y. (1996). Constraint Preserving Integrators for Unstructured Higher Index DAEs. Zeitschrift Fuer Angewandte Mathematik Und Mechanik (ZAMM), 83–86.

Campbell, S. L., Delebecque, F., & Nikoukhah, R. (1996). Pencil algorithms and observer design. Proceedings of the 1996 IEEE International Symposium on Computer-Aided Control System Design (CACSD), 83–88. New York: Institute of Electrical and Electronics Engineers.

Campbell, S. L., von Wissel, D., Nikoukhah, R., & Delebecque, F. (1996). Descriptor predictive control: tracking controllers for a riderless bicycle. Proceedings of Computational Engineering in Systems Applications, 292–297. Lille, France.

Campbell, S. L., von Wissel, D., Nikoukhah, R., & Delebecque, F. (1996). Nonlinear observer design using implicit system descriptions. In S. L. C. Wissel, R. Nikoukhah, & F. Delebecque (Eds.), Proceedings of Computational Engineering in Systems Applications (pp. 404–409). Lille, France.

Roise, J. P., & Jerger, E. (1996). COW Users Manual. Little Rock, Arkansas: Winrock International.

Roise, J. P., & Jerger, E. (1996). COW - Cost of Wood Products, A software program for use in Secondary Wood Products Manufacturing [Software]. Little Rock, Arkansas: Winrock International.

Hughell, D. A., & Roise, J. P. (1996). Spatially explicit multi-objecitve analysis for timber and wildlife. Presented at the 1996 Society of American Foresters Convention, Albuquerque, NM.

Hassan, A. E., & Roise, J. P. (1996). Soil Recovery and Regeneration of a Wetland Site One-Year After Harvest (American Society of Agricultural Engineers Paper No. 965002). St. Joseph, MI: ASAE.

Fang, S., & Wang, D. W. (1996). Just-in-Time Production Planning with Semi-Infinite Programming and Genetic Algorithms. Journal of Control and Decision, 11, 446–451.

Fang, S.-C., & Tsao, H.-S. J. (1996). An efficient computational procedure for solving entropy optimization problems with infinitely many linear constraints. Journal of Computational and Applied Mathematics, 72(1), 127–139. https://doi.org/10.1016/0377-0427(95)00266-9

Lin, C.-J., Fang, S.-C., & Wu, S.-Y. (1996). Parametric linear semi-infinite programming. Applied Mathematics Letters, 9(3), 89–96. https://doi.org/10.1016/0893-9659(96)00038-9

Fang, S.-C., & Tsao, H.-S. J. (1996). A dual perturbation view of linear programming. Mathematical Methods of Operations Research, 44(1), 1–9. https://doi.org/10.1007/bf01246326

Fang, S.-C., & Wu, S.-Y. (1996). Solving min-max problems and linear semi-infinite programs. Computers & Mathematics with Applications, 32(6), 87–93. https://doi.org/10.1016/0898-1221(96)00145-9

Fang, S.-C., & Tsao, H. S. J. (1996). Solving Linear Programs With Inequality Constraints Via Perturbation of Feasible Region. Optimization, 37(3), 213–223. https://doi.org/10.1080/02331939608844214

Fang, S. C., & Tsao, H. S. J. (1996). On the entropic perturbation and exponential penalty methods for linear programming. Journal of Optimization Theory and Applications, 89(2), 461–466. https://doi.org/10.1007/bf02192539

Hwang, T.-M., Lin, C.-H., Lin, W.-W., & Fang, S.-C. (1996). A relaxed primal-dual path-following algorithm for linear programming. Annals of Operations Research, 62(1), 173–196. https://doi.org/10.1007/bf02206816

Wang, D., & Fang, S.-C. (1996). A semi-infinite programming model for earliness/tardiness production planning with a genetic algorithm. Computers & Mathematics with Applications, 31(8), 95–106. https://doi.org/10.1016/0898-1221(96)00034-x

Tsao, H.-S. J., & Fang, S.-C. (1996). Linear programming with inequality constraints via entropic perturbation. International Journal of Mathematics and Mathematical Sciences, 19(1), 177–184. https://doi.org/10.1155/s0161171296000257

Ipsen, I. C. F. (1996). A history of inverse iteration. In H. Wielandt, B. Huppert, & H. Schneider (Eds.), Mathematische Werke. Vol. 2, Linear algebra and analysis : Mathematical works (pp. 464–472). Berlin: Walter de Gruyter.

Handfield, R. B., Walton, S. V., Goizueta, R. C., Seegers, L. K., & Melnyk, S. A. (1996). `Green' supply chain: Best practices from the furniture industry. Proceedings - Annual Meeting of the Decision Sciences Institute, 3, 1295–1297. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030363766&partnerID=MN8TOARS

Ragatz, G. L., Handfield, R. B., & Scannell, T. V. (1996). Success factors for integrating suppliers into new product development. Proceedings - Annual Meeting of the Decision Sciences Institute, 3, 1442–1444. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030349915&partnerID=MN8TOARS

Walton, S. V., & Handfield, R. B. (1996). Recent trends in operations management research. Proceedings - Annual Meeting of the Decision Sciences Institute, 3, 1290. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030359176&partnerID=MN8TOARS

Melnyk, S. A., Handfield, R., Calantone, R. J., & Curkovic, S. (1996). Integrating environmental concerns into the design process. Proceedings - Annual Meeting of the Decision Sciences Institute, 3, 1301–1303. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030354561&partnerID=MN8TOARS

Pagell, M., & Handfield, R. (1996). Importance of unions to operations strategy. Proceedings - Annual Meeting of the Decision Sciences Institute, 3, 1359–1361. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030366014&partnerID=MN8TOARS

Melnyk, S. A., & Handfield, R. B. (1996). Environmentally responsible manufacturing: Research issues and opportunities. Proceedings - Annual Meeting of the Decision Sciences Institute, 3, 1331. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030372360&partnerID=MN8TOARS

Jayaram, J., Handfield, R., & Ghosh, S. (1996). Empirical study of the impact of quality tools and techniques on quality attributes and quality strategies. Proceedings - Annual Meeting of the Decision Sciences Institute, 3, 1664. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030374262&partnerID=MN8TOARS

McDermott, C., & Handfield, R. (1996). Does the parallel approach make sense in the development of discontinuous innovations? IEEE International Engineering Management Conference, 370–374. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0029767091&partnerID=MN8TOARS

Singh, M. P., & Vouk, M. A. (1996). Scientific Workflows: Scientific Computing Meets Transactional Workflows. Proceedings of the National Science Foundation Workshop on Workflow and Process Automation in Information Systems: State-of-the-Art and Future Directions. Presented at the NSF Workshop on Workflow and Process Automation in Information Systems, Athens, GA. Retrieved from http://www.csc.ncsu.edu/faculty/mpsingh/workflows/sciworkflows.html

Singh, M. P. (1996). Multiagent Systems as Spheres of Commitment. Proceedings of the International Conference on Multiagent Systems (ICMAS) Workshop on Norms, Obligations, and Conventions, 1–13.

Woelk, D., Cannata, P., Huhns, M. N., Jacobs, N., Ksiezyk, T., Lavender, G., … Tomlinson, C. (1996). Carnot Prototype. In O. A. Bukhres & A. K. Elmagarmid (Eds.), Object-Oriented Multidatabase Systems: A Solution for Advanced Applications (pp. 621–648). Prentice-Hall.

Singh, M. P. (1996). Book review: ARCHON: An Architecture for Multi-agent Systems. Edited by Wittig, Thies (Ellis Horwood Limited (distributed by Prentice Hall), 1992) [Review of ARCHON: An Architecture for Multi-agent Systems, by T. Wittig]. ACM SIGART Bulletin, 7(1), 9–10. https://doi.org/10.1145/230062.1066045

Campbell, S. L., Delebecque, F., & von Wissel, D. (1996). A mixed symbolic-numeric software environment. Proceedings of Joint Conference on Control Applications Intelligent Control and Computer Aided Control System Design. Presented at the Joint Conference on Control Applications Intelligent Control and Computer Aided Control System Design. https://doi.org/10.1109/cacsd.1996.555331

Li, Z. (1996). A note on immersed interface method for three-dimensional elliptic equations. Computers & Mathematics with Applications, 31(3), 9–17. https://doi.org/10.1016/0898-1221(95)00202-2

Singh, M. P. (1996). Agents misunderstood. IEEE Spectrum, 33(2), 10–64. https://doi.org/10.1109/mspec.1996.482270

Singh, M. P. (1996). Semantical considerations on some primitives for agent specification. In Intelligent Agents II Agent Theories, Architectures, and Languages (pp. 49–64). https://doi.org/10.1007/3540608052_58

Goodridge, S. G., Kay, M. G., & Luo, R. C. (1996). Multilayered fuzzy behavior fusion for real-time reactive control of systems with multiple sensors. IEEE Transactions on Industrial Electronics, 43(3), 387–394. https://doi.org/10.1109/41.499811

Goodridge, S. G., & Kay, M. G. (1996). Multimedia sensor fusion for intelligent camera control. IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems, 655–662. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030411519&partnerID=MN8TOARS

King, R. E., & Hunter, N. A. (1996). Demand Re-estimation and Inventory Replenishment of Basic Apparel in a Specialty Retail Chain. Journal of the Textile Institute, 87(1), 31–41. https://doi.org/10.1080/00405009608659100

Hunter, N. A., King, R. E., & Nuttle, H. L. W. (1996). Evaluation of Traditional and Quick-response Retailing Procedures by Using a Stochastic Simulation Model. Journal of the Textile Institute, 87(1), 42–55. https://doi.org/10.1080/00405009608659101

Banks, H. T., Demetriou, M. A., & Smith, R. C. (1996). Robustness studies for H∞ feedback control in a structural acoustic model with periodic excitation. International Journal of Robust and Nonlinear Control, 6(5), 453–478. https://doi.org/10.1002/(sici)1099-1239(199606)6:5<453::aid-rnc222>3.0.co;2-5

Synthesizing distributed constrained events from transactional workflow specifications. (1996). Proceedings of the Twelfth International Conference on Data Engineering. https://doi.org/10.1109/ICDE.1996.492212

Singh, M. P. (1996). Synthesizing distributed constrained events from transactional workflow specifications. Proceedings - International Conference on Data Engineering, 616–623. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0029753889&partnerID=MN8TOARS

Attie, P. C., Singh, M. P., Emerson, E. A., Sheth, A., & Rusinkiewicz, M. (1996). Scheduling workflows by enforcing intertask dependencies. Distributed Systems Engineering, 3(4), 222–238. https://doi.org/10.1088/0967-1846/3/4/003

Manyem, P., & Stallmann, M. (1996). Some approximation results in multicasting. Citeseer.

David, J. W., Kelley, C. T., & Cheng, C. Y. (1996). Use of an Implicit Filtering Algorithm for Mechanical System Parameter Identification. 1996 SAE International Congress and Exposition Conference Proceedings, Modeling of CI and SI Engines, pp. 189–194. Washington, D. C.: Society of Automotive Engineers.

Campbell, S. L., Kelley, C. T., & Yeomans, K. D. (1996). Consistent initial conditions for unstructured higher index DAEs: A computational study. Proceedings of Computational Engineering in Systems Applications, 416–421. Lille, France.

Banks, H. T., Demitriou, M. A., & Smith, R. C. (1996). An H∞/MinMax Periodic Control in a 2-D Structural Acoustic Model with Piezoceramic Actuators. IEEE Transactions on Automatic Control, 41(7), 943–959. https://doi.org/10.1109/9.508899

Banks, H. T., Smith, R. C., & Wang, Y. (1996). Smart Material Structures: Modeling, Estimation and Control. Paris/Chichester: Masson/John Wiley.

Campbell, S. L., Ipsen, I. C. F., Kelley, C. T., & Meyer, C. D. (1996). GMRES and the minimal polynomial. BIT Numerical Mathematics, 36(4), 664–675. https://doi.org/10.1007/BF01733786

Kelley, C. T. (1996). Existence and uniqueness of solutions of nonlinear systems of conductive-radiative heat transfer equations. Transport Theory and Statistical Physics, 25(2), 249–260. https://doi.org/10.1080/00411459608204839

Campbell, S. L., Ipsen, I. C. F., Kelley, C. T., Meyer, C. D., & Xue, Z. Q. (1996). Convergence Estimates for Solution of Integral Equations with GMRES. Journal of Integral Equations and Applications, 8(1), 19–34. https://doi.org/10.1216/jiea/1181075914

Kelley, C. T., & Xue, Z. Q. (1996). GMRES and Integral Operators. SIAM Journal on Scientific Computing, 17(1), 217–226. https://doi.org/10.1137/0917015

Campbell, S. L., & Marszalek, W. (1996). ODE/DAE Integrators and MOL Problems. Zeitschrift Fuer Angewandte Mathematik Und Mechanik (ZAMM), 251–254.

Ipsen, I. C. F. (1996). Helmut Wielandt’s contributions to the numerical solution of complex eigenvalue problems. In B. Huppert & H. Schneider (Eds.), Helmut Wielandt, Mathematische Werke, Mathematical Works, volume 2: Linear Algebra and Analysis (pp. 453–463). Berlin: Walter de Gruyter.

Banks, H. T., Smith, R. C., & Wang, Y. (1996). Inverse problems in smart material structures. Journal of Inverse and Ill-Posed Problems, 4(5). https://doi.org/10.1515/jiip.1996.4.5.371

Banks, H. T., & Smith, R. C. (1996). Parameter estimation in a structural acoustic system with fully nonlinear coupling conditions. Mathematical and Computer Modelling, 23(4), 17–50. https://doi.org/10.1016/0895-7177(96)00002-7

Houck, C. R., Joines, J. A., & Kay, M. G. (1996). Utilizing Lamarckian evolution and the Baldwin effect in hybrid genetic algorithms. Department of Industrial Engineering, North Carolina State Univ.

Joines, J. A., King, R. E., & Culbreth, C. T. (1996). Moving beyond the parts incidence matrix: Alternative routings and operations for the cell formation problem. International Journal of Engineering Design and Automation.

Joines, J. A., & Roberts, S. D. (1996). Design of object-oriented simulations in C++. Proceedings of the 28th conference on Winter simulation  - WSC '96. https://doi.org/10.1145/256562.256574

Stanfield, P. M., King, R. E., & Joines, J. A. (1996). Scheduling arrivals to a production system in a fuzzy environment. European Journal of Operational Research, 93(1), 75–87. https://doi.org/10.1016/0377-2217(95)00117-4

Verifying the timing requirements of multiprocessor control systems. (1996). Proceedings of the Conference on Analysis and Computation, 278–285. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0029736047&partnerID=MN8TOARS

Verification of an active control system using temporal process Algebra. (1996). Engineering with Computers, 12(1), 46–61. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0029753271&partnerID=MN8TOARS

Network-distributed finite element analysis. (1996). Advances in Engineering Software, 25(2-3), 267–280. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030102588&partnerID=MN8TOARS

Formal specification of concurrent finite element systems. (1996). Proceedings of the Conference on Analysis and Computation, 166–176. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0029735025&partnerID=MN8TOARS

A controlled comparison of traditional classroom instruction with computer based instruction in an engineering class. (1996). ASEE Annual Conference Proceedings, 31–35. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-8744254801&partnerID=MN8TOARS

Joines, J. A., King, R. E., & Culbreth, C. T. (1996). Comprehensive review of production-oriented cell formation techniques. International Journal of Flexible Automation and Integrated Manufacturing, 3(3&4), 161–200.

Joines, J. A., Culbreth, C. T., & King, R. E. (1996). Manufacturing cell design: an integer programming model employing genetic algorithms. IIE Transactions, 28(1), 69–85. https://doi.org/10.1080/07408179608966253

Houck, C. R., Joines, J. A., & Kay, M. G. (1996). Comparison of genetic algorithms, random restart, and two-opt switching for solving large location-allocation problems. Computers & Operations Research, 23(6), 587–596. https://doi.org/10.1016/0305-0548(95)00063-1

Suh, M. W., & Sasser, P. E. (1996). The technological and economic impact of high volume instrument (HVI) systems on the cotton and cotton textile industries. JOURNAL OF THE TEXTILE INSTITUTE, 87, 43–59. https://doi.org/10.1080/00405009608659117

Campbell, S. L., & Hollenbeck, R. (1996). Automatic differentiation and implicit differential equations. In C. B. B. Berz, G. Corliss, & A. Griewank (Eds.), Computational differentiation: Techniques, applications, and tools. Philadelphia: SIAM.