2023 article
RF-to-Millimeter-Wave Receivers Employing Frequency-Translated Feedback
Dean, J., Hari, S., & Floyd, B. A. (2023, October 11). IEEE JOURNAL OF SOLID-STATE CIRCUITS.
author keywords: 5G; beamforming; CMOS; direct conversion; frequency-translational feedback; front end; impedance matching; millimeter wave (mm-wave); mixer; N-path; negative feedback; passive mixer; receiver (RX); software-defined radio; wideband
www.lib.ncsu.edu (repository)
Source: Web Of Science
Added: November 6, 2023
This article presents multi-band direct-conversion receivers (RXs) with frequency-translated negative feedback. The forward path includes a low-noise transconductance amplifier (LNTA) followed by four-phase passive mixers that drive baseband amplifiers. A feedback path employs tunable resistor banks attached to additional four-phase passive mixers, allowing tunable, frequency-selective input matching around a wide range of local oscillator (LO) frequencies. The passive mixers are driven by 25% duty-cycle, non-overlapping quadrature LO waveforms, and two different methods are presented for generating such waveforms. Two RX variants, differing in their LO generation schemes, are fabricated in 45-nm SOI CMOS. The first operates from 6 to 30 GHz, exhibiting greater than 25-dB gain and 4.1–10.5-dB noise figure (NF). A second operates from 10 to 50 GHz, achieving greater than 18-dB gain with 7.1–17-dB NF across the band. For either version, the instantaneous bandwidth is 960 MHz for the highest gain setting and 1375 MHz with reduced gain, measured at 10 GHz LO. The in-band third-order intercept point (IIP3) is <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$-$</tex-math> </inline-formula> 5.4 dBm, the in-band IIP2 is <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$+$</tex-math> </inline-formula> 16.5 dBm, and the out-of-band 1-dB blocker compression is greater than <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$-$</tex-math> </inline-formula> 15 dBm. The RX core consumes 71 mW, while LO circuitry in each variant consumes 48–182 and 72–262 mW from 10 to 50 and 6 to 30 GHz, respectively.
