InGaN/GaN multiple quantum well (MQW) structures currently used in optical devices are based on highly strained InGaN films. The presence of strain reduces quantum efficiency and indium incorporation, two critical parameters in addressing the green gap. We report on the growth of InGaN-relaxed templates on GaN as substrates to reduce the strain in the MQW structures. Relaxation in the InGaN templates, due to the lattice mismatch, is accommodated by the generation of V-pits rather than the formation of misfit dislocations. InxGa1−xN templates (x ∼ 0.1) are grown via a modified semibulk (SB) approach, with a gradually increasing GaN interlayer thickness to provide a mechanism for backfilling of V-pits. We used high-resolution x-ray diffraction rocking curves to quantify the edge-type and screw-type dislocation density present in the SB and compared the results with the etch pit density obtained via atomic force microscopy after treating the SB with a silane etch. Device-quality InGaN templates with defect density in the mid 108 cm−2 were investigated using the above two approaches, with a quality comparable to state-of-the-art GaN.