2021 journal article
A study of dopant incorporation in Te-doped GaAsSb nanowires using a combination of XPS/UPS, and C-AFM/SKPM
SCIENTIFIC REPORTS, 11(1).
TL;DR:
These surface analytical tools, XPS/UPS and C-AFM/SKPM, that do not require any sample preparation are found to be powerful characterization techniques to analyze the dopant incorporation and carrier density in homogeneously doped NWs.
(via Semantic Scholar)
open access via www.nature.com (publisher PDF)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science)
Source: Web Of Science
Added: June 10, 2021
AbstractWe report the first study on doping assessment in Te-doped GaAsSb nanowires (NWs) with variation in Gallium Telluride (GaTe) cell temperature, using X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), conductive-atomic force microscopy (C-AFM), and scanning Kelvin probe microscopy (SKPM). The NWs were grown using Ga-assisted molecular beam epitaxy with a GaTe captive source as the dopant cell. Te-incorporation in the NWs was associated with a positive shift in the binding energy of the 3d shells of the core constituent elements in doped NWs in the XPS spectra, a lowering of the work function in doped NWs relative to undoped ones from UPS spectra, a significantly higher photoresponse in C-AFM and an increase in surface potential of doped NWs observed in SKPM relative to undoped ones. The carrier concentration of Te-doped GaAsSb NWs determined from UPS spectra are found to be consistent with the values obtained from simulated I–V characteristics. Thus, these surface analytical tools, XPS/UPS and C-AFM/SKPM, that do not require any sample preparation are found to be powerful characterization techniques to analyze the dopant incorporation and carrier density in homogeneously doped NWs.