Works (128)

Updated: March 2nd, 2024 07:47

2023 article

All Electrohydrodynamic Printed Flexible Organic Thin Film Transistors

Ren, P., Song, R., Zhu, Y., O'Connor, B., & Dong, J. (2023, June 21). ADVANCED MATERIALS TECHNOLOGIES, Vol. 6.

By: P. Ren n, R. Song n, Y. Zhu n, B. O'Connor n & J. Dong n

co-author countries: United States of America 🇺🇸
author keywords: electrohydrodynamic printing; flexible electronics; flexible transistors; organic thin film transistors; orthogonal inks
Sources: Web Of Science, ORCID
Added: July 3, 2023

2023 article

Direct printing of conductive polymer PEDOT:PSS for foldable transient electronics

Ren, P., & Dong, J. (2023, August). MANUFACTURING LETTERS, Vol. 35, pp. 215–220.

By: P. Ren n & J. Dong n

co-author countries: United States of America 🇺🇸
author keywords: EHD printing; Foldable electronics; PEDOT: PSS; Transient electronics
Sources: ORCID, Web Of Science
Added: October 24, 2023

2023 article

Electrohydrodynamic Printed Pedot:Pss/Graphene/Pva Circuits for Sustainable and Foldable Electronics

Ren, P., & Dong, J. (2023, August 24). ADVANCED MATERIALS TECHNOLOGIES, Vol. 8.

By: P. Ren n & J. Dong n

co-author countries: United States of America 🇺🇸
author keywords: eco-friendly electronics; electrohydrodynamic printing; foldable electronics; temperature sensors; transient electronics
Sources: ORCID, Web Of Science
Added: August 31, 2023

2023 article

Stretchable Organic Transistor Based Pressure Sensor Employing a Porous Elastomer Gate Dielectric

Song, R., Ren, P., Liu, Y., Zhu, Y., Dong, J., & Brendan T. O'Connor. (2023, April 28). ADVANCED MATERIALS TECHNOLOGIES, Vol. 4.

By: R. Song n, P. Ren n, Y. Liu n, Y. Zhu n, J. Dong n & . Brendan T. O'Connor n

co-author countries: United States of America 🇺🇸

Contributors: R. Song n, P. Ren n, Y. Liu n, Y. Zhu n, J. Dong n & . B.T. O'Connor

author keywords: elastomer dielectric; organic thin film transistors; porous structures; pressure sensors
Sources: Web Of Science, ORCID
Added: May 15, 2023

2022 journal article

Curvilinear soft electronics by micromolding of metal nanowires in capillaries

SCIENCE ADVANCES, 8(46).

By: Y. Liu n, M. Zheng n, B. O'Connor n, J. Dong n & Y. Zhu n

co-author countries: United States of America 🇺🇸

Contributors: Y. Liu n, M. Zheng n, B. O’Connor n, J. Dong n & Y. Zhu n

Sources: ORCID, Web Of Science
Added: November 19, 2022

2022 journal article

Direct electrohydrodynamic printing of aqueous silver nanowires ink on hydrophobic substrates for flexible and stretchable electronics

Manufacturing Letters, 33, 161–166.

By: P. Ren n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: J. Dong n

Source: ORCID
Added: September 21, 2022

2022 journal article

Fabrication, modeling, and characterization of soft twisting electrothermal actuators with directly printed oblique heater

JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 32(3).

By: Y. Cao & J. Dong*

Contributors: Y. Cao & J. Dong*

author keywords: soft actuator; electrohydrodynamic (EHD) printing; soft twisting actuator; electrothermal actuator
Sources: Web Of Science, ORCID
Added: January 31, 2022

2022 journal article

Freeform printing and modeling of soft twisting electrothermal actuators

Manufacturing Letters, 33, 41–47.

By: Y. Cao* & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: J. Dong n

Source: ORCID
Added: September 21, 2022

2022 journal article

Investigation of Gaussian mixture clustering model for online diagnosis of tip-wear in nanomachining

JOURNAL OF MANUFACTURING PROCESSES, 77, 114–124.

By: F. Cheng*, S. Zhai* & J. Dong n

co-author countries: China 🇨🇳 United States of America 🇺🇸

Contributors: F. Cheng*, S. Zhai* & J. Dong n

author keywords: Unsupervised machine learning; Gaussian Mixture Model; Statistical pattern recognition; Nanomachining; Tip Wear online diagnosis
Sources: Web Of Science, ORCID
Added: May 23, 2022

2022 article

Student perceptions of remote learning transitions in engineering disciplines during the COVID-19 pandemic: a cross-national study

Behera, A. K., Sousa, R. A., Oleksik, V., Dong, J., & Fritzen, D. (2022, June 4). EUROPEAN JOURNAL OF ENGINEERING EDUCATION, Vol. 48.

By: A. Behera*, R. Sousa*, V. Oleksik*, J. Dong n & D. Fritzen

co-author countries: United Kingdom of Great Britain and Northern Ireland 🇬🇧 Portugal 🇵🇹 Romania 🇷🇴 United States of America 🇺🇸

Contributors: A. Behera*, R. Sousa*, V. Oleksik*, J. Dong n & D. Fritzen

author keywords: E-learning; cross-sectional study; multivariate analysis; engineering; student preferences
Sources: ORCID, Web Of Science
Added: June 20, 2022

2021 journal article

AFM-Based nanofabrication and quality inspection of three-dimensional nanotemplates for soft lithography

JOURNAL OF MANUFACTURING PROCESSES, 66, 565–573.

By: J. Deng*, L. Jiang*, B. Si*, H. Zhou*, J. Dong n & P. Cohen n

co-author countries: United States of America 🇺🇸

Contributors: J. Deng*, L. Jiang*, B. Si*, H. Zhou*, J. Dong n & P. Cohen n

author keywords: Soft lithography; Solvent-assisted micromolding; Atomic force microscope (AFM); Ultrasonic vibration assisted nanomachining; Nanotemplate; Nanomolds; Quality
Sources: Web Of Science, ORCID
Added: June 10, 2021

2021 journal article

Achieving High-Resolution Electrohydrodynamic Printing of Nanowires on Elastomeric Substrates through Surface Modification

ACS APPLIED ELECTRONIC MATERIALS, 3(1), 192–202.

By: P. Ren n, Y. Liu n, R. Song n, B. O'Connor n, J. Dong n & Y. Zhu n

co-author countries: United States of America 🇺🇸

Contributors: P. Ren n, Y. Liu n, R. Song n, . B. O'Connor, J. Dong n & Y. Zhu n

author keywords: EHD printing; stretchable electronics; silver nanowires; PDMS surface modification; UVO treatment; polydopamine coating
Sources: Web Of Science, ORCID
Added: March 15, 2021

2021 journal article

Data-driven online detection of tip wear in tip-based nanomachining using incremental adaptive support vector machine

JOURNAL OF MANUFACTURING PROCESSES, 69, 412–421.

By: F. Cheng* & J. Dong n

co-author countries: China 🇨🇳 United States of America 🇺🇸

Contributors: F. Cheng* & J. Dong n

author keywords: AFM tip wear; Online detection; Statistical pattern recognition; Incremental adaptive learning; SVM classifier
Sources: Web Of Science, ORCID
Added: September 27, 2021

2021 article

Direct Fabrication of VIA Interconnects by Electrohydrodynamic Printing for Multi-Layer 3D Flexible and Stretchable Electronics

Ren, P., & Dong, J. (2021, June 27). ADVANCED MATERIALS TECHNOLOGIES, Vol. 6.

By: P. Ren n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: P. Ren n & J. Dong n

author keywords: direct metal printing; electrohydrodynamic printing; flexible and stretchable electronics; printed electronics; VIA interconnects
Sources: Web Of Science, ORCID
Added: July 6, 2021

2021 journal article

Programmable soft electrothermal actuators based on free-form printing of the embedded heater

SOFT MATTER, 17(9), 2577–2586.

By: Y. Cao & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: Y. Cao & J. Dong n

Sources: Web Of Science, ORCID
Added: April 12, 2021

2021 journal article

Self-Sensing and Control of Soft Electrothermal Actuator

IEEE-ASME TRANSACTIONS ON MECHATRONICS, 26(2), 854–863.

By: Y. Cao & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: Y. Cao & J. Dong n

author keywords: Actuators; Heating systems; Electrothermal actuators; Temperature measurement; Sensors; Cooling; Bending; Soft actuator; electrothermal actuator; resistive self-sensing; closed-loop control
Sources: Web Of Science, ORCID
Added: May 24, 2021

2020 conference paper

Fabrication and self-sensing control of soft electrothermal actuator

Procedia Manufacturing, 48, 43–48.

By: Y. Cao & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: Y. Cao & J. Dong n

author keywords: Soft electrothermal actuator; Electrohydrodynamic (EHD) printing; Self-sensing; Closed-loop control
Source: ORCID
Added: July 11, 2022

2020 journal article

Facile Approach to Fabricating Stretchable Organic Transistors with Laser-Patterned Ag Nanowire Electrodes

ACS APPLIED MATERIALS & INTERFACES, 12(45), 50675–50683.

By: R. Song n, S. Yao n, Y. Liu n, H. Wang n, J. Dong n, Y. Zhu n, . Brendan T. O'Connor

co-author countries: United States of America 🇺🇸

Contributors: R. Song n, S. Yao n, Y. Liu n, H. Wang n, J. Dong n, Y. Zhu n, . B.T. O'connor

author keywords: stretchable electronics; Ag nanowires; laser patterning; organic electronics; organic thin-film transistors
Sources: Web Of Science, ORCID
Added: February 1, 2021

2020 journal article

Study of tip wear for AFM-based vibration-assisted nanomachining process

Journal of Manufacturing Processes, 50, 47–56.

By: X. Kong n, J. Deng n, J. Dong n & P. Cohen n

co-author countries: United States of America 🇺🇸

Contributors: X. Kong n, J. Deng n, J. Dong n & P. Cohen n

author keywords: Tip-based nanomachining; Atomic force microscope (AFM); Tip wear monitoring; Tip wear modeling
Source: ORCID
Added: July 11, 2022

2019 journal article

Editorial: Welcome to engineering research express

Engineering Research Express, 1(1).

By: J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: J. Dong n

Source: ORCID
Added: July 11, 2022

2019 journal article

High-performance low-voltage soft electrothermal actuator with directly printed micro-heater

SENSORS AND ACTUATORS A-PHYSICAL, 297.

By: Y. Cao & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: Y. Cao & J. Dong n

author keywords: Soft actuator; Electrohydrodynamic (EHD) printing; Soft robotics; Electrothermal actuator
Sources: Web Of Science, ORCID
Added: November 11, 2019

2019 journal article

Monitoring tip-based nanomachining process by time series analysis using support vector machine

JOURNAL OF MANUFACTURING PROCESSES, 38, 158–166.

By: F. Cheng* & J. Dong n

co-author countries: China 🇨🇳 United States of America 🇺🇸

Contributors: F. Cheng* & J. Dong n

author keywords: AFM tip-based nanomachining; Process monitoring; Tip wear detection; Time series data; Support vector machine
Sources: Web Of Science, ORCID
Added: April 2, 2019

2019 journal article

Nano-machining AFM Tip Wear Monitoring Based on Time Series Data and Support Vector Machine,基于时间序列数据和支持向量机的纳米加工AFM刀尖损伤监测

Jiliang Xuebao/Acta Metrologica Sinica, 40(4), 647–654.

By: F. Cheng & J. Dong

Contributors: F. Cheng & J. Dong

Source: ORCID
Added: July 11, 2022

2019 journal article

Nanomaterial‐Enabled Flexible and Stretchable Sensing Systems: Processing, Integration, and Applications

Advanced Materials, 32(15), 1902343.

By: S. Yao n, P. Ren n, R. Song n, Y. Liu n, Q. Huang*, J. Dong n, B. O'Connor n, Y. Zhu n

co-author countries: United States of America 🇺🇸

Contributors: S. Yao n, P. Ren n, R. Song n, Y. Liu n, Q. Huang*, J. Dong n, . B.T. O'Connor, Y. Zhu n

author keywords: electronic skins; flexible and stretchable systems; flexible hybrid electronics; health and fitness tracking; human-machine interfaces
MeSH headings : Biosensing Techniques / instrumentation; Biosensing Techniques / methods; Blood Pressure; Electrocardiography; Equipment Design; Humans; Information Storage and Retrieval; Nanostructures / chemistry; Skin Physiological Phenomena; Volatile Organic Compounds / analysis; Wearable Electronic Devices
Sources: Web Of Science, ORCID, Crossref
Added: September 23, 2019

2019 conference paper

Three-dimensional nanomolds fabrication for nanoimprint lithography

Procedia Manufacturing, 34, 228–232.

By: J. Deng*, H. Zhou*, J. Dong n & P. Cohen n

co-author countries: United States of America 🇺🇸

Contributors: J. Deng*, H. Zhou*, J. Dong n & P. Cohen n

author keywords: Nanomolds; Atomic Force Microscope (AFM); Ultrasonic Vibration Assisted Nanomachining; Nanoimprint Lithography
Source: ORCID
Added: July 11, 2022

2018 journal article

Characterization and Modeling of Catalyst-free Carbon-Assisted Synthesis of ZnO Nanowires

JOURNAL OF MANUFACTURING PROCESSES, 32, 438–444.

By: X. Kong, C. Wei, Y. Zhu n, P. Cohen* & J. Dong*

co-author countries: United States of America 🇺🇸

Contributors: X. Kong, C. Wei, Y. Zhu n, P. Cohen* & J. Dong*

author keywords: ZnO nanowire synthesis; chemical vapor deposition (CVD); process modeling
Sources: Web Of Science, ORCID
Added: August 6, 2018

2018 journal article

Development and Characterization of Ultrasonic Vibration Assisted Nanomachining Process for Three-Dimensional Nanofabrication

IEEE TRANSACTIONS ON NANOTECHNOLOGY, 17(3), 559–566.

By: J. Deng*, J. Dong n & P. Cohen n

co-author countries: United States of America 🇺🇸

Contributors: J. Deng*, J. Dong n & P. Cohen n

author keywords: 3-D Nanomachining; tip-based nanofabrication; atomic force microscope (AFM); ultrasonic vibration assisted nanomachining
Sources: Web Of Science, ORCID
Added: August 6, 2018

2018 journal article

Electrohydrodynamic (EHD) Printing of Molten Metal Ink for Flexible and Stretchable Conductor with Self‐Healing Capability

Advanced Materials Technologies, 3(3).

By: Y. Han n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: Y. Han n & J. Dong n

author keywords: direct metal printing; electrohydrodynamic (EHD) printing; flexible and stretchable electronics; printed electronics; self-healing circuits
Source: ORCID
Added: July 11, 2022

2018 journal article

Electrohydrodynamic Printing for Advanced Micro/Nanomanufacturing: Current Progresses, Opportunities, and Challenges

JOURNAL OF MICRO AND NANO-MANUFACTURING, 6(4).

By: Y. Han n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: Y. Han n & J. Dong n

Sources: Web Of Science, ORCID
Added: December 31, 2018

2018 journal article

Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics

NANOSCALE, 10(15), 6806–6811.

By: Z. Cui n, Y. Han n, Q. Huang n, J. Dong n & Y. Zhu n

co-author countries: United States of America 🇺🇸

Contributors: Z. Cui n, Y. Han n, Q. Huang n, J. Dong n & Y. Zhu n

Sources: Web Of Science, ORCID
Added: August 6, 2018

2018 article

Fabrication of self-recoverable flexible and stretchable electronic devices

Han, Y., & Dong, J. (2018, July). JOURNAL OF MANUFACTURING SYSTEMS, Vol. 48, pp. 24–29.

By: Y. Han n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: Y. Han n & J. Dong n

author keywords: Electrohydrodynamic (EHD) printing; Metal printing; Printing electronics; Flexible and stretchable electronics; Self-recoverable
Sources: Web Of Science, ORCID
Added: October 29, 2018

2018 journal article

Modeling of Catalyst-free Growth Process of ZnO Nanowires

Procedia Manufacturing, 26, 349–358.

By: X. Kong n, C. Wei n, Y. Zhu n, P. Cohen n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: X. Kong n, C. Wei n, Y. Zhu n, P. Cohen n & J. Dong n

author keywords: ZnO nanowire synthesis; chemical vapor deposition (CVD); process modeling
Sources: ORCID, Crossref
Added: January 19, 2020

2018 journal article

Rapid Fabrication and Characterization of SERS Substrates

Procedia Manufacturing, 26, 580–586.

By: J. Deng*, J. Dong n & P. Cohen n

co-author countries: United States of America 🇺🇸

Contributors: J. Deng*, J. Dong n & P. Cohen n

author keywords: AFM-based nanofabrication; SERS substrates; ultrasonic vibration assisted nanomachining
Sources: ORCID, Crossref
Added: February 24, 2020

2017 journal article

AC-pulse modulated electrohydrodynamic jet printing and electroless copper deposition for conductive microscale patterning on flexible insulating substrates

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 43, 179–187.

By: H. Qin n, J. Dong n & Y. Lee n

co-author countries: United States of America 🇺🇸

Contributors: H. Qin n, J. Dong n & Y. Lee n

author keywords: Electrohydrodynamic jet printing; Electroless copper deposition; AC-pulse modulation; Direct printing; Micro-manufacturing
Sources: Web Of Science, ORCID
Added: August 6, 2018

2017 journal article

Design, modeling and testing of integrated ring extractor for high resolution electrohydrodynamic (EHD) 3D printing

Journal of Micromechanics and Microengineering, 27(3).

By: Y. Han* & J. Dong*

Contributors: Y. Han* & J. Dong*

author keywords: electrohydrodynamic (EHD) printing; ring extractor; electrostatic field; 3D printing
Sources: ORCID, NC State University Libraries
Added: August 6, 2018

2017 journal article

Direct Printing and Electrical Characterization of Conductive Micro-Silver Tracks by Alternating Current-Pulse Modulated Electrohydrodynamic Jet Printing

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 139(2).

By: H. Qin n, C. Wei n, J. Dong n & Y. Lee n

co-author countries: United States of America 🇺🇸

Contributors: H. Qin n, C. Wei n, J. Dong n & Y. Lee n

author keywords: electrohydrodynamic jet printing; drop-on-demand direct fabrication; inkjet printing; microtracks; silver nano-ink
Sources: Web Of Science, ORCID
Added: August 6, 2018

2017 journal article

Direct Printing of Capacitive Touch Sensors on Flexible Substrates by Additive E-Jet Printing With Silver Nanoinks

Journal of Manufacturing Science and Engineering-Transactions of the Asme, 139(3).

By: H. Qin n, Y. Cai n, J. Dong n & Y. Lee n

co-author countries: United States of America 🇺🇸

Contributors: H. Qin n, Y. Cai n, J. Dong n & Y. Lee n

author keywords: rapid prototyping; capacitive touch sensor; flexible substrates; inkjet printing
Source: ORCID
Added: July 11, 2022

2017 journal article

Fabrication and electrical characterization of multi-layer capacitive touch sensors on flexible substrates by additive e-jet printing

JOURNAL OF MANUFACTURING PROCESSES, 28, 479–485.

By: H. Qin*, J. Dong n & Y. Lee n

co-author countries: United States of America 🇺🇸

Contributors: H. Qin*, J. Dong n & Y. Lee n

author keywords: Electrohydrodynamic; Inkjet printing; Capacitive touch sensor; Silver nano
Sources: Web Of Science, ORCID
Added: August 6, 2018

2017 conference paper

High-Resolution Electrohydrodynamic (EHD) Direct Printing of Molten Metal

Procedia Manufacturing, 10, 845–850.

By: Y. Han n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: Y. Han n & J. Dong n

author keywords: Electrohydrodynamic (EHD); electrostatic field; metal printing; 3D printing
Source: ORCID
Added: July 11, 2022

2017 journal article

High-resolution direct printing of molten-metal using electrohydrodynamic jet plotting

Manufacturing Letters, 12, 6–9.

By: Y. Han n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: Y. Han n & J. Dong n

Source: ORCID
Added: July 11, 2022

2017 journal article

Modeling of the dynamic machining force of vibration-assisted nanomachining process

Journal of Manufacturing Processes, 28, 101–108.

By: X. Kong n, J. Dong n & P. Cohen n

co-author countries: United States of America 🇺🇸

Contributors: X. Kong n, J. Dong n & P. Cohen n

Sources: NC State University Libraries, ORCID
Added: August 6, 2018

2016 journal article

AFM-based 3D nanofabrication using ultrasonic vibration assisted nanomachining

JOURNAL OF MANUFACTURING PROCESSES, 24, 195–202.

By: J. Deng n, L. Zhang n, J. Dong n & P. Cohen n

co-author countries: United States of America 🇺🇸

Contributors: J. Deng n, L. Zhang n, J. Dong n & P. Cohen n

author keywords: 3D nanomachining; Atomic force microscope (AFM); Tip-based nanofabrication; Ultrasonic vibration assisted nanomachining
Sources: Web Of Science, ORCID
Added: August 6, 2018

2016 journal article

DIRECT PRINTING OF CAPACITIVE TOUCH SENSORS ON FLEXIBLE SUBSTRATES BY ADDITIVE E-JET PRINTING WITH SILVER NANOINKS

Proceedings of the Asme 11th International Manufacturing Science and Engineering Conference, 2016, Vol 1. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000388159100032&KeyUID=WOS:000388159100032

By: H. Qin, Y. Cai, J. Dong, Y. Lee & Asme

Contributors: H. Qin, Y. Cai, J. Dong, Y. Lee & Asme

Source: ORCID
Added: July 11, 2022

2016 article

Design of Integrated Ring Extractor for High Resolution Electrohydrodynamic (EHD) 3D Printing

44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44, Vol. 5, pp. 1031–1042.

By: Y. Han n, J. Dong n, A. Shih & L. Wang

co-author countries: United States of America 🇺🇸

Contributors: Y. Han n, J. Dong n, A. Shih & L. Wang

author keywords: Ring extractor; Electrohydrodynamic (EHD) printing; Electrostatic field; 3D printing
Sources: Web Of Science, ORCID
Added: August 6, 2018

2016 conference paper

Direct printing of capacitive touch sensors on flexible substrates by additive e-jet printing with silver nanoinks

Proceedings of the ASME 11th International Manufacturing Science and Engineering Conference, 2016, vol 1, 139(3).

By: H. Qin n, Y. Cai n, J. Dong n & Y. Lee n

co-author countries: United States of America 🇺🇸
Sources: NC State University Libraries, ORCID
Added: August 6, 2018

2016 conference paper

Direct printing of capacitive touch sensors on flexible substrates by additive e-jet printing with silver nanoinks

ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016, 1.

By: H. Qin, Y. Cai, J. Dong & Y. Lee

Contributors: H. Qin, Y. Cai, J. Dong & Y. Lee

Source: ORCID
Added: July 11, 2022

2016 journal article

Feedrate optimization for smooth minimum-time trajectory generation with higher order constraints

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 82(5-8), 1029–1040.

By: A. Bharathi n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: A. Bharathi n & J. Dong n

author keywords: Feedrate scheduling; Jerk constraints; Trajectory generation; Optimal control
Sources: Web Of Science, ORCID
Added: August 6, 2018

2016 article

High Rate 3D Nanofabrication by AFM-Based Ultrasonic Vibration Assisted Nanomachining

44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44, Vol. 5, pp. 1283–1294.

By: J. Deng n, J. Dong n, P. Cohen n, A. Shih & L. Wang

co-author countries: United States of America 🇺🇸

Contributors: J. Deng n, J. Dong n, P. Cohen n, A. Shih & L. Wang

author keywords: 3D nanomachining; Tip-based nanofabrication; Atomic Force Microscope (AFM); Ultrasonic vibration Assisted Nanomachining
Sources: Web Of Science, ORCID
Added: August 6, 2018

2016 article

Predictive modeling of feature dimension for tip-based nano machining process

Kong, X., Cohen, P. H., & Dong, J. (2016, October). JOURNAL OF MANUFACTURING PROCESSES, Vol. 24, pp. 338–345.

By: X. Kong n, P. Cohen n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: X. Kong n, P. Cohen n & J. Dong n

author keywords: Nanofabrication; Tip-based nano machining; Modeling of feature dimension
Sources: Web Of Science, ORCID
Added: August 6, 2018

2015 article

A Smooth Trajectory Generation Algorithm for Addressing Higher-Order Dynamic Constraints in Nanopositioning Systems

43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43, Vol. 1, pp. 216–225.

By: A. Bharathi n, J. Dong n, A. Shih & L. Wang

co-author countries: United States of America 🇺🇸

Contributors: A. Bharathi n, J. Dong n, A. Shih & L. Wang

author keywords: Feedrate Scheduling; Jerk Constraints; Trajectory Generation; Optimal Control
Sources: Web Of Science, ORCID
Added: August 6, 2018

2015 article

AFM-based 3D Nanofabrication using Ultrasonic Vibration Assisted Nanomachining

43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43, Vol. 1, pp. 584–592.

By: J. Deng n, L. Zhang n, J. Dong n, P. Cohen n, A. Shih & L. Wang

co-author countries: United States of America 🇺🇸

Contributors: J. Deng n, L. Zhang n, J. Dong n, P. Cohen n, A. Shih & L. Wang

author keywords: 3D nanomachining; Atomic force microscope (AFM); Tip-based nanofabrication; Ultrasonic vibration
Sources: Web Of Science, ORCID
Added: August 6, 2018

2015 journal article

Development of a high-resolution micro-torsion tester for measuring the shear modulus of metallic glass fibers

Measurement Science and Technology, 26(2), 025902.

By: Y. Dai*, Y. Huan*, M. Gao*, J. Dong*, W. Liu*, M. Pan*, W. Wang*, Z. Bi*

co-author countries: China 🇨🇳
author keywords: micro-scale; torsion; metallic glass fiber; shear modulus
Sources: Crossref, ORCID
Added: September 4, 2020

2015 journal article

Drop-on-demand E-jet printing of continuous interconnects with AC-pulse modulation on highly insulating substrates

JOURNAL OF MANUFACTURING SYSTEMS, 37, 505–510.

By: C. Wei n, H. Qin n, C. Chiu*, Y. Lee n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: C. Wei n, H. Qin n, C. Chiu*, Y. Lee n & J. Dong n

author keywords: Electrohydrodynamic (EHD) jet printing; Electrical interconnects; Drop-on-demand printing; AC-pulse modulation
Sources: Web Of Science, ORCID
Added: August 6, 2018

2015 journal article

Droplet formation and settlement of phase-change ink in high resolution electrohydrodynamic (EHD) 3D printing

JOURNAL OF MANUFACTURING PROCESSES, 20, 485–491.

By: Y. Han n, C. Wei n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: Y. Han n, C. Wei n & J. Dong n

author keywords: Electrohydrodynamic printing; FEA modeling; 3D printing; Phase-change ink
Sources: Web Of Science, ORCID
Added: August 6, 2018

2015 article

ELECTROHYDRODYNAMIC JET PRINTING OF SILVER SEEDS: MICRO SCALE PATTERNING BY ELECTROLESS COPPER DEPOSITION

PROCEEDINGS OF THE ASME 10TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2015, VOL 1.

By: H. Qin n, J. Dong n & Y. Lee n

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: August 6, 2018

2015 journal article

ELECTROHYDRODYNAMIC JET PRINTING OF SILVER SEEDS: MICRO SCALE PATTERNING BY ELECTROLESS COPPER DEPOSITION

Proceedings of the Asme 10th International Manufacturing Science and Engineering Conference, 2015, Vol 1. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000365146800073&KeyUID=WOS:000365146800073

By: H. Qin, J. Dong, Y. Lee & Asme

Contributors: H. Qin, J. Dong, Y. Lee & Asme

Source: ORCID
Added: July 11, 2022

2015 conference paper

Electrohydrodynamic jet printing of silver seeds: Micro scale patterning by electroless copper deposition

ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015, 1.

By: H. Qin, J. Dong & Y. Lee

Contributors: H. Qin, J. Dong & Y. Lee

Source: ORCID
Added: July 11, 2022

2015 article

Feedrate optimization and trajectory control for micro/nanopositioning systems with confined contouring accuracy

Bharathi, A., & Dong, J. (2015, July). PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 229, pp. 1193–1205.

By: A. Bharathi n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: A. Bharathi n & J. Dong n

author keywords: micro/nanomanufacturing; nanopositioning system; feedrate optimization; trajectory planning
Sources: Web Of Science, ORCID
Added: August 6, 2018

2015 journal article

MACHINING FORCE MODELING OF VIBRATION-ASSISTED NANO-MACHINING PROCESS

Proceedings of the Asme 10th International Manufacturing Science and Engineering Conference, 2015, Vol 2, 2.

By: X. Kong, L. Zhang, J. Dong, P. Cohen & Asme

Contributors: X. Kong, L. Zhang, J. Dong, P. Cohen & Asme

Source: ORCID
Added: July 11, 2022

2015 conference paper

Machining force modeling of vibration-assisted nano-machining process

Proceedings of the ASME 10th International Manufacturing Science and Engineering Conference, 2015, vol 2.

By: X. Kong n, L. Zhang n, J. Dong n & P. Cohen n

co-author countries: United States of America 🇺🇸
Sources: Crossref, ORCID
Added: August 6, 2018

2015 journal article

Roles of Hydroxyapatite Allocation and Microgroove Dimension in Promoting Preosteoblastic Cell Functions on Photocured Polymer Nanocomposites through Nuclear Distribution and Alignment

LANGMUIR, 31(9), 2851–2860.

By: M. Henry*, L. Cai*, X. Liu*, L. Zhang n, J. Dong n, L. Chen*, Z. Wang*, S. Wang*

co-author countries: China 🇨🇳 United States of America 🇺🇸

Contributors: M. Henry*, L. Cai*, X. Liu*, L. Zhang n, J. Dong n, L. Chen*, Z. Wang*, S. Wang*

MeSH headings : Animals; Caprolactam / chemistry; Caprolactam / pharmacology; Cell Adhesion / drug effects; Cell Line; Cell Nucleus / drug effects; Cell Nucleus / metabolism; Cell Proliferation / drug effects; Cell Shape / drug effects; Durapatite / chemistry; Gene Expression Regulation / drug effects; Light; Mice; Minerals / metabolism; Nanocomposites / chemistry; Osteoblasts / cytology; Osteoblasts / drug effects; Osteoblasts / metabolism; Tissue Engineering
Sources: Web Of Science, ORCID
Added: August 6, 2018

2015 chapter

Ultrasonic Vibration-Assisted Nanomachining

In Encyclopedia of Nanotechnology (pp. 1–9).

By: J. Dong*

Sources: Crossref, ORCID
Added: January 4, 2020

2014 conference paper

AC-pulse modulated electrohydrodynamic (EHD) direct printing of conductive micro silver tracks for micro-manufacturing

FAIM 2014 - Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing: Capturing Competitive Advantage via Advanced Manufacturing and Enterprise Transformation, 763–770. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960928060&partnerID=MN8TOARS

By: H. Qin, C. Wei, J. Dong & Y. Lee

Contributors: H. Qin, C. Wei, J. Dong & Y. Lee

Source: ORCID
Added: July 11, 2022

2014 article

DIRECT FABRICATION OF HIGHLY CONDUCTIVE MICRO SILVER TRACKS USING ELECTROHYDRODYNAMIC JET PRINTING FOR SUB-20 mu M MICRO-MANUFACTURING

PROCEEDINGS OF THE ASME 9TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2014, VOL 2, Vol. 2.

By: H. Qin n, C. Wei n, J. Dong n & Y. Lee n

co-author countries: United States of America 🇺🇸

Contributors: H. Qin n, C. Wei n, J. Dong n & Y. Lee n

author keywords: Electrohydrodynamic jet printing; Micro-manufacturing; Conductive silver tracks; Direct printing; Alternative current
Sources: Web Of Science, ORCID
Added: August 6, 2018

2014 journal article

Development and Modeling of Melt Electrohydrodynamic-Jet Printing of Phase-Change Inks for High-Resolution Additive Manufacturing

Journal of Manufacturing Science and Engineering-Transactions of the Asme, 136(6).

By: C. Wei n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: C. Wei n & J. Dong n

author keywords: electrohydrodynamic-jet printing; FEA modeling; phase-change ink; microscale additive manufacturing; 3D printing
Sources: ORCID, NC State University Libraries
Added: August 6, 2018

2014 conference paper

Drop-on-demand E-Jet printing of continuous features with AC-pulse modulation on highly insulating substrates

Transactions of the North American Manufacturing Research Institution of SME, 42(January), 345–352. http://www.scopus.com/inward/record.url?eid=2-s2.0-84938054378&partnerID=MN8TOARS

By: C. Wei, H. Qin, C. Chiu, Y. Lee & J. Dong

Contributors: C. Wei, H. Qin, C. Chiu, Y. Lee & J. Dong

Source: ORCID
Added: July 11, 2022

2014 journal article

High-resolution ac-pulse modulated electrohydrodynamic jet printing on highly insulating substrates

JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 24(4).

By: C. Wei n, H. Qin n, N. Ramirez-Iglesias*, C. Chiu*, Y. Lee n & J. Dong n

co-author countries: Puerto Rico 🇵🇷 United States of America 🇺🇸

Contributors: C. Wei n, H. Qin n, N. Ramírez-Iglesias*, C. Chiu*, Y. Lee n & J. Dong n

author keywords: AC-pulse modulation; drop-on-demand; electrohydrodynamic jet printing
Sources: Web Of Science, ORCID
Added: August 6, 2018

2014 journal article

Hybrid hierarchical fabrication of three-dimensional scaffolds

JOURNAL OF MANUFACTURING PROCESSES, 16(2), 257–263.

By: C. Wei n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: C. Wei n & J. Dong n

author keywords: Tissue engineering; Hierarchical scaffolds; Free-form fabrication; Electrohydrodynamic melt jet plotting
Sources: Web Of Science, ORCID
Added: August 6, 2018

2014 journal article

Robust control of a MEMS probing device

Ieee-Asme Transactions on Mechatronics, 19(1), 100–108.

By: X. Zhang*, B. Koo*, S. Salapaka*, J. Dong n & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: X. Zhang*, B. Koo*, S. Salapaka*, J. Dong n & P. Ferreira*

author keywords: Electrostatic comb drive; H-infinity control; microelectromechanical systems (MEMSs); nanopositioning; system identification
Sources: ORCID, NC State University Libraries
Added: August 6, 2018

2014 journal article

Super-resolution electrohydrodynamic (EHD) 3D printing of micro-structures using phase-change inks

Manufacturing Letters, 2(4), 96–99.

By: Y. Han n, C. Wei n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: Y. Han n, C. Wei n & J. Dong n

Source: ORCID
Added: July 11, 2022

2014 conference paper

Time-optimal feed-rate scheduling for nanopositioning systems with confined contouring error

Transactions of the North American Manufacturing Research Institution of SME, 42(January), 372–380. http://www.scopus.com/inward/record.url?eid=2-s2.0-84938059294&partnerID=MN8TOARS

By: A. Bharathi & J. Dong

Contributors: A. Bharathi & J. Dong

Source: ORCID
Added: July 11, 2022

2013 journal article

Direct fabrication of high-resolution three-dimensional polymeric scaffolds using electrohydrodynamic hot jet plotting

Journal of Micromechanics and Microengineering, 23(2).

By: C. Wei n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: C. Wei n & J. Dong n

Sources: ORCID, NC State University Libraries
Added: August 6, 2018

2013 conference paper

Hybrid hierarchical fabrication of three-dimensional scaffolds

Transactions of the North American Manufacturing Research Institution of SME, 41, 541–547. http://www.scopus.com/inward/record.url?eid=2-s2.0-84892703159&partnerID=MN8TOARS

By: C. Wei & J. Dong

Contributors: C. Wei & J. Dong

Source: ORCID
Added: July 11, 2022

2013 conference paper

Machining depth regulation and friction reduction in AFM-based ultrasonic vibration assisted nanomachining

Transactions of the North American Manufacturing Research Institution of SME, 41, 482–488. http://www.scopus.com/inward/record.url?eid=2-s2.0-84892764978&partnerID=MN8TOARS

By: L. Zhang, J. Dong & P. Cohen

Contributors: L. Zhang, J. Dong & P. Cohen

Source: ORCID
Added: July 11, 2022

2013 journal article

Material-Insensitive Feature Depth Control and Machining Force Reduction by Ultrasonic Vibration in AFM-Based Nanomachining

IEEE TRANSACTIONS ON NANOTECHNOLOGY, 12(5), 743–750.

By: L. Zhang n, J. Dong n & P. Cohen n

co-author countries: United States of America 🇺🇸

Contributors: L. Zhang n, J. Dong n & P. Cohen n

author keywords: Atomic force microscope (AFM); nanomachining; tip-based nanofabrication; ultrasonic vibration
Sources: Web Of Science, ORCID
Added: August 6, 2018

2013 journal article

Teaching a Multidisciplinary Nanotechnology Laboratory Course to Undergraduate Students

Journal of Nano Education, 5(1), 17–26.

By: Y. Zhu, J. Tracy*, J. Dong*, X. Jiang, M. Jones & G. Childers

Sources: Crossref, ORCID
Added: January 4, 2020

2012 journal article

A 2 Degree-of-Freedom SOI-MEMS Translation Stage With Closed-Loop Positioning

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 21(1), 13–22.

By: B. Koo*, X. Zhang*, J. Dong n, S. Salapaka* & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: B. Koo*, X. Zhang*, J. Dong n, S. Salapaka* & P. Ferreira*

author keywords: Closed-loop control; MEMS-scale nanopositioner; nanopositioning; parallel kinematic mechanism
Sources: Web Of Science, ORCID
Added: August 6, 2018

2012 journal article

A SOI-MEMS-BASED SINGLE AXIS ACTIVE PROBE FOR CELLULAR FORCE SENSING AND CELL MANIPULATION

Proceedings of the Asme International Mechanical Engineering Congress and Exposition (Imece 2010), Vol 10, 10, 537–542.

By: L. Zhang n, J. Dong n & Asme

co-author countries: United States of America 🇺🇸

Contributors: L. Zhang n, J. Dong n & Asme

Source: ORCID
Added: July 11, 2022

2012 conference paper

A process engineering perspective of scaffold fabrication methods in regenerative medicine: A review

62nd IIE Annual Conference and Expo 2012, 3096–3105. http://www.scopus.com/inward/record.url?eid=2-s2.0-84900330276&partnerID=MN8TOARS

By: G. Kazemi-Tutunchi, C. Wei, R. Shirwaiker & J. Dong

Contributors: G. Kazemi-Tutunchi, C. Wei, R. Shirwaiker & J. Dong

Source: ORCID
Added: July 11, 2022

2012 conference paper

A soi-mems-based single axis active probe for cellular force sensing and cell manipulation

Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), vol 10, 537–542.

By: L. Zhang & J. Dong

Source: NC State University Libraries
Added: August 6, 2018

2012 journal article

Biodegradable Photo-Crosslinked Polymer Substrates with Concentric Microgrooves for Regulating MC3T3-E1 Cell Behavior

ADVANCED HEALTHCARE MATERIALS, 1(3), 292–301.

By: K. Wang*, L. Cai*, L. Zhang n, J. Dong n & S. Wang*

co-author countries: United States of America 🇺🇸

Contributors: K. Wang*, L. Cai*, L. Zhang n, J. Dong n & S. Wang*

MeSH headings : 3T3 Cells; Absorbable Implants; Animals; Biocompatible Materials / chemistry; Biocompatible Materials / radiation effects; Bioprinting / instrumentation; Bioprinting / methods; Cell Adhesion / physiology; Cell Proliferation; Cross-Linking Reagents / chemistry; Cross-Linking Reagents / radiation effects; Light; Materials Testing; Mice; Polyesters / chemistry; Polyesters / radiation effects; Surface Properties; Tissue Engineering / methods
Sources: Web Of Science, ORCID
Added: August 6, 2018

2012 journal article

DESIGN OF A HIGH-BANDWIDTH XY NANOPOSITIONING STAGE FOR HIGH-THROUGHPUT MICRO/NANO MANUFACTURING

Proceedings of the Asme International Mechanical Engineering Congress and Exposition 2010, Vol 3, Pts a and B, 709–718. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000320286400084&KeyUID=WOS:000320286400084

By: S. Polit, J. Dong & Asme

Contributors: S. Polit, J. Dong & Asme

Source: ORCID
Added: July 11, 2022

2012 journal article

DIRECT-DEPOSITION AND MULTIPLE MATERIALS INTEGRATION OF TISSUE ENGINEERING SCAFFOLDS

Proceedings of the Asme International Mechanical Engineering Congress and Exposition 2010, Vol 3, Pts a and B, 1083–1088. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000320286400130&KeyUID=WOS:000320286400130

By: C. Wei, B. Sonawane, L. Cai, S. Wang, J. Dong & Asme

Contributors: C. Wei, B. Sonawane, L. Cai, S. Wang, J. Dong & Asme

Source: ORCID
Added: July 11, 2022

2012 conference paper

Design of a high-bandwidth XY nanopositioning stage for high-throughput micro/nano manufacturing

Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2010, vol 3, pts A and B, 709–718.

By: S. Polit & J. Dong

Source: NC State University Libraries
Added: August 6, 2018

2012 journal article

Design, Fabrication, and Testing of a SOI-MEMS-Based Active Microprobe for Potential Cellular Force Sensing Applications

Advances in Mechanical Engineering, 2012, 324–349.

By: L. Zhang n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: L. Zhang n & J. Dong n

Sources: ORCID, NC State University Libraries
Added: August 6, 2018

2012 conference paper

Direct-deposition and multiple materials integration of tissue engineering scaffolds

Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2010, vol 3, pts A and B, 1083–1088.

By: C. Wei, B. Sonawane, L. Cai, S. Wang & J. Dong

Source: NC State University Libraries
Added: August 6, 2018

2012 journal article

High-precision flexible fabrication of tissue engineering scaffolds using distinct polymers

Biofabrication, 4(2).

By: C. Wei n, L. Cai*, B. Sonawane n, S. Wang* & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: C. Wei n, L. Cai*, B. Sonawane n, S. Wang* & J. Dong n

Sources: ORCID, NC State University Libraries
Added: August 6, 2018

2012 journal article

High-rate tunable ultrasonic force regulated nanomachining lithography with an atomic force microscope

Nanotechnology, 23(8).

By: L. Zhang n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: L. Zhang n & J. Dong n

MeSH headings : Materials Testing; Microscopy, Atomic Force / methods; Nanostructures / chemistry; Nanostructures / ultrastructure; Nanotechnology / methods; Particle Size; Sonication / methods; Stress, Mechanical; Surface Properties
Sources: ORCID, NC State University Libraries
Added: August 6, 2018

2012 conference paper

Multi-material fabrication of tissue engineering scaffold

Transactions of the North American Manufacturing Research Institution of SME, 40, 126–132. http://www.scopus.com/inward/record.url?eid=2-s2.0-84869826114&partnerID=MN8TOARS

By: C. Wei, C. Lei, S. Wang & J. Dong

Contributors: C. Wei, C. Lei, S. Wang & J. Dong

Source: ORCID
Added: July 11, 2022

2012 journal article

Photocured Biodegradable Polymer Substrates of Varying Stiffness and Microgroove Dimensions for Promoting Nerve Cell Guidance and Differentiation

LANGMUIR, 28(34), 12557–12568.

By: L. Cai*, L. Zhang n, J. Dong n & S. Wang*

co-author countries: United States of America 🇺🇸

Contributors: L. Cai*, L. Zhang n, J. Dong n & S. Wang*

MeSH headings : Animals; Biocompatible Materials / chemistry; Biocompatible Materials / pharmacology; Cell Adhesion / drug effects; Cell Differentiation / drug effects; Cell Movement / drug effects; Cell Proliferation / drug effects; Mechanical Phenomena; Neuroglia / cytology; Neuroglia / drug effects; Neurons / cytology; Neurons / drug effects; PC12 Cells; Photochemical Processes; Polyesters / chemistry; Polyesters / pharmacology; Rats; Regeneration / drug effects; Tissue Scaffolds / chemistry
Sources: Web Of Science, ORCID
Added: August 6, 2018

2012 conference paper

Ultrasonic vibration assisted nanomachining on PMMA with an AFM

Technical Paper - Society of Manufacturing Engineers, TP12PUB71, 631–637. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880696152&partnerID=MN8TOARS

By: L. Zhang & J. Dong

Contributors: L. Zhang & J. Dong

Source: ORCID
Added: July 11, 2022

2011 conference paper

A two degree-of-freedom soi-mems translation stage with closed loop positioning

Proceedings - ASPE 2011 Annual Meeting, 52, 87–89. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884296523&partnerID=MN8TOARS

By: B. Koo, J. Dong & P. Ferreira

Contributors: B. Koo, J. Dong & P. Ferreira

Source: ORCID
Added: July 11, 2022

2011 journal article

Biodegradable elastomeric substrates with concentric microgrooves for regulating MC3T3 cell behavior

Abstracts of Papers of the American Chemical Society, 242. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000299378306557&KeyUID=WOS:000299378306557

By: K. Wang, L. Cai, L. Zhang, J. Dong & S. Wang

Contributors: K. Wang, L. Cai, L. Zhang, J. Dong & S. Wang

Source: ORCID
Added: July 11, 2022

2011 journal article

Biodegradable elastomeric substrates with micro-fabricated grooves for promoting neurite extension

Abstracts of Papers of the American Chemical Society, 242. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000299378306551&KeyUID=WOS:000299378306551

By: L. Cai, L. Zhang, J. Dong & S. Wang

Contributors: L. Cai, L. Zhang, J. Dong & S. Wang

Source: ORCID
Added: July 11, 2022

2011 journal article

Development of a High-Bandwidth XY Nanopositioning Stage for High-Rate Micro-/Nanomanufacturing

IEEE-ASME TRANSACTIONS ON MECHATRONICS, 16(4), 724–733.

By: S. Polit n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: S. Polit n & J. Dong n

author keywords: Flexure stage; nanopositioning; parallel kinematic mechanism (PKM); piezoelectric actuator
Sources: Web Of Science, ORCID
Added: August 6, 2018

2010 journal article

Combined H-infinity-Feedback Control and Iterative Learning Control Design With Application to Nanopositioning Systems

IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 18(2), 336–351.

By: B. Helfrich*, C. Lee*, D. Bristow*, X. Xiao*, J. Dong n, A. Alleyne*, S. Salapaka*, P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: B. Helfrich*, C. Lee*, D. Bristow*, X. Xiao*, J. Dong n, A. Alleyne*, S. Salapaka*, P. Ferreira*

author keywords: Iterative learning control (ILC); nanopositioning; precision motion control (PMC)
Sources: Web Of Science, ORCID
Added: August 6, 2018

2010 conference paper

Design of a high-bandwidth XY nanopositioning stage for high-throughput micro/nano manufacturing

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 3(PARTS A AND B), 709–718.

By: S. Polit n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: S. Polit n & J. Dong n

Source: ORCID
Added: July 11, 2022

2010 conference paper

Direct-deposition and multiple materials integration of tissue engineering scaffolds

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 3(PARTS A AND B), 1083–1088.

By: C. Wei n, B. Sonawane n, L. Cai*, S. Wang* & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: C. Wei n, B. Sonawane n, L. Cai*, S. Wang* & J. Dong n

Source: ORCID
Added: July 11, 2022

2010 journal article

NANO-MANIPULATION DEVICE WITH PARALLEL KINEMATIC MICRO-POSITIONING STAGE AND INTEGRATED ACTIVE CANTILEVER

Imece 2009: Proceedings of the Asme International Mechanical Engineering Congress and Exposition, Vol 12, Pts a and B, 405–413. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000280203700060&KeyUID=WOS:000280203700060

By: J. Dong, P. Ferreira & Asme

Contributors: J. Dong, P. Ferreira & Asme

Source: ORCID
Added: July 11, 2022

2010 conference paper

Nano-manipulation device with parallel kinematic micro-positioning stage and integrated active cantilever

Imece 2009: Proceedings of the Asme International Mechanical Engineering Congress and Exposition, Vol 12, Pts a and B, 12(PART A), 405–413.

By: J. Dong n, P. Ferreira* & Asme

co-author countries: United States of America 🇺🇸

Contributors: J. Dong n & P. Ferreira*

Source: ORCID
Added: July 11, 2022

2009 journal article

Design of high-bandwidth high-precision flexure-based nanopositioning modules

JOURNAL OF MANUFACTURING SYSTEMS, 28(2-3), 71–77.

By: S. Polit n & J. Dong n

co-author countries: United States of America 🇺🇸

Contributors: S. Polit n & J. Dong n

Sources: Web Of Science, ORCID
Added: August 6, 2018

2009 journal article

Electrostatically Actuated Cantilever With SOI-MEMS Parallel Kinematic XY Stage

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 18(3), 641–651.

By: J. Dong n & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong n & P. Ferreira*

author keywords: Active cantilever; comb drive; micropositioning stage; parallel kinematic mechanism (PKM); tilt-plate actuator
Sources: Web Of Science, ORCID
Added: August 6, 2018

2008 journal article

A SOI-MEMS-based 3-DOF planar parallel-kinematics nanopositioning stage

Sensors and Actuators a-Physical, 147(1), 340–351.

By: D. Mukhopadhyay*, J. Dong*, E. Pengwang* & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: D. Mukhopadhyay*, J. Dong*, E. Pengwang* & P. Ferreira*

author keywords: SOI-MEMS; 3-DOF planar PKMs; micro/nanopositioning stages; MEMS-XY theta stages
Source: ORCID
Added: July 11, 2022

2008 journal article

A novel parallel-kinematics mechanism for integrated, multi-axis nanopositioning - Part 2: Dynamics, control and performance analysis

Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology, 32(1), 20–33.

By: J. Dong*, Q. Yao* & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong*, Q. Yao* & P. Ferreira*

author keywords: nano-positioning; parallel-kinematics; flexure stage; motion control; contouring errors
Source: ORCID
Added: July 11, 2022

2008 journal article

A novel parallel-kinematics mechanisms for integrated, multi-axis nanopositioning - Part 1. Kinematics and design for fabrication

Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology, 32(1), 7–19.

By: Q. Yao, J. Dong* & P. Ferreira

Contributors: Q. Yao, J. Dong* & P. Ferreira

author keywords: nanopositioning; parallel-kinematics; flexure stage; kinematic analysis; stage design
Source: ORCID
Added: July 11, 2022

2008 chapter

Combined H-infinity-feedback and Iterative Learning Control design with application to nanopositioning systems

In 2008 American Control Conference, Vols 1-12 (pp. 3893–3900).

By: B. Helfrich*, C. Lee*, D. Bristow*, X. Xiao*, J. Dong*, A. Alleyne*, S. Salapaka*, P. Ferreira*, Ieee

co-author countries: United States of America 🇺🇸

Contributors: B. Helfrich*, C. Lee*, D. Bristow*, X. Xiao*, J. Dong*, A. Alleyne*, S. Salapaka*, P. Ferreira*, Ieee

Source: ORCID
Added: July 11, 2022

2008 journal article

High bandwidth control of precision motion instrumentation

Review of Scientific Instruments, 79(10).

By: D. Bristow*, J. Dong*, A. Alleyne*, P. Ferreira* & S. Salapaka*

co-author countries: United States of America 🇺🇸

Contributors: D. Bristow*, J. Dong*, A. Alleyne*, P. Ferreira* & S. Salapaka*

author keywords: adaptive control; feedforward; iterative methods; learning systems; motion control; physical instrumentation control; piezoelectric actuators
Source: ORCID
Added: July 11, 2022

2008 journal article

MIMO H-infinity control of a parallel kinematic XYZ nano-positioner

International Mechanical Engineering Congress and Exposition 2007, Vol 11 Pt a and Pt B: Micro and Nano Systems, 145–153.

By: J. Dong, S. Salapaka, P. Ferreira & Asme

Source: ORCID
Added: July 11, 2022

2008 conference paper

MIMO H∞ control of a parallel kinematic XYZ nano-positioner

ASME International Mechanical Engineering Congress and Exposition, Proceedings, 11 PART A, 145–153.

By: J. Dong*, S. Salapaka* & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong*, S. Salapaka* & P. Ferreira*

Source: ORCID
Added: July 11, 2022

2008 chapter

Parallel kinematic mechanism based monolithic XY micro-positioning stage with rotary comb drive actuators - art. no. 688209

In Micromachining and Microfabrication Process Technology Xiii (Vol. 6882, p. 88209).

By: D. Mukhopadhyay*, J. Dong*, P. Ferreira*, M. Maher, J. Chiao & P. Resnick

co-author countries: United States of America 🇺🇸

Contributors: D. Mukhopadhyay*, J. Dong* & P. Ferreira*

author keywords: rotary comb drives; nano positioning; micro positioning; silicon-on-insulator; parallel kinematic mechanism
Source: ORCID
Added: July 11, 2022

2008 conference paper

Parallel-kinematics mems stages for high precision nanopositioning and manipulation

Proceedings of the 23rd Annual Meeting of the American Society for Precision Engineering, ASPE 2008 and the 12th ICPE. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884962392&partnerID=MN8TOARS

By: J. Dong, D. Mukhopadhyay, E. Pengwang & P. Ferreira

Contributors: J. Dong, D. Mukhopadhyay, E. Pengwang & P. Ferreira

Source: ORCID
Added: July 11, 2022

2008 journal article

Robust control of a parallel-kinematic nanopositioner

Journal of Dynamic Systems, Measurement, and Control, 130(4), 0410071–04100715.

By: J. Dong*, S. Salapaka* & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong*, S. Salapaka* & P. Ferreira*

Source: ORCID
Added: July 11, 2022

2008 chapter

Self-calibration of a dual-actuated single-axis nanopositioner using measurement transitivity with extensions to calibration of two-axis systems

In M. T. Postek & J. A. Allgair (Eds.), Instrumentation, Metrology, and Standards for Nanomanufacturing Ii (Vol. 7042).

By: Y. Jeong*, J. Dong* & P. Ferreira*

co-author countries: Korea (Republic of) 🇰🇷 United States of America 🇺🇸

Contributors: Y. Jeong*, J. Dong* & P. Ferreira*

Ed(s): M. Postek & J. Allgair

Event: at Bellingham

author keywords: nanopositioning; self-calibration; flexure stage; metrology; auto-calibration; machine-tool calibration; positioning error; position sensing
Source: ORCID
Added: July 11, 2022

2008 journal article

Self-calibration of dual-actuated single-axis nanopositioners

Measurement Science &Amp; Technology, 19(4).

By: Y. Jeong*, J. Dong* & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: Y. Jeong*, J. Dong* & P. Ferreira*

author keywords: self-calibration; auto-calibration; nanopositioning; metrology; dual-stage actuation
Source: ORCID
Added: July 11, 2022

2008 journal article

Simultaneous actuation and displacement sensing for electrostatic drives

Journal of Micromechanics and Microengineering, 18(3).

By: J. Dong* & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong* & P. Ferreira*

Source: ORCID
Added: July 11, 2022

2007 journal article

Design, analysis, fabrication and testing of a parallel-kinematic micropositioning XY stage

International Journal of Machine Tools &Amp; Manufacture, 47(6), 946–961.

By: Q. Yao*, J. Dong* & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: Q. Yao*, J. Dong* & P. Ferreira*

author keywords: micropositioning; nanopositioning; XY stage; parallel kinematics; piezoelectric actuator; flexure stage
Source: ORCID
Added: July 11, 2022

2007 journal article

Design, fabrication and testing of a silicon-on-insulator (SOI) MEMS parallel kinematics XY stage

Journal of Micromechanics and Microengineering, 17(6), 1154–1161.

By: J. Dong*, D. Mukhopadhyay* & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong*, D. Mukhopadhyay* & P. Ferreira*

Source: ORCID
Added: July 11, 2022

2007 journal article

Feed-rate optimization with jerk constraints for generating minimum-time trajectories

International Journal of Machine Tools &Amp; Manufacture, 47(12-13), 1941–1955.

By: J. Dong*, P. Ferreira* & J. Stori*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong*, P. Ferreira* & J. Stori*

author keywords: trajectory planning; minimum-time trajectory; optimal control; feed-rate optimization; NC programming; jerk constraints
Source: ORCID
Added: July 11, 2022

2007 conference paper

MIMO H∞ control of a parallel kinematic XYZ nano-positioner

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 11, 145–153.

By: J. Dong, S. Salapaka & P. Ferreira

Contributors: J. Dong, S. Salapaka & P. Ferreira

Source: ORCID
Added: July 11, 2022

2007 journal article

Optimal feed-rate scheduling for high-speed contouring

Journal of Manufacturing Science and Engineering-Transactions of the Asme, 129(1), 63–76.

By: J. Dong* & J. Stori*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong* & J. Stori*

author keywords: high-speed machining; contour error; feed-rate optimization
Source: ORCID
Added: July 11, 2022

2007 journal article

Printable single-crystal silicon micro/nanoscale ribbons, platelets and bars generated from bulk wafers

Advanced Functional Materials, 17(16), 3051–3062.

By: A. Baca*, M. Meitl*, H. Ko*, S. Mack*, H. Kim*, J. Dong*, P. Ferreira*, J. Rogers*

co-author countries: United States of America 🇺🇸

Contributors: A. Baca*, M. Meitl*, H. Ko*, S. Mack*, H. Kim*, J. Dong*, P. Ferreira*, J. Rogers*

Source: ORCID
Added: July 11, 2022

2007 conference paper

Robust MIMO control of a parallel kinematics nano-positioner for high resolution high bandwidth tracking and repetitive tasks

Proceedings of the IEEE Conference on Decision and Control, 4495–4500.

By: J. Dong*, S. Salapaka* & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong*, S. Salapaka* & P. Ferreira*

Source: ORCID
Added: July 11, 2022

2007 chapter

Robust MIMO control of a parallel kinematics nano-positioner for high resolution high bandwidth tracking and repetitive tasks

In Proceedings of the 46th Ieee Conference on Decision and Control, Vols 1-14 (pp. 1899–1904). http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000255181701011&KeyUID=WOS:000255181701011

By: J. Dong, S. Salapaka, P. Ferreira & Ieee

Contributors: J. Dong, S. Salapaka, P. Ferreira & Ieee

Source: ORCID
Added: July 11, 2022

2007 journal article

Stress focusing for controlled fracture in microelectromechanical systems

Applied Physics Letters, 90(8).

By: M. Meitl*, X. Feng*, J. Dong*, E. Menard*, P. Ferreira*, Y. Huang*, J. Rogers

co-author countries: United States of America 🇺🇸

Contributors: M. Meitl*, X. Feng*, J. Dong*, E. Menard*, P. Ferreira*, Y. Huang*, J. Rogers

Source: ORCID
Added: July 11, 2022

2006 journal article

A generalized time-optimal bidirectional scan algorithm for constrained feed-rate optimization

Journal of Dynamic Systems, Measurement, and Control, 128(2), 379–390.

By: J. Dong* & J. Stori*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong* & J. Stori*

author keywords: two-pass (bidirectional scan) algorithm; minimum-time trajectory; optimal control; feed-rate optimization
Source: ORCID
Added: July 11, 2022

2004 conference paper

A generalized time-optimal Bi-directional scan algorithm for constrained feedrate optimization

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 15, 725–739.

By: J. Dong* & J. Stori*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong* & J. Stori*

Source: ORCID
Added: July 11, 2022

2004 journal article

Development of a high-speed 3-axis machine tool using a novel parallel-kinematics X-Y table

International Journal of Machine Tools &Amp; Manufacture, 44(12-13), 1355–1371.

By: J. Dong*, C. Yuan*, J. Stori* & P. Ferreira*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong*, C. Yuan*, J. Stori* & P. Ferreira*

author keywords: high-speed machining; parallel-kinematics machine tool
Source: ORCID
Added: July 11, 2022

2003 conference paper

Optimal feed-rate scheduling for high-speed contouring

Manufacturing, 14, 497–513.

By: J. Dong* & J. Stori*

co-author countries: United States of America 🇺🇸

Contributors: J. Dong* & J. Stori*

Source: ORCID
Added: July 11, 2022

Employment

Updated: September 4th, 2020 00:51

2020 - present

North Carolina State University Raleigh, NC, US
Professor Department of Industrial and Systems Engineering

2014 - 2020

North Carolina State University Raleigh, NC, US
Associate Professor Department of Industrial and Systems Engineering

2008 - 2014

North Carolina State University Raleigh, NC, US
Assistant Professor Department of Industrial and Systems Engineering

Education

Updated: May 11th, 2021 11:52

2006 - 2008

University of Illinois at Urbana-Champaign Urbana, Illinois, US
PostDoc Mechanical Engineering

2001 - 2006

University of Illinois at Urbana-Champaign Urbana, IL, US
PhD Mechanical and Industrial Engineering

1998 - 2001

Institute of Automation, Chinese Academy of Sciences Beijing, CN
M.S.

1993 - 1998

University of Science and Technology of China Hefei, Anhui, CN
B.S.

Funding History

Funding history based on the linked ORCID record. Updated: June 21st, 2022 10:40

grant January 1, 2022 - December 31, 2025
FMRG: Eco: Future Eco Manufacturing of Recyclable Soft Electronics
Directorate for Engineering
grant July 1, 2017 - June 30, 2022
SNM: Large-area Printing and Integration of Metal Nanowires and Organic Semiconductors for Stretchable Electronics and Sensors
Directorate for Engineering
grant December 1, 2013 - November 30, 2017
SNM: Continuous Vapor-Phase Processes for Nano-Functional Fibrous Materials Manufacturing
Directorate for Engineering
grant September 1, 2013 - August 31, 2018
Investigation of Electrohydrodynamic 3D Printing for Super-Resolution Additive Manufacturing
Directorate for Engineering
grant September 15, 2012 - August 31, 2016
Ultrasonic Vibration Assisted NanoMachining for High-rate Tunable 2D and 3D Nanofabrication
Directorate for Engineering
grant September 1, 2011 - August 31, 2015
Collaborative Research: Defect Modeling and Process Optimization for Nanowire Growth towards Improved Nanodevice Reliability
Directorate for Engineering
grant March 15, 2011 - May 31, 2013
EAGER: Engineering for Regenerative Medicine
Directorate for Engineering
grant January 1, 2011 - June 30, 2013
Bottom-Up Meets Top-Down - An Integrated Undergraduate Nanotechnology Laboratory at NC State
Directorate for Engineering
grant July 1, 2008 - June 30, 2012
A Configurable Platform for Multicantilever High-Throughput Nanoscale Metrology and Manufacturing
Directorate for Engineering

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.