Albert J. Shih Guduru, R. K., Darling, K. A., Scattergood, R. O., Koch, C. C., Murty, K. L., Bakkal, M., & Shih, A. J. (2006). Shear punch tests for a bulk metallic glass. INTERMETALLICS, 14(12), 1411–1416. https://doi.org/10.1016/j.intermet.2006.01.052 Lemaster, R. L., Shih, A. J., & Yu, Z. (2005). Blasting and erosion wear of wood using sodium bicarbonate and plastic media. Forest Products Journal, 55(5), 59–64. Bakkal, M., Shih, A. J., & Scattergood, R. O. (2004). Chip formation, cutting forces, and tool wear in turning of Zr-based bulk metallic glass. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 44(9), 915–925. https://doi.org/10.1016/j.ijmachtools.2004.02.002 Hardin, C. W., Shih, A. J., & Lemaster, R. L. (2004). Diamond wire machining of wood. Forest Products Journal, 54(11), 50–55. Bakkal, M., Shih, A. J., Scattergood, R. O., & Liu, C. T. (2004). Machining of a Zr-Ti-Al-Cu-Ni metallic glass. SCRIPTA MATERIALIA, 50(5), 583–588. https://doi.org/10.1016/j.scriptamat.2003.11.052 Shih, A. J., Scattergood, R. O., Curry, A. C., Yonushonis, T. M., Gust, D. J., Grant, M. B., … Watkins, T. R. (2003). Cost-effective grinding of zirconia using the dense vitreous bond silicon carbide wheel. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 125(2), 297–303. https://doi.org/10.1115/1.1559167 Garrell, M. G., Shih, A. J., Lara-Curzio, E., & Scattergood, R. O. (2003). Finite-element analysis of stress concentration in ASTM D 638 tension specimens. Journal of Testing and Evaluation, 31(1), 52–57. Boothe, B. J., Shih, A. J., Kong, N., & Roberts, W. L. (2003). Goniometric characteristics of optical fibres for temperature measurement in diesel engine exhaust filters. MEASUREMENT SCIENCE AND TECHNOLOGY, 14(5), 563–572. https://doi.org/10.1088/0957-0233/14/5/305 Curry, A. C., Shih, A. J., Kong, J., Scattergood, R. O., & McSpadden, S. B. (2003). Grinding temperature measurements in magnesia-partially-stabilized zirconia using infrared spectrometry. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 86(2), 333–341. https://doi.org/10.1111/j.1151-2916.2003.tb00019.x Garrell, M. G., Shih, A. J., Ma, B. M., Lara-Curzio, E., & Scattergood, R. O. (2003). Mechanical properties of Nylon bonded Nd-Fe-B permanent magnets. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 257(1), 32–43. https://doi.org/10.1016/S0304-8853(02)00983-6 Garrell, M. G., Ma, B. M., Shih, A. J., Lara-Curzio, E., & Scattergood, R. O. (2003). Mechanical properties of polyphenylene-sulfide (PPS) bonded NdFe-B permanent magnets. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 359(1-2), 375–383. https://doi.org/10.1016/s0921-5093(03)00400-3 Qu, J., Riester, L., Shih, A. J., Scattergood, R. O., Lara-Curzio, E., & Watkins, T. R. (2003). Nanoindentation characterization of surface layers of electrical discharge machined WC-Co. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 344(1-2), 125–131. https://doi.org/10.1016/s0921-5093(02)00395-7 Strenkowski, J. S., Shih, A. J., & Lin, J. C. (2002). An analytical finite element model for predicting three-dimensional tool forces and chip flow. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 42(6), 723–731. https://doi.org/10.1016/S0890-6955(01)00162-6 Qu, J., Shih, A. J., & Scattergood, R. O. (2002). Development of the cylindrical wire electrical discharge machining process, part 1: Concept, design, and material removal rate. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 124(3), 702–707. https://doi.org/10.1115/1.1475321 Qu, J., Shih, A. J., & Scattergood, R. O. (2002). Development of the cylindrical wire electrical discharge machining process, part 2: Surface integrity and roundness. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 124(3), 708–714. https://doi.org/10.1115/1.1475989 Shih, A. J., & Yan, H. S. (2002). Synthesis of a single-loop, overconstrained six revolute joint spatial mechanism for two-position cylindrical rigid body guidance. MECHANISM AND MACHINE THEORY, 37(1), 61–73. https://doi.org/10.1016/S0094-114X(01)00055-6 Rhoney, B. K., Shih, A. J., Scattergood, R. O., Ott, R., & McSpadden, S. B. (2002). Wear mechanism of metal bond diamond wheels trued by wire electrical discharge machining. WEAR, 252(7-8), 644–653. https://doi.org/10.1016/S0043-1648(02)00019-4 Rhoney, B. K., Shih, A. J., Scattergood, R. O., Akemon, J. L., Gust, D. J., & Grant, M. B. (2002). Wire electrical discharge machining of metal bond diamond wheels for ceramic grinding. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 42(12), 1355–1362. https://doi.org/10.1016/S0890-6955(02)00056-1 Shih, A. J. (2001). A new regulating wheel truing method for through-feed centerless grinding. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 123(2), 319–324. https://doi.org/10.1115/1.1366684 Shih, A. J., & Akemon, J. L. (2001, October). Wear of the blade diamond tools in truing vitreous bond grinding wheels - Part I. Wear measurement and results. WEAR, Vol. 250, pp. 587–592. https://doi.org/10.1016/S0043-1648(01)00610-X Shih, A. J., Clark, W. I., & Akemon, J. L. (2001, October). Wear of the blade diamond tools in truing vitreous bond grinding wheels - Part II. Truing and grinding forces and wear mechanism. WEAR, Vol. 250, pp. 593–603. https://doi.org/10.1016/S0043-1648(01)00611-1 Shih, A. J. (2000). An experimental investigation of rotary diamond truing and dressing of vitreous bond wheels for ceramic grinding. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 40(12), 1755–1774. https://doi.org/10.1016/S0890-6955(00)00022-5 Shih, A. J., McSpadden, S. B., Morris, T. O., Grant, M. B., & Yonushonis, T. M. (2000). High speed and high material removal rate grinding of ceramics using the vitreous bond CBN wheel. MACHINING SCIENCE AND TECHNOLOGY, 4(1), 43–58. https://doi.org/10.1080/10940340008945699 Shih, A. J., & Lee, N. L. (1999). Precision cylindrical face grinding. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 23(3), 177–184. https://doi.org/10.1016/S0141-6359(99)00008-2 Tricard, M., Gust, D. J., & Shih, A. J. (1999). Systems approach for the ceramic thru-feed centerless grinding. MACHINING SCIENCE AND TECHNOLOGY, 3(2), 201–219. https://doi.org/10.1080/10940349908945690 Tu, J. F., Corless, M., Gehrich, M. J., & Shih, A. J. (1998). Experimental study of a precision, hydrodynamic wheel spindle for submicron cylindrical grinding. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 22(1), 43–57. https://doi.org/10.1016/S0141-6359(98)00003-8 Shih, A. J., Yonushonis, T. M., Grant, M. B., Morris, T. O., & McSpadden, S. B. (1998). High speed and high material removal rate grinding of ceramics using the vitreous bond CBN wheel. ASPE 13th annual meeting, St. Louis, MO, Oct. 25-30, 1998, (1998), 25–30. Shih, A. J. (1998). Rotary truing of vitreous bond diamond grinding wheels using metal bond diamond disks. MACHINING SCIENCE AND TECHNOLOGY, 2(1), 13–28. https://doi.org/10.1080/10940349808945656 Shih, A. J., Yonushonis, T. M., Grant, M. B., Morris, T. O., & McSpadden, S. B. (1998). Vitreous bond CBN wheel for high speed grinding of ceramic and M2 steel. Transaction of 26th NAMRC (North American Manufacturing Research Conference), 1998, (1998), 195–200.