Yuntian T Zhu

Joint Theoretical and Experimental Study of Stress Graphitization in Aligned Carbon Nanotube/Carbon Matrix Composites

ACS APPLIED MATERIALS & INTERFACES, 15(27), 32656–32666.

Probing the Respective Strengthening Mechanism of High-entropy (CoCrFeNi/CoCrFeNiMn) and Single-principle-element (Cu-4Al) Alloys

JOURNAL OF ALLOYS AND COMPOUNDS, 969.

Achieving high hetero-deformation induced (HDI) strengthening and hardening in brass by dual heterostructures

Fang, X. T., Li, Z. K., Wang, Y. F., Ruiz, M., Ma, X. L., Wang, H. Y., … Zhu, Y. T. (2022, January 30).

Length-dependent carbon nanotube film structures and mechanical properties

NANOTECHNOLOGY, 32(26).

Critical microstructures and defects in heterostructured materials and their effects on mechanical properties

ACTA MATERIALIA, 189, 129–144.

Ductility and strain hardening in gradient and lamellar structured materials

SCRIPTA MATERIALIA, 186, 321–325.

Effect of dislocation configuration on Ag segregation in subgrain boundary of a Mg-Ag alloy

SCRIPTA MATERIALIA, 191, 219–224.

Effect of heterostructure and hetero-deformation induced hardening on the strength and ductility of brass

ACTA MATERIALIA, 186, 644–655.

Hetero-deformation induced strengthening and toughening of pure iron with inverse and multi-gradient structures

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 782.

Heterostructured materials: superior properties from hetero-zone interaction

MATERIALS RESEARCH LETTERS, 9(1), 1–31.

Improving mechanical properties of heterogeneous Mg-Gd alloy laminate via accumulated extrusion bonding

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 785.

Influence of Strain Rate on Mechanical Behaviours of Gradient-Structured Copper

MATERIALS TRANSACTIONS, 61(4), 708–717.

Microstructural softening induced adiabatic shear banding in Ti-23Nb-0.7Ta-2Zr-O gum metal

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 54, 31–39.

Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys

MATERIALS TODAY, 41, 62–71.

Shear band stability and uniform elongation of gradient structured material: Role of lateral constraint

EXTREME MECHANICS LETTERS, 37.

Tuning heterostructures with powder metallurgy for high synergistic strengthening and hetero-deformation induced hardening

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 777.

Ultrastrong low-carbon nanosteel produced by heterostructure and interstitial mediated warm rolling

SCIENCE ADVANCES, 6(39).

Achieving Gradient Martensite Structure and Enhanced Mechanical Properties in a Metastable beta Titanium Alloy

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A(5), 2126–2138.

Alloying effects on the plasticity of magnesium: comprehensive analysis of influences of all five slip systems

JOURNAL OF PHYSICS-CONDENSED MATTER, 32(1).

Atomic segregation at twin boundaries in a Mg-Ag alloy

SCRIPTA MATERIALIA, 178, 193–197.

Dense dispersed shear bands in gradient-structured Ni

INTERNATIONAL JOURNAL OF PLASTICITY, 124, 186–198.

Enhanced irradiation and corrosion resistance of 316LN stainless steel with high densities of dislocations and twins

JOURNAL OF NUCLEAR MATERIALS, 517, 234–240.

Extra strengthening in a coarse/ultrafine grained laminate: Role of gradient interfaces

INTERNATIONAL JOURNAL OF PLASTICITY, 123, 196–207.

Formation of solute nanostructures in an Al-Zn-Mg alloy during long-term natural aging

JOURNAL OF ALLOYS AND COMPOUNDS, 821.

Grain refinement and mechanical properties of pure aluminum processed by accumulative extrusion bonding

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 29(3), 437–447.

Grain size effect on deformation twin thickness in a nanocrystalline metal with low stacking-fault energy

JOURNAL OF MATERIALS RESEARCH, 34(13), 2398–2405.

Heterostructure induced dispersive shear bands in heterostructured Cu

SCRIPTA MATERIALIA, 170, 76–80.

Improved corrosion resistance of 316LN stainless steel performed by rotationally accelerated shot peening

APPLIED SURFACE SCIENCE, 481, 1305–1312.

Improving the high-temperature ductility of Al composites by tailoring the nanoparticle network

MATERIALIA, 9.

In-situ observation of dislocation dynamics near heterostructured interfaces

MATERIALS RESEARCH LETTERS, 7(9), 376–382.

Influence of annealing parameters on the mechanical properties of heterogeneous lamella structured 5083 aluminum alloy

LETTERS ON MATERIALS, 9(4), 556–560.

Layer-by-layer corrosion behavior of 316LN stainless steel with a gradient-nanostructured surface

ELECTROCHEMISTRY COMMUNICATIONS, 110.

Mechanical Properties and Microstructures of Commercial-Purity Aluminum Processed by Rotational Accelerated Shot Peening Plus Cold Rolling

ADVANCED ENGINEERING MATERIALS, 22(1).

Mechanical behavior, deformation mechanism and microstructure evolutions of ultrafine-grained Al during recovery via annealing

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 772.

On the Heterogeneity of Local Shear Strain Induced by High-Pressure Torsion

ADVANCED ENGINEERING MATERIALS, 22(1).

Optimizing the strength, ductility and electrical conductivity of a Cu-Cr-Zr alloy by rotary swaging and aging treatment

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 746, 211–216.

Perspective on hetero-deformation induced (HDI) hardening and back stress

MATERIALS RESEARCH LETTERS, 7(10), 393–398.

Predicting the formation of < c

Predicting the formation of < c. MATERIALIA, 7.

Radiation and Corrosion Resistances of 316LN Austenitic Stainless Steel by Rotationally Accelerated Shot Peening

TMS 2019 148TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, pp. 1251–1260.

Residual stress provides significant strengthening and ductility in gradient structured materials

MATERIALS RESEARCH LETTERS, 7(11), 433–438.

Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures

INTERNATIONAL JOURNAL OF PLASTICITY, 123, 178–195.

Solute segregation assisted nanocrystallization of a cold-rolled Mg-Ag alloy during annealing

SCRIPTA MATERIALIA, 177, 69–73.

A comparison of the twisted and untwisted structures for one-dimensional carbon nanotube assemblies

Materials & Design, 146, 20–27.

A novel approach to align carbon nanotubes via water-assisted shear stretching

COMPOSITES SCIENCE AND TECHNOLOGY, 164, 1–7.

Alleviating surface tensile stress in e-beam treated tool steels by cryogenic treatment

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 722, 167–172.

Catch twin nucleation in action at atomic scale

Science China Materials, 61(7), 1019–1020.

Ductility and plasticity of nanostructured metals: differences and issues

Materials Today Nano, 2, 15–20.

Ductility by shear band delocalization in the nano-layer of gradient structure

MATERIALS RESEARCH LETTERS, 7(1), 12–17.

Effect of strain rate on mechanical properties of Cu/Ni multilayered composites processed by electrodeposition

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 726, 154–159.

Evolution of twinning systems and variants during sequential twinning in cryo-rolled titanium

International Journal of Plasticity, 112, 52–67.

Extraordinary Bauschinger effect in gradient structured copper

SCRIPTA MATERIALIA, 150, 57–60.

Grain refining and mechanical properties of AZ31 alloy processed by accumulated extrusion bonding

JOURNAL OF ALLOYS AND COMPOUNDS, 745, 599–608.

Influence of microstructure on thermal stability of ultrafine-grained Cu processed by equal channel angular pressing

JOURNAL OF MATERIALS SCIENCE, 53(18), 13173–13185.

Interface affected zone for optimal strength and ductility in heterogeneous laminate

Materials Today, 21(7), 713–719.

Ni Nanobuffer Layer Provides Light-Weight CNT/Cu Fibers with Superior Robustness, Conductivity, and Ampacity

ACS APPLIED MATERIALS & INTERFACES, 10(9), 8197–8204.

Origins and dissociation of pyramidal <c + a> dislocations in magnesium and its alloys

ACTA MATERIALIA, 146, 265–272.

Quantifying the synergetic strengthening in gradient material

SCRIPTA MATERIALIA, 150, 22–25.

Review on superior strength and enhanced ductility of metallic nanomaterials

[Review of ]. PROGRESS IN MATERIALS SCIENCE, 94, 462–540.

Structural evolutions of metallic materials processed by severe plastic deformation

[Review of ]. MATERIALS SCIENCE & ENGINEERING R-REPORTS, 133, 1–59.

Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure

JOURNAL OF MATERIALS SCIENCE, 53(14), 10442–10456.

The formation mechanism of a novel interfacial phase with high thermal stability in a Mg-Gd-Y-Ag-Zr alloy

ACTA MATERIALIA, 162, 214–225.

Unique defect evolution during the plastic deformation of a metal matrix composite

SCRIPTA MATERIALIA, 162, 316–320.

A multiscale architectured CuCrZr alloy with high strength, electrical conductivity and thermal stability

Journal of Alloys and Compounds, 735, 1389–1394.

A silicon-impregnated carbon nanotube mat as a lithium-ion cell anode

JOURNAL OF APPLIED ELECTROCHEMISTRY, 48(1), 127–133.

Bauschinger effect and back stress in gradient Cu-Ge alloy

Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 48A(9), 3943–3950.

Effect of grain structure on Charpy impact behavior of copper

SCIENTIFIC REPORTS, 7.

Effect of strain rate on the mechanical properties of a gum metal with various microstructures

ACTA MATERIALIA, 132, 193–208.

Gradient structure produces superior dynamic shear properties

MATERIALS RESEARCH LETTERS, 5(7), 501–507.

Heterogeneous materials: a new class of materials with unprecedented mechanical properties

Materials Research Letters, 5(8), 527–532.

Investigation of microcombing parameters in enhancing the properties of carbon nanotube yarns

MATERIALS & DESIGN, 134, 181–187.

Lattice expansion and grain boundary excess volume of nanocrystalline se prepared by mechanical milling

Reviews on Advanced Materials Science, 48(1), 52–61.

Mechanical properties and microstructure of advanced metallic alloys in honor of Prof. Hael Mughrabi - Part A fracture and fatigue introduction

Journal of Materials Research, 32(23), 4273–4275.

Mechanical properties and microstructure of advanced metallic alloys in honor of Prof. Hael Mughrabi - Part B - high temperature and nanomaterials introduction

Journal of Materials Research, 32(24), 4463–4465.

Microstructural evolution and mechanical properties of a 5052 Al alloy with gradient structures

[Review of ]. Journal of Materials Research, 32(23), 4443–4451.

Microstructure Microstructure and thermal stability of nanocrystalline Mg-Gd-Y-Zr alloy processed by high pressure torsion

JOURNAL OF ALLOYS AND COMPOUNDS, 721, 577–585.

Microstructure evolution and mechanical properties of Al-TiB2/TiC in situ aluminum-based composites during Accumulative Roll Bonding (ARB) process

Materials, 10(2).

On the origin and behavior of irradiation-induced c-component dislocation loops in magnesium

ACTA MATERIALIA, 131, 457–466.

Soldering carbon nanotube fibers by targeted electrothermal-induced carbon deposition

CARBON, 121, 242–247.

The Evolution of Strain Gradient and Anisotropy in Gradient-Structured Metal

Bian, X., Yuan, F., Wu, X., & Zhu, Y. (2017, September). METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 48A, pp. 3951–3960.

Alloying Mg with Gd and Y: Increasing both plasticity and strength

COMPUTATIONAL MATERIALS SCIENCE, 115, 85–91.

Atomic-scale homogenization in an fcc-based high-entropy alloy via severe plastic deformation

JOURNAL OF ALLOYS AND COMPOUNDS, 686, 15–23.

Back stress strengthening and strain hardening in gradient structure

MATERIALS RESEARCH LETTERS, 4(3), 145–151.

Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility

ACTA MATERIALIA, 112, 337–346.

Contribution of van der Waals forces to the plasticity of magnesium

ACTA MATERIALIA, 107, 127–132.

Effect of triple junctions on deformation twinning in a nanostructured Cu-Zn alloy: A statistical study using transmission Kikuchi diffraction

Beilstein Journal of Nanotechnology, 7, 1501–1506.

Enhanced strength and ductility of AZ80 Mg alloys by spray forming and ECAP

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 670, 280–291.

Fabrication of Al/Mg/Al composites via accumulative roll bonding and their mechanical properties

Materials, 9(11).

Gradient Structured Copper by Rotationally Accelerated Shot Peening

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 33(7), 758–761.

Grain size effect on radiation tolerance of nanocrystalline Mo

SCRIPTA MATERIALIA, 123, 90–94.

Investigation and modification of carbon buckypaper as an electrocatalyst support for oxygen reduction

JOURNAL OF APPLIED ELECTROCHEMISTRY, 47(1), 105–115.

Localized deformation via multiple twinning in a Mg-Gd-Y-Zr alloy processed by high-pressure torsion

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 677, 68–75.

Mechanical properties of copper/bronze laminates: Role of interfaces

ACTA MATERIALIA, 116, 43–52.

Microstructural evolution and phase transformation in twinning induced plasticity steel induced by high-pressure torsion

ACTA MATERIALIA, 109, 300–313.

Microstructure and tensile behaviour of pure titanium produced after high-energy shot peening

MATERIALS SCIENCE AND TECHNOLOGY, 32(13), 1323–1329.

Microstructure evolution and strengthening mechanisms of pure titanium with nano-structured surface obtained by high energy shot peening

VACUUM, 125, 215–221.

Nucleation of deformation twins in nanocrystalline fcc alloys

PHILOSOPHICAL MAGAZINE, 96(36), 3790–3802.

Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later

JOM, 68(4), 1216–1226.

Radial growth of multi-walled carbon nanotubes in aligned sheets through cyclic carbon deposition and graphitization

CARBON, 111, 411–418.

Remarkably enhanced thermal transport based on a flexible horizontally-aligned carbon nanotube array film

SCIENTIFIC REPORTS, 6.

Strength and ductility of gradient structured copper obtained by surface mechanical attrition treatment

MATERIALS & DESIGN, 105, 89–95.

Strengthening and toughening effects by strapping carbon nanotube cross-links with polymer molecules

COMPOSITES SCIENCE AND TECHNOLOGY, 135, 123–127.

Synergetic strengthening far beyond rule of mixtures in gradient structured aluminum rod

SCRIPTA MATERIALIA, 122, 106–109.

A model for < c plus a & rang; dislocation transmission across nano-spaced parallel basal stacking faults in a HCP alloy

A model for < c plus a & rang; dislocation transmission across nano-spaced parallel basal stacking faults in a HCP alloy. PHILOSOPHICAL MAGAZINE LETTERS, 95(1), 58–66.

Alloying effect on grain-size dependent deformation twinning in nanocrystalline Cu-Zn alloys

PHILOSOPHICAL MAGAZINE, 95(3), 301–310.