Works (157)

Updated: March 28th, 2024 14:49

2024 journal article

Exploring the stability, thermodynamic and mechanical properties of zirconium oxides and suboxides under temperature and pressure: A first-principles predictions

JOURNAL OF NUCLEAR MATERIALS, 591.

By: H. Zhou, B. Luan, L. Chen, X. Yang, C. Liu, X. Liu, C. Xu, C. Sun, K. Murty

author keywords: First -principles; Pressure; Thermodynamic properties; Mechanical properties
Source: Web Of Science
Added: March 25, 2024

2023 journal article

Microstructures and wear resistance of Zr-4 and N36 alloys subjected to pulsed laser surface remelting

JOURNAL OF NUCLEAR MATERIALS, 577.

By: F. Zhang, L. Chai, L. Qi, Y. Wang, L. Wu, H. Pan, C. Teng, K. Murty*

author keywords: Zr alloys; Laser surface remelting; Hardness; Wear resistance; EBSD
Source: Web Of Science
Added: March 6, 2023

2023 journal article

Strength-ductility synergy through tailoring heterostructures of hot-rolled ferritic-martensitic steels containing varying Si contents

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 886.

By: T. Yang*, L. Chai*, H. Wang, G. Li & K. Murty n

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Ferritic-martensitic steels; Heterogeneous lamella structure; Bi-modal structure; Si content; Hot rolling
Source: Web Of Science
Added: December 11, 2023

2022 journal article

A quasi in-situ study on the work hardening and softening mechanisms of Ti-33Zr-12Al-6V alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 835.

By: F. Zhang, B. Luan, H. Shou, J. Zheng, X. Zhang, R. Liu, K. Murty*

author keywords: Titanium alloy; Quasi in-situ; Uniaxial tension; Strain softening; Schmid factor
Source: Web Of Science
Added: March 14, 2022

2022 article

High Temperature Deformation Behavior of a Fe-25Ni-20Cr (Wt Pct) Austenitic Stainless Steel

Alomari, A. S., Kumar, N., Hawary, M., & Murty, K. L. (2022, June 14). METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 6.

By: A. Alomari n, N. Kumar*, M. Hawary n & K. Murty n

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: July 5, 2022

2022 article

Revealing Microstructural, Textural, and Hardness Evolution of Ti-6Al-4V Sheet Cooled From Sub beta-Transus Temperature at Different Rates

Chai, L., Xia, J., Murty, K. L., Gu, X., Fan, J., & Yao, Z. (2022, June 14). METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE.

By: L. Chai*, J. Xia*, K. Murty n, X. Gu*, J. Fan* & Z. Yao*

co-author countries: Canada 🇨🇦 China 🇨🇳 United States of America 🇺🇸
Source: Web Of Science
Added: July 5, 2022

2021 journal article

A strategy to introduce gradient equiaxed grains into Zr sheet by combining laser surface treatment, rolling and annealing

SCRIPTA MATERIALIA, 196.

By: L. Chai*, Y. Zhu*, X. Hu*, K. Murty n, N. Guo*, L. Chen*, Y. Ma*, L. Zhang*

co-author countries: Australia 🇦🇺 China 🇨🇳 United States of America 🇺🇸
author keywords: Laser surface treatment; Rolling and annealing; Gradient equiaxed grains; High angle boundaries; Strain induced boundary migration
Source: Web Of Science
Added: March 22, 2021

2021 journal article

Effect of Strain Range on High Temperature Creep-Fatigue Behaviour of Fe-25Ni-20Cr (wt.%) Austenitic Stainless Steel (Alloy 709)

MATERIALS AT HIGH TEMPERATURES, 38(1), 47–60.

By: Z. Alsmadi n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Alloy 709; creep-fatigue; strain range; interaction diagram; cracks; dislocations
Sources: Web Of Science, ORCID
Added: January 11, 2021

2021 journal article

Effect of friction stir processing and subsequent annealing on microstructure and mechanical properties of a metastable beta-Zr alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 822.

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Friction stir processing (FSP); Metastable beta-Zr alloy; Tensile properties; Deformation mechanisms
Source: Web Of Science
Added: September 27, 2021

2021 journal article

Effects of composition on phase stabilities and elastic properties in TiZrAlV alloys : Experiments and first-principles calculations

JOURNAL OF ALLOYS AND COMPOUNDS, 863.

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: TiZrAlV alloys; First-principles calculation; Phase stabilities; Elastic properties; Young's modulus; Alloy composition
Source: Web Of Science
Added: March 29, 2021

2021 journal article

High-temperature effects on creep-fatigue interaction of the Alloy 709 austenitic stainless steel

INTERNATIONAL JOURNAL OF FATIGUE, 143.

By: Z. Alsmadi n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Creep-fatigue; Alloy 709; Temperature; Dynamic Strain Aging; Precipitates
Sources: Web Of Science, ORCID
Added: January 4, 2021

2020 journal article

A multi-deformation mechanisms assisted metastable beta-ZrTiAlV alloy exhibits high yield strength and high work hardening rate

JOURNAL OF ALLOYS AND COMPOUNDS, 816.

By: Z. Liao*, B. Luan*, X. Zhang*, R. Liu*, K. Murty n & Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Metastable beta-Zr alloy; Mechanical properties; Deformation-induced martensitic transformation; A10 1 1ATwinning; Kinking band
Source: Web Of Science
Added: January 13, 2020

2020 journal article

Accelerated crack growth experiments of SS304H for dry storage canister in substitute ocean water - Effect of temperature

MATERIALS TODAY COMMUNICATIONS, 23.

By: L. Tjayadi n, N. Kumar* & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: June 22, 2020

2020 journal article

Biaxial Creep Behavior of Nb-Modified Zircaloys

NUCLEAR TECHNOLOGY, 206(5), 706–716.

By: P. Joshi n, M. Tillman n, N. Kumar n, K. Murty n & N. Cinbiz*

co-author countries: United States of America 🇺🇸
author keywords: Zr-Nb alloys; biaxial creep test; anisotropy; crystallite-orientation distribution function; grain-shape anisotropy
Source: Web Of Science
Added: December 9, 2019

2020 journal article

Characterization of stress-rupture behavior of nuclear-grade C26M2 FeCrAl alloy for accident-tolerant fuel cladding via burst testing

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 791.

By: P. Joshi*, B. Kombaiah*, M. Cinbiz & K. Murty*

author keywords: Burst tests; Biaxial loading; Accident-tolerant fuel cladding; Rupture behavior; Power-law creep
Source: Web Of Science
Added: August 10, 2020

2020 journal article

Correlation of microstructural, textural characteristics and hardness of Ti-6Al-4V sheet beta-cooled at different rates

JOURNAL OF MATERIALS SCIENCE, 55(19), 8346–8362.

By: J. Dai*, J. Xia*, L. Chai*, K. Murty n, N. Guo* & M. Daymond*

co-author countries: Canada 🇨🇦 China 🇨🇳 United States of America 🇺🇸
Source: Web Of Science
Added: April 20, 2020

2020 journal article

Effect of hold time on high temperature creep-fatigue behavior of Fe-25Ni-20Cr (wt.%) austenitic stainless steel (Alloy 709)

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 771.

By: Z. Alsmadi n, A. Alomari n, N. Kumar* & K. Murty n

co-author countries: Saudi Arabia 🇸🇦 United States of America 🇺🇸
author keywords: Advanced austenitic stainless steel; Low-cycle fatigue; Creep-fatigue; Hold time; Intergranular; Transgranular
Sources: Web Of Science, ORCID
Added: January 6, 2020

2020 journal article

Effect of varying a phase fraction on the mechanical properties and deformation mechanisms in a metastable beta-ZrTiAlV alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 772.

By: Z. Liao*, B. Luan*, X. Zhang*, R. Liu*, K. Murty n & Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Metastable beta-Zr alloy; alpha phase fraction; Deformation mechanisms; Mechanical properties
Source: Web Of Science
Added: February 17, 2020

2020 journal article

Microstructural characteristics and hardness of CoNiTi medium-entropy alloy coating on pure Ti substrate prepared by pulsed laser cladding

JOURNAL OF ALLOYS AND COMPOUNDS, 849.

By: K. Xiang*, L. Chai*, Y. Wang*, H. Wang, N. Guo*, Y. Ma*, K. Murty n

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Laser surface cladding; Medium entropy alloy; CoNiTi; Phase constitution; Hardness
Source: Web Of Science
Added: October 12, 2020

2020 article

Stress Corrosion Cracking Behavior of Austenitic Stainless Steel SS304 for Dry Storage Canisters in Simulated Sea-Water

TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, pp. 1431–1442.

By: L. Tjayadi n, N. Kumar* & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Crack growth; Fatigue pre-cracking; Fracture mechanics; Hydrogen embrittlement; Intergranular cracking; Potential drop; SCC; Stainless steel
Source: Web Of Science
Added: August 23, 2021

2020 journal article

Twinning behaviors and grain refinement mechanisms during friction stir processing of Zr alloy

MATERIALS CHARACTERIZATION, 163.

By: S. Li*, B. Luan*, L. Chu, X. Zhang*, G. Yuan, R. Liu*, K. Murty n, Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
Source: Web Of Science
Added: August 10, 2020

2019 journal article

Creep Behavior and Microstructural Evolution of a Fe-20Cr-25Ni (Mass Percent) Austenitic Stainless Steel (Alloy 709) at Elevated Temperatures

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A(2), 641–654.

By: A. Alomari n, N. Kumar n & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: January 28, 2019

2019 journal article

Effect of hydriding on the creep behavior of HANA-4 zirconium alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 767.

By: B. Kombaiah n, A. Sarkar n & K. Murty n

co-author countries: India 🇮🇳 United States of America 🇺🇸
author keywords: Creep; Zirconium; Hydrogen; X-Ray diffraction; Mechanical Properties; Process
Source: Web Of Science
Added: November 25, 2019

2019 journal article

Effects of pulsed laser surface treatments on microstructural characteristics and hardness of CrCoNi medium-entropy alloy

PHILOSOPHICAL MAGAZINE, 99(24), 3015–3031.

By: L. Chai*, K. Xiang*, J. Xia*, V. Fallah*, K. Murty n, Z. Yao*, B. Gan*

co-author countries: Canada 🇨🇦 China 🇨🇳 United States of America 🇺🇸
author keywords: CrCoNi MEA; laser surface treatment; annealing twin; hardness; electron backscatter diffraction
Source: Web Of Science
Added: August 19, 2019

2019 journal article

Experimental and theoretical investigation of crystallography and variant selection during massive transformation in Zr alloy

PHILOSOPHICAL MAGAZINE, 99(10), 1163–1183.

By: J. Wang*, B. Luan*, R. Xin*, Q. Xing*, K. Murty n, C. Cayron*, Q. Liu*

co-author countries: Switzerland 🇨🇭 China 🇨🇳 United States of America 🇺🇸
author keywords: Zr-Cr-Fe alloy; massive transformation; variant selection; Burgers orientation relationship
Source: Web Of Science
Added: April 22, 2019

2019 article

Fracture Mechanics-Based Study of Stress Corrosion Cracking of SS304 Dry Storage Canister for Spent Nuclear Fuel

TMS 2019 148TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, pp. 1089–1097.

By: L. Tjayadi n, N. Kumar* & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Crack growth; Fatigue pre-cracking; Fracture mechanics; Potential drop; SCC; Stainless steel
Source: Web Of Science
Added: October 5, 2020

2019 journal article

Misorientation characteristics and textural changes induced by dense twins in high-purity Ti sheet after small strain rolling

SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 62(11), 1968–1975.

By: J. Dai*, L. Zeng, Z. Li, L. Chai*, Z. Zheng*, H. Wu*, K. Murty n, N. Guo*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: titanium sheet; cold rolling; misorientation; twinning; texture
Source: Web Of Science
Added: November 11, 2019

2019 journal article

Serrated yielding in an advanced stainless steel Fe-25Ni-20Cr (wt%)

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 751, 292–302.

By: A. Alomari n, N. Kumar n & K. Murty n

co-author countries: Saudi Arabia 🇸🇦 United States of America 🇺🇸
author keywords: Serrated flow; Dynamic strain aging; High temperature deformation; Austenitic steels
Source: Web Of Science
Added: April 15, 2019

2019 journal article

Study of deformation mechanisms in a metastable beta Zr alloy during compression

MATERIALS LETTERS, 237, 172–175.

By: Z. Liao*, B. Luan*, X. Zhang*, Q. Xing*, R. Liu*, K. Murty n, Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Deformation mechanisms; Metastable beta-Zr alloy; Deformation-induced martensitic; transformation; Twinning
Source: Web Of Science
Added: January 14, 2019

2019 journal article

The effects of increasing deformation strain on the microstructural evolution of a metastable beta-Zr alloy

JOURNAL OF ALLOYS AND COMPOUNDS, 800, 208–218.

By: Z. Liao*, B. Luan*, X. Zhang*, R. Liu*, K. Murty n & Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Metastable beta-Zr alloy; Plastic deformation; Microstructure; Martensite phase transformation; Twinning; Hardness
Source: Web Of Science
Added: July 15, 2019

2018 journal article

Anisotropic grain growth kinetics in nanocrystalline nickel

PHILOSOPHICAL MAGAZINE LETTERS, 98(11), 494–501.

By: A. Sarkar n & K. Murty n

co-author countries: India 🇮🇳 United States of America 🇺🇸
author keywords: Nanocrystalline nickel; grain growth; X-ray diffraction
Source: Web Of Science
Added: April 9, 2019

2018 journal article

Effect of initial orientation on dynamic recrystallization of a zirconium alloy during hot deformation

MATERIALS CHARACTERIZATION, 145, 444–453.

By: Q. Zeng*, B. Luan*, Y. Wang*, X. Zhang*, R. Liu*, K. Murty n, Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Zirconium alloy; Hot deformation; Dynamic recrystallization; EBSD
Source: Web Of Science
Added: November 26, 2018

2018 journal article

Enhanced ductility in dynamic strain aging regime in a Fe-25Ni-20Cr austenitic stainless steel

Materials Science and Engineering: A, 729, 157–160.

By: A. Alomari n, N. Kumar n & K. Murty n

co-author countries: Saudi Arabia 🇸🇦 United States of America 🇺🇸
author keywords: Ductility; Austenitic steels; Dynamic strain aging; High temperature deformation
Source: Crossref
Added: February 24, 2020

2018 journal article

Formability of a wrought Mg alloy evaluated by impression testing

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 712, 140–145.

By: W. Mohamed*, S. Gollapudi*, I. Charit* & K. Murty n

co-author countries: India 🇮🇳 United States of America 🇺🇸
author keywords: Mg alloy; Formability; Impression testing; Twinning
Source: Web Of Science
Added: August 6, 2018

2018 journal article

Nanotwins induced by pulsed laser and their hardening effect in a Zr alloy

JOURNAL OF ALLOYS AND COMPOUNDS, 748, 163–170.

By: L. Chai*, K. Chen*, Y. Zhi*, K. Murty n, L. Chen* & Z. Yang*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Zr alloy; Pulsed laser; Nanotwins; Hardening; Electron backscatter diffraction
Source: Web Of Science
Added: August 6, 2018

2018 chapter

Understanding Creep-Fatigue Interaction in Fe-25Ni-20Cr (wt%) Austenitic Stainless Steel

In Challenges in Mechanics of Time-Dependent Materials, Volume 2 (pp. 33–38).

By: N. Kumar n, A. Alomari n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Austenitic stainless steel; Gen-IV nuclear reactor; Mechanical properties; Creep-fatigue; Plastic deformation
Source: Crossref
Added: June 6, 2020

2018 journal article

Understanding thermally activated plastic deformation behavior of Zircaloy-4

JOURNAL OF NUCLEAR MATERIALS, 504, 41–49.

By: N. Kumar n, A. Alomari n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Plastic deformation; Micromechanics; Tensile testing; Stress relaxation; Activation volume; Zircaloy-4
Source: Web Of Science
Added: August 6, 2018

2017 chapter

Anisotropic Biaxial Creep of Textured Nb-Modified Zircaloy-4 Tubing

In Mechanical and Creep Behavior of Advanced Materials (pp. 19–32).

By: N. Kumar n, K. Grundy n, B. Kombaiah*, B. Luan* & K. Murty n

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Biaxial creep; Zirconium alloy; Cladding material; Anisotropy
Source: Crossref
Added: February 24, 2020

2017 chapter

Creep, Deformation and Fracture Studies of Materials for Various Technologies in the Nuclear Materials Research Group at NC State

In Mechanical and Creep Behavior of Advanced Materials (pp. 3–18).

By: K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Creep; Fracture; Strain aging; Diffusion; NMR
Source: Crossref
Added: June 6, 2020

2017 article

Dislocation Cross-Slip Controlled Creep at High Stresses and Transitional Creep Mechanisms in Zircaloy-4

MECHANICAL AND CREEP BEHAVIOR OF ADVANCED MATERIALS, pp. 65–77.

By: B. Kombaiah* & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Creep; Cross slip; Climb; Diffusion; Fuel cladding
Source: Web Of Science
Added: August 6, 2018

2017 chapter

Effect of Mo and Bi Additions on the Microstructure of Zr–Cr–Fe Alloy After β-Quenching

In Mechanical and Creep Behavior of Advanced Materials (pp. 183–192).

By: J. Wang*, B. Luan*, K. Murty n & Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Martensitic transformation; Massive transformation; Zr-Cr-Fe alloy; Mo and bi
Source: Crossref
Added: June 6, 2020

2017 journal article

Evolution of microstructure and second-phase particles in Zr-Sn-Nb-Fe alloy tube during Pilger processing

JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 54(12), 1321–1329.

By: R. Qiu*, Z. Song*, B. Luan*, Q. Yue, L. Wang, G. Yuan, K. Murty n, Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Zirconium alloy; microstructure; second-phase particles; pilger processing
Source: Web Of Science
Added: August 6, 2018

2017 chapter

Fracture Behavior and Grain Boundary Sliding During High-Temperature Low-Stress Deformation of AZ31 Magnesium Alloy

In Mechanical and Creep Behavior of Advanced Materials (pp. 279–287).

By: P. Roodposhti* & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: AZ31; Creep; GBS; Fracture analysis; Monkman-Grant
Source: Crossref
Added: February 24, 2020

2017 chapter

Synergistic Effects of Neutron Irradiation and Interstitial Nitrogen on Strain Aging in Ferritic Steels

In Mechanical and Creep Behavior of Advanced Materials (pp. 151–164).

co-author countries: Jordan 🇯🇴 Korea (Republic of) 🇰🇷 United States of America 🇺🇸
author keywords: Neutron irradiation; Dynamic strain aging; Pressure vessel; Ferritic steels; Mild steel
Source: Crossref
Added: February 24, 2020

2017 journal article

Understanding effect of 3.5 wt.% NaCl on the corrosion of Al0.1CoCrFeNi high-entropy alloy

Journal of Nuclear Materials, 495, 154–163.

By: N. Kumar n, M. Fusco n, M. Komarasamy*, R. Mishra*, M. Bourham n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Metals and alloys; Electrochemical impedance spectroscopy; Corrosion; Nuclear reactor materials
Sources: Web Of Science, ORCID, Crossref
Added: August 6, 2018

2017 conference paper

Understanding plastic deformation mechanism(s) in recrystallized Zircaloy-4

Proceedings of the ASME 12th International Manufacturing Science and Engineering Conference - 2017, vol 2.

By: N. Kumar n, A. Alomari n & K. Murty n

co-author countries: United States of America 🇺🇸
Source: NC State University Libraries
Added: August 6, 2018

2017 journal article

alpha ->beta Transformation characteristics revealed by pulsed laser-induced non-equilibrium microstructures in duplex-phase Zr alloy

SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 60(8), 1255–1262.

By: L. Chai*, S. Wang*, H. Wu*, N. Guo*, H. Pan*, L. Chen*, K. Murty n, B. Song*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Zr alloy; microstructure; phase transformation; laser treatment; electron backscatter diffraction
Source: Web Of Science
Added: August 6, 2018

2016 journal article

Effects of Microstructure and Processing Methods on Creep Behavior of AZ91 Magnesium Alloy

Journal of Materials Engineering and Performance, 25(9), 3697–3709.

By: P. Shahbeigi Roodposhti n, A. Sarkar n, K. Murty n & R. Scattergood n

co-author countries: United States of America 🇺🇸
author keywords: AZ91; creep; die cast; intermetallic phases; mild steel cast; thixoform
Source: Crossref
Added: February 24, 2020

2016 journal article

Grain boundary sliding mechanism during high temperature deformation of AZ31 Magnesium alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 669, 171–177.

By: P. Roodposhti n, A. Sarkar n, K. Murty n, H. Brody* & R. Scattergood n

co-author countries: United States of America 🇺🇸
author keywords: AZ31; Creep; Grain boundary sliding; Cavity formation
Source: Web Of Science
Added: August 6, 2018

2016 journal article

Microstructural, textural and hardness evolution of commercially pure Zr surface-treated by high current pulsed electron beam

APPLIED SURFACE SCIENCE, 390, 430–434.

By: L. Chai*, B. Chen*, S. Wang*, Z. Zhang* & K. Murty n

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Zr; Microstructure; Texture; Hardness; Electron beam methods
Source: Web Of Science
Added: August 6, 2018

2016 journal article

Modeling irradiation creep of graphite using rate theory

JOURNAL OF NUCLEAR MATERIALS, 473, 197–205.

By: A. Sarkar n, J. Eapen n, A. Raj n, K. Murty n & T. Burchell*

co-author countries: United States of America 🇺🇸
author keywords: Graphite; Creep; Irradiation; Activation energy
Source: Web Of Science
Added: August 6, 2018

2016 journal article

The Role of Grain Size on Neutron Irradiation Response of Nanocrystalline Copper

MATERIALS, 9(3).

By: W. Mohamed n, B. Miller*, D. Porter* & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: copper; nanocrystalline; neutron irradiation; grain growth; radiation hardening; thermal stability
Source: Web Of Science
Added: August 6, 2018

2016 journal article

{112̅1}-{101̅2} double twinning in a Zircaloy-4 alloy during rolling at ambient temperature

Scripta Materialia, 122, 77–81.

By: M. Zhang*, B. Luan*, Z. Song*, R. Xin*, K. Murty n & Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Zircaloy-4; Double twinning; Electron backscattering diffraction (EBSD); Schmid factor; Local strain accommodation
Source: Crossref
Added: December 31, 2020

2015 journal article

A special twin relationship or a common Burgers misorientation between alpha plates after beta quenching in Zr alloy?

MATERIALS CHARACTERIZATION, 104, 61–65.

By: L. Chai*, B. Chen*, Z. Zhou*, K. Murty n, Y. Ma* & W. Huang*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Zr alloy; Quenching; Misorientation; Electron backscatter diffraction
Source: Web Of Science
Added: August 6, 2018

2015 journal article

Coble, Orowan Strengthening, and Dislocation Climb Mechanisms in a Nb-Modified Zircaloy Cladding

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A(10), 4646–4660.

By: B. Kombaiah n & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2015 journal article

Dislocation Density Evolution During Creep of AZ31 Mg Alloy: A Study by X-ray Diffraction Line Profile Analysis

Metallography, Microstructure, and Analysis, 4(5), 337–343.

By: P. Roodposhti n, A. Sarkar n, K. Murty n & R. Scattergood n

co-author countries: United States of America 🇺🇸
author keywords: AZ31; Dislocation density; Creep; Williamson-Hall plot; DRX; DRV
Source: Crossref
Added: February 24, 2020

2015 journal article

Dislocation cross-slip controlled creep in Zircaloy-4 at high stresses

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 623, 114–123.

By: B. Kombaiah n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Creep; Zircaloy; Cross slip; Electron microscopy
Source: Web Of Science
Added: August 6, 2018

2015 journal article

Fracture Behavior of AZ31 Magnesium Alloy During Low-Stress High-Temperature Deformation

Metallography, Microstructure, and Analysis, 4(2), 91–101.

By: P. Roodposhti n, A. Sarkar n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: AZ31; Creep; Inter-granular fracture; Dislocation density; Cavity formation
Source: Crossref
Added: February 24, 2020

2015 journal article

High temperature creep and deformation microstructures in recrystallized Zircaloy-4

PHILOSOPHICAL MAGAZINE, 95(15), 1656–1679.

By: B. Kombaiah n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: deformation mechanisms; dislocation climb; electron microscopy; Coble creep; Zircaloy-4; creep
Source: Web Of Science
Added: August 6, 2018

2015 journal article

Investigation of Portevin - Le Chatelier effect in HT-9 steel

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 631, 120–125.

By: A. Sarkar n, S. Maloy* & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Portevin - Le Chatelier effect; Dynamic strain aging; HT-9 steel; Tensile tests
Source: Web Of Science
Added: August 6, 2018

2015 journal article

Microstructural and textural evolution of commercially pure Zr sheet rolled at room and liquid nitrogen temperatures

MATERIALS & DESIGN, 85, 296–308.

By: L. Chai*, B. Luan*, D. Xiao*, M. Zhang*, K. Murty n & Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Zr; Microstructure; Texture; Deformation mode; Rolling
Source: Web Of Science
Added: August 6, 2018

2015 journal article

Microstructural approach to equal channel angular processing of commercially pure titanium—A review

Transactions of Nonferrous Metals Society of China, 25(5), 1353–1366.

By: P. Roodposhti n, N. Farahbakhsh n, A. Sarkar n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: equal channel angular pressing (ECAP); commercially pure titanium (CP-Ti); backpressure; channel angle; curvature angle; pressing speed
Source: Crossref
Added: August 28, 2020

2015 journal article

Microstructural development of high temperature deformed AZ31 magnesium alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 626, 195–202.

By: P. Roodposhti n, A. Sarkar n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Creep; AZ31 Mg alloy; Dynamic recrystallization; Dynamic recovery; Dislocation density
Source: Web Of Science
Added: August 6, 2018

2015 journal article

Microstructure-mechanical property correlation of cryo rolled Zircaloy-4

JOURNAL OF NUCLEAR MATERIALS, 456, 287–291.

By: A. Sarkar n & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2014 conference paper

Characterization of hot deformation behavior of Zr-1.0Sn-0.3Nb-0.3Fe-0.1Cr using processing map

Proceedings of the 21st International Conference on Nuclear Engineering - 2013, vol 1.

By: B. Luan n, R. Qiu*, Z. Zhou*, K. Murty n, J. Zhou* & Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
Source: NC State University Libraries
Added: August 6, 2018

2014 journal article

Creep Behavior of Hydrogenated Zirconium Alloys

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 23(10), 3649–3656.

By: A. Sarkar n, K. Boopathy n, J. Eapen n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: creep; hydride; hydrogen; zirconium alloy
Source: Web Of Science
Added: August 6, 2018

2014 journal article

Creep deformation behavior of Sn-Zn solder alloys

JOURNAL OF MATERIALS SCIENCE, 49(5), 2127–2135.

By: T. Shrestha*, S. Gollapudi n, I. Charit* & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2014 chapter

Effect of Low Dose Neutron Irradiation on Tensile Behavior of HT-9 Steel at Room Temperature

In TMS 2014: 143rd Annual Meeting & Exhibition (pp. 147–154).

By: A. Sarkar n, A. Alsabbagh n & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Crossref
Added: February 24, 2020

2014 conference paper

Effect of Mo and Bi on mechanical properties of Zr-Fe-Cr alloy at room ternperature

Proceedings of the 21st International Conference on Nuclear Engineering - 2013, vol 1.

By: B. Luan n, L. Yang*, T. Wei, K. Murty n, C. Long & Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
Source: NC State University Libraries
Added: August 6, 2018

2014 journal article

Investigation of microstructure and mechanical properties of low dose neutron irradiated HT-9 steel

ANNALS OF NUCLEAR ENERGY, 65, 91–96.

By: A. Sarkar n, A. Alsabbagh n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Neutron irradiation; X-ray diffraction; Tensile test
Source: Web Of Science
Added: August 6, 2018

2014 journal article

Loading Rate-Dependent Mechanical Properties of Bulk Two-Phase Nanocrystalline Al-Pb Alloys Studied by Nanoindentation

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A(11), 5249–5258.

By: S. Varam*, K. Rajulapati*, K. Rao*, R. Scattergood n, K. Murty n & C. Koch n

co-author countries: India 🇮🇳 United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2014 journal article

Microstructure and mechanical behavior of neutron irradiated ultrafine grained ferritic steel

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 615, 128–138.

By: A. Alsabbagh n, A. Sarkar n, B. Miller*, J. Burns*, L. Squires*, D. Porter*, J. Cole*, K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Neutron irradiation effects; Ultrafine-grained materials; Low carbon steel; Precipitate strengthening; Dislocation forest hardening
Source: Web Of Science
Added: August 6, 2018

2013 article

Burst and Biaxial Creep of Thin-Walled Tubing of Low c/a-Ratio HCP Metals

6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION, Vol. 55, pp. 443–450.

By: K. Murty n, C. Seok* & B. Kombaiah n

co-author countries: Korea (Republic of) 🇰🇷 United States of America 🇺🇸
author keywords: Zircaloys; titanium; burst; biaxial creep; microstructure
Source: Web Of Science
Added: August 6, 2018

2013 journal article

Early Damage Mechanisms in Nuclear Grade Graphite under Irradiation

Materials Research Letters, 2(1), 43–50.

co-author countries: United States of America 🇺🇸
author keywords: Graphite; Irradiation; Topological Defects; Dislocations; Amorphization
Source: Crossref
Added: August 28, 2020

2013 journal article

Effect of predeformation on microstructural evolution of a Zr alloy during 550-700 degrees C aging after beta quenching

ACTA MATERIALIA, 61(8), 3099–3109.

By: L. Chai n, B. Luan n, K. Murty n & Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Zr alloy; Predeformation; Aging; Recrystallization; Microstructure
Source: Web Of Science
Added: August 6, 2018

2013 journal article

Experimental observation of 12 alpha variants inherited from one beta grain in a Zr alloy

JOURNAL OF NUCLEAR MATERIALS, 440(1-3), 377–381.

By: L. Chai n, B. Luan n, M. Zhang*, K. Murty n & Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2013 journal article

Influence of grain size on radiation effects in a low carbon steel

JOURNAL OF NUCLEAR MATERIALS, 443(1-3), 302–310.

By: A. Alsabbagh n, R. Valiev* & K. Murty n

co-author countries: Russian Federation 🇷🇺 United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2013 journal article

Twinning during recrystallization cooling in alpha-Zr alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 576, 320–325.

By: L. Chai n, B. Luan n, K. Murty n & Q. Liu*

co-author countries: China 🇨🇳 United States of America 🇺🇸
author keywords: Twinning; Zr alloy; Residual stresses; Texture; Recrystallization
Source: Web Of Science
Added: August 6, 2018

2011 article

High temperature deformation characteristics of Zirlo (TM) tubing via ring-creep and burst tests

Seok, C. S., Marple, B., Song, Y. J., Gollapudi, S., Charit, I., & Murty, K. L. (2011, March). NUCLEAR ENGINEERING AND DESIGN, Vol. 241, pp. 599–602.

By: C. Seok, B. Marple*, Y. Song*, S. Gollapudi*, I. Charit & K. Murty*

Source: Web Of Science
Added: August 6, 2018

2011 journal article

Temperature Dependence of the Dynamics of Portevin-Le Chatelier Effect in Al-2.5 Pct Mg Alloy

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 42A(5), 1184–1190.

By: A. Chatterjee*, K. Murty n, N. Gayathri*, P. Mukherjee* & P. Barat*

co-author countries: India 🇮🇳 United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2010 journal article

Creep behavior of ultra-fine grained Zn-4.5Al

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(27-28), 7382–7386.

By: J. Gobien n, K. Murty n, R. Scattergood n, F. Goodwin & C. Koch n

co-author countries: United States of America 🇺🇸
author keywords: Zinc; Coble creep; Impression creep; Threshold stress
Source: Web Of Science
Added: August 6, 2018

2010 journal article

Creep in nanocrystalline materials: Role of stress assisted grain growth

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(21-22), 5773–5781.

co-author countries: India 🇮🇳 United States of America 🇺🇸
author keywords: Grain growth; Grain boundaries; Nanostructured alloys; Aluminum alloys; Mechanical alloying
Source: Web Of Science
Added: August 6, 2018

2010 journal article

Irradiation Induced Creep of Graphite

JOM, 62(9), 93–99.

By: T. Burchell*, K. Murty n & J. Eapen n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2010 journal article

Materials for next-generation nuclear plants: Objectives and challenges

JOM: the Journal of the Minerals, Metals & Materials Society, 62(9), 60–61.

By: K. Murty n

co-author countries: United States of America 🇺🇸
Source: NC State University Libraries
Added: August 6, 2018

2010 journal article

Newtonian viscous creep in metals

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 63(2-3), 85–91.

By: K. Murty n, S. Gollapudi n & I. Charit*

co-author countries: United States of America 🇺🇸
author keywords: Newtonian viscous creep; Nabarro-Herring; Coble; Harper-Dorn; diffusion
Source: Web Of Science
Added: August 6, 2018

2010 journal article

Structural materials issues for the next generation fission reactors

JOM, 62(9), 67–74.

By: I. Chant* & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Crossref
Added: August 28, 2020

2010 journal article

Understanding creep in nanocrystalline materials

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 63(2-3), 373–378.

co-author countries: United States of America 🇺🇸
author keywords: nanocrystalline materials; coble creep; grain growth; impression creep
Source: Web Of Science
Added: August 6, 2018

2008 journal article

Creep behavior of niobium-modified zirconium alloys

JOURNAL OF NUCLEAR MATERIALS, 374(3), 354–363.

By: I. Charit n & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2008 journal article

Creep mechanisms in TI-3Al-2.5V alloy tubing deformed under closed-end internal gas pressurization

ACTA MATERIALIA, 56(10), 2406–2419.

By: S. Gollapudi n, I. Charit n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: titanium alloys; creep; diffusion; transmission electron microscopy; slip band
Source: Web Of Science
Added: August 6, 2018

2008 journal article

Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 39A(10), 2528–2534.

By: K. Rajulapati n, R. Scattergood n, K. Murty n, Z. Horita*, T. Langdon* & C. Koch n

co-author countries: Japan 🇯🇵 United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2008 journal article

Newtonian viscous creep in Ti-3Al-2.5V

PHILOSOPHICAL MAGAZINE, 88(9), 1357–1367.

By: S. Gollapudi, V. Bhosle*, I. Charit n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: titanium alloys; creep; diffusion; transmission electron; microscopy; HRTEM; Coble; slip band; Spingarn-Nix model
Source: Web Of Science
Added: August 6, 2018

2008 article

Static strain aging and dislocation-impurity interactions in irradiated mild steel

Murty, K. L., & Charit, I. (2008, December 1). JOURNAL OF NUCLEAR MATERIALS, Vol. 382, pp. 217–222.

By: K. Murty n & I. Charit*

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2008 article

Strengthening mechanisms in nanocrystalline alloys

Scattergood, R. O., Koch, C. C., Murty, K. L., & Brenner, D. (2008, October 15). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 493, pp. 3–11.

By: R. Scattergood n, C. Koch n, K. Murty n & D. Brenner n

co-author countries: United States of America 🇺🇸
author keywords: nanocrystalline alloys; strengthening mechanisms; Orowan model
Source: Web Of Science
Added: August 6, 2018

2008 conference paper

Stress rupture characteristics of zirconium alloy cladding under closed-end internal pressurization

Proceedings of 16th International Conference on Nuclear Engineering-Volume 1, 385–388.

By: B. Marple n, Y. Song n, S. Gollapudi n, K. Murty n & I. Charit*

co-author countries: United States of America 🇺🇸
Source: NC State University Libraries
Added: August 6, 2018

2008 article

Structural materials for Gen-IV nuclear reactors: Challenges and opportunities

Murty, K. L., & Charit, I. (2008, December 15). JOURNAL OF NUCLEAR MATERIALS, Vol. 383, pp. 189–195.

By: K. Murty n & I. Charit*

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2007 article

Characterization of stress rupture behavior of cornmercial-purity-Ti via burst testing

Srikant, G., Marple, B., Charit, I., & Murty, K. L. (2007, August 15). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 463, pp. 203–207.

By: G. Srikant n, B. Marple n, I. Charit n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: cp-titanium; burst testing; power-law creep; power-law breakdown
Source: Web Of Science
Added: August 6, 2018

2007 journal article

Determination of Activation Volume in Nanocrystalline Cu Using the Shear Punch Test

Advanced Engineering Materials, 9(10), 855–859.

By: R. Guduru*, P. Wong n, K. Darling n, C. Koch n, K. Murty n & R. Scattergood n

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, Crossref
Added: August 6, 2018

2007 journal article

Mechanical behavior of nanocrystalline copper

Materials Science and Engineering: A, 463(1-2), 14–21.

By: R. Guduru n, K. Murty n, K. Youssef n, R. Scattergood n & C. Koch n

co-author countries: United States of America 🇺🇸
author keywords: nanocrystalline materials; copper; mechanical behavior; strain rate sensitivity; ductility; activation volume
Source: Crossref
Added: February 24, 2020

2007 journal article

Mechanical properties of electrodeposited nanocrystalline copper using tensile and shear punch tests

JOURNAL OF MATERIALS SCIENCE, 42(14), 5581–5588.

By: R. Guduru n, K. Darling n, R. Scattergood n, C. Koch n & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2007 article

Proceedings of the Symposium on Radiation Effects, Deformation and Phase Transformations in Metals and Ceramics, Organized in Honor of Prof. Monroe S. Wechsler - TMS Annual Meeting, San Antonio, Texas, USA 12-16 March 2006 - Preface

Murty, K. L., Mansur, L. K., Simonen, E. P., & Bajaj, R. (2007, April 15). JOURNAL OF NUCLEAR MATERIALS, Vol. 361, pp. VII-IX.

By: K. Murty n, L. Mansur*, E. Simonen* & R. Bajaj*

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2007 article

Synergistic effects of interstitial impurities and radiation defects on mechanical characteristics of ferritic steels

Charit, I., Seok, C. S., & Murty, K. L. (2007, April 15). JOURNAL OF NUCLEAR MATERIALS, Vol. 361, pp. 262–273.

By: I. Charit n, C. Seok* & K. Murty n

co-author countries: Korea (Republic of) 🇰🇷 United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2007 journal article

The mechanical behavior of multiphase nanocrystalline materials

JOM, 59(3), 66–70.

By: C. Koch n, R. Scattergood n & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2007 journal article

Thickness and clearance effects in shear punch testing

ADVANCED ENGINEERING MATERIALS, 9(3), 157–160.

By: R. Guduru n, A. Nagasekhar*, R. Scattergood n, C. Koch n & K. Murty n

co-author countries: Singapore 🇸🇬 United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2007 journal article

WITHDRAWN: Structural materials for Gen-IV nuclear reactors: Challenges and opportunities

Journal of Nuclear Materials.

By: K. Murty n & I. Charit n

co-author countries: United States of America 🇺🇸
Source: Crossref
Added: August 28, 2020

2006 journal article

Effect of Pb on the mechanical properties of nanocrystalline Al

SCRIPTA MATERIALIA, 55(2), 155–158.

co-author countries: United States of America 🇺🇸
author keywords: nanocrystalline materials; ball milling; second phase; Al-Pb; microhardness
Source: Web Of Science
Added: August 6, 2018

2006 journal article

Finite element analysis of a shear punch test

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 37A(5), 1477–1483.

By: R. Guduru n, A. Nagasekhar*, R. Scattergood n, C. Koch n & K. Murty n

co-author countries: Singapore 🇸🇬 United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2006 journal article

Mechanical properties of nanocrystalline Fe-Pb and Fe-Al2O3

SCRIPTA MATERIALIA, 54(11), 1879–1883.

By: R. Guduru n, R. Scattergood n, C. Koch n, K. Murty n, S. Guruswamy* & M. McCarter*

co-author countries: United States of America 🇺🇸
author keywords: nanocrystalline materials; iron; composites; mechanical properties
Source: Web Of Science
Added: August 6, 2018

2006 journal article

Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility

SCRIPTA MATERIALIA, 54(2), 251–256.

By: K. Youssef n, R. Scattergood n, K. Murty n & C. Koch n

co-author countries: United States of America 🇺🇸
author keywords: nanocrystalline materials; aluminum alloys; mechanical properties
Source: Web Of Science
Added: August 6, 2018

2006 journal article

Shear punch tests for a bulk metallic glass

INTERMETALLICS, 14(12), 1411–1416.

By: R. Guduru n, K. Darling n, R. Scattergood n, C. Koch n, K. Murty n, M. Bakkal*, A. Shih*

co-author countries: Türkiye 🇹🇷 United States of America 🇺🇸
author keywords: glasses metallic; mechanical properties at ambient temperature; fracture stress; mechanical properties, theory; mechanical testing
Source: Web Of Science
Added: August 6, 2018

2006 review

Texture development and anisotropic deformation of zircaloys

[Review of ]. PROGRESS IN NUCLEAR ENERGY, 48(4), 325–359.

By: K. Murty n & I. Charit n

co-author countries: United States of America 🇺🇸
author keywords: zircaloys; texture; mechanical anisotropy; formability; plasticity; twinning; CODF
Source: Web Of Science
Added: August 6, 2018

2006 article

The properties of the ring and burst creep of ZIRLO cladding

Seok, C. S., Bae, B. K., Koo, J. M., & Murty, K. L. (2006, April). ENGINEERING FAILURE ANALYSIS, Vol. 13, pp. 389–397.

By: C. Seok*, B. Bae*, J. Koo* & K. Murty n

co-author countries: Korea (Republic of) 🇰🇷 United States of America 🇺🇸
author keywords: mechanical testing; creep; burst testing; cladding; Larson-Miller parameter
Source: Web Of Science
Added: August 6, 2018

2005 journal article

Ball indentation tests for a Zr-based bulk metallic glass

SCRIPTA MATERIALIA, 53(12), 1461–1465.

By: G. Trichy n, R. Scattergood n, C. Koch n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: ball indentation tests; bulk metallic glass; pressure sensitivity; strain rate sensitivity
Source: Web Of Science
Added: August 6, 2018

2005 journal article

Breakthroughs in Optimization of Mechanical Properties of Nanostructured Metals and Alloys

Advanced Engineering Materials, 7(9), 787–794.

By: C. Koch n, K. Youssef n, R. Scattergood n & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Crossref
Added: February 24, 2020

2005 journal article

Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys

Advanced Engineering Materials, 7(9), 787–794.

By: C. Koch, K. Youssef, R. Scattergood & K. Murty

Source: NC State University Libraries
Added: August 6, 2018

2005 journal article

Creep deformation characteristics of tin and tin-based electronic solder alloys

Metallurgical and Materials Transactions A, 36(1), 99–105.

By: M. Mathew*, H. Yang, S. Movva* & K. Murty n

co-author countries: United Kingdom of Great Britain and Northern Ireland 🇬🇧 India 🇮🇳 United States of America 🇺🇸
Source: Crossref
Added: August 28, 2020

2005 chapter

Effect of annealing temperature on texture and creep anisotropy in Ti3Al2.5V alloy

In Textures of materials: ICOTOM 14: Proceedings of the 14th International Conference on Textures of Materials, held in Leuven, Belgium, July 11-15, 2005 / Paul van Houtte; Leo Kestens. Uetikon-Zuerich, Switzerland ; Enfield, NH: Trans Tech Publications, 2005. (Materials science forum ; 495-497) (Vol. 495-497, pp. 1645–1650).

By: K. Murty n, R. Kishore, J. Yan*, R. Scattergood n & A. Helsel*

co-author countries: United States of America 🇺🇸
Source: NC State University Libraries
Added: August 6, 2018

2005 article

Effect of temperature on transitions in creep mechanisms in class-A alloys

Murty, K. L., Dentel, G., & Britt, J. (2005, November 25). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 410, pp. 28–31.

By: K. Murty n, G. Dentel n & J. Britt n

co-author countries: United States of America 🇺🇸
author keywords: creep; transitions; climb; glide; zirconium; diffusion
Source: Web Of Science
Added: August 6, 2018

2005 journal article

Evaluation of mechanical properties using shear–punch testing

Materials Science and Engineering: A, 395(1-2), 307–314.

By: R. Guduru n, K. Darling n, R. Kishore, R. Scattergood n, C. Koch n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: shear-punch test; mechanical properties; yield strengths specimen thickness; die-punch clearance
Source: Crossref
Added: August 28, 2020

2005 journal article

Ultrahigh strength and high ductility of bulk nanocrystalline copper

APPLIED PHYSICS LETTERS, 87(9).

By: K. Youssef n, R. Scattergood n, K. Murty n, J. Horton* & C. Koch n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2004 article

Nondestructive monitoring of structural materials using automated ball indentation (ABI) technique

Murty, K. L., & Mathew, M. D. (2004, March). NUCLEAR ENGINEERING AND DESIGN, Vol. 228, pp. 81–96.

By: K. Murty n & M. Mathew*

co-author countries: India 🇮🇳 United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2004 journal article

Short-term rupture studies of Zircaloy-4 and Nb-modified Zircaloy-4 tubing using closed-end internal pressurization

Nuclear Engineering and Design, 228(1-3), 3–13.

By: Y. Zhou n, B. Devarajan n & K. Murty n

co-author countries: United States of America 🇺🇸
Sources: Crossref, NC State University Libraries
Added: August 6, 2018

2004 journal article

Ultratough nanocrystalline copper with a narrow grain size distribution

APPLIED PHYSICS LETTERS, 85(6), 929–931.

By: K. Youssef n, R. Scattergood n, K. Murty n & C. Koch n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2002 journal article

Plastic instability and mechanical anisotropy of textured zinc

Journal of Testing and Evaluation, 30(3), 197–207.

By: G. Rao, P. Godavarti, S. Mahmood & K. Murty

Source: NC State University Libraries
Added: August 6, 2018

2001 journal article

Fracture in ferritic reactor steel - Dynamic strain aging and cyclic loading

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 53(7), 23–26.

By: K. Murty n & C. Seok

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2001 journal article

LWR pellet-cladding interactions: Materials solutions to SCC

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 53(7), 9–13.

By: K. Edsinger* & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2001 journal article

Materials issues in light water reactors

JOM: the Journal of the Minerals, Metals & Materials Society, 53(7), 88.

By: K. Murty

Source: NC State University Libraries
Added: August 6, 2018

2000 journal article

Deformation mechanisms and transients in creep of zircaloys: Applications to nuclear technology

Transactions of the Indian Institute of Metals, 53(3), 107–120.

By: K. Murty

Source: NC State University Libraries
Added: August 6, 2018

2000 article

Deformation mechanisms in tin and tin-based electronic solder alloys

CREEP AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES, Vol. 171-1, pp. 655–662.

By: M. Mathew*, S. Movva & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2000 journal article

High temperature deformation characteristics of tin-based solder alloys: Application to electronic packaging

Transactions of the Indian Institute of Metals, 53(3), 369–379.

By: M. Mathew, H. Yang, S. Movva & K. Murty

Source: NC State University Libraries
Added: August 6, 2018

2000 journal article

Materials issues in nuclear-waste management

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 52(9), 26–29.

By: M. Yim n & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

2000 journal article

The internal pressurization creep of Zr alloys for spent-fuel dry storage feasibility

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 52(9), 34–38.

By: K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

1999 journal article

Ball indentation studies on the effect of aging on mechanical behavior of alloy 625

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 264(1-2), 159–166.

By: M. Mathew n, K. Murty n, K. Rao* & S. Mannan*

co-author countries: India 🇮🇳 United States of America 🇺🇸
author keywords: ball indentation studies; mechanical behavior; alloy 625; aging; nondestructive testing
Source: Web Of Science
Added: August 6, 2018

1999 journal article

Characterization of gradients in mechanical properties of SA-533B steel welds using ball indentation

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 76(6), 361–369.

By: K. Murty n, P. Miraglia n, M. Mathew n, V. Shah* & F. Haggag*

co-author countries: United States of America 🇺🇸
author keywords: steel welds; automated ball indentation; stress-strain behavior; energy to fracture
Source: Web Of Science
Added: August 6, 2018

1999 journal article

Creep studies for Zircaloy life prediction in water reactors

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 51(10), 32–39.

By: K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

1999 journal article

Effect of dynamic strain aging on mechanical and fracture properties of A516Gr70 steel

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 76(14-15), 945–953.

By: C. Seok n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: dynamic strain aging; mechanical and fracture properties; fracture toughness
Source: Web Of Science
Added: August 6, 2018

1999 journal article

Low temperature aging embrittlement of CF-8 stainless steel

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 269(1-2), 186–196.

By: M. Mathew n, L. Lietzan n, K. Murty n & V. Shah*

co-author countries: United States of America 🇺🇸
author keywords: low temperature aging; aging-induced embrittlement; CF-8 stainless steel; automated ball indentation (ABI); fracture
Source: Web Of Science
Added: August 6, 2018

1999 journal article

Non-destructive studies on tensile and fracture properties of molybdenum at low temperatures (148 to 423 K)

JOURNAL OF MATERIALS SCIENCE, 34(7), 1497–1503.

By: M. Mathew n & K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

1999 journal article

Role and significance of source hardening in radiation embrittlement of iron and ferritic steels

JOURNAL OF NUCLEAR MATERIALS, 270(1-2), 115–128.

By: K. Murty n

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

1998 journal article

An investigation of the deformation mechanisms in Sn5%Sb alloy using tensile, creep and ABI tests from ambient to 473K

METALS AND MATERIALS-KOREA, 4(4), 799–802.

By: K. Murty n, M. Mathew n & F. Haggag*

co-author countries: United States of America 🇺🇸
author keywords: ABI; Sn5%Sb; creep; activation energy; deformation mechanism
Source: Web Of Science
Added: August 6, 2018

1998 journal article

Compressive mechanical behavior of nanocrystalline Fe investigated with an automated ball indentation technique

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 252(1), 36–43.

By: T. Malow n, C. Koch n, P. Miraglia n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: mechanical attrition; mechanical behavior in compression; nanocrystalline Fe
Source: Web Of Science
Added: August 6, 2018

1998 journal article

Effect of temperature on mechanical anisotropy of Zircaloy-4 sheet

METALS AND MATERIALS-KOREA, 4(4), 723–726.

By: Y. Wang n & K. Murty n

co-author countries: United States of America 🇺🇸
author keywords: Zircaloy; anisotropy; R parameter; P parameter; grid test
Source: Web Of Science
Added: August 6, 2018

1998 article

In-situ nuclear magnetic resonance investigation of strain, temperature, and strain-rate variations of deformation-induced vacancy concentration in aluminum

Murty, K. L., Detemple, K., Kanert, O., & Dehosson, J. T. M. (1998, January). METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 29, pp. 153–159.

By: K. Murty n, K. Detemple*, O. Kanert* & J. Dehosson*

co-author countries: Germany 🇩🇪 Netherlands 🇳🇱 United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

1998 journal article

Indentation-Energy-to-Fracture (IEF) parameter for characterization of DBTT in carbon steels using nondestructive Automated Ball Indentation (ABI) technique

Scripta Materialia, 38(4), 645–651.

By: F. Haggag, T. Byun, J. Hong, P. Miraglia & K. Murty

Source: NC State University Libraries
Added: August 6, 2018

1998 journal article

Nondestructive determination of tensile properties and fracture toughness of cold worked A36 steel

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 75(11), 831–840.

By: K. Murty n, M. Mathew n, Y. Wang n, V. Shah* & F. Haggag*

co-author countries: United States of America 🇺🇸
author keywords: cold worked A36 steel; fracture toughness; tensile properties; ball indentation
Source: Web Of Science
Added: August 6, 2018

1998 article

Special issue on interfacial reactions, solid state transformations and thermal management - Foreword

Ghosh, G., Kang, S., Murty, K. L., & Notis, M. (1998, November). JOURNAL OF ELECTRONIC MATERIALS, Vol. 27, pp. 1137–1137.

By: G. Ghosh*, S. Kang*, K. Murty n & M. Notis*

co-author countries: United States of America 🇺🇸
Source: Web Of Science
Added: August 6, 2018

1997 article

Tensile, creep, and ABI tests on Sn5%Sb solder for mechanical property evaluation

Murty, K. L., Haggag, F. M., & Mahidhara, R. K. (1997, July). JOURNAL OF ELECTRONIC MATERIALS, Vol. 26, pp. 839–846.

By: K. Murty n, F. Haggag* & R. Mahidhara*

co-author countries: United States of America 🇺🇸
author keywords: chemical diffusion; creep; deformation mechanisms; dislocation glide; dislocation pipe diffusion; grain-boundary diffusion; lead-free; self-diffusion; solder; tensile properties
Source: Web Of Science
Added: August 6, 2018

1997 journal article

Zircaloy life prediction and new generation zircaloys for LWRs

Transactions of the Indian Institute of Metals, 50(6), 533–562.

By: K. Murty

Source: NC State University Libraries
Added: August 6, 2018

book

An introduction to nuclear materials: Fundamentals and applications

Murty, K. L., & Charit, I. Weinheim, Germany: Wiley-VCH.

By: K. Murty & I. Charit

Source: NC State University Libraries
Added: August 6, 2018

conference paper

Effect of Mo and Bi additions on the microstructure of Zr-Cr-Fe alloy after beta-quenching

Wang, J. M., Luan, B. F., Murty, K. L., & Liu, Q. Mechanical and creep behavior of advanced materials, 183–192.

By: J. Wang, B. Luan, K. Murty & Q. Liu

Source: NC State University Libraries
Added: August 6, 2018

conference paper

Effect of c/a-ratio on crystallographic texture and mechanical anisotropy of hexagonal close packed metals

Murty, K. L. Thermec 2003: International Conference on Processing and Manufacturing of Advanced Materials (Materials science forum ; v. 426-432)., 426-4(2003), 3575–3580. Uetikon-Zurich, Switzerland: Sci-Tech Pub. Ltd.; Enfield, N.H.: Trans Tech Pub. Ltd.

By: K. Murty

Source: NC State University Libraries
Added: August 6, 2018

conference paper

Effect of low dose neutron irradiation on tensile behavior of ht-9 steel at room temperature

Sarkar, A., Alsabbagh, A. H., & Murty, K. L. TMS 2014 Supplemental Proceedings, 147–154.

By: A. Sarkar, A. Alsabbagh & K. Murty

Source: NC State University Libraries
Added: August 6, 2018

review

Effects of microstructure and processing methods on creep behavior of AZ91 magnesium alloy

Roodposhti, P. S., Sarkar, A., Murty, K. L., & Scattergood, R. O. [Review of ]. Journal of Materials Engineering and Performance, 25(9), 3697–3709.

By: P. Roodposhti, A. Sarkar, K. Murty & R. Scattergood

Source: NC State University Libraries
Added: August 6, 2018

conference paper

Fracture behavior and grain boundary sliding during high-temperature low-stress deformation of AZ31 magnesium alloy

Roodposhti, P. S., & Murty, K. L. Mechanical and creep behavior of advanced materials, 279–287.

By: P. Roodposhti & K. Murty

Source: NC State University Libraries
Added: August 6, 2018

chapter

In-situ NMR investigation of strain, temperature and strain-rate variations of deformation-induced vacancy concentration in aluminum

Murty, K. L., Detemple, K., K., & Dehosson, J. In O. B. P. K. Liaw, R. J. Arsenault, & R. E. Green Jr. (Eds.), Nondestructive evaluation and material properties III. Warrendale, Pa.: Minerals, Metals & Materials Society.

By: K. Murty, K. Detemple, . K. & J. Dehosson

Ed(s): O. P. K. Liaw, . R. J. Arsenault & R. Green

Source: NC State University Libraries
Added: August 6, 2018

conference paper

Low stress viscous creep in a ti-3al-2.5v tubing under internal pressurization

Gollapudi, S., Bhosle, V., Charit, I., & Murty, K. L. TMS 2010 139th Annual Meeting & Exhibition - Supplemental Proceedings, vol 1: Materials processing and properties, 755–762.

By: S. Gollapudi, V. Bhosle, I. Charit & K. Murty

Source: NC State University Libraries
Added: August 6, 2018

journal article

Microstructural approach to equal channel angular processing of commercially pure titanium-A review

Roodposhti, P. S., Sarkar, N. F. A., & Murty, K. L. Transactions of Nonferrous Metals Society of China, 25(5), 1353–1366.

By: P. Roodposhti, N. Sarkar & K. Murty

Source: NC State University Libraries
Added: August 6, 2018

journal article

structural materials issues for the next generation fission reactors

Charit, I., & Murty, K. L. JOM: the Journal of the Minerals, Metals & Materials Society, 62(9), 67–74.

By: I. Charit & K. Murty

Source: NC State University Libraries
Added: August 6, 2018

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.