Since joining NC State University, Wilson College of Textiles in 1991, Dr. Seyam established numerous research areas: Structural Mechanics of Woven Fabrics, Carding Dynamics, Needlepunching Process and Products, Direct Garment Manufacturing using Meltblowing and Robotic Technologies, Smart Electrotextile Structures, Computer Simulation and Formation of Nonwovens using Electrostatic Field (electrospinning and flocking), Formation of Nanofibers, Applications of MEMS in Textiles, Static Generation/Dissipation on Polymeric and Textiles’ Surfaces, Modeling of the Hydroentanglement Process, Fiber Reinforced Composites from High Performance Fibers and Sustainable Biodegradable Natural Fibers and Resins, Protection of High Performance Fibers from UV, Jacquard Fabrics on Demand, Seamless Shaped Garments and Medical Textiles, Laminates for Airships, Non-stop Tying-in Process, and 3D Printed Reinforced Composites from high-performance fiber and bio fiber. The successes of establishing this significant list of research areas is related to the effective leadership and academic experience coupled with industry experience of Dr. Seyam, recruiting excellent students, involving faculty and industry experts from several disciplines and securing substantial research funds. Dr. Seyam has published numerous peer reviewed journal and conference papers and presented extensively at international conferences, including keynote and invited talks. He authored two user-friendly computer software packages with extensive codes for manufacturing and engineering woven structures for the two of his former industry employers. He is co-inventor of seven patents in the areas of cold weather systems, electrotextile structures, airship, non-stop tying-in process, and multilayer fabrics.
2024 journal article
Assessment of Adhesion in Woven Fabric-Reinforced Laminates (FRLs) Using Novel Yarn Pullout in Laminate Test
JOURNAL OF COMPOSITES SCIENCE, 8(7).
2024 journal article
Development of Eco-Friendly Soy Protein Fiber: A Comprehensive Critical Review and Prospects
Fibers, 12(4), 31.
2024 journal article
Impact Performance of 3D Orthogonal Woven Composites: A Finite Element Study on Structural Parameters
JOURNAL OF COMPOSITES SCIENCE, 8(6).
2024 journal article
Influence of honeycomb structures on fluids transmission and heat retention properties; An initiative towards stretchable weaves
JOURNAL OF INDUSTRIAL TEXTILES, 54.
2024 journal article
Numerical Study of the Influence of the Structural Parameters on the Stress Dissipation of 3D Orthogonal Woven Composites under Low-Velocity Impact
TECHNOLOGIES, 12(4).
2024 article
Three-dimensional simulation of heat and moisture transfer in woven fabric structures
Wang, H., Li, J., Liu, Z., Yang, Y., & Seyam, A.-F. M. (2024, April 24). TEXTILE RESEARCH JOURNAL, Vol. 4.
2024 article
Two-Dimensional Materials in Textiles
He, N., Seyam, A.-F., & Gao, W. (2024, August 5). ADVANCED FIBER MATERIALS, Vol. 8.
2023 journal article
3D Printing, a Road to Sustainable Fashion
Novel Sustainable Process Alternatives for the Textiles and Fashion Industry, 1–27.
2023 article
Benchmarking automotive nonwoven composites from date palm midrib and spadix fibers in comparison to commercial leaf fibers
Elseify, L. A., Midani, M., El-Badawy, A. A., Seyam, A.-F. M., & Jawaid, M. (2023, February 15). BIOMASS CONVERSION AND BIOREFINERY, Vol. 2.
Contributors: L. Elseify *, M. Midani* , A. El-Badawy *, * & M. Jawaid *
2023 journal article
Benchmarking automotive nonwoven composites from date palm midrib and spadix fibers in comparison to commercial leaf fibers
Biomass Conversion and Biorefinery, 1–15.
2023 journal article
Innovation in Weaving at ITMA 2023 Lights the Road to Industry 4.0
Journal of Textile and Apparel, Technology and Management.
2023 article
Multi-layer fabric and coverings for architectural features and methods of manufacture
Colson, W. B., & Seyam, A.-F. M. (2023, November).
2023 article
Multiscale textile preforms and structures for natural fiber composites
Elsevier.
2023 article
Nomination and commentary on 'The geometry of cloth structure by Peirce F. T., Journal of the Textile Institute, 28:3, T45-112, 1937, and published online on 05 Dec 2008. https://doi.org/10.1080/19447023708658809'
Seyam, A.-F. (2023, June 3). JOURNAL OF THE TEXTILE INSTITUTE, Vol. 114, pp. 893–893.
2023 article
Véıculo aeróstato, e, método para produção de um material laminado para um véıculo aeróstato
2022 chapter
3D Orthogonal Woven Fabric Formation, Structure, and Their Composites
In Advanced Weaving Technology (pp. 361–399). Springer International Publishing Cham.
2022 article
A lighter-than-air vehicle with a hull, a laminate for such hull and a method of production of such laminate
2022 journal article
Coir Fibers and Micronized Rubber Modified Asphalt Binder
Journal of Textile and Apparel, Technology and Management.
2022 journal article
Development of hull material for high-altitude airship: A parametric study
Journal of Reinforced Plastics and Composites, 41(11-12), 444–458.
2022 journal article
Investigating the Aeroacoustic Properties of Porous Fabrics
AIAA Journal, 60(6), 3651–3660.
2022 journal article
Investigating the aeroacoustic properties of porous fabrics
AIAA Journal, 60(6), 3651–3660.
2021 journal article
Cellulose Microfibril and Micronized Rubber Modified Asphalt Binder
FIBERS, 9(4).
2021 journal article
Comparing Performance of 3D-Printed and Injection-Molded Fiber-Reinforced Composite Parts in Ring-Spinning Traveler Application
TECHNOLOGIES, 9(4).
2021 journal article
Impact resistance and failure mechanism of 3D printed continuous fiber-reinforced cellular composites
The Journal of The Textile Institute, 112(5), 752–766.
2021 journal article
Maximizing the Performance of 3D Printed Fiber-Reinforced Composites
JOURNAL OF COMPOSITES SCIENCE, 5(5).
2021 journal article
Microscopical Investigation of Resin Treated Cotton Fibers.
MEJ-Mansoura Engineering Journal, 6(2), 20–34.
2021 article
Modeling tensile behavior of 3D orthogonal woven green composites considering variability of natural fibers
Eldeeb, H., Midani, M., & Seyam, A.-F. M. (2021, May 21). JOURNAL OF THE TEXTILE INSTITUTE, Vol. 5.
2021 article
Non-stop tying-in process
Seyam, A.-F. M., & Oxenham, W. (2021, April).
2021 journal article
Surface functionalization of greige cotton knitted fabric through plasma and cationization for dyeing with reactive and acid dyes
Cellulose, 28(15), 9971–9990.
2021 journal article
Ultra-lightweight fiber-reinforced envelope material for high-altitude airship
The Journal of The Textile Institute, 113(9), 1799–1805.
2021 article
Un veh́ıculo más liviano que el aire con un casco, un laminado para dicho casco y un método de producción de dicho laminado
Vestergaard, F. M., Kim, D., Bradford, P. D., Seyam, A.-F. M., Vallabh, R., & Li, A. (2021, October).
2021 article
Vozilo sa oklopom lakše od vazduha, laminat za takav oklop i postupak za proizvodnju takvog laminata
2020 journal article
A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties
Composite Structures, 232, 111476.
2020 article
A lighter-than-air vehicle with a hull, a laminate for such hull and a method of production of such laminate
2020 journal article
Effect of structural parameters on the impact properties of multilayer composites from Tururi palm (Manicaria saccifera Gaertn.) fibrous material.
2020 journal article
Tensile properties of 3D printed continuous fiberglass reinforced cellular composites
The Journal of The Textile Institute, 12(1), 1–10.
2020 journal article
The road to improved fiber-reinforced 3D printing technology
Technologies, 8(4), 51.
2019 conference paper
2B4_0258_ THE EMBEDDED POLYMERIC OPTICAL FIBER (POF) IN 3D COMPOSITE FOR HEALTH MONITORING
Proceedings of the 19th World Textile Conference-Autex 2019.
2019 journal article
Electrostatic charge generation and buildup during contact and frictional electrification of woven textile fabrics
Indian Journal of Fibre & Textile Research (IJFTR), 44(4), 411–419.
2019 journal article
Evaluation of the Electrical Integrity of E-Textiles Subjected to Abrasion.
Journal of Textile & Apparel Technology & Management (JTATM), 11(1).
2019 journal article
Innovation in Weaving at ITMA 2019
Journal of Textile and Apparel, Technology and Management.
2019 journal article
MECHANISM OF ELECTRIFICATION AND CHARGE DECAY ON WOVEN FABRIC STRUCTURES
47Textile Research, 66.
2019 journal article
Smart Composite Using Optic Fiber Sensor Embedded in Three Dimensional Woven Preform
SAMPE 2019-Charlotte, NC, May 2019.
2019 article
Textile Palm Fibers from Amazon Biome
BY-PRODUCTS OF PALM TREES AND THEIR APPLICATIONS, Vol. 11, pp. 262–274.
Contributors: L. Andrade Pennas*, I. Cattani *, B. Leonardi *, n , M. Midani* , A. Monteiro *, J. Baruque-Ramos *
2019 journal article
Textile laminates for high-altitude airship hull materials--a review
Journal of Textile and Apparel, Technology and Management, 11(1).
2019 journal article
The role of hydrophilic finishes in frictional electrification and charge decay of woven fabric from polyester
JOURNAL OF THE TEXTILE INSTITUTE, 111(1), 1–9.
2018 journal article
A generalized analytical model for predicting the tensile behavior of 3D orthogonal woven composites using finite deformation approach
JOURNAL OF THE TEXTILE INSTITUTE, 109(11), 1465–1476.
2018 journal article
A novel approach to investigating frictional electrification and charge decay on woven textile fabrics treated with ionic antistatic and hydrophilic surface finishes
JOURNAL OF THE TEXTILE INSTITUTE, 110(3), 338–348.
2018 journal article
Effect of structural parameters on the impact properties of multilayer composites from Tururi palm (Manicaria sacciferaGaertn.) fibrous material
Journal of Natural Fibers, 7(2), 1–14.
Contributors: M. Midani n , A. Seyam n, A. Monteiro n & J. Baruque-Ramos *
2018 journal article
Evaluation of the electrical integrity of E-textiles subjected to environmental conditions
The Journal of the Textile Institute, 109(3), 393–409.
2018 journal article
The effect of the through-thickness yarn component on the in- and out-of-plane properties of composites from 3D orthogonal woven preforms
JOURNAL OF THE TEXTILE INSTITUTE, 110(3), 317–327.
Contributors: M. Midani n , n , M. Saleh * & M. Pankow n
2017 journal article
Evaluation of the electrical integrity of E-textiles subjected to environmental conditions
The Journal of The Textile Institute, 109(3), 393–409.
2016 journal article
A textile- based optical fiber sensor design for automotive seat occupancy sensing
JOURNAL OF THE TEXTILE INSTITUTE, 108(1), 49–57.
2016 journal article
Effect of structural parameters on the tensile properties of multilayer 3D composites from Tururi palm tree (Manicaria saccifera Gaertn) fibrous material
COMPOSITES PART B-ENGINEERING, 111, 17–26.
Contributors: A. Seyam n, A. Monteiro n, M. Midani n & J. Baruque-Ramos *
2016 journal article
Prioritizing sensor performance characteristics for automotive seat weight sensors in Quality Function Deployment (QFD)
Advances in Automobile Engineering, 5(153), 2.
2016 journal article
Smart Composite Textiles with Embedded Optical Fibers.
Structural Health Monitoring of Composite Structures Using Fiber Optic Methods, 299–337.
2016 journal article
The response of polymer optical fiber (POF) to bending and axial tension for the application of a POF sensor for automotive seat occupancy sensing
JOURNAL OF THE TEXTILE INSTITUTE, 108(1), 132–139.
2016 journal article
The response of polymer optical fiber (POF) to cyclic loading for the application of a POF sensor for automotive seat occupancy sensing
JOURNAL OF THE TEXTILE INSTITUTE, 108(1), 42–48.
2015 chapter
Antistatic and electrically conductive finishes for textiles
In Functional finishes for textiles (pp. 513–553). Woodhead Publishing.
2015 journal article
Evaluation of the integrity of 3D orthogonal woven composites with embedded polymer optical fibers
COMPOSITES PART B-ENGINEERING, 78, 79–85.
Contributors: T. Hamouda n , A. Seyam n & K. Peters n
2015 journal article
Improving UV Resistance of Fibers: Idealized Computational Model Predicting the Distribution of UV Blocking Cylindrical Nanoparticles in Protective Polymeric Layer
Journal of Engineered Fibers and Fabrics, 10(1), 155892501501000103.
2015 journal article
Improving high-altitude UV-Vis resistance of PBO braided tendons of NASA's super pressure balloons
JOURNAL OF THE TEXTILE INSTITUTE, 107(1), 136–143.
2015 journal article
Investigating the Loss of an Embedded Perfluorinated Optical Fiber for Different Resin's Gel Time
FIBERS AND POLYMERS, 16(10), 2135–2140.
Contributors: T. Hamouda n , A. Seyam n & K. Peters n
2015 journal article
Polymer optical fibers integrated directly into 3D orthogonal woven composites for sensing
SMART MATERIALS AND STRUCTURES, 24(2).
Contributors: T. Hamouda n , A. Seyam n & K. Peters n
2015 journal article
Pore channel tortuosity in 3D nonwoven structures
Researchgate. Net.
2014 conference paper
IMPACT RESISTANCE OF 3D ORTHOGONAL WOVEN FABRIC REINFORCED COMPOSITES IN TERMS OF COUPON LOCATION DURING RESIN INFUSION
International Conference on Technical Textiles and Nonwovens, 6, 8th.
2014 journal article
Shaped Seamless Woven Garments
Research Journal of Textile and Apparel, 18(2), 96–107.
2013 conference paper
Characterization of the UV Protection and creep upture of the super pressure balloon tendon
the Proceedings of the 22nd American Institute of Aeronautics and Astronautics Conference, Daytona Beach, Florida.
2013 journal article
Contact electrification of polymeric surfaces
Indian Journal of Fibre & Textile Research, 38(3), 265–269.
2013 journal article
Development of Seamless Woven Garments with Desired Shapes and Sizes
Journal of Scientific Research, 30.
2013 journal article
Development of UV Protective Sheath for High Performance Fibers for High Altitude Applications
FIBERS AND POLYMERS, 14(4), 647–652.
2013 journal article
Development of UV protective electrospun layers for high performance fibres for high altitude applications
Indian Journal of Fibre & Textile Research, 38, 121–125.
2013 journal article
Electrospinning of soy protein fibers and their compatibility with synthetic polymers
Journal of Textile and Apparel, Technology and Management, 8(1), 1–14.
2013 journal article
Frictional electrification on polymeric flat surfaces
Journal of Engineered Fibers and Fabrics, 8(1), 155892501300800115.
2013 journal article
Generalized geometric modeling of three-dimensional orthogonal woven preforms from spun yarns
JOURNAL OF THE TEXTILE INSTITUTE, 104(9), 914–928.
2013 journal article
Smart textiles: evaluation of optical fibres as embedded sensors for structure health monitoring of fibre reinforced composites
JOURNAL OF THE TEXTILE INSTITUTE, 104(8), 892–899.
Contributors: A. Seyam n & T. Hamouda n
2012 journal article
A General Geometrical Model for Predicting Color Mixing of Woven Fabrics from Colored Warp and Filling Yarns
Fibers and Polymers, 13(6), 795–801.
Event: 2nd International Scientific Conference Textiles of the Future at Belgium
2012 journal article
Composite Porous Membrane for Protecting High-Performance Fibers from Ultraviolet-Visible Radiation
JOURNAL OF APPLIED POLYMER SCIENCE, 128(2), 1297–1303.
2012 journal article
Development of electrospun iminochitosan for improved wound healing application
Journal of Engineered Fibers and Fabrics, 7(2), 155892501200700208.
2012 journal article
Effect of resin type on the signal integrity of an embedded perfluorinated polymer optical fiber
SMART MATERIALS AND STRUCTURES, 21(5).
Contributors: T. Hamouda n , K. Peters n & A. Seyam n
2012 journal article
Healing performance of wound dressing from cyanoethyl chitosan electrospun fibres
Indian Journal of Fibre & Textile Research, 37, 205–210.
2012 journal article
Weaving and Weaving Preparation, ITMA 2011
Textile World, 34–37.
2011 journal article
Color and weave relationship in woven fabrics
Advances in Modern Woven Fabrics Technology, 129–150.
2011 journal article
Developments in Jacquard woven fabrics
Specialist Yarn and Fabric Structures: Developments and Applications, 254–256.
2011 journal article
Effect of relative rubbing speed on the tribo-electrification of continuous filament yarn by stainless steel pins
JOURNAL OF THE TEXTILE INSTITUTE, 102(12), 1075–1085.
2011 journal article
Electrification of antistatic-treated polymeric surface
JOURNAL OF THE TEXTILE INSTITUTE, 103(2), 215–224.
2011 journal article
Modeling tortuosity in thin fibrous porous media using computational fluid dynamics
Journal of Porous Media, 14(9), 791–804.
Contributors: R. Vallabh n, J. Ducoste n , n & P. Banks-Lee n
2011 journal article
Needlepunched Composite Structures
Wiley Encyclopedia of Composites, 1–7.
2010 journal article
3D Woven Composites for Automotive Applications: Structure Parameters/Impact Energy Relationships
World Journal of Engineering, 7(1), 23–29.
2010 journal article
New approach for determining tortuosity in fibrous porous media
Journal of Engineered Fibers and Fabrics, 5(3), 155892501000500302.
2010 journal article
Prediction of Failure of 3D Woven Composite Structures using Embedded Fiber Optic Sensors
World Journal of Engineering, 7(1), 103–112.
2009 journal article
Static Generation and Dissipation of Polyester Continuous Filament Yarn
[Poster]. Journal of Textile Institute, 101(3), 261–269.
Event: US-Korea Conference 2009 at Raleigh, NC, USA
2009 journal article
Towards Automation of Color/Weave Selection in Jacquard Design: Model Verification
COLOR RESEARCH AND APPLICATION, 34(3), 225–232.
2008 journal article
A porous medium model of the hydroentanglement process
JOURNAL OF POROUS MEDIA, 11(1), 35–49.
2008 journal article
Combined numerical and experimental investigation on the effect of jet pressure and forming belt geometry on the hydroentanglement process
JOURNAL OF THE TEXTILE INSTITUTE, 100(4), 293–304.
2008 journal article
Devices for measuring electrostatic generation and dissipation on the surfaces of polymeric materials
JOURNAL OF THE TEXTILE INSTITUTE, 100(4), 338–349.
2008 journal article
Disc-shaped fibreweb formation with controlled fibre orientation using electrostatic forces: Theoretical analysis and experimental verification
Journal of the Textile Institute, 99(4), 375–383.
2008 journal article
Experimental and numerical investigation of the peeling force required for the detachment of fabric from the forming belt in the hydroentanglement process
JOURNAL OF THE TEXTILE INSTITUTE, 100(2), 99–110.
2008 patent
Fabric and yarn structures for improving signal integrity in fabric-based electrical circuits
Washington, DC: U.S. Patent and Trademark Office.
2008 article
Fabric and yarn structures for improving signal integrity in fabric-based electrical circuits
Dhawan, A., Ghosh, T. K., Seyam, A. M., & Muth, J. (2008, March).
2008 patent
Methods and systems for selectively connecting and disconnecting conductors in a fabric
Washington, DC: U.S. Patent and Trademark Office.
2008 article
Methods and systems for selectively connecting and disconnecting conductors in a fabric
Dhawan, A., Ghosh, T. K., Muth, J., & Seyam, A. (2008, February).
2008 journal article
Prediction of Color Attributes through Geometric Modeling
Research Journal of Textile and Apparel, 12(1), 19–31.
2008 conference paper
Stretch potential of woven fabrics containing spandex
The 5th International Conference of Textile Research Division, National Research Center Cairo, Egypt.
2008 conference paper
Three-dimensional woven composites for automotive applications
Recent Advances in Textile Composites, 280–287.
2008 journal article
Towards automation of colour/weave selection in Jacquard designs: model verification through visual assessment
COLORATION TECHNOLOGY, 124(1), 48–55.
2008 journal article
Warp break detection in Jacquard weaving using Micro-Electro-Mechanical Systems: Effect of yarn type
TEXTILE RESEARCH JOURNAL, 78(8), 664–670.
Contributors: A. Seyam n, J. Lee n, G. Hodge n , W. Oxenham n & E. Grant n
2008 journal article
Warp breaks detection in Jacquard weaving using MEMS: Effect of weave on break signals
Journal of Engineered Fibers and Fabrics, 3(1), 25–31.
2008 journal article
Warp breaks detection in Jacquard weaving using MEMS: Effect of weave on break signals
Journal of Engineered Fibers and Fabrics, 3(1), 155892500800300104.
2008 journal article
Wireless yarn tension measurement, and control in direct cabling process
JOURNAL OF THE TEXTILE INSTITUTE, 100(5), 400–411.
Contributors: V. Shankam n, W. Oxenham n, n , E. Grant n & G. Hodge n
2007 conference paper
Dynamic electrostatic generation and dissipation on polymer surfaces
301–311.
2007 journal article
Fibers Caught in the Knuckles of the Forming Wires: Experimental Measurements and Physical Origins of the Force of Peeling in the Hydroentanglement Process
Journal of Engineered Fibers and Fabrics, 2(3), 155892500700200301.
2007 journal article
Fibers caught in the knuckles of the forming wires: Experimental measurements and physical origins of the force of peeling in the hydroentanglement process
Journal of Engineered Fibers and Fabrics, 2(3), 1–9.
2007 journal article
Formation of Fiberwebs from Staple Fibers with Controlled Fiber Orientation Using Electrostatic Forces: Theoretical Analysis
Journal of Engineered Fibers and Fabrics, 2(2), 155892500700200202.
2007 journal article
Formation of fiberwebs from staple fibers with controlled fiber orientation using electrostatic forces: Theoretical analysis
Journal of Engineered Fibers and Fabrics, 2(2), 17–24.
2007 journal article
Prevention of warp breaks in Jacquard weaving
Fibers and Polymers, 8(1), 79–83.
Contributors: , J. Lee n, G. Hodge n, W. Oxenham n & E. Grant n n
2007 journal article
Simulation of fiber entanglement by modeling vorticity in water flow field
TEXTILE RESEARCH JOURNAL, 77(5), 312–329.
2007 journal article
Warp breaks detection in Jacquard weaving using MEMS: System development
JOURNAL OF THE TEXTILE INSTITUTE, 98(3), 275–280.
Contributors: J. Lee n, A. Seyam n, G. Hodge n , W. Oxenham n & E. Grant n
2006 journal article
Electro-static web formation
National Textile Center.
2006 article
Investigation of ultra violet (UV) resistance for high strength fibers
NEXT GENERATION OF SCIENTIFIC BALLOON MISSIONS, Vol. 37, pp. 2052–2058.
2006 journal article
Modeling of the hydroentanglement process
Journal of Engineered Fibers and Fabrics, 1(2), 155892500600100201.
2005 journal article
An Examination of the Hydroentangling Process Variables
International Nonwovens Journal, 14(1), 25–33.
2005 journal article
An examination of the hydroentangling process variables
International Nonwovens Journal, (1), 1558925005os–1400104.
2005 journal article
Application of MEMS in yarn processing and quality control
Textile Asia, 36(12), 52–54.
2005 conference paper
Application of MEMS in yarn processing and quality control: Dynamic yarn tension measurement and control in direct cabling machines
A new era: National Textile Center Forum, March 20-22, 2005: Textile Institute, 84th Annual World Conference, March 22-25, 2005, Back-to-Back Meetings in Raleigh, North Carolina, USA, 1–9. [Manchester, England]: The Textile Institute.
2005 conference paper
Application of MEMS in yarn processing and quality control: Dynamic yarn tension measurement and control in two for one twisting mechanism
A new era: National Textile Center Forum, March 20-22, 2005: Textile Institute, 84th Annual World Conference, March 22-25, 2005, Back-to-Back Meetings in Raleigh, North Carolina, USA. [Manchester, England]: The Textile Institute.
2005 conference paper
Automatic warp breaks monitoring and repair in Jacquard weaving using MEMS : Instrumentation and signal analysis
A new era: National Textile Center Forum, March 20-22, 2005: Textile Institute, 84th Annual World Conference, March 22-25, 2005, Back-to-Back Meetings in Raleigh, North Carolina, USA. [Manchester, England]: The Textile Institute.
2005 journal article
Color on Demand for Jacquard Fabrics
Research Journal of Textile and Apparel, 9(4), 26–37.
2005 patent
Methods and systems for selectively connecting and disconnecting conductors in a fabric
Washington, DC: U.S. Patent and Trademark Office.
2005 article
Methods and systems for selectively connecting and disconnecting conductors in a fabric
Dhawan, A., Ghosh, T. K., Muth, J., & Seyam, A. (2005, February).
2005 journal article
Warp break detection in Jacquard weaving
Textile Asia, 36(7), 29–34.
2005 conference paper
Warp breaks detection in Jacquard weaving using MEMS
A new era: National Textile Center Forum, March 20-22, 2005: Textile Institute, 84th Annual World Conference, March 22-25, 2005, Back-to-Back Meetings in Raleigh, North Carolina, USA, 1–18. [Manchester, England]: The Textile Institute.
2004 conference paper
Automation of warp break repair
"Quality textiles for quality life" : proceedings of the Textile Institute 83rd World Conference (83rd TIWC) : May 23-27, 2004, Shanghai, China, 1345–1349. Manchester, UK: Textile Institute.
2004 conference paper
Automation of warp break repair: Warp break location and frequency in Jacquard weaving
83rd Textile Institute World Conference, Shanghai China, May 2004. Manchester, UK: Textile Institute.
2004 journal article
Developing Portable Acoustic Arrays on a Large-Scale E-Textile Substrate
International Journal of Clothing Science and Technology, 16(1/2), 73–83.
2004 journal article
Developing seamless shaped woven medical products
Journal of Medical Engineering & Technology, 28(3), 110–116.
2004 journal article
Evaluating the effectiveness of bifid medical needles for protection from needle-stick injuries
TEXTILE RESEARCH JOURNAL, 74(2), 101–107.
2004 journal article
FIBER-BASED ELECTRICAL AND OPTICAL DEVICES AND SYSTEMS
Textile Progress, 36(2-3), 1–84.
2004 journal article
Fiber-based electrical devices
Textile Progress, 36(2/3).
2004 journal article
Giant vehicles
Journal of Textile and Apparel Technology and Management, 3(4).
2004 journal article
ITMA 2003: Weaving Technology
Textile World, 34(2), 39.
2004 conference paper
Improving uv resistance of high strength fibers used in large scientific balloons
35th COSPAR Scientific Assembly, 35, 941.
2004 journal article
Influence of Fiber Type On Fiberweb Properties in High-Speed Carding
International Nonwovens Journal, (2), 1558925004os–1300213.
2004 journal article
Influence of fiber type on fiberweb properties in high-speed carding
International Nonwovens Journal, 13(2), 48–53.
2004 journal article
Meltblown Structures Formed by Robotic and Meltblowing Integrated System: The Influence of the Curvature of Collector on the Structural Properties of Meltblown Fiberwebs
International Nonwovens Journal, (3), 1558925004os–1300308.
2004 journal article
Meltblown Structures Formed by Robotic and Meltblowing Integrated System: The Influence of the Curvature on the Structural Properties of Meltblown Fiberwebs
International Nonwovens Journal, 13(3), 35–42.
2004 journal article
Meltblown structures formed by robotic and meltblowing integrated system: Interaction between the fiber diameter, orientation distribution and pore diameter of simulated networks and real webs
International Nonwovens Journal, 13(4), 1558925004os–1300402.
2004 journal article
Static Generation and Control in Textile Systems
Journal of Electrostatics, 40(41), 3–12.
2004 journal article
TECHNOLOGY-The Road to True Wearable Electronics
Textiles Magazine, 31(1), 17–22.
2004 journal article
Woven fabric-based electrical circuits - Part I: Evaluating interconnect methods
Textile Research Journal, 74(10), 913–919.
2004 journal article
Woven fabric-based electrical circuits - Part II: Yarn and fabric structures to reduce crosstalk noise in woven fabric-based circuits
TEXTILE RESEARCH JOURNAL, 74(11), 955–960.
2004 journal article
经纱断头自动检测系统——提花织机经纱断头位置和断头频率的检测
纺织服装周刊, (18), 10–10.
2003 conference paper
Developing portable acoustic arrays on a large-scale e-textile substrate
INTEDEC 2003: fibrous assemblies at the design and engineering interface. [Edinburgh]: RIFleX, Heriot-Watt University.
2003 journal article
Electrifying opportunities
Textile World, 2, 33–37.
2003 journal article
Electrifying opportunities: The continued development of woven fabric technology paves the way for electrotextile growth
Textile World (New York, N.Y.), 153(2), 30–33.
2003 journal article
Forming shaped/molded structures by integrating meltblowing and robotic technologies
TEXTILE RESEARCH JOURNAL, 73(1), 15–21.
2003 journal article
Machine Italia: Weaving
Textile World (New York, N.Y.), 153(6), 38–40.
2003 journal article
Machines Italia
Textile World (New York, N.Y.), 153(6), 34–45.
2003 journal article
Meltblown structures formed by a robotic and meltblowing integrated system: Impact of process parameters on pore size
TEXTILE RESEARCH JOURNAL, 73(11), 971–979.
2003 journal article
Protective system from medical needle-sticks. Part I: Background and system development
FIBERS AND POLYMERS, 4(2), 54–58.
2003 journal article
Protective system from medical needle-sticks. Part II: Evaluation of woven structures and bifid needles
FIBERS AND POLYMERS, 4(3), 129–134.
2003 journal article
Study of Meltblown Structures Formed by Robotic and Meltblowing Integrated System: Impact of Process Parameters on Fiber Diameter Distributions
International Nonwovens Journal, 12(1), 1558925003os–1200111.
2003 journal article
Texture evolution in hydroentangled nonwovens
International Nonwovens Journal, 12(1), 1558925003os–1200110.
2003 journal article
Texture retention after fabric-to-fabric abrasion
TEXTILE RESEARCH JOURNAL, 73(4), 316–321.
2003 journal article
The Italian weaving industry is preparing for intensified competition
Journal of Textile and Apparel Technology and Management, 3(1).
2003 journal article
The impact of input energy on the performance of hydroentangled nonwoven fabrics
International Nonwovens Journal, 12(2), 1558925003os–1200211.
2003 journal article
Weavability limit of yarns with thickness variation in shuttleless weaving
FIBERS AND POLYMERS, 4(4), 176–181.
2003 journal article
Weaving Technology Advances and Challenges II
Journal of Textile and Apparel. Technology and Management. Volume3, 3(1).
2003 journal article
Weaving and weaving preparation at ITMA 2003
Journal of Textile and Apparel Technology and Management, 3(3).
2002 conference paper
A rule-based robotic control approach to melt-blowing for shaped fabric structures
ISCAS 2000 Geneva : proceedings [of] the 2000 IEEE International Symposium on Circuits and Systems, Emerging technologies for the 21st century : May 28-31, 2000, International Conference Center (CICG) of Geneva, Switzerland.
2002 journal article
Development of woven fabric-based electrical circuits
MRS Online Proceedings Library (OPL), 736, D1–9.
2002 journal article
Electrotextiles—Present and Future
MRS Online Proceedings Library, 736, 1–6.
2002 journal article
Formation of textile structures for giant-area applications
MRS Online Proceedings Library (OPL), 736, D1–3.
2002 journal article
Initial development of a portable acoustic array on a Large-scale e-textile substrate
MRS Online Proceedings Library (OPL), 736, D3–7.
2002 journal article
Meltblown structures formed by a robotic and meltblowing integrated system: Impact of process parameters on fiber orientation and diameter distribution
TEXTILE RESEARCH JOURNAL, 72(12), 1033–1040.
2002 conference paper
On the use of robotics for melt-blowing to form shaped/molded fabric structures
Proceedings : 2000 IEEE International Conference on Robotics and Automation April 24-28, 2000, San Francisco Hilton Hotel, San Francisco, California.
2002 journal article
Role of Fiber Finish in the Conversion of Fiber to Nonwovens Part 3: Finish Performance as a Mechanical Processing Aid in Needlepunching
International Nonwovens Journal, (2), 1558925002OS–01100205.
2002 journal article
Role of Fiber Finish in the Conversion of Fiber to Nonwovens—Part II: Finish Performance as a Mechanical Processing Aid in Carding
International Nonwovens Journal, (1), 1558925002OS–01100108.
2002 journal article
Role of fiber finish in the conversion of fiber to nonwovens, part II: Finish performance as a mechanical processing aid in carding
International Nonwovens Journal, 11(1), 30–37.
2002 journal article
Role of fiber finish in the conversion of fiber to nonwovens, part III: Finish performance as a mechanical processing aid in needlepunching
International Nonwovens Journal, 11(2), 13–20.
2002 journal article
Signal propagation and multiplexing challenges in electronic textiles
MRS Online Proceedings Library (OPL), 736, D1–2.
2002 journal article
Structural design of woven fabric: Theory and practice
Textile Progress, 31(3).
2002 conference paper
Synthesis, characterization and application of environmentally friendly sizes to cotton warps
2002 conference paper
Texture evolution in hydroentangled nonwovens
INTC 2002: International Nonwovens Technical Conference: conference proceedings: September 24-26, 2002, Renaissance Waverly Hotel, Atlanta, Georgia. Atlanta, Ga.: Tappi Press.
2002 journal article
The Structural Design of Woven Fabrics: Theory and Practice-A critical appreciation of recent developments
Textile Progress, 31(3).
2002 conference paper
The impact of input energy on the performance and aesthetics of hydroentangled fabrics
Conference proceedings : Joint INDA-TAPPI Conference, INTC 2002, International Nonwovens Technical Conference, September 24-26, 2002, Renaissance Waverly Hotel, Atlanta, Georgia. Cary, N.C. : INDA, Association of the Nonwoven Fabrics Industry.
2002 conference paper
The road to true wearable electronics
2002 conference paper
Weaving technology: Advances and challenges
2001 journal article
Carding of microfibers
J. Text. Apparel Tech. Manag, 1(2), 1–9.
2001 journal article
Formation of Carded Webs From Microfibers
International Nonwovens Journal, 10(1), 1558925001os–1000107.
2001 journal article
Formation of shaped/molded meltblowing nonwoven structures
Journal of Textile and Apparel Technology and Management, 1(1).
2001 journal article
Formation of shaped/molded structures meltblowing nonwoven structures
Journal of Textile and Apparel Technology and Management, 1(1).
2001 journal article
Role of Fiber Finish in the Conversion of Fiber to Nonwovens—Part 1: Need for an Unconventional Method to Evaluate Finish Performance as a Mechanical Process Aid
International Nonwovens Journal, (4), 1558925001os–1000408.
2001 journal article
Role of fiber finish in the conversion of fiber to nonwovens, part I: Need for an unconventional method to evaluate finish performance as a mechanical process aid
International Nonwovens Journal, 10(4), 29–36.
2001 conference paper
Role of fiber finish in the conversion of fiber to nonwovens: Finish performance as a mechanical processing aid in needlepunching
INTC 2001 : International Nonwovens Technical Conference : conference proceedings : September 5-7, 2001, Renaissance Harborplace Hotel, Baltimore, Maryland. Cary, N.C. : INDA, Association of the Nonwoven Fabrics Industry.
2001 conference paper
Smart sensor to monitor warp tension and breaks on a weaving machine
1–12.
2001 conference paper
Smart sensors to monitor warp tension and breaks on a loom
2001 conference paper
Smart sensors to monitor warp tension and breaks on a weaving machine
An odyssey in fibres and space : Textile Institute 81st World Conference : Melbourne, Australia, Melbourne Convention Centre, Sunday 1st-Wednesday 4th April, 2001. Manchester, England : Textile Institute.
2000 journal article
3. Advances in Weaving and Weaving Preparation
Textile Progress, 30(1-2), 22–40.
2000 journal article
Advances in weaving and weaving preparation at ITMA '99
Textile Progress, 30(1/2), 22–40.
2000 conference paper
Application of micromachines to textiles: Using smart sensors to monitor warp tension and breaks during formation of woven fabrics
Proceedings of the International Mechanical Engineering Congress & Exposition, ASME, Orlando (FL), November 2000. New York: ASME.
2000 journal article
Formation of Shaped/Molded Meltblowing Nonwoven Structures
Journal of Textile and Apparel, Technology and Management, 1(1).
2000 conference paper
Impact of needling parameters on the location of maximum needle force due to fiberweb/needle interaction
INDA's Book of Papers '00 International Conference : book of papers, Charlotte Hilton Hotel, Charlotte, North Carolina, USA, April 26-28 2000. Cary, N.C. : INDA, The Association of the Nonwoven Fabrics Industry.
2000 conference paper
Micromachines and textiles: Matching two industries
2000 journal article
Micromachines and textiles: Matching two industries
Textile Asia, 31, 58–66.
2000 conference paper
ROLE OF FIBER FINISH IN THE CONVERSION OF FIBER TO NONWOVENS: FINISH PERFORMANCE AS A MECHANICAL PROCESSING AID IN CARDING
TAPPI NONWOVENS CONFERENCE, 25–20.
Event: TAPPI PRESS
2000 conference paper
Role of fiber finish in the conversion of fiber to nonwovens: Finish performance as a mechanical aid in carding
Book of papers : Joint INDA-TAPPI Conference, INTC 2000, International Nonwovens Technical Conference, September 26-28, 2000, Hotel Inter-Continental, Dallas, Texas. Cary, N.C. : INDA, Association of the Nonwoven Fabrics Industry.
2000 journal article
The Assessment of Cross Machine Openness Uniformity of a Fiber Feed Matt
International Nonwovens Journal, 9(4), 1558925000OS–900405.
2000 journal article
The assessment of cross machine openness uniformity of a fiber feed matt
International Nonwovens Journal, 9(4), 9–14.
2000 conference paper
Weavability limit of specialty yarns in shuttle and shuttleless weaving
Thirteenth annual Engineered Fiber Selection System Research Forum proceedings: November 2-3, 2000, Raleigh, North Carolina. Cary, N.C. : Cotton Inc.
2000 journal article
Weavability limit of yarns with thickness variation in shuttleless weaving: The single filling yarn feeder case
TEXTILE RESEARCH JOURNAL, 70(2), 129–134.
1999 journal article
Applications of On-line Monitoring of Dynamic Forces Experienced by Needles during Formation of Needled Fabrics
International Nonwovens Journal, 8(2), 1558925099OS–800220.
1999 journal article
Carding dynamics - Part I: Previous studies of fiber distribution and movement in carding
Textile Research Journal, 69(2), 90–96.
1999 journal article
Carding dynamics - Part II: Development of a device for on-line measurement of two-dimensional fiber loading on card elements
Textile Research Journal, 69(3), 155–161.
1999 journal article
Carding of microfibers
Beltwide Cotton Conferences. Proceedings, 2(1999), 1353–1358.
1999 conference paper
Carding of microfibers II
Book of papers: INDA-TEC 99, International Nonwovens Conference, September 21-23, 1999, Renaissance Waverly Hotel, Atlanta, Georgia, USA. Cary, N.C. : INDA, Association of the Nonwoven Fabrics Industry.
1998 conference paper
Development of a flexible photometric device for on-line monitoring of fiber loading on card surfaces
Book of papers: INDA-TEC 98, largest International Nonwovens Conference: September 15-17, 1998, Trump Plaza Hotel, Atlantic City, NJ. Cary, N.C. : INDA, Association of the Nonwoven Fabrics Industry.
1998 conference paper
Needle force parameters/needled fabric performance relationships
INDA's Needlepunch '98 International Conference : book of papers, Charlotte Hilton Hotel, Charlotte, North Carolina, USA, October 14-16, 1998. Cary, N.C. : INDA, Association of the Nonwoven Fabrics Industry.
1998 journal article
Signal analysis of dynamic forces experienced by individual needles in high speed needle punching
TEXTILE RESEARCH JOURNAL, 68(4), 296–301.
1997 journal article
A generalized model for predicting load-extension properties of woven fabrics
TEXTILE RESEARCH JOURNAL, 67(12), 866–874.
1997 journal article
Effect of needle position and orientation on forces experienced by individual needles during needle punching
TEXTILE RESEARCH JOURNAL, 67(10), 772–776.
1996 journal article
Investment Decisions in Weaving--An Investment Support Model (ISM)
Journal of the Textile Institute, 87(1), 6–20.
1996 journal article
Investment decisions in weaving. An investment support model (ISM)
Journal of the Textile Institute, 87(1), 6–20.
1995 journal article
Application of FAST System in Nonwovens Part I: Objective Evaluation of Fabric Performance
INTERNATIONAL NONWOVENS JOURNAL, 7(2), 31–31.
1995 journal article
Application of FAST System in Nonwovens Part II: Developing Tailorability Control Charts for Nonwoven Medical Apparel Applications
INTERNATIONAL NONWOVENS JOURNAL, 7(2), 39–39.
1995 journal article
Investitionsentscheidungen in der Weberei
Melliand Textilberichte-International Textile Reports-German Edition, 76(10), 810–814.
1995 journal article
Investitionsentscheidungen in der weberei
Melliand Textilberichte, 76(10), 810–815.
1995 journal article
Investment decisions in weaving
Melliand International, 3(9), 156–160.
1995 journal article
Investment decisions in weaving
MELLIAND TEXTILBERICHTE INTERNATIONAL TEXTILE REPORTS, 76, E-201.
1995 journal article
MECHANICS OF WOVEN FABRICS .5. IMPACT OF WEAVABILITY LIMIT PARAMETERS ON PROPERTIES OF FABRICS FROM YARNS WITH THICKNESS VARIATION
TEXTILE RESEARCH JOURNAL, 65(1), 14–25.
1995 journal article
MODELING AND SIMULATION FOR CONTROL IN CARDING
TEXTILE RESEARCH JOURNAL, 65(11), 638–643.
1995 journal article
Mechanics of Needlepunching Process and Products, Part II: An On-Line Device to Measure the Punching Forces Experienced by Individual Needles
Int. Nonwovens J., 7(3), 31–37.
1995 journal article
Mechanics of needlepunching process and products, part II: An on-line device to measure the punching forces experienced by individual needles
International Nonwovens Journal, 7(3), 31–37.
1994 conference paper
Application of FAST system in nonwovens, objective evaluation of fabric performance: Fingerprint limits for SMS category
INDA-TEC 94: book of papers ; Nonwovens technologies for disposable and durable applications. Cary, NC : INDA, Association of the Nonwoven Fabrics Industry.
1994 journal article
MECHANICS OF WOVEN FABRICS .4. CRITICAL-REVIEW OF FABRIC DEGREE OF TIGHTNESS AND ITS APPLICATIONS
TEXTILE RESEARCH JOURNAL, 64(11), 653–662.
1994 journal article
Manufacturing Technology for Apparel Automation--Layup Module Part II: The Impact of Fabric Properties on the Gap Length between Two Slats
International Journal of Clothing Science and Technology, 6(1), 3–13.
1994 conference paper
Manufacturing technology for apparel automation - layup module, Part II: The impact of fabric properties on the gap length between two slats
Fifth Annual Academic Apparel Research Conference, 17-18 February, 1994, Lafayette Hilton and Towers, Lafayette, Louisiana. Chicago, : Manufacturing Technology Information Analysis Center.
1994 journal article
Mechanics of Needlepunching Process and Products, Part I: Critical Review of Previous Work on Forces Experienced by Needles During Needling of Nonwoven Fabrics
Int. Non-Wovens J., 6(2), 32–36.
1994 journal article
Mechanics of needlepunching process and products, part I: Critical review of previous work on forces experienced by needles during needling of nonwoven fabrics
International Nonwovens Journal, 6(2), 32–36.
1993 conference paper
Application of CIM to wet-lay nonwovens web forming systems
INDA Fundamental Research Conference, Clemson, SC, July 1993.
1993 journal article
MECHANICS OF WOVEN FABRICS .3. CRITICAL-REVIEW OF WEAVABILITY LIMIT STUDIES
TEXTILE RESEARCH JOURNAL, 63(7), 371–378.
1993 journal article
Manufacturing Technology for Apparel Automation—Lay up Module: PART I: SLAT DESIGN
International Journal of Clothing Science and Technology, 5(3/4), 44–59.
1993 conference paper
Manufacturing technology for apparel automation - layup module, Part I: Slat design
Fourth Annual Academic Apparel Research Conference, 8-9 February, 1993, Sheraton Raleigh Hotel, Raleigh, North Carolina, 4/5(3/4), 44–59.
1993 conference paper
Measurement of needle punching dynamic forces: The single needle case
INDA-TEC 93: book of papers: September 21-24, 1993, Doral Ocean Beach Resort, Miami Beach, Florida. Cary, NC : INDA, Association of the Nonwoven Fabrics Industry.
1993 conference paper
Measurement of needlepunching forces: The single needle case
INDA-TEC 93: book of papers: September 21-24, 1993, Doral Ocean Beach Resort, Miami Beach, Florida. Cary, NC: INDA, Association of the Nonwoven Fabrics Industry.
1990 journal article
MECHANICS OF WOVEN FABRICS .1. THEORETICAL INVESTIGATION OF WEAVABILITY LIMIT OF YARNS WITH THICKNESS VARIATION
TEXTILE RESEARCH JOURNAL, 60(7), 389–404.
1990 journal article
MECHANICS OF WOVEN FABRICS .2. EXPERIMENTAL-STUDY OF WEAVABILITY LIMIT OF YARNS WITH THICKNESS VARIATION
TEXTILE RESEARCH JOURNAL, 60(8), 457–463.
1989 patent
Protective clothing system for cold weather
Washington, DC: U.S. Patent and Trademark Office.
1989 article
Protective clothing system for cold weather
Mann, J. A., Ambrosiani, V. J., Wilder, C. D., & Seyam, A. M. (1989, February).
1985 thesis
ON THE MECHANICS OF WOVEN FABRICS (MAXIMUM WEAVABILITY, MAXIMUM CONSTRUCTION)
North Carolina State University.
1984 journal article
STRETCH MERCERIZATION OF COTTON FIBERS .1. FIBER AND YARN PROPERTIES
TEXTILE RESEARCH JOURNAL, 54(5), 325–330.
1984 journal article
STRETCH MERCERIZATION OF COTTON FIBERS .2. FABRIC PROPERTIES
TEXTILE RESEARCH JOURNAL, 54(6), 370–377.
1983 journal article
INTERPRETATION OF LOSS IN STRENGTH AND BREAKING ELONGATION OF RESIN-TREATED COTTON FIBERS USING MICROSCOPICAL TECHNIQUE
JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 105(1), 16–20.
1981 report
Energy conservation in false twist texturing. Final report
North Carolina State Univ., Raleigh (USA). School of Textiles.
1981 journal article
Factorial analysis of the effect of cotton yarn processing factors on the stretch properties of the resultant Jersey knitted fabrics
Review of Industrial Management and Textile Science, 20(2).
1981 journal article
Factors affecting the properties of resin-treated textured cotton yarns, part I: The effect of texturing process variables
Cellulose Chemistry and Technology, 15, 49–56.
1981 journal article
Factors affecting the properties of resin-treated textured cotton yarns. I. The effect of texturizing process variables
Cellulose Chemistry and Technology, 15(1).
conference paper
Development of UV Protective Polymeric Layer for High Performance Fibers
Said, M., Seyam, A.-F., Won, J., & Hassanin, A. 11th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference, including the AIAA Balloon Systems Conference and 19th AIAA Lighter-Than, 6937.
journal article
EFFECT OF FIBER PACKING ON PHYSICAL PROPERTIES OF 3D ORTHOGONAL WOVEN PREFORMS: THEORETICAL STUDY
Seyam, A.-F. M., & İnce, M. E.
journal article
Factors affecting the properties of resin treated textured cotton yarns. Part 1. The effect of texturizing process variables. Part 2. The effect of yarn parameters
Soliman, H., Sultan, M., Ei-Bayoumi, A., & Seyam, A. Cellulose Chemistry and Technology, 15, 49–5657.
journal article
Protection of Braided Tendons of Super Pressure Balloon against Ultra-Violet and Visible Light
Vallabh, R., Hassanin, A. H., Said, M. A., & Seyam, A.-F. M.
journal article
STATIC GENERATION/DISSIPATION MEASUREMENTS ON POLYMERIC FILMS’SURFACES
Liu, L., Cai, Y., Seyam, A.-F., & Oxenham, W.
journal article
STATIC GENERATION/DISSIPATION MEASUREMENTS ON YARNS’SURFACES
Cai, Y., Liu, L., Seyam, A.-F. M., Oxenham, W., & Theyson, T.
journal article
Stretch properties of knitted fabrics containing spandex
Mathur, K., Vallabh, R., Hauser, P., & Seyam, A.-F. M. Textile Future.
journal article
THE EFFECT OF IN-PLANE YARNS’LINEAR DENSITY ON PHYSICAL PROPERTIES OF 3D ORTHOGONAL WOVEN PREFORMS
Ince, M. E., & Seyam, A.-F. M.
journal article
THREE-DIMENSIONAL ORTHOGONAL WOVEN COMPOSITES INCORPORATION IN THE AUTOMOTIVE SUPPLY CHAIN
TAYLOR, D. A. L. I. A., SEYAM, A. B. D. E. L.-F. A. T. T. A. H. M., POWELL, N. A. N. C. Y. B., & MOHAMED, M. A. N. S. O. U. R. H.
Updated: April 28th, 2024 14:29
2000 - present
2018 - 2024
2012 - 2013
2008 - 2012
2003 - 2008
1994 - 2000
1997 - 2000
1991 - 1994
1988 - 1991
1986 - 1988
1974 - 1979
1972 - 1974
Updated: April 27th, 2024 00:49
1980 - 1985
1975 - 1978
1967 - 1972
Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.
Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.