Khaled M. Youssef

Leonard, S., Markevich, V. P., Peaker, A. R., Hamilton, B., Yousseff, K., & Rozgonyi, G. (2014). Molybdenum nano-precipitates in silicon: A TEM and DLTS study. Physica Status Solidi. B, Basic Solid State Physics, 251(11), 2201–2204.

Zheng, H., Jagannadham, K., & Youssef, K. (2014). Thermal conductivity of exfoliated p-type bismuth antimony telluride. Journal of Electronic Materials, 43(2), 320–328.

Youssef, K., Shi, M., Radue, C., Good, E., & Rozgonyi, G. (2013). Effect of oxygen and associated residual stresses on the mechanical properties of high growth rate Czochralski silicon. Journal of Applied Physics, 113(13).

Shi, M. R., Youssef, K., & Rozgonyi, G. A. (2013). Fracture strength of photovoltaic silicon wafers evaluated using a controlled flaw method. Advanced Engineering Materials, 15(8), 756–760.

Zdanowicz, E., Dow, T. A., Scattergood, R. O., & Youssef, K. (2013). Nanostructure fabrication on germanium and silicon by nanocoining imprint technique. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 37(4), 871–879. https://doi.org/10.1016/j.precisioneng.2013.05.004

Roy, D., Atwater, M. A., Youssef, K., Ledford, J. C., Scattergood, R. O., & Koch, C. C. (2013). Studies on thermal stability, mechanical and electrical properties of nano crystalline Cu99.5Zr0.5 alloy. JOURNAL OF ALLOYS AND COMPOUNDS, 558, 44–49. https://doi.org/10.1016/j.jallcom.2012.11.004

Bahmanpour, H., Youssef, K. M., Horky, J., Setman, D., Atwater, M. A., Zehetbauer, M. J., … Koch, C. C. (2012). Deformation twins and related softening behavior in nanocrystalline Cu-30% Zn alloy. ACTA MATERIALIA, 60(8), 3340–3349. https://doi.org/10.1016/j.actamat.2012.02.036

Kulshreshtha, P. K., Youssef, K. M., & Rozgonyi, G. (2012). Nano-indentation: A tool to investigate crack propagation related phase transitions in PV silicon. Solar Energy Materials and Solar Cells, 96(1), 166–172.

Kulshreshtha, P. K., Yoon, Y., Youssef, K. M., Good, E. A., & Rozgonyi, G. (2012). Oxygen precipitation related stress-modified crack propagation in high growth rate Czochralski silicon wafers. Journal of the Electrochemical Society, 159(2), H125–129.

Youssef, K., Yu, X. G., Seacrist, M., & Rozgonyi, G. (2012). Understanding the effect of impurities and grain boundaries on mechanical behavior of Si via nanoindentation of (110)/(100) direct Si bonded wafers. Journal of Materials Research, 27(1), 349–355.

Wu, X. L., Youssef, K. M., Koch, C. C., Mathaudhu, S. N., Kecskes, L. J., & Zhu, Y. T. (2011). Deformation twinning in a nanocrystalline hcp Mg alloy. SCRIPTA MATERIALIA, 64(3), 213–216. https://doi.org/10.1016/j.scriptamat.2010.10.024

Bahmanpour, H., Kauffmann, A., Khoshkhoo, M. S., Youssef, K. M., Mula, S., Freudenberger, J., … Koch, C. C. (2011). Effect of stacking fault energy on deformation behavior of cryo-rolled copper and copper alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 529, 230–236. https://doi.org/10.1016/j.msea.2011.09.022

Youssef, K., Sakaliyska, M., Bahmanpour, H., Scattergood, R., & Koch, C. (2011). Effect of stacking fault energy on mechanical behavior of bulk nanocrystalline Cu and Cu alloys. ACTA MATERIALIA, 59(14), 5758–5764. https://doi.org/10.1016/j.actamat.2011.05.052

Youssef, K. M., Wang, Y. B., Liao, X. Z., Mathaudhu, S. N., Kecskes, L. J., Zhu, Y. T., & Koch, C. C. (2011). High hardness in a nanocrystalline Mg97Y2Zn1 alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 528(25-26), 7494–7499. https://doi.org/10.1016/j.msea.2011.06.017

Bahmanpour, H., Youssef, K. M., Scattergood, R. O., & Koch, C. C. (2011). Mechanical behavior of bulk nanocrystalline copper alloys produced by high energy ball milling. JOURNAL OF MATERIALS SCIENCE, 46(19), 6316–6322. https://doi.org/10.1007/s10853-011-5312-3

Beltran, B. J., Amatya, D. M., Youssef, M., Jones, M., Callahan, T. J., Skaggs, R. W., & Nettles, J. E. (2010). Impacts of Fertilization on Water Quality of a Drained Pine Plantation: A Worst Case Scenario. JOURNAL OF ENVIRONMENTAL QUALITY, 39(1), 293–303. https://doi.org/10.2134/jeq2008.0506

Koch, C. C., Scattergood, R. O., Youssef, K. M., Chan, E., & Zhu, Y. T. (2010, September). Nanostructured materials by mechanical alloying: new results on property enhancement. JOURNAL OF MATERIALS SCIENCE, Vol. 45, pp. 4725–4732. https://doi.org/10.1007/s10853-010-4252-7

Gollapudi, S., Rajulapati, K. V., Charit, I., Youssef, K. M., Koch, C. C., Scattergood, R. O., & Murty, K. L. (2010). Understanding creep in nanocrystalline materials. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 63(2-3), 373–378. https://doi.org/10.1007/s12666-010-0050-9

Yu, X., Lu, J., Youssef, K., & Rozgonyi, G. (2009). Proximity gettering of Cu at a (110)/(001) grain boundary interface formed by direct silicon bonding. Applied Physics Letters, 94(22).

Youssef, K. M., Koch, C. C., & Fedkiw, P. S. (2008). Influence of pulse plating parameters on the synthesis and preferred orientation of nanocrystalline zinc from zinc sulfate electrolytes. ELECTROCHIMICA ACTA, 54(2), 677–683. https://doi.org/10.1016/j.electacta.2008.07.048

Youssef, K. M., Scattergood, R. O., Murty, K. L., & Koch, C. C. (2006). Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility. SCRIPTA MATERIALIA, 54(2), 251–256. https://doi.org/10.1016/j.scriptamat.2005.09.028

Koch, C. C., Youssef, K. M., Scattergood, R. O., & Murty, K. L. (2005). Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys. Advanced Engineering Materials, 7(9), 787–794. https://doi.org/10.1002/adern.200500094

Zhang, D. L., Raynova, S., Koch, C. C., Scattergood, R. O., & Youssef, K. M. (2005, November 25). Consolidation of a Cu-2.5 vol.% Al2O3 powder using high energy mechanical milling. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 410, pp. 375–380. https://doi.org/10.1016/j.msea.2005.08.109

Cheng, S., Ma, E., Wang, Y. M., Kecskes, L. J., Youssef, K. M., Koch, C. C., … Han, K. (2005). Tensile properties of in situ consolidated nanocrystalline Cu. ACTA MATERIALIA, 53(5), 1521–1533. https://doi.org/10.1016/j.actamat.2004.12.005

Youssef, K. M., Scattergood, R. O., Murty, K. L., Horton, J. A., & Koch, C. C. (2005). Ultrahigh strength and high ductility of bulk nanocrystalline copper. APPLIED PHYSICS LETTERS, 87(9). https://doi.org/10.1063/1.2034122

Youssef, K. M. S., Koch, C. C., & Fedkiw, P. S. (2004). Improved corrosion behavior of nanocrystalline zinc produced by pulse-current electrodeposition. CORROSION SCIENCE, 46(1), 51–64. https://doi.org/10.1016/S0010-938X(03)00142-2

Youssef, K. M. S., Koch, C. C., & Fedkiw, P. S. (2004). Influence of additives and pulse electrodeposition parameters on production of nanocrystalline zinc from zinc chloride electrolytes. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 151(2), C103–C111. https://doi.org/10.1149/1.1636739

Youssef, K. M., Scattergood, R. O., Murty, K. L., & Koch, C. C. (2004). Ultratough nanocrystalline copper with a narrow grain size distribution. APPLIED PHYSICS LETTERS, 85(6), 929–931. https://doi.org/10.1063/1.1779342