2010 journal article

Deposition of palladium catalyzed copper films by the displacement of two immiscible supercritical phases and subsequent reaction

JOURNAL OF MATERIALS CHEMISTRY, 20(19), 3973–3978.

By: J. Kim n & R. Carbonell n

Source: Web Of Science
Added: August 6, 2018

2010 journal article

Ultrathin Cross-Linked Perfluoropolyether Film Coatings from Liquid CO2 and Subsequent UV Curing

CHEMISTRY OF MATERIALS, 22(8), 2411–2413.

By: J. Kim n, J. Rolland*, R. Carbonell n & J. DeSimone n

Source: Web Of Science
Added: August 6, 2018

2009 journal article

Complex Effects of the Sweep Fluid on Solid-State Polymerization: Poly(bisphenol A carbonate) in Supercritical Carbon Dioxide

MACROMOLECULES, 42(7), 2472–2479.

By: J. Kim n, L. Dong n, D. Kiserow n & G. Roberts n

UN Sustainable Development Goal Categories
Source: Web Of Science
Added: August 6, 2018

2008 journal article

Characterization of Pd/gamma-Al2O3 Catalysts Prepared Using [Pd(hfac)(2)] in Liquid CO2

TOPICS IN CATALYSIS, 49(3-4), 178–186.

By: M. Kelly n, J. Kim n, G. Roberts n & H. Lamb n

author keywords: Palladium-alumina catalysts; Palladium hexafluoroacetylacetonate; Catalyst preparation; CO pulse chemisorption; Diffuse-reflectance infrared spectroscopy; X-ray absorption fine structure spectroscopy
Source: Web Of Science
Added: August 6, 2018

2008 journal article

Spectroscopic analysis of poly(bisphenol A carbonate) using high resolution C-13 and H-1 NMR

POLYMER, 49(2), 394–404.

By: J. Kim n, H. Gracz n, G. Roberts n & D. Kiserow n

author keywords: poly(bisphenol A carbonate); end-group analysis; NMR spectroscopy
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Source: Web Of Science
Added: August 6, 2018

2007 journal article

Deposition of poly[2-(perfluorooctyl)ethyl acrylate] on silicon wafers by the displacement of two immiscible supercritical phases (DISP)

JOURNAL OF SUPERCRITICAL FLUIDS, 43(1), 139–149.

By: J. Kim n, J. McClain n & R. Carbonell n

author keywords: supercritical carbon dioxide; supercritical helium; immiscibility; coating; poly[2-(perfluorooctyl)ethyl acrylate]; thin fluorinated film
Source: Web Of Science
Added: August 6, 2018

2007 journal article

Hydrothermal oxidation treatment of solid particles between 250 and 350 degrees C: Modelling and experiments

JOURNAL OF SUPERCRITICAL FLUIDS, 41(3), 352–360.

By: F. Marias*, F. Mancini*, F. Cansell* & J. Mercadier*

author keywords: hydrothermal oxidation; modelling; reactor; experimental device; solid particles; particle size distribution
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Source: Web Of Science
Added: August 6, 2018

2007 journal article

Surface properties of poly[2-(perfluorooctyl)ethyl acrylate] deposited from liquid CO2 high-pressure free meniscus coating

MACROMOLECULES, 40(3), 588–597.

By: J. Kim n, K. Efimenko n, J. Genzer n & R. Carbonell n

UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2007 journal article

Titanium complexes: A possible catalyst for controlled radical polymerization

Macromolecular Research, 15(1), 31–38.

By: Y. Kwark*, J. Kim* & B. Novak n

Source: NC State University Libraries
Added: August 6, 2018

2006 journal article

Deposition of small organic molecules by the displacement of two immiscible supercritical phases

LANGMUIR, 22(5), 2117–2129.

By: J. Kim n & R. Carbonell n

TL;DR: Estimates of characteristic times for diffusion and nucleation indicate that DISP is a diffusion-limited process, and films deposited from scCO2 by DISP were much thicker, more uniform, and exhibited much fewer drying defects and lower RMS roughness compared with films from the organic solvents. (via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018

2006 journal article

Ultrathin film deposition by liquid CO2 free meniscus coating-uniformity and morphology

LANGMUIR, 22(2), 642–657.

By: J. Kim n, B. Novick n, J. DeSimone n & R. Carbonell n

MeSH headings : Carbon Dioxide / chemistry; Coated Materials, Biocompatible / chemistry; Freezing; Materials Testing; Microscopy, Atomic Force; Silicon / chemistry; Solvents / chemistry; Sucrose / analogs & derivatives; Sucrose / chemistry; Surface Properties
TL;DR: The film thickness and morphology of SOA films deposited from 1-CO2 hFMC were compared to those deposited from toluene and acetone under normal dip coating and were much thinner, more uniform, and exhibited much fewer drying defects and lower RMS roughness. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Source: Web Of Science
Added: August 6, 2018

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.