@article{ganesh_khawaja_ozdemir_guvenc_nomoto_ide_2023, title={Propagation Measurements and Coverage Analysis for mmWave and Sub-THz Frequency Bands with Transparent Reflectors}, ISSN={["2577-2465"]}, DOI={10.1109/VTC2023-Spring57618.2023.10200244}, abstractNote={The emerging 5G and future 6G technologies are envisioned to provide higher bandwidths and coverage using millimeter wave (mmWave) and sub-Terahertz (THz) frequency bands. The growing demand for higher data rates using these bands can be addressed by overcoming high path loss, especially for non-line-of-sight (NLOS) scenarios. In this work, we investigate the use of passive transparent reflectors to improve signal coverage in an NLOS indoor scenario. Measurements are conducted to characterize the maximum reflectivity property of the transparent reflector using channel sounder equipment from NI. Flat and curved reflectors, each with a size of 16 inches by 16 inches, are used to study coverage improvements with different reflector shapes and orientations. The measurement results using passive metallic reflectors are also compared with the ray-tracing-based simulations, to further corroborate our inferences. The analysis reveals that the transparent reflector outperforms the metal reflector and increases the radio propagation coverage in all three frequencies of interest: 28 GHz, 39 GHz, and 120 GHz. Using transparent reflectors, there is an increase in peak received power that is greater than 5 dB for certain scenarios compared to metallic reflectors when used in flat mode, and greater than 3 dB when used in curved (convex) mode.}, journal={2023 IEEE 97TH VEHICULAR TECHNOLOGY CONFERENCE, VTC2023-SPRING}, author={Ganesh, Ashwini P. and Khawaja, Wahab and Ozdemir, Ozgur and Guvenc, Ismail and Nomoto, Hiroyuki and Ide, Yasuaki}, year={2023} }
 @article{anjinappa_ganesh_ozdemir_ridenour_khawaja_guvenc_nomoto_ide_2022, title={Indoor Propagation Measurements with Transparent Reflectors at 28/39/120/144 GHz}, ISSN={["2164-7038"]}, DOI={10.1109/ICCWorkshops53468.2022.9814550}, abstractNote={One of the critical challenges of operating with the terahertz or millimeter-wave wireless networks is the necessity of at least a strong non-line-of-sight (NLoS) reflected path to form a stable link. Recent studies have shown that an economical way of enhancing/improving these NLoS links is by using passive metal-lic reflectors that provide strong reflections. However, despite its inherent radio advantage, metals can dramatically influence the landscape's appearance - especially the indoor environment. A conceptual view of escaping this is by using transparent reflectors. In this work, for the very first time, we evaluate the wireless propagation characteristics of passive transparent reflectors in an indoor environment at 28 GHz, 39 GHz, 120 GHz, and 144 GHz bands. In particular, we investigate the penetration loss and the reflection characteristics at different frequencies and compare them against the other common indoor materials such as ceiling tile, clear glass, drywall, plywood, and metal. The measurement results suggest that the transparent reflector, apart from an obvious advantage of transparency, has a higher penetration loss than the common indoor materials (excluding metal) and performs similarly to metal in terms of reflection. Our experimental results directly translate to better reflection performance and preserving the radio waves within the environ-ment than common indoor materials, with potential applications in controlled wireless communication.}, journal={2022 IEEE INTERNATIONAL CONFERENCE ON COMMUNICATIONS WORKSHOPS (ICC WORKSHOPS)}, author={Anjinappa, Chethan K. and Ganesh, Ashwini P. and Ozdemir, Ozgur and Ridenour, Kris and Khawaja, Wahab and Guvenc, Ismail and Nomoto, Hiroyuki and Ide, Yasuaki}, year={2022}, pages={1118–1123} }