Behnam Pourdeyhimi

Characterizing nonwoven materials via realistic microstructural modeling

SEPARATION AND PURIFICATION TECHNOLOGY, 211, 602–609.

Empirical model to simulate morphology of electrospun polycaprolactone mats

JOURNAL OF APPLIED POLYMER SCIENCE.

Hydroentanglement of Polymer Nonwovens 2: Simulation of multiple polymer fibers and prediction of entanglement

POLYMER, 164, 205–216.

Hydroentanglement of polymer nonwovens. 1: Experimental and theoretical/numerical framework

POLYMER, 164, 191–204.

Industrial-scale fabrication of an osteogenic and antibacterial PLA/silver-loaded calcium phosphate composite with significantly reduced cytotoxicity

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 107(4), 900–910.

Influence of sea polymer removal on sound absorption behavior of islands-in-the-sea spunbonded nonwovens

TEXTILE RESEARCH JOURNAL, 89(12), 2444–2455.

Penetration of liquid droplets into hydrophobic fibrous materials under enhanced gravity

JOURNAL OF APPLIED PHYSICS, 125(14).

The role of staple fiber length on the performance of carded, hydroentangled nonwovens produced with splittable fibers

JOURNAL OF ENGINEERED FIBERS AND FABRICS, 14.

A new approach to modeling liquid intrusion in hydrophobic fibrous membranes with heterogeneous wettabilities

In COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (Vol. 558, pp. 154–163).

Droplet Mobility on Hydrophobic Fibrous Coatings Comprising Orthogonal Fibers

LANGMUIR, 34(41), 12488–12499.

Effects of electrospinning conditions on microstructural properties of polystyrene fibrous materials

JOURNAL OF APPLIED PHYSICS, 124(23).

Electrospun mat of poly(vinyl alcohol)/graphene oxide for superior electrolyte performance

ACS Applied Materials & Interfaces, 10(9), 7927–7934.

Point-bonded polymer nonwovens and their rupture in stretching

Polymer, 146, 209–221.

Polymer adhesion in heat-treated nonwovens

Journal of Applied Polymer Science, 135(15).

Adhesion of blended polymer films

Polymer, 112, 92–101.

Creation and evaluation of new porcine model for investigation of treatments of surgical site infection

Tissue Engineering. Part C, Methods, 23(11), 795–803.

Dynamic adsorption of ammonia: Apparatus, testing conditions, and adsorption capacities

Measurement Science & Technology, 28(5).

Effect of annealing on charging properties of electret fibers

Journal of the Textile Institute, 108(6), 987–991.

Heavy metal adsorption on solution-blown biopolymer nanofiber membranes

Journal of Membrane Science, 530, 250–263.

High-throughput fabrication method for producing a silver-nanoparticles-doped nanoclay polymer composite with novel synergistic antibacterial effects at the material interface

ACS Applied Materials & Interfaces, 9(25), 21105–21115.

Highly conductive polypropylene-graphene nonwoven composite via interface engineering

Langmuir, 33(30), 7452–7458.

Ibuprofen loaded pla nanofibrous scaffolds increase proliferation of human skin cells in vitro and promote healing of full thickness incision wounds in vivo

Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 105(2), 327–339.

Investigating activation of carbon fiber nonwovens for use as supercapacitor electrodes

Journal of the Textile Institute, 108(9), 1528–1536.

Meltblown polymer fabrics as candidate scaffolds for rotator cuff tendon tissue engineering

Tissue Engineering. Part A, 23(17-18), 958–967.

Notches in fibrous materials: micro-mechanisms of deformation and damage

In XXVII INTERNATIONAL CONFERENCE: MATHEMATICAL AND COMPUTER SIMULATION IN MECHANICS OF SOLIDS AND STRUCTURES - FUNDAMENTALS OF STATIC AND DYNAMIC FRACTURE (MCM 2017) (Vol. 6, pp. 168–173).

Nylon-graphene composite nonwovens as monolithic conductive or capacitive fabrics

ACS Applied Materials & Interfaces, 9(9), 8308–8316.

Structures and properties of hydroentangled nonwovens: effect of number of manifolds

Journal of the Textile Institute, 108(3), 301–313.

The charging and stability of electret filters

Fibrous Filter Media, 95–121.

Computational fluid dynamics simulations and experiments of meltblown fibrous media: new die designs to enhance fiber attenuation and filtration quality

Industrial & Engineering Chemistry Research, 55(7), 2049–2058.

Creating tissues from textiles: Scalable nonwoven manufacturing techniques for fabrication of tissue engineering scaffolds

Biomedical Materials, 11(1).

Evaluation of silver ion-releasing scaffolds in a 3D coculture system of MRSA and human adipose-derived stem cells for their potential use in treatment or prevention of osteomyelitis

Tissue Engineering. Part A, 22(21-22), 1258–1263.

Fabrication micro-meltblown filtration media using parallel plate die design

Journal of Applied Polymer Science, 133(7).

Fabrication of novel high surface area mushroom gilled fibers and their effects on human adipose derived stem cells under pulsatile fluid flow for tissue engineering. applications

Acta Biomaterialia, 36, 220–230.

Hybrid adsorbent nonwoven structures: a review of current technologies

Journal of Materials Science.

Industrial-scale solution blowing of soy protein nanofibers

Industrial & Engineering Chemistry Research, 55(1), 323–333.

Nonwovens modelling: A review of finite-element strategies

Journal of the Textile Institute.

Numerical modeling and experimental study of solution-blown nonwovens formed on a rotating drum

Polymer, 105, 255–263.

Numerical prediction of the effect of uptake velocity on three-dimensional structure, porosity and permeability of meltblown nonwoven laydown

Polymer, 85, 19–27.

Physical microfabrication of shape-memory polymer systems via bicomponent fiber spinning

Macromolecular Rapid Communications, 37(22), 1837–1843.

Preparation of pseudocapacitor electrodes via electrodeposition of polyaniline on nonwoven carbon fiber fabrics

Journal of Applied Polymer Science, 133(16).

Process-structure-property relationship of melt spun poly(lactic acid) fibers produced in the spunbond process

Journal of Applied Polymer Science, 133(47).

Reducing diffusion limitations in Ion exchange grafted membranes using high surface area nonwovens

Journal of Membrane Science, 514, 53–64.

Sintering of compound nonwovens by forced convection of hot air

International Journal of Heat and Mass Transfer, 101, 327–335.

Sound absorption analysis of thermally bonded high-loft nonwovens

Textile Research Journal, 86(8), 837–847.

Surface crystallinity of meltspun isotactic polypropylene filaments

Macromolecular Research, 24(1), 25–30.

An analytical approach to predict pressure drop and collection efficiency of dust-load pleated filters

Separation and Purification Technology, 161, 80–87.

Application of solution-blown 20-50 nm nanofibers in filtration of nanoparticles: The efficient van der Waals collectors

Journal of Membrane Science, 485, 132–150.

Biodegradable and biocompatible soy protein/polymer/adhesive sticky nano-textured interfacial membranes for prevention of esca fungi invasion into pruning cuts and wounds of vines

Journal of Materials Chemistry B, 3(10), 2147–2162.

Deformation and damage of thermally bonded nonwoven networks

Mechanics of Advanced Materials: Analysis of Properties and Performance, 181–199.

Electrostatic capture efficiency enhancement of polypropylene electret filters with barium titanate

Aerosol Science and Technology, 49(8), 666–673.

Impact of aqueous suspension drops onto non-wettable porous membranes: Hydrodynamic focusing and penetration of nanoparticles

Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 467, 31–45.

Measuring electrostatic properties of fibrous materials: A review and a modified surface potential decay technique

Journal of Electrostatics.

Mechanical analysis of bi-component-fibre nonwovens: Finite-element strategy

Composites. Part B, Engineering, 68, 327–335.

Reactive compatibilization of polyamide 6/polyethylene nonwoven based thermoplastic composites

European Polymer Journal, 63, 194–206.

Theoretical and experimental investigation of physical mechanisms responsible for polymer nanofiber formation in solution blowing

Polymer, 56, 452–463.

Translating textiles to tissue engineering: Creation and evaluation of microporous, biocompatible, degradable scaffolds using industry relevant manufacturing approaches and human adipose derived stem cells

Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 103(5), 1050–1058.

Aerosol filtration properties of nucleating agent containing electret filters

Polymer Engineering and Science, 54(7), 1533–1539.

Basis weight uniformity analysis in nonwovens

Journal of the Textile Institute, 105(4), 444–453.

Interconnected, microporous hollow fibers for tissue engineering: Commercially relevant, industry standard scale-up manufacturing

Journal of Biomedical Materials Research. Part A.

Large deformation of thermally bonded random fibrous networks: microstructural changes and damage

Journal of Materials Science, 49(11), 4081–4092.

Mechanical behaviour of nonwovens: Analysis of effect of manufacturing parameters with parametric computational model

Computational Materials Science, 94, 8–16.

Meltblown fiber mats and their tensile strength

Polymer, 55(16), 4241–4247.

Modeling performance of multi-component fibrous insulations against conductive and radiative heat transfer

International Journal of Heat and Mass Transfer, 71, 341–348.

Modeling service life of pleated filters exposed to poly-dispersed aerosols

Powder Technology, 266, 79–89.

Novel, silver-ion-releasing nanofibrous scaffolds exhibit excellent antibacterial efficacy without the use of silver nanoparticles

Acta Biomaterialia, 10(5), 2096–2104.

Numerical analysis of progressive damage in nonwoven fibrous networks under tension

International Journal of Solids and Structures, 51(9), 1670–1685.

Skin tissue engineering for the infected wound site: Biodegradable PLA nanofibers and a novel approach for silver ion release evaluated in a 3D coculture system of keratinocytes and Staphylococcus aureus

Tissue Engineering. Part C, Methods, 20(10), 790–797.

Utility of polyvinyl alcohol fiber-based needle punched nonwoven fabric as potential reinforcement in cementitious composites

Journal of Composite Materials, 48(25), 3129–3140.

Acoustical absorptive properties of spunbonded nonwovens made from islands-in-the-sea bicomponent filaments

Journal of the Textile Institute, 104(4), 438–445.

Antibacterial activity of photocatalytic electrospun titania nanofiber mats and solution-blown soy protein nanofiber mats decorated with silver nanoparticles

Catalysis Communications, 34, 35–40.

Biopolymer-based nanofiber mats and their mechanical characterization

Industrial & Engineering Chemistry Research, 52(43), 15104–15113.

Blowing drops off a filament

Soft Matter, 9(26), 6053–6071.

Catalytic graphitization and formation of macroporous-activated carbon nanofibers from salt-induced and H2S-treated polyacrylonitrile

Journal of Materials Science, 48(22), 7783–7790.

Characterisation and numerical modelling of complex deformation behaviour in thermally bonded nonwovens

Computational Materials Science, 71, 165–171.

Effect of DMDBS (3: 2, 4-bis(3,4-dimethyldibenzylidene) sorbitol) and NA11 (sodium 2,2-methylene-bis(4,6-di-tertbutylphenyl)-phosphate) on electret properties of polypropylene filaments

Journal of Applied Polymer Science, 130(3), 2068–2075.

Effects of surfactants on the microstructures of electrospun polyacrylonitrile nanofibers and their carbonized analogs

Journal of Applied Polymer Science, 130(5), 3726–3735.

Fabrication of nanofiber meltblown membranes and their filtration properties

Journal of Membrane Science, 427, 336–344.

Improving electret properties of PP filaments with barium titanate

Journal of Electrostatics, 71(1), 41–47.

Meso-scale deformation and damage in thermally bonded nonwovens

Journal of Materials Science, 48(6), 2334–2345.

Modelling and experimental studies of air permeability of nonuniform nonwoven fibrous porous media

Fibers and Polymers, 14(3), 494–499.

Polymeric systems incorporating plant viral nanoparticles for tailored release of therapeutics

Advanced Healthcare Materials, 2(7), 1001–1007.

Prediction of angular and mass distribution in meltblown polymer lay-down

Polymer, 54(2), 860–872.

Preservation of cell viability and protein conformation on immobilization within nanofibers via electrospinning functionalized yeast

ACS Applied Materials & Interfaces, 5(19), 9349–9354.

Supersonic nanoblowing: a new ultra-stiff phase of nylon 6 in 20-50 nm confinement

Journal of Materials Chemistry C, 1(21), 3491–3498.

Synthesis and characterization of silver/lithium cobalt oxide (Ag/LiCoO2) nanofibers via sol-gel electrospinning

Journal of Physics and Chemistry of Solids, 74(11), 1538–1545.

Synthesis of mixed ceramic MgxZn1-xO nanofibers via Mg2+ doping using sol-gel electrospinning

Langmuir, 29(12), 4159–4166.

Two-stage desorption-controlled release of fluorescent dye and vitamin from solution-blown and electrospun nanofiber mats containing porogens

Molecular Pharmaceutics, 10(12), 4509–4526.

Ultrastretchable fibers with metallic conductivity using a liquid metal alloy core

Advanced Functional Materials, 23(18), 2308–2314.

Dependence of the liquid absorption behavior of nonwovens on their material and structural characteristics: Modeling and experiments

Journal of Applied Polymer Science, 126(3), 1053–1060.

Drop impacts on electrospun nanofiber membranes

Soft Matter, 8(14), 3957–3970.

Influence of polymer type, composition, and interface on the structural and mechanical properties of core/sheath type bicomponent nonwoven fibers

Journal of Materials Science, 47(16), 5955–5969.

Numerical modelling of damage initiation in low-density thermally bonded nonwovens

In Computational Materials Science (Vol. 64, pp. 112–115).

Release profiles of tricalcium phosphate nanoparticles from Poly(L-lactic acid) electrospun scaffolds with single component, core-sheath, or porous fiber morphologies: Effects on hASC viability and osteogenic differentiation

Macromolecular Bioscience, 12(7), 893–900.

Selective permeation of cross-linked polyelectrolyte and polyelectrolyte-filled nonwoven membranes

Journal of Applied Polymer Science, 123(1), 227–233.

Stress-strain dependence for soy-protein nanofiber mats

Journal of Applied Physics, 111(4).

Surface modifications of polypropylene with nonylphenol ethoxylates melt additives

Polymer Engineering and Science, 52(9), 1920–1927.

Templating quantum dot to phase-transformed electrospun TiO2 nanofibers for enhanced photo-excited electron injection

ACS Applied Materials & Interfaces, 4(8), 3837–3845.

Three-dimensional structural characterization of nonwoven fabrics

Microscopy and Microanalysis, 18(6), 1368–1379.

Aerosol filtration properties of PA6/PE islands-in-the-sea bicomponent spunbond web fibrillated by high-pressure water jets

Journal of Materials Science, 46(17), 5761–5767.

Analytical expressions for predicting performance of aerosol filtration media made up of trilobal fibers

Journal of Hazardous Materials, 186(2-3), 1503–1512.

Finite element modelling of thermally bonded bicomponent fibre nonwovens: Tensile behaviour

In Computational Materials Science (Vol. 50, pp. 1286–1291).

Laser ablation imparts controlled micro-scale pores in electrospun scaffolds for tissue engineering applications

Annals of Biomedical Engineering, 39(12), 3021–3030.

Mammalian cell viability in electrospun composite nanofiber structures

Macromolecular Bioscience, 11(10), 1346–1356.

Meltblowing: Multiple polymer jets and fiber-size distribution and lay-down patterns

Polymer, 52(13), 2929–2938.

Modeling instantaneous pressure drop of pleated thin filter media during dust loading

Chemical Engineering Science, 66(18), 4036–4046.

A Monte Carlo simulation of radiative heat through fibrous media: Effects of boundary conditions and microstructural parameters

International Journal of Thermal Sciences, 50(6), 935–941.

Polypropylene surface modification with stearyl alcohol ethoxylates to enhance wettability

Journal of Applied Polymer Science, 121(3), 1335–1347.

Scaffolds for drug delivery, part I: Electrospun porous poly(lactic acid) and poly(lactic acid)/poly(ethylene oxide) hybrid scaffolds

Journal of Materials Science, 46(9), 2874–2881.

Solution blowing of soy protein fibers

Biomacromolecules, 12(6), 2357–2363.

Structure and tensile properties of nanoclay-polypropylene fibers produced by melt spinning

Journal of Applied Polymer Science, 121(1), 410–419.

Synthesis and characterization of polymer-filled nonwoven membranes

Journal of Applied Polymer Science, 119(5), 2568–2575.

Web fabrication and characterization of unique winged shaped, area-enhanced fibers via a bicomponent spunbond process

Journal of Materials Science, 46(10), 3252–3257.

Analytical expressions for predicting capture efficiency of bimodal fibrous filters

Journal of Aerosol Science, 41(3), 295–305.

Boehmite nanoparticles incorporated electrospun nylon-6 nanofiber web for new electret filter media

Macromolecular Research, 18(9), 884–890.

Chemical protection performance of polystyrene sulfonic acid-filled polypropylene nonwoven membranes

Journal of Membrane Science, 362(1-2), 137–142.

Compressional and recovery behaviour of highloft nonwovens

Indian Journal of Fibre & Textile Research, 35(4), 303–309.

Focused ion beam characterization of bicomponent polymer fibers

Microscopy and Microanalysis, 16(3), 282–290.

In situ collagen polymerization of layered cell-seeded electrospun scaffolds for bone tissue engineering applications

Tissue Engineering. Part C, Methods, 16(5), 1095–1105.

Influence of fiber orientation distribution on performance of aerosol filtration media

Chemical Engineering Science, 65(18), 5285–5293.

Melt spun microporous fibers using poly(lactic acid) and sulfonated copolyester blends for tissue engineering applications

Journal of Applied Polymer Science, 117(6), 3350–3361.

Meltblowing: I-basic physical mechanisms and threadline model

Journal of Applied Physics, 108(3).

Meltblowing: II-linear and nonlinear waves on viscoelastic polymer jets

Journal of Applied Physics, 108(3).

Modeling the role of microstructural parameters in radiative heat transfer through disordered fibrous media

International Journal of Heat and Mass Transfer, 53(21-22), 4629–4637.

Reverse phase HPLC analysis of commercial surfactants used as melt additives

Tenside, Surfactants, Detergents, 47(3), 142–150.

Structure-property relationships of polymer-filled nonwoven membranes for chemical protection applications

Journal of Membrane Science, 361(1-2), 63–70.

Three-dimensional analysis of segmented pie bicomponent nonwovens

Journal of the Textile Institute, 101(9), 773–787.

electrospun nanofibers with associative polymer-surfactant systems

Macromolecules, 43(18), 7650–7656.

The production of 100/400 nm inner/outer diameter carbon tubes by solution blowing and carbonization of core-shell nanofibers

Carbon, 48(12), 3575–3578.

Analytical expressions for predicting permeability of bimodal fibrous porous media

Chemical Engineering Science, 64(6), 1154–1159.

Crystallization behavior of elastomeric block copolymers: Thermoplastic polyurethane and polyether-block-amide

Journal of Applied Polymer Science, 111(3), 1246–1256.

Durable nonwoven fabrics via fracturing bicomponent Islands-in-the-Sea filaments

AATCC Review, 9(2), 41–47.

Electrospun composite poly(L-lactic acid)/tricalcium phosphate scaffolds induce proliferation and osteogenic differentiation of human adipose-derived stem cells

Biomedical Materials, 4(3).

Fiber-based nano drug delivery systems (NDDS)

Flexible, durable printed electrical circuits

Journal of the Textile Institute, 100(1), 1–9.

High surface area nonwovens via fibrillating spunbonded nonwovens comprising Islands-in-the-Sea bicomponent filaments: structure-process-property relationships

Journal of Materials Science, 44(21), 5926–5934.

Melt-blowing thermoplastic polyurethane and polyether-block-amide elastomers: Effect of processing conditions and crystallization on web properties

Polymer Engineering and Science, 49(7), 1340–1349.

An investigation of the radiative heat transfer through nonwoven fibrous materials

Journal of Engineered Fibers and Fabrics, 4(1), 9–15.

A realistic modeling of fluid infiltration in thin fibrous sheets

Journal of Applied Physics, 105(11).

A study on compression-induced morphological changes of nonwoven fibrous materials

Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 337(1-3), 173–179.

Associative polymer facilitated electrospinning of nanofibers

Macromolecules, 41(12), 4275–4283.

Blending polypropylene with glycidyl methacrylate-containing polymer to improve adhesion to elastomers

Polymer International, 57(8), 975–981.

Case studies of air filtration at microscales: Micro- and nanofiber media

Journal of Engineered Fibers and Fabrics, 3(2).

Comments on the paper entitled "Splitting of Islands-in-the-Sea Fibers (PA6/COPET) during hydroentangling of nonwovens"

Journal of Engineered Fibers and Fabrics, 3(1), 32–35.

Lightweight high-tensile, high-tear strength bicomponent nonwoven fabrics

Nonwoven fabric active electrodes for biopotential measurement during normal daily activity

IEEE Transactions on Biomedical Engineering, 55(1), 188–195.

On the pressure drop prediction of filter media composed of fibers with bimodal diameter distributions

Powder Technology, 181(1), 89–95.

On the use of vector antennas embedded on fabric as frequency selective surfaces

In 2008 IEEE International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting (pp. 1208–1211). [Piscataway, NJ]: IEEE.

Potentials and challenges in jetting microdroplets onto nonwoven fabrics

Journal of the Textile Institute, 99(6), 581–589.

Simulating liquid flow through virtual glass fiber mats

Textile Research Journal, 78(10), 903–910.

System and method for reducing jet streaks in hydroentangled fibers

Treatment of raw cotton fibers with cellulases for nonwoven fabrics

Textile Research Journal, 78(6), 540–548.

Utility of nonwovens in the production of integrated electrical circuits via printing conductive inks

Journal of the Textile Institute, 99(1), 37–45.

The influence of forming surface on the vacuum pressure in hydroentangling process

Journal of the Textile Institute, 99(5), 407–414.

A note on an optical method to evaluate fiber dispersion in wet-laid nonwoven process

Textile Research Journal, 78(6), 518–523.

3-D simulation and analysis of nonwoven structures

Journal of Engineered Fibers and Fabrics, 1(2), 47–52.

Composite hydroentangling nozzle strip and method for producing nonwoven fabrics therewith

Washington, DC: U.S. Patent and Trademark Office.

Effects of oxygen plasma treatment on adipose-derived human mesenchymal stem cell adherence to poly(L-lactic acid) scaffolds

Journal of Biomaterials Science, Polymer Edition, 18(11), 1387–1400.

Future directions in nonwovens technologies

In Beltwide Cotton Conferences. Proceedings.

Geometrical modeling of fibrous materials under compression

Journal of Applied Physics, 102(7).

High performance nonwovens

In Beltwide Cotton Conferences. Proceedings.

High strength nylon micro- and nanofiber based nonwovens via spunbonding

Journal of Applied Polymer Science, 104(5), 3434–3442.

Hydroentangling jet strip device defining an orifice

Washington, DC: U.S. Patent and Trademark Office.

On the pressure drop modeling of monofilament-woven fabrics

Chemical Engineering Science, 62(17), 4817–4821.

Opportunities for cotton

In Beltwide Cotton Conferences. Proceedings.

Predicting inlet roundness of hydroentangling nozzles via CFD simulations

Journal of Micromechanics and Microengineering, 17(5), N31.

Pretreatment of bleached cotton fibers with whole and Monocomponent cellulases for nonwoven applications

Textile Research Journal, 77(10), 734–742.

Simulating permeability of 3-D calendered fibrous structures

Chemical Engineering Science, 62(22), 6285–6296.

Simulating through-plane permeability of fibrous materials with different fiber lengths

Modelling and Simulation in Materials Science and Engineering, 15(8), 855–868.

Strength optimization of thermally bonded spunbond nonwovens

Journal of Engineered Fibers and Fabrics, 2(1), 38–48.

A novel nozzle design for producing hydroentangled nonwoven materials with minimum jet-mark defects

Journal of Materials Science, 42(15), 6161–6170.

A simulation of un-steady-state filtration via nanofiber media at reduced operating pressures

Journal of Aerosol Science, 38(5), 550–571.

A study on the role of hydroentangling waterjets in reorienting fibers in nonwoven fabrics

Journal of Materials Science, 42, 6161–6170.

Calculating mass transfer from vertical wet fabrics using a free convection heat transfer correlation

Heat and Mass Transfer, 42(9), 767–769.

Grading of yarn appearance using image analysis and an artificial intelligence technique

Textile Research Journal, 76(3), 187–196.

Hydroentangling fabrics for improving abrasion resistance

Journal of the Textile Institute, 97(5), 435–440.

Modeling mechanical properties of thermally bonded nonwovens

New innovations in engineered fabrics

In Innovations in medical, protective, and technical textiles : AATCC symposium ; February 1 - 2, 2006, Embassy Suites Hotel, Cary, North Carolina. Research Triangle Park, NC: AATCC,

Nonwoven structure definition

Nonwoven structure simulation and definition

Numerical simulation of the formation of constricted waterjets in capillary nozzles: Effects of nozzle geometry

Chemical Engineering Research & Design, 84(A3), 231–238.

Photoluminescent fibers and fabrics with high luminance and enhanced mechanical properties

Washington, DC: U.S. Patent and Trademark Office.

Polyether based thermoplastic polyurethane melt blown nonwovens

Journal of Engineered Fibers and Fabrics, 1(1).

Review of thermally point-bonded nonwovens: Materials, processes, and properties

Journal of Applied Polymer Science, 99(5), 2489–2496.

Role of hydroentangling on performance

Role of structure on transport

Role of thermal bonding on performance

Surface modification of fibers & nonwovens with melt additives

Surface modification of fibers & nonwovens with melt additives.

Three-dimensional deep molded structures with enhanced properties

Washington, DC: U.S. Patent and Trademark Office.

A case study of simulating submicron aerosol filtration via lightweight spun-bonded filter media

Chemical Engineering Science, 61(15), 4871–4883.

A note on permeability simulation of multifilament woven fabrics

Chemical Engineering Science, 61(24), 8085–8088.

A study on deterioration of hydroentangling nozzles due to erosion and particle accretion

Chemical Engineering Science, 61(14), 4582–4594.

A study on hydroentangling waterjets and their impact force

Experiments in Fluids, 41(1), 103–113.

2-D and 3-D simulations of nonwovens structures

Aerosol filtration

Development of appearance grading method of cotton yarns for various types of yarns

Research Journal of Textile & Apparel, 9(4), 886–893.

Effect of dilation on the mechanical characterization of vascular prostheses

Fibers and Polymers, 6(1), 49–54.

Effect of yarn appearance on apparent quality of weft knitted fabrics

Journal of the Textile Institute, 96(5), 295–301.

Electro-textiles: Challenges and opportunities

In IECON. Piscataway, N.J.: IEEE.