Works (134)

Updated: April 4th, 2024 12:52

2023 journal article

An ultrathin polymer-derived UHTCs coating on CFRP substrate: Effective electromagnetic wave absorber

COMPOSITES COMMUNICATIONS, 43.

author keywords: Electromagnetic wave absorption; Wide-band absorption; CFRP; Polymer-derived ceramics; High-temperature survivability
Sources: Web Of Science, NC State University Libraries
Added: November 20, 2023

2023 journal article

Impact and wetting of polysilazane droplets on a metal surface

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 677.

By: F. Wang n, T. Ajayi n, K. Vinod n, C. Xu n & T. Fang n

author keywords: Droplet Impact; Polymer; Surface; Weber number; Spread parameter; Polymer derived ceramics
Sources: Web Of Science, NC State University Libraries, ORCID
Added: September 4, 2023

2023 journal article

Polymer-derived SiOC reinforced with core-shell nanophase structure of ZrB2/ZrO2 for excellent and stable high-temperature microwave absorption (up to 900 degrees C)

SCIENTIFIC REPORTS, 13(1).

Sources: Web Of Science, NC State University Libraries
Added: January 30, 2023

2023 article

Structural Electromagnetic Absorber Based on MoS2/PyC-Al2O3 Ceramic Metamaterials

Liu, X., Liu, H., Wu, H., Zhou, Q., Liang, H., Liu, G., … Riedel, R. (2023, April 22). SMALL, Vol. 4.

author keywords: additive manufacturing; mechanical strength; metamaterials; MoS2; PyC-Al2O3; multi-loss mechanism
Sources: Web Of Science, NC State University Libraries
Added: May 9, 2023

2023 journal article

Synthesis and characterization of functionally graded SiC-mullite thermal material

JOURNAL OF SOLID STATE CHEMISTRY, 330.

By: F. Sultana*, N. Yang n, C. Xu n, J. Monroe* & A. El-Ghannam*

author keywords: SiC-mullite composite; In -situ mullite; Liquid phase sintering; Thermal shock resistance; Electrical and thermal properties
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: January 16, 2024

2023 article

The Role of Carbon Content: A Comparison of the Nickel Particle Size and Magnetic Property of Nickel/Polysiloxane-Derived Silicon Oxycarbide

Yang, N., Zhang, X., Reynolds, L., Kumah, D., & Xu, C. (2023, January 24). ADVANCED ENGINEERING MATERIALS, Vol. 1.

Contributors: N. Yang n, X. Zhang n, L. Reynolds n, D. Kumah n & C. Xu n

author keywords: blocking temperatures; nickel nanoparticles; polymer-derived ceramics; silicon oxycarbide; superparamagnetism; uperconducting quantum interference device
Sources: Web Of Science, NC State University Libraries, ORCID
Added: January 25, 2023

2023 article

Vibration-based hidden damage imaging using stereo cameras with digital image correlation

Wang, S., Abbott, T. B., Fong, R.-Y., Xu, C., & Yuan, F.-G. (2023, August 30). STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, Vol. 8.

By: S. Wang n, T. Abbott n, R. Fong n, C. Xu n & F. Yuan n

author keywords: Vibration-based damage detection; digital image correlation; operational deflection shape; continuous wavelet transform; modal curvature; wavelet transform mode shape curvature
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 30, 2023

2022 journal article

Electron beam sintering (EBS) process for Ultra-High Temperature Ceramics (UHTCs) and the comparison with traditional UHTC sintering and metal Electron Beam Melting (EBM) processes

CERAMICS INTERNATIONAL, 48(7), 10174–10186.

author keywords: Electron beam sintering; Electron beam melting; Ultra-high temperature ceramics; Additive manufacturing; Liquid phase sintering
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: April 4, 2022

2022 journal article

Highly electromagnetic transparent ceramic composite made of boron nitride nanotubes and silicon oxynitride via perhydropolysilazane infiltration method

SCIENTIFIC REPORTS, 12(1).

Sources: Web Of Science, NC State University Libraries
Added: September 19, 2022

2022 article

Super-Wideband Electromagnetic Absorbing TiC/SiOC Ceramic/Glass Composites Derived from Polysiloxane and Titanium Isopropoxide with Low Thickness (<1 mm)

Yang, N., Xu, S., Zhang, D., & Xu, C. (2022, December 15). ADVANCED ENGINEERING MATERIALS, Vol. 12.

author keywords: electromagnetic (EMW) absorption; phase separation; polymer-derived ceramics; transition metal carbide; wide-band absorption
Sources: Web Of Science, NC State University Libraries
Added: January 3, 2023

2021 journal article

A Deep Learning Approach in Optical Inspection to Detect Hidden Hardware Trojans and Secure Cybersecurity in Electronics Manufacturing Supply Chains

FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, 7.

By: A. Kulkarni & C. Xu

author keywords: hardware trojan; deep learning; artificial intelligence; printed circuit boards manufacturing; optical inspection; hardware cybersecurity
TL;DR: A deep learning approach to optically detect hidden hardware trojans in the manufacturing and assembly phase of printed circuit boards to secure electronic supply chains and provide a new consideration of hardware trojan benchmarking and its effect on optical detection. (via Semantic Scholar)
Sources: Web Of Science, NC State University Libraries
Added: August 23, 2021

2021 review

Dielectric and mechanical properties of hypersonic radome materials and metamaterial design: A review

[Review of ]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 42(1), 1–17.

author keywords: Radome; Hypersonic; Ceramic; High temperature; Review; Metamaterial
Sources: Web Of Science, NC State University Libraries
Added: November 8, 2021

2021 chapter

Printable Materials for Additive Manufacturing in Harsh Earth and Space Environments

In M. L. Terranova & E. Tamburri (Eds.), Nanotechnology in Space. CRC Press - Taylor & Francis Group.

By: A. Schrand, M. Kolel-Veetil, E. Elston, C. Neff, T. Ajayi & C. Xu

Ed(s): M. Terranova & E. Tamburri

Source: NC State University Libraries
Added: May 14, 2022

2021 journal article

Temperature and Pressure Wireless Ceramic Sensor (Distance=0.5 Meter) for Extreme Environment Applications

SENSORS, 21(19).

author keywords: extreme environments; passive wireless sensors; patch antenna design; polymer-derived ceramic; radio frequency identification; temperature sensor; pressure sensor
TL;DR: The developed temperature/pressure sensing system provides a feasible solution for wireless measurement for extreme environment applications and closely matches the thermocouple measurement. (via Semantic Scholar)
Sources: Web Of Science, NC State University Libraries
Added: November 1, 2021

2020 journal article

Additive manufacturing of ZrB2-ZrSi2 ultra-high temperature ceramic composites using an electron beam melting process

CERAMICS INTERNATIONAL, 47(2), 2397–2405.

author keywords: Additive manufacturing; Electron beam melting; Composites; Borides
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: March 15, 2021

2020 journal article

Complex impedance spectra of polymer-derived SiC annealed at ultrahigh temperature

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 103(12), 6860–6868.

author keywords: carbon; impedance spectroscopy; silicon carbide; ultrahigh temperature
Sources: Web Of Science, NC State University Libraries
Added: August 31, 2020

2020 journal article

Dielectric properties of polymer-derived ceramic reinforced with boron nitride nanotubes

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 103(10), 5731–5742.

author keywords: boron nitride nanotubes (BNNTs); dielectric property; polymer-derived ceramics (PDCs)
Sources: Web Of Science, NC State University Libraries
Added: July 13, 2020

2020 journal article

Electrical Conductivity and Structural Evolution of Polymer Derived SiC Ceramics Pyrolyzed From 1200°C to 1800°C

Journal of Micro and Nano-Manufacturing, 8(2).

By: M. Chowdhury n, K. Wang, Y. Jia n & C. Xu n

Sources: Crossref, NC State University Libraries, Web Of Science
Added: May 18, 2020

2020 journal article

Multifunctional Ceramic Composite System for Simultaneous Thermal Protection and Electromagnetic Interference Shielding for Carbon Fiber-Reinforced Polymer Composites

ACS Applied Materials & Interfaces, 12(52), 58005–58017.

author keywords: polymer-derived ceramic; carbon nanotubes; multifunctional composites; electromagnetic interference shielding; thermal protection
TL;DR: Results of this study showed that materials with a good thermal insulation and electromagnetic interference shielding can be obtained simultaneously by confining the electron movement inside the materials and refraining their movement at the skin surface. (via Semantic Scholar)
Sources: Web Of Science, NC State University Libraries, Crossref
Added: February 1, 2021

2020 conference paper

Science and Engineering Courses, Theory and Practice: An Example

2019 ASEE Annual Conference & Exposition Proceedings. Presented at the 2019 ASEE Annual Conference & Exposition, Tampa, Florida.

By: S. Mousavinezhad* & C. Xu n

Event: 2019 ASEE Annual Conference & Exposition at Tampa, Florida on June 15-19, 2019

Sources: NC State University Libraries, NC State University Libraries
Added: December 8, 2020

2020 conference paper

Teaching and Learning of Electrical and Computer Engineering Courses with High Mathematical Contents

2019 ASEE Annual Conference & Exposition Proceedings. Presented at the 2019 ASEE Annual Conference & Exposition, Tampa, Florida.

By: S. Mousavinezhad*, C. Xu n & E. Tatar*

Event: 2019 ASEE Annual Conference & Exposition at Tampa, Florida on June 15-19, 2019

Sources: NC State University Libraries, NC State University Libraries
Added: December 8, 2020

2019 journal article

Aligned carbon nanotube/carbon (CNT/C) composites with exceptionally high electrical conductivity at elevated temperature to 400 degrees C

MATERIALS RESEARCH EXPRESS, 6(11).

By: Y. Jia*, J. Yang, K. Wang, M. Chowdhury, B. Chen, Y. Su, B. Nickerson, C. Xu

author keywords: carbon nanotube; chemical vapor infiltration; electrical conductivity
Sources: Web Of Science, NC State University Libraries
Added: October 14, 2019

2019 conference paper

Multifunctional Hybrid Composite for Thermal Protection of Carbon Fiber Reinforced Polymers (CFRPS) in Aerospace Applications

SAMPE 2019 - Charlotte, NC. Presented at the SAMPE 2019 - Charlotte, NC.

By: T. Ajayi, K. Kim, J. Liu, B. Nickerson & C. Xu*

Event: SAMPE 2019 - Charlotte, NC

Sources: Crossref, NC State University Libraries
Added: June 6, 2020

2019 journal article

Wide-Band Tunable Microwave-Absorbing Ceramic Composites Made of Polymer-Derived SiOC Ceramic and in Situ Partially Surface-Oxidized Ultra-High-Temperature Ceramics

ACS APPLIED MATERIALS & INTERFACES, 11(49), 45862–45874.

author keywords: microwave-absorbing materials; interfacial polarization; multifunctional ceramic composites; ultra-high-temperature ceramics (UHTCs); polymer-derived ceramics (PDCs)
TL;DR: This study reports a novel high-temperature microwave absorbing ceramic composites made of polymer derived SiOC ceramic and in-situ partially surface-oxidized ultra-high temperature ceramic (UHTC) ZrB2 nanoparticles that has a significantly wide microwave absorption bandwidth. (via Semantic Scholar)
Sources: Web Of Science, NC State University Libraries
Added: January 6, 2020

2018 journal article

A hybrid ceramic-polymer composite fabricated by co-curing lay-up process for a strong bonding and enhanced transient thermal protection

Ceramics International, 44(10), 11497–11504.

By: L. Ju*, J. Yang*, A. Hao*, J. Daniel*, J. Morales*, S. Nguyen*, P. Andrei*, R. Liang*, E. Hellstrom*, C. Xu*

Contributors: L. Ju*, J. Yang*, A. Hao*, J. Daniel*, J. Morales*, S. Nguyen*, P. Andrei*, R. Liang*, E. Hellstrom*, C. Xu*

author keywords: Ceramic matrix composites (CMCs); Polymer matrix composites (PMCs); Carbon fiber reinforced polymer (CFRP) composite; Adhesion; Bonding strength
Source: ORCID
Added: December 6, 2018

2018 speech

Wireless Temperature Sensor for High Temperature Environments (up to 1000C) using RF Techniques with 0.5 meter Sensing Distance

Presented at the 41th Annual Conference on Composites, Materials, and Structures, Cocoa beach, FL.

By: C. Xu & J. Daniel

Event: 41th Annual Conference on Composites, Materials, and Structures at Cocoa beach, FL

Source: NC State University Libraries
Added: November 13, 2018

2017 book

Effect of Processing Conditions on Electric and Dielectric Properties of Polymer-Derived SiC Ceramics

Pittsburgh, PA: Materials Science & Technology.

By: C. Xu & K. Wang

Source: NC State University Libraries
Added: November 13, 2018

2017 journal article

Enhanced cyclic oxidation resistance through the self-healing of segmented cracks using nano-Al<inf>2</inf>O<inf>3</inf>/Ni-20 wt%Al particles in laser re-melted thermal barrier coatings

Materials Letters, 201, 156–160.

author keywords: Laser processing; TBCs; Oxidation; Sintering; TGO
Source: ORCID
Added: December 6, 2018

2017 speech

Metamaterial Enabling RF Transparency – Ceramic Composite Design for High Temperature Application

Presented at the National Space and Missile Materials Symposium, CA.

By: J. Macdonald & C. Xu

Event: National Space and Missile Materials Symposium at CA

Source: NC State University Libraries
Added: November 13, 2018

2017 speech

Non-Destructive Testing of Composite Materials at High Temperature (2000oC)

Presented at the Material Measurements Working Group, Dayton, OH.

By: C. Xu & J. Peebles

Event: Material Measurements Working Group at Dayton, OH

Source: NC State University Libraries
Added: November 13, 2018

2017 journal article

Pearl-Chain Formation of Discontinuous Carbon Fiber Under Electrical Field

Journal of Manufacturing and Materials Processing, 1(2), 22.

By: J. Daniel*, L. Ju*, J. Yang*, X. Sun*, N. Gupta*, A. Schrand, C. Xu*

author keywords: polarization; carbon fiber alignment; pearl-chain formation
Sources: Web Of Science, ORCID, NC State University Libraries
Added: November 13, 2018

2017 journal article

Study of Chip Morphology and Chip Formation Mechanism during Machining of Magnesium-Based Metal Matrix Composites

Journal of Manufacturing Science and Engineering, Transactions of the ASME, 139(9).

By: B. Davis*, D. Dabrow*, L. Ju*, A. Li*, C. Xu* & Y. Huang*

Contributors: B. Davis*, D. Dabrow*, L. Ju*, A. Li*, C. Xu* & Y. Huang*

author keywords: magnesium; metal matrix composite; machining; chip morphology; chip formation mechanism
Source: ORCID
Added: December 6, 2018

2017 conference paper

Study of chip morphology and chip formation mechanism during machining of magnesium-based metal matrix composites

ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, 2.

By: B. Davis*, D. Dabrow*, L. Ju*, A. Li*, C. Xu* & Y. Huang*

Contributors: B. Davis*, D. Dabrow*, L. Ju*, A. Li*, C. Xu* & Y. Huang*

Source: ORCID
Added: December 6, 2018

2017 journal article

The role of the surface morphology and segmented cracks on the damage forms of laser re-melted thermal barrier coatings in presence of a molten salt (Na<inf>2</inf>SO<inf>4</inf> + V<inf>2</inf>O<inf>5</inf>)

Corrosion Science, 115, 56–67.

author keywords: Ceramic; Molten salts; High temperature corrosion; Intergranular corrosion; Oxidation
Source: ORCID
Added: December 6, 2018

2017 speech

Thermal and Oxidation Stability of BNNT and BNNT Composites

Presented at the NASA Langley.

By: C. Xu, T. Ajayi & J. Morales

Event: NASA Langley

Source: NC State University Libraries
Added: November 13, 2018

2017 speech

Wireless Temperature Measurement Based on Radio Frequency (RF) Technology

Presented at the 40th Annual Conference on Composites, Materials, and Structures, Cocoa beach, FL.

By: C. Xu & J. Daniel

Event: 40th Annual Conference on Composites, Materials, and Structures at Cocoa beach, FL

Source: NC State University Libraries
Added: November 13, 2018

2016 journal article

Characterization and Alignment of Carbon Nanofibers under Shear Force in Microchannel

Journal of Nanomaterials, 2016.

By: J. Yang*, S. Dong*, D. Webster*, J. Gilmore* & C. Xu*

Contributors: J. Yang*, S. Dong*, D. Webster*, J. Gilmore* & C. Xu*

Source: ORCID
Added: December 6, 2018

2016 conference paper

Computer and Information Technology Tools in Signals & Systems

Computer and Information Technology Tools in Signals & Systems. 2016 ASEE Annual Conference & Exposition Proceedings. Presented at the 2016 ASEE Annual Conference & Exposition.

By: C. Xu* & S. Mousavinezhad*

Event: 2016 ASEE Annual Conference & Exposition

Sources: Crossref, NC State University Libraries
Added: September 13, 2020

2016 journal article

Development of a Wireless Temperature Sensor Using Polymer-Derived Ceramics

Journal of Sensors, 2016.

By: R. Zhao*, G. Shao*, N. Li*, C. Xu* & L. An*

Contributors: R. Zhao*, G. Shao*, N. Li*, C. Xu* & L. An*

TL;DR: A temperature sensor has been developed using an embedded system and a sensor head made of polymer-derived SiAlCN ceramics (PDCs) to demonstrate the possibility of using such sensors for real world applications. (via Semantic Scholar)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: December 6, 2018

2016 journal article

Effect of drilling allowance on TBC delamination, spatter and re-melted cracks characteristics in laser drilling of TBC coated superalloys

International Journal of Machine Tools and Manufacture, 106, 1–10.

author keywords: Laser drilling; Thermal barrier coating; Drilling allowance; TBC delamination; Spatter; Re-melted cracks
Source: ORCID
Added: December 6, 2018

2016 speech

High Conductive Ceramic Thin Film with Unique Mechanical Property

Presented at the Ceramic Expo, Cleveland, OH.

By: C. Xu

Event: Ceramic Expo at Cleveland, OH

Source: NC State University Libraries
Added: November 13, 2018

2016 journal article

High electrical conductivity and anisotropy of aligned carbon nanotube nanocomposites reinforced by silicon carbonitride

Scripta Materialia, 124, 21–25.

By: J. Yang*, R. Downes, A. Schrand*, J. Park*, R. Liang* & C. Xu*

Contributors: J. Yang*, R. Downes, A. Schrand*, J. Park*, R. Liang* & C. Xu*

author keywords: Carbon nanotubes; Ceramic matrix composites; Electrical properties; Scanning electron microscopy; Alignment
Source: ORCID
Added: December 6, 2018

2016 journal article

Microstructure, mechanical properties and oxidation resistance of SiC<inf>f</inf>/SiC composites incorporated with boron nitride nanotubes

RSC Advances, 6(86), 83482–83492.

By: G. Zhu*, S. Dong*, D. Ni*, C. Xu* & D. Wang*

Contributors: G. Zhu*, S. Dong*, D. Ni*, C. Xu* & D. Wang*

Source: ORCID
Added: December 6, 2018

2016 speech

Strong and Flexible Ceramic Composites with High In-Plane Thermal Conductivity for Hypersonic Applications

Presented at the Air Force Research Lab (AFRL), Eglin, FL.

By: C. Xu

Event: Air Force Research Lab (AFRL) at Eglin, FL

Source: NC State University Libraries
Added: November 13, 2018

2016 journal article

Strong and ultra-flexible polymer-derived silicon carbonitride nanocomposites by aligned carbon nanotubes

Ceramics International, 42(12), 13359–13367.

By: J. Yang*, R. Downes, Z. Yu*, J. Park*, R. Liang* & C. Xu*

Contributors: J. Yang*, R. Downes, Z. Yu*, J. Park*, R. Liang* & C. Xu*

author keywords: Nanocomposites; Electron microscopy; Mechanical properties; Toughness and toughening
Source: ORCID
Added: December 6, 2018

2016 journal article

Study on coexistence of brittle and ductile fractures in nano reinforcement composites under different loading conditions

International Journal of Fracture, 204(2), 205–224.

By: Y. Qiao*, J. Liu*, Y. Jia*, C. Xu*, L. An* & Y. Bai*

Contributors: Y. Qiao*, J. Liu*, Y. Jia*, C. Xu*, L. An* & Y. Bai*

author keywords: Brittle fracture; Ductile fracture; Particulate reinforced material
Source: ORCID
Added: December 6, 2018

2016 conference paper

Teaching and Learning of Engineering Topics with Software Tools

Presented at the ASEE Annual Conference & Exposition. ASEE Annual Conference & Exposition, New Orleans, CA.

By: C. Xu, S. Wentworth & H. Mousavinezhad

Event: ASEE Annual Conference & Exposition. ASEE Annual Conference & Exposition at New Orleans, CA

Source: NC State University Libraries
Added: February 7, 2021

2016 speech

Three-Dimensional Multi-Reinforced Ceramic Composites with Enhanced Through-Thickness Thermal Conductivity

Presented at the 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC-9), Toronto, Canada.

By: C. Xu & J. Yang

Event: 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC-9) at Toronto, Canada

Source: NC State University Libraries
Added: November 13, 2018

2016 journal article

Three-dimensional-linked carbon fiber-carbon nanotube hybrid structure for enhancing thermal conductivity of silicon carbonitride matrix composites

Carbon, 108, 38–46.

By: J. Yang*, J. Sprengard*, L. Ju*, A. Hao*, M. Saei*, R. Liang*, G. Cheng*, C. Xu*

Contributors: J. Yang*, J. Sprengard*, L. Ju*, A. Hao*, M. Saei*, R. Liang*, G. Cheng*, C. Xu*

Source: ORCID
Added: December 6, 2018

2016 journal article

Zones of material separation in simulations of cutting

International Journal of Mechanical Sciences, 115-116, 262–279.

By: H. Pan*, J. Liu*, Y. Choi*, C. Xu*, Y. Bai* & T. Atkins*

Contributors: H. Pan*, J. Liu*, Y. Choi*, C. Xu*, Y. Bai* & T. Atkins*

author keywords: Cutting; Separation; Boundary layers; Finite element method (FEM); Ductile fracture
Source: ORCID
Added: December 6, 2018

2015 speech

Ceramic Matrix Composites (CMCs) with High Volume Fractions of Reinforcements (up to 60 Vol.%) and Ensuring 3-Dimensional Bonding Strength

Presented at the Workshop on Carbon Fiber and their Composite, Oak Ridge, TN.

By: C. Xu

Event: Workshop on Carbon Fiber and their Composite at Oak Ridge, TN

Source: NC State University Libraries
Added: November 13, 2018

2015 conference paper

Computer-aided design (CAD) of recursive/non-recursive filters

ASEE Annual Conference and Exposition, Conference Proceedings, 122nd ASEE Annual Conference and Exposition: Making Value for Society(122nd ASEE Annual Conference and Exposition: Making Value for Society). http://www.scopus.com/inward/record.url?eid=2-s2.0-84941994086&partnerID=MN8TOARS

By: C. Xu & S. Mousavinezhad

Contributors: C. Xu & S. Mousavinezhad

Source: ORCID
Added: December 6, 2018

2015 speech

Effective Nano-Infiltration to Make Fully-Densed Ceramic Composites with A High Volume Fraction of Reinforcements

Presented at the 39th International Conference and Expo on Advanced Ceramics and Composites, Daytona, FL.

By: C. Xu, J. Yang, J. L., Z. Jiang & H. Wang

Event: 39th International Conference and Expo on Advanced Ceramics and Composites at Daytona, FL

Source: NC State University Libraries
Added: November 13, 2018

2015 speech

Flexible Ceramic Composites with High In-Plane Thermal Conductivity

Presented at the Air Force Research Lab (AFRL) at Eglin, FL.

By: C. Xu

Event: at Air Force Research Lab (AFRL) at Eglin, FL

Source: NC State University Libraries
Added: November 13, 2018

2015 speech

Flexible Ceramic Matrix Composite with High Strength and Conductive by Aligned CNTs

Presented at the 39th International Conference and Expo on Advanced Ceramics and Composites, Daytona, FL.

By: J. Yang, C. Xu, L. Ju, R. Downes, A. Hao & R. Liang

Event: 39th International Conference and Expo on Advanced Ceramics and Composites at Daytona, FL

Source: NC State University Libraries
Added: November 13, 2018

2015 speech

Flexible Ceramic Thin Film with High Conductivity

Presented at the Defense Manufacturing Conference, Phoenix, AZ.

By: C. Xu

Event: Defense Manufacturing Conference at Phoenix, AZ

Source: NC State University Libraries
Added: November 13, 2018

2015 journal article

Fully Printed Halide Perovskite Light-Emitting Diodes with Silver Nanowire Electrodes

ACS Nano, 10(2), 1795–1801.

By: S. Bade*, J. Li*, X. Shan*, Y. Ling*, Y. Tian*, T. Dilbeck*, T. Besara*, T. Geske* ...

Contributors: S. Bade*, J. Li*, X. Shan*, Y. Ling*, Y. Tian*, T. Dilbeck*, T. Besara*, T. Geske* ...

author keywords: halide perovskites; printed electronics; light-emitting diodes; composites; flexible electronics; moisture
TL;DR: Printed organometal halide perovskite light-emitting diodes (LEDs) are reported that have indium tin oxide (ITO) or carbon nanotubes (CNTs) as the transparent anode, and a printed composite film consisting of methylammonium lead tribromide and poly(ethylene oxide) (PEO) asThe emissive layer, and printed silver nanowires as the cathode. (via Semantic Scholar)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: December 6, 2018

2015 journal article

Mechanical response and microstructure of 2D carbon fiber reinforced ceramic matrix composites with SiC and Ti<inf>3</inf>SiC<inf>2</inf>fillers

Ceramics International, 42(2), 3019–3027.

By: J. Yang*, S. Dong* & C. Xu*

Contributors: J. Yang*, S. Dong* & C. Xu*

author keywords: Composites; Electron microscopy; Mechanical properties; SiC; Fibers
Source: ORCID
Added: December 6, 2018

2015 journal article

Multifunctional Flexible Ceramic Membranes

Naval Science and Technology – Future Force, 2, 26.

By: C. Xu

Source: NC State University Libraries
Added: November 13, 2018

2014 journal article

Evanescent-mode-resonator-based and antenna-integrated wireless passive pressure sensors for harsh-environment applications

Sensors and Actuators, A: Physical, 220, 22–33.

By: H. Cheng*, G. Shao*, S. Ebadi*, X. Ren*, K. Harris*, J. Liu*, C. Xu*, L. An*, X. Gong*

Contributors: H. Cheng*, G. Shao*, S. Ebadi*, X. Ren*, K. Harris*, J. Liu*, C. Xu*, L. An*, X. Gong*

author keywords: Evanescent-mode resonator; Harsh environment; Integrated antenna; Polymer-Derived Ceramic; Pressure sensor; Wireless passive sensor
Source: ORCID
Added: December 6, 2018

2014 journal article

Interaction of the cutting tools and the ceramic-reinforced metal matrix composites during micro-machining: A review

CIRP Journal of Manufacturing Science and Technology, 7(2), 55–70.

By: J. Liu*, J. Li* & C. Xu*

Contributors: J. Liu*, J. Li* & C. Xu*

author keywords: Micro-machining; Heterogeneous materials; Ceramic particle reinforcement; Metal matrix composites; Size effect; Minimum chip thickness; Tool-workpiece interaction; Strengthening mechanism; Materials microstructural effect; Materials mechanical property; Fracture mechanism; Machining dynamics; Surface generation
Source: ORCID
Added: December 6, 2018

2014 speech

Optimization of Carbon Nanofibers Alignment Induced by Shear Force

Presented at the 38th International Conference and Exposition on Advanced Ceramics and Composites, Daytona, FL.

By: J. Yang & C. Xu

Event: 38th International Conference and Exposition on Advanced Ceramics and Composites at Daytona, FL

Source: NC State University Libraries
Added: November 13, 2018

2014 journal article

Sliding Mode Control of Feed Drive System for a Three-axis Micro-Machining Platform with Nano-Resolution

Journal of Control Engineering and Technology, 4(1), 29–36.

By: Y. Ji & C. Xu

Source: NC State University Libraries
Added: November 13, 2018

2014 journal article

Temperature sensor made of polymer-derived ceramics for high-temperature applications

Sensors and Actuators, A: Physical, 219, 58–64.

By: R. Zhao*, G. Shao*, Y. Cao*, L. An* & C. Xu*

Contributors: R. Zhao*, G. Shao*, Y. Cao*, L. An* & C. Xu*

author keywords: High-temperature sensor; Temperature measurement; Polymer-derived ceramic; Turbine engine
UN Sustainable Development Goal Categories
14. Life Below Water (OpenAlex)
Source: ORCID
Added: December 6, 2018

2013 conference paper

Analytical modeling and experimental validation of force ripple and friction force for general direct drive systems

ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013, 2.

By: R. Zhao* & C. Xu*

Contributors: R. Zhao* & C. Xu*

Source: ORCID
Added: December 6, 2018

2013 journal article

Cutting force prediction on micromilling magnesium metal matrix composites with nanoreinforcements

Journal of Micro and Nano-Manufacturing, 1(1).

By: J. Liu, J. Li & C. Xu*

Contributors: J. Liu, J. Li & C. Xu*

author keywords: magnesium metal matrix composite; nanoparticle reinforcement; minimum chip thickness; particle size; volume fraction
Source: ORCID
Added: December 6, 2018

2013 journal article

Evaluation of ductile fracture models in finite element simulation of metal cutting processes

Journal of Manufacturing Science and Engineering, Transactions of the ASME, 136(1).

By: J. Liu, Y. Bai & C. Xu*

Contributors: J. Liu, Y. Bai & C. Xu*

author keywords: finite element modeling; ductile fracture models; machining processes simulation; Johnson-Cook (J-C) model; chip formation
Source: ORCID
Added: December 6, 2018

2013 journal article

Experimental investigation on the machinability of SiC nano-particles reinforced magnesium nanocomposites during micro-milling processes

International Journal of Manufacturing Research, 8(1), 64–84.

Contributors: J. Li*, J. Liu*, J. Liu*, Y. Ji* & C. Xu*

TL;DR: This paper experimentally investigates the machinability of magnesium metal matrix composites with high volume fractions of SiC nano-particles using micro-milling process and develops experimental models that can be used to predict the cutting force, the surface roughness, and then optimise the machining conditions with the required cutting forces and surface Roughness. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2013 speech

Polymer Derived Ceramic Sensors for Ultra-High Temperature Application

Presented at the 37th International Conference and Exposition on Advanced Ceramics and Composites, Combustion Institute, Daytona, FL.

By: G. Shao, D. Freese, C. Xu & L. An

Event: 37th International Conference and Exposition on Advanced Ceramics and Composites, Combustion Institute at Daytona, FL

Source: NC State University Libraries
Added: November 13, 2018

2013 conference paper

Polymer-derived ceramic sensors for temperature measurement in harsh environment

Proceedings of the ASME Turbo Expo, 4.

By: D. Freese*, G. Shao* & C. Xu*

Contributors: D. Freese*, G. Shao* & C. Xu*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: December 6, 2018

2012 journal article

Ceramic nanocomposites reinforced with a high volume fraction of carbon nanofibers

Materials Letters, 68, 108–111.

By: G. Shao*, G. Zhao*, F. Yang*, C. Xu* & L. An*

Contributors: G. Shao*, G. Zhao*, F. Yang*, C. Xu* & L. An*

author keywords: Ceramics; Nanocomposites; Carbon nanofibers; Infiltration
Source: ORCID
Added: December 6, 2018

2012 journal article

Design, fabrication, and characterization of linear multiplexed electrospray atomizers micro-machined from metal and polymers

Aerosol Science and Technology, 47(2), 146–152.

By: B. Lojewski*, W. Yang*, H. Duan*, C. Xu* & W. Deng*

Contributors: B. Lojewski*, W. Yang*, H. Duan*, C. Xu* & W. Deng*

Source: ORCID
Added: December 6, 2018

2012 journal article

Tool Wear Analysis Using Wavelet Transform Based Cutting Force and Acoustic Emission

Journal of Aviation and Aerospace Perspective, 2(2), 35–54.

By: Y. Ji, M. Hernandez, D. Giesecke, D. Bartles & C. Xu

Source: NC State University Libraries
Added: November 13, 2018

2012 conference paper

Wireless passive sensor development for harsh environment applications

2012 IEEE International Workshop on Antenna Technology, iWAT 2012, 140–143.

By: X. Gong*, L. An* & C. Xu*

Contributors: X. Gong*, L. An* & C. Xu*

Source: ORCID
Added: December 6, 2018

2011 journal article

A multilevel fuzzy control design for a class of multiinput single-output systems

IEEE Transactions on Industrial Electronics, 59(8), 3113–3123.

By: C. Xu* & Y. Shin*

Contributors: C. Xu* & Y. Shin*

author keywords: Adaptive systems; fuzzy control; multivariable systems; stability
TL;DR: An adaptive fuzzy controller is developed for a class of multiinput single-output nonlinear systems, where the system differential output has a monotonically increasing or decreasing relationship with each system differential input. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2011 journal article

A self-tuning fuzzy controller for a class of multi-input multi-output nonlinear systems

Engineering Applications of Artificial Intelligence, 24(2), 238–250.

By: C. Xu* & Y. Shin*

Contributors: C. Xu* & Y. Shin*

author keywords: Fuzzy control; Self-tuning systems; Multi-input multi-output system; Relative gain array; Non-linear systems
TL;DR: Two sets of simulation examples demonstrate that the proposed fuzzy control strategy can be a promising way in controlling multivariable nonlinear systems with unknown system uncertainties and time-varying parameters. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2011 journal article

Aluminum nanocomposites having wear resistance better than stainless steel

Journal of Materials Research, 26(19), 2479–2483.

Contributors: L. An*, J. Qu*, J. Luo*, Y. Fan*, L. Zhang*, J. Liu*, C. Xu*, P. Blau*

Source: ORCID
Added: December 6, 2018

2011 conference paper

Analysis of a simultaneous CNC turning and boring operation via multisensor monitoring

ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011, 2, 273–280.

By: E. Deane*, M. Hernandez*, D. Giesecke*, M. Meanor*, S. Collins*, Y. Ji*, C. Xu*

Contributors: E. Deane*, M. Hernandez*, D. Giesecke*, M. Meanor*, S. Collins*, Y. Ji*, C. Xu*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: December 6, 2018

2011 speech

Investigation of Micro-End-Milling of Polymer-Derived Ceramics for High Temperature Micro-Sensor Fabrication

Presented at the NSF CMMI Engineering Research and Innovation Conference, Atlanta, GA.

By: J. Liu, J. Li, G. Shao, Y. Ji, C. Xu & L. An

Event: NSF CMMI Engineering Research and Innovation Conference at Atlanta, GA

Source: NC State University Libraries
Added: November 13, 2018

2011 conference paper

Investigation on the effect of SiC nanoparticles on cutting forces for micro-milling Magnesium Matrix Composites

ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011, 2, 525–536.

By: J. Liu*, J. Li*, Y. Ji* & C. Xu*

Contributors: J. Liu*, J. Li*, Y. Ji* & C. Xu*

Source: ORCID
Added: December 6, 2018

2011 conference paper

Modeling and control of feed drive system for a micro-machining platform with nano-resolution

ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control, DSCC 2011, 1, 263–270.

By: Y. Ji*, R. Zhao* & C. Xu*

Contributors: Y. Ji*, R. Zhao* & C. Xu*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: December 6, 2018

2011 speech

Recent Advances on Wireless Passive High-Temperature Sensors for Harsh Environments

Presented at the 35th International Conference and Exposition on Advanced Ceramics and Composites, Composite Institute, Daytona, FL.

By: X. Gong, L. An & C. Xu

Event: 35th International Conference and Exposition on Advanced Ceramics and Composites, Composite Institute at Daytona, FL

Source: NC State University Libraries
Added: November 13, 2018

2011 journal article

Self-assembled carbon-silicon carbonitride nanocomposites: High-performance anode materials for lithium-ion batteries

Journal of Materials Chemistry, 21(45), 18186–18190.

Contributors: Y. Chen*, C. Li*, Y. Wang*, Q. Zhang*, C. Xu*, B. Wei*, L. An*

Source: ORCID
Added: December 6, 2018

2011 journal article

Synthesis of nanostructured silicon carbide at ultralow temperature using self-assembled polymer micelles as a precursor

Journal of Materials Chemistry, 21(44), 17619–17622.

By: Y. Yu*, X. Yang*, C. Xu*, J. Fang* & L. An*

Contributors: Y. Yu*, X. Yang*, C. Xu*, J. Fang* & L. An*

Source: ORCID
Added: December 6, 2018

2011 journal article

Synthesis of spherical non-oxide silicon carbonitride ceramic particles

Journal of the American Ceramic Society, 94(9), 2779–2782.

By: Y. Yu*, Y. Chen*, C. Xu*, J. Fang* & L. An*

Contributors: Y. Yu*, Y. Chen*, C. Xu*, J. Fang* & L. An*

Source: ORCID
Added: December 6, 2018

2010 conference paper

A Contactless Polymer Derived Ceramic Temperature Sensing System for Turbine Applications

Presented at the Annual Technical Symposium, Florida Center for Advanced AeroPropulsion.

By: J. Liu, J. Li, B. Grummel, C. Xu & J. Shen

Event: Annual Technical Symposium at Florida Center for Advanced AeroPropulsion

Source: NC State University Libraries
Added: February 7, 2021

2010 conference paper

Acoustic perturbation effects on the fluid dynamics and swirling flame response in a non-premixed co-flow burner

Proceedings of the ASME Turbo Expo, 2(PARTS A AND B), 1309–1321.

By: U. Idahosa*, A. Saha*, N. Khatami*, C. Xu* & S. Basu*

Contributors: U. Idahosa*, A. Saha*, N. Khatami*, C. Xu* & S. Basu*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: December 6, 2018

2010 speech

Carbon Nanofiber Reinforced Polymer Derived Ceramic Nanocomposites

Presented at the Materials Science & Technology (MS&T'10), Houston, TX.

By: G. Shao, C. Xu & L. An

Event: Materials Science & Technology (MS&T'10) at Houston, TX

Source: NC State University Libraries
Added: November 13, 2018

2010 speech

Experimental Setup for Multi-sensor Fusion and Data Correlation Analysis during CNC Steel Turning Process

Presented at the ASME International Manufacturing Science and Engineering Conference, Erie, PA.

By: A. Joslin, M. Hernandez, S. Collins, D. Giesecke, Y. Ji & C. Xu

Event: ASME International Manufacturing Science and Engineering Conference at Erie, PA

Source: NC State University Libraries
Added: November 13, 2018

2010 conference paper

Experimental setup for multi-sensor fusion and data correlation analysis during CNC steel turning process

ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, 1, 461–467.

By: A. Joslin*, M. Hernandez*, E. Deane*, S. Collins*, C. Xu* & D. Wilson*

Contributors: A. Joslin*, M. Hernandez*, E. Deane*, S. Collins*, C. Xu* & D. Wilson*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: December 6, 2018

2010 journal article

Fabrication of AA6061/Al<inf>2</inf>O<inf>3</inf>nano ceramic particle reinforced composite coating by using friction stir processing

Journal of Materials Science, 45(16), 4431–4438.

By: M. Yang*, C. Xu*, C. Wu*, K. Lin*, Y. Chao* & L. An*

Contributors: M. Yang*, C. Xu*, C. Wu*, K. Lin*, Y. Chao* & L. An*

Source: ORCID
Added: December 6, 2018

2010 journal article

Fabrication of Si3N4/SiC nanocomposites toughened by in-situ formed low-dimensional nanostructures

Solid State Sciences, 12(9), 1692–1695.

By: W. Yang*, F. Gao*, C. Xu*, G. Wei* & L. An*

Contributors: W. Yang*, F. Gao*, C. Xu*, G. Wei* & L. An*

author keywords: Ceramics; Silicon carbide; Silicon nitride
Source: ORCID
Added: December 6, 2018

2010 conference paper

Machinability study of SiC nano-particles reinforced Magnesium nanocomposites during micro-milling processes

ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, 2, 391–398.

By: J. Li*, J. Liu* & C. Xu*

Contributors: J. Li*, J. Liu* & C. Xu*

Source: ORCID
Added: December 6, 2018

2010 journal article

Making bulk ceramics from polymeric precursors

Journal of the American Ceramic Society, 93(10), 3017–3019.

By: T. Jiang*, A. Hill, W. Fei*, Y. Wei*, M. Tellam*, C. Xu*, L. An*

Contributors: T. Jiang*, A. Hill, W. Fei*, Y. Wei*, M. Tellam*, C. Xu*, L. An*

Source: ORCID
Added: December 6, 2018

2010 conference paper

Micro-machinable polymer-derived ceramic sensors for high-temperature applications

In M. Tomizuka (Ed.), Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2010 (Vol. 7647).

By: J. Liu*, C. Xu* & L. An*

Contributors: J. Liu*, C. Xu* & L. An*

Ed(s): M. Tomizuka

Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring

author keywords: polymer-derived ceramics; high temperature micro-sensor; micro-machining
Sources: ORCID, Crossref, NC State University Libraries
Added: December 6, 2018

2010 journal article

Non-premixed acoustically perturbed swirling flame dynamics

Combustion and Flame, 157(9), 1800–1814.

By: U. Idahosa*, A. Saha*, C. Xu* & S. Basu*

Contributors: U. Idahosa*, A. Saha*, C. Xu* & S. Basu*

author keywords: Swirl stabilized flames; Non-premixed flames; Rayleigh criterion; Forced flame response; Wavelet analysis; Acoustic flame perturbation
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: December 6, 2018

2010 journal article

Online Tool Deflection Compensation in End Milling of Curved Workpiece

International Journal of Electronics, Computing and Engineering Education, 1(1), 23–28.

By: Y. Tang & C. Xu

Source: NC State University Libraries
Added: November 13, 2018

2010 journal article

Polymer-derived ceramic composite fibers with aligned pristine multiwalled carbon nanotubes

ACS Applied Materials and Interfaces, 2(4), 1150–1156.

By: S. Sarkar*, J. Zou*, J. Liu*, C. Xu*, L. An* & L. Zhai*

Contributors: S. Sarkar*, J. Zou*, J. Liu*, C. Xu*, L. An* & L. Zhai*

author keywords: align; carbon nanotubes; polymer-derived ceramic; electrospun fibers
MeSH headings : Ceramics; Electric Conductivity; Electrochemistry / methods; Electrodes; Magnetic Resonance Spectroscopy; Microscopy, Electron, Scanning / methods; Microscopy, Electron, Transmission / methods; Nanotechnology / methods; Nanotubes, Carbon / chemistry; Platinum / chemistry; Polymers / chemistry; Surface Properties
TL;DR: This work has shown that the fiber size increases with the increment of polymer concentration, whereas higher CNT content in the polymer solutions leads to thinner fibers attributable to the increased conductivity, suggesting excellent dispersion of CNTs and efficient CNT alignment via the electrospinning. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2010 conference paper

Robust estimation of a maneuvering target from multiple unmanned air vehicles' measurements

2010 International Symposium on Collaborative Technologies and Systems, CTS 2010, 537–545.

By: R. Allen*, K. Lin* & C. Xu*

Contributors: R. Allen*, K. Lin* & C. Xu*

TL;DR: An H-infinity filter is utilized to estimate the position of the maneuvering target to compensate for non-zero-mean noise and is shown to be superior to the Kalman filter. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2010 conference paper

SiCN ceramic fibers with aligned carbon nanotubes

International SAMPE Symposium and Exhibition (Proceedings). http://www.scopus.com/inward/record.url?eid=2-s2.0-78649483096&partnerID=MN8TOARS

By: S. Sarkar, J. Zou, C. Xu, L. An & L. Zhai

Contributors: S. Sarkar, J. Zou, C. Xu, L. An & L. Zhai

Source: ORCID
Added: December 6, 2018

2010 book

Traditional and non-traditional control techniques for grinding processes

In Machining with Abrasives (pp. 269–302).

By: J. Liu, C. Xu* & M. Jackson

Contributors: J. Liu, C. Xu* & M. Jackson

author keywords: Grinding; Control systems; Mathematical modeling; Quality
Source: ORCID
Added: December 6, 2018

2009 conference paper

A hybrid modeling technique for partially-known systems using linear regression and neural network

Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009, 2, 365–375.

By: A. Joslin* & C. Xu*

Contributors: A. Joslin* & C. Xu*

TL;DR: The hybrid modeling and system identification method is presented, combining linear least squares regression and artificial neural network techniques, and it is mathematically proven to give regression coefficients close to those which would be found if only a regression had been performed. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2009 journal article

A multifunctional high-speed spindle for micromachining medical materials

International Journal of Nano and Biomaterials, 2(6), 520–539.

By: M. Jackson, C. Xu* & W. Ahmed*

Contributors: M. Jackson, C. Xu* & W. Ahmed*

TL;DR: The optimum design was identified based on the lowest pressure variation on the rotor surface obtained from the FLUENT results, which provides a new direction in the development of mechanical micromachining. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2009 journal article

A stable hierarchical fuzzy control design for certain non-linear systems based on input-output passivity theory

Control and Intelligent Systems, 37(2), 103–113. http://www.scopus.com/inward/record.url?eid=2-s2.0-69949109741&partnerID=MN8TOARS

By: C. Xu & Y. Shin

Contributors: C. Xu & Y. Shin

Source: ORCID
Added: December 6, 2018

2009 journal article

Adaptive compensation of tool deflection in micromilling processes

International Journal of Nanomanufacturing, 3(1-2), 159–168.

By: Y. Tang*, C. Xu* & M. Jackson*

Contributors: Y. Tang*, C. Xu* & M. Jackson*

Source: ORCID
Added: December 6, 2018

2009 conference paper

Characterization of combustion dynamics in swirl stabilized flames

American Society of Mechanical Engineers, Power Division (Publication) PWR, 517–531.

By: U. Idahosa*, A. Saha*, C. Xu* & S. Basu*

Contributors: U. Idahosa*, A. Saha*, C. Xu* & S. Basu*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: December 6, 2018

2009 journal article

Diamond coated microtools for machining compact bone

International Journal of Nano and Biomaterials, 2(6), 505–519.

By: M. Jackson, M. Whitfield*, C. Xu* & W. Ahmed*

Contributors: M. Jackson, M. Whitfield*, C. Xu* & W. Ahmed*

TL;DR: The paper investigates the use of diamond coated cutting tools to prepare bone for prosthetic implants and the implications of their use on the machining characteristics of biological materials. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2009 conference paper

Fabrication and Thermo-Mechanical Testing of a High Temperature Shape Memory Alloy Helical Actuator

Presented at the Annual Technical Symposium, Florida Center for Advanced AeroPropulsion.

By: D. Nicholson, J. Liu, S. Qiu, A. Mak, J. Trinh, C. Xu, R. Vaidyanathan

Event: Annual Technical Symposium at Florida Center for Advanced AeroPropulsion

Source: NC State University Libraries
Added: February 12, 2021

2009 conference paper

Flame Response to Equivalence Ratio Oscillations in Perturbed Swirl Stabilized Flames

ASME Turbo Expo 2009 - Combustion Dynamics. Presented at the ASME Turbo Expo 2009 - Combustion Dynamics., Orlando, FL.

By: U. Idahosa, S. Abhishek, A. Joslin, S. Basu & C. Xu

Event: ASME Turbo Expo 2009 - Combustion Dynamics. at Orlando, FL

Source: NC State University Libraries
Added: February 12, 2021

2009 chapter

Formation of Nanostructured Metals

In Machining with Nanomaterials. Springer.

By: M. Jackson, J. Evans, C. Xu & W. Ahmed

Source: NC State University Libraries
Added: November 13, 2018

2009 conference paper

Frequency Response Characterization of Swirl Stabilized Flames Dynamics

Proceedings of the 6th US National Combustion Meeting of the Combustion Institute. Presented at the 6th US National Combustion Meeting of the Combustion Institute, Ann Arbor, MI.

By: U. Idahosa, A. Saha, C. Xu & S. Basu

Event: 6th US National Combustion Meeting of the Combustion Institute at Ann Arbor, MI

Source: NC State University Libraries
Added: February 12, 2021

2009 chapter

Fundamentals of Machining

In Machining with Nanomaterials. Springer.

By: M. Jackson, W. Ahmed & C. Xu

Source: NC State University Libraries
Added: November 13, 2018

2009 conference paper

Generation of optimal functions using particle swarm method over discrete intervals

Annual Conference of the North American Fuzzy Information Processing Society - NAFIPS.

By: F. Shamieh* & C. Xu*

Contributors: F. Shamieh* & C. Xu*

TL;DR: This paper aims to introduce the process of using a multi-level evaluation approach of particle swarm optimization to generate a solution function by replacing multiple variable assessment with sequential interval assessment. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2009 conference paper

Geometrical adaptive controller for tool deflection compensation in helical end milling processes

Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009, 2, 377–383.

By: Y. Tang*, C. Xu* & M. Jackson*

Contributors: Y. Tang*, C. Xu* & M. Jackson*

Source: ORCID
Added: December 6, 2018

2009 conference paper

On the fluid dynamics of acoustically perturbed non-premixed swirling flames

Fall Meeting of the Eastern States Section of the Combustion Institute 2009, 720–725. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946594823&partnerID=MN8TOARS

By: U. Idahosa, N. Khatami, A. Saha, C. Xu & S. Basu

Contributors: U. Idahosa, N. Khatami, A. Saha, C. Xu & S. Basu

Source: ORCID
Added: December 6, 2018

2009 chapter

Persistence, Consistence and Patience

In Tips on Getting an Academic Position. Lulu Web.

By: C. Xu

Source: NC State University Libraries
Added: November 13, 2018

2009 journal article

Survey on various control techniques in micro grinding processes

International Journal of Nanomanufacturing, 3(4), 398–408.

By: C. Xu*, Y. Tang* & M. Jackson*

Contributors: C. Xu*, Y. Tang* & M. Jackson*

Source: ORCID
Added: December 6, 2018

2008 journal article

A fuzzy inverse model construction method for general monotonic multi-input-single-output (MISO) systems

IEEE Transactions on Fuzzy Systems, 16(5), 1216–1231.

By: C. Xu* & Y. Shin*

Contributors: C. Xu* & Y. Shin*

author keywords: Fuzzy systems; inverse problems; multivariable systems; robot manipulators
TL;DR: This paper presents a novel method of systematically constructing a fuzzy inverse model for general multi-input-single-output (MISO) systems represented with triangular input membership functions, singleton output membership function, and fuzzy-mean defuzzification. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2008 conference paper

A multi-level fuzzy control design for general nonlinear multi-input single-output systems

Annual Conference of the North American Fuzzy Information Processing Society - NAFIPS.

By: C. Xu* & Y. Shin*

Contributors: C. Xu* & Y. Shin*

TL;DR: An adaptive fuzzy controller is developed for general multi-input single-output (MISO) nonlinear systems with time-varying characteristics and unknown system uncertainties to compensate for system uncertainties and time- varying parameters. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2008 speech

Adaptive Control of Cutting Force to Compensate Tool Deflection during Micro-Milling Processes

Presented at the 6th International Workshop on Microfactories, Evanston, IL.

By: C. Xu, Y. Tang & M. Jackson

Event: 6th International Workshop on Microfactories at Evanston, IL

Source: NC State University Libraries
Added: November 13, 2018

2008 journal article

An adaptive fuzzy controller for constant cutting force in end-milling processes

Journal of Manufacturing Science and Engineering, Transactions of the ASME, 130(3), 0310011–03100110.

By: C. Xu* & Y. Shin*

Contributors: C. Xu* & Y. Shin*

author keywords: fuzzy control; adaptive systems; force control; stability
TL;DR: A novel multilevel fuzzy control system is introduced and implemented for online force control of end-milling processes to increase machining productivity and improve workpiece quality, where the cutting force is maintained at its maximum allowable level in the presence of different variations inherent in milling processes. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2008 journal article

Cooperative Navigation and Adaptive Guidance

The Bulletin of Military Operations Research: Phalanx, 41(4), 12–17.

By: A. R. & C. Xu

Source: NC State University Libraries
Added: November 13, 2018

2008 speech

Finite Element Modeling and Vibration Control of a Tetraform Space Frame for Micro-Machining Processes

Presented at the 6th International Workshop on Microfactories, Evanston, IL.

By: C. Xu, K. Knipe & M. Jackson

Event: 6th International Workshop on Microfactories at Evanston, IL

Source: NC State University Libraries
Added: November 13, 2018

2008 journal article

Finite element modelling and vibration control of a tetrahedral space frame applied to micromachining

International Journal of Nano and Biomaterials, 1(4), 448–458.

By: K. Knipe*, C. Xu* & M. Jackson

Contributors: K. Knipe*, C. Xu* & M. Jackson

TL;DR: Finite element models using ANSYS and Matlab are developed that can be used to implement a positive position feedback controller to control and reduce the vibration magnitude of the tetrahedral space frame. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2008 book

Intelligent Systems: Modeling, Optimization and Control

In Intelligent Systems: Modeling, Optimization, and Control (pp. 1–433).

By: Y. Shin* & C. Xu*

Contributors: Y. Shin* & C. Xu*

TL;DR: This book highlights current research and applications, addresses issues encountered in the development of applied systems, and describes a wide range of intelligent systems techniques, including neural networks, fuzzy logic, evolutionary strategy, and genetic algorithms. (via Semantic Scholar)
Sources: ORCID, NC State University Libraries, NC State University Libraries
Added: November 13, 2018

2007 conference paper

A fuzzy inverse model construction method for a general MISO system with a monotonie input-output relationship

Annual Conference of the North American Fuzzy Information Processing Society - NAFIPS, 1–6.

By: C. Xu* & Y. Shin*

Contributors: C. Xu* & Y. Shin*

TL;DR: A novel method of systematically constructing the fuzzy inverse model for a general multi-input single-output (MISO) system represented with triangular input membership functions, singleton output membership function and fuzzy-mean defuzzification is presented. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2007 speech

Intelligent Control System for Manufacturing Processes

Presented at the North American Manufacturing Research Conference (NAMRC), Ann Arbor, MI.

By: C. Xu

Event: North American Manufacturing Research Conference (NAMRC) at Ann Arbor, MI

Source: NC State University Libraries
Added: November 13, 2018

2007 journal article

Interaction analysis for MIMO nonlinear systems based on a fuzzy basis function network model

Fuzzy Sets and Systems, 158(18), 2013–2025.

By: C. Xu* & Y. Shin*

Contributors: C. Xu* & Y. Shin*

author keywords: multi-input multi-output (MIMO) system; relative gain array (RGA); fuzzy basis function network (FBFN); multivariable interaction analysis
TL;DR: The applicability of the proposed method is suggested as an alternative way to derive the system multivariable interaction when the system mathematical model is not available. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2006 conference paper

A Hierarchical Self-tuning Fuzzy Controller for General Nonlinear Systems with Stability Analysis

Presented at the 3rd International Conference on Cybernetics and Information Technologies Systems and Applications, Orlando, FL.

By: C. Xu & Y. Shin

Event: 3rd International Conference on Cybernetics and Information Technologies Systems and Applications at Orlando, FL

Source: NC State University Libraries
Added: February 12, 2021

2006 conference paper

Adaptive Control of Cutting Force for End Milling Processes with System Variation using Self-tuning Fuzzy Technique

Presented at the ASME International Mechanical Engineering Congress and Exposition, Chicago, IL.

By: C. Xu & Y. Shin

Event: ASME International Mechanical Engineering Congress and Exposition at Chicago, IL

Source: NC State University Libraries
Added: February 12, 2021

2006 conference paper

An adaptive fuzzy controller for constant cutting force in end-milling processes

American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) DSC.

By: C. Xu* & Y. Shin*

Contributors: C. Xu* & Y. Shin*

Source: ORCID
Added: December 6, 2018

2006 journal article

Control of cutting force for creep-feed grinding processes using a multi-level fuzzy controller

Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 129(4), 480–492.

By: C. Xu* & Y. Shin*

Contributors: C. Xu* & Y. Shin*

Source: ORCID
Added: December 6, 2018

2005 journal article

Design of a multilevel fuzzy controller for nonlinear systems and stability analysis

IEEE Transactions on Fuzzy Systems, 13(6), 761–778.

By: C. Xu* & Y. Shin*

Contributors: C. Xu* & Y. Shin*

TL;DR: Simulations are carried out by applying the proposed multilevel fuzzy control (MLFC) to a uncertain nonlinear plants, and it is shown that much better system performances are achieved compared with conventional fuzzy logic controllers (FLC), even in presence of disturbance and noise. (via Semantic Scholar)
Source: ORCID
Added: December 6, 2018

2001 journal article

An Automatic Monitoring System on the Fault Diagnosis of NC machine Based on Internet Explorer

Mechanical Engineer, 4, 21–23.

By: C. Xu & J. Huan

Source: NC State University Libraries
Added: November 13, 2018

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.