Cheryl Xu Sultana, F., Yang, N., Xu, C., Monroe, J., & El-Ghannam, A. (2024). Synthesis and characterization of functionally graded SiC-mullite thermal material. JOURNAL OF SOLID STATE CHEMISTRY, 330. https://doi.org/10.1016/j.jssc.2023.124414 Yang, N., & Xu, C. (2023). An ultrathin polymer-derived UHTCs coating on CFRP substrate: Effective electromagnetic wave absorber. COMPOSITES COMMUNICATIONS, 43. https://doi.org/10.1016/j.coco.2023.101713 Wang, F., Ajayi, T., Vinod, K. N., Xu, C., & Fang, T. (2023). Impact and wetting of polysilazane droplets on a metal surface. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 677. https://doi.org/10.1016/j.colsurfa.2023.132328 Jia, Y., Yang, N., Xu, S., Snyder, A. D. D., Patrick, J. F. F., Kumar, R., … Xu, C. (2023). Polymer-derived SiOC reinforced with core-shell nanophase structure of ZrB2/ZrO2 for excellent and stable high-temperature microwave absorption (up to 900 degrees C). SCIENTIFIC REPORTS, 13(1). https://doi.org/10.1038/s41598-023-27541-3 Liu, X., Liu, H., Wu, H., Zhou, Q., Liang, H., Liu, G., … Riedel, R. (2023, April 22). Structural Electromagnetic Absorber Based on MoS2/PyC-Al2O3 Ceramic Metamaterials. SMALL, Vol. 4. https://doi.org/10.1002/smll.202300664 Yang, N., Zhang, X., Reynolds, L., Kumah, D., & Xu, C. (2023, January 24). The Role of Carbon Content: A Comparison of the Nickel Particle Size and Magnetic Property of Nickel/Polysiloxane-Derived Silicon Oxycarbide. ADVANCED ENGINEERING MATERIALS, Vol. 1. https://doi.org/10.1002/adem.202201453 Wang, S., Abbott, T. B., Fong, R.-Y., Xu, C., & Yuan, F.-G. (2023, August 30). Vibration-based hidden damage imaging using stereo cameras with digital image correlation. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, Vol. 8. https://doi.org/10.1177/14759217231191102 Kenion, T., Yang, N., & Xu, C. (2022). [Review of Dielectric and mechanical properties of hypersonic radome materials and metamaterial design: A review]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 42(1), 1–17. https://doi.org/10.1016/j.jeurceramsoc.2021.10.006 Pasagada, V. K. V., Yang, N., & Xu, C. (2022). Electron beam sintering (EBS) process for Ultra-High Temperature Ceramics (UHTCs) and the comparison with traditional UHTC sintering and metal Electron Beam Melting (EBM) processes. CERAMICS INTERNATIONAL, 48(7), 10174–10186. https://doi.org/10.1016/j.ceramint.2021.12.229 Yang, N., Xu, S., & Xu, C. (2022). Highly electromagnetic transparent ceramic composite made of boron nitride nanotubes and silicon oxynitride via perhydropolysilazane infiltration method. SCIENTIFIC REPORTS, 12(1). https://doi.org/10.1038/s41598-022-18563-4 Yang, N., Xu, S., Zhang, D., & Xu, C. (2022, December 15). Super-Wideband Electromagnetic Absorbing TiC/SiOC Ceramic/Glass Composites Derived from Polysiloxane and Titanium Isopropoxide with Low Thickness (<1 mm). ADVANCED ENGINEERING MATERIALS, Vol. 12. https://doi.org/10.1002/adem.202201508 Kulkarni, A., & Xu, C. (2021). A Deep Learning Approach in Optical Inspection to Detect Hidden Hardware Trojans and Secure Cybersecurity in Electronics Manufacturing Supply Chains. FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, 7. https://doi.org/10.3389/fmech.2021.709924 Jia, Y., Mehta, S. T., Li, R., Chowdhury, M. A. R., Horn, T., & Xu, C. (2021). Additive manufacturing of ZrB2-ZrSi2 ultra-high temperature ceramic composites using an electron beam melting process. CERAMICS INTERNATIONAL, 47(2), 2397–2405. https://doi.org/10.1016/j.ceramint.2020.09.082 Schrand, A. M., Kolel-Veetil, M., Elston, E., Neff, C., Ajayi, T., & Xu, C. (2021). Printable Materials for Additive Manufacturing in Harsh Earth and Space Environments. In M. L. Terranova & E. Tamburri (Eds.), Nanotechnology in Space. CRC Press - Taylor & Francis Group. Daniel, J., Nguyen, S., Chowdhury, M. A. R., Xu, S., & Xu, C. (2021). Temperature and Pressure Wireless Ceramic Sensor (Distance=0.5 Meter) for Extreme Environment Applications. SENSORS, 21(19). https://doi.org/10.3390/s21196648 Jia, Y., Chowdhury, M. A. R., & Xu, C. (2020). Complex impedance spectra of polymer-derived SiC annealed at ultrahigh temperature. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 103(12), 6860–6868. https://doi.org/10.1111/jace.17395 Jia, Y., Ajayi, T. D., & Xu, C. (2020). Dielectric properties of polymer-derived ceramic reinforced with boron nitride nanotubes. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 103(10), 5731–5742. https://doi.org/10.1111/jace.17301 Chowdhury, M. A., Wang, K., Jia, Y., & Xu, C. (2020). Electrical Conductivity and Structural Evolution of Polymer Derived SiC Ceramics Pyrolyzed From 1200°C to 1800°C. Journal of Micro and Nano-Manufacturing, 8(2). https://doi.org/10.1115/1.4046191 Jia, Y., Ajayi, T. D., Wahls, B. H., Ramakrishnan, K. R., Ekkad, S., & Xu, C. (2020). Multifunctional Ceramic Composite System for Simultaneous Thermal Protection and Electromagnetic Interference Shielding for Carbon Fiber-Reinforced Polymer Composites. ACS Applied Materials & Interfaces, 12(52), 58005–58017. https://doi.org/10.1021/acsami.0c17361 Jia, Y., Yang, J., Wang, K., Chowdhury, M. A. R., Chen, B., Su, Y., … Xu, C. (2019). Aligned carbon nanotube/carbon (CNT/C) composites with exceptionally high electrical conductivity at elevated temperature to 400 degrees C. MATERIALS RESEARCH EXPRESS, 6(11). https://doi.org/10.1088/2053-1591/ab4385 Ajayi, T., Kim, K., Liu, J., Nickerson, B., & Xu, C. (2019). Multifunctional Hybrid Composite for Thermal Protection of Carbon Fiber Reinforced Polymers (CFRPS) in Aerospace Applications. SAMPE 2019 - Charlotte, NC. Presented at the SAMPE 2019 - Charlotte, NC. https://doi.org/10.33599/nasampe/s.19.1367 Mousavinezhad, S., & Xu, C. (2019). Science and Engineering Courses, Theory and Practice: An Example. 2019 ASEE Annual Conference & Exposition Proceedings. Presented at the 2019 ASEE Annual Conference & Exposition, Tampa, Florida. https://doi.org/10.18260/1-2--33254 Mousavinezhad, S., Xu, C., & Tatar, E. (2019). Teaching and Learning of Electrical and Computer Engineering Courses with High Mathematical Contents. 2019 ASEE Annual Conference & Exposition Proceedings. Presented at the 2019 ASEE Annual Conference & Exposition, Tampa, Florida. https://doi.org/10.18260/1-2--33343 Jia, Y., Chowdhury, M. A. R., Zhang, D., & Xu, C. (2019). Wide-Band Tunable Microwave-Absorbing Ceramic Composites Made of Polymer-Derived SiOC Ceramic and in Situ Partially Surface-Oxidized Ultra-High-Temperature Ceramics. ACS APPLIED MATERIALS & INTERFACES, 11(49), 45862–45874. https://doi.org/10.1021/acsami.9b16475 Ju, L., Yang, J., Hao, A., Daniel, J., Morales, J., Nguyen, S., … Xu, C. (2018). A hybrid ceramic-polymer composite fabricated by co-curing lay-up process for a strong bonding and enhanced transient thermal protection. Ceramics International, 44(10), 11497–11504. https://doi.org/10.1016/j.ceramint.2018.03.211 Xu, C., & Daniel, J. (2018). Wireless Temperature Sensor for High Temperature Environments (up to 1000C) using RF Techniques with 0.5 meter Sensing Distance. Presented at the 41th Annual Conference on Composites, Materials, and Structures, Cocoa beach, FL. Xu, C., & Wang, K. (2017). Effect of Processing Conditions on Electric and Dielectric Properties of Polymer-Derived SiC Ceramics. Pittsburgh, PA: Materials Science & Technology. Fan, Z., Wang, K., Dong, X., Wang, R., Duan, W., Mei, X., … Xu, C. (2017). Enhanced cyclic oxidation resistance through the self-healing of segmented cracks using nano-Al2O3/Ni-20 wt%Al particles in laser re-melted thermal barrier coatings. Materials Letters, 201, 156–160. https://doi.org/10.1016/j.matlet.2017.04.116 Macdonald, J., & Xu, C. (2017). Metamaterial Enabling RF Transparency – Ceramic Composite Design for High Temperature Application. Presented at the National Space and Missile Materials Symposium, CA. Xu, C., & Peebles, J. (2017). Non-Destructive Testing of Composite Materials at High Temperature (2000oC). Presented at the Material Measurements Working Group, Dayton, OH. Daniel, J., Ju, L., Yang, J., Sun, X., Gupta, N., Schrand, A., & Xu, C. (2017). Pearl-Chain Formation of Discontinuous Carbon Fiber Under Electrical Field. Journal of Manufacturing and Materials Processing, 1(2), 22. https://doi.org/10.3390/jmmp1020022 Davis, B., Dabrow, D., Ju, L., Li, A., Xu, C., & Huang, Y. (2017). Study of Chip Morphology and Chip Formation Mechanism during Machining of Magnesium-Based Metal Matrix Composites. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 139(9). https://doi.org/10.1115/1.4037182 Davis, B., Dabrow, D., Ju, L., Li, A., Xu, C., & Huang, Y. (2017). Study of chip morphology and chip formation mechanism during machining of magnesium-based metal matrix composites. ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, 2. https://doi.org/10.1115/MSEC2017-3052 Qiao, Y., Liu, J., Jia, Y., Xu, C., An, L., & Bai, Y. (2017). Study on coexistence of brittle and ductile fractures in nano reinforcement composites under different loading conditions. International Journal of Fracture, 204(2), 205–224. https://doi.org/10.1007/s10704-016-0174-y Fan, Z., Wang, K., Dong, X., Wang, R., Duan, W., Mei, X., … Xu, C. (2017). The role of the surface morphology and segmented cracks on the damage forms of laser re-melted thermal barrier coatings in presence of a molten salt (Na2SO4 + V2O5). Corrosion Science, 115, 56–67. https://doi.org/10.1016/j.corsci.2016.11.011 Xu, C., Ajayi, T., & Morales, J. (2017). Thermal and Oxidation Stability of BNNT and BNNT Composites. Presented at the NASA Langley. Xu, C., & Daniel, J. (2017). Wireless Temperature Measurement Based on Radio Frequency (RF) Technology. Presented at the 40th Annual Conference on Composites, Materials, and Structures, Cocoa beach, FL. Yang, J., Dong, S., Webster, D., Gilmore, J., & Xu, C. (2016). Characterization and Alignment of Carbon Nanofibers under Shear Force in Microchannel. Journal of Nanomaterials, 2016. https://doi.org/10.1155/2016/1052478 Xu, C., & Mousavinezhad, S. (2016). Computer and Information Technology Tools in Signals & Systems. 2016 ASEE Annual Conference & Exposition Proceedings. Presented at the 2016 ASEE Annual Conference & Exposition. https://doi.org/10.18260/p.26552 Zhao, R., Shao, G., Li, N., Xu, C., & An, L. (2016). Development of a Wireless Temperature Sensor Using Polymer-Derived Ceramics. Journal of Sensors, 2016. https://doi.org/10.1155/2016/8624817 Fan, Z., Dong, X., Wang, K., Duan, W., Wang, R., Mei, X., … Xu, C. (2016). Effect of drilling allowance on TBC delamination, spatter and re-melted cracks characteristics in laser drilling of TBC coated superalloys. International Journal of Machine Tools and Manufacture, 106, 1–10. https://doi.org/10.1016/j.ijmachtools.2016.03.008 Bade, S. G. R., Li, J., Shan, X., Ling, Y., Tian, Y., Dilbeck, T., … Yu, Z. (2016). Fully Printed Halide Perovskite Light-Emitting Diodes with Silver Nanowire Electrodes. ACS Nano, 10(2), 1795–1801. https://doi.org/10.1021/acsnano.5b07506 Xu, C. (2016). High Conductive Ceramic Thin Film with Unique Mechanical Property. Presented at the Ceramic Expo, Cleveland, OH. Yang, J., Downes, R., Schrand, A., Park, J. G., Liang, R., & Xu, C. (2016). High electrical conductivity and anisotropy of aligned carbon nanotube nanocomposites reinforced by silicon carbonitride. Scripta Materialia, 124, 21–25. https://doi.org/10.1016/j.scriptamat.2016.06.023 Yang, J., Dong, S., & Xu, C. (2016). Mechanical response and microstructure of 2D carbon fiber reinforced ceramic matrix composites with SiC and Ti3SiC2fillers. Ceramics International, 42(2), 3019–3027. https://doi.org/10.1016/j.ceramint.2015.10.088 Zhu, G., Dong, S., Ni, D., Xu, C., & Wang, D. (2016). Microstructure, mechanical properties and oxidation resistance of SiCf/SiC composites incorporated with boron nitride nanotubes. RSC Advances, 6(86), 83482–83492. https://doi.org/10.1039/c6ra16496j Xu, C. (2016). Strong and Flexible Ceramic Composites with High In-Plane Thermal Conductivity for Hypersonic Applications. Presented at the Air Force Research Lab (AFRL), Eglin, FL. Yang, J., Downes, R., Yu, Z., Park, J. G., Liang, R., & Xu, C. (2016). Strong and ultra-flexible polymer-derived silicon carbonitride nanocomposites by aligned carbon nanotubes. Ceramics International, 42(12), 13359–13367. https://doi.org/10.1016/j.ceramint.2016.05.078 Xu, C., Wentworth, S., & Mousavinezhad, H. (2016). Teaching and Learning of Engineering Topics with Software Tools. Presented at the ASEE Annual Conference & Exposition. ASEE Annual Conference & Exposition, New Orleans, CA. Xu, C., & Yang, J. (2016). Three-Dimensional Multi-Reinforced Ceramic Composites with Enhanced Through-Thickness Thermal Conductivity. Presented at the 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC-9), Toronto, Canada. Yang, J., Sprengard, J., Ju, L., Hao, A., Saei, M., Liang, R., … Xu, C. (2016). Three-dimensional-linked carbon fiber-carbon nanotube hybrid structure for enhancing thermal conductivity of silicon carbonitride matrix composites. Carbon, 108, 38–46. https://doi.org/10.1016/j.carbon.2016.07.002 Pan, H., Liu, J., Choi, Y., Xu, C., Bai, Y., & Atkins, T. (2016). Zones of material separation in simulations of cutting. International Journal of Mechanical Sciences, 115-116, 262–279. https://doi.org/10.1016/j.ijmecsci.2016.06.019 Xu, C. (2015). Ceramic Matrix Composites (CMCs) with High Volume Fractions of Reinforcements (up to 60 Vol.%) and Ensuring 3-Dimensional Bonding Strength. Presented at the Workshop on Carbon Fiber and their Composite, Oak Ridge, TN. Xu, C., & Mousavinezhad, S. H. (2015). Computer-aided design (CAD) of recursive/non-recursive filters. ASEE Annual Conference and Exposition, Conference Proceedings, 122nd ASEE Annual Conference and Exposition: Making Value for Society(122nd ASEE Annual Conference and Exposition: Making Value for Society). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84941994086&partnerID=MN8TOARS Xu, C., Yang, J., L., J., Jiang, Z., & Wang, H. (2015). Effective Nano-Infiltration to Make Fully-Densed Ceramic Composites with A High Volume Fraction of Reinforcements. Presented at the 39th International Conference and Expo on Advanced Ceramics and Composites, Daytona, FL. Xu, C. (2015). Flexible Ceramic Composites with High In-Plane Thermal Conductivity. Presented at the Air Force Research Lab (AFRL) at Eglin, FL. Yang, J., Xu, C., Ju, L., Downes, R., Hao, A., & Liang, R. (2015). Flexible Ceramic Matrix Composite with High Strength and Conductive by Aligned CNTs. Presented at the 39th International Conference and Expo on Advanced Ceramics and Composites, Daytona, FL. Xu, C. (2015). Flexible Ceramic Thin Film with High Conductivity. Presented at the Defense Manufacturing Conference, Phoenix, AZ. Xu, C. (2015). Multifunctional Flexible Ceramic Membranes. Naval Science and Technology – Future Force, 2, 26. Liu, J., Bai, Y., & Xu, C. (2014). Evaluation of ductile fracture models in finite element simulation of metal cutting processes. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 136(1). https://doi.org/10.1115/1.4025625 Cheng, H., Shao, G., Ebadi, S., Ren, X., Harris, K., Liu, J., … Gong, X. (2014). Evanescent-mode-resonator-based and antenna-integrated wireless passive pressure sensors for harsh-environment applications. Sensors and Actuators, A: Physical, 220, 22–33. https://doi.org/10.1016/j.sna.2014.09.010 Liu, J., Li, J., & Xu, C. (2014). Interaction of the cutting tools and the ceramic-reinforced metal matrix composites during micro-machining: A review. CIRP Journal of Manufacturing Science and Technology, 7(2), 55–70. https://doi.org/10.1016/j.cirpj.2014.01.003 Yang, J., & Xu, C. (2014). Optimization of Carbon Nanofibers Alignment Induced by Shear Force. Presented at the 38th International Conference and Exposition on Advanced Ceramics and Composites, Daytona, FL. Ji, Y., & Xu, C. (2014). Sliding Mode Control of Feed Drive System for a Three-axis Micro-Machining Platform with Nano-Resolution. Journal of Control Engineering and Technology, 4(1), 29–36. Zhao, R., Shao, G., Cao, Y., An, L., & Xu, C. (2014). Temperature sensor made of polymer-derived ceramics for high-temperature applications. Sensors and Actuators, A: Physical, 219, 58–64. https://doi.org/10.1016/j.sna.2014.08.012 Zhao, R., & Xu, C. (2013). Analytical modeling and experimental validation of force ripple and friction force for general direct drive systems. ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013, 2. https://doi.org/10.1115/MSEC2013-1058 Liu, J., Li, J., & Xu, C. (2013). Cutting force prediction on micromilling magnesium metal matrix composites with nanoreinforcements. Journal of Micro and Nano-Manufacturing, 1(1). https://doi.org/10.1115/1.4023286 Lojewski, B., Yang, W., Duan, H., Xu, C., & Deng, W. (2013). Design, fabrication, and characterization of linear multiplexed electrospray atomizers micro-machined from metal and polymers. Aerosol Science and Technology, 47(2), 146–152. https://doi.org/10.1080/02786826.2012.734936 Li, J., Liu, J., Liu, J., Ji, Y., & Xu, C. (2013). Experimental investigation on the machinability of SiC nano-particles reinforced magnesium nanocomposites during micro-milling processes. International Journal of Manufacturing Research, 8(1), 64–84. https://doi.org/10.1504/IJMR.2013.051840 Shao, G., Freese, D., Xu, C., & An, L. (2013). Polymer Derived Ceramic Sensors for Ultra-High Temperature Application. Presented at the 37th International Conference and Exposition on Advanced Ceramics and Composites, Combustion Institute, Daytona, FL. Freese, D., Shao, G., & Xu, C. (2013). Polymer-derived ceramic sensors for temperature measurement in harsh environment. Proceedings of the ASME Turbo Expo, 4. https://doi.org/10.1115/GT2013-96031 Xu, C., & Shin, Y. C. (2012). A multilevel fuzzy control design for a class of multiinput single-output systems. IEEE Transactions on Industrial Electronics, 59(8), 3113–3123. https://doi.org/10.1109/TIE.2011.2158033 Shao, G., Zhao, G., Yang, F., Xu, C., & An, L. (2012). Ceramic nanocomposites reinforced with a high volume fraction of carbon nanofibers. Materials Letters, 68, 108–111. https://doi.org/10.1016/j.matlet.2011.10.031 Ji, Y., Hernandez, M., Giesecke, D., Bartles, D., & Xu, C. (2012). Tool Wear Analysis Using Wavelet Transform Based Cutting Force and Acoustic Emission. Journal of Aviation and Aerospace Perspective, 2(2), 35–54. Gong, X., An, L., & Xu, C. (2012). Wireless passive sensor development for harsh environment applications. 2012 IEEE International Workshop on Antenna Technology, iWAT 2012, 140–143. https://doi.org/10.1109/IWAT.2012.6178418 Xu, C., & Shin, Y. C. (2011). A self-tuning fuzzy controller for a class of multi-input multi-output nonlinear systems. Engineering Applications of Artificial Intelligence, 24(2), 238–250. https://doi.org/10.1016/j.engappai.2010.10.021 An, L., Qu, J., Luo, J., Fan, Y., Zhang, L., Liu, J., … Blau, P. J. (2011). Aluminum nanocomposites having wear resistance better than stainless steel. Journal of Materials Research, 26(19), 2479–2483. https://doi.org/10.1557/jmr.2011.263 Deane, E., Hernandez, M., Giesecke, D., Meanor, M., Collins, S., Ji, Y., & Xu, C. (2011). Analysis of a simultaneous CNC turning and boring operation via multisensor monitoring. ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011, 2, 273–280. https://doi.org/10.1115/MSEC2011-50168 Liu, J., Li, J., Shao, G., Ji, Y., Xu, C., & An, L. (2011). Investigation of Micro-End-Milling of Polymer-Derived Ceramics for High Temperature Micro-Sensor Fabrication. Presented at the NSF CMMI Engineering Research and Innovation Conference, Atlanta, GA. Liu, J., Li, J., Ji, Y., & Xu, C. (2011). Investigation on the effect of SiC nanoparticles on cutting forces for micro-milling Magnesium Matrix Composites. ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011, 2, 525–536. https://doi.org/10.1115/MSEC2011-50170 Ji, Y., Zhao, R., & Xu, C. (2011). Modeling and control of feed drive system for a micro-machining platform with nano-resolution. ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control, DSCC 2011, 1, 263–270. https://doi.org/10.1115/DSCC2011-6026 Gong, X., An, L., & Xu, C. (2011). Recent Advances on Wireless Passive High-Temperature Sensors for Harsh Environments. Presented at the 35th International Conference and Exposition on Advanced Ceramics and Composites, Composite Institute, Daytona, FL. Chen, Y., Li, C., Wang, Y., Zhang, Q., Xu, C., Wei, B., & An, L. (2011). Self-assembled carbon-silicon carbonitride nanocomposites: High-performance anode materials for lithium-ion batteries. Journal of Materials Chemistry, 21(45), 18186–18190. https://doi.org/10.1039/c1jm13733f Yu, Y., Yang, X., Xu, C., Fang, J., & An, L. (2011). Synthesis of nanostructured silicon carbide at ultralow temperature using self-assembled polymer micelles as a precursor. Journal of Materials Chemistry, 21(44), 17619–17622. https://doi.org/10.1039/c1jm13973h Yu, Y., Chen, Y., Xu, C., Fang, J., & An, L. (2011). Synthesis of spherical non-oxide silicon carbonitride ceramic particles. Journal of the American Ceramic Society, 94(9), 2779–2782. https://doi.org/10.1111/j.1551-2916.2011.04713.x Liu, J., Xu, C., & Jackson, M. (2011). Traditional and non-traditional control techniques for grinding processes. In Machining with Abrasives (pp. 269–302). https://doi.org/10.1007/978-1-4419-7302-3_6 Liu, J., Li, J., Grummel, B., Xu, C., & Shen, J. (2010). A Contactless Polymer Derived Ceramic Temperature Sensing System for Turbine Applications. Presented at the Annual Technical Symposium, Florida Center for Advanced AeroPropulsion. Idahosa, U., Saha, A., Khatami, N., Xu, C., & Basu, S. (2010). Acoustic perturbation effects on the fluid dynamics and swirling flame response in a non-premixed co-flow burner. Proceedings of the ASME Turbo Expo, 2(PARTS A AND B), 1309–1321. https://doi.org/10.1115/GT2010-23735 Shao, G., Xu, C., & An, L. (2010). Carbon Nanofiber Reinforced Polymer Derived Ceramic Nanocomposites. Presented at the Materials Science & Technology (MS&T'10), Houston, TX. Joslin, A., Hernandez, M., Collins, S., Giesecke, D., Ji, Y., & Xu, C. (2010). Experimental Setup for Multi-sensor Fusion and Data Correlation Analysis during CNC Steel Turning Process. Presented at the ASME International Manufacturing Science and Engineering Conference, Erie, PA. Joslin, A., Hernandez, M., Deane, E., Collins, S., Xu, C., & Wilson, D. F. (2010). Experimental setup for multi-sensor fusion and data correlation analysis during CNC steel turning process. ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, 1, 461–467. https://doi.org/10.1115/MSEC2010-34308 Yang, M., Xu, C., Wu, C., Lin, K.-C., Chao, Y. J., & An, L. (2010). Fabrication of AA6061/Al2O3nano ceramic particle reinforced composite coating by using friction stir processing. Journal of Materials Science, 45(16), 4431–4438. https://doi.org/10.1007/s10853-010-4525-1 Yang, W., Gao, F., Xu, C., Wei, G., & An, L. (2010). Fabrication of Si3N4/SiC nanocomposites toughened by in-situ formed low-dimensional nanostructures. Solid State Sciences, 12(9), 1692–1695. https://doi.org/10.1016/j.solidstatesciences.2010.07.013 Li, J., Liu, J., & Xu, C. (2010). Machinability study of SiC nano-particles reinforced Magnesium nanocomposites during micro-milling processes. ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, 2, 391–398. https://doi.org/10.1115/MSEC2010-34294 Jiang, T., Hill, A., Fei, W., Wei, Y., Tellam, M., Xu, C., & An, L. (2010). Making bulk ceramics from polymeric precursors. Journal of the American Ceramic Society, 93(10), 3017–3019. https://doi.org/10.1111/j.1551-2916.2010.04069.x Liu, J., Xu, C., & An, L. (2010). Micro-machinable polymer-derived ceramic sensors for high-temperature applications. In M. Tomizuka (Ed.), Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2010 (Vol. 7647). https://doi.org/10.1117/12.848529 Idahosa, U., Saha, A., Xu, C., & Basu, S. (2010). Non-premixed acoustically perturbed swirling flame dynamics. Combustion and Flame, 157(9), 1800–1814. https://doi.org/10.1016/j.combustflame.2010.05.008 Tang, Y., & Xu, C. (2010). Online Tool Deflection Compensation in End Milling of Curved Workpiece. International Journal of Electronics, Computing and Engineering Education, 1(1), 23–28. Sarkar, S., Zou, J., Liu, J., Xu, C., An, L., & Zhai, L. (2010). Polymer-derived ceramic composite fibers with aligned pristine multiwalled carbon nanotubes. ACS Applied Materials and Interfaces, 2(4), 1150–1156. https://doi.org/10.1021/am1000085 Allen, R., Lin, K.-C., & Xu, C. (2010). Robust estimation of a maneuvering target from multiple unmanned air vehicles' measurements. 2010 International Symposium on Collaborative Technologies and Systems, CTS 2010, 537–545. https://doi.org/10.1109/CTS.2010.5478465 Sarkar, S., Zou, J., Xu, C., An, L., & Zhai, L. (2010). SiCN ceramic fibers with aligned carbon nanotubes. International SAMPE Symposium and Exhibition (Proceedings). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-78649483096&partnerID=MN8TOARS Joslin, A. J., & Xu, C. (2009). A hybrid modeling technique for partially-known systems using linear regression and neural network. Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009, 2, 365–375. https://doi.org/10.1115/MSEC2009-84217 Jackson, M. J., Xu, C., & Ahmed, W. (2009). A multifunctional high-speed spindle for micromachining medical materials. International Journal of Nano and Biomaterials, 2(6), 520–539. https://doi.org/10.1504/IJNBM.2009.028341 Xu, C., & Shin, Y. C. (2009). A stable hierarchical fuzzy control design for certain non-linear systems based on input-output passivity theory. Control and Intelligent Systems, 37(2), 103–113. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-69949109741&partnerID=MN8TOARS Tang, Y., Xu, C., & Jackson, M. J. (2009). Adaptive compensation of tool deflection in micromilling processes. International Journal of Nanomanufacturing, 3(1-2), 159–168. https://doi.org/10.1504/IJNM.2009.027056 Idahosa, U., Saha, A., Xu, C., & Basu, S. (2009). Characterization of combustion dynamics in swirl stabilized flames. American Society of Mechanical Engineers, Power Division (Publication) PWR, 517–531. https://doi.org/10.1115/POWER2009-81168 Jackson, M. J., Whitfield, M. D., Xu, C., & Ahmed, W. (2009). Diamond coated microtools for machining compact bone. International Journal of Nano and Biomaterials, 2(6), 505–519. https://doi.org/10.1504/IJNBM.2009.028340 Nicholson, D., Liu, J., Qiu, S., Mak, A., Trinh, J., Xu, C., & Vaidyanathan, R. (2009). Fabrication and Thermo-Mechanical Testing of a High Temperature Shape Memory Alloy Helical Actuator. Presented at the Annual Technical Symposium, Florida Center for Advanced AeroPropulsion. Idahosa, U., Abhishek, S., Joslin, A., Basu, S., & Xu, C. (2009). Flame Response to Equivalence Ratio Oscillations in Perturbed Swirl Stabilized Flames. ASME Turbo Expo 2009 - Combustion Dynamics. Presented at the ASME Turbo Expo 2009 - Combustion Dynamics., Orlando, FL. Jackson, M. J., Evans, J., Xu, C., & Ahmed, W. (2009). Formation of Nanostructured Metals. In Machining with Nanomaterials. Springer. Idahosa, U., Saha, A., Xu, C., & Basu, S. (2009). Frequency Response Characterization of Swirl Stabilized Flames Dynamics. Proceedings of the 6th US National Combustion Meeting of the Combustion Institute. Presented at the 6th US National Combustion Meeting of the Combustion Institute, Ann Arbor, MI. Jackson, M. J., Ahmed, W., & Xu, C. (2009). Fundamentals of Machining. In Machining with Nanomaterials. Springer. Shamieh, F., & Xu, C. (2009). Generation of optimal functions using particle swarm method over discrete intervals. Annual Conference of the North American Fuzzy Information Processing Society - NAFIPS. https://doi.org/10.1109/NAFIPS.2009.5156484 Tang, Y., Xu, C., & Jackson, M. (2009). Geometrical adaptive controller for tool deflection compensation in helical end milling processes. Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009, 2, 377–383. https://doi.org/10.1115/MSEC2009-84218 Idahosa, U., Khatami, N., Saha, A., Xu, C., & Basu, S. (2009). On the fluid dynamics of acoustically perturbed non-premixed swirling flames. Fall Meeting of the Eastern States Section of the Combustion Institute 2009, 720–725. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84946594823&partnerID=MN8TOARS Xu, C. (2009). Persistence, Consistence and Patience. In Tips on Getting an Academic Position. Lulu Web. Xu, C., Tang, Y., & Jackson, M. J. (2009). Survey on various control techniques in micro grinding processes. International Journal of Nanomanufacturing, 3(4), 398–408. https://doi.org/10.1504/IJNM.2009.027503 Xu, C., & Shin, Y. C. (2008). A fuzzy inverse model construction method for general monotonic multi-input-single-output (MISO) systems. IEEE Transactions on Fuzzy Systems, 16(5), 1216–1231. https://doi.org/10.1109/TFUZZ.2008.924336 Xu, C., & Shin, Y. C. (2008). A multi-level fuzzy control design for general nonlinear multi-input single-output systems. Annual Conference of the North American Fuzzy Information Processing Society - NAFIPS. https://doi.org/10.1109/NAFIPS.2008.4531229 Xu, C., Tang, Y., & Jackson, M. (2008). Adaptive Control of Cutting Force to Compensate Tool Deflection during Micro-Milling Processes. Presented at the 6th International Workshop on Microfactories, Evanston, IL. Xu, C., & Shin, Y. C. (2008). An adaptive fuzzy controller for constant cutting force in end-milling processes. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 130(3), 0310011–03100110. https://doi.org/10.1115/1.2823070 R., A., & Xu, C. (2008). Cooperative Navigation and Adaptive Guidance. The Bulletin of Military Operations Research: Phalanx, 41(4), 12–17. Xu, C., Knipe, K., & Jackson, M. (2008). Finite Element Modeling and Vibration Control of a Tetraform Space Frame for Micro-Machining Processes. Presented at the 6th International Workshop on Microfactories, Evanston, IL. Knipe, K., Xu, C., & Jackson, M. J. (2008). Finite element modelling and vibration control of a tetrahedral space frame applied to micromachining. International Journal of Nano and Biomaterials, 1(4), 448–458. https://doi.org/10.1504/IJNBM.2008.022872 Shin, Y. C., & Xu, C. (2008). Intelligent Systems: Modeling, Optimization and Control. In Intelligent Systems: Modeling, Optimization, and Control (pp. 1–433). https://doi.org/10.1201/9781420051773 Xu, C., & Shin, Y. C. (2007). A fuzzy inverse model construction method for a general MISO system with a monotonie input-output relationship. Annual Conference of the North American Fuzzy Information Processing Society - NAFIPS, 1–6. https://doi.org/10.1109/NAFIPS.2007.383801 Xu, C., & Shin, Y. C. (2007). Control of cutting force for creep-feed grinding processes using a multi-level fuzzy controller. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 129(4), 480–492. https://doi.org/10.1115/1.2718238 Xu, C. (2007). Intelligent Control System for Manufacturing Processes. Presented at the North American Manufacturing Research Conference (NAMRC), Ann Arbor, MI. Xu, C., & Shin, Y. C. (2007). Interaction analysis for MIMO nonlinear systems based on a fuzzy basis function network model. Fuzzy Sets and Systems, 158(18), 2013–2025. https://doi.org/10.1016/j.fss.2007.02.012 Xu, C., & Shin, Y. C. (2006). A Hierarchical Self-tuning Fuzzy Controller for General Nonlinear Systems with Stability Analysis. Presented at the 3rd International Conference on Cybernetics and Information Technologies Systems and Applications, Orlando, FL. Xu, C., & Shin, Y. C. (2006). Adaptive Control of Cutting Force for End Milling Processes with System Variation using Self-tuning Fuzzy Technique. Presented at the ASME International Mechanical Engineering Congress and Exposition, Chicago, IL. Xu, C., & Shin, Y. C. (2006). An adaptive fuzzy controller for constant cutting force in end-milling processes. American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) DSC. https://doi.org/10.1115/IMECE2006-13758 Xu, C., & Shin, Y. C. (2005). Design of a multilevel fuzzy controller for nonlinear systems and stability analysis. IEEE Transactions on Fuzzy Systems, 13(6), 761–778. https://doi.org/10.1109/TFUZZ.2005.859308 Xu, C., & Huan, J. (2001). An Automatic Monitoring System on the Fault Diagnosis of NC machine Based on Internet Explorer. Mechanical Engineer, 4, 21–23.