Thomas Dow

Sultana, N., Gunning, S., Furst, S. J., Garrard, K. P., Dow, T. A., & Vinueza, N. R. (2018). Direct analysis of textile dyes from trace fibers by automated microfluidics extraction system coupled with Q-TOF mass spectrometer for forensic applications. Forensic Science International, 289, 67–74. https://doi.org/10.1016/J.FORSCIINT.2018.05.020

Bodlapati, C., Dow, T., Wong, A., & Garrard, K. (2018). Surface Finish and Diamond Tool Wear when machining PMMA and PC Optics. OPTICAL MANUFACTURING AND TESTING XII, Vol. 10742. https://doi.org/10.1117/12.2319683

Furst, S., Dow, T., Garrard, K., Sohn, A., Fixsen, D., Rinehart, S., … Dhabal, A. (2016). Design and validation of the mounting structure for BETTII balloon-based telescope with thin-walled optics. JOURNAL OF ASTRONOMICAL TELESCOPES INSTRUMENTS AND SYSTEMS, 2(2). https://doi.org/10.1117/1.jatis.2.2.024001

Dow, T. A., Nowak, J., & Kessing, J. R. (2016). Design of elliptically-vibrating ultrasonic actuator for nanocoining. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 45, 301–310. https://doi.org/10.1016/j.precisioneng.2016.03.007

Dhabal, A., Rinehart, S. A., Rizzo, M. J., Mundy, L., Fixsen, D., Sampler, H., … Tucker, C. (2016). Optics of Balloon Experimental Twin Telescope for Infrared Interferometry (BETTII): delay lines and alignment. OPTICAL AND INFRARED INTERFEROMETRY AND IMAGING V, Vol. 9907. https://doi.org/10.1117/12.2230218

Zdanowicz, E., Dow, T. A., Scattergood, R. O., & Youssef, K. (2013). Nanostructure fabrication on germanium and silicon by nanocoining imprint technique. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 37(4), 871–879. https://doi.org/10.1016/j.precisioneng.2013.05.004

Lane, B. M., Dow, T. A., & Scattergood, R. (2013). Thermo-chemical wear model and worn tool shapes for single-crystal diamond tools cutting steel. WEAR, 300(1-2), 216–224. https://doi.org/10.1016/j.wear.2013.02.012

Zdanowicz, E., Dow, T. A., & Scattergood, R. O. (2012). Rapid fabrication of nanostructured surfaces using nanocoining. NANOTECHNOLOGY, 23(41). https://doi.org/10.1088/0957-4484/23/41/415303

Robichaud, G., Dixon, R. B., Potturi, A. S., Cassidy, D., Edwards, J. R., Sohn, A., … Muddiman, D. C. (2011). Design, modeling, fabrication, and evaluation of the air amplifier for improved detection of biomolecules by electrospray ionization mass spectrometry. INTERNATIONAL JOURNAL OF MASS SPECTROMETRY, 300(2-3), 99–107. https://doi.org/10.1016/j.ijms.2010.04.006

Furst, S. J., Dow, T. A., Garrard, K., & Sohn, A. (2010). Automated Part Centering With Impulse Actuation. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 132(1). https://doi.org/10.1115/1.4000681

Shi, M., Lane, B., Mooney, C. B., Dow, T. A., & Scattergood, R. O. (2010). Diamond tool wear measurement by electron-beam-induced deposition. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 34(4), 718–721. https://doi.org/10.1016/j.precisioneng.2010.03.009

Lane, B. M., Shi, M., Dow, T. A., & Scattergood, R. (2010). Diamond tool wear when machining Al6061 and 1215 steel. Wear, 268(11-12), 1434–1441. https://doi.org/10.1016/j.wear.2010.02.019

Brehl, D. E., & Dow, T. A. (2008). Review of vibration-assisted machining. Precision Engineering, 32(3), 153–172. https://doi.org/10.1016/j.precisioneng.2007.08.003

Brehl, D. E., & Dow, T. A. (2008). [Review of Review of vibration-assisted machining]. Precision Engineering, 32(3), 153–172.

Dow, T. A. (2006). Friction brakes. In H. A. Rothbart & T. H. Brown Jr. (Eds.), Mechanical design handbook: measurement, analysis, and control of dynamic sysytems. New York, NY: McGraw-Hill.

Dow, T. A. (2006). Friction clutches. In H. A. Rothbart & T. H. Brown Jr. (Eds.), Mechanical design handbook: measurement, analysis, and control of dynamic sysytems. New York, NY: McGraw-Hill.

Sohn, A., Garrard, K. P., & Dow, T. A. (2005). Polar coordinate-based profilometer and methods. Washington, DC: U.S. Patent and Trademark Office.

Dow, T. A., Miller, E. L., & Garrard, K. (2004). Tool force and deflection compensation for small milling tools. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 28(1), 31–45. https://doi.org/10.1016/S0141-6359(03)00072-2

Jared, B. H., & Dow, T. A. (2001). Investigation of the direction of chip motion in diamond turning. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 25(2), 155–164. https://doi.org/10.1016/S0141-6359(00)00070-2

Miller, M. H., & Dow, T. A. (1999). Influence of the grinding wheel in the ductile grinding of brittle materials: Development and verification of kinematic based model. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 121(4), 638–646. https://doi.org/10.1115/1.2833087

Arcona, C., & Dow, T. A. (1998). An empirical tool force model for precision machining. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 120(4), 700–707. https://doi.org/10.1115/1.2830209

Cuttino, J. F., & Dow, T. A. (1997). Contact between elastic bodies with an elliptic contact interface in torsion. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 64(1), 144–148. https://doi.org/10.1115/1.2787265

Jared, B. H., Dow, T. A., Garrard, K. P., Moorefield, G. M., Barnes, C., Day, R. D., … Rivera, G. (1997, July). Fabrication of hydrodynamic instability targets. FUSION TECHNOLOGY, Vol. 31, pp. 501–503. https://doi.org/10.13182/FST97-A30810

Dow, T. A., Garrad, K. P., Moorefield, G. M., & Taylor, L. W. (1995). Apparatus and method for forming a workpiece surface into a non-rotationally symmetric shape. Washington, DC: U.S. Patent and Trademark Office.