Jeffrey W Eischen

How Schwarzschild could have discovered and fixed the problem with his metric

PHYSICS ESSAYS, 37(1), 74–79.

Trajectory of a Spacecraft When It Passes by a Gravitational Body During Interstellar Travel

Silverberg, L. M., & Eischen, J. W. (2023, September 8). JOURNAL OF SPACECRAFT AND ROCKETS, Vol. 9.

Theory of spacetime impetus

Physics Essays, 34(4), 548–563.

Failure analysis of fretting fracture in frame rails of heavy duty trucks - Case study

ENGINEERING FAILURE ANALYSIS, 113.

On a new field theory formulation and a space-time adjustment that predict the same precession of Mercury and the same bending of light as general relativity

PHYSICS ESSAYS, 33(4), 489–512.

Failure analysis of mixed mode crack growth in heavy duty truck frame rail

Case Studies in Engineering Failure Analysis, 5-6, 67–74.

Particle- and crack-size dependency of lithium-ion battery materials LiFePO₄

AIMS Materials Science, 3(1), 190–203.

Enhancing accuracy of drape simulation. Part I: Investigation of drape variability via 3D scanning

JOURNAL OF THE TEXTILE INSTITUTE, 99(3), 211–218.

Enhancing accuracy of drape simulation. Part II: Optimized drape simulation using industry-specific software

JOURNAL OF THE TEXTILE INSTITUTE, 99(3), 219–226.

Finite element modeling of the left atrium to facilitate the design of an endoscopic atrial retractor

JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 129(6), 825–837.

Special issue - Ninth Pan American Congress of Applied Mechanics - Preface

Eischen, J. W., & Monsivais, G. (2007, October). JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES, Vol. 2, pp. 1395–1395.

A Study of the Relationship Between Buckling and Wrinkling of Membranes

Proceedings of the Ninth Pan American Congress of Applied Mechanics. Presented at the Ninth Pan American Congress of Applied Mechanics, Merida, Yucatan, Mexico.

Optimal Pick-up Locations for Transport and Handling of Limp Materials

Proceedings of the Eighth Pan American Congress of Applied Mechanics. Presented at the Eighth Pan American Congress of Applied Mechanics, Havana, Cuba.

The design and characterization of a novel piezoelectric transducer-based linear motor

IEEE-ASME TRANSACTIONS ON MECHATRONICS, 9(2), 392–398.

The design, fabrication, and characterization of millimeter scale motors for miniature direct drive robots

IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004, 4668–4673.

Design and Analysis of Press and Shrink Fit Joints

Proceedings of the American Society for Precision Engineering Conference. Portland, OR.

Optimal pick-up locations for transport and handling of limp materials - Part I: One-dimensional strips

TEXTILE RESEARCH JOURNAL, 73(9), 787–796.

Optimal pick-up locations for transport and handling of limp materials - Part II: Two-dimensional parts

TEXTILE RESEARCH JOURNAL, 73(10), 867–874.

Laser Scribing for Use as a Precision Shaping Technique

Proceedings of the Seventh Pan American Congress of Applied Mechanics. Temuco, Chile.

Bending Deflections Due to Scribe-Induced Residual Stress

Proceedings of the American Society for Precision Engineering Conference. Presented at the American Society for Precision Engineering Conference, Scottsdale, AZ.

Collision Detection in Cloth Modeling

In A. K. Peters (Ed.), Cloth Modeling and Animation.

Continuum Versus Particle Representations

In D. House & D. E. Breen (Eds.), Cloth modeling and animation. Natick, Massachusetts: A.K. Peters.

Optimal Pickup Locations for Fabric Handling

Mechanics in biology : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida. Presented at the ASME 2000 International Mechanical Engineering Congress and Exposition, Orlando, Florida.

Multidiscipline Analysis of a Fatal LPG Tank Rupture

Proceedings of the 53rd Meeting of the Society for Machinery Failure Prevention Technology. Presented at the Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach, VA.

The Mechanics of Removing Staple Crimp

Bauer-Kurz, I., & Eischen, J. W. (1999, July 4). Presented at the Gordon Research Conference, New London, NH.

A study of solutions for the anisotropic plate subjected to a concentrated force

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 65(1), 273–276.

Computer Modeling of Fabric Drape

Proceedings of the 35th Annual Society of Engineering Science Conference. Presented at the 35th Annual Society of Engineering Science Conference, Pullman, WA.

Drape Modeling of Cloth

Course 31- Cloth and Clothing in Computer Graphics. Short Course notes presented at the 1998 SIGGRAPH Computer Graphics Conference.

On control and optimization of elastic multilink mechanisms

COMPUTERS & STRUCTURES, 67(6), 483–502.

Optimum Manipulation Strategies for Limp Fabric Materials

Proceedings of the Fifth Pan American Congress of Applied Mechanics Conference. Presented at the Fifth Pan American Congress of Applied Mechanics Conference, San Juan, Puerto Rico.

Residual stress analysis of bimaterial strips under multiple thermal loading

JOURNAL OF ELECTRONIC PACKAGING, 119(4), 281–287.

Finite-element modeling and control of flexible fabric parts

IEEE COMPUTER GRAPHICS AND APPLICATIONS, 16(5), 71–80.

Thermal Loading of Bimaterial BeamsElastic Plastic Response

Proceedings of the XVIII Southeastern Conference on Theoretical and Applied Mechanics. Presented at the XVIII Southeastern Conference on Theoretical and Applied Mechanics, Tuscaloosa, AL.

Determining Elastic Behavior of Composites by the Boundary Element Method

Proceedings of the Fourth Pan American Congress of Applied Mechanics. Presented at the Fourth Pan American Congress of Applied Mechanics, Buenos Aires, Argentina.

Automated Apparel Processing: Computer Simulation of Fabric Deformation for the Design of Equipment

International Journal of Clothing Science and Technology, 6(5), 30–38.

Determining elastic behavior of composites by the boundary element method

Journal of Applied Physics, 74(1), 159–170.

Elastic Plastic Analysis of Bimaterial Beams with Strain Hardening

Proceedings of the 1993 ASME Design Technical Conference. Presented at the 1993 ASME Design Technical Conference, Albuquerque, NM.

Elastic Plastic Analysis of Bimaterial Beams with Strain Hardening-Multiple Yield Sites

Proceedings of the 1993 ASME International Electronic Packaging Conference. Presented at the 1993 ASME International Electronic Packaging Conference, Binghampton, NY.

Optimization of Fabric Manipulation During Pick/Place Operations

Proceedings of the 4th Annual Academic Apparel Research Conference. Presented at the 4th Annual Academic Apparel Research Conference, Raleigh, NC.

Optimization of Fabric Manipulation during Pick/Place Operations

International Journal of Clothing Science and Technology, 5(3/4), 68–76.

Simulation of Fabric Draping and Manipulation with Arbitrary Contact Surfaces and Adaptive Meshing

Proceedings of the 4th Annual Academic Apparel Research Conference. Presented at the 4th Annual Academic Apparel Research Conference, Raleigh, NC.

Fabric Mechanics Analysis Using Large Deformation Shell Theory

Proceeding of the 3rd Annual Academic Apparel Research Conference. Presented at the 3rd Annual Academic Apparel Research Conference, Atlanta, GA.

Slewing Motion Control of a Very Flexible Elastic Beam

Journal of Applied Mechanics, 59(3), 684–687.

The Problem of Helicopter and Aircraft Wire Strike Accidents

Proceedings of the 4th International Conference on Structural Failure, Product Liability and Technical Insurance. Presented at the 4th International Conference on Structural Failure, Product Liability and Technical Insurance, Vienna, Austria.

Effect of Geometric Nonlinearities on Crack Tip Deformations

Proceedings of the Pan American Congress of Applied Mechanics. Presented at the Pan American Congress of Applied Mechanics, Valparaiso, Chile.

Free Edge Stress Singularities in Electronic Bimaterials- Nonlinear Material Response

Proceedings of the Symposium on Structural Analysis in Microelectronics. Presented at the ASME Winter Annual Meeting, Atlanta, GA.

The Singularity at an Interface Between Bilinear Materials

International Journal of Solids and Structures, 28(1).

Computer Simulation of the Large Motions of Fabric Structures

Proceedings of the XV Southeastern Conference on Theoretical and Applied Mechanics. Presented at the XV Southeastern Conference on Theoretical and Applied Mechanics, Atlanta, GA.

Indirect Measurement of the Moment-Curvature Relationship for Fabrics

Textile Research Journal, 60(9), 525–533.

Multi-Rigid-Body Kinematic Analysis with Elastic Finite Elements

Proceedings of the 1990 ASME International Computers in Engineering Conference, II.

Realistic Modeling of Edge Effect Stresses in Bimaterial Elements

Journal of Electronic Packaging, 112(1), 16–23.

Geometric Non-linearity in a Bi-Material Strip

Proceedings of the International Congress of Applied Mechanics. Presented at the International Congress of Applied Mechanics, Beijing, People's Republic of China.

Multi-Rigid-Body Kinematic Analysis with Elastic Finite Elements

Proceedings of the Symposium on Dynamics and Control of Multi-Body/Robotic Systems with Space Applications, ASME Dynamic Systems and Controls, 15.

Thermal Stress Analysis of a Bimaterial Strip Subject to an Axial Temperature Gradient

Journal of Electronic Packaging, 111(4), 282–288.

Deformation and Stress in Thin BiMaterial Elements with an Axial Temperature Variation

(ASME Paper No. 88- WA/EEP-15).

An improved method for computing the integral

Engineering Fracture Mechanics, 26(5), 691–700.

Energy Release Rates and Related Balance Laws in Linear Elastic Defect Mechanics

Journal of Applied Mechanics, 54(2), 388–392.

Fracture of Non-homogeneous Materials

International Journal of Fracture, 34(3).

Fracture of Nonhomogeneous Materials

International Journal of Fracture.

Computation of stress intensity factors for plate bending via a path-independent integral

Engineering Fracture Mechanics, 25(4), 451–462.

Harmonic Wave Propagation in Nonhomogeneous Layered Composites

Journal of Applied Mechanics, 53(1), 108–115.