Hooman V Tafreshi

Adhesion Forces on A Droplet Sandwiched between Hydrophobic Fibrous Layers

13th World Filtration Congress. Presented at the 13th World Filtration Congress, San Diego, CA.

Detaching Water Droplets from a Fiber using a Magnetic Field

13th World Filtration Congress. Presented at the 13th World Filtration Congress, San Diego, CA.

Molecular dynamics simulation of steady-state droplet condensation on a fiber in direct contact membrane distillation settings

JOURNAL OF MOLECULAR LIQUIDS, 368.

Physics-based deep neural network model to guide electrospinning polyurethane fibers

Rahman, S. M., Tafreshi, H. V., & Pourdeyhimi, B. (2022, September 20). JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 9.

Studying Filtration through Micro- And Macro-Scale Modeling and Experiment

13th World Filtration Congress. Presented at the 13th World Filtration Congress, San Diego, CA.

Centrifugal Detachment of Compound Droplets from Fibers

LANGMUIR, 37(2), 928–938.

Controlling detachment residue via magnetic repulsion force

APPLIED PHYSICS LETTERS, 118(19).

Fluid Mechanics of Droplet Fiber Adhesion

FiltCon 2021, American Filtration and Separations Society. Presented at the FiltCon 2021, American Filtration and Separations Society.

Novel Method to Measure Droplet Contact Angle with a Fiber

13th World Filtration Congress. Presented at the 13th World Filtration Congress, San Diego, CA.

Numerical simulation of two-phase droplets on a curved surface using Surface Evolver

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 629.

Respiratory Effectiveness of Cloth Masks

The Journal of Science and Medicine, 2(4).

Studying droplet adhesion to fibers using the magnetic field: a review paper

[Review of ]. EXPERIMENTS IN FLUIDS, 62(8).

Activated carbon-doped polystyrene fibers for direct contact membrane desalination

Emergent Materials, 3(6), 807–814.

Measuring Force of Droplet Detachment from Hydrophobic Surfaces via Partial Cloaking with Ferrofluids

Langmuir, 36(22), 6116–6125.

Modeling electrospun fibrous structures with embedded spacer particles: Application to aerosol filtration

Separation and Purification Technology, 235, 116184.

Novel approach to model microstructure of dust-deposits comprised of polydisperse particles of arbitrary shapes

Separation and Purification Technology, 244, 116844.

On liquid bridge adhesion to fibrous surfaces under normal and shear forces

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 589, 124473.

Performance of electrospun polystyrene membranes in synthetic produced industrial water using direct-contact membrane distillation

Desalination, 493, 114663.

Understanding Airborne Dust and Droplet Filtration via Multiscale Modeling and Experiment

FiltXpo 2020. Presented at the FiltXpo 2020, Chicago, IL.

Characterizing Nonwoven Fibrous Materials via Realistic Microstructural Simulation

American Filtration and Separations Society. Presented at the American Filtration and Separations Society, Cherry Hill, NJ.

Characterizing nonwoven materials via realistic microstructural modeling

Separation and Purification Technology, 211, 602–609.

Competing forces on a liquid bridge between parallel and orthogonal dissimilar fibers

Soft Matter, 15(35), 6967–6977.

Easy-to-use correlations to estimate droplet mobility on hydrophobic fibrous coatings

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 582.

Effects of Electrospinning Parameters on Microstructure of Polystyrene Fibrous Mats

American Filtration and Separations Society. Presented at the American Filtration and Separations Society, Cherry Hill, New Jersey.

Empirical model to simulate morphology of electrospun polycaprolactone mats

Journal of Applied Polymer Science, 136(46), 48242.

Fluid and Particle Transport through Fibrous Media and Fibrous Coatings

American Filtration and Separations Society. Presented at the American Filtration and Separations Society, Cherry Hill, New Jersey.

On the Adhesion Force between a Droplet and a Single Fiber

American Filtration and Separations Society. Presented at the American Filtration and Separations Society, Cherry Hill, New Jersey.

Penetration of liquid droplets into hydrophobic fibrous materials under enhanced gravity

Journal of Applied Physics, 125(14), 145304.

Simple method for measuring intrinsic contact angle of a fiber with liquids

Experiments in Fluids, 60(5).

Understanding Droplet Mobility and Penetration in Nonwovens via Numerical Simulation and Complementary Experiment

American Filtration and Separations Society. Presented at the American Filtration and Separations Society, Cherry Hill, New Jersey.

Using Magnetic Field to Measure Detachment Force between a Nonmagnetic Droplet and Fibers

Langmuir, 6.

Virtual Modeling in Design and Testing

Tafreshi, H. V. (2019, July). Filtration+Separation.

A new approach to modeling liquid intrusion in hydrophobic fibrous membranes with heterogeneous wettabilities

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 558, 154–163.

Droplet Mobility on Hydrophobic Fibrous Coatings Comprising Orthogonal Fibers

Langmuir, 34(41), 12488–12499.

Droplet adhesion to hydrophobic fibrous surfaces

Applied Surface Science, 456, 626–636.

Dynamical insights into the mechanism of a droplet detachment from a fiber

Soft Matter, 14(44), 8924–8934.

Dynamics of Droplet Detachment from a Fiber

Experiment in Fluids, 59, 122.

Effects of electrospinning conditions on microstructural properties of polystyrene fibrous materials

Journal of Applied Physics, 124(23), 235307.

Energy efficiency of direct contact membrane distillation

Desalination, 433, 56–67.

Measurement of inflection angle and correlation of shape factor of barrel-shaped droplets on horizontal fibers

Separation and Purification Technology, 204, 127–132.

Modelling droplet sliding angle on hydrophobic wire screens

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 538, 310–319.

Molecular Dynamic Simulations of Fibrous Distillation Membranes

International Communications in Heat and Mass Transfer, 98, 304–309.

Predictive Correlations for Droplet–Fiber Detachment Force

Journal of Applied Physics, 124.

Role of particles spatial distribution in drag reduction performance of superhydrophobic granular coatings

International Journal of Multiphase Flow, 98, 128–138.

Droplet interactions with smooth and rough fibers

Davoudi, M., Amrei, M. M., Chase, G. G., & Tafreshi, H. V. (2017, April 10). Presented at the American Filtration and Separations Society, Louisville, Kentucky.

Effects of roughness on droplet apparent contact angles on a fiber

Separation and Purification Technology, 180, 107–113.

Modeling Cassie droplets on superhydrophobic coatings with orthogonal fibrous structures

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 512, 61–70.

Modelling Drag Reduction and Droplet Mobility over Superhydrophobic wire screen

Venkateshan, D. G., & Tafreshi, H. V. (2017, September 4). Presented at the Virginia Soft Matter Symposium, James Madison University.

Novel Approach to Measuring Droplet Detachment Force from Fibers

Amrei, M. M., & Tafreshi, H. V. (2017, September 4). Presented at the Virginia Soft Matter Symposium, James Madison University.

An analytical approach to predict pressure drop and collection efficiency of dust-load pleated filters

Separation and Purification Technology, 161, 80–87.

Electrospun Mats with Orthogonal Fibers for Aerosol Filtration and/or Water Repellency Applications: A Computational Study

Bucher, T. M., Ameri, M. M., & Tafreshi, H. V. (2016, September 13). Presented at the Nanofibers, Applications, and Related Technologies (NART), Raleigh, North Carolina.

Failure pressures and drag reduction benefits of superhydrophobic wire screens

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 511, 247–254.

Flow-enhanced kinetics of uranyl (UO2) transport into nano-porous silica gel

Materials & Design, 106, 330–335.

Liquid–Infused Surfaces with Trapped Air (LISTA) for Drag Force Reduction

Langmuir, 32(12), 2955–2962.

Modeling Detachment of A Droplet from A Fiber Crossover

Amrei, M. M., & Tafreshi, H. V. (2016, May 9). Presented at the American Filtration and Separation Society, Houston, Texas.

Modeling Filtration Performance of Nanofiber Media, Nanofibers

Saleh, A. M., Tafreshi, H. V., & Pourdeyhimi, B. (2016, September 13). Presented at the Applications, and Related Technologies (NART), Raleigh, North Carolina.

Modeling Performance of Pleated Filters under Dust-Loading Condition

Saleh, A., Tafreshi, H. V., & Pourdeyhimi, B. (2016, May 9). Presented at the American Filtration and Separation Society, Houston, Texas.

Modeling Water Droplet Equilibrium Shape on Fibers with Trilobal Cross-Sections

Ameri, M. M., & Tafreshi, H. V. (2016, September 13). Presented at the Nanofibers, Applications, and Related Technologies (NART), Raleigh, North Carolina.

Modeling effects of fiber rigidity on thickness and porosity of virtual electrospun mats

Materials & Design, 96, 27–35.

Novel Approach to Measuring the Droplet Detachment Force from Fibers

Langmuir, 32(50), 13333–13339.

On the Underwater Performance of Superhydrophobic Fibrous Coatings

American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Houston, Texas.

Structural Simulation of Nanofibrous Materials with Different Fiber Rigidities

Venkateshan, D. G., Yousefi, S., Tahir, M. A., Tafreshi, H. V., & Pourdeyhimi, B. (2016, September 13). Presented at the Nanofibers, Applications, and Related Technologies (NART), Raleigh, North Carolina.

Wetting states of superhydrophobic surfaces made of polygonal pores or posts

Journal of Applied Physics, 119(17), 175304.

Effects of hydrostatic pressure on wetted area of submerged superhydrophobic granular coatings. Part 1: mono-dispersed coatings

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 465, 87–98.

Effects of pressure on wetted area of submerged superhydrophobic granular coatings. Part II: poly-dispersed coatings

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 481, 547–560.

Instantaneous Slip Length in Superhydrophobic Microchannels

Hemeda, A. A., & Tafreshi, H. V. (2015, November 23). Presented at the Division of Fluid Dynamics, American Physical Society, Boston, Massachusetts.

Instantaneous slip length in superhydrophobic microchannels having grooves with curved or dissimilar walls

Physics of Fluids, 27(10), 102101.

Modeling Fluid Penetration in Fibrous Media with Heterogeneous Wettabilities

Bucher, T. M., & Tafreshi, H. V. (2015, April 28). Presented at the American Filtration and Separation Society, Charlotte, North Carolina.

On the filtration performance of dust-loaded trilobal fibers

Separation and Purification Technology, 149, 295–307.

Service life of circular pleated filters vs. that of their flat counterpart

Separation and Purification Technology, 156, 881–888.

Submerged Superhydrophobic Surfaces with Partially-Pinned Air-Water Interface

Tafreshi, H. V., & Hemeda, A. (2015, November 23). Presented at the Division of Fluid Dynamics, American Physical Society, Boston, Massachusetts.

Water Entry Pressure for Heterogeneous Superhydrophobic Fibrous Materials

Bucher, T. M., & Tafreshi, H. V. (2015, April 28). Presented at the American Filtration and Separation Society, Charlotte, North Carolina.

Wetting resistance of heterogeneous superhydrophobic coatings with orthogonally layered fibers

Surface and Coatings Technology, 277, 117–127.

A simple semi-numerical model for designing pleated air filters under dust loading

Separation and Purification Technology, 137, 94–108.

General Formulations for Predicting Longevity of Submerged Superhydrophobic Surfaces Composed of Pores or Posts

Langmuir, 30(34), 10317–10327.

Modeling air-water interface in disordered fibrous media with heterogeneous wettabilities

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 461(1), 323–335.

Modeling performance of multi-component fibrous insulations against conductive and radiative heat transfer

International Journal of Heat and Mass Transfer, 71, 341–348.

Modeling service life of pleated filters exposed to poly-dispersed aerosols

Powder Technology, 266, 79–89.

3-D microscale simulation of dust-loading in thin flat-sheet filters: A comparison with 1-D macroscale simulations

Chemical Engineering Science, 99, 284–291.

A simple simulation method for designing fibrous insulation materials

Materials & Design, 44, 99–106.

Convective Air Mass Transfer in Submerged Superhydrophobic Surfaces: Turbulent Flow

Bulletin of the American Physical Society, 58(18), 349.

Convective Mass Transfer From Submerged Superhydrophobic Surfaces

International Journal of Flow Control, 5(2), 79–88.

Convective Mass Transfer From Submerged Superhydrophobic Surfaces: Turbulent Flow

International Journal of Flow Control, 5(3-4), 143–152.

Dual-scale 3-D approach for modeling radiative heat transfer in fibrous insulations

International Journal of Heat and Mass Transfer, 64, 1109–1117.

Modeling Depth and Surface Dust-Loading in Pleated Air Filters

Fotovati, S., Saleh, A., Tafreshi, H. V., & Pourdeyhimi, B. (2013, May 6). Presented at the American Filtration and Separation Society, Bloomington, Minnesota.

Modeling performance of thin fibrous coatings with orthogonally layered nanofibers for improved aerosol filtration

Powder Technology, 249, 43–53.

Novel method to characterize superhydrophobic coatings

Journal of Colloid and Interface Science, 395(1), 315–321.

On applications and limitations of one-dimensional capillarity formulations for media with heterogeneous wettability

Applied Physics Letters, 102(24).

On the effects of fiber orientation in permeability of fibrous media to power-law fluids

International Journal of Heat and Mass Transfer, 60, 375–379.

Predicting longevity of submerged superhydrophobic surfaces with parallel grooves

Physics of Fluids, 25(6).

A macroscale model for simulating pressure drop and collection efficiency of pleated filters over time

Separation and Purification Technology, 98, 344–355.

Analytical Monte Carlo Ray Tracing simulation of radiative heat transfer through bimodal fibrous insulations with translucent fibers

International Journal of Heat and Mass Transfer, 55(23-24), 7234–7246.

Convective Air Mass Transfer in Submerged Superhydrophobic Surfaces

Bulletin of the American Physical Society, 57(17), 305.

Effect of fiber orientation on shape and stability of air–water interface on submerged superhydrophobic electrospun thin coatings

Journal of Applied Physics, 111(6), 064325.

Effects of Hydrostatic Pressure on the Drag Reduction of Submerged Aerogel-Particle Coatings

Bulletin of the American Physical Society, 57(17), 373.

Effects of Salinity on Drag Reduction and Longevity of Superhydrophobic Fiber Coatings

Journal of Applied Polymer Science, 123, 1112.

Effects of hydrostatic pressure on the drag reduction of submerged aerogel-particle coatings

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 399, 62–70.

Influence of Flow on Longevity of Superhydrophobic Coatings

Langmuir, 28(25), 9759–9766.

Microscale 2-D Modeling of Instantaneous Dust Loading of Fibrous Filters

Hosseini, S. A., & Tafreshi, H. V. (2012, June 4). Presented at the American Filtration and Separation Society, Boca Raton, Florida.

Modeling Dust-Loading in Pleated Depth Filters

Fotovati, S., Tafreshi, H. V., & Pourdeyhimi, B. (2012, June 4). Presented at the American Filtration and Separation Society, Boca Raton, Florida.

Modeling Fluid Absorption in Anisotropic Fibrous Porous Media

In R. Masoodi & K. M. Pillai (Eds.), Wicking in Porous Materials: Traditional and Modern Modeling Approaches (pp. 144–173).

Modeling Superhydrophobic Surfaces Comprised of Randomly Deposited Fibers or Particles

Bucher, T. M., Emami, B., & Tafreshi, H. V. (2012, May 14). Presented at the 4th International Conference on Porous Media & Annual Meeting of the International Society for Porous Media (InterPore), West Lafayette, Indiana.

Modeling Transport Phenomena in Anisotropic Fibrous Media

Tafreshi, H. V., & Bucher, T. M. (2012, May 14). Presented at the 4th International Conference on Porous Media & Annual Meeting of the International Society for Porous Media (InterPore), West Lafayette, Indiana.

Modeling particle-loaded single fiber efficiency and fiber drag using ANSYS-Fluent CFD code

Computers and Fluids, 66, 157–166.

Modeling resistance of nanofibrous superhydrophobic coatings to hydrostatic pressures: The role of microstructure

Physics of Fluids, 24(2), 022109.

Novel Method to Characterize Superhydrophobic Coatings

Bulletin of the American Physical Society, 57(17), 100.

Optimizing fiber cross-sectional shape for improving stability of air–water interface over superhydrophobic fibrous coatings

Applied Physics Letters, 100(19), 193104.

Predicting shape and stability of air-water interface on superhydrophobic surfaces comprised of pores with arbitrary shapes and depths

Applied Physics Letters, 100(1).

Superhydrophobic surfaces: From the lotus leaf to the submarine

Comptes Rendus Mécanique, 340(1-2), 18–34.

Sustainability of Superhydrophobicity Under Pressure

Bulletin of the American Physical Society, 57(17), 373.

Sustainability of superhydrophobicity under pressure

Physics of Fluids, 24(11).

A Monte Carlo simulation of radiative heat through fibrous media: Effects of boundary conditions and microstructural parameters

International Journal of Thermal Sciences, 50(6), 935–941.

A methodology for determining optimal thermal damage in magnetic nanoparticle hyperthermia cancer treatment

International Journal for Numerical Methods in Biomedical Engineering, 28(2), 205–213.

An Overview on Micro- and Macro-Scale Modeling of Aerosol Filters

Tafreshi, H. V., & Pourdeyhimi, B. (2011, September 13). Presented at the NETInc, Innovative Nonwovens Conference, Atlanta, Georgia.

An Overview on Modeling Fluid Absorption in Fibrous Media

Bucher, T. M., & Tafreshi, H. V. (2011, September 13). Presented at the NETInc, Innovative Nonwovens Conference, Atlanta, Georgia.

Analytical expressions for predicting performance of aerosol filtration media made up of trilobal fibers

Journal of Hazardous Materials, 186(2-3), 1503–1512.

Fabrication of Superhydrophobic Fiber Coatings by DC-Biased AC-Electrospinning

Bulletin of the American Physical Society, 56(18), 50.

Fabrication of superhydrophobic fiber coatings by DC-biased AC-electrospinning

Journal of Applied Polymer Science, 123(2), 1112–1119.

In Situ, Noninvasive Characterization of Superhydrophobic Coatings

Bulletin of the American Physical Society, 56(18), 314.

In situ, noninvasive characterization of superhydrophobic coatings

Review of Scientific Instruments, 82(4), 045109.

Modeling Superhydrophobic Surfaces Comprised of Random Roughness

Bulletin of the American Physical Society, 56(18), 314.

Modeling drag reduction and meniscus stability of superhydrophobic surfaces comprised of random roughness

Physics of Fluids, 23(1).

Modeling instantaneous pressure drop of pleated thin filter media during dust loading

Chemical Engineering Science, 66(18), 4036–4046.

Modeling motion-induced fluid release from partially saturated fibrous media onto surfaces with different hydrophilicity

International Journal of Heat and Fluid Flow, 32(5), 1076–1081.

On the Drag Force and Collection Efficiency of Circular and Non-Circular, Clean and Loaded Submicron Fibers

Hosseini, S. A., & Tafreshi, H. V. (2011, May 10). Presented at the American Filtration and Separation Society, Louisville, Kentucky.

On the Resistance of Nanofibrous Superhydrophobic Coatings to Hydrostatic Pressures

Bulletin of the American Physical Society, 56(18), 175.

On the importance of fibers' cross-sectional shape for air filters operating in the slip flow regime

Powder Technology, 212(3), 425–431.

Predicting Stability of Air-Water Interface on Superhydrophobic Surfaces

Bulletin of the American Physical Society, 56(18), 55.

Predicting shape and stability of air–water interface on superhydrophobic surfaces with randomly distributed, dissimilar posts

Applied Physics Letters, 98(20), 203106.

Salinity Effects on Superhydrophobic Coatings

Bulletin of the American Physical Society, 56(18), 314.

Simulation of meniscus stability in superhydrophobic granular surfaces under hydrostatic pressures

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 385(1-3), 95–103.

Transient modeling of dust-loaded pleated air filters

American Filtration and Separations Society Annual Conference 2011 - Shape up to Green, 464–470. http://www.scopus.com/inward/record.url?eid=2-s2.0-84883797244&partnerID=MN8TOARS

3-D simulation of particle filtration in electrospun nanofibrous filters

Powder Technology, 201(2), 153–160.

A semi-analytical model for simulating fluid transport in multi-layered fibrous sheets made up of solid and porous fibers

Computational Materials Science, 50(2), 378–390.

Analytical expressions for predicting capture efficiency of bimodal fibrous filters

Journal of Aerosol Science, 41(3), 295–305.

Capture efficiency and pressure drop of bimodal filter media

American Filtration and Separations Society Annual National Conference and Exposition 2010, 2, 710–718. http://www.scopus.com/inward/record.url?eid=2-s2.0-84883771850&partnerID=MN8TOARS

Effect of fiber orientation distribution on filter performance

American Filtration and Separations Society Annual National Conference and Exposition 2010, 2. http://www.scopus.com/inward/record.url?eid=2-s2.0-84883817446&partnerID=MN8TOARS

Influence of fiber orientation distribution on performance of aerosol filtration media

Chemical Engineering Science, 65(18), 5285–5293.

Modeling Filtration Efficiency of Electrospun Nanofibrous Filters

Hosseini, S. A., & Tafreshi, H. V. (2010, August 30). Presented at the Nanofibers for the 3rd Millennium, Raleigh, North Carolina.

Modeling Particle Filtration in 3-D Electrospun Nanofibrous Filters

American Filtration and Separation Society. Presented at the American Filtration and Separation Society, San Antonio, Texas.

Modeling Particle Loading in Fibrous Filter Media

American Filtration and Separation Society. Presented at the American Filtration and Separation Society, San Antonio, Texas.

Modeling Radiative Heat Transfer in Fibrous Insulation Media

Tahir, M. A., Tafreshi, H. V., & Pourdeyhimi, B. (2010, November 10). Presented at the NETInc, Innovative Nonwovens Conference, Raleigh, North Carolina.

Modeling fluid spread in thin fibrous sheets: Effects of fiber orientation

International Journal of Heat and Mass Transfer, 53(9-10), 1750–1758.

Modeling particle filtration in disordered 2-D domains: A comparison with cell models

Separation and Purification Technology, 74(2), 160–169.

Modeling permeability of 3-D nanofiber media in slip flow regime

Chemical Engineering Science, 65(6), 2249–2254.

Modeling the role of microstructural parameters in radiative heat transfer through disordered fibrous media

International Journal of Heat and Mass Transfer, 53(21-22), 4629–4637.

A realistic modeling of fluid infiltration in thin fibrous sheets

Journal of Applied Physics, 105(11).

A study on compression-induced morphological changes of nonwoven fibrous materials

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 337(1-3), 173–179.

A two-scale modeling of motion-induced fluid release from thin fibrous porous media

Chemical Engineering Science, 64(9), 2067–2075.

An Analytical Expression for Predicting the Pressure Drop of Bimodal Filter Media

American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Minneapolis, Minnesota.

An Investigation of the Radiative Heat Transfer through Nonwoven Fibrous Materials

Journal of Engineered Fibers and Fabrics, 4(1), 155892500900400.

Analytical expressions for predicting permeability of bimodal fibrous porous media

Chemical Engineering Science, 64(6), 1154–1159.

General capillary pressure and relative permeability expressions for through-plane fluid transport in thin fibrous sheets

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 346(1-3), 114–122.

Influence of fiber orientation on the transverse permeability of fibrous media

Physics of Fluids, 21(8).

Modeling Fluid Infiltration in Fibrous Materials

Techtextil North America. Presented at the Techtextil North America, Las Vegas, NV.

Modeling Performance of Multi-Layer Composite Air Filters

Techtextil North America. Presented at the Techtextil North America, Las Vegas, NV.

Modeling Pressure Drop and Collection Efficiency of Micro- and Nanofiber Filters

Nanofibers For The 3rd Millennium - Nano For Life. Presented at the Nanofibers For The 3rd Millennium - Nano For Life, Liberec, Czech Republic.

Motion of Liquid Drops Through Complex 3D Clothing

Presented at the ASME 2009 Fluids Engineering Division Summer Meeting.

Three-dimensional Simulation of Particle Filtration in Electrospun Nanofibrous Filters

American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Minneapolis, Minnesota.

Two-dimensional Modeling of Nanoparticle Collection Efficiency in Bimodal Filters

American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Minneapolis, Minnesota.

A CFD-based Two-Scale modeling approach to predict permeability of fibrous structures

American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Valley Forge, Pennsylvania.