Works (128)
Updated: April 4th, 2024 14:57
2023 article
All Electrohydrodynamic Printed Flexible Organic Thin Film Transistors
Ren, P., Song, R., Zhu, Y., O'Connor, B., & Dong, J. (2023, June 21). ADVANCED MATERIALS TECHNOLOGIES, Vol. 6.
author keywords: electrohydrodynamic printing; flexible electronics; flexible transistors; organic thin film transistors; orthogonal inks
onlinelibrary.wiley.com (publisher PDF)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: July 3, 2023
2023 article
Direct printing of conductive polymer PEDOT:PSS for foldable transient electronics
Ren, P., & Dong, J. (2023, August). MANUFACTURING LETTERS, Vol. 35, pp. 215–220.
author keywords: EHD printing; Foldable electronics; PEDOT: PSS; Transient electronics
Sources: ORCID, Web Of Science, NC State University Libraries
Added: October 24, 2023
2023 article
Electrohydrodynamic Printed Pedot:Pss/Graphene/Pva Circuits for Sustainable and Foldable Electronics
Ren, P., & Dong, J. (2023, August 24). ADVANCED MATERIALS TECHNOLOGIES, Vol. 8.
author keywords: eco-friendly electronics; electrohydrodynamic printing; foldable electronics; temperature sensors; transient electronics
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: August 31, 2023
2023 article
Stretchable Organic Transistor Based Pressure Sensor Employing a Porous Elastomer Gate Dielectric
Song, R., Ren, P., Liu, Y., Zhu, Y., Dong, J., & Brendan T. O'Connor. (2023, April 28). ADVANCED MATERIALS TECHNOLOGIES, Vol. 4.
author keywords: elastomer dielectric; organic thin film transistors; porous structures; pressure sensors
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
7. Affordable and Clean Energy
(OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: May 15, 2023
2022 journal article
Curvilinear soft electronics by micromolding of metal nanowires in capillaries
SCIENCE ADVANCES, 8(46).
Contributors: Y. Liu n, M. Zheng n, B. O’Connor n, n & Y. Zhu n
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: November 19, 2022
2022 journal article
Direct electrohydrodynamic printing of aqueous silver nanowires ink on hydrophobic substrates for flexible and stretchable electronics
Manufacturing Letters, 33, 161–166.
Source: ORCID
Added: September 21, 2022
2022 journal article
Fabrication, modeling, and characterization of soft twisting electrothermal actuators with directly printed oblique heater
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 32(3).
author keywords: soft actuator; electrohydrodynamic (EHD) printing; soft twisting actuator; electrothermal actuator
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
11. Sustainable Cities and Communities
(Web of Science)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: January 31, 2022
2022 journal article
Freeform printing and modeling of soft twisting electrothermal actuators
Manufacturing Letters, 33, 41–47.
Source: ORCID
Added: September 21, 2022
2022 journal article
Investigation of Gaussian mixture clustering model for online diagnosis of tip-wear in nanomachining
JOURNAL OF MANUFACTURING PROCESSES, 77, 114–124.
Contributors: F. Cheng *, S. Zhai* & n
author keywords: Unsupervised machine learning; Gaussian Mixture Model; Statistical pattern recognition; Nanomachining; Tip Wear online diagnosis
Sources: Web Of Science, ORCID, NC State University Libraries
Added: May 23, 2022
2022 article
Student perceptions of remote learning transitions in engineering disciplines during the COVID-19 pandemic: a cross-national study
Behera, A. K., Sousa, R. A., Oleksik, V., Dong, J., & Fritzen, D. (2022, June 4). EUROPEAN JOURNAL OF ENGINEERING EDUCATION, Vol. 48.
Contributors: A. Behera *, R. Sousa *, V. Oleksik *, n & D. Fritzen
author keywords: E-learning; cross-sectional study; multivariate analysis; engineering; student preferences
UN Sustainable Development Goal Categories
4. Quality Education
(Web of Science)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: June 20, 2022
2021 journal article
AFM-Based nanofabrication and quality inspection of three-dimensional nanotemplates for soft lithography
JOURNAL OF MANUFACTURING PROCESSES, 66, 565–573.
author keywords: Soft lithography; Solvent-assisted micromolding; Atomic force microscope (AFM); Ultrasonic vibration assisted nanomachining; Nanotemplate; Nanomolds; Quality
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: June 10, 2021
2021 journal article
Achieving High-Resolution Electrohydrodynamic Printing of Nanowires on Elastomeric Substrates through Surface Modification
ACS APPLIED ELECTRONIC MATERIALS, 3(1), 192–202.
author keywords: EHD printing; stretchable electronics; silver nanowires; PDMS surface modification; UVO treatment; polydopamine coating
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: March 15, 2021
2021 journal article
Data-driven online detection of tip wear in tip-based nanomachining using incremental adaptive support vector machine
JOURNAL OF MANUFACTURING PROCESSES, 69, 412–421.
Contributors: F. Cheng * & n
author keywords: AFM tip wear; Online detection; Statistical pattern recognition; Incremental adaptive learning; SVM classifier
TL;DR:
From experimental data, it was shown that the average accuracy of IASVM's recognition of the tip wear conditions was 95% and the average calculation time was 0.166 s, which makes it a promising approach for online detection of tip damage in nanomachining process.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: September 27, 2021
2021 article
Direct Fabrication of VIA Interconnects by Electrohydrodynamic Printing for Multi-Layer 3D Flexible and Stretchable Electronics
Ren, P., & Dong, J. (2021, June 27). ADVANCED MATERIALS TECHNOLOGIES, Vol. 6.
Contributors: P. Ren n & n
author keywords: direct metal printing; electrohydrodynamic printing; flexible and stretchable electronics; printed electronics; VIA interconnects
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: July 6, 2021
2021 journal article
Programmable soft electrothermal actuators based on free-form printing of the embedded heater
SOFT MATTER, 17(9), 2577–2586.
Contributors: Y. Cao & n
TL;DR:
This article reports a new approach to fabricate soft electrothermal actuators, in which the resistive heater of the electroThermal actuator is directly printed using electrohydrodynamic (EHD) printing.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
11. Sustainable Cities and Communities
(Web of Science)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: April 12, 2021
2021 journal article
Self-Sensing and Control of Soft Electrothermal Actuator
IEEE-ASME TRANSACTIONS ON MECHATRONICS, 26(2), 854–863.
Contributors: Y. Cao & n
author keywords: Actuators; Heating systems; Electrothermal actuators; Temperature measurement; Sensors; Cooling; Bending; Soft actuator; electrothermal actuator; resistive self-sensing; closed-loop control
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
11. Sustainable Cities and Communities
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: May 24, 2021
2020 conference paper
Fabrication and self-sensing control of soft electrothermal actuator
Procedia Manufacturing, 48, 43–48.
author keywords: Soft electrothermal actuator; Electrohydrodynamic (EHD) printing; Self-sensing; Closed-loop control
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Source: ORCID
Added: July 11, 2022
2020 journal article
Facile Approach to Fabricating Stretchable Organic Transistors with Laser-Patterned Ag Nanowire Electrodes
ACS APPLIED MATERIALS & INTERFACES, 12(45), 50675–50683.
author keywords: stretchable electronics; Ag nanowires; laser patterning; organic electronics; organic thin-film transistors
TL;DR:
The ability to pattern highly conductive Ag NW networks using laser ablation to pattern electrodes as well as interconnects provides a simple strategy to produce complex stretchable OTFT-based circuits.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: February 1, 2021
2020 journal article
Study of tip wear for AFM-based vibration-assisted nanomachining process
Journal of Manufacturing Processes, 50, 47–56.
Contributors: X. Kong n, J. Deng n, n & P. Cohen n
author keywords: Tip-based nanomachining; Atomic force microscope (AFM); Tip wear monitoring; Tip wear modeling
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: ORCID
Added: July 11, 2022
2019 journal article
Editorial: Welcome to engineering research express
Engineering Research Express, 1(1).
Source: ORCID
Added: July 11, 2022
2019 journal article
High-performance low-voltage soft electrothermal actuator with directly printed micro-heater
SENSORS AND ACTUATORS A-PHYSICAL, 297.
author keywords: Soft actuator; Electrohydrodynamic (EHD) printing; Soft robotics; Electrothermal actuator
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
11. Sustainable Cities and Communities
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: November 11, 2019
2019 journal article
Monitoring tip-based nanomachining process by time series analysis using support vector machine
JOURNAL OF MANUFACTURING PROCESSES, 38, 158–166.
Contributors: F. Cheng * & n
author keywords: AFM tip-based nanomachining; Process monitoring; Tip wear detection; Time series data; Support vector machine
TL;DR:
Time-series data analysis and pattern recognition using a multi-class support vector machine (SVM) confirmed that the SVM-based pattern recognition technology via time series data could successfully monitor the tip wear and process performance for tip-based nanomachining process.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: April 2, 2019
2019 journal article
Nano-machining AFM Tip Wear Monitoring Based on Time Series Data and Support Vector Machine,基于时间序列数据和支持向量机的纳米加工AFM刀尖损伤监测
Jiliang Xuebao/Acta Metrologica Sinica, 40(4), 647–654.
Source: ORCID
Added: July 11, 2022
2019 journal article
Nanomaterial‐Enabled Flexible and Stretchable Sensing Systems: Processing, Integration, and Applications
Advanced Materials, 32(15), 1902343.
author keywords: electronic skins; flexible and stretchable systems; flexible hybrid electronics; health and fitness tracking; human-machine interfaces
MeSH headings : Biosensing Techniques / instrumentation; Biosensing Techniques / methods; Blood Pressure; Electrocardiography; Equipment Design; Humans; Information Storage and Retrieval; Nanostructures / chemistry; Skin Physiological Phenomena; Volatile Organic Compounds / analysis; Wearable Electronic Devices
TL;DR:
An overview of the design and integration strategies and manufacturing techniques for nanomaterial‐enabled flexible and stretchable sensing systems and representative applications in personal health, fitness tracking, electronic skins, artificial nervous systems, and human–machine interactions are provided.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries, Crossref
Added: September 23, 2019
2019 conference paper
Three-dimensional nanomolds fabrication for nanoimprint lithography
Procedia Manufacturing, 34, 228–232.
author keywords: Nanomolds; Atomic Force Microscope (AFM); Ultrasonic Vibration Assisted Nanomachining; Nanoimprint Lithography
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: ORCID
Added: July 11, 2022
2018 journal article
Characterization and Modeling of Catalyst-free Carbon-Assisted Synthesis of ZnO Nanowires
JOURNAL OF MANUFACTURING PROCESSES, 32, 438–444.
author keywords: ZnO nanowire synthesis; chemical vapor deposition (CVD); process modeling
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2018 journal article
Development and Characterization of Ultrasonic Vibration Assisted Nanomachining Process for Three-Dimensional Nanofabrication
IEEE TRANSACTIONS ON NANOTECHNOLOGY, 17(3), 559–566.
author keywords: 3-D Nanomachining; tip-based nanofabrication; atomic force microscope (AFM); ultrasonic vibration assisted nanomachining
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2018 journal article
Electrohydrodynamic (EHD) Printing of Molten Metal Ink for Flexible and Stretchable Conductor with Self‐Healing Capability
Advanced Materials Technologies, 3(3).
author keywords: direct metal printing; electrohydrodynamic (EHD) printing; flexible and stretchable electronics; printed electronics; self-healing circuits
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: ORCID
Added: July 11, 2022
2018 journal article
Electrohydrodynamic Printing for Advanced Micro/Nanomanufacturing: Current Progresses, Opportunities, and Challenges
JOURNAL OF MICRO AND NANO-MANUFACTURING, 6(4).
Contributors: Y. Han n & n
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: December 31, 2018
2018 journal article
Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics
NANOSCALE, 10(15), 6806–6811.
TL;DR:
Electrohydrodynamic (EHD) printing has been developed as a promising technique to print different materials on a variety of substrates with high resolution and here, AgNW ink was developed for EHD printing.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
7. Affordable and Clean Energy
(OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2018 article
Fabrication of self-recoverable flexible and stretchable electronic devices
Han, Y., & Dong, J. (2018, July). JOURNAL OF MANUFACTURING SYSTEMS, Vol. 48, pp. 24–29.
Contributors: Y. Han n & n
author keywords: Electrohydrodynamic (EHD) printing; Metal printing; Printing electronics; Flexible and stretchable electronics; Self-recoverable
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: October 29, 2018
2018 journal article
Modeling of Catalyst-free Growth Process of ZnO Nanowires
Procedia Manufacturing, 26, 349–358.
author keywords: ZnO nanowire synthesis; chemical vapor deposition (CVD); process modeling
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science)
Sources: ORCID, Crossref, NC State University Libraries
Added: January 19, 2020
2018 journal article
Rapid Fabrication and Characterization of SERS Substrates
Procedia Manufacturing, 26, 580–586.
author keywords: AFM-based nanofabrication; SERS substrates; ultrasonic vibration assisted nanomachining
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: ORCID, Crossref, NC State University Libraries
Added: February 24, 2020
2017 journal article
AC-pulse modulated electrohydrodynamic jet printing and electroless copper deposition for conductive microscale patterning on flexible insulating substrates
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 43, 179–187.
author keywords: Electrohydrodynamic jet printing; Electroless copper deposition; AC-pulse modulation; Direct printing; Micro-manufacturing
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2017 journal article
Design, modeling and testing of integrated ring extractor for high resolution electrohydrodynamic (EHD) 3D printing
Journal of Micromechanics and Microengineering, 27(3).
Contributors: Y. Han* & *
author keywords: electrohydrodynamic (EHD) printing; ring extractor; electrostatic field; 3D printing
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: ORCID, NC State University Libraries, NC State University Libraries
Added: August 6, 2018
2017 journal article
Direct Printing and Electrical Characterization of Conductive Micro-Silver Tracks by Alternating Current-Pulse Modulated Electrohydrodynamic Jet Printing
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 139(2).
author keywords: electrohydrodynamic jet printing; drop-on-demand direct fabrication; inkjet printing; microtracks; silver nano-ink
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2017 journal article
Direct Printing of Capacitive Touch Sensors on Flexible Substrates by Additive E-Jet Printing With Silver Nanoinks
Journal of Manufacturing Science and Engineering-Transactions of the Asme, 139(3).
author keywords: rapid prototyping; capacitive touch sensor; flexible substrates; inkjet printing
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: ORCID
Added: July 11, 2022
2017 journal article
Fabrication and electrical characterization of multi-layer capacitive touch sensors on flexible substrates by additive e-jet printing
JOURNAL OF MANUFACTURING PROCESSES, 28, 479–485.
author keywords: Electrohydrodynamic; Inkjet printing; Capacitive touch sensor; Silver nano
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2017 conference paper
High-Resolution Electrohydrodynamic (EHD) Direct Printing of Molten Metal
Procedia Manufacturing, 10, 845–850.
author keywords: Electrohydrodynamic (EHD); electrostatic field; metal printing; 3D printing
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: ORCID
Added: July 11, 2022
2017 journal article
High-resolution direct printing of molten-metal using electrohydrodynamic jet plotting
Manufacturing Letters, 12, 6–9.
Source: ORCID
Added: July 11, 2022
2017 journal article
Modeling of the dynamic machining force of vibration-assisted nanomachining process
Journal of Manufacturing Processes, 28, 101–108.
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Sources: NC State University Libraries, ORCID, NC State University Libraries
Added: August 6, 2018
2016 journal article
AFM-based 3D nanofabrication using ultrasonic vibration assisted nanomachining
JOURNAL OF MANUFACTURING PROCESSES, 24, 195–202.
author keywords: 3D nanomachining; Atomic force microscope (AFM); Tip-based nanofabrication; Ultrasonic vibration assisted nanomachining
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2016 journal article
DIRECT PRINTING OF CAPACITIVE TOUCH SENSORS ON FLEXIBLE SUBSTRATES BY ADDITIVE E-JET PRINTING WITH SILVER NANOINKS
Proceedings of the Asme 11th International Manufacturing Science and Engineering Conference, 2016, Vol 1. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000388159100032&KeyUID=WOS:000388159100032
Source: ORCID
Added: July 11, 2022
2016 article
Design of Integrated Ring Extractor for High Resolution Electrohydrodynamic (EHD) 3D Printing
44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44, Vol. 5, pp. 1031–1042.
Contributors: Y. Han n, n , A. Shih & L. Wang
author keywords: Ring extractor; Electrohydrodynamic (EHD) printing; Electrostatic field; 3D printing
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2016 conference paper
Direct printing of capacitive touch sensors on flexible substrates by additive e-jet printing with silver nanoinks
Proceedings of the ASME 11th International Manufacturing Science and Engineering Conference, 2016, vol 1, 139(3).
Sources: NC State University Libraries, NC State University Libraries
Added: August 6, 2018
2016 conference paper
Direct printing of capacitive touch sensors on flexible substrates by additive e-jet printing with silver nanoinks
ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016, 1.
Source: ORCID
Added: July 11, 2022
2016 journal article
Feedrate optimization for smooth minimum-time trajectory generation with higher order constraints
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 82(5-8), 1029–1040.
author keywords: Feedrate scheduling; Jerk constraints; Trajectory generation; Optimal control
TL;DR:
This paper proposes a heuristic trajectory planning algorithm that can provide a near-optimal minimum time trajectory for problems with higher order dynamic states and supports the incorporation of higher orderynamic states in constraints for optimization without sacrificing the computational efficiency.
(via Semantic Scholar)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2016 article
High Rate 3D Nanofabrication by AFM-Based Ultrasonic Vibration Assisted Nanomachining
44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44, Vol. 5, pp. 1283–1294.
author keywords: 3D nanomachining; Tip-based nanofabrication; Atomic Force Microscope (AFM); Ultrasonic vibration Assisted Nanomachining
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2016 article
Predictive modeling of feature dimension for tip-based nano machining process
Kong, X., Cohen, P. H., & Dong, J. (2016, October). JOURNAL OF MANUFACTURING PROCESSES, Vol. 24, pp. 338–345.
author keywords: Nanofabrication; Tip-based nano machining; Modeling of feature dimension
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2015 article
A Smooth Trajectory Generation Algorithm for Addressing Higher-Order Dynamic Constraints in Nanopositioning Systems
43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43, Vol. 1, pp. 216–225.
author keywords: Feedrate Scheduling; Jerk Constraints; Trajectory Generation; Optimal Control
TL;DR:
This paper proposes a heuristic trajectory planning algorithm that can provide a near optimal trajectory for problems with higher order dynamic states and supports the incorporation of high orderynamic states in constraints for optimization without sacrificing the computational efficiency.
(via Semantic Scholar)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2015 article
AFM-based 3D Nanofabrication using Ultrasonic Vibration Assisted Nanomachining
43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43, Vol. 1, pp. 584–592.
author keywords: 3D nanomachining; Atomic force microscope (AFM); Tip-based nanofabrication; Ultrasonic vibration
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2015 journal article
Development of a high-resolution micro-torsion tester for measuring the shear modulus of metallic glass fibers
Measurement Science and Technology, 26(2), 025902.
author keywords: micro-scale; torsion; metallic glass fiber; shear modulus
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Sources: Crossref, NC State University Libraries
Added: September 4, 2020
2015 journal article
Drop-on-demand E-jet printing of continuous interconnects with AC-pulse modulation on highly insulating substrates
JOURNAL OF MANUFACTURING SYSTEMS, 37, 505–510.
author keywords: Electrohydrodynamic (EHD) jet printing; Electrical interconnects; Drop-on-demand printing; AC-pulse modulation
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2015 journal article
Droplet formation and settlement of phase-change ink in high resolution electrohydrodynamic (EHD) 3D printing
JOURNAL OF MANUFACTURING PROCESSES, 20, 485–491.
author keywords: Electrohydrodynamic printing; FEA modeling; 3D printing; Phase-change ink
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2015 article
ELECTROHYDRODYNAMIC JET PRINTING OF SILVER SEEDS: MICRO SCALE PATTERNING BY ELECTROLESS COPPER DEPOSITION
PROCEEDINGS OF THE ASME 10TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2015, VOL 1.
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
2015 journal article
ELECTROHYDRODYNAMIC JET PRINTING OF SILVER SEEDS: MICRO SCALE PATTERNING BY ELECTROLESS COPPER DEPOSITION
Proceedings of the Asme 10th International Manufacturing Science and Engineering Conference, 2015, Vol 1. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000365146800073&KeyUID=WOS:000365146800073
Source: ORCID
Added: July 11, 2022
2015 conference paper
Electrohydrodynamic jet printing of silver seeds: Micro scale patterning by electroless copper deposition
ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015, 1.
Source: ORCID
Added: July 11, 2022
2015 article
Feedrate optimization and trajectory control for micro/nanopositioning systems with confined contouring accuracy
Bharathi, A., & Dong, J. (2015, July). PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 229, pp. 1193–1205.
author keywords: micro/nanomanufacturing; nanopositioning system; feedrate optimization; trajectory planning
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2015 journal article
MACHINING FORCE MODELING OF VIBRATION-ASSISTED NANO-MACHINING PROCESS
Proceedings of the Asme 10th International Manufacturing Science and Engineering Conference, 2015, Vol 2, 2.
Source: ORCID
Added: July 11, 2022
2015 conference paper
Machining force modeling of vibration-assisted nano-machining process
Proceedings of the ASME 10th International Manufacturing Science and Engineering Conference, 2015, vol 2.
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Sources: Crossref, NC State University Libraries
Added: August 6, 2018
2015 journal article
Roles of Hydroxyapatite Allocation and Microgroove Dimension in Promoting Preosteoblastic Cell Functions on Photocured Polymer Nanocomposites through Nuclear Distribution and Alignment
LANGMUIR, 31(9), 2851–2860.
MeSH headings : Animals; Caprolactam / chemistry; Caprolactam / pharmacology; Cell Adhesion / drug effects; Cell Line; Cell Nucleus / drug effects; Cell Nucleus / metabolism; Cell Proliferation / drug effects; Cell Shape / drug effects; Durapatite / chemistry; Gene Expression Regulation / drug effects; Light; Mice; Minerals / metabolism; Nanocomposites / chemistry; Osteoblasts / cytology; Osteoblasts / drug effects; Osteoblasts / metabolism; Tissue Engineering
TL;DR:
This study clarifies how hydroxyapatite (HA) allocation and microgroove dimension affect mouse preosteoblastic MC3T3-E1 cell functions on microgrooved substrates of polymer nanocomposite substrates and finds that Osteocalcin mRNA expression was significantly higher on the PCLTA/HA substrates than on thePCLTA ones and also on the microgrooves of PCL TA/HA than onthe flat ones.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2015 chapter
Ultrasonic Vibration-Assisted Nanomachining
In Encyclopedia of Nanotechnology (pp. 1–9).
Sources: Crossref, NC State University Libraries
Added: January 4, 2020
2014 conference paper
AC-pulse modulated electrohydrodynamic (EHD) direct printing of conductive micro silver tracks for micro-manufacturing
FAIM 2014 - Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing: Capturing Competitive Advantage via Advanced Manufacturing and Enterprise Transformation, 763–770. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960928060&partnerID=MN8TOARS
Source: ORCID
Added: July 11, 2022
2014 article
DIRECT FABRICATION OF HIGHLY CONDUCTIVE MICRO SILVER TRACKS USING ELECTROHYDRODYNAMIC JET PRINTING FOR SUB-20 mu M MICRO-MANUFACTURING
PROCEEDINGS OF THE ASME 9TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2014, VOL 2, Vol. 2.
author keywords: Electrohydrodynamic jet printing; Micro-manufacturing; Conductive silver tracks; Direct printing; Alternative current
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2014 journal article
Development and Modeling of Melt Electrohydrodynamic-Jet Printing of Phase-Change Inks for High-Resolution Additive Manufacturing
Journal of Manufacturing Science and Engineering-Transactions of the Asme, 136(6).
Contributors: C. Wei n & n
author keywords: electrohydrodynamic-jet printing; FEA modeling; phase-change ink; microscale additive manufacturing; 3D printing
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: ORCID, NC State University Libraries, NC State University Libraries
Added: August 6, 2018
2014 conference paper
Drop-on-demand E-Jet printing of continuous features with AC-pulse modulation on highly insulating substrates
Transactions of the North American Manufacturing Research Institution of SME, 42(January), 345–352. http://www.scopus.com/inward/record.url?eid=2-s2.0-84938054378&partnerID=MN8TOARS
Source: ORCID
Added: July 11, 2022
2014 journal article
High-resolution ac-pulse modulated electrohydrodynamic jet printing on highly insulating substrates
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 24(4).
author keywords: AC-pulse modulation; drop-on-demand; electrohydrodynamic jet printing
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2014 journal article
Hybrid hierarchical fabrication of three-dimensional scaffolds
JOURNAL OF MANUFACTURING PROCESSES, 16(2), 257–263.
Contributors: C. Wei n & n
author keywords: Tissue engineering; Hierarchical scaffolds; Free-form fabrication; Electrohydrodynamic melt jet plotting
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2014 journal article
Robust control of a MEMS probing device
Ieee-Asme Transactions on Mechatronics, 19(1), 100–108.
Contributors: X. Zhang*, B. Koo*, S. Salapaka *, n & P. Ferreira *
author keywords: Electrostatic comb drive; H-infinity control; microelectromechanical systems (MEMSs); nanopositioning; system identification
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Sources: ORCID, NC State University Libraries, NC State University Libraries
Added: August 6, 2018
2014 journal article
Super-resolution electrohydrodynamic (EHD) 3D printing of micro-structures using phase-change inks
Manufacturing Letters, 2(4), 96–99.
Contributors: Y. Han n, C. Wei n & n
Source: ORCID
Added: July 11, 2022
2014 conference paper
Time-optimal feed-rate scheduling for nanopositioning systems with confined contouring error
Transactions of the North American Manufacturing Research Institution of SME, 42(January), 372–380. http://www.scopus.com/inward/record.url?eid=2-s2.0-84938059294&partnerID=MN8TOARS
Source: ORCID
Added: July 11, 2022
2013 journal article
Direct fabrication of high-resolution three-dimensional polymeric scaffolds using electrohydrodynamic hot jet plotting
Journal of Micromechanics and Microengineering, 23(2).
Contributors: C. Wei n & n
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: ORCID, NC State University Libraries, NC State University Libraries
Added: August 6, 2018
2013 conference paper
Hybrid hierarchical fabrication of three-dimensional scaffolds
Transactions of the North American Manufacturing Research Institution of SME, 41, 541–547. http://www.scopus.com/inward/record.url?eid=2-s2.0-84892703159&partnerID=MN8TOARS
Source: ORCID
Added: July 11, 2022
2013 conference paper
Machining depth regulation and friction reduction in AFM-based ultrasonic vibration assisted nanomachining
Transactions of the North American Manufacturing Research Institution of SME, 41, 482–488. http://www.scopus.com/inward/record.url?eid=2-s2.0-84892764978&partnerID=MN8TOARS
Source: ORCID
Added: July 11, 2022
2013 journal article
Material-Insensitive Feature Depth Control and Machining Force Reduction by Ultrasonic Vibration in AFM-Based Nanomachining
IEEE TRANSACTIONS ON NANOTECHNOLOGY, 12(5), 743–750.
author keywords: Atomic force microscope (AFM); nanomachining; tip-based nanofabrication; ultrasonic vibration
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2013 journal article
Teaching a Multidisciplinary Nanotechnology Laboratory Course to Undergraduate Students
Journal of Nano Education, 5(1), 17–26.
Sources: Crossref, NC State University Libraries
Added: January 4, 2020
2012 journal article
A 2 Degree-of-Freedom SOI-MEMS Translation Stage With Closed-Loop Positioning
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 21(1), 13–22.
Contributors: B. Koo*, X. Zhang*, n , S. Salapaka * & P. Ferreira *
author keywords: Closed-loop control; MEMS-scale nanopositioner; nanopositioning; parallel kinematic mechanism
TL;DR:
This paper presents the design, analysis, fabrication, and characterization of a closed-loop XY micropositioning stage based on a 2 degree-of-freedom parallel kinematic mechanism with linear characteristics that provides a promising pathway to closed- loop positioning microelectromechanical systems platform with applications in nanomanufacturing and metrology.
(via Semantic Scholar)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2012 journal article
A SOI-MEMS-BASED SINGLE AXIS ACTIVE PROBE FOR CELLULAR FORCE SENSING AND CELL MANIPULATION
Proceedings of the Asme International Mechanical Engineering Congress and Exposition (Imece 2010), Vol 10, 10, 537–542.
Contributors: L. Zhang n, n & Asme
Source: ORCID
Added: July 11, 2022
2012 conference paper
A process engineering perspective of scaffold fabrication methods in regenerative medicine: A review
62nd IIE Annual Conference and Expo 2012, 3096–3105. http://www.scopus.com/inward/record.url?eid=2-s2.0-84900330276&partnerID=MN8TOARS
Source: ORCID
Added: July 11, 2022
2012 conference paper
A soi-mems-based single axis active probe for cellular force sensing and cell manipulation
Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), vol 10, 537–542.
Source: NC State University Libraries
Added: August 6, 2018
2012 journal article
Biodegradable Photo-Crosslinked Polymer Substrates with Concentric Microgrooves for Regulating MC3T3-E1 Cell Behavior
ADVANCED HEALTHCARE MATERIALS, 1(3), 292–301.
MeSH headings : 3T3 Cells; Absorbable Implants; Animals; Biocompatible Materials / chemistry; Biocompatible Materials / radiation effects; Bioprinting / instrumentation; Bioprinting / methods; Cell Adhesion / physiology; Cell Proliferation; Cross-Linking Reagents / chemistry; Cross-Linking Reagents / radiation effects; Light; Materials Testing; Mice; Polyesters / chemistry; Polyesters / radiation effects; Surface Properties; Tissue Engineering / methods
TL;DR:
Microgroove dimensions could regulate mouse pre‐osteoblastic MC3T3‐E1 cell alignment, nuclear shape and distribution, mineralization, and gene expression, and higher mineral deposition and upregulation of osteocalcin gene expression were found in the narrower microgrooves when the groove depth was 10 μm.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2012 journal article
DESIGN OF A HIGH-BANDWIDTH XY NANOPOSITIONING STAGE FOR HIGH-THROUGHPUT MICRO/NANO MANUFACTURING
Proceedings of the Asme International Mechanical Engineering Congress and Exposition 2010, Vol 3, Pts a and B, 709–718. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000320286400084&KeyUID=WOS:000320286400084
Source: ORCID
Added: July 11, 2022
2012 journal article
DIRECT-DEPOSITION AND MULTIPLE MATERIALS INTEGRATION OF TISSUE ENGINEERING SCAFFOLDS
Proceedings of the Asme International Mechanical Engineering Congress and Exposition 2010, Vol 3, Pts a and B, 1083–1088. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000320286400130&KeyUID=WOS:000320286400130
Source: ORCID
Added: July 11, 2022
2012 conference paper
Design of a high-bandwidth XY nanopositioning stage for high-throughput micro/nano manufacturing
Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2010, vol 3, pts A and B, 709–718.
Source: NC State University Libraries
Added: August 6, 2018
2012 journal article
Design, Fabrication, and Testing of a SOI-MEMS-Based Active Microprobe for Potential Cellular Force Sensing Applications
Advances in Mechanical Engineering, 2012, 324–349.
Contributors: L. Zhang n & n
Sources: ORCID, NC State University Libraries, NC State University Libraries
Added: August 6, 2018
2012 conference paper
Direct-deposition and multiple materials integration of tissue engineering scaffolds
Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2010, vol 3, pts A and B, 1083–1088.
Source: NC State University Libraries
Added: August 6, 2018
2012 journal article
High-precision flexible fabrication of tissue engineering scaffolds using distinct polymers
Biofabrication, 4(2).
TL;DR:
A multi-nozzle-based versatile deposition approach to flexibly construct porous tissue engineering scaffolds using distinct polymeric biomaterials such as thermoplastic and photo-crosslinkable polymers is presented.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: ORCID, NC State University Libraries, NC State University Libraries
Added: August 6, 2018
2012 journal article
High-rate tunable ultrasonic force regulated nanomachining lithography with an atomic force microscope
Nanotechnology, 23(8).
Contributors: L. Zhang n & n
MeSH headings : Materials Testing; Microscopy, Atomic Force / methods; Nanostructures / chemistry; Nanostructures / ultrastructure; Nanotechnology / methods; Particle Size; Sonication / methods; Stress, Mechanical; Surface Properties
TL;DR:
This paper describes a high-rate tunable nanomachining-based nanolithography technique using an atomic force microscope (AFM) to increase the lithographical speed and controllability of the nanomachine process.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: ORCID, NC State University Libraries, NC State University Libraries
Added: August 6, 2018
2012 conference paper
Multi-material fabrication of tissue engineering scaffold
Transactions of the North American Manufacturing Research Institution of SME, 40, 126–132. http://www.scopus.com/inward/record.url?eid=2-s2.0-84869826114&partnerID=MN8TOARS
Source: ORCID
Added: July 11, 2022
2012 journal article
Photocured Biodegradable Polymer Substrates of Varying Stiffness and Microgroove Dimensions for Promoting Nerve Cell Guidance and Differentiation
LANGMUIR, 28(34), 12557–12568.
MeSH headings : Animals; Biocompatible Materials / chemistry; Biocompatible Materials / pharmacology; Cell Adhesion / drug effects; Cell Differentiation / drug effects; Cell Movement / drug effects; Cell Proliferation / drug effects; Mechanical Phenomena; Neuroglia / cytology; Neuroglia / drug effects; Neurons / cytology; Neurons / drug effects; PC12 Cells; Photochemical Processes; Polyesters / chemistry; Polyesters / pharmacology; Rats; Regeneration / drug effects; Tissue Scaffolds / chemistry
TL;DR:
The present results not only improve the fundamental understanding on nerve cell-substrate interactions, but also offer useful conduit materials and appropriate feature dimensions to foster guidance for axonal growth in peripheral nerve regeneration.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2012 conference paper
Ultrasonic vibration assisted nanomachining on PMMA with an AFM
Technical Paper - Society of Manufacturing Engineers, TP12PUB71, 631–637. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880696152&partnerID=MN8TOARS
Source: ORCID
Added: July 11, 2022
2011 conference paper
A two degree-of-freedom soi-mems translation stage with closed loop positioning
Proceedings - ASPE 2011 Annual Meeting, 52, 87–89. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884296523&partnerID=MN8TOARS
Source: ORCID
Added: July 11, 2022
2011 journal article
Biodegradable elastomeric substrates with concentric microgrooves for regulating MC3T3 cell behavior
Abstracts of Papers of the American Chemical Society, 242. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000299378306557&KeyUID=WOS:000299378306557
Source: ORCID
Added: July 11, 2022
2011 journal article
Biodegradable elastomeric substrates with micro-fabricated grooves for promoting neurite extension
Abstracts of Papers of the American Chemical Society, 242. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000299378306551&KeyUID=WOS:000299378306551
Source: ORCID
Added: July 11, 2022
2011 journal article
Development of a High-Bandwidth XY Nanopositioning Stage for High-Rate Micro-/Nanomanufacturing
IEEE-ASME TRANSACTIONS ON MECHATRONICS, 16(4), 724–733.
Contributors: S. Polit n & n
author keywords: Flexure stage; nanopositioning; parallel kinematic mechanism (PKM); piezoelectric actuator
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2010 journal article
Combined H-infinity-Feedback Control and Iterative Learning Control Design With Application to Nanopositioning Systems
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 18(2), 336–351.
Contributors: B. Helfrich*, C. Lee *, D. Bristow*, X. Xiao*, n , A. Alleyne *, S. Salapaka *, P. Ferreira *
author keywords: Iterative learning control (ILC); nanopositioning; precision motion control (PMC)
UN Sustainable Development Goal Categories
11. Sustainable Cities and Communities
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2010 conference paper
Design of a high-bandwidth XY nanopositioning stage for high-throughput micro/nano manufacturing
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 3(PARTS A AND B), 709–718.
Source: ORCID
Added: July 11, 2022
2010 conference paper
Direct-deposition and multiple materials integration of tissue engineering scaffolds
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 3(PARTS A AND B), 1083–1088.
Source: ORCID
Added: July 11, 2022
2010 journal article
NANO-MANIPULATION DEVICE WITH PARALLEL KINEMATIC MICRO-POSITIONING STAGE AND INTEGRATED ACTIVE CANTILEVER
Imece 2009: Proceedings of the Asme International Mechanical Engineering Congress and Exposition, Vol 12, Pts a and B, 405–413. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000280203700060&KeyUID=WOS:000280203700060
Source: ORCID
Added: July 11, 2022
2010 conference paper
Nano-manipulation device with parallel kinematic micro-positioning stage and integrated active cantilever
Imece 2009: Proceedings of the Asme International Mechanical Engineering Congress and Exposition, Vol 12, Pts a and B, 12(PART A), 405–413.
Contributors: n & P. Ferreira *
Source: ORCID
Added: July 11, 2022
2009 journal article
Design of high-bandwidth high-precision flexure-based nanopositioning modules
JOURNAL OF MANUFACTURING SYSTEMS, 28(2-3), 71–77.
Contributors: S. Polit n & n
UN Sustainable Development Goal Categories
16. Peace, Justice and Strong Institutions
(OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2009 journal article
Electrostatically Actuated Cantilever With SOI-MEMS Parallel Kinematic XY Stage
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 18(3), 641–651.
Contributors: n & P. Ferreira *
author keywords: Active cantilever; comb drive; micropositioning stage; parallel kinematic mechanism (PKM); tilt-plate actuator
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2008 journal article
A SOI-MEMS-based 3-DOF planar parallel-kinematics nanopositioning stage
Sensors and Actuators a-Physical, 147(1), 340–351.
Contributors: D. Mukhopadhyay*, * , E. Pengwang* & P. Ferreira *
author keywords: SOI-MEMS; 3-DOF planar PKMs; micro/nanopositioning stages; MEMS-XY theta stages
Source: ORCID
Added: July 11, 2022
2008 journal article
A novel parallel-kinematics mechanism for integrated, multi-axis nanopositioning - Part 2: Dynamics, control and performance analysis
Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology, 32(1), 20–33.
Contributors: * , Q. Yao * & P. Ferreira *
author keywords: nano-positioning; parallel-kinematics; flexure stage; motion control; contouring errors
Source: ORCID
Added: July 11, 2022
2008 journal article
A novel parallel-kinematics mechanisms for integrated, multi-axis nanopositioning - Part 1. Kinematics and design for fabrication
Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology, 32(1), 7–19.
author keywords: nanopositioning; parallel-kinematics; flexure stage; kinematic analysis; stage design
Source: ORCID
Added: July 11, 2022
2008 chapter
Combined H-infinity-feedback and Iterative Learning Control design with application to nanopositioning systems
In 2008 American Control Conference, Vols 1-12 (pp. 3893–3900).
Contributors: B. Helfrich*, C. Lee*, D. Bristow*, X. Xiao*, * , A. Alleyne*, S. Salapaka *, P. Ferreira *, Ieee
UN Sustainable Development Goal Categories
16. Peace, Justice and Strong Institutions
(OpenAlex)
Source: ORCID
Added: July 11, 2022
2008 journal article
High bandwidth control of precision motion instrumentation
Review of Scientific Instruments, 79(10).
Contributors: D. Bristow*, * , A. Alleyne*, P. Ferreira * & S. Salapaka *
author keywords: adaptive control; feedforward; iterative methods; learning systems; motion control; physical instrumentation control; piezoelectric actuators
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Source: ORCID
Added: July 11, 2022
2008 journal article
MIMO H-infinity control of a parallel kinematic XYZ nano-positioner
International Mechanical Engineering Congress and Exposition 2007, Vol 11 Pt a and Pt B: Micro and Nano Systems, 145–153.
Source: ORCID
Added: July 11, 2022
2008 conference paper
MIMO H<inf>∞</inf> control of a parallel kinematic XYZ nano-positioner
ASME International Mechanical Engineering Congress and Exposition, Proceedings, 11 PART A, 145–153.
Contributors: * , S. Salapaka * & P. Ferreira *
UN Sustainable Development Goal Categories
16. Peace, Justice and Strong Institutions
(OpenAlex)
Source: ORCID
Added: July 11, 2022
2008 chapter
Parallel kinematic mechanism based monolithic XY micro-positioning stage with rotary comb drive actuators - art. no. 688209
In Micromachining and Microfabrication Process Technology Xiii (Vol. 6882, p. 88209).
author keywords: rotary comb drives; nano positioning; micro positioning; silicon-on-insulator; parallel kinematic mechanism
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Source: ORCID
Added: July 11, 2022
2008 conference paper
Parallel-kinematics mems stages for high precision nanopositioning and manipulation
Proceedings of the 23rd Annual Meeting of the American Society for Precision Engineering, ASPE 2008 and the 12th ICPE. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884962392&partnerID=MN8TOARS
Source: ORCID
Added: July 11, 2022
2008 journal article
Robust control of a parallel-kinematic nanopositioner
Journal of Dynamic Systems, Measurement, and Control, 130(4), 0410071–04100715.
Contributors: * , S. Salapaka * & P. Ferreira *
UN Sustainable Development Goal Categories
16. Peace, Justice and Strong Institutions
(OpenAlex)
Source: ORCID
Added: July 11, 2022
2008 chapter
Self-calibration of a dual-actuated single-axis nanopositioner using measurement transitivity with extensions to calibration of two-axis systems
In M. T. Postek & J. A. Allgair (Eds.), Instrumentation, Metrology, and Standards for Nanomanufacturing Ii (Vol. 7042).
Contributors: Y. Jeong *, * & P. Ferreira*
Ed(s): M. Postek & J. Allgair
Event: at Bellingham
author keywords: nanopositioning; self-calibration; flexure stage; metrology; auto-calibration; machine-tool calibration; positioning error; position sensing
Source: ORCID
Added: July 11, 2022
2008 journal article
Self-calibration of dual-actuated single-axis nanopositioners
Measurement Science &Amp; Technology, 19(4).
Contributors: Y. Jeong *, * & P. Ferreira *
author keywords: self-calibration; auto-calibration; nanopositioning; metrology; dual-stage actuation
TL;DR:
An approach to implementing self-calibration on a single-axis, dual-actuated, nanopositioning stage is introduced and it is demonstrated how dual actuation on such a system can be used to implement the transitivity and redundancy conditions required for dimensional self-Calibration so that only a single scaling input is required.
(via Semantic Scholar)
Source: ORCID
Added: July 11, 2022
2008 journal article
Simultaneous actuation and displacement sensing for electrostatic drives
Journal of Micromechanics and Microengineering, 18(3).
Contributors: * & P. Ferreira *
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Source: ORCID
Added: July 11, 2022
2007 journal article
Design, analysis, fabrication and testing of a parallel-kinematic micropositioning XY stage
International Journal of Machine Tools &Amp; Manufacture, 47(6), 946–961.
Contributors: Q. Yao *, * & P. Ferreira *
author keywords: micropositioning; nanopositioning; XY stage; parallel kinematics; piezoelectric actuator; flexure stage
Source: ORCID
Added: July 11, 2022
2007 journal article
Design, fabrication and testing of a silicon-on-insulator (SOI) MEMS parallel kinematics XY stage
Journal of Micromechanics and Microengineering, 17(6), 1154–1161.
Contributors: * , D. Mukhopadhyay* & P. Ferreira *
Source: ORCID
Added: July 11, 2022
2007 journal article
Feed-rate optimization with jerk constraints for generating minimum-time trajectories
International Journal of Machine Tools &Amp; Manufacture, 47(12-13), 1941–1955.
Contributors: * , P. Ferreira * & J. Stori*
author keywords: trajectory planning; minimum-time trajectory; optimal control; feed-rate optimization; NC programming; jerk constraints
TL;DR:
A new acceleration-continuation procedure is added to the feedrate optimization algorithm to address jerk constraints and remove discontinuities in the acceleration profile, maintaining computational efficiency and supports the incorporation of a variety of state-dependent constraints.
(via Semantic Scholar)
Source: ORCID
Added: July 11, 2022
2007 conference paper
MIMO H∞ control of a parallel kinematic XYZ nano-positioner
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 11, 145–153.
Source: ORCID
Added: July 11, 2022
2007 journal article
Optimal feed-rate scheduling for high-speed contouring
Journal of Manufacturing Science and Engineering-Transactions of the Asme, 129(1), 63–76.
author keywords: high-speed machining; contour error; feed-rate optimization
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Source: ORCID
Added: July 11, 2022
2007 journal article
Printable single-crystal silicon micro/nanoscale ribbons, platelets and bars generated from bulk wafers
Advanced Functional Materials, 17(16), 3051–3062.
Contributors: A. Baca *, M. Meitl*, H. Ko *, S. Mack *, H. Kim*, * , P. Ferreira *, J. Rogers *
Source: ORCID
Added: July 11, 2022
2007 conference paper
Robust MIMO control of a parallel kinematics nano-positioner for high resolution high bandwidth tracking and repetitive tasks
Proceedings of the IEEE Conference on Decision and Control, 4495–4500.
Contributors: * , S. Salapaka * & P. Ferreira *
TL;DR:
A robust control design is presented that gives a significant (over thirty fold) improvement in tracking of repetitive motions on a prespecified frequency band and is robust to modeling uncertainties that arise in flexure based mechanisms.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
16. Peace, Justice and Strong Institutions
(OpenAlex)
Source: ORCID
Added: July 11, 2022
2007 chapter
Robust MIMO control of a parallel kinematics nano-positioner for high resolution high bandwidth tracking and repetitive tasks
In Proceedings of the 46th Ieee Conference on Decision and Control, Vols 1-14 (pp. 1899–1904). http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000255181701011&KeyUID=WOS:000255181701011
Source: ORCID
Added: July 11, 2022
2007 journal article
Stress focusing for controlled fracture in microelectromechanical systems
Applied Physics Letters, 90(8).
Contributors: M. Meitl*, X. Feng *, * , E. Menard*, P. Ferreira *, Y. Huang *, J. Rogers
Source: ORCID
Added: July 11, 2022
2006 journal article
A generalized time-optimal bidirectional scan algorithm for constrained feed-rate optimization
Journal of Dynamic Systems, Measurement, and Control, 128(2), 379–390.
author keywords: two-pass (bidirectional scan) algorithm; minimum-time trajectory; optimal control; feed-rate optimization
TL;DR:
The two-pass feed-rate optimization algorithm is generalized and a proof of global optimality is provided, which shows that the algorithm does generate a globally optimal solution under various types of constraints.
(via Semantic Scholar)
Source: ORCID
Added: July 11, 2022
2004 conference paper
A generalized time-optimal Bi-directional scan algorithm for constrained feedrate optimization
American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 15, 725–739.
TL;DR:
The two-pass feedrate optimization algorithm is extended and generalized, and the generalized algorithm maintains computationally efficiency, and supports the incorporation of a variety of state dependent constraints.
(via Semantic Scholar)
Source: ORCID
Added: July 11, 2022
2004 journal article
Development of a high-speed 3-axis machine tool using a novel parallel-kinematics X-Y table
International Journal of Machine Tools &Amp; Manufacture, 44(12-13), 1355–1371.
Contributors: * , C. Yuan *, J. Stori* & P. Ferreira *
author keywords: high-speed machining; parallel-kinematics machine tool
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Source: ORCID
Added: July 11, 2022
2003 conference paper
Optimal feed-rate scheduling for high-speed contouring
Manufacturing, 14, 497–513.
TL;DR:
This work presents a computationally efficient algorithm for generating a minimum-time feed-rate profile subject to the above constraints, and demonstrates that significant improvements in contouring accuracy can be realized through such an approach.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Source: ORCID
Added: July 11, 2022
Employment
Updated: September 4th, 2020 00:51
2020 - present
North Carolina State University Raleigh, NC, US
Professor
Department of Industrial and Systems Engineering
2014 - 2020
North Carolina State University Raleigh, NC, US
Associate Professor
Department of Industrial and Systems Engineering
2008 - 2014
North Carolina State University Raleigh, NC, US
Assistant Professor
Department of Industrial and Systems Engineering
Education
Updated: May 11th, 2021 11:52
2006 - 2008
University of Illinois at Urbana-Champaign Urbana, Illinois, US
PostDoc
Mechanical Engineering
2001 - 2006
University of Illinois at Urbana-Champaign Urbana, IL, US
PhD
Mechanical and Industrial Engineering
1998 - 2001
Institute of Automation, Chinese Academy of Sciences Beijing, CN
M.S.
1993 - 1998
University of Science and Technology of China Hefei, Anhui, CN
B.S.
Funding History
Funding history based on the linked ORCID record. Updated: June 21st, 2022 10:40
grant
January 1, 2022 - December 31, 2025
FMRG: Eco: Future Eco Manufacturing of Recyclable Soft Electronics
Directorate for Engineering
grant
July 1, 2017 - June 30, 2022
SNM: Large-area Printing and Integration of Metal Nanowires and Organic Semiconductors for Stretchable Electronics and Sensors
Directorate for Engineering
grant
December 1, 2013 - November 30, 2017
SNM: Continuous Vapor-Phase Processes for Nano-Functional Fibrous Materials Manufacturing
Directorate for Engineering
grant
September 1, 2013 - August 31, 2018
Investigation of Electrohydrodynamic 3D Printing for Super-Resolution Additive Manufacturing
Directorate for Engineering
grant
September 15, 2012 - August 31, 2016
Ultrasonic Vibration Assisted NanoMachining for High-rate Tunable 2D and 3D Nanofabrication
Directorate for Engineering
grant
September 1, 2011 - August 31, 2015
Collaborative Research: Defect Modeling and Process Optimization for Nanowire Growth towards Improved Nanodevice Reliability
Directorate for Engineering
grant
March 15, 2011 - May 31, 2013
EAGER: Engineering for Regenerative Medicine
Directorate for Engineering
grant
January 1, 2011 - June 30, 2013
Bottom-Up Meets Top-Down - An Integrated Undergraduate Nanotechnology Laboratory at NC State
Directorate for Engineering
grant
July 1, 2008 - June 30, 2012
A Configurable Platform for Multicantilever High-Throughput Nanoscale Metrology and Manufacturing
Directorate for Engineering
Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.
Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.
