Jong Eun Ryu

A 400W, 250kHz (2kW Peak) Integrated GaN Half Bridge Power Module in a Non-Isolated Buck Converter

2024 IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, APEC, pp. 168–174.

Deep Neural Network-Based Temperature Mapping Technique for Heat Sink on Electronic Devices Using Local Thermocouple Sensors

APPLIED ARTIFICIAL INTELLIGENCE, 38(1).

Dynamic Behavior of Ribbed Viscoelastic CNT-PDMS Thin-Films for Multifunctional Applications

Phillips, M., Chen, M.-J., Ryu, J., & Zikry, M. (2024, September 12). MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. 9.

Enhanced polarization retention and softening in [001]-oriented Pb(Mg_1/3Nb_2/3)-PbTiO₃ single crystals through corona poling

Sun, J.-W., Choi, W.-J., Yu, H.-L., Lee, S.-G., Ryu, J. E., Zate, T. T., & Jo, W. (2024, April 15). JOURNAL OF THE KOREAN CERAMIC SOCIETY, Vol. 4.

Microstructural behavior of CNT-PDMS thin-films for multifunctional systems

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 187.

Rheological Behavior and Roll Coating Properties of PDMS Enhanced with Multi-Walled Carbon Nanotubes and Fumed Silica

ACS APPLIED ENGINEERING MATERIALS, 2(3), 618–627.

Sol-gel fabricated one-dimensional LiFePO₄ microstructures for carbon nanotube-based nanocomposite freestanding sheet as cathode material for Li ion batteries

Al Shibli, H., Chaturvedi, P., Kanagaraj, A. B., Zaghari, P., Choi, D. S., & Ryu, J. E. (2024, January 2). JOURNAL OF COMPOSITE MATERIALS, Vol. 1.

Understanding thermal depolarization via thermally stimulated depolarization current measurement

Sun, J.-W., Zate, T. T., Choi, W.-J., Lee, G.-J., Lee, S.-G., Ryu, J. E., & Jo, W. (2024, April 15). JOURNAL OF THE KOREAN CERAMIC SOCIETY, Vol. 4.

A scalable microstructure photonic coating fabricated by roll-to-roll “defects” for daytime sub-ambient passive radiative cooling

Nano Letters, 23(17), 7767–7774.

Numerical and experimental studies on design of multi-lumen tube extruded with drawing and air flow

JOURNAL OF MANUFACTURING PROCESSES, 106, 88–101.

Predicting and Controlling Ribbing Instabilities of Carbon Nanotube-PDMS Thin-Film Systems for Multifunctional Applications

Phillips, M., Chen, M.-J., Islam, M. D., Ryu, J., & Zikry, M. (2023, July 19). ADVANCED ENGINEERING MATERIALS, Vol. 7.

Template-free scalable roll-to-roll fabrication of textured transparent film for passive radiation cooling of photovoltaics

Harbinson, M., Pudlo, M., Liu, S., Chaudhry, T., Liu, Y., Sui, C., … Ryu, J. E. (2023, August). MANUFACTURING LETTERS, Vol. 35, pp. 166–173.

Thermal Cycling and Fatigue Life Analysis of a Laterally Conducting GaN-based Power Package

2023 IEEE International 3D Systems Integration Conference (3DIC). Presented at the 2023 IEEE International 3D Systems Integration Conference (3DIC).

Fabrication of Bioinspired Micro/Nano-Textured Surfaces Through Scalable Roll Coating Manufacturing

Journal of Micro and Nano-Manufacturing, 10(2), 021006.

Multiphysics FEA Simulation for Polymer Nanocomposite Laser Ultrasound Transducer

2022 IEEE 22nd International Conference on Nanotechnology (NANO), 249–252.

Multiscale and multiphysics FEA simulation and materials optimization for laser ultrasound transducers

Materials Today Communications, 31, 103599.

Physics-based Computational Method Predicting the Dielectric Properties of Polymer Nanocomposites

Islam, M. D., Liu, S., Choi, D., Guo, Z., & Ryu, J. E. (2022, April 9). APPLIED COMPOSITE MATERIALS, Vol. 29.

Template-free scalable fabrication of linearly periodic microstructures by controlling ribbing defects phenomenon during forward roll coating

Manufacturing Letters, 33, 153–160.

Template‐Free Scalable Fabrication of Linearly Periodic Microstructures by Controlling Ribbing Defects Phenomenon in Forward Roll Coating for Multifunctional Applications

Advanced Materials Interfaces, 9(27), 2201237.

Novel computational design of high refractive index nanocomposites and effective refractive index tuning based on nanoparticle morphology effect

COMPOSITES PART B-ENGINEERING, 223.

The polymer nanocomposites embedded particles size and agglomeration effect on the effective refractive index tuning

(W. Park, A.-J. Attias, & B. Panchapakesan, Eds.). NANOENGINEERING: FABRICATION, PROPERTIES, OPTICS, THIN FILMS, AND DEVICES XVIII, Vol. 11802.

A Combined Modeling and Experimental Study of Tensile Properties of Additively Manufactured Polymeric Composite Materials

Journal of Materials Engineering and Performance, 29(4), 2597–2604.

Advances in Responsively Conductive Polymer Composites and Sensing Applications

Polymer Reviews, 61(1), 157–193.

Controlled short time large scale synthesis of magnetic cobalt nanoparticles on carbon nanotubes by flash annealing

JOURNAL OF APPLIED PHYSICS, 127(4).

Design of High Efficient Mid‐Wavelength Infrared Polarizer on ORMOCHALC Polymer

Macromolecular Materials and Engineering, 305(5), 2000033.

Electrochemical characterization of LiMn2O4 nanowires fabricated by sol-gel for lithium-ion rechargeable batteries

MATERIALS LETTERS, 273.

Enhanced mid-wavelength infrared refractive index of organically modified chalcogenide (ORMOCHALC) polymer nanocomposites with thermomechanical stability

OPTICAL MATERIALS, 108.

Influence of Reflow Profile on Thermal Fatigue Behaviors of Solder Ball Joints

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 29(6), 4095–4104.

Polyethylene Glycol/Carbon Black Shape-Stable Phase Change Composites for Peak Load Regulating of Electric Power System and Corresponding Thermal Energy Storage

Engineered Science, 9, 25–34.

Recent Advances in Organic/Composite Phase Change Materials for Energy Storage

ES Energy & Environment, 9, 28–40.

Significantly Enhanced Ultrathin NiCo-based MOF Nanosheet Electrodes Hybrided with Ti3C2Tx MXene for High Performance Asymmetric Supercapacitors

Engineered Science, 9, 50–59.

Development and Application of Hot Embossing in Polymer Processing: A Review

ES Materials & Manufacturing, 6, 3–17.

Electrochemically grown vertical CdTe nanowire arrays on a flexible/transparent substrate

MATERIALS LETTERS, 253, 113–116.

Fabrication of Nano-Patterned Arrays Using Pulsed Light Technique

Engineered Science, 7, 59–64.

Fabrication of graphene-magnetite multi-granule nanocluster composites for microwave absorption application

Journal of Composite Materials, 53(28-30), 4097–4103.

Hierarchical Assembly of CuO Nano-Dandelions on 3-D Printed Template

Engineered Science, 6, 86–89.

Poly(sulfur-random-(1,3-diisopropenylbenzene)) based mid-wavelength infrared polarizer: Optical property experimental and theoretical analysis

POLYMER, 176, 118–126.

Dynamic oscillatory rheological properties of polystyrene/poly(methyl methacrylate) blends and their composites in the presence of carbon black

Engineered Science, 1, 86–94.

Fabrication and electrochemical characterization of super-capacitor based on three-dimensional composite structure of graphene and a vertical array of carbon nanotubes

Journal of Composite Materials, 52(22), 3039–3044.

Fabrication of three-dimensional electrical patterns by swollen-off process: An evolution of the lift-off process

Current Applied Physics, 18(11), 1235–1239.

Fabry-Perot cavity resonance enabling highly polarization-sensitive double-layer gold grating

Scientific Reports, 8(14787).

Ionic liquid-assisted synthesis of Yb3+-Tm3+ codoped Y7O6F9 petal shaped microcrystals with enhanced upconversion emission

Materials Research Bulletin, 103, 19–24.

Material models and finite analysis of additively printed polymer composites

Journal of Composite Materials, 53(3), 361–371.

Material models and finite analysis of additively printed polymer composites

Journal of Composite Materials, 53(3), 361–371.

Microwave absorption properties of magnetite multi-granule nanocluster–multiwall carbon nanotube composites

Functional Materials Letters, 12(2), 1950011.

Simulation and validation of three dimension functionally graded materials by material jetting

Additive Manufacturing, 22, 351–359.

Flexible polydimethylsiloxane/multi-walled carbon nanotubes membranous metacomposites with negative permittivity

Polymer, 125, 50–57.

Formation of high aspect ratio fused silica nanowalls by fluorine-based deep reactive ion etching

Nano-Structures & Nano-Objects, 15, 212–215.

Layer-by-layer grafting CNTs onto carbon fibers surface for enhancing the interfacial properties of epoxy resin composites

Composites Science and Technology, 154, 28–36.

Microfluidic channel for characterizing normal and breast cancer cells

Journal of Micromechanics and Microengineering, 27(3), 035017.

Poly(vinylidene fluoride) derived fluorine-doped magnetic carbon nanoadsorbents for enhanced chromium removal

Carbon, 115, 503–514.

Pulsed light sintering of silver nanoparticles for large deformation of printed stretchable electronics

Advanced Composites and Hybrid Materials, 1(1), 193–198.

Reduction in Migratory Phenotype in a Metastasized Breast Cancer Cell Line via Downregulation of S100A4 and GRM3

Scientific Reports, 7(1), 3459–3460.

Tunable and weakly negative permittivity in carbon/silicon nitride composites with different carbonizing temperatures

Carbon, 125, 103–112.

Tunable cobalt nanoparticle synthesis by intense pulse flash annealing

AIP Advances, 7(5), 056308.

3 Dimensional-Printed Micro-Container with Graphene Current Collector and Manganese Oxide Thin-Film as Cathodes of Li-Batteries

Nanoscience and Nanotechnology Letters, 8(12), 1095–1098.

Micro-capacitor with vertically grown silver nanowires and bismuth ferric oxide composite structures on silicon substrates

Journal of Composite Materials, 51(7), 965–969.

Radio frequency-mediated local thermotherapy for destruction of pancreatic tumors using Ni–Au core–shell nanowires

Nanotechnology, 28(3), 03LT01.

Reinforcement of Cu nanoink sintered film with extended carbon nanofibers for large deformation of printed electronics

Journal of Composite Materials, 51(7), 997–1003.

Scalable nanoparticle assembly on carbon nanotubes using flash-induced dewetting

Journal of Composite Materials, 51(9), 1299–1305.

Intracellular delivery of top-down fabricated tunable nano-plasmonic resonators

Nanoscale, 5(21), 10179.

Polypyrrole Metacomposites with Different Nanostructures

Journal of Materials Chemistry, 22(11), 4996–5005.

Synthetic process engineered polyaniline nanostructures with tunable morphology and physical properties

Polymer, 53(10), 2109–2120.

Electrical and dielectric properties of polyaniline–Al2O3 nanocomposites derived from various Al2O3 nanostructures

Journal of Materials Chemistry, 21(11), 3952.

Poly(propylene)/Graphene Nanoplatelet Nanocomposites: Melt Rheological Behavior and Thermal, Electrical, and Electronic Properties

Macromolecular Chemistry and Physics, 212(18), 1951–1959.

Sintering of Inkjet-Printed Silver Nanoparticles at Room Temperature Using Intense Pulsed Light

Journal of Electronic Materials, 40(11), 2268–2277.

Strain-Sensing Elastomer/Carbon Nanofiber “Metacomposites”

Strain-Sensing Elastomer/Carbon Nanofiber “Metacomposites.” The Journal of Physical Chemistry C, 115(27), 13215–13222.

Subcellular Resolution Mapping of Endogenous Cytokine Secretion by Nano-Plasmonic-Resonator Sensor Array

Nano Letters, 11(8), 3431–3434.

Carbon Nanotube Mat as Mediator-Less Glucose Sensor Electrode

Journal of Nanoscience and Nanotechnology, 10(2), 941–947.

Conductive Polypyrrole/Tungsten Oxide Metacomposites with Negative Permittivity

The Journal of Physical Chemistry C, 114(39), 16335–16342.

In situ stabilized carbon nanofiber (CNF) reinforced epoxy nanocomposites

Journal of Materials Chemistry, 20(23), 4937–4948.

Inkjet printed electronics using copper nanoparticle ink

Journal of Materials Science: Materials in Electronics, 21(11), 1213–1220.

Intense pulsed light induced platinum–gold alloy formation on carbon nanotubes for non-enzymatic glucose detection

Biosensors and Bioelectronics, 26(2), 602–607.

Investigation of moisture-induced delamination failure in a semiconductor package via multi-scale mechanics

Journal of Physics D: Applied Physics, 44(3), 034007.

Magnetic Epoxy Resin Nanocomposites Reinforced with Core−Shell Structured Fe@FeO Nanoparticles: Fabrication and Property Analysis

ACS Applied Materials & Interfaces, 2(7), 2100–2107.

Polyaniline-tungsten oxide metacomposites with tunable electronic properties

J. Mater. Chem., 21(2), 342–348.

Reactive Sintering of Copper Nanoparticles Using Intense Pulsed Light for Printed Electronics

Journal of Electronic Materials, 40(1), 42–50.

Carbon nanotubes with platinum nano-islands as glucose biofuel cell electrodes

Biosensors and Bioelectronics, 25(7), 1603–1608.

Electrophoretic Layer-by-Layer Assembly of Biotin/Avidin Functionalized Nanoparticles

Particle & Particle Systems Characterization, 26(5-6), 275–282.