Kinga Unocic
Cordon, M. J., Li, M., Yang, X., Neate, P. G. N., Unocic, K. A., Li, Z., … Sutton, A. D. (2024). Butene-Rich Alkene Formation from 2,3-Butanediol through Dioxolane Intermediates. ACS Sustainable Chemistry & Engineering, 12(23), 8702–8716. https://doi.org/10.1021/acssuschemeng.4c01155
Purdy, S. C., Collinge, G., Zhang, J., Borate, S. N., Unocic, K. A., Wu, Q., … Li, Z. (2024). Dynamic Copper Site Redispersion through Atom Trapping in Zeolite Defects. Journal of the American Chemical Society, 146(12), 8280–8297. https://doi.org/10.1021/jacs.3c13302
Cagli, E., Klemm, A., Ali, A., Gai, Z., Unocic, K. A., Kidder, M. K., & Gurkan, B. (2024). Tuning Surface, Phase, and Magnetization of Superparamagnetic Magnetite by Ionic Liquids: Single-Step Microwave-Assisted Synthesis. ACS Applied Materials & Interfaces, 4. https://doi.org/10.1021/acsami.4c02000
Kannan, R., Lee, Y., Pierce, D., Unocic, K., Fillingim, B., Feldhausen, T., … Nandwana, P. (2023). Additive manufacturing as a processing route for steel-aluminum bimetallic structures. Materials & Design, 231, 112003. https://doi.org/10.1016/j.matdes.2023.112003
Yung, M. M., Mukarakate, C., Iisa, K., Wilson, A. N., Nimlos, M. R., Habas, S. E., … Griffin, M. B. (2023). Advancements and challenges in the production of low-carbon fuels via catalytic fast pyrolysis of biomass through refinery integration and co-product generation. Green Chemistry, 25(17), 6809–6822. https://doi.org/10.1039/D3GC01574B
LiBretto, N. J., Tacey, S. A., Zubair, M., Bui, T. V., Unocic, K. A., Baddour, F. G., … Habas, S. E. (2023). Compositional dependence of hydrodeoxygenation pathway selectivity for Ni2−xRhxP nanoparticle catalysts. Journal of Materials Chemistry A, 11(31), 16788–16802. https://doi.org/10.1039/D3TA02071A
Alegre-Requena, J. V., Hafenstine, G. R., Huo, X., Guan, Y., Stunkel, J., Baddour, F. G., … Kim, S. (2023). Experimental and computational studies of the production of 1,3-butadiene from 2,3-butanediol using SiO2-supported H3PO4 derivatives. Chemical Engineering Journal, 466, 143346. https://doi.org/10.1016/j.cej.2023.143346
Cramer, C. L., Cakmak, E., & Unocic, K. A. (2023). Hardness Measurements and Interface Behavior of SiC-B4C-Si Multiple Phase Particulate Composites Made with Melt Infiltration and Additive Manufacturing. Journal of Composites Science, 7(4), 172. https://doi.org/10.3390/jcs7040172
Unocic, K. A., Purdy, S. C., Allard, L. F., Collinge, G. B., Zhang, J., Borate, S. N., … Li, Z. (2023). Investigation of Cu Species in Dealuminated Beta Zeolite Studied by Operando Closed-Cell Gas Reaction STEM. Microscopy and Microanalysis, 29(Supplement_1), 1614–1615. https://doi.org/10.1093/micmic/ozad067.829
Lach, T. G., Gussev, M. N., Unocic, K. A., Zhong, W., Godfrey, A., & McClintock, D. A. (2023). Multimodal Characterization of Stored Energy and Gas-Filled Cavities in FCC Alloys Irradiated with Spallation Neutrons and High-Energy Protons. Microscopy and Microanalysis, 29(Supplement_1), 1538–1540. https://doi.org/10.1093/micmic/ozad067.792
Allard, L. F., Unocic, K. A., Datye, A. K., & Mansfield, J. M. (2023). Professor Wilbur C. Bigelow: A Centenary Celebration. Microscopy and Microanalysis, 29(Supplement_1), 1566–1568. https://doi.org/10.1093/micmic/ozad067.806
Zhou, G., Unocic, K. A., Wang, C., Shan, Z., Haigh, S. J., & Yang, J. C. (2023). Revealing atomic-to-nanoscale oxidation mechanisms of metallic materials. MRS Bulletin, 48(8), 852–863. https://doi.org/10.1557/s43577-023-00595-4
Li, M., Zhang, J., Purdy, S. C., Lin, F., Unocic, K. A., Cordon, M., … Sutton, A. D. (2024). Tailoring olefin distribution via tuning rare earth metals in bifunctional Cu-RE/beta-zeolite catalysts for ethanol upgrading. Applied Catalysis B: Environmental, 344, 123648. https://doi.org/10.1016/j.apcatb.2023.123648
Downes, C. A., Van Allsburg, K. M., Tacey, S. A., Unocic, K. A., Baddour, F. G., Ruddy, D. A., … Habas, S. E. (2022). Controlled Synthesis of Transition Metal Phosphide Nanoparticles to Establish Composition-Dependent Trends in Electrocatalytic Activity. Chemistry of Materials, 34(14), 6255–6267. https://doi.org/10.1021/acs.chemmater.2c00085
Talukdar, B., Meyer, H. M., III, Mukarakate, C., Iisa, K., Griffin, M. B., Habas, S. E., & Unocic, K. A. (2022). Deactivation study on zeolite materials using XPS and STEM characterization. Microscopy and Microanalysis, 28(S1), 2472–2474. https://doi.org/10.1017/s1431927622009461
Adhikari, S., Zhang, J., Unocic, K., Wegener, E. C., Kunal, P., Deka, D. J., … Li, Z. (2022). Direct 2,3-Butanediol Conversion to Butene-Rich C3+ Olefins over Copper-Modified 2D Pillared MFI: Consequence of Reduced Diffusion Length. ACS Sustainable Chemistry & Engineering, 10(4), 1664–1674. https://doi.org/10.1021/acssuschemeng.1c07670
Cordon, M. J., Zhang, J., Samad, N. “R., Harris, J. W., Unocic, K. A., Li, M., … Li, Z. (2022). Ethanol Conversion to C4+ Olefins over Bimetallic Copper- And Lanthanum-Containing Beta Zeolite Catalysts. ACS Sustainable Chemistry & Engineering, 10(18), 5702–5707. https://doi.org/10.1021/acssuschemeng.1c07442
Dryepondt, S., Nandwana, P., Unocic, K. A., Kannan, R., Fernandez Zelaia, P., & List, F. A., III. (2022). High temperature high strength austenitic steel fabricated by laser powder-bed fusion. Acta Materialia, 231, 117876. https://doi.org/10.1016/j.actamat.2022.117876
Mao, K. S., Massey, C. P., Yamamoto, Y., Unocic, K. A., Gussev, M. N., Zhang, D., … Edmondson, P. D. (2022). Improved irradiation resistance of accident-tolerant high-strength FeCrAl alloys with heterogeneous structures. Acta Materialia, 231, 117843. https://doi.org/10.1016/j.actamat.2022.117843
McClintock, D. A., Gussev, M. N., Campbell, C., Mao, K., Lach, T. G., Lu, W., … Unocic, K. A. (2022). Observations of radiation-enhanced ductility in irradiated Inconel 718: Tensile properties, deformation behavior, and microstructure. Acta Materialia, 231, 117889. https://doi.org/10.1016/j.actamat.2022.117889
Unocic, K. A., LiBretto, N., To, A. T., Kropf, J. A., Ruddy, D. A., Krause, T. R., … Habas, S. E. (2022). Revealing the Reaction Behavior of Co0.86Mn0.14O under H2 using in situ Closed-Cell Gas Reaction S/TEM. Microscopy and Microanalysis, 28(S1), 1884–1886. https://doi.org/10.1017/s1431927622007395
Nguyen, H., Huq, N. A., Stück, D., Tifft, S. M., Conklin, D. R., Koehler, A. J., … Vardon, D. R. (2022). Supercritical Methanol Solvolysis and Catalysis for the Conversion of Delignified Woody Biomass into Light Alcohol Gasoline Bioblendstock. Advanced Sustainable Systems, 6(4). https://doi.org/10.1002/adsu.202100310
Cavin, J., Ahmadiparidari, A., Majidi, L., Thind, A. S., Misal, S. N., Prajapati, A., … Mishra, R. (2021). 2D High‐Entropy Transition Metal Dichalcogenides for Carbon Dioxide Electrocatalysis. Advanced Materials, 33(31). https://doi.org/10.1002/adma.202100347
Fuchs, B., Qu, J., Kim, J.-Y., Unocic, K. A., Guo, Q., Ramuhalli, P., & Jacobs, L. J. (2021). Analytical modeling of the evolution of the nonlinearity parameter of sensitized stainless steel. Journal of Applied Physics, 130(16). https://doi.org/10.1063/5.0053632
McNeary, W. W., Tacey, S. A., Lahti, G. D., Conklin, D. R., Unocic, K. A., Tan, E. C. D., … Vardon, D. R. (2021). Atomic Layer Deposition with TiO2 for Enhanced Reactivity and Stability of Aromatic Hydrogenation Catalysts. ACS Catalysis, 11(14), 8538–8549. https://doi.org/10.1021/acscatal.1c02101
Nash, C. P., Dupuis, D. P., Kumar, A., Farberow, C. A., To, A. T., Yang, C., … Ruddy, D. A. (2022). Catalyst design to direct high-octane gasoline fuel properties for improved engine efficiency. Applied Catalysis B: Environmental, 301, 120801. https://doi.org/10.1016/j.apcatb.2021.120801
Huo, X., Conklin, D. R., Zhou, M., Vorotnikov, V., Assary, R. S., Purdy, S. C., … Vardon, D. R. (2021). Catalytic activity and water stability of the MgO(111) surface for 2-pentanone condensation. Applied Catalysis B: Environmental, 294, 120234. https://doi.org/10.1016/j.apcatb.2021.120234
Lin, F., Lu, Y., Unocic, K. A., Habas, S. E., Griffin, M. B., Schaidle, J. A., … Wang, H. (2021). Deactivation by Potassium Accumulation on a Pt/TiO2 Bifunctional Catalyst for Biomass Catalytic Fast Pyrolysis. ACS Catalysis, 12(1), 465–480. https://doi.org/10.1021/acscatal.1c02368
Wang, L., Mao, K., Tortorelli, P. F., Maziasz, P. J., Thangirala, M., Unocic, K. A., & Chen, X. F. (2021). Effect of heterogeneous microstructure on the tensile and creep performances of cast Haynes 282 alloy. Materials Science and Engineering: A, 828, 142099. https://doi.org/10.1016/j.msea.2021.142099
Guo, Q., Feng, T., Lance, M. J., Unocic, K. A., Pantelides, S. T., & Lara-Curzio, E. (2022). Evolution of the structure and chemical composition of the interface between multi-component silicate glasses and yttria-stabilized zirconia after 40,000 h exposure in air at 800 °C. Journal of the European Ceramic Society, 42(4), 1576–1584. https://doi.org/10.1016/j.jeurceramsoc.2021.11.013
Boebinger, M., Yarema, O., Yarema, M., Unocic, K., Unocic, R., Wood, V., & McDowell, M. (2021). In Situ TEM Investigation of the Spontaneous Hollowing of Alloy Anode Nanocrystals. Microscopy and Microanalysis, 27(S1), 1972–1973. https://doi.org/10.1017/s1431927621007170
Zhang, J., Wegener, E. C., Samad, N. R., Harris, J. W., Unocic, K. A., Allard, L. F., … Li, Z. (2021). Isolated Metal Sites in Cu–Zn–Y/Beta for Direct and Selective Butene-Rich C3+ Olefin Formation from Ethanol. ACS Catalysis, 11(15), 9885–9897. https://doi.org/10.1021/acscatal.1c02177
Guo, Q., Watkins, T. R., Trofimov, A., Wang, H., Cola, G., Muth, T. R., … Unocic, K. A. (2021). Microstructure Evolution of Low Carbon Steel via Flash Processing. Microscopy and Microanalysis, 27(S1), 156–158. https://doi.org/10.1017/s1431927621001173
Unocic, K. A., Hensley, D. K., Walden, F. S., Bigelow, W. C., Griffin, M. B., Habas, S. E., … Allard, L. F. (2021). Performing In Situ Closed-Cell Gas Reactions in the Transmission Electron Microscope. Journal of Visualized Experiments, 7(173). https://doi.org/10.3791/62174
Unocic, K., Griffin, M., Schaidle, J., Habas, S., Walden, F., Unocic, R., & Allard, L. (2021). Practical Aspects of Performing Quantitive EELS Measurements of Gas Compositions in Closed-Cell Gas Reaction S/TEM. Microscopy and Microanalysis, 27(S1), 796–798. https://doi.org/10.1017/s1431927621003160
Wang, L., Unocic, K. A., Tortorelli, P. F., Santella, M., & Chen, X. F. (2021). Precipitation behavior near shrinkage porosity in a large sand casting of Haynes 282 alloy. Materialia, 15, 101035. https://doi.org/10.1016/j.mtla.2021.101035
Watkins, T. R., Unocic, K. A., Peralta, A., Megahed, M., Bunn, J. R., Fancher, C. M., … Neumann, J. F. (2021). Residual stresses and microstructure within Allvac 718Plus laser powder bed fusion bars. Additive Manufacturing, 47, 102334. https://doi.org/10.1016/j.addma.2021.102334
Cordon, M. J., Zhang, J., Purdy, S. C., Wegener, E. C., Unocic, K. A., Allard, L. F., … Li, Z. (2021). Selective Butene Formation in Direct Ethanol-to-C3+-Olefin Valorization over Zn–Y/Beta and Single-Atom Alloy Composite Catalysts Using In Situ-Generated Hydrogen. ACS Catalysis, 11(12), 7193–7209. https://doi.org/10.1021/acscatal.1c01136
Lardinois, T. M., Bates, J. S., Lippie, H. H., Russell, C. K., Miller, J. T., Meyer, H. M., III, … Gounder, R. (2021). Structural Interconversion between Agglomerated Palladium Domains and Mononuclear Pd(II) Cations in Chabazite Zeolites. Chemistry of Materials, 33(5), 1698–1713. https://doi.org/10.1021/acs.chemmater.0c04465
Huq, N. A., Hafenstine, G. R., Huo, X., Nguyen, H., Tifft, S. M., Conklin, D. R., … Vardon, D. R. (2021). Toward net-zero sustainable aviation fuel with wet waste–derived volatile fatty acids. Proceedings of the National Academy of Sciences, 118(13). https://doi.org/10.1073/pnas.2023008118
Adhikari, S. P., Zhang, J., Guo, Q., Unocic, K. A., Tao, L., & Li, Z. (2020). A hybrid pathway to biojet fuel via 2,3-butanediol. Sustainable Energy & Fuels. https://doi.org/10.1039/D0SE00480D
To, A. T., Wilke, T. J., Nelson, E., Nash, C. P., Bartling, A., Wegener, E. C., … Ruddy, D. A. (2020). Dehydrogenative Coupling of Methanol for the Gas-Phase, One-Step Synthesis of Dimethoxymethane over Supported Copper Catalysts. ACS Sustainable Chemistry & Engineering, 8(32), 12151–12160. https://doi.org/10.1021/acssuschemeng.0c03606
Guo, Q., Kirka, M. M., & Unocic, K. A. (2020). In Situ Transmission Electron Microscopy Study on the Deformation Responses of Additively Manufactured Multiphase Ni-based Superalloy. Microscopy and Microanalysis, 26(S2), 1844–1846. https://doi.org/10.1017/s1431927620019571
Guo, Q., Kirka, M., Lin, L., Shin, D., Peng, J., & Unocic, K. A. (2020). In situ transmission electron microscopy deformation and mechanical responses of additively manufactured Ni-based superalloy. Scripta Materialia, 186, 57–62. https://doi.org/10.1016/j.scriptamat.2020.04.012
Mao, K., Maxim, G., Massey, C., Unocic, K., Edmondson, P., & Field, K. (2020). In-situ Micromechanical Testing of Neutron Irradiated FeCrAl Alloys. Microscopy and Microanalysis, 26(S2), 646–647. https://doi.org/10.1017/s1431927620015391
Unocic, K. A., Walden, F. S., Marthe, N. L., Datye, A. K., Bigelow, W. C., & Allard, L. F. (2020). Introducing and Controlling Water Vapor in Closed-Cell In Situ Electron Microscopy Gas Reactions. Microscopy and Microanalysis, 26(2), 229–239. https://doi.org/10.1017/s1431927620000185
Unocic, K. A., Chen, X., & Tortorelli, P. F. (2020). Microstructural Evaluation of Welded Nickel-Based Superalloy Inconel 740H After Creep Testing. JOM, 72(5), 1811–1821. https://doi.org/10.1007/s11837-020-04119-2
Guo, Q., Meyer, H. M., III, Ievlev, A., Starace, A., Mukarakate, C., Habas, S. E., … Unocic, K. A. (2020). Multi-scale Characterization Study Enabling Deactivation Mechanism in Formed Zeolite Catalyst. Microscopy and Microanalysis, 26(S2), 1270–1271. https://doi.org/10.1017/s1431927620017535
Unocic, K., Griffin, M., Yung, M., Wegener, E., Krause, T., Wang, H., … Meyer, H. (2020). Operando S/TEM Reactions of Pt/TiO2 Catalysts for Catalytic Fast Pyrolysis. Microscopy and Microanalysis, 26(S2), 1696–1697. https://doi.org/10.1017/s1431927620019005
Hafenstine, G. R., Huq, N. A., Conklin, D. R., Wiatrowski, M. R., Huo, X., Guo, Q., … Vardon, D. R. (2020). Single-phase catalysis for reductive etherification of diesel bioblendstocks. Green Chemistry. https://doi.org/10.1039/D0GC00939C
Boebinger, M. G., Yarema, O., Yarema, M., Unocic, K. A., Unocic, R. R., Wood, V., & McDowell, M. T. (2020). Spontaneous and reversible hollowing of alloy anode nanocrystals for stable battery cycling. Nature Nanotechnology, 15(6), 475–481. https://doi.org/10.1038/s41565-020-0690-9
Kane, K. A., Garcia, E., Uwanyuze, S., Lance, M., Unocic, K. A., Sampath, S., & Pint, B. A. (2021). Steam oxidation of ytterbium disilicate environmental barrier coatings with and without a silicon bond coat. Journal of the American Ceramic Society, 104(5), 2285–2300. https://doi.org/10.1111/jace.17650
Pint, B., Wang, H., Hawkins, C., & Unocic, K. (2020). Technical Qualification of New Materials for High Efficiency Coal-Fired Boilers and Other Advanced FE Concepts: Haynes® 282® ASME Boiler and Pressure Vessel Code Case. https://doi.org/10.2172/1649169
Massey, C. P., Edmondson, P. D., Unocic, K. A., Yang, Y., Dryepondt, S. N., Kini, A., … Zinkle, S. J. (2020). The effect of Zr on precipitation in oxide dispersion strengthened FeCrAl alloys. Journal of Nuclear Materials, 533, 152105. https://doi.org/10.1016/j.jnucmat.2020.152105
Mudanyi, R. K., Cramer, C. L., Elliott, A. M., Unocic, K. A., Guo, Q., & Kumar, D. (2021). W-ZrC composites prepared by reactive melt infiltration of Zr2Cu alloy into binder jet 3D printed WC preforms. International Journal of Refractory Metals and Hard Materials, 94, 105411. https://doi.org/10.1016/j.ijrmhm.2020.105411
Jun, J., Unocic, K. A., Lance, M. J., Meyer, H. M., III, & Pint, B. A. (2020). Compatibility of FeCrAlMo with flowing PbLi at 500°-650 °C. Journal of Nuclear Materials, 528, 151847. https://doi.org/10.1016/j.jnucmat.2019.151847
Ghimire, P. P., Zhang, L., Unocic, K. A., Guo, Q., Jiang, B., & Jaroniec, M. (2019). Development of nickel-incorporated MCM-41–carbon composites and their application in nitrophenol reduction. Journal of Materials Chemistry A, 7(16), 9618–9628. https://doi.org/10.1039/c9ta02387a
Pint, B. A., Unocic, K. A., & Keiser, J. (2019). Effect of impurities on supercritical CO2 compatibility. 3rd European supercritical CO2 Conference. Presented at the 3rd European supercritical CO2 Conference, Paris, France.
Settle, A. E., Cleveland, N. S., Farberow, C. A., Conklin, D. R., Huo, X., Dameron, A. A., … Vardon, D. R. (2019). Enhanced Catalyst Durability for Bio-Based Adipic Acid Production by Atomic Layer Deposition. Joule, 3(9), 2219–2240. https://doi.org/10.1016/j.joule.2019.06.022
Unocic, K. A., Kirka, M. M., Cakmak, E., Greeley, D., Okello, A. O., & Dryepondt, S. (2020). Evaluation of additive electron beam melting of haynes 282 alloy. Materials Science and Engineering: A, 772, 138607. https://doi.org/10.1016/j.msea.2019.138607
Thind, A. S., Kavadiya, S., Kouhnavard, M., Wheelus, R., Cho, S. B., Lin, L.-Y., … Mishra, R. (2019). KBaTeBiO6: A Lead-Free, Inorganic Double-Perovskite Semiconductor for Photovoltaic Applications. Chemistry of Materials, 31(13), 4769–4778. https://doi.org/10.1021/acs.chemmater.9b01025
Jun, J., Unocic, K., Petrova, M., Shipilov, S., Carvalhaes, T., Thakur, G. M., … Pint, B. (2019). Methodologies for Evaluation of Corrosion Protection for Ductile Iron Pipe. https://doi.org/10.2172/1528741
Unocic, K. A., Meyer, H. M., Walden, F. S., Marthe, N. L., Bigelow, W. C., & Allard, L. F. (2018). Controlling Water Vapor in Gas-Cell Microscopy Experiments. Microscopy and Microanalysis, 24(S1), 286–287. https://doi.org/10.1017/s1431927618001927
Dryepondt, S., Unocic, K. A., Hoelzer, D. T., Massey, C. P., & Pint, B. A. (2018). Development of low-Cr ODS FeCrAl alloys for accident-tolerant fuel cladding. Journal of Nuclear Materials, 501, 59–71. https://doi.org/10.1016/j.jnucmat.2017.12.035
Ariza, E. A., Poplawsky, J., Guo, W., Unocic, K., Ramirez, A. J., Tschiptschin, A. P., & Babu, S. S. (2018). Evaluation of Carbon Partitioning in New Generation of Quench and Partitioning (Q&P) Steels. Metallurgical and Materials Transactions A, 49(10), 4809–4823. https://doi.org/10.1007/s11661-018-4743-8
Barr, C. M., Nathaniel, J. E., II, Unocic, K. A., Liu, J., Zhang, Y., Wang, Y., & Taheri, M. L. (2018). Exploring radiation induced segregation mechanisms at grain boundaries in equiatomic CoCrFeNiMn high entropy alloy under heavy ion irradiation. Scripta Materialia, 156, 80–84. https://doi.org/10.1016/j.scriptamat.2018.06.041
Unocic, K. A., Choi, J.-S., Ruddy, D. A., Yang, C., Kropf, J., Miller, J., … Habas, S. (2018). In Situ S/TEM Reduction Reaction of Ni-Mo2C Catalyst for Biomass Conversion. Microscopy and Microanalysis, 24(S1), 322–323. https://doi.org/10.1017/s1431927618002106
Kirka, M. M., Unocic, K. A., Kruger, K., & Forsythe, A. (2018). Process Development for Haynes® 282® Using Additive Manufacturing. https://doi.org/10.2172/1435227
Foster, S. J., Carver, K., Dinwiddie, R. B., List, F., III, Unocic, K. A., Chaudhary, A., & Babu, S. S. (2018). Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations. Metallurgical and Materials Transactions A, 49(11), 5775–5798. https://doi.org/10.1007/s11661-018-4870-2
Watkins, T., Unocic, K., Maziasz, P., Bunn, J., Fancher, C., Peralta, A., … Neumann, J. (2018). Residual stress determination of direct metal laser sintered (DMLS) inconel specimens and parts. https://doi.org/10.2172/1415913
Unocic, K. A., Chen, Y., Shin, D., Pint, B. A., & Marquis, E. A. (2018). STEM and APT characterization of scale formation on a La,Hf,Ti-doped NiCrAl model alloy. Micron, 109, 41–52. https://doi.org/10.1016/j.micron.2018.01.011
Unocic, K. A., Shin, D., Sang, X., Cakmak, E., & Tortorelli, P. F. (2019). Single-step aging treatment for a precipitation-strengthened Ni-based alloy and its influence on high-temperature mechanical behavior. Scripta Materialia, 162, 416–420. https://doi.org/10.1016/j.scriptamat.2018.11.045
Pint, B. A., & Unocic, K. A. (2018). The Effect of CO2 Pressure on Chromia Scale Microstructure at 750°C. JOM, 70(8), 1511–1519. https://doi.org/10.1007/s11837-018-2963-4
Pint, B. A., Unocic, K. A., Brese, R. G., & Keiser, J. R. (2017). Characterization of chromia scales formed in supercritical carbon dioxide. Materials at High Temperatures, 35(1-3), 39–49. https://doi.org/10.1080/09603409.2017.1389371
Pawel, S. J., & Unocic, K. A. (2017). Compatibility of an FeCrAl alloy with flowing Pb-Li in a thermal convection loop. Journal of Nuclear Materials, 492, 41–51. https://doi.org/10.1016/j.jnucmat.2017.04.048
Unocic, K. A., Yamamoto, Y., & Pint, B. A. (2017). Effect of Al and Cr Content on Air and Steam Oxidation of FeCrAl Alloys and Commercial APMT Alloy. Oxidation of Metals, 87(3-4), 431–441. https://doi.org/10.1007/s11085-017-9745-1
Meyer, F. W., Han, L., Hijazi, H., Bannister, M. E., Unocic, K. A., Parish, C. M., & Krstic, P. S. (2017). Energy dependence of He-ion-induced tungsten nanofuzz formation at non-normal incidence angles. Nuclear Materials and Energy, 12, 366–371. https://doi.org/10.1016/j.nme.2017.01.013
Bergholz, J., Pint, B. A., Unocic, K. A., & Vaßen, R. (2017). Fabrication of Oxide Dispersion Strengthened Bond Coats with Low Al2O3 Content. Journal of Thermal Spray Technology, 26(5), 868–879. https://doi.org/10.1007/s11666-017-0550-9
Boll, T., Unocic, K. A., Pint, B. A., Mårtensson, A., & Stiller, K. (2017). Grain Boundary Chemistry and Transport Through Alumina Scales on NiAl Alloys. Oxidation of Metals, 88(3-4), 469–479. https://doi.org/10.1007/s11085-016-9697-x
Unocic, K. A., Bergholz, J., Huang, T., Naumenko, D., Pint, B. A., Vaßen, R., & Quadakkers, W. J. (2017). High-temperature behavior of oxide dispersion strengthening CoNiCrAlY. Materials at High Temperatures, 35(1-3), 108–119. https://doi.org/10.1080/09603409.2017.1389423
Unocic, R. R., Sacci, R. L., Sang, X., Unocic, K. A., Veith, G. M., Dudney, N. J., & More, K. L. (2017). In situ Nanoscale Imaging and Spectroscopy of Energy Storage Materials. Microscopy and Microanalysis, 23(S1), 1964–1965. https://doi.org/10.1017/s1431927617010480
Unocic, K. A., Ruddy, D. A., Krause, T. R., & Habas, S. (2017). In situ S/TEM Reduction Reaction of Calcined Cu/BEA-zeolite Catalyst. Microscopy and Microanalysis, 23(S1), 944–945. https://doi.org/10.1017/s1431927617005384
Boll, T., Unocic, K. A., Pint, B. A., & Stiller, K. (2017). Interfaces in Oxides Formed on NiAlCr Doped with Y, Hf, Ti, and B. Microscopy and Microanalysis, 23(2), 396–403. https://doi.org/10.1017/s1431927617000186
Allard, L. F., Meyer, H. M., III, Hensley, D. K., Bigelow, W. C., & Unocic, K. A. (2017). Model “Alloy” Specimens for MEMS-Based Closed-Cell Gas-Reactions. Microscopy and Microanalysis, 23(S1), 908–909. https://doi.org/10.1017/s1431927617005207
Unocic, K. A., Shin, D., Unocic, R. R., & Allard, L. F. (2017). NiAl Oxidation Reaction Processes Studied In Situ Using MEMS-Based Closed-Cell Gas Reaction Transmission Electron Microscopy. Oxidation of Metals, 88(3-4), 495–508. https://doi.org/10.1007/s11085-016-9676-2
Vardon, D. R., Settle, A. E., Vorotnikov, V., Menart, M. J., Eaton, T. R., Unocic, K. A., … Beckham, G. T. (2017). Ru-Sn/AC for the Aqueous-Phase Reduction of Succinic Acid to 1,4-Butanediol under Continuous Process Conditions. ACS Catalysis, 7(9), 6207–6219. https://doi.org/10.1021/acscatal.7b02015
Pint, B. A., & Unocic, K. A. (2017). Steam Oxidation Evaluation of Fe–Cr Alloys for Accident Tolerant Nuclear Fuel Cladding. Oxidation of Metals, 87(3-4), 515–526. https://doi.org/10.1007/s11085-017-9754-0
Unocic, K. A., Datye, A. K., Bigelow, W. C., & Allard, L. F. (2017). Water Vapor in Closed-Cell In Situ Gas Reactions: Initial Experiments. Microscopy and Microanalysis, 23(S1), 940–941. https://doi.org/10.1017/s1431927617005360
Unocic, K. A., Pint, B. A., & Hoelzer, D. T. (2016). Advanced TEM characterization of oxide nanoparticles in ODS Fe–12Cr–5Al alloys. Journal of Materials Science, 51(20), 9190–9206. https://doi.org/10.1007/s10853-016-0111-5
Unocic, K. A., Dryepondt, S., Yamamoto, Y., & Maziasz, P. J. (2016). Creep and Oxidation Behavior of Modified CF8C-Plus with W, Cu, Ni, and Cr. Metallurgical and Materials Transactions A, 47(4), 1641–1653. https://doi.org/10.1007/s11661-016-3348-3
Unocic, K. A., & Hoelzer, D. T. (2016). Evaluation of Pb–17Li compatibility of ODS Fe-12Cr-5Al alloys. Journal of Nuclear Materials, 479, 357–364. https://doi.org/10.1016/j.jnucmat.2016.07.017
Plotkowski, A., Rios, O., Sridharan, N., Sims, Z., Unocic, K., Ott, R. T., … Babu, S. S. (2017). Evaluation of an Al-Ce alloy for laser additive manufacturing. Acta Materialia, 126, 507–519. https://doi.org/10.1016/j.actamat.2016.12.065
Sames, W. J., Unocic, K. A., Helmreich, G. W., Kirka, M. M., Medina, F., Dehoff, R. R., & Babu, S. S. (2017). Feasibility of in situ controlled heat treatment (ISHT) of Inconel 718 during electron beam melting additive manufacturing. Additive Manufacturing, 13, 156–165. https://doi.org/10.1016/j.addma.2016.09.001
Meyer, F. W., Hijazi, H., Bannister, M. E., Unocic, K. A., Garrison, L. M., & Parish, C. M. (2016). Flux threshold measurements of He-ion beam induced nanofuzz formation on hot tungsten surfaces. Physica Scripta, T167, 014019. https://doi.org/10.1088/0031-8949/t167/1/014019
Parish, C. M., Unocic, K. A., Tan, L., Zinkle, S. J., Kondo, S., Snead, L. L., … Katoh, Y. (2017). Helium sequestration at nanoparticle-matrix interfaces in helium + heavy ion irradiated nanostructured ferritic alloys. Journal of Nuclear Materials, 483, 21–34. https://doi.org/10.1016/j.jnucmat.2016.10.038
Duan, R., Jalowicka, A., Unocic, K., Pint, B. A., Huczkowski, P., Chyrkin, A., … Quadakkers, W. J. (2016). Predicting Oxidation-Limited Lifetime of Thin-Walled Components of NiCrW Alloy 230. Oxidation of Metals, 87(1-2), 11–38. https://doi.org/10.1007/s11085-016-9653-9
Pint, B. A., Unocic, K. A., & Allen Haynes, J. (2016). The Effect of Environment on Thermal Barrier Coating Lifetime. Journal of Engineering for Gas Turbines and Power, 138(8). https://doi.org/10.1115/1.4032438
Israelsson, N., Unocic, K. A., Hellström, K., Jonsson, T., Norell, M., Svensson, J.-E., & Johansson, L.-G. (2015). A Microstructural and Kinetic Investigation of the KCl-Induced Corrosion of an FeCrAl Alloy at 600 °C. Oxidation of Metals, 84(1-2), 105–127. https://doi.org/10.1007/s11085-015-9546-3
Allard, L. F., Bigelow, W. C., Wu, Z., Overbury, S. H., Unocic, K. A., Chi, M., … Damiano, J. (2015). Computer-Controlled In Situ Gas Reactions via a MEMS-based Closed-Cell System. Microscopy and Microanalysis, 21(S3), 97–98. https://doi.org/10.1017/s1431927615001282
Israelsson, N., Unocic, K. A., Hellström, K., Svensson, J.-E., & Johansson, L.-G. (2015). Cyclic Corrosion and Chlorination of an FeCrAl Alloy in the Presence of KCl. Oxidation of Metals, 84(3-4), 269–290. https://doi.org/10.1007/s11085-015-9554-3
Pint, B. A., Unocic, K. A., & Terrani, K. A. (2015). Effect of steam on high temperature oxidation behaviour of alumina-forming alloys. Materials at High Temperatures, 32(1-2), 28–35. https://doi.org/10.1179/0960340914z.00000000058
Brady, M. P., Rother, G., Anovitz, L. M., Littrell, K. C., Unocic, K. A., Elsentriecy, H. H., … Davis, B. (2015). Film Breakdown and Nano-Porous Mg(OH)2Formation from Corrosion of Magnesium Alloys in Salt Solutions. Journal of The Electrochemical Society, 162(4), C140–C149. https://doi.org/10.1149/2.0171504jes
Unocic, K. A., Hoelzer, D. T., & Pint, B. A. (2015). Microstructure and environmental resistance of low Cr ODS FeCrAl. Materials at High Temperatures, 32(1-2), 123–132. https://doi.org/10.1179/0960340914z.00000000088
Unocic, R. R., Baggetto, L., Veith, G. M., Aguiar, J. A., Unocic, K. A., Sacci, R. L., … More, K. L. (2015). Probing battery chemistry with liquid cell electron energy loss spectroscopy. Chemical Communications, 51(91), 16377–16380. https://doi.org/10.1039/c5cc07180a
Atkinson, R. W., III, St. John, S., Dyck, O., Unocic, K. A., Unocic, R. R., Burke, C. S., … Papandrew, A. B. (2015). Supportless, Bismuth-Modified Palladium Nanotubes with Improved Activity and Stability for Formic Acid Oxidation. ACS Catalysis, 5(9), 5154–5163. https://doi.org/10.1021/acscatal.5b01239
Song, G.-L., & Unocic, K. A. (2015). The anodic surface film and hydrogen evolution on Mg. Corrosion Science, 98, 758–765. https://doi.org/10.1016/j.corsci.2015.05.047
Taborga Claure, M., Chai, S.-H., Dai, S., Unocic, K. A., Alamgir, F. M., Agrawal, P. K., & Jones, C. W. (2015). Tuning of higher alcohol selectivity and productivity in CO hydrogenation reactions over K/MoS2 domains supported on mesoporous activated carbon and mixed MgAl oxide. Journal of Catalysis, 324, 88–97. https://doi.org/10.1016/j.jcat.2015.01.015
Atkinson, R. W., III, Unocic, R. R., Unocic, K. A., Veith, G. M., Zawodzinski, T. A., Jr., & Papandrew, A. B. (2015). Vapor Synthesis and Thermal Modification of Supportless Platinum–Ruthenium Nanotubes and Application as Methanol Electrooxidation Catalysts. ACS Applied Materials & Interfaces, 7(19), 10115–10124. https://doi.org/10.1021/am508228b
Unocic, K. A., & Pint, B. A. (2014). Alloying and coating strategies for improved Pb–Li compatibility in DEMO-type fusion reactors. Journal of Nuclear Materials, 455(1-3), 330–334. https://doi.org/10.1016/j.jnucmat.2014.06.058
Barr, C. M., Vetterick, G. A., Unocic, K. A., Hattar, K., Bai, X.-M., & Taheri, M. L. (2014). Anisotropic radiation-induced segregation in 316L austenitic stainless steel with grain boundary character. Acta Materialia, 67, 145–155. https://doi.org/10.1016/j.actamat.2013.11.060
Pint, B. A., Dryepondt, S., Unocic, K. A., & Hoelzer, D. T. (2014). Development of ODS FeCrAl for Compatibility in Fusion and Fission Energy Applications. JOM, 66(12), 2458–2466. https://doi.org/10.1007/s11837-014-1200-z
Unocic, K., & Pint, B. (2014). Effect of Environment on the High Temperature Oxidation Behavior of 718 and 718Plus. https://doi.org/10.7449/2014/superalloys_2014_667_677
Unocic, K. A., Leonard, D. N., & Pint, B. A. (2014). Effect of boron on the oxidation behavior of NiCrAlYHfTi in H2O and CO2 environments. Surface and Coatings Technology, 260, 17–22. https://doi.org/10.1016/j.surfcoat.2014.06.074
Nordhorn, C., Mücke, R., Unocic, K. A., Lance, M. J., Pint, B. A., & Vaßen, R. (2014). Effects of thermal cycling parameters on residual stresses in alumina scales of CoNiCrAlY and NiCoCrAlY bond coats. Surface and Coatings Technology, 258, 608–614. https://doi.org/10.1016/j.surfcoat.2014.08.028
Unocic, K. A., Kolbus, L. M., Dehoff, R. R., Dryepondt, S. N., & Pint, B. A. (2014). High-Temperature Oxidation Behavior of Alloy 718 Processed by Additive Manufacturing. Conference Proceedings, CORROSION 2014, NACE International.
Tortorelli, P. F., Wang, H., Unocic, K. A., Santella, M. L., Shingledecker, J. P., & Cedro, V., III. (2014). Long-Term Creep-Rupture Behavior of Inconel® 740 and Haynes® 282. ASME 2014 Symposium on Elevated Temperature Application of Materials for Fossil, Nuclear, and Petrochemical Industries, 29–36. https://doi.org/10.1115/etam2014-1003
Unocic, K. A., Shingledecker, J. P., & Tortorelli, P. F. (2014). Microstructural Changes in Inconel® 740 After Long-Term Aging in the Presence and Absence of Stress. JOM, 66(12), 2535–2542. https://doi.org/10.1007/s11837-014-1208-4
Unocic, K. A., Allard, L. F., Coffey, D. W., More, K. L., & Unocic, R. R. (2014). Novel Method for Precision Controlled Heating of TEM Thin Sections to Study Reaction Processes. Microscopy and Microanalysis, 20(S3), 1628–1629. https://doi.org/10.1017/s1431927614009878
Rouaix-Vande Put, A., Unocic, K. A., Brady, M. P., & Pint, B. A. (2015). Performance of chromia- and alumina-forming Fe- and Ni-base alloys exposed to metal dusting environments: The effect of water vapor and temperature. Corrosion Science, 92, 58–68. https://doi.org/10.1016/j.corsci.2014.11.022
Lance, M. J., Unocic, K. A., Haynes, J. A., & Pint, B. A. (2014). The effect of cycle frequency, H2O and CO2 on TBC lifetime with NiCoCrAlYHfSi bond coatings. Surface and Coatings Technology, 260, 107–112. https://doi.org/10.1016/j.surfcoat.2014.08.082
Sames, W. J., Unocic, K. A., Dehoff, R. R., Lolla, T., & Babu, S. S. (2014). Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting. Journal of Materials Research, 29(17), 1920–1930. https://doi.org/10.1557/jmr.2014.140
Brady, M. P., Fayek, M., Elsentriecy, H. H., Unocic, K. A., Anovitz, L. M., Keiser, J. R., … Davis, B. (2014). Tracer Film Growth Study of Hydrogen and Oxygen from the Corrosion of Magnesium in Water. Journal of The Electrochemical Society, 161(9), C395–C404. https://doi.org/10.1149/2.0821409jes
Unocic, K. A., Elsentriecy, H. H., Brady, M. P., Meyer, H. M., III, Song, G. L., Fayek, M., … Davis, B. (2014). Transmission Electron Microscopy Study of Aqueous Film Formation and Evolution on Magnesium Alloys. Journal of The Electrochemical Society, 161(6), C302–C311. https://doi.org/10.1149/2.024406jes
Unocic, K. A., Lance, M. J., & Pint, B. A. (2013). Characterization of specimens exposed in a Li loop. Journal of Nuclear Materials, 442(1-3), S580–S584. https://doi.org/10.1016/j.jnucmat.2013.04.055
Tortorelli, P. F., Unocic, K. A., Wang, H., Santella, M. L., & Shingledecker, J. P. (2013). Creep-Rupture Behavior of Precipitation-Strengthened Ni-Based Alloys Under Advanced Ultrasupercritical Steam Conditions. In D. Gandy & J. Shingledecker (Eds.), Advances in Materials Technology for Power Plants (Vol. 84666, pp. 131–142). https://doi.org/10.31399/asm.cp.am-epri-2013p0131
Lance, M. J., Unocic, K. A., Haynes, J. A., & Pint, B. A. (2013). Effect of water vapor on thermally-grown alumina scales on Pt-modified and simple aluminide bond coatings. Surface and Coatings Technology, 237, 2–7. https://doi.org/10.1016/j.surfcoat.2013.06.041
Haynes, J. A., Unocic, K. A., Lance, M. J., & Pint, B. A. (2013). Impact of superalloy composition, bond coat roughness and water vapor on TBC lifetime with HVOF NiCoCrAlYHfSi bond coatings. Surface and Coatings Technology, 237, 65–70. https://doi.org/10.1016/j.surfcoat.2013.09.062
Hoelzer, D. T., Unocic, K. A., Sokolov, M. A., & Feng, Z. (2013). Joining of 14YWT and F82H by friction stir welding. Journal of Nuclear Materials, 442(1-3), S529–S534. https://doi.org/10.1016/j.jnucmat.2013.04.027
Unocic, K. A., Brady, M. P., & Pint, B. A. (2013). Oxidation Behavior of Alumina-Forming Austenitic Steel. Conference Proceedings NACE International, CORROSION 2013 Paper, (40982).
Unocic, K. A., & Pint, B. A. (2013). Oxidation behavior of co-doped NiCrAl alloys in dry and wet air. Surface and Coatings Technology, 237, 8–15. https://doi.org/10.1016/j.surfcoat.2013.07.068
Pint, B. A., & Unocic, K. A. (2013). Pb–Li compatibility issues for DEMO. Journal of Nuclear Materials, 442(1-3), S572–S575. https://doi.org/10.1016/j.jnucmat.2013.02.007
Pint, B. A., Unocic, K. A., & Haynes, J. A. (2013). The Effect of Water Vapor Content and CO2 on TBC Lifetime (D. Gandy & J. Shingledecker, Eds.). https://doi.org/10.31399/asm.cp.am-epri-2013p0360
Unocic, K. A., Leonard, D. N., Meyer, H. M., III, Lance, M. J., & Pint, B. A. (2012). Compatibility of V/Y2O3/V-4Cr-4Ti Coatings with Liquid Flowing Li. Conference Proceedings of High-Temperature Corrosion and Protection of Materials (HTCPM8). Presented at the High-Temperature Corrosion and Protection of Materials (HTCPM8), Les Embiez, France.
Unocic, R. R., Baggetto, L., Unocic, K. A., Veith, G. M., Dudney, N. J., & More, K. L. (2012). Coupling EELS/EFTEM Imaging with Environmental Fluid Cell Microscopy. Microscopy and Microanalysis, 18(S2), 1104–1105. https://doi.org/10.1017/s1431927612007374
Unocic, K. A., Essuman, E., Dryepondt, S., & Pint, B. A. (2012). Effect of environment on the scale formed on oxide dispersion strengthened FeCrAl at 1050°C and 1100°C. Materials at High Temperatures, 29(3), 171–180. https://doi.org/10.1179/096034012x13317275660176
Dryepondt, S., Unocic, K. A., & Pint, B. A. (2012). Effect of exposure in steam or argon on the creep properties of Ni‐based alloys. Materials and Corrosion, 63(10), 889–895. https://doi.org/10.1002/maco.201206694
Haynes, J. A., Unocic, K. A., & Pint, B. A. (2013). Effect of water vapor on the 1100°C oxidation behavior of plasma-sprayed TBCs with HVOF NiCoCrAlX bond coatings. Surface and Coatings Technology, 215, 39–45. https://doi.org/10.1016/j.surfcoat.2012.07.099
Unocic, K. A., & Pint, B. A. (2013). Effect of water vapor on thermally grown alumina scales on bond coatings. Surface and Coatings Technology, 215, 30–38. https://doi.org/10.1016/j.surfcoat.2012.08.100
Pint, B. A., & Unocic, K. A. (2012). Ionic segregation on grain boundaries in thermally grown alumina scales. Materials at High Temperatures, 29(3), 257–263. https://doi.org/10.1179/096034012x13343209167745
Pint, B. A., Walker, L. R., & Unocic, K. A. (2012). Material compatibility with isothermal Pb–Li. Materials at High Temperatures, 29(2), 129–135. https://doi.org/10.3184/096034012x13334529777329
Hoelzer, D. T., Unocic, K. A., Coffey, D. W., & Feng, Z. (2012). Microstructural Characterization of Friction Stir Welded Oxide Dispersion Strengthened 14YWT Ferritic Alloy and F82H Tempered Martensitic Steel. Microscopy and Microanalysis, 18(S2), 1658–1659. https://doi.org/10.1017/s1431927612010148
Unocic, K. A., & Pint, B. A. (2012). Microstructure and Chemistry of the Oxide Scale and Pt-containing Coatings Deposited on Superalloy N5. Microscopy and Microanalysis, 18(S2), 1676–1677. https://doi.org/10.1017/s1431927612010239
Rother, G., Keiser, J. R., Brady, M. P., Unocic, K. A., Anovitz, L. M., Littrell, K. C., … Cole, D. R. (2012). Small-angle neutron scattering study of the wet and dry high-temperature oxidation of alumina- and chromia-forming stainless steels. Corrosion Science, 58, 121–132. https://doi.org/10.1016/j.corsci.2012.01.024
Lydon, M. E., Unocic, K. A., Bae, T.-H., Jones, C. W., & Nair, S. (2012). Structure–Property Relationships of Inorganically Surface-Modified Zeolite Molecular Sieves for Nanocomposite Membrane Fabrication. The Journal of Physical Chemistry C, 116(17), 9636–9645. https://doi.org/10.1021/jp301497d
Pint, B., Haynes, J., Unocic, K., & Zhang, Y. (2012). The Effect of Water Vapor and Superalloy Composition on Thermal Barrier Coating Lifetime. https://doi.org/10.7449/2012/superalloys_2012_723_732
Unocic, R. R., Unocic, K. A., Pint, B. A., & Lipschutz, M. D. (2011). Characterization of Pre- and Post-Service Grain Boundary Phases in a Cast Austenitic Steel. https://doi.org/10.1115/gt2011-46710
Unocic, K. A., Parish, C. M., & Pint, B. A. (2011). Characterization of the alumina scale formed on coated and uncoated doped superalloys. Surface and Coatings Technology, 206(7), 1522–1528. https://doi.org/10.1016/j.surfcoat.2011.07.044
Pint, B. A., Brady, M. P., Yamamoto, Y., Unocic, K. A., & Matthews, W. J. (2011). Evaluation of Commercial Alumina-Forming Austenitic Foil for Advanced Recuperators. https://doi.org/10.1115/gt2011-46704
Brady, M. P., Unocic, K. A., Lance, M. J., Santella, M. L., Yamamoto, Y., & Walker, L. R. (2011). Increasing the Upper Temperature Oxidation Limit of Alumina Forming Austenitic Stainless Steels in Air with Water Vapor. Oxidation of Metals, 75(5-6), 337–357. https://doi.org/10.1007/s11085-011-9237-7
Wade, T. C., Coffey, D. W., Ghosh, N., Wittig, J. E., Kang, W. P., Allard, L. F., … Tolk, N. H. (2012). Nanostructure TEM analysis of diamond cold cathode field emitters. Diamond and Related Materials, 22, 29–32. https://doi.org/10.1016/j.diamond.2011.11.007
Vande Put, A., Unocic, K. A., Pint, B. A., & Brady, M. P. (2011). Performance of Alumina-Forming Austenitic Steels, Fe-base and Ni-base alloys exposed to metal dusting environments. Conference Proceedings NACE Corrosion 2011 Conference and Expo. Presented at the NACE Corrosion 2011 Conference and Expo.
Dryepondt, S., Unocic, K. A., & Vande Put, A. (2011). Qualification of New, Commercial ODS Alloys. Annual Conference on Fossil Energy Materials Conference Proceedings. Presented at the Annual Conference on Fossil Energy Materials.
Pint, B. A., Unocic, K. A., Dryepond, S., Maziasz, P. J., & Santella, M. L. (2011). Revival of Interest in Super-Bainitic Steels for Energy Applications. Conference Proceedings Welding and Fabrication Technology for New Power Plants and Components: Second International EPRI Conference. Presented at the Welding and Fabrication Technology for New Power Plants and Components: Second International EPRI Conference, Orlando, FL.
Seyeux, A., Frankel, G. S., Missert, N., Unocic, K. A., Klein, L. H., Galtayries, A., & Marcus, P. (2011). ToF-SIMS Imaging Study of the Early Stages of Corrosion in Al-Cu Thin Films. Journal of The Electrochemical Society, 158(6), C165. https://doi.org/10.1149/1.3568944
Unocic, R., Daehn, G., Unocic, K., Mills, M., & Hayes, R. (2010). A TEM Study of Creep Deformation Mechanisms in Allvac 718Plus®. 7th International Symposium on Superalloy 718 and Derivatives (2010), 607–615. https://doi.org/10.7449/2010/superalloys_2010_607_615
Unocic, K. A., Pint, B. A., & Wright, I. G. (2010). Characterization of Reaction Products from Field Exposed Tubes. EPRI 6th International Conference on Advances in Materials Technology for Fossil Power Plants. Presented at the EPRI 6th International Conference on Advances in Materials Technology for Fossil Power Plants, Santa Fe, NM.
Unocic, K. A., & Pint, B. A. (2010). Characterization of the alumina scale formed on a commercial MCrAlYHfSi coating. Surface and Coatings Technology, 205(5), 1178–1182. https://doi.org/10.1016/j.surfcoat.2010.08.111
Unocic, K., Pint, B., Hayes, R., & Unocic, R. (2010). Effect of Microstucture and Environment on the High-Temperature Oxidation Behavior of Alloy 718Plus®. 7th International Symposium on Superalloy 718 and Derivatives (2010), 977–991. https://doi.org/10.7449/2010/superalloys_2010_977_991
Unocic, K. A., Mills, M. J., & Daehn, G. S. (2010). Effect of gallium focused ion beam milling on preparation of aluminium thin foils. Journal of Microscopy, 240(3), 227–238. https://doi.org/10.1111/j.1365-2818.2010.03401.x
Adhikari, S., Unocic, K. A., Zhai, Y., Frankel, G. S., Zimmerman, J., & Fristad, W. (2011). Hexafluorozirconic acid based surface pretreatments: Characterization and performance assessment. Electrochimica Acta, 56(4), 1912–1924. https://doi.org/10.1016/j.electacta.2010.07.037
Pint, B., Unocic, K., & Dryepondt, S. (2010). Oxidation of Superalloys in Extreme Environments. https://doi.org/10.7449/2010/superalloys_2010_861_875
Sabau, A. S., Wright, I. G., Zhang, W., Pint, B. A., & Unocic, K. A. (2010). Temperature Evolution and Oxide Growth in Water Wall Tubes of Supercritical Unit. Boiler Tube and HRSG Tube Failures and Inspections International Conference. Presented at the Boiler Tube and HRSG Tube Failures and Inspections International Conference, Baltimore, MD.
Unocic, K. A., Hayes, R. W., Mills, M. J., & Daehn, G. S. (2009). Microstructural Features Leading to Enhanced Resistance to Grain Boundary Creep Cracking in ALLVAC 718Plus. Metallurgical and Materials Transactions A, 41(2), 409–420. https://doi.org/10.1007/s11661-009-0099-4
Unocic, K. A., Mills, M. J., & Daehn, G. S. (2008). Challenges in Preparing Aluminum Alloys for Grain Boundary Characterization. Microscopy and Microanalysis, 14(S2), 556–557. https://doi.org/10.1017/s1431927608082305
Unocic, K. A., & Daehn, G. S. (2008). Jacquet-Lucas Award: TEM sample preparation method for grain boundary phase identification in Al-Mg alloys. Advanced Materials & Processes, 166(2), 42–43.
Unocic, K. A., Kobe, P., Mills, M. J., & Daehn, G. S. (2006). Grain Boundary Precipitate Modification for Improved Intergranular Corrosion Resistance. Materials Science Forum, 519-521, 327–332. https://doi.org/10.4028/www.scientific.net/msf.519-521.327
Unocic, K., Mills, M., Daehn, G., & Kobe, P. (2005). Microstructural Analysis of 5XXX Series Aluminum Alloys for Optimal Strength and Corrosion Resistance. Microscopy and Microanalysis, 11(S02). https://doi.org/10.1017/s1431927605508158
Claves, S. R., Janiszewska, K. A., Misiolek, W. Z., & Libura, W. (2004). Metal Flow in Billets of Thin-Walled Extrudates. 8th International Aluminum Extrusion Technology Seminar ET 2004, 55–67. The Aluminum Association & Aluminum Extruders Council.